[3/3] q800: add machine id register

MacOS reads this address to identify the hardware.

This is a basic implementation returning the ID of Quadra 800.

Details:

  http://mess.redump.net/mess/driver_info/mac_technical_notes

"There are 3 ID schemes [...]
 The third and most scalable is a machine ID register at 0x5ffffffc.
 The top word must be 0xa55a to be valid. Then bits 15-11 are 0 for
 consumer Macs, 1 for portables, 2 for high-end 68k, and 3 for high-end
 PowerPC. Bit 10 is 1 if additional ID bits appear elsewhere (e.g. in VIA1).
 The rest of the bits are a per-model identifier.

 Model                          Lower 16 bits of ID
...
 Quadra/Centris 610/650/800     0x2BAD"

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
 hw/m68k/q800.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

On 12/12/2019 20:01, Laurent Vivier wrote:

> MacOS reads this address to identify the hardware.
> 
> This is a basic implementation returning the ID of Quadra 800.
> 
> Details:
> 
>   http://mess.redump.net/mess/driver_info/mac_technical_notes
> 
> "There are 3 ID schemes [...]
>  The third and most scalable is a machine ID register at 0x5ffffffc.
>  The top word must be 0xa55a to be valid. Then bits 15-11 are 0 for
>  consumer Macs, 1 for portables, 2 for high-end 68k, and 3 for high-end
>  PowerPC. Bit 10 is 1 if additional ID bits appear elsewhere (e.g. in VIA1).
>  The rest of the bits are a per-model identifier.
> 
>  Model                          Lower 16 bits of ID
> ...
>  Quadra/Centris 610/650/800     0x2BAD"
> 
> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
> ---
>  hw/m68k/q800.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
> index 9ee0cb1141..c2b2aa779f 100644
> --- a/hw/m68k/q800.c
> +++ b/hw/m68k/q800.c
> @@ -97,6 +97,23 @@ static void main_cpu_reset(void *opaque)
>      cpu->env.pc = ldl_phys(cs->as, 4);
>  }
>  
> +static uint64_t machine_id_read(void *opaque, hwaddr addr, unsigned size)
> +{
> +    return 0xa55a2bad; /* Quadra 800 ID */
> +}
> +
> +static void machine_id_write(void *opaque, hwaddr addr, uint64_t val,
> +                             unsigned size)
> +{
> +}
> +
> +static const MemoryRegionOps machine_id_ops = {
> +    .read = machine_id_read,
> +    .write = machine_id_write,
> +    .valid.min_access_size = 4,
> +    .valid.max_access_size = 4,
> +};

Should there be a .endianness here just to be really safe?

>  static void q800_init(MachineState *machine)
>  {
>      M68kCPU *cpu = NULL;
> @@ -110,6 +127,7 @@ static void q800_init(MachineState *machine)
>      MemoryRegion *rom;
>      MemoryRegion *ram;
>      MemoryRegion *io;
> +    MemoryRegion *machine_id;
>      const int io_slice_nb = (IO_SIZE / IO_SLICE) - 1;
>      int i;
>      ram_addr_t ram_size = machine->ram_size;
> @@ -159,6 +177,10 @@ static void q800_init(MachineState *machine)
>          g_free(name);
>      }
>  
> +    machine_id = g_malloc(sizeof(*machine_id));
> +    memory_region_init_io(machine_id, NULL, &machine_id_ops, NULL, "Machine ID", 4);
> +    memory_region_add_subregion(get_system_memory(), 0x5ffffffc, machine_id);
> +
>      /* djMEMC memory and interrupt controller */
>  
>      djmemc_dev = qdev_create(NULL, TYPE_DJMEMC);

Otherwise looks good and I see it being poked by a MacOS ROM so:

Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>


ATB,

Mark.

On 12/12/19 9:01 PM, Laurent Vivier wrote:
> MacOS reads this address to identify the hardware.
> 
> This is a basic implementation returning the ID of Quadra 800.
> 
> Details:
> 
>    http://mess.redump.net/mess/driver_info/mac_technical_notes
> 
> "There are 3 ID schemes [...]
>   The third and most scalable is a machine ID register at 0x5ffffffc.
>   The top word must be 0xa55a to be valid. Then bits 15-11 are 0 for
>   consumer Macs, 1 for portables, 2 for high-end 68k, and 3 for high-end
>   PowerPC. Bit 10 is 1 if additional ID bits appear elsewhere (e.g. in VIA1).
>   The rest of the bits are a per-model identifier.
> 
>   Model                          Lower 16 bits of ID
> ...
>   Quadra/Centris 610/650/800     0x2BAD"
> 
> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
> ---
>   hw/m68k/q800.c | 22 ++++++++++++++++++++++
>   1 file changed, 22 insertions(+)
> 
> diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
> index 9ee0cb1141..c2b2aa779f 100644
> --- a/hw/m68k/q800.c
> +++ b/hw/m68k/q800.c
> @@ -97,6 +97,23 @@ static void main_cpu_reset(void *opaque)
>       cpu->env.pc = ldl_phys(cs->as, 4);
>   }
>   
> +static uint64_t machine_id_read(void *opaque, hwaddr addr, unsigned size)
> +{
> +    return 0xa55a2bad; /* Quadra 800 ID */
> +}
> +
> +static void machine_id_write(void *opaque, hwaddr addr, uint64_t val,
> +                             unsigned size)
> +{

Maybe worth adding:

        qemu_log_mask(LOG_GUEST_ERROR, ...);

> +}
> +
> +static const MemoryRegionOps machine_id_ops = {
> +    .read = machine_id_read,
> +    .write = machine_id_write,
> +    .valid.min_access_size = 4,
> +    .valid.max_access_size = 4,

I think you want s/valid/impl/, because i.e. the guest could use 16-bit 
access right?

> +};
> +
>   static void q800_init(MachineState *machine)
>   {
>       M68kCPU *cpu = NULL;
> @@ -110,6 +127,7 @@ static void q800_init(MachineState *machine)
>       MemoryRegion *rom;
>       MemoryRegion *ram;
>       MemoryRegion *io;
> +    MemoryRegion *machine_id;
>       const int io_slice_nb = (IO_SIZE / IO_SLICE) - 1;
>       int i;
>       ram_addr_t ram_size = machine->ram_size;
> @@ -159,6 +177,10 @@ static void q800_init(MachineState *machine)
>           g_free(name);
>       }
>   
> +    machine_id = g_malloc(sizeof(*machine_id));

We now prefer g_new(MemoryRegion, 1).

> +    memory_region_init_io(machine_id, NULL, &machine_id_ops, NULL, "Machine ID", 4);
> +    memory_region_add_subregion(get_system_memory(), 0x5ffffffc, machine_id);

To keep the style consistent, can you use a MACHINEID_BASE definition 
instead?

> +
>       /* djMEMC memory and interrupt controller */
>   
>       djmemc_dev = qdev_create(NULL, TYPE_DJMEMC);
>