@@ -4645,10 +4645,16 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
case 1:
break;
case 2:
- scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ else
+ scaledPower = 0;
break;
case 3:
- scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ else
+ scaledPower = 0;
break;
}
@@ -524,10 +524,16 @@ static void ath9k_hw_set_ar9287_power_per_rate_table(struct ath_hw *ah,
case 1:
break;
case 2:
- scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ else
+ scaledPower = 0;
break;
case 3:
- scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ else
+ scaledPower = 0;
break;
}
scaledPower = max((u16)0, scaledPower);
@@ -1543,7 +1543,7 @@ static void iwl4965_temperature_calib(struct iwl_priv *priv)
s32 temp;
temp = iwl4965_hw_get_temperature(priv);
- if (temp < 0)
+ if (IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp))
return;
if (priv->temperature != temp) {
@@ -603,19 +603,27 @@ struct iwl_cfg iwl6050_2abg_cfg = {
IWL_DEVICE_6050,
};
+#define IWL_DEVICE_6150 \
+ .fw_name_pre = IWL6050_FW_PRE, \
+ .ucode_api_max = IWL6050_UCODE_API_MAX, \
+ .ucode_api_min = IWL6050_UCODE_API_MIN, \
+ .ops = &iwl6150_ops, \
+ .eeprom_ver = EEPROM_6150_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \
+ .base_params = &iwl6050_base_params, \
+ .need_dc_calib = true, \
+ .led_mode = IWL_LED_BLINK, \
+ .internal_wimax_coex = true
+
struct iwl_cfg iwl6150_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",
- .fw_name_pre = IWL6050_FW_PRE,
- .ucode_api_max = IWL6050_UCODE_API_MAX,
- .ucode_api_min = IWL6050_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6150_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,
- .ops = &iwl6150_ops,
- .base_params = &iwl6050_base_params,
+ IWL_DEVICE_6150,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .internal_wimax_coex = true,
+};
+
+struct iwl_cfg iwl6150_bg_cfg = {
+ .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG",
+ IWL_DEVICE_6150,
};
struct iwl_cfg iwl6000_3agn_cfg = {
@@ -3831,11 +3831,11 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
/* 6150 WiFi/WiMax Series */
{IWL_PCI_DEVICE(0x0885, 0x1305, iwl6150_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0885, 0x1306, iwl6150_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0885, 0x1307, iwl6150_bg_cfg)},
{IWL_PCI_DEVICE(0x0885, 0x1325, iwl6150_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0885, 0x1326, iwl6150_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0885, 0x1327, iwl6150_bg_cfg)},
{IWL_PCI_DEVICE(0x0886, 0x1315, iwl6150_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0886, 0x1316, iwl6150_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0886, 0x1317, iwl6150_bg_cfg)},
/* 1000 Series WiFi */
{IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
@@ -89,6 +89,7 @@ extern struct iwl_cfg iwl6000_3agn_cfg;
extern struct iwl_cfg iwl6050_2agn_cfg;
extern struct iwl_cfg iwl6050_2abg_cfg;
extern struct iwl_cfg iwl6150_bgn_cfg;
+extern struct iwl_cfg iwl6150_bg_cfg;
extern struct iwl_cfg iwl1000_bgn_cfg;
extern struct iwl_cfg iwl1000_bg_cfg;
extern struct iwl_cfg iwl100_bgn_cfg;
@@ -994,6 +994,8 @@ static void lbs_submit_command(struct lbs_private *priv,
cmd = cmdnode->cmdbuf;
spin_lock_irqsave(&priv->driver_lock, flags);
+ priv->seqnum++;
+ cmd->seqnum = cpu_to_le16(priv->seqnum);
priv->cur_cmd = cmdnode;
spin_unlock_irqrestore(&priv->driver_lock, flags);
@@ -1621,11 +1623,9 @@ struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
/* Copy the incoming command to the buffer */
memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size);
- /* Set sequence number, clean result, move to buffer */
- priv->seqnum++;
+ /* Set command, clean result, move to buffer */
cmdnode->cmdbuf->command = cpu_to_le16(command);
cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size);
- cmdnode->cmdbuf->seqnum = cpu_to_le16(priv->seqnum);
cmdnode->cmdbuf->result = 0;
lbs_deb_host("PREP_CMD: command 0x%04x\n", command);
@@ -1157,6 +1157,9 @@ struct conf_sched_scan_settings {
/* time to wait on the channel for passive scans (in TUs) */
u32 dwell_time_passive;
+ /* time to wait on the channel for DFS scans (in TUs) */
+ u32 dwell_time_dfs;
+
/* number of probe requests to send on each channel in active scans */
u8 num_probe_reqs;
@@ -311,6 +311,7 @@ static struct conf_drv_settings default_conf = {
.min_dwell_time_active = 8,
.max_dwell_time_active = 30,
.dwell_time_passive = 100,
+ .dwell_time_dfs = 150,
.num_probe_reqs = 2,
.rssi_threshold = -90,
.snr_threshold = 0,
@@ -331,16 +331,22 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
int i, j;
u32 flags;
+ bool force_passive = !req->n_ssids;
for (i = 0, j = start;
i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS;
i++) {
flags = req->channels[i]->flags;
- if (!(flags & IEEE80211_CHAN_DISABLED) &&
- ((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) &&
- ((flags & IEEE80211_CHAN_RADAR) == radar) &&
- (req->channels[i]->band == band)) {
+ if (force_passive)
+ flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+
+ if ((req->channels[i]->band == band) &&
+ !(flags & IEEE80211_CHAN_DISABLED) &&
+ (!!(flags & IEEE80211_CHAN_RADAR) == radar) &&
+ /* if radar is set, we ignore the passive flag */
+ (radar ||
+ !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) {
wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
req->channels[i]->band,
req->channels[i]->center_freq);
@@ -350,7 +356,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
wl1271_debug(DEBUG_SCAN, "max_power %d",
req->channels[i]->max_power);
- if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+ if (flags & IEEE80211_CHAN_RADAR) {
+ channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS;
+ channels[j].passive_duration =
+ cpu_to_le16(c->dwell_time_dfs);
+ }
+ else if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
channels[j].passive_duration =
cpu_to_le16(c->dwell_time_passive);
} else {
@@ -359,7 +370,7 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
channels[j].max_duration =
cpu_to_le16(c->max_dwell_time_active);
}
- channels[j].tx_power_att = req->channels[j]->max_power;
+ channels[j].tx_power_att = req->channels[i]->max_power;
channels[j].channel = req->channels[i]->hw_value;
j++;
@@ -386,7 +397,11 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl,
wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
IEEE80211_BAND_2GHZ,
false, false, idx);
- idx += cfg->active[0];
+ /*
+ * 5GHz channels always start at position 14, not immediately
+ * after the last 2.4GHz channel
+ */
+ idx = 14;
cfg->passive[1] =
wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
@@ -394,22 +409,23 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl,
false, true, idx);
idx += cfg->passive[1];
- cfg->active[1] =
+ cfg->dfs =
wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
IEEE80211_BAND_5GHZ,
- false, false, 14);
- idx += cfg->active[1];
+ true, true, idx);
+ idx += cfg->dfs;
- cfg->dfs =
+ cfg->active[1] =
wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
IEEE80211_BAND_5GHZ,
- true, false, idx);
- idx += cfg->dfs;
+ false, false, idx);
+ idx += cfg->active[1];
wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d",
cfg->active[0], cfg->passive[0]);
wl1271_debug(DEBUG_SCAN, " 5GHz: active %d passive %d",
cfg->active[1], cfg->passive[1]);
+ wl1271_debug(DEBUG_SCAN, " DFS: %d", cfg->dfs);
return idx;
}
@@ -421,6 +437,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
struct wl1271_cmd_sched_scan_config *cfg = NULL;
struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
int i, total_channels, ret;
+ bool force_passive = !req->n_ssids;
wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config");
@@ -444,7 +461,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++)
cfg->intervals[i] = cpu_to_le32(req->interval);
- if (req->ssids[0].ssid_len && req->ssids[0].ssid) {
+ if (!force_passive && req->ssids[0].ssid_len && req->ssids[0].ssid) {
cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC;
cfg->ssid_len = req->ssids[0].ssid_len;
memcpy(cfg->ssid, req->ssids[0].ssid,
@@ -461,7 +478,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
goto out;
}
- if (cfg->active[0]) {
+ if (!force_passive && cfg->active[0]) {
ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
req->ssids[0].ssid_len,
ies->ie[IEEE80211_BAND_2GHZ],
@@ -473,7 +490,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
}
}
- if (cfg->active[1]) {
+ if (!force_passive && cfg->active[1]) {
ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
req->ssids[0].ssid_len,
ies->ie[IEEE80211_BAND_5GHZ],
@@ -137,6 +137,9 @@ enum {
SCAN_BSS_TYPE_ANY,
};
+#define SCAN_CHANNEL_FLAGS_DFS BIT(0)
+#define SCAN_CHANNEL_FLAGS_DFS_ENABLED BIT(1)
+
struct conn_scan_ch_params {
__le16 min_duration;
__le16 max_duration;
@@ -1533,6 +1533,31 @@ static void __exit usb_exit(void)
module_init(usb_init);
module_exit(usb_exit);
+static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len,
+ int *actual_length, int timeout)
+{
+ /* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in
+ * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint
+ * descriptor.
+ */
+ struct usb_host_endpoint *ep;
+ unsigned int pipe;
+
+ pipe = usb_sndintpipe(udev, EP_REGS_OUT);
+ ep = usb_pipe_endpoint(udev, pipe);
+ if (!ep)
+ return -EINVAL;
+
+ if (usb_endpoint_xfer_int(&ep->desc)) {
+ return usb_interrupt_msg(udev, pipe, data, len,
+ actual_length, timeout);
+ } else {
+ pipe = usb_sndbulkpipe(udev, EP_REGS_OUT);
+ return usb_bulk_msg(udev, pipe, data, len, actual_length,
+ timeout);
+ }
+}
+
static int usb_int_regs_length(unsigned int count)
{
return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data);
@@ -1648,15 +1673,14 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values,
udev = zd_usb_to_usbdev(usb);
prepare_read_regs_int(usb);
- r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
- req, req_len, &actual_req_len, 50 /* ms */);
+ r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
if (r) {
dev_dbg_f(zd_usb_dev(usb),
- "error in usb_interrupt_msg(). Error number %d\n", r);
+ "error in zd_ep_regs_out_msg(). Error number %d\n", r);
goto error;
}
if (req_len != actual_req_len) {
- dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()\n"
+ dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n"
" req_len %d != actual_req_len %d\n",
req_len, actual_req_len);
r = -EIO;
@@ -1818,9 +1842,17 @@ int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
rw->value = cpu_to_le16(ioreqs[i].value);
}
- usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
- req, req_len, iowrite16v_urb_complete, usb,
- ep->desc.bInterval);
+ /* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode
+ * endpoint is bulk. Select correct type URB by endpoint descriptor.
+ */
+ if (usb_endpoint_xfer_int(&ep->desc))
+ usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
+ req, req_len, iowrite16v_urb_complete, usb,
+ ep->desc.bInterval);
+ else
+ usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT),
+ req, req_len, iowrite16v_urb_complete, usb);
+
urb->transfer_flags |= URB_FREE_BUFFER;
/* Submit previous URB */
@@ -1924,15 +1956,14 @@ int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits)
}
udev = zd_usb_to_usbdev(usb);
- r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
- req, req_len, &actual_req_len, 50 /* ms */);
+ r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
if (r) {
dev_dbg_f(zd_usb_dev(usb),
- "error in usb_interrupt_msg(). Error number %d\n", r);
+ "error in zd_ep_regs_out_msg(). Error number %d\n", r);
goto out;
}
if (req_len != actual_req_len) {
- dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()"
+ dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()"
" req_len %d != actual_req_len %d\n",
req_len, actual_req_len);
r = -EIO;
@@ -1003,8 +1003,12 @@ struct ieee80211_ht_info {
#define WLAN_CAPABILITY_ESS (1<<0)
#define WLAN_CAPABILITY_IBSS (1<<1)
-/* A mesh STA sets the ESS and IBSS capability bits to zero */
-#define WLAN_CAPABILITY_IS_MBSS(cap) \
+/*
+ * A mesh STA sets the ESS and IBSS capability bits to zero.
+ * however, this holds true for p2p probe responses (in the p2p_find
+ * phase) as well.
+ */
+#define WLAN_CAPABILITY_IS_STA_BSS(cap) \
(!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
@@ -906,7 +906,7 @@ static struct l2cap_chan *l2cap_global_chan_by_psm(int state, __le16 psm, bdaddr
if (c->psm == psm) {
/* Exact match. */
if (!bacmp(&bt_sk(sk)->src, src)) {
- read_unlock_bh(&chan_list_lock);
+ read_unlock(&chan_list_lock);
return c;
}
@@ -267,13 +267,35 @@ static bool is_bss(struct cfg80211_bss *a,
return memcmp(ssidie + 2, ssid, ssid_len) == 0;
}
+static bool is_mesh_bss(struct cfg80211_bss *a)
+{
+ const u8 *ie;
+
+ if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability))
+ return false;
+
+ ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
+ a->information_elements,
+ a->len_information_elements);
+ if (!ie)
+ return false;
+
+ ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
+ a->information_elements,
+ a->len_information_elements);
+ if (!ie)
+ return false;
+
+ return true;
+}
+
static bool is_mesh(struct cfg80211_bss *a,
const u8 *meshid, size_t meshidlen,
const u8 *meshcfg)
{
const u8 *ie;
- if (!WLAN_CAPABILITY_IS_MBSS(a->capability))
+ if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability))
return false;
ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
@@ -311,7 +333,7 @@ static int cmp_bss(struct cfg80211_bss *a,
if (a->channel != b->channel)
return b->channel->center_freq - a->channel->center_freq;
- if (WLAN_CAPABILITY_IS_MBSS(a->capability | b->capability)) {
+ if (is_mesh_bss(a) && is_mesh_bss(b)) {
r = cmp_ies(WLAN_EID_MESH_ID,
a->information_elements,
a->len_information_elements,
@@ -457,7 +479,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
struct cfg80211_internal_bss *res)
{
struct cfg80211_internal_bss *found = NULL;
- const u8 *meshid, *meshcfg;
/*
* The reference to "res" is donated to this function.
@@ -470,22 +491,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
res->ts = jiffies;
- if (WLAN_CAPABILITY_IS_MBSS(res->pub.capability)) {
- /* must be mesh, verify */
- meshid = cfg80211_find_ie(WLAN_EID_MESH_ID,
- res->pub.information_elements,
- res->pub.len_information_elements);
- meshcfg = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
- res->pub.information_elements,
- res->pub.len_information_elements);
- if (!meshid || !meshcfg ||
- meshcfg[1] != sizeof(struct ieee80211_meshconf_ie)) {
- /* bogus mesh */
- kref_put(&res->ref, bss_release);
- return NULL;
- }
- }
-
spin_lock_bh(&dev->bss_lock);
found = rb_find_bss(dev, res);
Dave, Here is a batch of fixes intended for 3.0 -- I guess I'll need to rename my tree eventually... :-) Included are a libertas fix to ensure proper sequence number assignment on transmitted frames, an ath9k fix that propogates an earlier fix to a few more places, a fix for a cfg80211 regression caused by some mesh code changes, a locking fix for the bluetooth l2cap code, a zd1211rw regression fix, a collection of small fixes for wl12xx, an iwl4965 fix for a bad temperature check, an a device ID-related fix for iwlagn. Please let me know if there are problems! Thanks, John --- The following changes since commit 9a2e0fb0893ddf595d0a372e681f5b98017c6d90: tg3: Fix tg3_skb_error_unmap() (2011-06-03 00:01:30 -0700) are available in the git repository at: ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git for-davem Daniel Drake (1): libertas: Set command sequence number later to ensure consistency Daniel Halperin (1): ath9k: fix two more bugs in tx power Eliad Peller (1): cfg80211: don't drop p2p probe responses Johannes Berg (1): bluetooth l2cap: fix locking in l2cap_global_chan_by_psm John W. Linville (1): Merge branch 'master' of git://git.kernel.org/.../linville/wireless-2.6 into for-davem Jussi Kivilinna (1): zd1211rw: fix to work on OHCI Luciano Coelho (4): wl12xx: fix passive and radar channel generation for scheduled scan wl12xx: fix DFS channels handling in scheduled scan wl12xx: add separate config value for DFS dwell time on sched scan wl12xx: fix oops in sched_scan when forcing a passive scan Stanislaw Gruszka (1): iwl4965: correctly validate temperature value Wey-Yi Guy (1): iwlagn: fix incorrect PCI subsystem id for 6150 devices drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 10 ++++- drivers/net/wireless/ath/ath9k/eeprom_9287.c | 10 ++++- drivers/net/wireless/iwlegacy/iwl-4965.c | 2 +- drivers/net/wireless/iwlwifi/iwl-6000.c | 28 ++++++++---- drivers/net/wireless/iwlwifi/iwl-agn.c | 6 +- drivers/net/wireless/iwlwifi/iwl-agn.h | 1 + drivers/net/wireless/libertas/cmd.c | 6 +- drivers/net/wireless/wl12xx/conf.h | 3 + drivers/net/wireless/wl12xx/main.c | 1 + drivers/net/wireless/wl12xx/scan.c | 49 +++++++++++++++------- drivers/net/wireless/wl12xx/scan.h | 3 + drivers/net/wireless/zd1211rw/zd_usb.c | 53 +++++++++++++++++++----- include/linux/ieee80211.h | 8 +++- net/bluetooth/l2cap_core.c | 2 +- net/wireless/scan.c | 43 +++++++++++-------- 15 files changed, 155 insertions(+), 70 deletions(-)