diff mbox series

[3/3] ARM: dts: stm32: add thermal sensor support on STM32MP157c

Message ID 1538734081-26585-4-git-send-email-david.hernandezsanchez@st.com
State Not Applicable, archived
Headers show
Series Introduce STM32 thermal driver | expand

Commit Message

David HERNANDEZ SANCHEZ Oct. 5, 2018, 10:08 a.m. UTC 
Add configuration on DT for thermal sensor driver

Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>

--
2.7.4

Comments

Rob Herring (Arm) Oct. 16, 2018, 10:40 p.m. UTC | #1 
On Fri, 5 Oct 2018 10:08:46 +0000, David HERNANDEZ SANCHEZ wrote:
> QWRkIGNvbmZpZ3VyYXRpb24gb24gRFQgZm9yIHRoZXJtYWwgc2Vuc29yIGRyaXZlcg0KDQpTaWdu
> ZWQtb2ZmLWJ5OiBEYXZpZCBIZXJuYW5kZXogU2FuY2hleiA8ZGF2aWQuaGVybmFuZGV6c2FuY2hl
> ekBzdC5jb20+DQoNCmRpZmYgLS1naXQgYS9hcmNoL2FybS9ib290L2R0cy9zdG0zMm1wMTU3Yy5k
> dHNpIGIvYXJjaC9hcm0vYm9vdC9kdHMvc3RtMzJtcDE1N2MuZHRzaQ0KaW5kZXggNjYxYmU5NC4u
> ZTkwYjlmNiAxMDA2NDQNCi0tLSBhL2FyY2gvYXJtL2Jvb3QvZHRzL3N0bTMybXAxNTdjLmR0c2kN
> CisrKyBiL2FyY2gvYXJtL2Jvb3QvZHRzL3N0bTMybXAxNTdjLmR0c2kNCkBAIC04NCw2ICs4NCwz
> MSBAQA0KIAkJfTsNCiAJfTsNCg0KKwl0aGVybWFsLXpvbmVzIHsNCisJCWNwdV90aGVybWFsOiBj
> cHUtdGhlcm1hbCB7DQorCQkJcG9sbGluZy1kZWxheS1wYXNzaXZlID0gPDA+Ow0KKwkJCXBvbGxp
> bmctZGVsYXkgPSA8MD47DQorCQkJdGhlcm1hbC1zZW5zb3JzID0gPCZkdHM+Ow0KKw0KKwkJCXRy
> aXBzIHsNCisJCQkJY3B1X2FsZXJ0MTogY3B1LWFsZXJ0MSB7DQorCQkJCQl0ZW1wZXJhdHVyZSA9
> IDw4NTAwMD47DQorCQkJCQloeXN0ZXJlc2lzID0gPDA+Ow0KKwkJCQkJdHlwZSA9ICJwYXNzaXZl
> IjsNCisJCQkJfTsNCisNCisJCQkJY3B1LWNyaXQgew0KKwkJCQkJdGVtcGVyYXR1cmUgPSA8MTIw
> MDAwPjsNCisJCQkJCWh5c3RlcmVzaXMgPSA8MD47DQorCQkJCQl0eXBlID0gImNyaXRpY2FsIjsN
> CisJCQkJfTsNCisJCQl9Ow0KKw0KKwkJCWNvb2xpbmctbWFwcyB7DQorCQkJfTsNCisJCX07DQor
> CX07DQorDQogCXNvYyB7DQogCQljb21wYXRpYmxlID0gInNpbXBsZS1idXMiOw0KIAkJI2FkZHJl
> c3MtY2VsbHMgPSA8MT47DQpAQCAtOTA4LDYgKzkzMywxNiBAQA0KIAkJCXN0YXR1cyA9ICJkaXNh
> YmxlZCI7DQogCQl9Ow0KDQorCQlkdHM6IHRoZXJtYWxANTAwMjgwMDAgew0KKwkJCWNvbXBhdGli
> bGUgPSAic3Qsc3RtMzItdGhlcm1hbCI7DQorCQkJcmVnID0gPDB4NTAwMjgwMDAgMHgxMDA+Ow0K
> KwkJCWludGVycnVwdHMgPSA8R0lDX1NQSSAxNDcgSVJRX1RZUEVfTEVWRUxfSElHSD47DQorCQkJ
> Y2xvY2tzID0gPCZyY2MgVE1QU0VOUz47DQorCQkJY2xvY2stbmFtZXMgPSAicGNsayI7DQorCQkJ
> I3RoZXJtYWwtc2Vuc29yLWNlbGxzID0gPDA+Ow0KKwkJCXN0YXR1cyA9ICJkaXNhYmxlZCI7DQor
> CQl9Ow0KKw0KIAkJY3J5cDE6IGNyeXBANTQwMDEwMDAgew0KIAkJCWNvbXBhdGlibGUgPSAic3Qs
> c3RtMzJtcDEtY3J5cCI7DQogCQkJcmVnID0gPDB4NTQwMDEwMDAgMHg0MDA+Ow0KLS0NCjIuNy40
> DQo=
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Rob Herring (Arm) Oct. 17, 2018, 2:22 p.m. UTC | #2 
On Tue, Oct 16, 2018 at 5:40 PM Rob Herring <robh@kernel.org> wrote:
>
> On Fri, 5 Oct 2018 10:08:46 +0000, David HERNANDEZ SANCHEZ wrote:
> > QWRkIGNvbmZpZ3VyYXRpb24gb24gRFQgZm9yIHRoZXJtYWwgc2Vuc29yIGRyaXZlcg0KDQpTaWdu
> > ZWQtb2ZmLWJ5OiBEYXZpZCBIZXJuYW5kZXogU2FuY2hleiA8ZGF2aWQuaGVybmFuZGV6c2FuY2hl
> > ekBzdC5jb20+DQoNCmRpZmYgLS1naXQgYS9hcmNoL2FybS9ib290L2R0cy9zdG0zMm1wMTU3Yy5k
> > dHNpIGIvYXJjaC9hcm0vYm9vdC9kdHMvc3RtMzJtcDE1N2MuZHRzaQ0KaW5kZXggNjYxYmU5NC4u
> > ZTkwYjlmNiAxMDA2NDQNCi0tLSBhL2FyY2gvYXJtL2Jvb3QvZHRzL3N0bTMybXAxNTdjLmR0c2kN
> > CisrKyBiL2FyY2gvYXJtL2Jvb3QvZHRzL3N0bTMybXAxNTdjLmR0c2kNCkBAIC04NCw2ICs4NCwz
> > MSBAQA0KIAkJfTsNCiAJfTsNCg0KKwl0aGVybWFsLXpvbmVzIHsNCisJCWNwdV90aGVybWFsOiBj
> > cHUtdGhlcm1hbCB7DQorCQkJcG9sbGluZy1kZWxheS1wYXNzaXZlID0gPDA+Ow0KKwkJCXBvbGxp
> > bmctZGVsYXkgPSA8MD47DQorCQkJdGhlcm1hbC1zZW5zb3JzID0gPCZkdHM+Ow0KKw0KKwkJCXRy
> > aXBzIHsNCisJCQkJY3B1X2FsZXJ0MTogY3B1LWFsZXJ0MSB7DQorCQkJCQl0ZW1wZXJhdHVyZSA9
> > IDw4NTAwMD47DQorCQkJCQloeXN0ZXJlc2lzID0gPDA+Ow0KKwkJCQkJdHlwZSA9ICJwYXNzaXZl
> > IjsNCisJCQkJfTsNCisNCisJCQkJY3B1LWNyaXQgew0KKwkJCQkJdGVtcGVyYXR1cmUgPSA8MTIw
> > MDAwPjsNCisJCQkJCWh5c3RlcmVzaXMgPSA8MD47DQorCQkJCQl0eXBlID0gImNyaXRpY2FsIjsN
> > CisJCQkJfTsNCisJCQl9Ow0KKw0KKwkJCWNvb2xpbmctbWFwcyB7DQorCQkJfTsNCisJCX07DQor
> > CX07DQorDQogCXNvYyB7DQogCQljb21wYXRpYmxlID0gInNpbXBsZS1idXMiOw0KIAkJI2FkZHJl
> > c3MtY2VsbHMgPSA8MT47DQpAQCAtOTA4LDYgKzkzMywxNiBAQA0KIAkJCXN0YXR1cyA9ICJkaXNh
> > YmxlZCI7DQogCQl9Ow0KDQorCQlkdHM6IHRoZXJtYWxANTAwMjgwMDAgew0KKwkJCWNvbXBhdGli
> > bGUgPSAic3Qsc3RtMzItdGhlcm1hbCI7DQorCQkJcmVnID0gPDB4NTAwMjgwMDAgMHgxMDA+Ow0K
> > KwkJCWludGVycnVwdHMgPSA8R0lDX1NQSSAxNDcgSVJRX1RZUEVfTEVWRUxfSElHSD47DQorCQkJ
> > Y2xvY2tzID0gPCZyY2MgVE1QU0VOUz47DQorCQkJY2xvY2stbmFtZXMgPSAicGNsayI7DQorCQkJ
> > I3RoZXJtYWwtc2Vuc29yLWNlbGxzID0gPDA+Ow0KKwkJCXN0YXR1cyA9ICJkaXNhYmxlZCI7DQor
> > CQl9Ow0KKw0KIAkJY3J5cDE6IGNyeXBANTQwMDEwMDAgew0KIAkJCWNvbXBhdGlibGUgPSAic3Qs
> > c3RtMzJtcDEtY3J5cCI7DQogCQkJcmVnID0gPDB4NTQwMDEwMDAgMHg0MDA+Ow0KLS0NCjIuNy40
> > DQo=
> >
>
> Reviewed-by: Rob Herring <robh@kernel.org>

Rest assured that I did review the decoded base64. Please fix your
mailer to not send base64 encoded mails.

Rob
Alexandre TORGUE Dec. 3, 2018, 9:47 a.m. UTC | #3 
Hi David,

On 10/5/18 12:08 PM, David HERNANDEZ SANCHEZ wrote:
> Add configuration on DT for thermal sensor driver
> 
> Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi 
> b/arch/arm/boot/dts/stm32mp157c.dtsi
> index 661be94..e90b9f6 100644
> --- a/arch/arm/boot/dts/stm32mp157c.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157c.dtsi
> @@ -84,6 +84,31 @@

Applied on stm32-next.

Thanks.
Alex
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 661be94..e90b9f6 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -84,6 +84,31 @@ 
 		};
 	};

+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&dts>;
+
+			trips {
+				cpu_alert1: cpu-alert1 {
+					temperature = <85000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -908,6 +933,16 @@ 
 			status = "disabled";
 		};

+		dts: thermal@50028000 {
+			compatible = "st,stm32-thermal";
+			reg = <0x50028000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc TMPSENS>;
+			clock-names = "pclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
 		cryp1: cryp@54001000 {
 			compatible = "st,stm32mp1-cryp";
 			reg = <0x54001000 0x400>;