| Message ID | 5322b1c2-109d-bd0c-7785-697ca6a5324a@cogentembedded.com |
|---|---|
| State | Superseded |
| Delegated to: | Lorenzo Pieralisi |
| Headers | show |
| Series | Add R8A77980 PCIe support & some driver cleanups | expand |
On Fri, Apr 06, 2018 at 02:04:52PM +0300, Sergei Shtylyov wrote: > Now that we've added PCIEPHYSR.PHYRDY polling to rcar_pcie_hw_init(), > there is no need anymore for polling the PHY specific register in > rcar_pcie_hw_init_h1() -- remove it. > > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> This looks good, but has it been tested?
On 04/09/2018 01:56 PM, Simon Horman wrote: >> Now that we've added PCIEPHYSR.PHYRDY polling to rcar_pcie_hw_init(), >> there is no need anymore for polling the PHY specific register in >> rcar_pcie_hw_init_h1() -- remove it. >> >> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> > > This looks good, but has it been tested? Unfortunately, no. Yet it fully matches the R-Car H1 manual v1.00. MBR, Sergei
Index: pci/drivers/pci/host/pcie-rcar.c =================================================================== --- pci.orig/drivers/pci/host/pcie-rcar.c +++ pci/drivers/pci/host/pcie-rcar.c @@ -102,7 +102,6 @@ #define LANE_POS 8 #define ADR_POS 0 #define H1_PCIEPHYDOUTR 0x040014 -#define H1_PCIEPHYSR 0x040018 /* R-Car Gen2 PHY */ #define GEN2_PCIEPHYADDR 0x780 @@ -627,8 +626,6 @@ static int rcar_pcie_hw_init(struct rcar static int rcar_pcie_hw_init_h1(struct rcar_pcie *pcie) { - unsigned int timeout = 10; - /* Initialize the phy */ phy_write_reg(pcie, 0, 0x42, 0x1, 0x0EC34191); phy_write_reg(pcie, 1, 0x42, 0x1, 0x0EC34180); @@ -647,14 +644,7 @@ static int rcar_pcie_hw_init_h1(struct r phy_write_reg(pcie, 0, 0x64, 0x1, 0x3F0F1F0F); phy_write_reg(pcie, 0, 0x66, 0x1, 0x00008000); - while (timeout--) { - if (rcar_pci_read_reg(pcie, H1_PCIEPHYSR)) - return rcar_pcie_hw_init(pcie); - - msleep(5); - } - - return -ETIMEDOUT; + return rcar_pcie_hw_init(pcie); } static int rcar_pcie_hw_init_gen2(struct rcar_pcie *pcie)
Now that we've added PCIEPHYSR.PHYRDY polling to rcar_pcie_hw_init(), there is no need anymore for polling the PHY specific register in rcar_pcie_hw_init_h1() -- remove it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- drivers/pci/host/pcie-rcar.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)