[v4,1/2] PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver DT bindings

This patch adds the DT bindings for Mobiveil PCIe Host Bridge
IP driver and updates the vendor prefixes file.

Signed-off-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
Cc: bhelgaas@google.com
Cc: lorenzo.pieralisi@arm.com
Cc: linux-pci@vger.kernel.org
Cc: devicetree@vger.kernel.org

---
Fixes:
- used git mailer, as tabs were converted to spaces by thunderbird before
- moved the entry to corrrect alphabetical order in vendor-prefixes.txt
- DT binding file was modified to take care of v3 review comments

 .../devicetree/bindings/pci/mobiveil-pcie.txt      | 73 ++++++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 2 files changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/mobiveil-pcie.txt

On Tue, Nov 28, 2017 at 09:17:28AM -0500, Subrahmanya Lingappa wrote:
> This patch adds the DT bindings for Mobiveil PCIe Host Bridge
> IP driver and updates the vendor prefixes file.
> 
> Signed-off-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
> Cc: bhelgaas@google.com
> Cc: lorenzo.pieralisi@arm.com
> Cc: linux-pci@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> 
> ---
> Fixes:
> - used git mailer, as tabs were converted to spaces by thunderbird before
> - moved the entry to corrrect alphabetical order in vendor-prefixes.txt
> - DT binding file was modified to take care of v3 review comments
> 
>  .../devicetree/bindings/pci/mobiveil-pcie.txt      | 73 ++++++++++++++++++++++
>  .../devicetree/bindings/vendor-prefixes.txt        |  1 +
>  2 files changed, 74 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/mobiveil-pcie.txt

A few typos, otherwise:

Acked-by: Rob Herring <robh@kernel.org>

> 
> diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
> new file mode 100644
> index 0000000..9f3160d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
> @@ -0,0 +1,73 @@
> +* Mobiveil AXI PCIe Root Port Bridge DT description
> +
> +Mobiveil's GPEX 4.0 is PCIe gen4 a root port bridge IP. This configurable IP

...is a PCIe Gen4 root port...

> +has upto 8 outbound and inbound windows for the address translation.

s/upto/up to/

> +
> +Required properties:
> +- #address-cells: Address representation for root ports, set to <3>
> +- #size-cells: Size representation for root ports, set to <2>
> +- #interrupt-cells: specifies the number of cells needed to encode an
> +	interrupt source. The value must be 1.
> +- compatible: Should contain "mbvl,gpex40-pcie"
> +- reg: Should contain PCIe registers location and length
> +	"config_axi_slave": PCIe controller registers
> +	"csr_axi_slave"	  : Bridge config registers
> +	"gpio_slave"	  : GPIO registers to control slot power
> +	"apb_csr"	  : MSI registers
> +
> +- device_type: must be "pci"
> +- apio-wins : number of requested apio outbound windows
> +		default 2 outbound windows are configured -
> +		1. Config window
> +		2. Memory window
> +- ppio-wins : number of requested ppio inbound windows
> +		default 1 inbound memory window is configured.
> +- bus-range: PCI bus numbers covered
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #interrupt-cells: specifies the number of cells needed to encode an
> +	interrupt source. The value must be 1.
> +- interrupt-parent : phandle to the interrupt controller that
> +		it is attached to, it should be set to gic to point to
> +		ARM's Generic Interrupt Controller node in system DT.
> +- interrupts: The interrupt line of the PCIe controller
> +		last cell of this fild is set to 4 to

s/fild/field/

> +		denote it as IRQ_TYPE_LEVEL_HIGH type interrupt.
> +- interrupt-map-mask,
> +	interrupt-map: standard PCI properties to define the mapping of the
> +	PCI interface to interrupt numbers.
> +- ranges: ranges for the PCI memory regions (I/O space region is not
> +	supported by hardware)
> +	Please refer to the standard PCI bus binding document for a more
> +	detailed explanation
> +
> +
> +Example:
> +++++++++
> +	pcie0: pcie@a0000000 {
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		compatible = "mbvl,gpex40-pcie";
> +		reg =	<0xa0000000 0x00001000>,
> +			<0xb0000000 0x00010000>,
> +			<0xff000000 0x00200000>,
> +			<0xb0010000 0x00001000>;
> +		reg-names =	"config_axi_slave",
> +				"csr_axi_slave",
> +				"gpio_slave",
> +				"apb_csr";
> +		device_type = "pci";
> +		apio-wins = <2>;
> +		ppio-wins = <1>;
> +		bus-range = <0x00000000 0x000000ff>;
> +		interrupt-controller;
> +		interrupt-parent = <&gic>;
> +		#interrupt-cells = <1>;
> +		interrupts = < 0 89 4 >;
> +		interrupt-map-mask = <0 0 0 7>;
> +		interrupt-map = <0 0 0 1 &pci_express 1>,
> +				<0 0 0 2 &pci_express 2>,
> +				<0 0 0 3 &pci_express 3>,
> +				<0 0 0 4 &pci_express 4>;
> +		ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
> +
> +	};
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 0994bdd..8263cc7 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -197,6 +197,7 @@ lwn	Liebherr-Werk Nenzing GmbH
>  macnica	Macnica Americas
>  marvell	Marvell Technology Group Ltd.
>  maxim	Maxim Integrated Products
> +mbvl	Mobiveil Inc.
>  mcube	mCube
>  meas	Measurement Specialties
>  mediatek	MediaTek Inc.
> -- 
> 1.8.3.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html