diff mbox

[v4,2/2] mtd: m25p80: Added pm ops support

Message ID 1487086368-4118-3-git-send-email-kdasu.kdev@gmail.com
State Superseded
Delegated to: Cyrille Pitchen
Headers show

Commit Message

Kamal Dasu Feb. 14, 2017, 3:32 p.m. UTC
Added power management ops for resume to be able to resan spi-nor
device and set it to right transfer modes in its probed state after
poweron. Some SoC implementations might  power down the spi-nor flash
and loose its initial settings on suspend. A resume should retore the
part to its probed state.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/mtd/devices/m25p80.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Marek Vasut Feb. 18, 2017, 10:31 p.m. UTC | #1
On 02/14/2017 04:32 PM, Kamal Dasu wrote:
> Added power management ops for resume to be able to resan spi-nor

rescan ... but you're not really rescanning it, are you ? You're just
reconfiguring the pre-suspend parameters .

> device and set it to right transfer modes in its probed state after
> poweron. Some SoC implementations might  power down the spi-nor flash
> and loose its initial settings on suspend. A resume should retore the

restore ...

> part to its probed state.
> 
> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
> ---
>  drivers/mtd/devices/m25p80.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index c4df3b1..3ab30b2 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -324,10 +324,21 @@ static int m25p_remove(struct spi_device *spi)
>  };
>  MODULE_DEVICE_TABLE(of, m25p_of_table);
>  
> +#ifdef CONFIG_PM_SLEEP
> +static int m25p_resume(struct device *dev)
> +{
> +	struct m25p *flash = dev_get_drvdata(dev);
> +
> +	return spi_nor_init(&flash->spi_nor);
> +}
> +#endif
> +static SIMPLE_DEV_PM_OPS(m25p_pm_ops, NULL, m25p_resume);
> +
>  static struct spi_driver m25p80_driver = {
>  	.driver = {
>  		.name	= "m25p80",
>  		.of_match_table = m25p_of_table,
> +		.pm     = &m25p_pm_ops,
>  	},
>  	.id_table	= m25p_ids,
>  	.probe	= m25p_probe,
>
Kamal Dasu Feb. 19, 2017, 9:48 a.m. UTC | #2
On Sat, Feb 18, 2017 at 5:31 PM, Marek Vasut <marex@denx.de> wrote:
> On 02/14/2017 04:32 PM, Kamal Dasu wrote:
>> Added power management ops for resume to be able to resan spi-nor
>
> rescan ... but you're not really rescanning it, are you ? You're just
> reconfiguring the pre-suspend parameters .
>
>> device and set it to right transfer modes in its probed state after
>> poweron. Some SoC implementations might  power down the spi-nor flash
>> and loose its initial settings on suspend. A resume should retore the
>
> restore ...
>
>> part to its probed state.
>>

Will fix typos.

>> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
>> ---
>>  drivers/mtd/devices/m25p80.c | 11 +++++++++++
>>  1 file changed, 11 insertions(+)
>>
>> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
>> index c4df3b1..3ab30b2 100644
>> --- a/drivers/mtd/devices/m25p80.c
>> +++ b/drivers/mtd/devices/m25p80.c
>> @@ -324,10 +324,21 @@ static int m25p_remove(struct spi_device *spi)
>>  };
>>  MODULE_DEVICE_TABLE(of, m25p_of_table);
>>
>> +#ifdef CONFIG_PM_SLEEP
>> +static int m25p_resume(struct device *dev)
>> +{
>> +     struct m25p *flash = dev_get_drvdata(dev);
>> +
>> +     return spi_nor_init(&flash->spi_nor);
>> +}
>> +#endif
>> +static SIMPLE_DEV_PM_OPS(m25p_pm_ops, NULL, m25p_resume);
>> +
>>  static struct spi_driver m25p80_driver = {
>>       .driver = {
>>               .name   = "m25p80",
>>               .of_match_table = m25p_of_table,
>> +             .pm     = &m25p_pm_ops,
>>       },
>>       .id_table       = m25p_ids,
>>       .probe  = m25p_probe,
>>
>
>
> --
> Best regards,
> Marek Vasut

Thanks
Kamal
diff mbox

Patch

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index c4df3b1..3ab30b2 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -324,10 +324,21 @@  static int m25p_remove(struct spi_device *spi)
 };
 MODULE_DEVICE_TABLE(of, m25p_of_table);
 
+#ifdef CONFIG_PM_SLEEP
+static int m25p_resume(struct device *dev)
+{
+	struct m25p *flash = dev_get_drvdata(dev);
+
+	return spi_nor_init(&flash->spi_nor);
+}
+#endif
+static SIMPLE_DEV_PM_OPS(m25p_pm_ops, NULL, m25p_resume);
+
 static struct spi_driver m25p80_driver = {
 	.driver = {
 		.name	= "m25p80",
 		.of_match_table = m25p_of_table,
+		.pm     = &m25p_pm_ops,
 	},
 	.id_table	= m25p_ids,
 	.probe	= m25p_probe,