Message ID | 1457713887-7748-1-git-send-email-geert+renesas@glider.be |
---|---|
State | New |
Headers | show |
On 12/03/2016 12:31 AM, Geert Uytterhoeven wrote: > pca953x_gpio_set_multiple() divides by 4 to convert from longs to bytes, > which assumes a 32-bit platform, and is not correct on 64-bit platforms. > Use "sizeof(...)" instead to fix this. > > Fixes: b4818afeacbd8182 ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.") > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Phil Reid <preid@electromag.com.au> > --- > Untested, found by code inspection. > > This bug was introduced in v4.5-rc1, but unless Linus (the other one ;-) > will make a v4.5-rc8, it's probably too late to get this fixed in v4.5. > --- > drivers/gpio/gpio-pca953x.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c > index 23196c5fc17ceb6b..99b375c959987fe9 100644 > --- a/drivers/gpio/gpio-pca953x.c > +++ b/drivers/gpio/gpio-pca953x.c > @@ -367,9 +367,11 @@ static void pca953x_gpio_set_multiple(struct gpio_chip *gc, > memcpy(reg_val, chip->reg_output, NBANK(chip)); > mutex_lock(&chip->i2c_lock); > for(bank=0; bank<NBANK(chip); bank++) { > - unsigned bankmask = mask[bank/4] >> ((bank % 4) * 8); > + unsigned bankmask = mask[bank / sizeof(*mask)] >> > + ((bank % sizeof(*mask)) * 8); > if(bankmask) { > - unsigned bankval = bits[bank/4] >> ((bank % 4) * 8); > + unsigned bankval = bits[bank / sizeof(*bits)] >> > + ((bank % sizeof(*bits)) * 8); > reg_val[bank] = (reg_val[bank] & ~bankmask) | bankval; > } > } >
On Fri, Mar 11, 2016 at 5:31 PM, Geert Uytterhoeven <geert+renesas@glider.be> wrote: > pca953x_gpio_set_multiple() divides by 4 to convert from longs to bytes, > which assumes a 32-bit platform, and is not correct on 64-bit platforms. > Use "sizeof(...)" instead to fix this. > > Fixes: b4818afeacbd8182 ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.") > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Patch applied for fixes. Tagged for stable. Ack from Phil. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 23196c5fc17ceb6b..99b375c959987fe9 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -367,9 +367,11 @@ static void pca953x_gpio_set_multiple(struct gpio_chip *gc, memcpy(reg_val, chip->reg_output, NBANK(chip)); mutex_lock(&chip->i2c_lock); for(bank=0; bank<NBANK(chip); bank++) { - unsigned bankmask = mask[bank/4] >> ((bank % 4) * 8); + unsigned bankmask = mask[bank / sizeof(*mask)] >> + ((bank % sizeof(*mask)) * 8); if(bankmask) { - unsigned bankval = bits[bank/4] >> ((bank % 4) * 8); + unsigned bankval = bits[bank / sizeof(*bits)] >> + ((bank % sizeof(*bits)) * 8); reg_val[bank] = (reg_val[bank] & ~bankmask) | bankval; } }
pca953x_gpio_set_multiple() divides by 4 to convert from longs to bytes, which assumes a 32-bit platform, and is not correct on 64-bit platforms. Use "sizeof(...)" instead to fix this. Fixes: b4818afeacbd8182 ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- Untested, found by code inspection. This bug was introduced in v4.5-rc1, but unless Linus (the other one ;-) will make a v4.5-rc8, it's probably too late to get this fixed in v4.5. --- drivers/gpio/gpio-pca953x.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)