| Message ID | 1456672738-4993-5-git-send-email-vishnupatekar0510@gmail.com |
|---|---|
| State | New |
| Headers | show |
On Sun, Feb 28, 2016 at 7:18 AM, Vishnu Patekar <vishnupatekar0510@gmail.com> wrote: > This adds A83T system bus clocks, bus gates, and clock resets. > > Three ahb reset registers are combined into one node. > > Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> > --- > arch/arm/boot/dts/sun8i-a83t.dtsi | 114 +++++++++++++++++++++++++++++++++++++- > 1 file changed, 112 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi > index d3473f8..fa7ded5 100644 > --- a/arch/arm/boot/dts/sun8i-a83t.dtsi > +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi > @@ -146,6 +146,97 @@ > clocks = <&osc16M>; > clock-output-names = "osc16M-d512"; > }; > + > + pll6: clk@01c20028 { > + #clock-cells = <0>; > + compatible = "allwinner,sun9i-a80-pll4-clk"; > + reg = <0x01c20028 0x4>; > + clocks = <&osc24M>; > + clock-output-names = "pll6"; > + }; > + > + pll6d2: pll6d2_clk { > + #clock-cells = <0>; > + compatible = "fixed-factor-clock"; > + clock-div = <2>; > + clock-mult = <1>; > + clocks = <&pll6>; > + clock-output-names = "pll6d2"; > + }; > + > + ahb1: clk@01c20054 { > + #clock-cells = <0>; > + compatible = "allwinner,sun8i-a83t-ahb1-clk"; > + reg = <0x01c20054 0x4>; > + clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&pll6>; > + clock-output-names = "ahb1"; > + }; > + > + apb1: apb1_clk@01c20054 { > + #clock-cells = <0>; > + compatible = "allwinner,sun8i-a83t-apb1-clk"; > + reg = <0x01c20054 0x4>; > + clocks = <&ahb1>; > + clock-output-names = "apb1"; > + }; > + > + apb2: clk@01c20058 { > + #clock-cells = <0>; > + compatible = "allwinner,sun4i-a10-apb1-clk"; > + reg = <0x01c20058 0x4>; > + clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&pll6>; > + clock-output-names = "apb2"; > + }; > + > + ahb2: clk@01c2005c { > + #clock-cells = <0>; > + compatible = "allwinner,sun8i-h3-ahb2-clk"; > + reg = <0x01c2005c 0x4>; > + clocks = <&ahb1>, <&pll6d2>; > + clock-output-names = "ahb2"; > + }; > + > + bus_gates: clk@01c20060 { > + #clock-cells = <1>; > + compatible = "allwinner,sun8i-a83t-bus-gates-clk"; > + reg = <0x01c20060 0x10>; > + clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; > + clock-names = "ahb1", "ahb2", "apb1", "apb2"; > + clock-indices = <1>, <5>, <6>, > + <8>, <9>, <10>, > + <13>, <14>, <17>, > + <19>, <20>, > + <21>, <24>, > + <26>, <27>, > + <29>, <32>, > + <36>, <37>, > + <40>, <43>, > + <44>, <52>, <53>, > + <54>, <65>, > + <69>, <76>, <77>, > + <78>, <79>, <96>, > + <97>, <98>, > + <112>, <113>, > + <114>, <115>, > + <116>; > + clock-output-names = "bus_mipidsi", "bus_ss", "bus_dma", > + "bus_mmc0", "bus_mmc1", "bus_mmc2", > + "bus_nand", "bus_sdram", "bus_emac", > + "bus_hstimer", "bus_spi0", > + "bus_spi1", "bus_usb_otg", > + "bus_ehci0", "bus_ehci1", > + "bus_ohci0", "bus_ve", > + "bus_lcd0", "bus_lcd1", > + "bus_csi", "bus_hdmi", > + "bus_de", "bus_gpu", "bus_msgbox", > + "bus_spinlock", "bus_spidf", "spdif". See https://en.wikipedia.org/wiki/S/PDIF > + "bus_pio", "bus_i2s0", "bus_i2s1", > + "bus_i2s2", "bus_tdm", "bus_i2c0", > + "bus_i2c1", "bus_i2c2", > + "bus_uart0", "bus_uart1", > + "bus_uart2", "bus_uart3", > + "bus_uart4"; > + }; > }; > > soc { > @@ -160,7 +251,7 @@ > <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; > reg = <0x01c20800 0x400>; > - clocks = <&osc24M>; > + clocks = <&bus_gates 69>; > gpio-controller; > interrupt-controller; > #interrupt-cells = <3>; > @@ -189,12 +280,31 @@ > }; > }; > > + ahb_reset: reset@01c202c0 { > + reg = <0x01c202c0 0xc>; > + compatible = "allwinner,sun6i-a31-clock-reset"; > + #reset-cells = <1>; > + }; > + > + apb1_reset: reset@01c202d0 { > + reg = <0x01c202d0 0x4>; > + compatible = "allwinner,sun6i-a31-clock-reset"; > + #reset-cells = <1>; > + }; > + > + apb2_reset: reset@01c202d8 { > + reg = <0x01c202d8 0x4>; > + compatible = "allwinner,sun6i-a31-clock-reset"; > + #reset-cells = <1>; > + }; > + > timer@01c20c00 { > compatible = "allwinner,sun4i-a10-timer"; > reg = <0x01c20c00 0xa0>; > interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&osc24M>; > + clocks = <&bus_gates 112>; > + resets = <&apb2_reset 16>; These 2 were in uart0 in v1. Clearly something went wrong. ChenYu > }; > > watchdog@01c20ca0 { > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Wens, On Mon, Feb 29, 2016 at 1:29 AM, Chen-Yu Tsai <wens@csie.org> wrote: > On Sun, Feb 28, 2016 at 7:18 AM, Vishnu Patekar > <vishnupatekar0510@gmail.com> wrote: >> This adds A83T system bus clocks, bus gates, and clock resets. >> >> Three ahb reset registers are combined into one node. >> >> Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> >> --- >> arch/arm/boot/dts/sun8i-a83t.dtsi | 114 +++++++++++++++++++++++++++++++++++++- >> 1 file changed, 112 insertions(+), 2 deletions(-) >> >> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi >> index d3473f8..fa7ded5 100644 >> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi >> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi >> @@ -146,6 +146,97 @@ >> clocks = <&osc16M>; >> clock-output-names = "osc16M-d512"; >> }; >> + >> + pll6: clk@01c20028 { >> + #clock-cells = <0>; >> + compatible = "allwinner,sun9i-a80-pll4-clk"; >> + reg = <0x01c20028 0x4>; >> + clocks = <&osc24M>; >> + clock-output-names = "pll6"; >> + }; >> + >> + pll6d2: pll6d2_clk { >> + #clock-cells = <0>; >> + compatible = "fixed-factor-clock"; >> + clock-div = <2>; >> + clock-mult = <1>; >> + clocks = <&pll6>; >> + clock-output-names = "pll6d2"; >> + }; >> + >> + ahb1: clk@01c20054 { >> + #clock-cells = <0>; >> + compatible = "allwinner,sun8i-a83t-ahb1-clk"; >> + reg = <0x01c20054 0x4>; >> + clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&pll6>; >> + clock-output-names = "ahb1"; >> + }; >> + >> + apb1: apb1_clk@01c20054 { >> + #clock-cells = <0>; >> + compatible = "allwinner,sun8i-a83t-apb1-clk"; >> + reg = <0x01c20054 0x4>; >> + clocks = <&ahb1>; >> + clock-output-names = "apb1"; >> + }; >> + >> + apb2: clk@01c20058 { >> + #clock-cells = <0>; >> + compatible = "allwinner,sun4i-a10-apb1-clk"; >> + reg = <0x01c20058 0x4>; >> + clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&pll6>; >> + clock-output-names = "apb2"; >> + }; >> + >> + ahb2: clk@01c2005c { >> + #clock-cells = <0>; >> + compatible = "allwinner,sun8i-h3-ahb2-clk"; >> + reg = <0x01c2005c 0x4>; >> + clocks = <&ahb1>, <&pll6d2>; >> + clock-output-names = "ahb2"; >> + }; >> + >> + bus_gates: clk@01c20060 { >> + #clock-cells = <1>; >> + compatible = "allwinner,sun8i-a83t-bus-gates-clk"; >> + reg = <0x01c20060 0x10>; >> + clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; >> + clock-names = "ahb1", "ahb2", "apb1", "apb2"; >> + clock-indices = <1>, <5>, <6>, >> + <8>, <9>, <10>, >> + <13>, <14>, <17>, >> + <19>, <20>, >> + <21>, <24>, >> + <26>, <27>, >> + <29>, <32>, >> + <36>, <37>, >> + <40>, <43>, >> + <44>, <52>, <53>, >> + <54>, <65>, >> + <69>, <76>, <77>, >> + <78>, <79>, <96>, >> + <97>, <98>, >> + <112>, <113>, >> + <114>, <115>, >> + <116>; >> + clock-output-names = "bus_mipidsi", "bus_ss", "bus_dma", >> + "bus_mmc0", "bus_mmc1", "bus_mmc2", >> + "bus_nand", "bus_sdram", "bus_emac", >> + "bus_hstimer", "bus_spi0", >> + "bus_spi1", "bus_usb_otg", >> + "bus_ehci0", "bus_ehci1", >> + "bus_ohci0", "bus_ve", >> + "bus_lcd0", "bus_lcd1", >> + "bus_csi", "bus_hdmi", >> + "bus_de", "bus_gpu", "bus_msgbox", >> + "bus_spinlock", "bus_spidf", > > "spdif". See https://en.wikipedia.org/wiki/S/PDIF I'll correct. > >> + "bus_pio", "bus_i2s0", "bus_i2s1", >> + "bus_i2s2", "bus_tdm", "bus_i2c0", >> + "bus_i2c1", "bus_i2c2", >> + "bus_uart0", "bus_uart1", >> + "bus_uart2", "bus_uart3", >> + "bus_uart4"; >> + }; >> }; >> >> soc { >> @@ -160,7 +251,7 @@ >> <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, >> <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; >> reg = <0x01c20800 0x400>; >> - clocks = <&osc24M>; >> + clocks = <&bus_gates 69>; >> gpio-controller; >> interrupt-controller; >> #interrupt-cells = <3>; >> @@ -189,12 +280,31 @@ >> }; >> }; >> >> + ahb_reset: reset@01c202c0 { >> + reg = <0x01c202c0 0xc>; >> + compatible = "allwinner,sun6i-a31-clock-reset"; >> + #reset-cells = <1>; >> + }; >> + >> + apb1_reset: reset@01c202d0 { >> + reg = <0x01c202d0 0x4>; >> + compatible = "allwinner,sun6i-a31-clock-reset"; >> + #reset-cells = <1>; >> + }; >> + >> + apb2_reset: reset@01c202d8 { >> + reg = <0x01c202d8 0x4>; >> + compatible = "allwinner,sun6i-a31-clock-reset"; >> + #reset-cells = <1>; >> + }; >> + >> timer@01c20c00 { >> compatible = "allwinner,sun4i-a10-timer"; >> reg = <0x01c20c00 0xa0>; >> interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, >> <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; >> - clocks = <&osc24M>; >> + clocks = <&bus_gates 112>; >> + resets = <&apb2_reset 16>; > > These 2 were in uart0 in v1. Clearly something went wrong. True, I messed it up, I'll correct this also. This is uart0 reset and clock gate. Sorry, for these typos, I will be more careful. > > ChenYu > >> }; >> >> watchdog@01c20ca0 { >> -- >> 1.9.1 >> -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index d3473f8..fa7ded5 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -146,6 +146,97 @@ clocks = <&osc16M>; clock-output-names = "osc16M-d512"; }; + + pll6: clk@01c20028 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-pll4-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6"; + }; + + pll6d2: pll6d2_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&pll6>; + clock-output-names = "pll6d2"; + }; + + ahb1: clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a83t-ahb1-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&pll6>; + clock-output-names = "ahb1"; + }; + + apb1: apb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a83t-apb1-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb1>; + clock-output-names = "apb1"; + }; + + apb2: clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&pll6>; + clock-output-names = "apb2"; + }; + + ahb2: clk@01c2005c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-h3-ahb2-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&ahb1>, <&pll6d2>; + clock-output-names = "ahb2"; + }; + + bus_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a83t-bus-gates-clk"; + reg = <0x01c20060 0x10>; + clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; + clock-names = "ahb1", "ahb2", "apb1", "apb2"; + clock-indices = <1>, <5>, <6>, + <8>, <9>, <10>, + <13>, <14>, <17>, + <19>, <20>, + <21>, <24>, + <26>, <27>, + <29>, <32>, + <36>, <37>, + <40>, <43>, + <44>, <52>, <53>, + <54>, <65>, + <69>, <76>, <77>, + <78>, <79>, <96>, + <97>, <98>, + <112>, <113>, + <114>, <115>, + <116>; + clock-output-names = "bus_mipidsi", "bus_ss", "bus_dma", + "bus_mmc0", "bus_mmc1", "bus_mmc2", + "bus_nand", "bus_sdram", "bus_emac", + "bus_hstimer", "bus_spi0", + "bus_spi1", "bus_usb_otg", + "bus_ehci0", "bus_ehci1", + "bus_ohci0", "bus_ve", + "bus_lcd0", "bus_lcd1", + "bus_csi", "bus_hdmi", + "bus_de", "bus_gpu", "bus_msgbox", + "bus_spinlock", "bus_spidf", + "bus_pio", "bus_i2s0", "bus_i2s1", + "bus_i2s2", "bus_tdm", "bus_i2c0", + "bus_i2c1", "bus_i2c2", + "bus_uart0", "bus_uart1", + "bus_uart2", "bus_uart3", + "bus_uart4"; + }; }; soc { @@ -160,7 +251,7 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; reg = <0x01c20800 0x400>; - clocks = <&osc24M>; + clocks = <&bus_gates 69>; gpio-controller; interrupt-controller; #interrupt-cells = <3>; @@ -189,12 +280,31 @@ }; }; + ahb_reset: reset@01c202c0 { + reg = <0x01c202c0 0xc>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + apb1_reset: reset@01c202d0 { + reg = <0x01c202d0 0x4>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + apb2_reset: reset@01c202d8 { + reg = <0x01c202d8 0x4>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + timer@01c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc24M>; + clocks = <&bus_gates 112>; + resets = <&apb2_reset 16>; }; watchdog@01c20ca0 {
This adds A83T system bus clocks, bus gates, and clock resets. Three ahb reset registers are combined into one node. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 114 +++++++++++++++++++++++++++++++++++++- 1 file changed, 112 insertions(+), 2 deletions(-)