Message ID | 1445455024-5519-1-git-send-email-nathan.sullivan@ni.com |
---|---|
State | Accepted, archived |
Delegated to: | David Miller |
Headers | show |
2015-10-21 12:17 GMT-07:00 Nathan Sullivan <nathan.sullivan@ni.com>: > Very rarely, the KSZ9031 will appear to complete autonegotiation, but > will drop all traffic afterwards. When this happens, the idle error > count will read 0xFF after autonegotiation completes. Reset the PHY > when in that state. > > Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> > --- > drivers/net/phy/micrel.c | 23 ++++++++++++++++++++++- > 1 file changed, 22 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c > index 499185e..cf6312f 100644 > --- a/drivers/net/phy/micrel.c > +++ b/drivers/net/phy/micrel.c > @@ -514,6 +514,27 @@ static int ksz8873mll_read_status(struct phy_device *phydev) > return 0; > } > > +static int ksz9031_read_status(struct phy_device *phydev) > +{ > + int err; > + int regval; > + > + err = genphy_read_status(phydev); > + if (err) > + return err; > + > + /* Make sure the PHY is not broken. Read idle error count, > + * and reset the PHY if it is maxed out. > + */ > + regval = phy_read(phydev, MII_STAT1000); > + if ((regval & 0xFF) == 0xFF) { Don't you also need to set phydev->state to PHY_READY here to force the state machine to restart? > + phy_init_hw(phydev); > + phydev->link = 0; > + } > + > + return 0; > +} > + > static int ksz8873mll_config_aneg(struct phy_device *phydev) > { > return 0; > @@ -772,7 +793,7 @@ static struct phy_driver ksphy_driver[] = { > .driver_data = &ksz9021_type, > .config_init = ksz9031_config_init, > .config_aneg = genphy_config_aneg, > - .read_status = genphy_read_status, > + .read_status = ksz9031_read_status, > .ack_interrupt = kszphy_ack_interrupt, > .config_intr = kszphy_config_intr, > .suspend = genphy_suspend, > -- > 1.7.10.4 >
On Wed, Oct 21, 2015 at 12:20:21PM -0700, Florian Fainelli wrote: > 2015-10-21 12:17 GMT-07:00 Nathan Sullivan <nathan.sullivan@ni.com>: > > Very rarely, the KSZ9031 will appear to complete autonegotiation, but > > will drop all traffic afterwards. When this happens, the idle error > > count will read 0xFF after autonegotiation completes. Reset the PHY > > when in that state. > > > > Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> > > --- > > drivers/net/phy/micrel.c | 23 ++++++++++++++++++++++- > > 1 file changed, 22 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c > > index 499185e..cf6312f 100644 > > --- a/drivers/net/phy/micrel.c > > +++ b/drivers/net/phy/micrel.c > > @@ -514,6 +514,27 @@ static int ksz8873mll_read_status(struct phy_device *phydev) > > return 0; > > } > > > > +static int ksz9031_read_status(struct phy_device *phydev) > > +{ > > + int err; > > + int regval; > > + > > + err = genphy_read_status(phydev); > > + if (err) > > + return err; > > + > > + /* Make sure the PHY is not broken. Read idle error count, > > + * and reset the PHY if it is maxed out. > > + */ > > + regval = phy_read(phydev, MII_STAT1000); > > + if ((regval & 0xFF) == 0xFF) { > > Don't you also need to set phydev->state to PHY_READY here to force > the state machine to restart? > I don't think so, we stay in the PHY_AN state since phy_init_hw will restart autonegotiation. Setting link=0 will go through PHY_NOLINK then back to PHY_AN, so we wait for autoneg to complete again. > > + phy_init_hw(phydev); > > + phydev->link = 0; > > + } > > + > > + return 0; > > +} > > + > > static int ksz8873mll_config_aneg(struct phy_device *phydev) > > { > > return 0; > > @@ -772,7 +793,7 @@ static struct phy_driver ksphy_driver[] = { > > .driver_data = &ksz9021_type, > > .config_init = ksz9031_config_init, > > .config_aneg = genphy_config_aneg, > > - .read_status = genphy_read_status, > > + .read_status = ksz9031_read_status, > > .ack_interrupt = kszphy_ack_interrupt, > > .config_intr = kszphy_config_intr, > > .suspend = genphy_suspend, > > -- > > 1.7.10.4 > > > > > > -- > Florian -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 21/10/15 12:42, Nathan Sullivan wrote: > On Wed, Oct 21, 2015 at 12:20:21PM -0700, Florian Fainelli wrote: >> 2015-10-21 12:17 GMT-07:00 Nathan Sullivan <nathan.sullivan@ni.com>: >>> Very rarely, the KSZ9031 will appear to complete autonegotiation, but >>> will drop all traffic afterwards. When this happens, the idle error >>> count will read 0xFF after autonegotiation completes. Reset the PHY >>> when in that state. >>> >>> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> >>> --- >>> drivers/net/phy/micrel.c | 23 ++++++++++++++++++++++- >>> 1 file changed, 22 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c >>> index 499185e..cf6312f 100644 >>> --- a/drivers/net/phy/micrel.c >>> +++ b/drivers/net/phy/micrel.c >>> @@ -514,6 +514,27 @@ static int ksz8873mll_read_status(struct phy_device *phydev) >>> return 0; >>> } >>> >>> +static int ksz9031_read_status(struct phy_device *phydev) >>> +{ >>> + int err; >>> + int regval; >>> + >>> + err = genphy_read_status(phydev); >>> + if (err) >>> + return err; >>> + >>> + /* Make sure the PHY is not broken. Read idle error count, >>> + * and reset the PHY if it is maxed out. >>> + */ >>> + regval = phy_read(phydev, MII_STAT1000); >>> + if ((regval & 0xFF) == 0xFF) { >> >> Don't you also need to set phydev->state to PHY_READY here to force >> the state machine to restart? >> > > I don't think so, we stay in the PHY_AN state since phy_init_hw will restart > autonegotiation. Setting link=0 will go through PHY_NOLINK then back to > PHY_AN, so we wait for autoneg to complete again. Good point, thanks for clarifiying that part.
From: Nathan Sullivan <nathan.sullivan@ni.com> Date: Wed, 21 Oct 2015 14:17:04 -0500 > Very rarely, the KSZ9031 will appear to complete autonegotiation, but > will drop all traffic afterwards. When this happens, the idle error > count will read 0xFF after autonegotiation completes. Reset the PHY > when in that state. > > Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Applied, thanks. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 499185e..cf6312f 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -514,6 +514,27 @@ static int ksz8873mll_read_status(struct phy_device *phydev) return 0; } +static int ksz9031_read_status(struct phy_device *phydev) +{ + int err; + int regval; + + err = genphy_read_status(phydev); + if (err) + return err; + + /* Make sure the PHY is not broken. Read idle error count, + * and reset the PHY if it is maxed out. + */ + regval = phy_read(phydev, MII_STAT1000); + if ((regval & 0xFF) == 0xFF) { + phy_init_hw(phydev); + phydev->link = 0; + } + + return 0; +} + static int ksz8873mll_config_aneg(struct phy_device *phydev) { return 0; @@ -772,7 +793,7 @@ static struct phy_driver ksphy_driver[] = { .driver_data = &ksz9021_type, .config_init = ksz9031_config_init, .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, + .read_status = ksz9031_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, .suspend = genphy_suspend,
Very rarely, the KSZ9031 will appear to complete autonegotiation, but will drop all traffic afterwards. When this happens, the idle error count will read 0xFF after autonegotiation completes. Reset the PHY when in that state. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> --- drivers/net/phy/micrel.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-)