From patchwork Fri Oct 27 09:36:14 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 1856114 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=C9nw4OXm; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=patchwork.ozlabs.org) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by legolas.ozlabs.org (Postfix) with ESMTP id 4SGyHt6XCMz23jV for ; Fri, 27 Oct 2023 20:37:30 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1345633AbjJ0Jha (ORCPT ); Fri, 27 Oct 2023 05:37:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49700 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1345612AbjJ0Jh3 (ORCPT ); Fri, 27 Oct 2023 05:37:29 -0400 Received: from mail-lj1-x229.google.com (mail-lj1-x229.google.com [IPv6:2a00:1450:4864:20::229]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4B270191 for ; Fri, 27 Oct 2023 02:37:25 -0700 (PDT) Received: by mail-lj1-x229.google.com with SMTP id 38308e7fff4ca-2c54c8934abso26847201fa.0 for ; Fri, 27 Oct 2023 02:37:25 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1698399443; x=1699004243; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=qf2NUAQLAKI7F389ZDRsoP6S/mfCGfk8XgxqPp6JMpE=; b=C9nw4OXmrJDWsKRke7YIiAjlPr+33ghiE0Zu+x15vg+oQZ42QCH/CYmGRsrOaVHIMk SG5Ol7gmUyHb03gBv9rLUt5NJMz/Fp3+rEAe2VnM3NZaJGZu7KIyM9k6CtbvSkMx6SQ5 cHsgoL3rDXCnSrAeuMlA1zN49Urz9NwLoz511FlnDqxKzssL15ObRtUg1daHtBKR9hSF sS9DeHgcg2BSmQG++XbUihxU+oUZDU79EsQpNwWUq+H23shKuiz+LsVkRd3Cu2uoW9nD xN+XJeGcnTwVP638m6xzkyF89OdDPC5hmL6b2IUp8a+s+fcWt0DuxYCSjjecYTvM+vZq P9QQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1698399443; x=1699004243; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=qf2NUAQLAKI7F389ZDRsoP6S/mfCGfk8XgxqPp6JMpE=; b=E2fYIcVi5+jVXA1j0beMdOMiB7R07zDrOMF9CdjkiSYDXayGTUmYNCIGY/NgFINWSG Xz5JtWHI3/DgJpTFTcEPThcqEnBQGO8c+Hn7RZ/AjMfWv8yw64Eagr/KnwRqPHRCUuOM ipYtZ4nqC2veu8yAfehax8EAMoAc4AQQZqdFs0BYW53rHGMU6edWwdZg0MZWFajzNEUt ldyGL64SDqFvrmBAglQNjUCl0cn7PRG2/9hM1cui/j/WyWzaCzSPf4xTFQxk9rDKe4vO C3H9R5a0C7aaexNsErNkhhhhZup5WfBVxdAegC8V0rnYGeTeR7MB9eeEsCHFll4d/Ddv hLAA== X-Gm-Message-State: AOJu0Yzg16gv3Y4aJ1yT/ODWADUREiOWO9kJmbdF7mnyNTqxNw0mOig7 Opv6qe86+zfE/erV/nWoDNzVwA== X-Google-Smtp-Source: AGHT+IG+4ju2+t0V03vBtXxTzz+jI0la47vGRo7IPpxWjep/Jp8pjV/VOfQkikTSprKVgvk9yNcY1g== X-Received: by 2002:a2e:3c12:0:b0:2c5:1bfc:e60b with SMTP id j18-20020a2e3c12000000b002c51bfce60bmr1642254lja.50.1698399443626; Fri, 27 Oct 2023 02:37:23 -0700 (PDT) Received: from krzk-bin.. ([78.10.206.168]) by smtp.gmail.com with ESMTPSA id s26-20020a2e151a000000b002c12c2094e4sm223341ljd.74.2023.10.27.02.37.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 27 Oct 2023 02:37:23 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Linus Walleij , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Srinivas Kandagatla , linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski Subject: [PATCH 1/2] dt-bindings: pinctrl: qcom,sm8650-lpass-lpi-pinctrl: add SM8650 LPASS Date: Fri, 27 Oct 2023 11:36:14 +0200 Message-Id: <20231027093615.140656-2-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20231027093615.140656-1-krzysztof.kozlowski@linaro.org> References: <20231027093615.140656-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Add bindings for the pin controller in Low Power Audio SubSystem (LPASS) of Qualcomm SM8650 SoC. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring --- .../qcom,sm8650-lpass-lpi-pinctrl.yaml | 148 ++++++++++++++++++ 1 file changed, 148 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..f5736ed140ee --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8650 SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski + - Srinivas Kandagatla + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8650 SoC. + +properties: + compatible: + const: qcom,sm8650-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + + gpio-controller: true + + "#gpio-cells": + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8650-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8650-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8650-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk, + i2s4_data, i2s4_ws, qca_swr_clk, qca_swr_data, slimbus_clk, + slimbus_data, swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, + wsa_swr_clk, wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-bus-hold: true + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,sm8650-lpass-lpi-pinctrl"; + reg = <0x06e80000 0x20000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; + }; From patchwork Fri Oct 27 09:36:15 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 1856115 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=dipLsXQi; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=patchwork.ozlabs.org) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by legolas.ozlabs.org (Postfix) with ESMTP id 4SGyHv51snz23jx for ; Fri, 27 Oct 2023 20:37:31 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1345632AbjJ0Jhb (ORCPT ); Fri, 27 Oct 2023 05:37:31 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49708 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1345631AbjJ0Jha (ORCPT ); Fri, 27 Oct 2023 05:37:30 -0400 Received: from mail-lj1-x22d.google.com (mail-lj1-x22d.google.com [IPv6:2a00:1450:4864:20::22d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 92440CE for ; Fri, 27 Oct 2023 02:37:26 -0700 (PDT) Received: by mail-lj1-x22d.google.com with SMTP id 38308e7fff4ca-2c5720a321aso24721321fa.1 for ; Fri, 27 Oct 2023 02:37:26 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1698399445; x=1699004245; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=qov0tCQqv9WLtyxzhfEqLbPjUez5vOCW+X4IeDwzJ+Q=; b=dipLsXQiW778VAOx7qXtWlA53rnFy+cjomSPU3fpAVxgnJ3T5BArbAf8YebExhQ0Kk WivkcD2TQgYquWmM9vBbdHiAguMay4ZzLQK0BAuw02t3kW2DSHmNP6uM8C55+vFzfbzB sBV5VotxdoHhVp6s0W4jy7koou6ZO+yylNAa+X2Mx/m4/5I5Wb4Vx4aodkBiOOY5a31J CsivYV+3GfPrnSvOJ7YczJUKFP3GtYiMIgeIZoaAmD7H7Ba/2ASNS1BxeP9xYEeI6iMr Rwa6oAp3/a0GdexqhUUx3ZyYKAkonGXHmh9isxMNYsEmntb+2Pb+IaaZnOxckGiu7Mcn yH0g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1698399445; x=1699004245; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=qov0tCQqv9WLtyxzhfEqLbPjUez5vOCW+X4IeDwzJ+Q=; b=gcuW/MNiG+3U3gwWomr9PUXaExfE/UHt7HmRZH4+PzLbBwOFgUCbPl2dDd9UtvrfMi ItMZXlaeJ+XBOJELhiMjzIWJRIkYkBDolNy0Wz/ejHq37DzkY5T1uxOucWIvLwFCwmbH R3NpXQ59cqZuMOGeLqhWbaD8uAazbsMGfoakkXgqLUjWyFdfjx5EhAQUIvB3ut0GLezt saXEc37N9yNSQ1Jukh8YhvJCNDuFteItaSsao8JgTZPzk2HkzvLR48nQcCJpGTBu5Vuo T2iy5CxPhphQpYcDUHKGC/+xAjOYXkxpQq/wyyBx4xsAcqOY5cgqObnGZzQlnLuWiUwv dZ6A== X-Gm-Message-State: AOJu0YyTL74KwHwssrS+iHFIvfq4z7iggfNMYm09WefpiE6Sn3s4oQ7b tbOwWw0QCu3AYLJt1zTA6n+RpA== X-Google-Smtp-Source: AGHT+IE1TDr8ZeuiZBOVcJAtLiHzTiITSDEkqWEhU9cPtgQXP+XV9+6ZJq/AzthVGdRQZzWOpDk1wA== X-Received: by 2002:a2e:9b0b:0:b0:2b9:36d5:729c with SMTP id u11-20020a2e9b0b000000b002b936d5729cmr1650591lji.47.1698399444820; Fri, 27 Oct 2023 02:37:24 -0700 (PDT) Received: from krzk-bin.. ([78.10.206.168]) by smtp.gmail.com with ESMTPSA id s26-20020a2e151a000000b002c12c2094e4sm223341ljd.74.2023.10.27.02.37.23 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 27 Oct 2023 02:37:24 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Linus Walleij , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Srinivas Kandagatla , linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski Subject: [PATCH 2/2] pinctrl: qcom: sm8650-lpass-lpi: add SM8650 LPASS Date: Fri, 27 Oct 2023 11:36:15 +0200 Message-Id: <20231027093615.140656-3-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20231027093615.140656-1-krzysztof.kozlowski@linaro.org> References: <20231027093615.140656-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Add driver for the pin controller in Low Power Audio SubSystem (LPASS) of Qualcomm SM8650 SoC. Notable differences against SM8550 LPASS pin controller: 1. Additional address space for slew rate thus driver uses LPI_FLAG_SLEW_RATE_SAME_REG and sets slew rate via different register. 2. Two new pin mux functions: qca_swr_clk and qca_swr_data Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio --- drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + .../pinctrl/qcom/pinctrl-sm8650-lpass-lpi.c | 255 ++++++++++++++++++ 3 files changed, 266 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8650-lpass-lpi.c diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index f84c0d3b7951..e0f2829c15d6 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -124,4 +124,14 @@ config PINCTRL_SM8550_LPASS_LPI (Low Power Island) found on the Qualcomm Technologies Inc SM8550 platform. +config PINCTRL_SM8650_LPASS_LPI + tristate "Qualcomm Technologies Inc SM8550 LPASS LPI pin controller driver" + depends on ARM64 || COMPILE_TEST + depends on PINCTRL_LPASS_LPI + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI + (Low Power Island) found on the Qualcomm Technologies Inc SM8650 + platform. + endif diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 5910e08c84ce..f7b410e59bf1 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -58,5 +58,6 @@ obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o obj-$(CONFIG_PINCTRL_SM8450_LPASS_LPI) += pinctrl-sm8450-lpass-lpi.o obj-$(CONFIG_PINCTRL_SM8550) += pinctrl-sm8550.o obj-$(CONFIG_PINCTRL_SM8550_LPASS_LPI) += pinctrl-sm8550-lpass-lpi.o +obj-$(CONFIG_PINCTRL_SM8650_LPASS_LPI) += pinctrl-sm8650-lpass-lpi.o obj-$(CONFIG_PINCTRL_SC8280XP_LPASS_LPI) += pinctrl-sc8280xp-lpass-lpi.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o diff --git a/drivers/pinctrl/qcom/pinctrl-sm8650-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8650-lpass-lpi.c new file mode 100644 index 000000000000..6e4be91ff085 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sm8650-lpass-lpi.c @@ -0,0 +1,255 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022-2023 Linaro Ltd. + */ + +#include +#include +#include + +#include "pinctrl-lpass-lpi.h" + +enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_dmic4_clk, + LPI_MUX_dmic4_data, + LPI_MUX_i2s0_clk, + LPI_MUX_i2s0_data, + LPI_MUX_i2s0_ws, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_i2s3_clk, + LPI_MUX_i2s3_data, + LPI_MUX_i2s3_ws, + LPI_MUX_i2s4_clk, + LPI_MUX_i2s4_data, + LPI_MUX_i2s4_ws, + LPI_MUX_qca_swr_clk, + LPI_MUX_qca_swr_data, + LPI_MUX_slimbus_clk, + LPI_MUX_slimbus_data, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_wsa2_swr_clk, + LPI_MUX_wsa2_swr_data, + LPI_MUX_ext_mclk1_a, + LPI_MUX_ext_mclk1_b, + LPI_MUX_ext_mclk1_c, + LPI_MUX_ext_mclk1_d, + LPI_MUX_ext_mclk1_e, + LPI_MUX_gpio, + LPI_MUX__, +}; + +static int gpio0_pins[] = { 0 }; +static int gpio1_pins[] = { 1 }; +static int gpio2_pins[] = { 2 }; +static int gpio3_pins[] = { 3 }; +static int gpio4_pins[] = { 4 }; +static int gpio5_pins[] = { 5 }; +static int gpio6_pins[] = { 6 }; +static int gpio7_pins[] = { 7 }; +static int gpio8_pins[] = { 8 }; +static int gpio9_pins[] = { 9 }; +static int gpio10_pins[] = { 10 }; +static int gpio11_pins[] = { 11 }; +static int gpio12_pins[] = { 12 }; +static int gpio13_pins[] = { 13 }; +static int gpio14_pins[] = { 14 }; +static int gpio15_pins[] = { 15 }; +static int gpio16_pins[] = { 16 }; +static int gpio17_pins[] = { 17 }; +static int gpio18_pins[] = { 18 }; +static int gpio19_pins[] = { 19 }; +static int gpio20_pins[] = { 20 }; +static int gpio21_pins[] = { 21 }; +static int gpio22_pins[] = { 22 }; + +static const struct pinctrl_pin_desc sm8650_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), + PINCTRL_PIN(14, "gpio14"), + PINCTRL_PIN(15, "gpio15"), + PINCTRL_PIN(16, "gpio16"), + PINCTRL_PIN(17, "gpio17"), + PINCTRL_PIN(18, "gpio18"), + PINCTRL_PIN(19, "gpio19"), + PINCTRL_PIN(20, "gpio20"), + PINCTRL_PIN(21, "gpio21"), + PINCTRL_PIN(22, "gpio22"), +}; + +static const char * const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", +}; + +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const dmic4_clk_groups[] = { "gpio17" }; +static const char * const dmic4_data_groups[] = { "gpio18" }; +static const char * const i2s0_clk_groups[] = { "gpio0" }; +static const char * const i2s0_ws_groups[] = { "gpio1" }; +static const char * const i2s0_data_groups[] = { "gpio2", "gpio3", "gpio4", "gpio5" }; +static const char * const i2s1_clk_groups[] = { "gpio6" }; +static const char * const i2s1_ws_groups[] = { "gpio7" }; +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; +static const char * const i2s2_clk_groups[] = { "gpio10" }; +static const char * const i2s2_ws_groups[] = { "gpio11" }; +static const char * const i2s2_data_groups[] = { "gpio15", "gpio16" }; +static const char * const i2s3_clk_groups[] = { "gpio12" }; +static const char * const i2s3_ws_groups[] = { "gpio13" }; +static const char * const i2s3_data_groups[] = { "gpio17", "gpio18" }; +static const char * const i2s4_clk_groups[] = { "gpio19"}; +static const char * const i2s4_ws_groups[] = { "gpio20"}; +static const char * const i2s4_data_groups[] = { "gpio21", "gpio22"}; +static const char * const qca_swr_clk_groups[] = { "gpio19" }; +static const char * const qca_swr_data_groups[] = { "gpio20" }; +static const char * const slimbus_clk_groups[] = { "gpio19"}; +static const char * const slimbus_data_groups[] = { "gpio20"}; +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio14" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5", "gpio15" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_data_groups[] = { "gpio11" }; +static const char * const wsa2_swr_clk_groups[] = { "gpio15" }; +static const char * const wsa2_swr_data_groups[] = { "gpio16" }; +static const char * const ext_mclk1_c_groups[] = { "gpio5" }; +static const char * const ext_mclk1_b_groups[] = { "gpio9" }; +static const char * const ext_mclk1_a_groups[] = { "gpio13" }; +static const char * const ext_mclk1_d_groups[] = { "gpio14" }; +static const char * const ext_mclk1_e_groups[] = { "gpio22" }; + +static const struct lpi_pingroup sm8650_groups[] = { + LPI_PINGROUP(0, 11, swr_tx_clk, i2s0_clk, _, _), + LPI_PINGROUP(1, 11, swr_tx_data, i2s0_ws, _, _), + LPI_PINGROUP(2, 11, swr_tx_data, i2s0_data, _, _), + LPI_PINGROUP(3, 11, swr_rx_clk, i2s0_data, _, _), + LPI_PINGROUP(4, 11, swr_rx_data, i2s0_data, _, _), + LPI_PINGROUP(5, 11, swr_rx_data, ext_mclk1_c, i2s0_data, _), + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, ext_mclk1_b, _), + LPI_PINGROUP(10, 11, i2s2_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 11, i2s2_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s3_clk, _, _), + LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s3_ws, ext_mclk1_a, _), + LPI_PINGROUP(14, 11, swr_tx_data, ext_mclk1_d, _, _), + LPI_PINGROUP(15, 11, i2s2_data, wsa2_swr_clk, _, _), + LPI_PINGROUP(16, 11, i2s2_data, wsa2_swr_data, _, _), + LPI_PINGROUP(17, LPI_NO_SLEW, dmic4_clk, i2s3_data, _, _), + LPI_PINGROUP(18, LPI_NO_SLEW, dmic4_data, i2s3_data, _, _), + LPI_PINGROUP(19, 11, i2s4_clk, slimbus_clk, qca_swr_clk, _), + LPI_PINGROUP(20, 11, i2s4_ws, slimbus_data, qca_swr_data, _), + LPI_PINGROUP(21, LPI_NO_SLEW, i2s4_data, _, _, _), + LPI_PINGROUP(22, LPI_NO_SLEW, i2s4_data, ext_mclk1_e, _, _), +}; + +static const struct lpi_function sm8650_functions[] = { + LPI_FUNCTION(gpio), + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(dmic4_clk), + LPI_FUNCTION(dmic4_data), + LPI_FUNCTION(i2s0_clk), + LPI_FUNCTION(i2s0_data), + LPI_FUNCTION(i2s0_ws), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(i2s3_clk), + LPI_FUNCTION(i2s3_data), + LPI_FUNCTION(i2s3_ws), + LPI_FUNCTION(i2s4_clk), + LPI_FUNCTION(i2s4_data), + LPI_FUNCTION(i2s4_ws), + LPI_FUNCTION(qca_swr_clk), + LPI_FUNCTION(qca_swr_data), + LPI_FUNCTION(slimbus_clk), + LPI_FUNCTION(slimbus_data), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), + LPI_FUNCTION(wsa2_swr_clk), + LPI_FUNCTION(wsa2_swr_data), + LPI_FUNCTION(ext_mclk1_a), + LPI_FUNCTION(ext_mclk1_b), + LPI_FUNCTION(ext_mclk1_c), + LPI_FUNCTION(ext_mclk1_d), + LPI_FUNCTION(ext_mclk1_e), +}; + +static const struct lpi_pinctrl_variant_data sm8650_lpi_data = { + .pins = sm8650_lpi_pins, + .npins = ARRAY_SIZE(sm8650_lpi_pins), + .groups = sm8650_groups, + .ngroups = ARRAY_SIZE(sm8650_groups), + .functions = sm8650_functions, + .nfunctions = ARRAY_SIZE(sm8650_functions), + .flags = LPI_FLAG_SLEW_RATE_SAME_REG, +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,sm8650-lpass-lpi-pinctrl", + .data = &sm8650_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sm8650-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove_new = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("Qualcomm SM8650 LPI GPIO pin control driver"); +MODULE_LICENSE("GPL");