From patchwork Tue Oct 4 16:49:11 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tim Harvey X-Patchwork-Id: 1686040 X-Patchwork-Delegate: rfried.dev@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (P-384)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4MhkGY1sjwz1ypH for ; Wed, 5 Oct 2022 03:50:28 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 0A94784E1D; Tue, 4 Oct 2022 18:49:46 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id 98BAC84E00; Tue, 4 Oct 2022 18:49:33 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from finn.localdomain (finn.gateworks.com [108.161.129.64]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 47B1984E00 for ; Tue, 4 Oct 2022 18:49:24 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=tharvey@gateworks.com Received: from 068-189-091-139.biz.spectrum.com ([68.189.91.139] helo=tharvey.pdc.gateworks.com) by finn.localdomain with esmtp (Exim 4.93) (envelope-from ) id 1ofl6f-00HAgS-6L; Tue, 04 Oct 2022 16:49:21 +0000 From: Tim Harvey To: u-boot@lists.denx.de, Joe Hershberger , Ramon Fried , Vladimir Oltean , Stefano Babic , Fabio Estevam , "NXP i . MX U-Boot Team" , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Tim Harvey , Fabio Estevam Subject: [PATCH v5 1/8] net: mdio-uclass: scan for dm mdio children on post-bind Date: Tue, 4 Oct 2022 09:49:11 -0700 Message-Id: <20221004164918.2251714-2-tharvey@gateworks.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221004164918.2251714-1-tharvey@gateworks.com> References: <20221004164918.2251714-1-tharvey@gateworks.com> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.6 at phobos.denx.de X-Virus-Status: Clean If a DM_MDIO driver is used we need to scan the subnodes as well. Signed-off-by: Tim Harvey Signed-off-by: Vladimir Oltean Reviewed-by: Ramon Fried Reviewed-by: Fabio Estevam --- v5: - added Fabio's rb tag v4: - no changes v3: - no changes v2: - added Ramon's rb tag --- net/mdio-uclass.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mdio-uclass.c b/net/mdio-uclass.c index 4401492ca015..d80037d0ac71 100644 --- a/net/mdio-uclass.c +++ b/net/mdio-uclass.c @@ -49,7 +49,11 @@ static int dm_mdio_post_bind(struct udevice *dev) return -EINVAL; } +#if CONFIG_IS_ENABLED(OF_REAL) + return dm_scan_fdt_dev(dev); +#else return 0; +#endif } int dm_mdio_read(struct udevice *mdio_dev, int addr, int devad, int reg) From patchwork Tue Oct 4 16:49:12 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tim Harvey X-Patchwork-Id: 1686036 X-Patchwork-Delegate: rfried.dev@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (P-384)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4MhkFc3JtVz1yqn for ; Wed, 5 Oct 2022 03:49:40 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 4CD0B84E0E; Tue, 4 Oct 2022 18:49:32 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id 46DFA84AD4; Tue, 4 Oct 2022 18:49:27 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from finn.localdomain (finn.gateworks.com [108.161.129.64]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id C8A9484D45 for ; Tue, 4 Oct 2022 18:49:24 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=tharvey@gateworks.com Received: from 068-189-091-139.biz.spectrum.com ([68.189.91.139] helo=tharvey.pdc.gateworks.com) by finn.localdomain with esmtp (Exim 4.93) (envelope-from ) id 1ofl6f-00HAgS-Tl; Tue, 04 Oct 2022 16:49:22 +0000 From: Tim Harvey To: u-boot@lists.denx.de, Joe Hershberger , Ramon Fried , Vladimir Oltean , Stefano Babic , Fabio Estevam , "NXP i . MX U-Boot Team" , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Tim Harvey , Fabio Estevam Subject: [PATCH v5 2/8] net: dsa: move cpu port probe to dsa_post_probe Date: Tue, 4 Oct 2022 09:49:12 -0700 Message-Id: <20221004164918.2251714-3-tharvey@gateworks.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221004164918.2251714-1-tharvey@gateworks.com> References: <20221004164918.2251714-1-tharvey@gateworks.com> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.6 at phobos.denx.de X-Virus-Status: Clean In order to ensure that a DSA driver probe gets called before dsa_ops->port_probe move the port_probe of the cpu_port to a post-probe function. Signed-off-by: Tim Harvey Reviewed-by: Ramon Fried Reviewed-by: Vladimir Oltean Reviewed-by: Fabio Estevam --- v5: - added Fabio's rb tag v4: - no changes v3: - added Vladimir's rb tag v2: - added Ramon's rb tag --- net/dsa-uclass.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/net/dsa-uclass.c b/net/dsa-uclass.c index 5b7046432ff3..a37e76e25a8f 100644 --- a/net/dsa-uclass.c +++ b/net/dsa-uclass.c @@ -466,7 +466,6 @@ static int dsa_pre_probe(struct udevice *dev) { struct dsa_pdata *pdata = dev_get_uclass_plat(dev); struct dsa_priv *priv = dev_get_uclass_priv(dev); - struct dsa_ops *ops = dsa_get_ops(dev); int err; priv->num_ports = pdata->num_ports; @@ -482,6 +481,15 @@ static int dsa_pre_probe(struct udevice *dev) if (err) return err; + return 0; +} + +static int dsa_post_probe(struct udevice *dev) +{ + struct dsa_priv *priv = dev_get_uclass_priv(dev); + struct dsa_ops *ops = dsa_get_ops(dev); + int err; + /* Simulate a probing event for the CPU port */ if (ops->port_probe) { err = ops->port_probe(dev, priv->cpu_port, @@ -491,13 +499,14 @@ static int dsa_pre_probe(struct udevice *dev) } return 0; -} +}; UCLASS_DRIVER(dsa) = { .id = UCLASS_DSA, .name = "dsa", .post_bind = dsa_post_bind, .pre_probe = dsa_pre_probe, + .post_probe = dsa_post_probe, .per_device_auto = sizeof(struct dsa_priv), .per_device_plat_auto = sizeof(struct dsa_pdata), .per_child_plat_auto = sizeof(struct dsa_port_pdata), From patchwork Tue Oct 4 16:49:13 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tim Harvey X-Patchwork-Id: 1686038 X-Patchwork-Delegate: rfried.dev@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (P-384)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4MhkG21D9Zz1yqn for ; Wed, 5 Oct 2022 03:50:02 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 3C93284DD9; Tue, 4 Oct 2022 18:49:39 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id 9AF6384DFD; Tue, 4 Oct 2022 18:49:29 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from finn.localdomain (finn.gateworks.com [108.161.129.64]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id E3F7884DAF for ; Tue, 4 Oct 2022 18:49:25 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=tharvey@gateworks.com Received: from 068-189-091-139.biz.spectrum.com ([68.189.91.139] helo=tharvey.pdc.gateworks.com) by finn.localdomain with esmtp (Exim 4.93) (envelope-from ) id 1ofl6g-00HAgS-Ky; Tue, 04 Oct 2022 16:49:22 +0000 From: Tim Harvey To: u-boot@lists.denx.de, Joe Hershberger , Ramon Fried , Vladimir Oltean , Stefano Babic , Fabio Estevam , "NXP i . MX U-Boot Team" , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Tim Harvey , Fabio Estevam Subject: [PATCH v5 3/8] net: dsa: ensure dsa driver has proper ops Date: Tue, 4 Oct 2022 09:49:13 -0700 Message-Id: <20221004164918.2251714-4-tharvey@gateworks.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221004164918.2251714-1-tharvey@gateworks.com> References: <20221004164918.2251714-1-tharvey@gateworks.com> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.6 at phobos.denx.de X-Virus-Status: Clean Add a function to sanity check a dsa driver having proper ops. Suggested-by: Vladimir Oltean Signed-off-by: Tim Harvey Reviewed-by: Vladimir Oltean Reviewed-by: Fabio Estevam --- v5: - added Fabio's rb tag v4: - no changes v3: - added Vladimir's rb tag v2: new patch --- net/dsa-uclass.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/net/dsa-uclass.c b/net/dsa-uclass.c index a37e76e25a8f..e74dc178ff69 100644 --- a/net/dsa-uclass.c +++ b/net/dsa-uclass.c @@ -342,6 +342,19 @@ U_BOOT_DRIVER(dsa_port) = { .plat_auto = sizeof(struct eth_pdata), }; +static int dsa_sanitize_ops(struct udevice *dev) +{ + struct dsa_ops *ops = dsa_get_ops(dev); + + if ((!ops->xmit || !ops->rcv) && + (!ops->port_enable && !ops->port_disable)) { + dev_err(dev, "Packets cannot be steered to ports\n"); + return -EINVAL; + } + + return 0; +} + /* * This function mostly deals with pulling information out of the device tree * into the pdata structure. @@ -358,6 +371,10 @@ static int dsa_post_bind(struct udevice *dev) if (!ofnode_valid(node)) return -ENODEV; + err = dsa_sanitize_ops(dev); + if (err) + return err; + pdata->master_node = ofnode_null(); node = ofnode_find_subnode(node, "ports"); From patchwork Tue Oct 4 16:49:14 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tim Harvey X-Patchwork-Id: 1686037 X-Patchwork-Delegate: rfried.dev@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (P-384)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4MhkFq01Sjz1yqn for ; Wed, 5 Oct 2022 03:49:50 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 37F3D84D5A; Tue, 4 Oct 2022 18:49:35 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id 12DFE84E02; Tue, 4 Oct 2022 18:49:30 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from finn.localdomain (finn.gateworks.com [108.161.129.64]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id DB3B084D63 for ; Tue, 4 Oct 2022 18:49:25 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=tharvey@gateworks.com Received: from 068-189-091-139.biz.spectrum.com ([68.189.91.139] helo=tharvey.pdc.gateworks.com) by finn.localdomain with esmtp (Exim 4.93) (envelope-from ) id 1ofl6h-00HAgS-BT; Tue, 04 Oct 2022 16:49:23 +0000 From: Tim Harvey To: u-boot@lists.denx.de, Joe Hershberger , Ramon Fried , Vladimir Oltean , Stefano Babic , Fabio Estevam , "NXP i . MX U-Boot Team" , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Tim Harvey , Fabio Estevam Subject: [PATCH v5 4/8] net: dsa: allow rcv() and xmit() to be optional Date: Tue, 4 Oct 2022 09:49:14 -0700 Message-Id: <20221004164918.2251714-5-tharvey@gateworks.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221004164918.2251714-1-tharvey@gateworks.com> References: <20221004164918.2251714-1-tharvey@gateworks.com> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.6 at phobos.denx.de X-Virus-Status: Clean Allow rcv() and xmit() dsa driver ops to be optional in case a driver does not care to mangle a packet as in U-Boot only one network port is enabled at a time and thus no packet mangling is necessary. Suggested-by: Vladimir Oltean Signed-off-by: Tim Harvey Reviewed-by: Vladimir Oltean Reviewed-by: Fabio Estevam --- v5: - added Fabio's rb tag v4: - no changes v3: - added Vladimir's rb tag v2: new patch --- net/dsa-uclass.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/net/dsa-uclass.c b/net/dsa-uclass.c index e74dc178ff69..37a84b88cd10 100644 --- a/net/dsa-uclass.c +++ b/net/dsa-uclass.c @@ -131,16 +131,14 @@ static void dsa_port_stop(struct udevice *pdev) * We copy the frame to a stack buffer where we have reserved headroom and * tailroom space. Headroom and tailroom are set to 0. */ -static int dsa_port_send(struct udevice *pdev, void *packet, int length) +static int dsa_port_mangle_packet(struct udevice *pdev, void *packet, int length) { + struct dsa_port_pdata *port_pdata = dev_get_parent_plat(pdev); struct udevice *dev = dev_get_parent(pdev); struct dsa_priv *priv = dev_get_uclass_priv(dev); int head = priv->headroom, tail = priv->tailroom; - struct udevice *master = dsa_get_master(dev); struct dsa_ops *ops = dsa_get_ops(dev); uchar dsa_packet_tmp[PKTSIZE_ALIGN]; - struct dsa_port_pdata *port_pdata; - int err; if (length + head + tail > PKTSIZE_ALIGN) return -EINVAL; @@ -152,10 +150,21 @@ static int dsa_port_send(struct udevice *pdev, void *packet, int length) /* copy back to preserve original buffer alignment */ memcpy(packet, dsa_packet_tmp, length); - port_pdata = dev_get_parent_plat(pdev); - err = ops->xmit(dev, port_pdata->index, packet, length); - if (err) - return err; + return ops->xmit(dev, port_pdata->index, packet, length); +} + +static int dsa_port_send(struct udevice *pdev, void *packet, int length) +{ + struct udevice *dev = dev_get_parent(pdev); + struct udevice *master = dsa_get_master(dev); + struct dsa_ops *ops = dsa_get_ops(dev); + int err; + + if (ops->xmit) { + err = dsa_port_mangle_packet(pdev, packet, length); + if (err) + return err; + } return eth_get_ops(master)->send(master, packet, length); } @@ -172,7 +181,7 @@ static int dsa_port_recv(struct udevice *pdev, int flags, uchar **packetp) int length, port_index, err; length = eth_get_ops(master)->recv(master, flags, packetp); - if (length <= 0) + if (length <= 0 || !ops->rcv) return length; /* From patchwork Tue Oct 4 16:49:15 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tim Harvey X-Patchwork-Id: 1686043 X-Patchwork-Delegate: rfried.dev@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (P-384)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4MhkH74Kw7z1ypH for ; Wed, 5 Oct 2022 03:50:58 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 1DCD784E26; Tue, 4 Oct 2022 18:49:55 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id CC21B84D63; Tue, 4 Oct 2022 18:49:38 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from finn.localdomain (finn.gateworks.com [108.161.129.64]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 5C27084E0D for ; Tue, 4 Oct 2022 18:49:26 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=tharvey@gateworks.com Received: from 068-189-091-139.biz.spectrum.com ([68.189.91.139] helo=tharvey.pdc.gateworks.com) by finn.localdomain with esmtp (Exim 4.93) (envelope-from ) id 1ofl6i-00HAgS-2X; Tue, 04 Oct 2022 16:49:24 +0000 From: Tim Harvey To: u-boot@lists.denx.de, Joe Hershberger , Ramon Fried , Vladimir Oltean , Stefano Babic , Fabio Estevam , "NXP i . MX U-Boot Team" , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Tim Harvey , Fabio Estevam Subject: [PATCH v5 5/8] net: ksz9477: remove unnecessary xmit and recv functions Date: Tue, 4 Oct 2022 09:49:15 -0700 Message-Id: <20221004164918.2251714-6-tharvey@gateworks.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221004164918.2251714-1-tharvey@gateworks.com> References: <20221004164918.2251714-1-tharvey@gateworks.com> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.6 at phobos.denx.de X-Virus-Status: Clean Remove the unnecessary xmit and recv functions. Signed-off-by: Tim Harvey Reviewed-by: Vladimir Oltean Reviewed-by: Fabio Estevam --- v5: - added Fabio's rb tag v4: - no changes v3: - added Vladimir's rb tag v2: new patch --- drivers/net/ksz9477.c | 23 ----------------------- 1 file changed, 23 deletions(-) diff --git a/drivers/net/ksz9477.c b/drivers/net/ksz9477.c index ed8f1895cb12..fb5c76c600be 100644 --- a/drivers/net/ksz9477.c +++ b/drivers/net/ksz9477.c @@ -62,7 +62,6 @@ struct ksz_dsa_priv { struct udevice *dev; - int active_port; }; static inline int ksz_read8(struct udevice *dev, u32 reg, u8 *val) @@ -382,9 +381,6 @@ static int ksz_port_enable(struct udevice *dev, int port, struct phy_device *phy data8 |= SW_START; ksz_write8(priv->dev, REG_SW_OPERATION, data8); - /* keep track of current enabled non-cpu port */ - priv->active_port = port; - return 0; } @@ -413,28 +409,9 @@ static void ksz_port_disable(struct udevice *dev, int port, struct phy_device *p */ } -static int ksz_xmit(struct udevice *dev, int port, void *packet, int length) -{ - dev_dbg(dev, "%s P%d %d\n", __func__, port + 1, length); - - return 0; -} - -static int ksz_recv(struct udevice *dev, int *port, void *packet, int length) -{ - struct ksz_dsa_priv *priv = dev_get_priv(dev); - - dev_dbg(dev, "%s P%d %d\n", __func__, priv->active_port + 1, length); - *port = priv->active_port; - - return 0; -}; - static const struct dsa_ops ksz_dsa_ops = { .port_enable = ksz_port_enable, .port_disable = ksz_port_disable, - .xmit = ksz_xmit, - .rcv = ksz_recv, }; static int ksz_probe_mdio(struct udevice *dev) From patchwork Tue Oct 4 16:49:16 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tim Harvey X-Patchwork-Id: 1686039 X-Patchwork-Delegate: rfried.dev@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (P-384)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4MhkGF2WZTz1ypH for ; Wed, 5 Oct 2022 03:50:13 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 21F5284E17; Tue, 4 Oct 2022 18:49:42 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id 9DCD784E05; Tue, 4 Oct 2022 18:49:30 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from finn.localdomain (finn.gateworks.com [108.161.129.64]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 4166284BD6 for ; Tue, 4 Oct 2022 18:49:27 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=tharvey@gateworks.com Received: from 068-189-091-139.biz.spectrum.com ([68.189.91.139] helo=tharvey.pdc.gateworks.com) by finn.localdomain with esmtp (Exim 4.93) (envelope-from ) id 1ofl6i-00HAgS-QN; Tue, 04 Oct 2022 16:49:24 +0000 From: Tim Harvey To: u-boot@lists.denx.de, Joe Hershberger , Ramon Fried , Vladimir Oltean , Stefano Babic , Fabio Estevam , "NXP i . MX U-Boot Team" , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Tim Harvey , Fabio Estevam Subject: [PATCH v5 6/8] net: fec: add support for DM_MDIO Date: Tue, 4 Oct 2022 09:49:16 -0700 Message-Id: <20221004164918.2251714-7-tharvey@gateworks.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221004164918.2251714-1-tharvey@gateworks.com> References: <20221004164918.2251714-1-tharvey@gateworks.com> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.6 at phobos.denx.de X-Virus-Status: Clean Add support for DM_MDIO by registering a UCLASS_MDIO driver and attempting to use it. This is necessary if wanting to use a DSA driver for example hanging off of the FEC MAC. Care is taken to fallback to non DM_MDIO mii bus as several boards define DM_MDIO without having the proper device-tree configuration necessary such as an mdio subnode, a phy-mode prop, and either a valid phy-handle prop or fixed-phy subnode which will cause dm_eth_phy_connect() to fail. Signed-off-by: Tim Harvey Reviewed-by: Fabio Estevam --- v5: - added Fabio's rb tag v4: - no changes v3: - no changes v2: - fix fallback mechanism for legacy dt's that do not have phy-handle and mdio subnode --- drivers/net/fec_mxc.c | 90 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 88 insertions(+), 2 deletions(-) diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index bbc4434ddb9e..7057472710fa 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -30,6 +30,8 @@ #include #include #include +#include +#include #include "fec_mxc.h" #include @@ -1026,6 +1028,81 @@ struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id) return bus; } +#ifdef CONFIG_DM_MDIO +struct dm_fec_mdio_priv { + struct ethernet_regs *regs; +}; + +static int dm_fec_mdio_read(struct udevice *dev, int addr, int devad, int reg) +{ + struct dm_fec_mdio_priv *priv = dev_get_priv(dev); + + return fec_mdio_read(priv->regs, addr, reg); +} + +static int dm_fec_mdio_write(struct udevice *dev, int addr, int devad, int reg, u16 data) +{ + struct dm_fec_mdio_priv *priv = dev_get_priv(dev); + + return fec_mdio_write(priv->regs, addr, reg, data); +} + +static const struct mdio_ops dm_fec_mdio_ops = { + .read = dm_fec_mdio_read, + .write = dm_fec_mdio_write, +}; + +static int dm_fec_mdio_probe(struct udevice *dev) +{ + struct dm_fec_mdio_priv *priv = dev_get_priv(dev); + + priv->regs = (struct ethernet_regs *)ofnode_get_addr(dev_ofnode(dev->parent)); + + return 0; +} + +U_BOOT_DRIVER(fec_mdio) = { + .name = "fec_mdio", + .id = UCLASS_MDIO, + .probe = dm_fec_mdio_probe, + .ops = &dm_fec_mdio_ops, + .priv_auto = sizeof(struct dm_fec_mdio_priv), +}; + +static int dm_fec_bind_mdio(struct udevice *dev) +{ + struct udevice *mdiodev; + const char *name; + ofnode mdio; + int ret = -ENODEV; + + /* for a UCLASS_MDIO driver we need to bind and probe manually + * for an internal MDIO bus that has no dt compatible of its own + */ + ofnode_for_each_subnode(mdio, dev_ofnode(dev)) { + name = ofnode_get_name(mdio); + + if (strcmp(name, "mdio")) + continue; + + ret = device_bind_driver_to_node(dev, "fec_mdio", + name, mdio, &mdiodev); + if (ret) { + printf("%s bind %s failed: %d\n", __func__, name, ret); + break; + } + + /* need to probe it as there is no compatible to do so */ + ret = uclass_get_device_by_ofnode(UCLASS_MDIO, mdio, &mdiodev); + if (!ret) + return 0; + printf("%s probe %s failed: %d\n", __func__, name, ret); + } + + return ret; +} +#endif + static int fecmxc_read_rom_hwaddr(struct udevice *dev) { struct fec_priv *priv = dev_get_priv(dev); @@ -1089,7 +1166,7 @@ static int device_get_phy_addr(struct fec_priv *priv, struct udevice *dev) static int fec_phy_init(struct fec_priv *priv, struct udevice *dev) { - struct phy_device *phydev; + struct phy_device *phydev = NULL; int addr; addr = device_get_phy_addr(priv, dev); @@ -1097,7 +1174,10 @@ static int fec_phy_init(struct fec_priv *priv, struct udevice *dev) addr = CONFIG_FEC_MXC_PHYADDR; #endif - phydev = phy_connect(priv->bus, addr, dev, priv->interface); + if (IS_ENABLED(CONFIG_DM_MDIO)) + phydev = dm_eth_phy_connect(dev); + if (!phydev) + phydev = phy_connect(priv->bus, addr, dev, priv->interface); if (!phydev) return -ENODEV; @@ -1228,6 +1308,12 @@ static int fecmxc_probe(struct udevice *dev) priv->dev_id = dev_seq(dev); + if (IS_ENABLED(CONFIG_DM_MDIO)) { + ret = dm_fec_bind_mdio(dev); + if (ret && ret != -ENODEV) + return ret; + } + #ifdef CONFIG_DM_ETH_PHY bus = eth_phy_get_mdio_bus(dev); #endif From patchwork Tue Oct 4 16:49:17 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Tim Harvey X-Patchwork-Id: 1686042 X-Patchwork-Delegate: rfried.dev@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (P-384)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4MhkGv0V86z1ypH for ; Wed, 5 Oct 2022 03:50:47 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 41FA184DFB; Tue, 4 Oct 2022 18:49:52 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id E421684E17; Tue, 4 Oct 2022 18:49:34 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from finn.localdomain (finn.gateworks.com [108.161.129.64]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 690E084D5A for ; Tue, 4 Oct 2022 18:49:27 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=tharvey@gateworks.com Received: from 068-189-091-139.biz.spectrum.com ([68.189.91.139] helo=tharvey.pdc.gateworks.com) by finn.localdomain with esmtp (Exim 4.93) (envelope-from ) id 1ofl6j-00HAgS-HY; Tue, 04 Oct 2022 16:49:25 +0000 From: Tim Harvey To: u-boot@lists.denx.de, Joe Hershberger , Ramon Fried , Vladimir Oltean , Stefano Babic , Fabio Estevam , "NXP i . MX U-Boot Team" , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Tim Harvey , Fabio Estevam Subject: [PATCH v5 7/8] net: add MV88E61xx DSA driver Date: Tue, 4 Oct 2022 09:49:17 -0700 Message-Id: <20221004164918.2251714-8-tharvey@gateworks.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221004164918.2251714-1-tharvey@gateworks.com> References: <20221004164918.2251714-1-tharvey@gateworks.com> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.6 at phobos.denx.de X-Virus-Status: Clean Add a DSA driver for the MV88E61xx compatible GbE Ethernet switches. Cc: Marek Behún Cc: Vladimir Oltean Signed-off-by: Tim Harvey Reviewed-by: Vladimir Oltean Reviewed-by: Fabio Estevam --- v5: - added support for MV88E6320 - added Fabio's rb tag v4: - rename to mv88e6xxx - sort includes alphabetically - remove dsa term from function names - reduce indentation level and remove unecessary code in of probe_mdio function - rename pdev to mdev to represent mdio device v3: - Added Vladimir's rb tag v2: - rebase on v2022.07-rc1 (use ofnode_get_phy_node) - remove unused commented out fields from struct - remove unused PORT_MASK macro - remove phy from priv struct name - refactor code from original drivers/net/phy/mv88e61xx with suggestions from review to consolidate some functions into mv88e61xx_dsa_port_enable - remove unecessary skiping of disabling of CPU port - remove unecessary dev_set_parent_priv - remove unnecessary static init flag - replace debug with a dev_warn if switch device-id unsupported - remove unnecessary xmit/recv functions as we rely on the fact that only a single port is active instead of mangling packets --- drivers/net/Kconfig | 7 + drivers/net/Makefile | 1 + drivers/net/mv88e6xxx.c | 833 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 841 insertions(+) create mode 100644 drivers/net/mv88e6xxx.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6bbbadc5eef3..5508dacbcc49 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -438,6 +438,13 @@ config KSZ9477 This driver implements a DSA switch driver for the KSZ9477 family of GbE switches using the I2C interface. +config MV88E6XXX + bool "Marvell MV88E6xxx GbE switch DSA driver" + depends on DM_DSA && DM_MDIO + help + This driver implements a DSA switch driver for the MV88E6xxx family + of GbE switches using the MDIO interface + config MVGBE bool "Marvell Orion5x/Kirkwood network interface support" depends on ARCH_KIRKWOOD || ARCH_ORION5X diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 96b7678e9882..f05fd58e3fa7 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_MEDIATEK_ETH) += mtk_eth.o obj-$(CONFIG_MPC8XX_FEC) += mpc8xx_fec.o obj-$(CONFIG_MT7620_ETH) += mt7620-eth.o obj-$(CONFIG_MT7628_ETH) += mt7628-eth.o +obj-$(CONFIG_MV88E6XXX) += mv88e6xxx.o obj-$(CONFIG_MVGBE) += mvgbe.o obj-$(CONFIG_MVMDIO) += mvmdio.o obj-$(CONFIG_MVNETA) += mvneta.o diff --git a/drivers/net/mv88e6xxx.c b/drivers/net/mv88e6xxx.c new file mode 100644 index 000000000000..e59e2464c641 --- /dev/null +++ b/drivers/net/mv88e6xxx.c @@ -0,0 +1,833 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2022 + * Gateworks Corporation + * Tim Harvey + * + * (C) Copyright 2015 + * Elecsys Corporation + * Kevin Smith + * + * Original driver: + * (C) Copyright 2009 + * Marvell Semiconductor + * Prafulla Wadaskar + */ + +/* + * DSA driver for mv88e6xxx ethernet switches. + * + * This driver configures the mv88e6xxx for basic use as a DSA switch. + * + * This driver was adapted from drivers/net/phy/mv88e61xx and tested + * on the mv88e6176 via an SGMII interface. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Device addresses */ +#define DEVADDR_PHY(p) (p) +#define DEVADDR_SERDES 0x0F + +/* SMI indirection registers for multichip addressing mode */ +#define SMI_CMD_REG 0x00 +#define SMI_DATA_REG 0x01 + +/* Global registers */ +#define GLOBAL1_STATUS 0x00 +#define GLOBAL1_CTRL 0x04 +#define GLOBAL1_MON_CTRL 0x1A + +/* Global 2 registers */ +#define GLOBAL2_REG_PHY_CMD 0x18 +#define GLOBAL2_REG_PHY_DATA 0x19 +#define GLOBAL2_REG_SCRATCH 0x1A + +/* Port registers */ +#define PORT_REG_STATUS 0x00 +#define PORT_REG_PHYS_CTRL 0x01 +#define PORT_REG_SWITCH_ID 0x03 +#define PORT_REG_CTRL 0x04 +#define PORT_REG_VLAN_MAP 0x06 +#define PORT_REG_VLAN_ID 0x07 +#define PORT_REG_LED_CTRL 0x16 + +/* Phy registers */ +#define PHY_REG_CTRL1 0x10 +#define PHY_REG_STATUS1 0x11 +#define PHY_REG_PAGE 0x16 + +/* Serdes registers */ +#define SERDES_REG_CTRL_1 0x10 + +/* Phy page numbers */ +#define PHY_PAGE_COPPER 0 +#define PHY_PAGE_SERDES 1 + +/* Register fields */ +#define GLOBAL1_CTRL_SWRESET BIT(15) + +#define GLOBAL1_MON_CTRL_CPUDEST_SHIFT 4 +#define GLOBAL1_MON_CTRL_CPUDEST_WIDTH 4 + +#define PORT_REG_STATUS_SPEED_SHIFT 8 +#define PORT_REG_STATUS_SPEED_10 0 +#define PORT_REG_STATUS_SPEED_100 1 +#define PORT_REG_STATUS_SPEED_1000 2 + +#define PORT_REG_STATUS_CMODE_MASK 0xF +#define PORT_REG_STATUS_CMODE_100BASE_X 0x8 +#define PORT_REG_STATUS_CMODE_1000BASE_X 0x9 +#define PORT_REG_STATUS_CMODE_SGMII 0xa + +#define PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK BIT(15) +#define PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK BIT(14) +#define PORT_REG_PHYS_CTRL_PCS_AN_EN BIT(10) +#define PORT_REG_PHYS_CTRL_PCS_AN_RST BIT(9) +#define PORT_REG_PHYS_CTRL_FC_VALUE BIT(7) +#define PORT_REG_PHYS_CTRL_FC_FORCE BIT(6) +#define PORT_REG_PHYS_CTRL_LINK_VALUE BIT(5) +#define PORT_REG_PHYS_CTRL_LINK_FORCE BIT(4) +#define PORT_REG_PHYS_CTRL_DUPLEX_VALUE BIT(3) +#define PORT_REG_PHYS_CTRL_DUPLEX_FORCE BIT(2) +#define PORT_REG_PHYS_CTRL_SPD1000 BIT(1) +#define PORT_REG_PHYS_CTRL_SPD100 BIT(0) +#define PORT_REG_PHYS_CTRL_SPD_MASK (BIT(1) | BIT(0)) + +#define PORT_REG_CTRL_PSTATE_SHIFT 0 +#define PORT_REG_CTRL_PSTATE_WIDTH 2 + +#define PORT_REG_VLAN_ID_DEF_VID_SHIFT 0 +#define PORT_REG_VLAN_ID_DEF_VID_WIDTH 12 + +#define PORT_REG_VLAN_MAP_TABLE_SHIFT 0 +#define PORT_REG_VLAN_MAP_TABLE_WIDTH 11 + +#define SERDES_REG_CTRL_1_FORCE_LINK BIT(10) + +/* Field values */ +#define PORT_REG_CTRL_PSTATE_DISABLED 0 +#define PORT_REG_CTRL_PSTATE_FORWARD 3 + +#define PHY_REG_CTRL1_ENERGY_DET_OFF 0 +#define PHY_REG_CTRL1_ENERGY_DET_SENSE_PULSE 1 +#define PHY_REG_CTRL1_ENERGY_DET_SENSE_ONLY 2 +#define PHY_REG_CTRL1_ENERGY_DET_SENSE_XMIT 3 + +/* PHY Status Register */ +#define PHY_REG_STATUS1_SPEED 0xc000 +#define PHY_REG_STATUS1_GBIT 0x8000 +#define PHY_REG_STATUS1_100 0x4000 +#define PHY_REG_STATUS1_DUPLEX 0x2000 +#define PHY_REG_STATUS1_SPDDONE 0x0800 +#define PHY_REG_STATUS1_LINK 0x0400 +#define PHY_REG_STATUS1_ENERGY 0x0010 + +/* + * Macros for building commands for indirect addressing modes. These are valid + * for both the indirect multichip addressing mode and the PHY indirection + * required for the writes to any PHY register. + */ +#define SMI_BUSY BIT(15) +#define SMI_CMD_CLAUSE_22 BIT(12) +#define SMI_CMD_CLAUSE_22_OP_READ (2 << 10) +#define SMI_CMD_CLAUSE_22_OP_WRITE (1 << 10) + +#define SMI_CMD_READ (SMI_BUSY | SMI_CMD_CLAUSE_22 | \ + SMI_CMD_CLAUSE_22_OP_READ) +#define SMI_CMD_WRITE (SMI_BUSY | SMI_CMD_CLAUSE_22 | \ + SMI_CMD_CLAUSE_22_OP_WRITE) + +#define SMI_CMD_ADDR_SHIFT 5 +#define SMI_CMD_ADDR_WIDTH 5 +#define SMI_CMD_REG_SHIFT 0 +#define SMI_CMD_REG_WIDTH 5 + +/* Defines for Scratch and Misc Registers */ +#define SCRATCH_UPDATE BIT(15) +#define SCRATCH_ADDR_SHIFT 8 +#define SCRATCH_ADDR_WIDTH 7 + +/* Scratch registers */ +#define SCRATCH_ADDR_GPIO0DIR 0x62 /* GPIO[7:0] direction 1=input */ +#define SCRATCH_ADDR_GPIO1DIR 0x63 /* GPIO[14:8] direction 1=input */ +#define SCRATCH_ADDR_GPIO0DATA 0x64 /* GPIO[7:0] data */ +#define SCRATCH_ADDR_GPIO1DATA 0x65 /* GPIO[14:8] data */ +#define SCRATCH_ADDR_GPIO0CTRL 0x68 /* GPIO[1:0] control */ +#define SCRATCH_ADDR_GPIO1CTRL 0x69 /* GPIO[3:2] control */ + +/* ID register values for different switch models */ +#define PORT_SWITCH_ID_6020 0x0200 +#define PORT_SWITCH_ID_6070 0x0700 +#define PORT_SWITCH_ID_6071 0x0710 +#define PORT_SWITCH_ID_6096 0x0980 +#define PORT_SWITCH_ID_6097 0x0990 +#define PORT_SWITCH_ID_6172 0x1720 +#define PORT_SWITCH_ID_6176 0x1760 +#define PORT_SWITCH_ID_6220 0x2200 +#define PORT_SWITCH_ID_6240 0x2400 +#define PORT_SWITCH_ID_6250 0x2500 +#define PORT_SWITCH_ID_6320 0x1150 +#define PORT_SWITCH_ID_6352 0x3520 + +struct mv88e6xxx_priv { + int smi_addr; + int id; + int port_count; /* Number of switch ports */ + int port_reg_base; /* Base of the switch port registers */ + u8 global1; /* Offset of Switch Global 1 registers */ + u8 global2; /* Offset of Switch Global 2 registers */ + u8 phy_ctrl1_en_det_shift; /* 'EDet' bit field offset */ + u8 phy_ctrl1_en_det_width; /* Width of 'EDet' bit field */ + u8 phy_ctrl1_en_det_ctrl; /* 'EDet' control value */ +}; + +static inline int smi_cmd(int cmd, int addr, int reg) +{ + cmd = bitfield_replace(cmd, SMI_CMD_ADDR_SHIFT, SMI_CMD_ADDR_WIDTH, + addr); + cmd = bitfield_replace(cmd, SMI_CMD_REG_SHIFT, SMI_CMD_REG_WIDTH, reg); + return cmd; +} + +static inline int smi_cmd_read(int addr, int reg) +{ + return smi_cmd(SMI_CMD_READ, addr, reg); +} + +static inline int smi_cmd_write(int addr, int reg) +{ + return smi_cmd(SMI_CMD_WRITE, addr, reg); +} + +/* Wait for the current SMI indirect command to complete */ +static int mv88e6xxx_smi_wait(struct udevice *dev, int smi_addr) +{ + int val; + u32 timeout = 100; + + do { + val = dm_mdio_read(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_CMD_REG); + if (val >= 0 && (val & SMI_BUSY) == 0) + return 0; + + mdelay(1); + } while (--timeout); + + dev_err(dev, "SMI busy timeout\n"); + return -ETIMEDOUT; +} + +/* + * The mv88e6xxx has three types of addresses: the smi bus address, the device + * address, and the register address. The smi bus address distinguishes it on + * the smi bus from other PHYs or switches. The device address determines + * which on-chip register set you are reading/writing (the various PHYs, their + * associated ports, or global configuration registers). The register address + * is the offset of the register you are reading/writing. + * + * When the mv88e6xxx is hardware configured to have address zero, it behaves in + * single-chip addressing mode, where it responds to all SMI addresses, using + * the smi address as its device address. This obviously only works when this + * is the only chip on the SMI bus. This allows the driver to access device + * registers without using indirection. When the chip is configured to a + * non-zero address, it only responds to that SMI address and requires indirect + * writes to access the different device addresses. + */ +static int mv88e6xxx_reg_read(struct udevice *dev, int addr, int reg) +{ + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + int smi_addr = priv->smi_addr; + int res; + + /* In single-chip mode, the device can be addressed directly */ + if (smi_addr == 0) + return dm_mdio_read(dev->parent, addr, MDIO_DEVAD_NONE, reg); + + /* Wait for the bus to become free */ + res = mv88e6xxx_smi_wait(dev, smi_addr); + if (res < 0) + return res; + + /* Issue the read command */ + res = dm_mdio_write(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_CMD_REG, + smi_cmd_read(addr, reg)); + if (res < 0) + return res; + + /* Wait for the read command to complete */ + res = mv88e6xxx_smi_wait(dev, smi_addr); + if (res < 0) + return res; + + /* Read the data */ + res = dm_mdio_read(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_DATA_REG); + if (res < 0) + return res; + + return bitfield_extract(res, 0, 16); +} + +/* See the comment above mv88e6xxx_reg_read */ +static int mv88e6xxx_reg_write(struct udevice *dev, int addr, int reg, u16 val) +{ + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + int smi_addr = priv->smi_addr; + int res; + + /* In single-chip mode, the device can be addressed directly */ + if (smi_addr == 0) + return dm_mdio_write(dev->parent, addr, MDIO_DEVAD_NONE, reg, val); + + /* Wait for the bus to become free */ + res = mv88e6xxx_smi_wait(dev, smi_addr); + if (res < 0) + return res; + + /* Set the data to write */ + res = dm_mdio_write(dev->parent, smi_addr, MDIO_DEVAD_NONE, + SMI_DATA_REG, val); + if (res < 0) + return res; + + /* Issue the write command */ + res = dm_mdio_write(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_CMD_REG, + smi_cmd_write(addr, reg)); + if (res < 0) + return res; + + /* Wait for the write command to complete */ + res = mv88e6xxx_smi_wait(dev, smi_addr); + if (res < 0) + return res; + + return 0; +} + +static int mv88e6xxx_phy_wait(struct udevice *dev) +{ + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + int val; + u32 timeout = 100; + + do { + val = mv88e6xxx_reg_read(dev, priv->global2, GLOBAL2_REG_PHY_CMD); + if (val >= 0 && (val & SMI_BUSY) == 0) + return 0; + + mdelay(1); + } while (--timeout); + + return -ETIMEDOUT; +} + +static int mv88e6xxx_phy_read_indirect(struct udevice *dev, int phyad, int devad, int reg) +{ + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + int res; + + /* Issue command to read */ + res = mv88e6xxx_reg_write(dev, priv->global2, + GLOBAL2_REG_PHY_CMD, + smi_cmd_read(phyad, reg)); + + /* Wait for data to be read */ + res = mv88e6xxx_phy_wait(dev); + if (res < 0) + return res; + + /* Read retrieved data */ + return mv88e6xxx_reg_read(dev, priv->global2, + GLOBAL2_REG_PHY_DATA); +} + +static int mv88e6xxx_phy_write_indirect(struct udevice *dev, int phyad, + int devad, int reg, u16 data) +{ + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + int res; + + /* Set the data to write */ + res = mv88e6xxx_reg_write(dev, priv->global2, + GLOBAL2_REG_PHY_DATA, data); + if (res < 0) + return res; + /* Issue the write command */ + res = mv88e6xxx_reg_write(dev, priv->global2, + GLOBAL2_REG_PHY_CMD, + smi_cmd_write(phyad, reg)); + if (res < 0) + return res; + + /* Wait for command to complete */ + return mv88e6xxx_phy_wait(dev); +} + +/* Wrapper function to make calls to phy_read_indirect simpler */ +static int mv88e6xxx_phy_read(struct udevice *dev, int phy, int reg) +{ + return mv88e6xxx_phy_read_indirect(dev, DEVADDR_PHY(phy), + MDIO_DEVAD_NONE, reg); +} + +/* Wrapper function to make calls to phy_write_indirect simpler */ +static int mv88e6xxx_phy_write(struct udevice *dev, int phy, int reg, u16 val) +{ + return mv88e6xxx_phy_write_indirect(dev, DEVADDR_PHY(phy), + MDIO_DEVAD_NONE, reg, val); +} + +static int mv88e6xxx_port_read(struct udevice *dev, u8 port, u8 reg) +{ + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + + return mv88e6xxx_reg_read(dev, priv->port_reg_base + port, reg); +} + +static int mv88e6xxx_port_write(struct udevice *dev, u8 port, u8 reg, u16 val) +{ + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + + return mv88e6xxx_reg_write(dev, priv->port_reg_base + port, reg, val); +} + +static int mv88e6xxx_set_page(struct udevice *dev, u8 phy, u8 page) +{ + return mv88e6xxx_phy_write(dev, phy, PHY_REG_PAGE, page); +} + +static int mv88e6xxx_get_switch_id(struct udevice *dev) +{ + int res; + + res = mv88e6xxx_port_read(dev, 0, PORT_REG_SWITCH_ID); + if (res < 0) + return res; + return res & 0xfff0; +} + +static bool mv88e6xxx_6352_family(struct udevice *dev) +{ + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + + switch (priv->id) { + case PORT_SWITCH_ID_6172: + case PORT_SWITCH_ID_6176: + case PORT_SWITCH_ID_6240: + case PORT_SWITCH_ID_6352: + return true; + } + return false; +} + +static int mv88e6xxx_get_cmode(struct udevice *dev, u8 port) +{ + int res; + + res = mv88e6xxx_port_read(dev, port, PORT_REG_STATUS); + if (res < 0) + return res; + return res & PORT_REG_STATUS_CMODE_MASK; +} + +static int mv88e6xxx_switch_reset(struct udevice *dev) +{ + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + int time; + int val; + u8 port; + + /* Disable all ports */ + for (port = 0; port < priv->port_count; port++) { + val = mv88e6xxx_port_read(dev, port, PORT_REG_CTRL); + if (val < 0) + return val; + val = bitfield_replace(val, PORT_REG_CTRL_PSTATE_SHIFT, + PORT_REG_CTRL_PSTATE_WIDTH, + PORT_REG_CTRL_PSTATE_DISABLED); + val = mv88e6xxx_port_write(dev, port, PORT_REG_CTRL, val); + if (val < 0) + return val; + } + + /* Wait 2 ms for queues to drain */ + udelay(2000); + + /* Reset switch */ + val = mv88e6xxx_reg_read(dev, priv->global1, GLOBAL1_CTRL); + if (val < 0) + return val; + val |= GLOBAL1_CTRL_SWRESET; + val = mv88e6xxx_reg_write(dev, priv->global1, GLOBAL1_CTRL, val); + if (val < 0) + return val; + + /* Wait up to 1 second for switch reset complete */ + for (time = 1000; time; time--) { + val = mv88e6xxx_reg_read(dev, priv->global1, GLOBAL1_CTRL); + if (val >= 0 && ((val & GLOBAL1_CTRL_SWRESET) == 0)) + break; + udelay(1000); + } + if (!time) + return -ETIMEDOUT; + + return 0; +} + +static int mv88e6xxx_serdes_init(struct udevice *dev) +{ + int val; + + val = mv88e6xxx_set_page(dev, DEVADDR_SERDES, PHY_PAGE_SERDES); + if (val < 0) + return val; + + /* Power up serdes module */ + val = mv88e6xxx_phy_read(dev, DEVADDR_SERDES, MII_BMCR); + if (val < 0) + return val; + val &= ~(BMCR_PDOWN); + val = mv88e6xxx_phy_write(dev, DEVADDR_SERDES, MII_BMCR, val); + if (val < 0) + return val; + + return 0; +} + +static int mv88e6xxx_fixed_port_setup(struct udevice *dev, u8 port) +{ + struct dsa_pdata *dsa_pdata = dev_get_uclass_plat(dev); + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + int val; + + val = mv88e6xxx_port_read(dev, port, PORT_REG_PHYS_CTRL); + if (val < 0) + return val; + + val &= ~(PORT_REG_PHYS_CTRL_SPD_MASK | + PORT_REG_PHYS_CTRL_FC_VALUE | + PORT_REG_PHYS_CTRL_FC_FORCE); + val |= PORT_REG_PHYS_CTRL_FC_FORCE | + PORT_REG_PHYS_CTRL_DUPLEX_VALUE | + PORT_REG_PHYS_CTRL_DUPLEX_FORCE; + + if (priv->id == PORT_SWITCH_ID_6071) { + val |= PORT_REG_PHYS_CTRL_SPD100; + } else { + val |= PORT_REG_PHYS_CTRL_PCS_AN_EN | + PORT_REG_PHYS_CTRL_PCS_AN_RST | + PORT_REG_PHYS_CTRL_SPD1000; + } + + if (port == dsa_pdata->cpu_port) + val |= PORT_REG_PHYS_CTRL_LINK_VALUE | + PORT_REG_PHYS_CTRL_LINK_FORCE; + + return mv88e6xxx_port_write(dev, port, PORT_REG_PHYS_CTRL, val); +} + +/* + * This function is used to pre-configure the required register + * offsets, so that the indirect register access to the PHY registers + * is possible. This is necessary to be able to read the PHY ID + * while driver probing or in get_phy_id(). The globalN register + * offsets must be initialized correctly for a detected switch, + * otherwise detection of the PHY ID won't work! + */ +static int mv88e6xxx_priv_reg_offs_pre_init(struct udevice *dev) +{ + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + + /* + * Initial 'port_reg_base' value must be an offset of existing + * port register, then reading the ID should succeed. First, try + * to read via port registers with device address 0x10 (88E6096 + * and compatible switches). + */ + priv->port_reg_base = 0x10; + priv->id = mv88e6xxx_get_switch_id(dev); + if (priv->id != 0xfff0) { + priv->global1 = 0x1B; + priv->global2 = 0x1C; + return 0; + } + + /* + * Now try via port registers with device address 0x08 + * (88E6020 and compatible switches). + */ + priv->port_reg_base = 0x08; + priv->id = mv88e6xxx_get_switch_id(dev); + if (priv->id != 0xfff0) { + priv->global1 = 0x0F; + priv->global2 = 0x07; + return 0; + } + + dev_warn(dev, "%s Unknown ID 0x%x\n", __func__, priv->id); + + return -ENODEV; +} + +static int mv88e6xxx_mdio_read(struct udevice *dev, int addr, int devad, int reg) +{ + return mv88e6xxx_phy_read_indirect(dev->parent, DEVADDR_PHY(addr), + MDIO_DEVAD_NONE, reg); +} + +static int mv88e6xxx_mdio_write(struct udevice *dev, int addr, int devad, + int reg, u16 val) +{ + return mv88e6xxx_phy_write_indirect(dev->parent, DEVADDR_PHY(addr), + MDIO_DEVAD_NONE, reg, val); +} + +static const struct mdio_ops mv88e6xxx_mdio_ops = { + .read = mv88e6xxx_mdio_read, + .write = mv88e6xxx_mdio_write, +}; + +static int mv88e6xxx_mdio_bind(struct udevice *dev) +{ + char name[32]; + static int num_devices; + + sprintf(name, "mv88e6xxx-mdio-%d", num_devices++); + device_set_name(dev, name); + + return 0; +} + +U_BOOT_DRIVER(mv88e6xxx_mdio) = { + .name = "mv88e6xxx_mdio", + .id = UCLASS_MDIO, + .ops = &mv88e6xxx_mdio_ops, + .bind = mv88e6xxx_mdio_bind, + .priv_auto = sizeof(struct mv88e6xxx_priv), + .plat_auto = sizeof(struct mdio_perdev_priv), +}; + +static int mv88e6xxx_port_enable(struct udevice *dev, int port, struct phy_device *phy) +{ + struct dsa_pdata *dsa_pdata = dev_get_uclass_plat(dev); + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + int val, ret; + + dev_dbg(dev, "%s P%d phy:0x%08x %s\n", __func__, port, + phy->phy_id, phy_string_for_interface(phy->interface)); + + /* + * Enable energy-detect sensing on PHY, used to determine when a PHY + * port is physically connected + */ + val = mv88e6xxx_phy_read(dev, port, PHY_REG_CTRL1); + if (val < 0) + return val; + val = bitfield_replace(val, priv->phy_ctrl1_en_det_shift, + priv->phy_ctrl1_en_det_width, + priv->phy_ctrl1_en_det_ctrl); + val = mv88e6xxx_phy_write(dev, port, PHY_REG_CTRL1, val); + if (val < 0) + return val; + + /* enable port */ + val = mv88e6xxx_port_read(dev, port, PORT_REG_CTRL); + if (val < 0) + return val; + val = bitfield_replace(val, PORT_REG_CTRL_PSTATE_SHIFT, + PORT_REG_CTRL_PSTATE_WIDTH, + PORT_REG_CTRL_PSTATE_FORWARD); + val = mv88e6xxx_port_write(dev, port, PORT_REG_CTRL, val); + if (val < 0) + return val; + + /* configure RGMII delays for fixed link */ + if (phy->phy_id == PHY_FIXED_ID) { + /* Physical Control register: Table 62 */ + val = mv88e6xxx_port_read(dev, port, PORT_REG_PHYS_CTRL); + val &= ~(PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK || + PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK); + if (phy->interface == PHY_INTERFACE_MODE_RGMII_ID || + phy->interface == PHY_INTERFACE_MODE_RGMII_RXID) + val |= PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK; + if (phy->interface == PHY_INTERFACE_MODE_RGMII_ID || + phy->interface == PHY_INTERFACE_MODE_RGMII_TXID) + val |= PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK; + val |= BIT(5) | BIT(4); /* Force link */ + ret = mv88e6xxx_port_write(dev, port, PORT_REG_PHYS_CTRL, val); + if (ret < 0) + return ret; + + ret = mv88e6xxx_fixed_port_setup(dev, port); + if (ret < 0) + return ret; + } + + if (port == dsa_pdata->cpu_port) { + /* Set CPUDest for cpu port */ + val = mv88e6xxx_reg_read(dev, priv->global1, GLOBAL1_MON_CTRL); + if (val < 0) + return val; + val = bitfield_replace(val, GLOBAL1_MON_CTRL_CPUDEST_SHIFT, + GLOBAL1_MON_CTRL_CPUDEST_WIDTH, port); + val = mv88e6xxx_reg_write(dev, priv->global1, GLOBAL1_MON_CTRL, val); + if (val < 0) + return val; + + if (mv88e6xxx_6352_family(dev)) { + /* initialize serdes */ + val = mv88e6xxx_get_cmode(dev, dsa_pdata->cpu_port); + if (val < 0) + return val; + if (val == PORT_REG_STATUS_CMODE_100BASE_X || + val == PORT_REG_STATUS_CMODE_1000BASE_X || + val == PORT_REG_STATUS_CMODE_SGMII) { + val = mv88e6xxx_serdes_init(dev); + if (val < 0) + return val; + } + } + } + + return 0; +} + +static void mv88e6xxx_port_disable(struct udevice *dev, int port, struct phy_device *phy) +{ + int val; + + dev_dbg(dev, "%s P%d phy:0x%x\n", __func__, port, phy->phy_id); + + val = mv88e6xxx_port_read(dev, port, PORT_REG_CTRL); + if (val < 0) + return; + val = bitfield_replace(val, PORT_REG_CTRL_PSTATE_SHIFT, + PORT_REG_CTRL_PSTATE_WIDTH, + PORT_REG_CTRL_PSTATE_DISABLED); + val = mv88e6xxx_port_write(dev, port, PORT_REG_CTRL, val); + if (val < 0) + return; +} + +static const struct dsa_ops mv88e6xxx_dsa_ops = { + .port_enable = mv88e6xxx_port_enable, + .port_disable = mv88e6xxx_port_disable, +}; + +/* bind and probe the switch mdios */ +static int mv88e6xxx_probe_mdio(struct udevice *dev) +{ + struct udevice *mdev; + ofnode node, mdios; + const char *name; + int ret; + + /* bind phy ports of mdios child node to mv88e6xxx_mdio device */ + mdios = dev_read_subnode(dev, "mdios"); + if (!ofnode_valid(mdios)) + return 0; + + ofnode_for_each_subnode(node, mdios) { + name = ofnode_get_name(node); + ret = device_bind_driver_to_node(dev, + "mv88e6xxx_mdio", + name, node, NULL); + if (ret) { + dev_err(dev, "failed to bind %s: %d\n", name, ret); + continue; + } + + /* need to probe it as there is no compatible to do so */ + ret = uclass_get_device_by_ofnode(UCLASS_MDIO, node, &mdev); + if (ret) { + dev_err(dev, "failed to probe %s: %d\n", name, ret); + continue; + } + } + + return ret; +} + +static int mv88e6xxx_probe(struct udevice *dev) +{ + struct mv88e6xxx_priv *priv = dev_get_priv(dev); + struct udevice *master = dsa_get_master(dev); + int ret; + + if (!master) + return -ENODEV; + + dev_dbg(dev, "%s master:%s\n", __func__, master->name); + + /* probe internal mdio bus */ + ret = mv88e6xxx_probe_mdio(dev); + if (ret) + return ret; + + ret = mv88e6xxx_priv_reg_offs_pre_init(dev); + if (ret) + return ret; + + dev_dbg(dev, "ID=0x%x PORT_BASE=0x%02x GLOBAL1=0x%02x GLOBAL2=0x%02x\n", + priv->id, priv->port_reg_base, priv->global1, priv->global2); + switch (priv->id) { + case PORT_SWITCH_ID_6096: + case PORT_SWITCH_ID_6097: + case PORT_SWITCH_ID_6172: + case PORT_SWITCH_ID_6176: + case PORT_SWITCH_ID_6240: + case PORT_SWITCH_ID_6352: + priv->port_count = 11; + priv->phy_ctrl1_en_det_shift = 8; + priv->phy_ctrl1_en_det_width = 2; + priv->phy_ctrl1_en_det_ctrl = + PHY_REG_CTRL1_ENERGY_DET_SENSE_XMIT; + break; + case PORT_SWITCH_ID_6020: + case PORT_SWITCH_ID_6070: + case PORT_SWITCH_ID_6071: + case PORT_SWITCH_ID_6220: + case PORT_SWITCH_ID_6250: + case PORT_SWITCH_ID_6320: + priv->port_count = 7; + priv->phy_ctrl1_en_det_shift = 14; + priv->phy_ctrl1_en_det_width = 1; + priv->phy_ctrl1_en_det_ctrl = + PHY_REG_CTRL1_ENERGY_DET_SENSE_PULSE; + break; + default: + return -ENODEV; + } + + ret = mv88e6xxx_switch_reset(dev); + if (ret < 0) + return ret; + + dsa_set_tagging(dev, 0, 0); + + return 0; +} + +static const struct udevice_id mv88e6xxx_ids[] = { + { .compatible = "marvell,mv88e6085" }, + { } +}; + +U_BOOT_DRIVER(mv88e6xxx) = { + .name = "mv88e6xxx", + .id = UCLASS_DSA, + .of_match = mv88e6xxx_ids, + .probe = mv88e6xxx_probe, + .ops = &mv88e6xxx_dsa_ops, + .priv_auto = sizeof(struct mv88e6xxx_priv), +}; From patchwork Tue Oct 4 16:49:18 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tim Harvey X-Patchwork-Id: 1686041 X-Patchwork-Delegate: rfried.dev@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (P-384)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4MhkGg48gZz1ypH for ; Wed, 5 Oct 2022 03:50:35 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 6551084E0A; Tue, 4 Oct 2022 18:49:49 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id 048E384E16; Tue, 4 Oct 2022 18:49:34 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from finn.localdomain (finn.gateworks.com [108.161.129.64]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id C111884DF8 for ; Tue, 4 Oct 2022 18:49:28 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=tharvey@gateworks.com Received: from 068-189-091-139.biz.spectrum.com ([68.189.91.139] helo=tharvey.pdc.gateworks.com) by finn.localdomain with esmtp (Exim 4.93) (envelope-from ) id 1ofl6k-00HAgS-8d; Tue, 04 Oct 2022 16:49:26 +0000 From: Tim Harvey To: u-boot@lists.denx.de, Joe Hershberger , Ramon Fried , Vladimir Oltean , Stefano Babic , Fabio Estevam , "NXP i . MX U-Boot Team" , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Tim Harvey , Fabio Estevam Subject: [PATCH v5 8/8] board: gw_ventana: enable MV88E61XX DSA support Date: Tue, 4 Oct 2022 09:49:18 -0700 Message-Id: <20221004164918.2251714-9-tharvey@gateworks.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221004164918.2251714-1-tharvey@gateworks.com> References: <20221004164918.2251714-1-tharvey@gateworks.com> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.6 at phobos.denx.de X-Virus-Status: Clean Add MV88E61XX DSA support: - update dt: U-Boot dsa driver requires different device-tree syntax than the linux driver in order to link the dsa ports to the mdio bus. - update defconfig - replace mv88e61xx_hw_reset weak override with board_phy_config support for mv88e61xx configuration that is outside the scope of the DSA driver Note that the dt changes were not placed in a u-boot.dtsi as it is intended that these changes get merged with the Linux dt's. Signed-off-by: Tim Harvey Reviewed-by: Fabio Estevam --- v5: - fix typo in defconfig s/MV88E61XX/MV88E6XXX - added Fabio's rb tag - added note to commit log v4: - use standard Linux internal MDIO dt structure - use PHY_FIXED_ID define v3: - move mdio's mdio@0 subnode v2: no changes --- arch/arm/dts/imx6qdl-gw5904.dtsi | 31 +++++++++++++++ board/gateworks/gw_ventana/gw_ventana.c | 50 +++++++++---------------- configs/gwventana_gw5904_defconfig | 7 ++-- drivers/net/mv88e6xxx.c | 29 ++++++-------- 4 files changed, 64 insertions(+), 53 deletions(-) diff --git a/arch/arm/dts/imx6qdl-gw5904.dtsi b/arch/arm/dts/imx6qdl-gw5904.dtsi index 612b6e068e28..487dd7648274 100644 --- a/arch/arm/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/dts/imx6qdl-gw5904.dtsi @@ -212,6 +212,27 @@ compatible = "marvell,mv88e6085"; reg = <0>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + sw_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + sw_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + sw_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + }; + ports { #address-cells = <1>; #size-cells = <0>; @@ -219,27 +240,37 @@ port@0 { reg = <0>; label = "lan4"; + phy-handle = <&sw_phy0>; }; port@1 { reg = <1>; label = "lan3"; + phy-handle = <&sw_phy1>; }; port@2 { reg = <2>; label = "lan2"; + phy-handle = <&sw_phy2>; }; port@3 { reg = <3>; label = "lan1"; + phy-handle = <&sw_phy3>; }; port@5 { reg = <5>; label = "cpu"; ethernet = <&fec>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; }; }; }; diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 99f52b9953e2..1c3da2c82707 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -83,44 +83,30 @@ int board_phy_config(struct phy_device *phydev) break; } + /* Fixed PHY: for GW5904/GW5909 this is Marvell 88E6176 GbE Switch */ + if (phydev->phy_id == PHY_FIXED_ID && + (board_type == GW5904 || board_type == GW5909)) { + struct mii_dev *bus = miiphy_get_dev_by_name("mdio"); + + puts("MV88E61XX "); + /* GPIO[0] output CLK125 for RGMII_REFCLK */ + bus->write(bus, 0x1c, 0, 0x1a, (1 << 15) | (0x62 << 8) | 0xfe); + bus->write(bus, 0x1c, 0, 0x1a, (1 << 15) | (0x68 << 8) | 7); + + /* Port 0-3 LED configuration: Table 80/82 */ + /* LED configuration: 7:4-green (8=Activity) 3:0 amber (8=Link) */ + bus->write(bus, 0x10, 0, 0x16, 0x8088); + bus->write(bus, 0x11, 0, 0x16, 0x8088); + bus->write(bus, 0x12, 0, 0x16, 0x8088); + bus->write(bus, 0x13, 0, 0x16, 0x8088); + } + if (phydev->drv->config) phydev->drv->config(phydev); return 0; } -#ifdef CONFIG_MV88E61XX_SWITCH -int mv88e61xx_hw_reset(struct phy_device *phydev) -{ - struct mii_dev *bus = phydev->bus; - - /* GPIO[0] output, CLK125 */ - debug("enabling RGMII_REFCLK\n"); - bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0, - 0x1a /*MV_SCRATCH_MISC*/, - (1 << 15) | (0x62 /*MV_GPIO_DIR*/ << 8) | 0xfe); - bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0, - 0x1a /*MV_SCRATCH_MISC*/, - (1 << 15) | (0x68 /*MV_GPIO01_CNTL*/ << 8) | 7); - - /* RGMII delay - Physical Control register bit[15:14] */ - debug("setting port%d RGMII rx/tx delay\n", CONFIG_MV88E61XX_CPU_PORT); - /* forced 1000mbps full-duplex link */ - bus->write(bus, 0x10 + CONFIG_MV88E61XX_CPU_PORT, 0, 1, 0xc0fe); - phydev->autoneg = AUTONEG_DISABLE; - phydev->speed = SPEED_1000; - phydev->duplex = DUPLEX_FULL; - - /* LED configuration: 7:4-green (8=Activity) 3:0 amber (8=Link) */ - bus->write(bus, 0x10, 0, 0x16, 0x8088); - bus->write(bus, 0x11, 0, 0x16, 0x8088); - bus->write(bus, 0x12, 0, 0x16, 0x8088); - bus->write(bus, 0x13, 0, 0x16, 0x8088); - - return 0; -} -#endif // CONFIG_MV88E61XX_SWITCH - #if defined(CONFIG_VIDEO_IPUV3) static void enable_hdmi(struct display_info_t const *dev) { diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index fb5870fa5803..50115b21e263 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -109,13 +109,12 @@ CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_USDHC=y CONFIG_MTD=y CONFIG_PHYLIB=y -CONFIG_MV88E61XX_SWITCH=y -CONFIG_MV88E61XX_CPU_PORT=5 -CONFIG_MV88E61XX_PHY_PORTS=0xf -CONFIG_MV88E61XX_FIXED_PORTS=0x0 +CONFIG_PHY_FIXED=y CONFIG_DM_MDIO=y +CONFIG_DM_DSA=y CONFIG_E1000=y CONFIG_FEC_MXC=y +CONFIG_MV88E6XXX=y CONFIG_MII=y CONFIG_PCI=y CONFIG_PCIE_IMX=y diff --git a/drivers/net/mv88e6xxx.c b/drivers/net/mv88e6xxx.c index e59e2464c641..09ce6dd1142d 100644 --- a/drivers/net/mv88e6xxx.c +++ b/drivers/net/mv88e6xxx.c @@ -728,31 +728,26 @@ static const struct dsa_ops mv88e6xxx_dsa_ops = { static int mv88e6xxx_probe_mdio(struct udevice *dev) { struct udevice *mdev; - ofnode node, mdios; const char *name; + ofnode node; int ret; - /* bind phy ports of mdios child node to mv88e6xxx_mdio device */ - mdios = dev_read_subnode(dev, "mdios"); - if (!ofnode_valid(mdios)) + /* bind phy ports of mdio child node to mv88e6xxx_mdio device */ + node = dev_read_subnode(dev, "mdio"); + if (!ofnode_valid(node)) return 0; - ofnode_for_each_subnode(node, mdios) { - name = ofnode_get_name(node); - ret = device_bind_driver_to_node(dev, - "mv88e6xxx_mdio", - name, node, NULL); - if (ret) { - dev_err(dev, "failed to bind %s: %d\n", name, ret); - continue; - } - + name = ofnode_get_name(node); + ret = device_bind_driver_to_node(dev, + "mv88e6xxx_mdio", + name, node, NULL); + if (ret) { + dev_err(dev, "failed to bind %s: %d\n", name, ret); + } else { /* need to probe it as there is no compatible to do so */ ret = uclass_get_device_by_ofnode(UCLASS_MDIO, node, &mdev); - if (ret) { + if (ret) dev_err(dev, "failed to probe %s: %d\n", name, ret); - continue; - } } return ret;