From patchwork Thu Jul 28 11:18:42 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661567 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=fn1EtL0O; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp7s6HxKz9sGC for ; Thu, 28 Jul 2022 21:19:21 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234535AbiG1LTR (ORCPT ); Thu, 28 Jul 2022 07:19:17 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46976 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234498AbiG1LTQ (ORCPT ); Thu, 28 Jul 2022 07:19:16 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id CCD1466BA2; Thu, 28 Jul 2022 04:19:13 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id EEF7716CF; Thu, 28 Jul 2022 14:21:36 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com EEF7716CF DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007296; bh=lftDM8bVxbb6i7gbnpPybwAsln7Ng23i+K1fZlPSI1c=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=fn1EtL0OtZEtECdBqKaVboNrYkpOGG797U6l789I/pzRL1NYFh8N/OgLuMl1kQG+x 2T2Qh1Xqcy5QE/0S0U7/dbor0w2DnKBDPh2OlfIgxv60AZDnCDZBwfkCs/zGJ4aMUE virR/uyoWGooRumBGtpl0lRCklYzusAZ/h6c/CPE= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:11 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke , Rob Herring , Krzysztof Kozlowski , Florian Fainelli , Linus Walleij CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , , , , Rob Herring Subject: [PATCH RESEND v6 01/23] dt-bindings: ata: ahci-platform: Move dma-coherent to sata-common.yaml Date: Thu, 28 Jul 2022 14:18:42 +0300 Message-ID: <20220728111905.12427-2-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Seeing doubtfully any SATA device working without embedded DMA engine let's permit the device nodes being equipped with the dma-coherent property in case if the platform is capable of cache-coherent DMAs. As a side-effect we can drop the explicit dma-coherent property definition from the particular device schemas. Currently it concerns the Broadcom SATA AHCI controller only. Signed-off-by: Serge Semin Reviewed-by: Florian Fainelli Reviewed-by: Rob Herring --- Changelog v2: - This is a new patch created after rebasing v1 onto the 5.18-rc3 kernel. Changelog v4: - Move the dma-coherent property to the sata-common.yaml schema instead of removing it. - Remove the Hannes' rb tag. --- Documentation/devicetree/bindings/ata/ahci-platform.yaml | 2 -- Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml | 2 -- Documentation/devicetree/bindings/ata/sata-common.yaml | 2 ++ 3 files changed, 2 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml index c146ab8e14e5..9304e4731965 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml @@ -87,8 +87,6 @@ properties: description: regulator for AHCI controller - dma-coherent: true - phy-supply: description: regulator for PHY power diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml index 235a93ac86b0..4ee74df8e58a 100644 --- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml +++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml @@ -41,8 +41,6 @@ properties: interrupts: maxItems: 1 - dma-coherent: true - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml index 7ac77b1c5850..cb88d3e25e73 100644 --- a/Documentation/devicetree/bindings/ata/sata-common.yaml +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml @@ -31,6 +31,8 @@ properties: "#size-cells": const: 0 + dma-coherent: true + patternProperties: "^sata-port@[0-9a-e]$": description: | From patchwork Thu Jul 28 11:18:43 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661569 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=YZ0N71ma; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp7z477fz9sGC for ; Thu, 28 Jul 2022 21:19:27 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234498AbiG1LTU (ORCPT ); Thu, 28 Jul 2022 07:19:20 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46998 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235367AbiG1LTS (ORCPT ); Thu, 28 Jul 2022 07:19:18 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 5CB0866BA2; Thu, 28 Jul 2022 04:19:17 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 8296216D0; Thu, 28 Jul 2022 14:21:38 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 8296216D0 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007298; bh=xBUR/KR3lJUSNdxkb+DYKyStoesh1ii34AfOXeb7hN4=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=YZ0N71maBZkenY7/wUV6ibeMouEXnys+MDyAd0BxiF19Fu/DvztDaeP6u3yT1kukE HsmZaw6BYzmAvnMGiJX+rIoKPloeSqeCkvsxb0MlBZZlYMFwHCGnGbVRo1m4Lx01Mu ffKmXmRCwyD/zIHDSvNKwrJ+ELL6aCP/h1Tesemc= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:13 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke , Rob Herring , Krzysztof Kozlowski , Linus Walleij CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , , , , Rob Herring Subject: [PATCH RESEND v6 02/23] dt-bindings: ata: ahci-platform: Detach common AHCI bindings Date: Thu, 28 Jul 2022 14:18:43 +0300 Message-ID: <20220728111905.12427-3-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org In order to create a more sophisticated AHCI controller DT bindings let's divide the already available generic AHCI platform YAML schema into the platform part and a set of the common AHCI properties. The former part will be used to evaluate the AHCI DT nodes mainly compatible with the generic AHCI controller while the later schema will be used for more thorough AHCI DT nodes description. For instance such YAML schemas design will be useful for our DW AHCI SATA controller derivative with four clock sources, two reset lines, one system controller reference and specific max Rx/Tx DMA xfers size constraints. Note the phys and target-supply property requirement is preserved in the generic AHCI platform bindings because some platforms can lack of the explicitly specified PHYs or target device power regulators. Also note the SATA/AHCI ports properties have been moved to the $defs-paragraph of the schemas. It's done in order to create the extendable properties hierarchy such that particular AHCI-controller could add vendor-specific port properties. Signed-off-by: Serge Semin Reviewed-by: Rob Herring --- Folks, I don't really see why the phys/target-supply requirement has been added to the generic AHCI DT schema in the first place. Probably just to imply some meaning for the sub-nodes definition. Anyway in one of the further patches I am adding the DW AHCI SATA controller DT bindings which won't require having these properties specified in the sub-nodes, but will describe additional port-specific properties. That's why I get to keep the constraints in the ahci-platform.yaml schema instead of moving them to the common schema. Changelog v2: - This is a new patch created after rebasing v1 onto the 5.18-rc3 kernel. Changelog v3: - Replace Jens's email address with Damien's one in the list of the schema maintainers. (@Damien) Changelog v4: - Drop clocks, clock-names, resets, reset-names and power-domains properties from the common schema. (@Rob) - Create sata/ahci-port properties definition hierarchy so the sub-schemas would inherit and extend the ports properties of the super-schema. (@Rob) --- .../devicetree/bindings/ata/ahci-common.yaml | 100 ++++++++++++++++++ .../bindings/ata/ahci-platform.yaml | 72 ++----------- .../devicetree/bindings/ata/sata-common.yaml | 8 +- 3 files changed, 115 insertions(+), 65 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/ahci-common.yaml diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml new file mode 100644 index 000000000000..e89bda3b62cc --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/ahci-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Serial ATA AHCI controllers + +maintainers: + - Hans de Goede + - Damien Le Moal + +description: + This document defines device tree properties for a common AHCI SATA + controller implementation. It's hardware interface is supposed to + conform to the technical standard defined by Intel (see Serial ATA + Advanced Host Controller Interface specification for details). The + document doesn't constitute a DT-node binding by itself but merely + defines a set of common properties for the AHCI-compatible devices. + +select: false + +allOf: + - $ref: sata-common.yaml# + +properties: + reg: + description: + Generic AHCI registers space conforming to the Serial ATA AHCI + specification. + + reg-names: + description: CSR space IDs + + interrupts: + description: + Generic AHCI state change interrupt. Can be implemented either as a + single line attached to the controller or as a set of the signals + indicating the particular port events. + + ahci-supply: + description: Power regulator for AHCI controller + + target-supply: + description: Power regulator for SATA target device + + phy-supply: + description: Power regulator for SATA PHY + + phys: + description: Reference to the SATA PHY node + maxItems: 1 + + phy-names: + maxItems: 1 + + ports-implemented: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + Mask that indicates which ports the HBA supports. Useful if PI is not + programmed by the BIOS, which is true for some embedded SoC's. + maximum: 0x1f + +patternProperties: + "^sata-port@[0-9a-f]+$": + $ref: '#/$defs/ahci-port' + description: + It is optionally possible to describe the ports as sub-nodes so + to enable each port independently when dealing with multiple PHYs. + +required: + - reg + - interrupts + +additionalProperties: true + +$defs: + ahci-port: + $ref: /schemas/ata/sata-common.yaml#/$defs/sata-port + + properties: + reg: + description: AHCI SATA port identifier + maxItems: 1 + + phys: + description: Individual AHCI SATA port PHY + maxItems: 1 + + phy-names: + description: AHCI SATA port PHY ID + maxItems: 1 + + target-supply: + description: Power regulator for SATA port target device + + required: + - reg + +... diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml index 9304e4731965..15be98e0385b 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml @@ -36,8 +36,7 @@ select: - compatible allOf: - - $ref: "sata-common.yaml#" - + - $ref: "ahci-common.yaml#" properties: compatible: @@ -69,90 +68,37 @@ properties: maxItems: 1 clocks: - description: - Clock IDs array as required by the controller. minItems: 1 maxItems: 3 clock-names: - description: - Names of clocks corresponding to IDs in the clock property. minItems: 1 maxItems: 3 interrupts: maxItems: 1 - ahci-supply: - description: - regulator for AHCI controller - - phy-supply: - description: - regulator for PHY power - - phys: - description: - List of all PHYs on this controller - maxItems: 1 - - phy-names: - description: - Name specifier for the PHYs - maxItems: 1 - - ports-implemented: - $ref: '/schemas/types.yaml#/definitions/uint32' - description: | - Mask that indicates which ports that the HBA supports - are available for software to use. Useful if PORTS_IMPL - is not programmed by the BIOS, which is true with - some embedded SoCs. - maximum: 0x1f - power-domains: maxItems: 1 resets: maxItems: 1 - target-supply: - description: - regulator for SATA target power - -required: - - compatible - - reg - - interrupts - patternProperties: "^sata-port@[0-9a-f]+$": - type: object - additionalProperties: false - description: - Subnode with configuration of the Ports. - - properties: - reg: - maxItems: 1 - - phys: - maxItems: 1 - - phy-names: - maxItems: 1 - - target-supply: - description: - regulator for SATA target power - - required: - - reg + $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port anyOf: - required: [ phys ] - required: [ target-supply ] + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml index cb88d3e25e73..5a31a902618d 100644 --- a/Documentation/devicetree/bindings/ata/sata-common.yaml +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml @@ -35,9 +35,15 @@ properties: patternProperties: "^sata-port@[0-9a-e]$": + $ref: '#/$defs/sata-port' description: | DT nodes for ports connected on the SATA host. The SATA port nodes will be named "sata-port". + +additionalProperties: true + +$defs: + sata-port: type: object properties: @@ -49,6 +55,4 @@ patternProperties: multiplier making it possible to connect up to 15 disks to a single SATA port. -additionalProperties: true - ... From patchwork Thu Jul 28 11:18:44 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661581 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=DTZ0jGcz; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp8l58gBz9sGG for ; Thu, 28 Jul 2022 21:20:07 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236209AbiG1LTu (ORCPT ); Thu, 28 Jul 2022 07:19:50 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46998 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235855AbiG1LTb (ORCPT ); Thu, 28 Jul 2022 07:19:31 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 9AF1967144; Thu, 28 Jul 2022 04:19:19 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 8A08216D1; Thu, 28 Jul 2022 14:21:39 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 8A08216D1 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007299; bh=242XWgd0beiIZrzRTnwpgzsZw6dSuiW41UyARfAwlLg=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=DTZ0jGczGbJDnT17d8klxHnHVnb0FvHxm2kNmvA1WAXTmU1W4pGduZ7AF7rUKzwo8 D6V1imyQuvvOqGcZT2bxupYlRV9nvtCoYFKwDt6h0PZM99tPDqLQheqbeEChhFoSFa ud8KO89n9Y9GG3lYFoTohEtSig6wX01PfXFP1Hnc= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:14 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke , Rob Herring , Krzysztof Kozlowski CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , , , , Rob Herring Subject: [PATCH RESEND v6 03/23] dt-bindings: ata: ahci-platform: Clarify common AHCI props constraints Date: Thu, 28 Jul 2022 14:18:44 +0300 Message-ID: <20220728111905.12427-4-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Indeed in accordance with what is implemented in the AHCI platform driver and the way the AHCI DT nodes are defined in the DT files we can add the next AHCI DT properties constraints: AHCI CSR ID is fixed to 'ahci', PHY name is fixed to 'sata-phy', AHCI controller can't have more than 32 ports by design, AHCI controller can have up to 32 IRQ lines. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke Reviewed-by: Rob Herring --- Changelog v2: - This is a new patch created after rebasing v1 onto the 5.18-rc3 kernel. Changelog v4: - Fix spelling: 'imeplemtned' and 'paltform' in the patch log. (@Hannes) - Add the interrupts property constraints. (@Rob) - Add forgotten '---' patchlog-changelog separator. (@Sergei) --- .../devicetree/bindings/ata/ahci-common.yaml | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml index e89bda3b62cc..12a97b56226f 100644 --- a/Documentation/devicetree/bindings/ata/ahci-common.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml @@ -31,12 +31,16 @@ properties: reg-names: description: CSR space IDs + contains: + const: ahci interrupts: description: Generic AHCI state change interrupt. Can be implemented either as a single line attached to the controller or as a set of the signals indicating the particular port events. + minItems: 1 + maxItems: 32 ahci-supply: description: Power regulator for AHCI controller @@ -52,14 +56,13 @@ properties: maxItems: 1 phy-names: - maxItems: 1 + const: sata-phy ports-implemented: $ref: '/schemas/types.yaml#/definitions/uint32' description: Mask that indicates which ports the HBA supports. Useful if PI is not programmed by the BIOS, which is true for some embedded SoC's. - maximum: 0x1f patternProperties: "^sata-port@[0-9a-f]+$": @@ -80,8 +83,12 @@ $defs: properties: reg: - description: AHCI SATA port identifier - maxItems: 1 + description: + AHCI SATA port identifier. By design AHCI controller can't have + more than 32 ports due to the CAP.NP fields and PI register size + constraints. + minimum: 0 + maximum: 31 phys: description: Individual AHCI SATA port PHY @@ -89,7 +96,7 @@ $defs: phy-names: description: AHCI SATA port PHY ID - maxItems: 1 + const: sata-phy target-supply: description: Power regulator for SATA port target device From patchwork Thu Jul 28 11:18:45 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661571 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=l8zq9GBg; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp811BKYz9sGC for ; Thu, 28 Jul 2022 21:19:29 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235905AbiG1LTZ (ORCPT ); Thu, 28 Jul 2022 07:19:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47042 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235855AbiG1LTW (ORCPT ); Thu, 28 Jul 2022 07:19:22 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id AB1726714D; Thu, 28 Jul 2022 04:19:20 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 9E85716D2; Thu, 28 Jul 2022 14:21:40 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 9E85716D2 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007300; bh=rfP9tv07m8KPasmOo6D0Sv4vVtteEhbDo7iguTqD2lc=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=l8zq9GBg8z/baGSQC6cYYHHzlkbHXmPAYLkCPqA/z3vyGxyxG20BHWrMpNh+RK11B OASjM+GQ86R3pxjuhdg03pBa0Cn4u1hnOY3gHXWYyh/6Prsf9Jq4BFsEVPzkiIBJo8 LeMjICAt5NWUdUUzbCBKtYGu6AChEeEoC4JCdVdw= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:15 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke , Rob Herring , Krzysztof Kozlowski , Linus Walleij CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , , , , Rob Herring Subject: [PATCH RESEND v6 04/23] dt-bindings: ata: sata: Extend number of SATA ports Date: Thu, 28 Jul 2022 14:18:45 +0300 Message-ID: <20220728111905.12427-5-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org The denoted in the description upper limit only concerns the Port Multipliers, but not the actual SATA ports. It's an external device attached to a SATA port in order to access more than one SATA-drive. So when it's attached to a SATA port it just extends the port capability while the number of actual SATA ports stays the same. For instance on AHCI controllers the number of actual ports is determined by the CAP.NP field and the PI (Ports Implemented) register. AFAICS in general the maximum number of SATA ports depends on the particular controller implementation. Generic AHCI controller can't have more than 32 ports (since CAP.NP is of 5 bits wide and PI register is 32-bits size), while DWC AHCI SATA controller can't be configured with more than 8 ports activated. So let's discard the SATA ports reg-property restrictions and just make sure that it consists of a single reg-item. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke Reviewed-by: Rob Herring --- Changelog v2: - Add comma and replace "channel" with "SATA port" in the reg property description (@Damien). --- Documentation/devicetree/bindings/ata/sata-common.yaml | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml index 5a31a902618d..58c9342b9925 100644 --- a/Documentation/devicetree/bindings/ata/sata-common.yaml +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml @@ -49,10 +49,9 @@ $defs: properties: reg: minimum: 0 - maximum: 14 description: - The ID number of the drive port SATA can potentially use a port - multiplier making it possible to connect up to 15 disks to a single - SATA port. + The ID number of the SATA port. Aside with being directly used, + each port can have a Port Multiplier attached thus allowing to + access more than one drive by means of a single SATA port. ... From patchwork Thu Jul 28 11:18:46 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661580 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=sbw43WkP; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp8j4mDHz9sGC for ; Thu, 28 Jul 2022 21:20:05 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235485AbiG1LTu (ORCPT ); Thu, 28 Jul 2022 07:19:50 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47042 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235968AbiG1LTe (ORCPT ); Thu, 28 Jul 2022 07:19:34 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 9ABB667164; Thu, 28 Jul 2022 04:19:22 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id A9F1B16D3; Thu, 28 Jul 2022 14:21:41 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com A9F1B16D3 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007301; bh=mZo4KYtzSohy8PRm7hEssRzi7p5ZuYvFI8ByV0YrDcQ=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=sbw43WkPLQkmIbkUREW6wwQ1RdrhBzt87vaB22VXB4S6CbO+4O+Dmq8kfyk7nD5ER 6NRm8Gi+w99RxIv1YJ4agpKMb/0mOXAW36Yh+tfI+q11rt0K0IVo196iHDhSnM6ymR Frnx6c7joN8XdV5BGhteih1UX6o+wHP920UNU8Y0= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:16 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke , Rob Herring , Krzysztof Kozlowski , Florian Fainelli CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , , , , Rob Herring Subject: [PATCH RESEND v6 05/23] dt-bindings: ata: sata-brcm: Apply common AHCI schema Date: Thu, 28 Jul 2022 14:18:46 +0300 Message-ID: <20220728111905.12427-6-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org The Broadcom SATA controller is obviously based on the AHCI standard. The device driver uses the kernel AHCI library to work with it. Therefore we can be have a more thorough DT-bindings evaluation by referring to the AHCI-common schema instead of using the more relaxed SATA-common one. Signed-off-by: Serge Semin Reviewed-by: Florian Fainelli Reviewed-by: Rob Herring --- Changelog v4: - This is a new patch added on v4 lap of the review procedure. --- Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml index 4ee74df8e58a..fa8ebc8f243f 100644 --- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml +++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml @@ -14,7 +14,7 @@ maintainers: - Florian Fainelli allOf: - - $ref: sata-common.yaml# + - $ref: ahci-common.yaml# properties: compatible: From patchwork Thu Jul 28 11:18:47 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661573 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=DSnIkPYN; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp8K42STz9sGC for ; Thu, 28 Jul 2022 21:19:45 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236603AbiG1LTo (ORCPT ); Thu, 28 Jul 2022 07:19:44 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47224 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236209AbiG1LTZ (ORCPT ); Thu, 28 Jul 2022 07:19:25 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 4663D67167; Thu, 28 Jul 2022 04:19:23 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id BD17216D4; Thu, 28 Jul 2022 14:21:42 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com BD17216D4 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007302; bh=cwjTY+UXbYCa95/dq1KpC5+URj+jwo1L4bVykF4JcuI=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=DSnIkPYNU4qrE4k7eAwl2CMky7QwCgRh0MzmI1TGjPldyht4RMjMSpWtOdQxFa+I9 FNTgUqMt8DLyw76XL+NFDreMkdZHfOocrDJ4RDdVGiYEgYYeJVaXIMVxQV3/Gh5MGT zDb+4NsnyCZd0VG8iT1hcPzQ+AkEq0yD6IURlTvE= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:17 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 06/23] ata: libahci_platform: Convert to using platform devm-ioremap methods Date: Thu, 28 Jul 2022 14:18:47 +0300 Message-ID: <20220728111905.12427-7-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Currently the IOMEM AHCI registers space is mapped by means of the two functions invocation: platform_get_resource() is used to get the very first memory resource and devm_ioremap_resource() is called to remap that resource. Device-managed kernel API provides a handy wrapper to perform the same in single function call: devm_platform_ioremap_resource(). While at it seeing many AHCI platform drivers rely on having the AHCI CSR space marked with "ahci" name let's first try to find and remap the CSR IO-mem with that name and only if it fails fallback to getting the very first registers space platform resource. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke --- Changelog v2: - Check whether there is "ahci" reg resource before using the devm_platform_ioremap_resource_byname() method in order to prevent a false error message printed in the log (@Damien) - Slightly update the patch title due to the change above and to be more specific about what the platform device managed methods are utilized for. --- drivers/ata/libahci_platform.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 32495ae96567..1e9e825d6cc5 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -402,8 +402,14 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, devres_add(dev, hpriv); - hpriv->mmio = devm_ioremap_resource(dev, - platform_get_resource(pdev, IORESOURCE_MEM, 0)); + /* + * If the DT provided an "ahci" named resource, use it. Otherwise, + * fallback to using the default first resource for the device node. + */ + if (platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci")) + hpriv->mmio = devm_platform_ioremap_resource_byname(pdev, "ahci"); + else + hpriv->mmio = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(hpriv->mmio)) { rc = PTR_ERR(hpriv->mmio); goto err_out; From patchwork Thu Jul 28 11:18:48 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661578 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=VWRl8DK+; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp8b19Vsz9sGH for ; Thu, 28 Jul 2022 21:19:59 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235816AbiG1LTs (ORCPT ); Thu, 28 Jul 2022 07:19:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47092 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236262AbiG1LTf (ORCPT ); Thu, 28 Jul 2022 07:19:35 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 52BED67174; Thu, 28 Jul 2022 04:19:24 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id DC49116D5; Thu, 28 Jul 2022 14:21:43 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com DC49116D5 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007303; bh=MsGCYuH4hth07vE45hdKdzDWXH/lqfjSFMGO2xICtoI=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=VWRl8DK+dGzoIFHjafMIs7XRL2gUb2ZEFluFcYZFt7GANlepazpPoXKEkOY4FOOr1 PHnivhOJZsgx6TbaBDjK9jOSHUF0M5Gpbow7DpXT6zGPqjq9DCQFRHiqXjMH9FlOqB 76z5RXBPCg4ocP0sEDnfvw0KsRRVq8wAXQsLxjPM= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:18 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 07/23] ata: libahci_platform: Convert to using devm bulk clocks API Date: Thu, 28 Jul 2022 14:18:48 +0300 Message-ID: <20220728111905.12427-8-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org In order to simplify the clock-related code there is a way to convert the current fixed clocks array into using the common bulk clocks kernel API with dynamic set of the clock handlers and device-managed clock-resource tracking. It's a bit tricky due to the complication coming from the requirement to support the platforms (da850, spear13xx) with the non-OF-based clock source, but still doable. Before this modification there are two methods have been used to get the clocks connected to an AHCI device: clk_get() - to get the very first clock in the list and of_clk_get() - to get the rest of them. Basically the platforms with non-OF-based clocks definition could specify only a single reference clock source. The platforms with OF-hw clocks have been luckier and could setup up to AHCI_MAX_CLKS clocks. Such semantic can be retained with using devm_clk_bulk_get_all() to retrieve the clocks defined via the DT firmware and devm_clk_get_optional() otherwise. In both cases using the device-managed version of the methods will cause the automatic resources deallocation on the AHCI device removal event. The only complicated part in the suggested approach is the explicit allocation and initialization of the clk_bulk_data structure instance for the non-OF reference clocks. It's required in order to use the Bulk Clocks API for the both denoted cases of the clocks definition. Note aside with the clock-related code reduction and natural simplification, there are several bonuses the suggested modification provides. First of all the limitation of having no greater than AHCI_MAX_CLKS clocks is now removed, since the devm_clk_bulk_get_all() method will allocate as many reference clocks data descriptors as there are clocks specified for the device. Secondly the clock names are auto-detected. So the LLDD (glue) drivers can make sure that the required clocks are specified just by checking the clock IDs in the clk_bulk_data array. Thirdly using the handy Bulk Clocks kernel API improves the clocks-handling code readability. And the last but not least this modification implements a true optional clocks support to the ahci_platform_get_resources() method. Indeed the previous clocks getting procedure just stopped getting the clocks on any errors (aside from non-critical -EPROBE_DEFER) in a way so the callee wasn't even informed about abnormal loop termination. The new implementation lacks of such problem. The ahci_platform_get_resources() will return an error code if the corresponding clocks getting method ends execution abnormally. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke Reported-by: kernel test robot Reported-by: kernel test robot --- Changelog v2: - Convert to checking the error-case first in the devm_clk_bulk_get_all() method invocation. (@Damien) - Fix some grammar mistakes in the comments. --- drivers/ata/ahci.h | 4 +- drivers/ata/libahci_platform.c | 84 ++++++++++++++++------------------ 2 files changed, 41 insertions(+), 47 deletions(-) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index ad11a4c52fbe..c3770a19781b 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -38,7 +38,6 @@ enum { AHCI_MAX_PORTS = 32, - AHCI_MAX_CLKS = 5, AHCI_MAX_SG = 168, /* hardware max is 64K */ AHCI_DMA_BOUNDARY = 0xffffffff, AHCI_MAX_CMDS = 32, @@ -339,7 +338,8 @@ struct ahci_host_priv { u32 em_msg_type; /* EM message type */ u32 remapped_nvme; /* NVMe remapped device count */ bool got_runtime_pm; /* Did we do pm_runtime_get? */ - struct clk *clks[AHCI_MAX_CLKS]; /* Optional */ + unsigned int n_clks; + struct clk_bulk_data *clks; /* Optional */ struct reset_control *rsts; /* Optional */ struct regulator **target_pwrs; /* Optional */ struct regulator *ahci_regulator;/* Optional */ diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 1e9e825d6cc5..814804582d1d 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -8,6 +8,7 @@ * Anton Vorontsov */ +#include #include #include #include @@ -97,28 +98,14 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_phys); * ahci_platform_enable_clks - Enable platform clocks * @hpriv: host private area to store config values * - * This function enables all the clks found in hpriv->clks, starting at - * index 0. If any clk fails to enable it disables all the clks already - * enabled in reverse order, and then returns an error. + * This function enables all the clks found for the AHCI device. * * RETURNS: * 0 on success otherwise a negative error code */ int ahci_platform_enable_clks(struct ahci_host_priv *hpriv) { - int c, rc; - - for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) { - rc = clk_prepare_enable(hpriv->clks[c]); - if (rc) - goto disable_unprepare_clk; - } - return 0; - -disable_unprepare_clk: - while (--c >= 0) - clk_disable_unprepare(hpriv->clks[c]); - return rc; + return clk_bulk_prepare_enable(hpriv->n_clks, hpriv->clks); } EXPORT_SYMBOL_GPL(ahci_platform_enable_clks); @@ -126,16 +113,13 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_clks); * ahci_platform_disable_clks - Disable platform clocks * @hpriv: host private area to store config values * - * This function disables all the clks found in hpriv->clks, in reverse - * order of ahci_platform_enable_clks (starting at the end of the array). + * This function disables all the clocks enabled before + * (bulk-clocks-disable function is supposed to do that in reverse + * from the enabling procedure order). */ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv) { - int c; - - for (c = AHCI_MAX_CLKS - 1; c >= 0; c--) - if (hpriv->clks[c]) - clk_disable_unprepare(hpriv->clks[c]); + clk_bulk_disable_unprepare(hpriv->n_clks, hpriv->clks); } EXPORT_SYMBOL_GPL(ahci_platform_disable_clks); @@ -292,8 +276,6 @@ static void ahci_platform_put_resources(struct device *dev, void *res) pm_runtime_disable(dev); } - for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) - clk_put(hpriv->clks[c]); /* * The regulators are tied to child node device and not to the * SATA device itself. So we can't use devm for automatically @@ -374,8 +356,8 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port, * 1) mmio registers (IORESOURCE_MEM 0, mandatory) * 2) regulator for controlling the targets power (optional) * regulator for controlling the AHCI controller (optional) - * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node, - * or for non devicetree enabled platforms a single clock + * 3) all clocks specified in the devicetree node, or a single + * clock for non-OF platforms (optional) * 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional) * 5) phys (optional) * @@ -385,11 +367,10 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port, struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, unsigned int flags) { + int child_nodes, rc = -ENOMEM, enabled_ports = 0; struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; - struct clk *clk; struct device_node *child; - int i, enabled_ports = 0, rc = -ENOMEM, child_nodes; u32 mask_port_map = 0; if (!devres_open_group(dev, NULL, GFP_KERNEL)) @@ -415,25 +396,38 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, goto err_out; } - for (i = 0; i < AHCI_MAX_CLKS; i++) { + /* + * Bulk clocks getting procedure can fail to find any clock due to + * running on a non-OF platform or due to the clocks being defined in + * bypass of the DT firmware (like da850, spear13xx). In that case we + * fallback to getting a single clock source right from the dev clocks + * list. + */ + rc = devm_clk_bulk_get_all(dev, &hpriv->clks); + if (rc < 0) + goto err_out; + + if (rc > 0) { + /* Got clocks in bulk */ + hpriv->n_clks = rc; + } else { /* - * For now we must use clk_get(dev, NULL) for the first clock, - * because some platforms (da850, spear13xx) are not yet - * converted to use devicetree for clocks. For new platforms - * this is equivalent to of_clk_get(dev->of_node, 0). + * No clock bulk found: fallback to manually getting + * the optional clock. */ - if (i == 0) - clk = clk_get(dev, NULL); - else - clk = of_clk_get(dev->of_node, i); - - if (IS_ERR(clk)) { - rc = PTR_ERR(clk); - if (rc == -EPROBE_DEFER) - goto err_out; - break; + hpriv->clks = devm_kzalloc(dev, sizeof(*hpriv->clks), GFP_KERNEL); + if (!hpriv->clks) { + rc = -ENOMEM; + goto err_out; + } + hpriv->clks->clk = devm_clk_get_optional(dev, NULL); + if (IS_ERR(hpriv->clks->clk)) { + rc = PTR_ERR(hpriv->clks->clk); + goto err_out; + } else if (hpriv->clks->clk) { + hpriv->clks->id = __clk_get_name(hpriv->clks->clk); + hpriv->n_clks = 1; } - hpriv->clks[i] = clk; } hpriv->ahci_regulator = devm_regulator_get(dev, "ahci"); From patchwork Thu Jul 28 11:18:49 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661574 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=kLSAmc+y; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp8P0JX8z9sGC for ; Thu, 28 Jul 2022 21:19:49 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236715AbiG1LTp (ORCPT ); Thu, 28 Jul 2022 07:19:45 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47306 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236320AbiG1LT1 (ORCPT ); Thu, 28 Jul 2022 07:19:27 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id BD56167147; Thu, 28 Jul 2022 04:19:25 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id E155016D6; Thu, 28 Jul 2022 14:21:44 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com E155016D6 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007304; bh=1w09WlHzsLJJ1Iix44RngaZfNGmBziRoxLwbJ26Cixk=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=kLSAmc+yjNXSwxWpbEN0Nr1dX7jm2RcuY+N2ZzlXcO6EvuPY/HIDzcqWHWVyPiQLQ d64BvrIfZzZvR6v8TAovI4QlKH4McnGeqFfvVzZ4wPFHHUw8Ui74xV10qx/b1ss+Cj kaYbRqrAkSjQOIor0WpfnrXc1t9laQw8GW22DAN4= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:19 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 08/23] ata: libahci_platform: Sanity check the DT child nodes number Date: Thu, 28 Jul 2022 14:18:49 +0300 Message-ID: <20220728111905.12427-9-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Having greater than AHCI_MAX_PORTS (32) ports detected isn't that critical from the further AHCI-platform initialization point of view since exceeding the ports upper limit will cause allocating more resources than will be used afterwards. But detecting too many child DT-nodes doesn't seem right since it's very unlikely to have it on an ordinary platform. In accordance with the AHCI specification there can't be more than 32 ports implemented at least due to having the CAP.NP field of 5 bits wide and the PI register of dword size. Thus if such situation is found the DTB must have been corrupted and the data read from it shouldn't be reliable. Let's consider that as an erroneous situation and halt further resources allocation. Note it's logically more correct to have the nports set only after the initialization value is checked for being sane. So while at it let's make sure nports is assigned with a correct value. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke --- Changelog v2: - Drop the else word from the child_nodes value checking if-else-if statement (@Damien) and convert the after-else part into the ternary operator-based statement. Changelog v4: - Fix some logical mistakes in the patch log. (@Sergei Shtylyov) - Replace "?:" operator with if-else statement. (@Damien) --- drivers/ata/libahci_platform.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 814804582d1d..579039956917 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -451,14 +451,24 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, } } - hpriv->nports = child_nodes = of_get_child_count(dev->of_node); + /* + * Too many sub-nodes most likely means having something wrong with + * the firmware. + */ + child_nodes = of_get_child_count(dev->of_node); + if (child_nodes > AHCI_MAX_PORTS) { + rc = -EINVAL; + goto err_out; + } /* * If no sub-node was found, we still need to set nports to * one in order to be able to use the * ahci_platform_[en|dis]able_[phys|regulators] functions. */ - if (!child_nodes) + if (child_nodes) + hpriv->nports = child_nodes; + else hpriv->nports = 1; hpriv->phys = devm_kcalloc(dev, hpriv->nports, sizeof(*hpriv->phys), GFP_KERNEL); From patchwork Thu Jul 28 11:18:50 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661585 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=df3MQX0s; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp9d0hlHz9sGC for ; Thu, 28 Jul 2022 21:20:53 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236262AbiG1LUs (ORCPT ); Thu, 28 Jul 2022 07:20:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47166 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235989AbiG1LTs (ORCPT ); Thu, 28 Jul 2022 07:19:48 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 628F667162; Thu, 28 Jul 2022 04:19:26 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 3F00A16D7; Thu, 28 Jul 2022 14:21:46 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 3F00A16D7 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007306; bh=PN5otZtaF9CvsvN8xDg4hfI27Py58tK5oPBqkl4So5E=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=df3MQX0szmnTC5vPaNKeLMR/BD2BT4LyJLZaqnji8/ECQ/Un3K9mPnMU0YuYOfhI4 AxA0X41TPAmQZovd6xDmM+E7e78tEeJhWopFCNtOV3JK5HGBfnK5P+DCNOh1SkX0GX 9pNs7rgIlmFdRFSMNQHJimXxsgow5mrsphbx2/GQ= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:21 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke , Matthias Brugger , Patrice Chotard CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , , , Subject: [PATCH RESEND v6 09/23] ata: libahci_platform: Parse ports-implemented property in resources getter Date: Thu, 28 Jul 2022 14:18:50 +0300 Message-ID: <20220728111905.12427-10-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org The ports-implemented property is mainly used on the OF-based platforms with no ports mapping initialized by a bootloader/BIOS firmware. Seeing the same of_property_read_u32()-based pattern has already been implemented in the generic AHCI LLDD (glue) driver and in the Mediatek, St AHCI drivers let's move the property read procedure to the generic ahci_platform_get_resources() method. Thus we'll have the forced ports mapping feature supported for each OF-based platform which requires that, and stop re-implementing the same pattern in there a bit simplifying the code. Signed-off-by: Serge Semin --- drivers/ata/ahci_mtk.c | 2 -- drivers/ata/ahci_platform.c | 3 --- drivers/ata/ahci_st.c | 3 --- drivers/ata/libahci_platform.c | 3 +++ 4 files changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/ata/ahci_mtk.c b/drivers/ata/ahci_mtk.c index 1f6c85fde983..c056378e3e72 100644 --- a/drivers/ata/ahci_mtk.c +++ b/drivers/ata/ahci_mtk.c @@ -118,8 +118,6 @@ static int mtk_ahci_parse_property(struct ahci_host_priv *hpriv, SYS_CFG_SATA_EN); } - of_property_read_u32(np, "ports-implemented", &hpriv->force_port_map); - return 0; } diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 28a8de5b48b9..9b56490ecbc3 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -56,9 +56,6 @@ static int ahci_probe(struct platform_device *pdev) if (rc) return rc; - of_property_read_u32(dev->of_node, - "ports-implemented", &hpriv->force_port_map); - if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci")) hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ; diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c index 7526653c843b..068621099c00 100644 --- a/drivers/ata/ahci_st.c +++ b/drivers/ata/ahci_st.c @@ -168,9 +168,6 @@ static int st_ahci_probe(struct platform_device *pdev) st_ahci_configure_oob(hpriv->mmio); - of_property_read_u32(dev->of_node, - "ports-implemented", &hpriv->force_port_map); - err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info, &ahci_platform_sht); if (err) { diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 579039956917..02171ac02306 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -486,6 +486,9 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, goto err_out; } + of_property_read_u32(dev->of_node, + "ports-implemented", &hpriv->force_port_map); + if (child_nodes) { for_each_child_of_node(dev->of_node, child) { u32 port; From patchwork Thu Jul 28 11:18:51 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661582 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=J2IluU1U; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp8r0FXsz9sGC for ; Thu, 28 Jul 2022 21:20:12 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236393AbiG1LUJ (ORCPT ); Thu, 28 Jul 2022 07:20:09 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47872 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236421AbiG1LTn (ORCPT ); Thu, 28 Jul 2022 07:19:43 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 70CD06758B; Thu, 28 Jul 2022 04:19:27 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 7227516CF; Thu, 28 Jul 2022 14:21:47 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 7227516CF DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007307; bh=aicq5WZkU06Vj5hyUoBdHI43ha7pSeP4vsCz46tIZJ4=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=J2IluU1UswE7M+98FKbgajwhQccs//UXvbcQ3/icSsfQbTh1jK8Y0ZfPd7hECnQc+ 6/Vsl9wrQmc0WUfco72D+0jypcQdOaCskdAcV6phNwMAuZ/tJnip3rSo+EAw1LbkTG Z4JnckohQsin60CuTrcmxfBpT5DD0/y0gqVGePBc= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:22 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 10/23] ata: libahci_platform: Introduce reset assertion/deassertion methods Date: Thu, 28 Jul 2022 14:18:51 +0300 Message-ID: <20220728111905.12427-11-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Currently the ACHI-platform library supports only the assert and deassert reset signals and ignores the platforms with self-deasserting reset lines. That prone to having the platforms with self-deasserting reset method misbehaviour when it comes to resuming from sleep state after the clocks have been fully disabled. For such cases the controller needs to be fully reset all over after the reference clocks are enabled and stable, otherwise the controller state machine might be in an undetermined state. The best solution would be to auto-detect which reset method is supported by the particular platform and use it implicitly in the framework of the ahci_platform_enable_resources()/ahci_platform_disable_resources() methods. Alas it can't be implemented due to the AHCI-platform library already supporting the shared reset control lines. As [1] says in such case we have to use only one of the next methods: + reset_control_assert()/reset_control_deassert(); + reset_control_reset()/reset_control_rearm(). If the driver had an exclusive control over the reset lines we could have been able to manipulate the lines with no much limitation and just used the combination of the methods above to cover all the possible reset-control cases. Since the shared reset control has already been advertised and couldn't be changed with no risk to breaking the platforms relying on it, we have no choice but to make the platform drivers to determine which reset methods the platform reset system supports. In order to implement both types of reset control support we suggest to introduce the new AHCI-platform flag: AHCI_PLATFORM_RST_TRIGGER, which when passed to the ahci_platform_get_resources() method together with the AHCI_PLATFORM_GET_RESETS flag will indicate that the reset lines are self-deasserting thus the reset_control_reset()/reset_control_rearm() will be used to control the reset state. Otherwise the reset_control_deassert()/reset_control_assert() methods will be utilized. [1] Documentation/driver-api/reset.rst Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke --- Changelog v2: - Convert the ahci_platform_assert_rsts() method to returning int status (@Damien). - Fix some grammar mistakes in the ahci_platform_deassert_rsts() doc (@Damien). --- drivers/ata/ahci.h | 1 + drivers/ata/libahci_platform.c | 50 ++++++++++++++++++++++++++++++---- include/linux/ahci_platform.h | 5 +++- 3 files changed, 50 insertions(+), 6 deletions(-) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index c3770a19781b..7d834deefeb9 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -340,6 +340,7 @@ struct ahci_host_priv { bool got_runtime_pm; /* Did we do pm_runtime_get? */ unsigned int n_clks; struct clk_bulk_data *clks; /* Optional */ + unsigned int f_rsts; struct reset_control *rsts; /* Optional */ struct regulator **target_pwrs; /* Optional */ struct regulator *ahci_regulator;/* Optional */ diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 02171ac02306..307908a0d69d 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -123,6 +123,44 @@ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv) } EXPORT_SYMBOL_GPL(ahci_platform_disable_clks); +/** + * ahci_platform_deassert_rsts - Deassert/trigger platform resets + * @hpriv: host private area to store config values + * + * This function deasserts or triggers all the reset lines found for + * the AHCI device. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_deassert_rsts(struct ahci_host_priv *hpriv) +{ + if (hpriv->f_rsts & AHCI_PLATFORM_RST_TRIGGER) + return reset_control_reset(hpriv->rsts); + + return reset_control_deassert(hpriv->rsts); +} +EXPORT_SYMBOL_GPL(ahci_platform_deassert_rsts); + +/** + * ahci_platform_assert_rsts - Assert/rearm platform resets + * @hpriv: host private area to store config values + * + * This function asserts or rearms (for self-deasserting resets) all + * the reset controls found for the AHCI device. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_assert_rsts(struct ahci_host_priv *hpriv) +{ + if (hpriv->f_rsts & AHCI_PLATFORM_RST_TRIGGER) + return reset_control_rearm(hpriv->rsts); + + return reset_control_assert(hpriv->rsts); +} +EXPORT_SYMBOL_GPL(ahci_platform_assert_rsts); + /** * ahci_platform_enable_regulators - Enable regulators * @hpriv: host private area to store config values @@ -220,18 +258,18 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) if (rc) goto disable_regulator; - rc = reset_control_deassert(hpriv->rsts); + rc = ahci_platform_deassert_rsts(hpriv); if (rc) goto disable_clks; rc = ahci_platform_enable_phys(hpriv); if (rc) - goto disable_resets; + goto disable_rsts; return 0; -disable_resets: - reset_control_assert(hpriv->rsts); +disable_rsts: + ahci_platform_assert_rsts(hpriv); disable_clks: ahci_platform_disable_clks(hpriv); @@ -258,7 +296,7 @@ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) { ahci_platform_disable_phys(hpriv); - reset_control_assert(hpriv->rsts); + ahci_platform_assert_rsts(hpriv); ahci_platform_disable_clks(hpriv); @@ -449,6 +487,8 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, rc = PTR_ERR(hpriv->rsts); goto err_out; } + + hpriv->f_rsts = flags & AHCI_PLATFORM_RST_TRIGGER; } /* diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h index 49e5383d4222..6d7dd472d370 100644 --- a/include/linux/ahci_platform.h +++ b/include/linux/ahci_platform.h @@ -23,6 +23,8 @@ int ahci_platform_enable_phys(struct ahci_host_priv *hpriv); void ahci_platform_disable_phys(struct ahci_host_priv *hpriv); int ahci_platform_enable_clks(struct ahci_host_priv *hpriv); void ahci_platform_disable_clks(struct ahci_host_priv *hpriv); +int ahci_platform_deassert_rsts(struct ahci_host_priv *hpriv); +int ahci_platform_assert_rsts(struct ahci_host_priv *hpriv); int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv); void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv); int ahci_platform_enable_resources(struct ahci_host_priv *hpriv); @@ -41,6 +43,7 @@ int ahci_platform_resume_host(struct device *dev); int ahci_platform_suspend(struct device *dev); int ahci_platform_resume(struct device *dev); -#define AHCI_PLATFORM_GET_RESETS 0x01 +#define AHCI_PLATFORM_GET_RESETS BIT(0) +#define AHCI_PLATFORM_RST_TRIGGER BIT(1) #endif /* _AHCI_PLATFORM_H */ From patchwork Thu Jul 28 11:18:52 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661588 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=K9pGcQQa; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LtpBH1SBwz9sGC for ; Thu, 28 Jul 2022 21:21:27 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236715AbiG1LVW (ORCPT ); Thu, 28 Jul 2022 07:21:22 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47306 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236005AbiG1LTs (ORCPT ); Thu, 28 Jul 2022 07:19:48 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id B41066759F; Thu, 28 Jul 2022 04:19:28 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id DA78E16CC; Thu, 28 Jul 2022 14:21:48 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com DA78E16CC DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007308; bh=GmRmzWevY9P0garDpWjcm8TYUHRVAknKpAHcK4Qdzts=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=K9pGcQQaG8IWryN/fxPebNyI1YUEOcErAObxCCus43hHo+qmu17S/lW6DSVlA+28s QWVFQphVsCgU88ykvliWtq5RaKQwpmd57smWhaVgXVajEdt3OKy5/mH/ZJ0/c3drao Xjsy5KKeQfy8Bb0MjyP1xBkHQfU1UM6kESRLBpus= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:23 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke , Rob Herring , Krzysztof Kozlowski CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , , , , Rob Herring Subject: [PATCH RESEND v6 11/23] dt-bindings: ata: ahci: Add platform capability properties Date: Thu, 28 Jul 2022 14:18:52 +0300 Message-ID: <20220728111905.12427-12-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org In case if the platform doesn't have BIOS or a comprehensive firmware installed then the HBA capability flags will be left uninitialized. As a good alternative we suggest to define the DT-properties with the AHCI platform capabilities describing all the HW-init flags of the corresponding capability register. Luckily there aren't too many of them. SSS - Staggered Spin-up support and MPS - Mechanical Presence Switch support determine the corresponding feature availability for the whole HBA by means of the "hba-cap" property. Each port can have the "hba-port-cap" property initialized indicating that the port supports some of the next functionalities: HPCP - HotPlug capable port, MPSP - Mechanical Presence Switch attached to a port, CPD - Cold Plug detection, ESP - External SATA Port (eSATA), FBSCP - FIS-based switching capable port. Signed-off-by: Serge Semin Reviewed-by: Rob Herring --- Changelog v4: - Fix some misspelling in the patch log. - Convert the boolean properties to the bitfield properties. (@Rob) - Remove Hannes' rb tag due to the patch content change. Changelog v5: - Dual-licese the include/dt-bindings/ata/ahci.h file. (@Rob) --- .../devicetree/bindings/ata/ahci-common.yaml | 16 +++++++++++++++ .../bindings/ata/ahci-platform.yaml | 10 ++++++++++ include/dt-bindings/ata/ahci.h | 20 +++++++++++++++++++ 3 files changed, 46 insertions(+) create mode 100644 include/dt-bindings/ata/ahci.h diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml index 12a97b56226f..94d72aeaad0f 100644 --- a/Documentation/devicetree/bindings/ata/ahci-common.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml @@ -58,6 +58,14 @@ properties: phy-names: const: sata-phy + hba-cap: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + Bitfield of the HBA generic platform capabilities like Staggered + Spin-up or Mechanical Presence Switch support. It can be used to + appropriately initialize the HWinit fields of the HBA CAP register + in case if the system firmware hasn't done it. + ports-implemented: $ref: '/schemas/types.yaml#/definitions/uint32' description: @@ -101,6 +109,14 @@ $defs: target-supply: description: Power regulator for SATA port target device + hba-port-cap: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + Bitfield of the HBA port-specific platform capabilities like Hot + plugging, eSATA, FIS-based Switching, etc (see AHCI specification + for details). It can be used to initialize the HWinit fields of + the PxCMD register in case if the system firmware hasn't done it. + required: - reg diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml index 15be98e0385b..e19cf9828e68 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml @@ -111,6 +111,8 @@ examples: - | #include #include + #include + sata@f7e90000 { compatible = "marvell,berlin2q-ahci", "generic-ahci"; reg = <0xf7e90000 0x1000>; @@ -119,15 +121,23 @@ examples: #address-cells = <1>; #size-cells = <0>; + hba-cap = ; + sata0: sata-port@0 { reg = <0>; + phys = <&sata_phy 0>; target-supply = <®_sata0>; + + hba-port-cap = <(HBA_PORT_FBSCP | HBA_PORT_ESP)>; }; sata1: sata-port@1 { reg = <1>; + phys = <&sata_phy 1>; target-supply = <®_sata1>; + + hba-port-cap = <(HBA_PORT_HPCP | HBA_PORT_MPSP | HBA_PORT_FBSCP)>; }; }; diff --git a/include/dt-bindings/ata/ahci.h b/include/dt-bindings/ata/ahci.h new file mode 100644 index 000000000000..77997b35612c --- /dev/null +++ b/include/dt-bindings/ata/ahci.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause */ +/* + * This header provides constants for most AHCI bindings. + */ + +#ifndef _DT_BINDINGS_ATA_AHCI_H +#define _DT_BINDINGS_ATA_AHCI_H + +/* Host Bus Adapter generic platform capabilities */ +#define HBA_SSS (1 << 27) +#define HBA_SMPS (1 << 28) + +/* Host Bus Adapter port-specific platform capabilities */ +#define HBA_PORT_HPCP (1 << 18) +#define HBA_PORT_MPSP (1 << 19) +#define HBA_PORT_CPD (1 << 20) +#define HBA_PORT_ESP (1 << 21) +#define HBA_PORT_FBSCP (1 << 22) + +#endif From patchwork Thu Jul 28 11:18:53 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661583 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=Mw1zg8OW; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp921Yyyz9sGC for ; Thu, 28 Jul 2022 21:20:22 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236528AbiG1LUR (ORCPT ); Thu, 28 Jul 2022 07:20:17 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47896 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236473AbiG1LTo (ORCPT ); Thu, 28 Jul 2022 07:19:44 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 610CC6714F; Thu, 28 Jul 2022 04:19:29 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id DF99016D0; Thu, 28 Jul 2022 14:21:49 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com DF99016D0 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007309; bh=n0UYMJA4c61I8XbWDiUPzKG7qhzI+vK46N6KQLIsBoA=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=Mw1zg8OWcbl7EZhdGfvmwL1GOCkUM19qb91Go+72uXn0PhlEjX2zjaKaxl+kABh9g VOwhDKcg8rhgbOX3AOM7V4ZcGuOiSqpEkRhMwzEx838sC6yvefR0Oj4u9iz6dIzjlD +Xwkjl8+wePySjpjeO6/Nwn0kQ+7JLPoDckKG4Ug= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:24 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 12/23] ata: libahci: Extend port-cmd flags set with port capabilities Date: Thu, 28 Jul 2022 14:18:53 +0300 Message-ID: <20220728111905.12427-13-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Currently not all of the Port-specific capabilities listed in the PORT_CMD-enumeration. Let's extend that set with the Cold Presence Detection and Mechanical Presence Switch attached to the Port flags [1] so to closeup the set of the platform-specific port-capabilities flags. Note these flags are supposed to be set by the platform firmware if there is one. Alternatively as we are about to do they can be set by means of the OF properties. While at it replace PORT_IRQ_DEV_ILCK with PORT_IRQ_DMPS and fix the comment there. In accordance with [2] that IRQ flag is supposed to indicate the state of the signal coming from the Mechanical Presence Switch. [1] Serial ATA AHCI 1.3.1 Specification, p.27 [2] Serial ATA AHCI 1.3.1 Specification, p.24, p.88 Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke --- Changelog v4: - Fix the DMPS macros name in the patch log. (@Sergei Shtylyov) Changelog v5: - Add a comment regarding the PORT_CMD_CAP enum entity purpose. (@Damien) --- drivers/ata/ahci.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 7d834deefeb9..27cab4e909a5 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -138,7 +138,7 @@ enum { PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ - PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ + PORT_IRQ_DMPS = (1 << 7), /* mechanical presence status */ PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ @@ -166,6 +166,8 @@ enum { PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */ PORT_CMD_ESP = (1 << 21), /* External Sata Port */ + PORT_CMD_CPD = (1 << 20), /* Cold Presence Detection */ + PORT_CMD_MPSP = (1 << 19), /* Mechanical Presence Switch */ PORT_CMD_HPCP = (1 << 18), /* HotPlug Capable Port */ PORT_CMD_PMP = (1 << 17), /* PMP attached */ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ @@ -181,6 +183,10 @@ enum { PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ + /* PORT_CMD capabilities mask */ + PORT_CMD_CAP = PORT_CMD_HPCP | PORT_CMD_MPSP | + PORT_CMD_CPD | PORT_CMD_ESP | PORT_CMD_FBSCP, + /* PORT_FBS bits */ PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */ PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */ From patchwork Thu Jul 28 11:18:54 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661590 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=kwm3KiyA; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LtpBK6Wbkz9sGC for ; Thu, 28 Jul 2022 21:21:29 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237018AbiG1LVX (ORCPT ); Thu, 28 Jul 2022 07:21:23 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47042 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236067AbiG1LTs (ORCPT ); Thu, 28 Jul 2022 07:19:48 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 5467567589; Thu, 28 Jul 2022 04:19:30 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 36F9116D1; Thu, 28 Jul 2022 14:21:51 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 36F9116D1 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007311; bh=6quWTjpWV5I5nvvlfLaHvQO0AsMBbCA9KCjJzXHXt+k=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=kwm3KiyAg/CEg8WJUGsN+C5wmENR8vIRhoI82KFVLMZ1B3P974dFVV2NWKkQDSipn 0q9U62yu6dRBJMLyvB4zWUQhXocAH0IAjLph4Pkr0PcdzmeuKE+xpr6FnOctHZjfLC ba/YzWgbdEgeCzQ/dI5DWRW4rebu7QYmySLzPR0E= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:26 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 13/23] ata: libahci: Discard redundant force_port_map parameter Date: Thu, 28 Jul 2022 14:18:54 +0300 Message-ID: <20220728111905.12427-14-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Currently there are four port-map-related fields declared in the ahci_host_priv structure and used to setup the HBA ports mapping. First the ports-mapping is read from the PI register and immediately stored in the saved_port_map field. If forced_port_map is initialized with non-zero value then its value will have greater priority over the value read from PI, thus it will override the saved_port_map field. That value will be then masked by a non-zero mask_port_map field and after some sanity checks it will be stored in the ahci_host_priv.port_map field as a final port mapping. As you can see the logic is a bit too complicated for such a simple task. We can freely get rid from at least one of the fields with no change to the implemented semantic. The force_port_map field can be replaced with taking non-zero saved_port_map value into account. So if saved_port_map is pre-initialized by the low level drivers (platform drivers) then it will have greater priority over the value read from PI register and will be used as actual HBA ports mapping later on. Thus the ports map forcing task will be just transferred from force_port_map to the saved_port_map field. This modification will perfectly fit into the feature of having OF-based initialization of the HW-init HBA CSR fields we are about to introduce in the next commit. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke --- drivers/ata/ahci.c | 2 +- drivers/ata/ahci.h | 1 - drivers/ata/libahci.c | 10 ++++++---- drivers/ata/libahci_platform.c | 2 +- 4 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c1eca72b4575..bacb597a0d32 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -657,7 +657,7 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev, { if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { dev_info(&pdev->dev, "JMB361 has only one port\n"); - hpriv->force_port_map = 1; + hpriv->saved_port_map = 1; } /* diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 27cab4e909a5..cc4f40e6c924 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -328,7 +328,6 @@ struct ahci_port_priv { struct ahci_host_priv { /* Input fields */ unsigned int flags; /* AHCI_HFLAG_* */ - u32 force_port_map; /* force port map */ u32 mask_port_map; /* mask out particular bits */ void __iomem * mmio; /* bus-independent mem map */ diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index cf8c7fd59ada..000a7072614f 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -453,7 +453,6 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) * reset. Values without are used for driver operation. */ hpriv->saved_cap = cap = readl(mmio + HOST_CAP); - hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); /* CAP2 register is only defined for AHCI 1.2 and later */ vers = readl(mmio + HOST_VERSION); @@ -517,10 +516,13 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) cap &= ~HOST_CAP_SXS; } - if (hpriv->force_port_map && port_map != hpriv->force_port_map) { + /* Override the HBA ports mapping if the platform needs it */ + port_map = readl(mmio + HOST_PORTS_IMPL); + if (hpriv->saved_port_map && port_map != hpriv->saved_port_map) { dev_info(dev, "forcing port_map 0x%x -> 0x%x\n", - port_map, hpriv->force_port_map); - port_map = hpriv->force_port_map; + port_map, hpriv->saved_port_map); + port_map = hpriv->saved_port_map; + } else { hpriv->saved_port_map = port_map; } diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 307908a0d69d..691737b1a5ba 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -527,7 +527,7 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, } of_property_read_u32(dev->of_node, - "ports-implemented", &hpriv->force_port_map); + "ports-implemented", &hpriv->saved_port_map); if (child_nodes) { for_each_child_of_node(dev->of_node, child) { From patchwork Thu Jul 28 11:18:55 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661584 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=cEFIOHNE; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp9K1pHQz9sGC for ; Thu, 28 Jul 2022 21:20:37 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236911AbiG1LUd (ORCPT ); Thu, 28 Jul 2022 07:20:33 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47924 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236690AbiG1LTp (ORCPT ); Thu, 28 Jul 2022 07:19:45 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id B06EE67C86; Thu, 28 Jul 2022 04:19:31 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 2BD5F16D2; Thu, 28 Jul 2022 14:21:52 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 2BD5F16D2 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007312; bh=DbC4FemQLlfeBdKJ7tWncqFJzy1ocACCRibfynjYwek=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=cEFIOHNE9vO16MkuzA/p/GNpt14YJataxWS5h4RzFfyCbrhCeXFCkeuzLJW4r7KCi R+wjlZnW3KRO8ANMAJwnnwzoPq49cM7JBOqoDBe1XiEzDE02WD97vDlxb12YOKTJo/ X/3O7BeE+DAJaXbOVxI9T8GUDM2tZ6f/9crWwUw4= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:27 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 14/23] ata: libahci: Don't read AHCI version twice in the save-config method Date: Thu, 28 Jul 2022 14:18:55 +0300 Message-ID: <20220728111905.12427-15-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org There is no point in reading the AHCI version all over in the tail of the ahci_save_initial_config() method. That register is RO and doesn't change its value even after reset. So just reuse the data, which has already been read from there earlier in the head of the function. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke --- drivers/ata/libahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 000a7072614f..1ffaa5f5f21a 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -564,7 +564,7 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) /* record values to use during operation */ hpriv->cap = cap; hpriv->cap2 = cap2; - hpriv->version = readl(mmio + HOST_VERSION); + hpriv->version = vers; hpriv->port_map = port_map; if (!hpriv->start_engine) From patchwork Thu Jul 28 11:18:56 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661587 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=mD6brgMi; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp9n3XlGz9sGC for ; Thu, 28 Jul 2022 21:21:01 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236998AbiG1LUu (ORCPT ); Thu, 28 Jul 2022 07:20:50 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47926 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235803AbiG1LTs (ORCPT ); Thu, 28 Jul 2022 07:19:48 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id D90A067C88; Thu, 28 Jul 2022 04:19:31 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 5F5C716D3; Thu, 28 Jul 2022 14:21:53 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 5F5C716D3 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007313; bh=ygMX+bu6gc/yMuo4QKjk1bUpr5VLHBbRrZJps6eSGfc=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=mD6brgMiUNOdvxnpCVROBRRnHXWNhZpxZp+6N+umPslZM0lu3IEe+xsT1wTephkJ3 vFtKrf/Dj99EJXRlQC+DqL0qpivZtTA3gbgoPpCE1va3H76g5rsWeH13CFhfxbVsDm JOUl7eQfqiIqFuUQwpD5ZeGgyoWlwdtzK3atFpD8= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:28 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 15/23] ata: ahci: Convert __ahci_port_base to accepting hpriv as arguments Date: Thu, 28 Jul 2022 14:18:56 +0300 Message-ID: <20220728111905.12427-16-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org The port base address may be required even before the ata_host instance is initialized and activated, for instance in the ahci_save_initial_config() method which we are about to update (consider this modification as a preparation for that one). Seeing the __ahci_port_base() function isn't used much it's the best candidate to provide the required functionality. So let's convert it to accepting the ahci_host_priv structure pointer. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke --- Changelog v5: - Fix some grammar notes in the patchlog. (@Damien) --- drivers/ata/ahci.c | 2 +- drivers/ata/ahci.h | 7 ++++--- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index bacb597a0d32..51c0c1dd91ea 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -690,7 +690,7 @@ static void ahci_pci_init_controller(struct ata_host *host) mv = 2; else mv = 4; - port_mmio = __ahci_port_base(host, mv); + port_mmio = __ahci_port_base(hpriv, mv); writel(0, port_mmio + PORT_IRQ_MASK); diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index cc4f40e6c924..5d9db5e7476c 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -432,10 +432,9 @@ int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht); void ahci_error_handler(struct ata_port *ap); u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked); -static inline void __iomem *__ahci_port_base(struct ata_host *host, +static inline void __iomem *__ahci_port_base(struct ahci_host_priv *hpriv, unsigned int port_no) { - struct ahci_host_priv *hpriv = host->private_data; void __iomem *mmio = hpriv->mmio; return mmio + 0x100 + (port_no * 0x80); @@ -443,7 +442,9 @@ static inline void __iomem *__ahci_port_base(struct ata_host *host, static inline void __iomem *ahci_port_base(struct ata_port *ap) { - return __ahci_port_base(ap->host, ap->port_no); + struct ahci_host_priv *hpriv = ap->host->private_data; + + return __ahci_port_base(hpriv, ap->port_no); } static inline int ahci_nr_ports(u32 cap) From patchwork Thu Jul 28 11:18:57 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661586 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=o2FnrVDg; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Ltp9h5pPgz9sGC for ; Thu, 28 Jul 2022 21:20:56 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236821AbiG1LUt (ORCPT ); Thu, 28 Jul 2022 07:20:49 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47852 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236582AbiG1LTp (ORCPT ); Thu, 28 Jul 2022 07:19:45 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id D51CF67C8C; Thu, 28 Jul 2022 04:19:32 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 9C83E16CF; Thu, 28 Jul 2022 14:21:54 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 9C83E16CF DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007314; bh=JnUgRTxaWMt2bqHjF0585wRxoQWXDWOn+MJiWnuDwRE=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=o2FnrVDgISZyHWWoc4GCbvkUuWuehrNCSAIDRsAR3whmmTJTyRCk/BMWACX64LZHD j+o3bSdler2rhCGvNufIcSPIa3N5H15Y3MC9SyY9mu1sag81dcsCfuSuo3SwkDEfy5 naHTf4Mat2d5n83Cl3S+5sylWKj/PcizOoDv2PLw= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:29 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 16/23] ata: ahci: Introduce firmware-specific caps initialization Date: Thu, 28 Jul 2022 14:18:57 +0300 Message-ID: <20220728111905.12427-17-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org There are systems with no BIOS or comprehensive embedded firmware which could be able to properly initialize the SATA AHCI controller platform-specific capabilities. In that case a good alternative to having a clever bootloader is to create a device tree node with the properties well describing all the AHCI-related platform specifics. All the settings which are normally detected and marked as available in the HBA and its ports capabilities fields [1] could be defined in the platform DTB by means of a set of the dedicated properties. Such approach perfectly fits to the DTB-philosophy - to provide hardware/platform description. So here we suggest to extend the SATA AHCI device tree bindings with two additional DT-properties: 1) "hba-cap" - HBA platform generic capabilities like: - SSS - Staggered Spin-up support. - SMPS - Mechanical Presence Switch support. 2) "hba-port-cap" - HBA platform port capabilities like: - HPCP - Hot Plug Capable Port. - MPSP - Mechanical Presence Switch Attached to Port. - CPD - Cold Presence Detection. - ESP - External SATA Port. - FBSCP - FIS-based Switching Capable Port. All of these capabilities require to have a corresponding hardware configuration. Thus it's ok to have them defined in DTB. Even though the driver currently takes into account the state of the ESP and FBSCP flags state only, there is nothing wrong with having all of them supported by the generic AHCI library in order to have a complete OF-based platform-capabilities initialization procedure. These properties will be parsed in the ahci_platform_get_resources() method and their values will be stored in the saved_* fields of the ahci_host_priv structure, which in its turn then will be used to restore the H.CAP, H.PI and P#.CMD capability fields on device init and after HBA reset. Please note this modification concerns the HW-init HBA and its ports flags only, which are by specification [1] are supposed to be initialized by the BIOS/platform firmware/expansion ROM and which are normally declared in the one-time-writable-after-reset register fields. Even though these flags aren't supposed to be cleared after HBA reset some AHCI instances may violate that rule so we still need to perform the fields resetting after each reset. Luckily the corresponding functionality has already been partly implemented in the framework of the ahci_save_initial_config() and ahci_restore_initial_config() methods. [1] Serial ATA AHCI 1.3.1 Specification, p. 103 Signed-off-by: Serge Semin --- Changelog v4: - Convert the boolean properties to the bitfield DT-properties. (@Rob) Changelog v5: - Drop white line modification. (@Damien) --- drivers/ata/ahci.h | 1 + drivers/ata/libahci.c | 51 ++++++++++++++++++++++++++++------ drivers/ata/libahci_platform.c | 40 ++++++++++++++++++++++++-- 3 files changed, 81 insertions(+), 11 deletions(-) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 5d9db5e7476c..da7ee8bec165 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -338,6 +338,7 @@ struct ahci_host_priv { u32 saved_cap; /* saved initial cap */ u32 saved_cap2; /* saved initial cap2 */ u32 saved_port_map; /* saved initial port_map */ + u32 saved_port_cap[AHCI_MAX_PORTS]; /* saved port_cap */ u32 em_loc; /* enclosure management location */ u32 em_buf_sz; /* EM buffer size in byte */ u32 em_msg_type; /* EM message type */ diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 1ffaa5f5f21a..954386a2b500 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -16,6 +16,7 @@ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf */ +#include #include #include #include @@ -443,16 +444,28 @@ static ssize_t ahci_show_em_supported(struct device *dev, void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) { void __iomem *mmio = hpriv->mmio; - u32 cap, cap2, vers, port_map; + void __iomem *port_mmio; + unsigned long port_map; + u32 cap, cap2, vers; int i; /* make sure AHCI mode is enabled before accessing CAP */ ahci_enable_ahci(mmio); - /* Values prefixed with saved_ are written back to host after - * reset. Values without are used for driver operation. + /* + * Values prefixed with saved_ are written back to the HBA and ports + * registers after reset. Values without are used for driver operation. + */ + + /* + * Override HW-init HBA capability fields with the platform-specific + * values. The rest of the HBA capabilities are defined as Read-only + * and can't be modified in CSR anyway. */ - hpriv->saved_cap = cap = readl(mmio + HOST_CAP); + cap = readl(mmio + HOST_CAP); + if (hpriv->saved_cap) + cap = (cap & ~(HOST_CAP_SSS | HOST_CAP_MPS)) | hpriv->saved_cap; + hpriv->saved_cap = cap; /* CAP2 register is only defined for AHCI 1.2 and later */ vers = readl(mmio + HOST_VERSION); @@ -519,7 +532,7 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) /* Override the HBA ports mapping if the platform needs it */ port_map = readl(mmio + HOST_PORTS_IMPL); if (hpriv->saved_port_map && port_map != hpriv->saved_port_map) { - dev_info(dev, "forcing port_map 0x%x -> 0x%x\n", + dev_info(dev, "forcing port_map 0x%lx -> 0x%x\n", port_map, hpriv->saved_port_map); port_map = hpriv->saved_port_map; } else { @@ -527,7 +540,7 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) } if (hpriv->mask_port_map) { - dev_warn(dev, "masking port_map 0x%x -> 0x%x\n", + dev_warn(dev, "masking port_map 0x%lx -> 0x%lx\n", port_map, port_map & hpriv->mask_port_map); port_map &= hpriv->mask_port_map; @@ -546,7 +559,7 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) */ if (map_ports > ahci_nr_ports(cap)) { dev_warn(dev, - "implemented port map (0x%x) contains more ports than nr_ports (%u), using nr_ports\n", + "implemented port map (0x%lx) contains more ports than nr_ports (%u), using nr_ports\n", port_map, ahci_nr_ports(cap)); port_map = 0; } @@ -555,12 +568,26 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) /* fabricate port_map from cap.nr_ports for < AHCI 1.3 */ if (!port_map && vers < 0x10300) { port_map = (1 << ahci_nr_ports(cap)) - 1; - dev_warn(dev, "forcing PORTS_IMPL to 0x%x\n", port_map); + dev_warn(dev, "forcing PORTS_IMPL to 0x%lx\n", port_map); /* write the fixed up value to the PI register */ hpriv->saved_port_map = port_map; } + /* + * Preserve the ports capabilities defined by the platform. Note there + * is no need in storing the rest of the P#.CMD fields since they are + * volatile. + */ + for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) { + if (hpriv->saved_port_cap[i]) + continue; + + port_mmio = __ahci_port_base(hpriv, i); + hpriv->saved_port_cap[i] = + readl(port_mmio + PORT_CMD) & PORT_CMD_CAP; + } + /* record values to use during operation */ hpriv->cap = cap; hpriv->cap2 = cap2; @@ -590,13 +617,21 @@ EXPORT_SYMBOL_GPL(ahci_save_initial_config); static void ahci_restore_initial_config(struct ata_host *host) { struct ahci_host_priv *hpriv = host->private_data; + unsigned long port_map = hpriv->port_map; void __iomem *mmio = hpriv->mmio; + void __iomem *port_mmio; + int i; writel(hpriv->saved_cap, mmio + HOST_CAP); if (hpriv->saved_cap2) writel(hpriv->saved_cap2, mmio + HOST_CAP2); writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL); (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ + + for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) { + port_mmio = __ahci_port_base(hpriv, i); + writel(hpriv->saved_port_cap[i], port_mmio + PORT_CMD); + } } static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg) diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 691737b1a5ba..5ddae5f5355e 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -383,6 +383,34 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port, return rc; } +static int ahci_platform_get_firmware(struct ahci_host_priv *hpriv, + struct device *dev) +{ + struct device_node *child; + u32 port; + + if (!of_property_read_u32(dev->of_node, "hba-cap", &hpriv->saved_cap)) + hpriv->saved_cap &= (HOST_CAP_SSS | HOST_CAP_MPS); + + of_property_read_u32(dev->of_node, + "ports-implemented", &hpriv->saved_port_map); + + for_each_child_of_node(dev->of_node, child) { + if (!of_device_is_available(child)) + continue; + + if (of_property_read_u32(child, "reg", &port)) { + of_node_put(child); + return -EINVAL; + } + + if (!of_property_read_u32(child, "hba-port-cap", &hpriv->saved_port_cap[port])) + hpriv->saved_port_cap[port] &= PORT_CMD_CAP; + } + + return 0; +} + /** * ahci_platform_get_resources - Get platform resources * @pdev: platform device to get resources for @@ -526,9 +554,6 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, goto err_out; } - of_property_read_u32(dev->of_node, - "ports-implemented", &hpriv->saved_port_map); - if (child_nodes) { for_each_child_of_node(dev->of_node, child) { u32 port; @@ -593,6 +618,15 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, if (rc == -EPROBE_DEFER) goto err_out; } + + /* + * Retrieve firmware-specific flags which then will be used to set + * the HW-init fields of HBA and its ports + */ + rc = ahci_platform_get_firmware(hpriv, dev); + if (rc) + goto err_out; + pm_runtime_enable(dev); pm_runtime_get_sync(dev); hpriv->got_runtime_pm = true; From patchwork Thu Jul 28 11:18:58 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661591 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=bFIeSKzu; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LtpBL532Bz9sGC for ; Thu, 28 Jul 2022 21:21:30 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237025AbiG1LVY (ORCPT ); Thu, 28 Jul 2022 07:21:24 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48888 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236133AbiG1LUI (ORCPT ); Thu, 28 Jul 2022 07:20:08 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 1624967CA0; Thu, 28 Jul 2022 04:19:33 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 3B42716CC; Thu, 28 Jul 2022 14:21:56 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 3B42716CC DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007316; bh=E2uRKS0RTQUbjSMlSsaOAmHKVduRHLVGc8EcmMBH/G8=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=bFIeSKzu20DmS5o3vNcQja2gyuxow+5Nd+79dbrwwBX5QBaNaawKLed11kmq2OGDV MtmE+CCd1NoaY5df7qxlKZJGDi3n5EJAEv9Qim/FbJI/eRy0Vxk3mq+SpdriireNYh +sFRl6EACAMM1ZL3ANV2jOy+0+F14B3qbz5MwmBM= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:31 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke , Rob Herring , Krzysztof Kozlowski , Serge Semin CC: Serge Semin , Alexey Malahov , Pavel Parkhomenko , , , , Rob Herring Subject: [PATCH RESEND v6 17/23] dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema Date: Thu, 28 Jul 2022 14:18:58 +0300 Message-ID: <20220728111905.12427-18-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Synopsys AHCI SATA controller is mainly compatible with the generic AHCI SATA controller except a few peculiarities and the platform environment requirements. In particular it can have at least two reference clocks to feed up its AHB/AXI interface and SATA PHYs domain and at least one reset control for the application clock domain. In addition to that the DMA interface of each port can be tuned up to work with the predefined maximum data chunk size. Note unlike generic AHCI controller DWC AHCI can't have more than 8 ports. All of that is reflected in the new DWC AHCI SATA device DT binding. Note the DWC AHCI SATA controller DT-schema has been created in a way so to be reused for the vendor-specific DT-schemas (see for example the "snps,dwc-ahci" compatible string binding). One of which we are about to introduce. Signed-off-by: Serge Semin Reviewed-by: Rob Herring --- Changelog v2: - Replace min/max constraints of the snps,{tx,rx}-ts-max property with enum [ 1, 2, 4, ..., 1024 ]. (@Rob) Changelog v4: - Decrease the "additionalProperties" property identation otherwise it's percieved as the node property instead of the key one. (@Rob) - Use the ahci-port properties definition from the AHCI common schema in order to extend it with DWC AHCI SATA port properties. (@Rob) - Remove the Hannes' rb tag since the patch content has changed. Changelog v5: - Fix "resets" property description: replace "clocks" with "resets". (@Rob) - Extend "resets/clocks{-names}" property definitions. (@Rob) - Add "resets" property min/maxItems constraints. (@Rob) - Add names for the basic resets like RxOOB and PM-alive. (@Rob) - Add generic DWC AHCI SATA fallback for "rockchip,rk3568-dwc-ahci" bindings. (@Rob) - Due to the change above the schema has been split up into two parts: common DWC AHCI SATA properties and generic DW AHCI SATA controller DT-schema. (@Rob) --- .../bindings/ata/ahci-platform.yaml | 8 -- .../bindings/ata/snps,dwc-ahci-common.yaml | 102 ++++++++++++++++++ .../bindings/ata/snps,dwc-ahci.yaml | 75 +++++++++++++ 3 files changed, 177 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml create mode 100644 Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml index e19cf9828e68..7dc2a2e8f598 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml @@ -30,8 +30,6 @@ select: - marvell,armada-3700-ahci - marvell,armada-8k-ahci - marvell,berlin2q-ahci - - snps,dwc-ahci - - snps,spear-ahci required: - compatible @@ -48,17 +46,11 @@ properties: - marvell,berlin2-ahci - marvell,berlin2q-ahci - const: generic-ahci - - items: - - enum: - - rockchip,rk3568-dwc-ahci - - const: snps,dwc-ahci - enum: - cavium,octeon-7130-ahci - hisilicon,hisi-ahci - ibm,476gtr-ahci - marvell,armada-3700-ahci - - snps,dwc-ahci - - snps,spear-ahci reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml new file mode 100644 index 000000000000..c1457910520b --- /dev/null +++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/snps,dwc-ahci-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DWC AHCI SATA controller properties + +maintainers: + - Serge Semin + +description: + This document defines device tree schema for the generic Synopsys DWC + AHCI controller properties. + +select: false + +allOf: + - $ref: ahci-common.yaml# + +properties: + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: + Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock, + PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx) + clock, etc. + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + items: + oneOf: + - description: Application APB/AHB/AXI BIU clock + enum: + - pclk + - aclk + - hclk + - sata + - description: Power Module keep-alive clock + const: pmalive + - description: RxOOB detection clock + const: rxoob + - description: SATA Ports reference clock + const: ref + + resets: + description: + At least basic application and reference clock domains resets are + normally supported by the DWC AHCI SATA controller. + minItems: 1 + maxItems: 4 + + reset-names: + minItems: 1 + maxItems: 4 + items: + oneOf: + - description: Application AHB/AXI BIU clock domain reset control + enum: + - arst + - hrst + - description: Power Module keep-alive clock domain reset control + const: pmalive + - description: RxOOB detection clock domain reset control + const: rxoob + - description: Reference clock domain reset control + const: ref + +patternProperties: + "^sata-port@[0-9a-e]$": + $ref: '#/$defs/dwc-ahci-port' + +additionalProperties: true + +$defs: + dwc-ahci-port: + $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port + + properties: + reg: + minimum: 0 + maximum: 7 + + snps,tx-ts-max: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Maximal size of Tx DMA transactions in FIFO words + enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ] + + snps,rx-ts-max: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Maximal size of Rx DMA transactions in FIFO words + enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ] + +... diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml new file mode 100644 index 000000000000..5afa4b57ce20 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/snps,dwc-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DWC AHCI SATA controller + +maintainers: + - Serge Semin + +description: + This document defines device tree bindings for the generic Synopsys DWC + implementation of the AHCI SATA controller. + +allOf: + - $ref: snps,dwc-ahci-common.yaml# + +properties: + compatible: + oneOf: + - description: Synopsys AHCI SATA-compatible devices + const: snps,dwc-ahci + - description: SPEAr1340 AHCI SATA device + const: snps,spear-ahci + - description: Rockhip RK3568 AHCI controller + items: + - const: rockchip,rk3568-dwc-ahci + - const: snps,dwc-ahci + +patternProperties: + "^sata-port@[0-9a-e]$": + $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + #include + + sata@122f0000 { + compatible = "snps,dwc-ahci"; + reg = <0x122F0000 0x1ff>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = ; + + clocks = <&clock1>, <&clock2>; + clock-names = "aclk", "ref"; + + phys = <&sata_phy>; + phy-names = "sata-phy"; + + ports-implemented = <0x1>; + + sata-port@0 { + reg = <0>; + + hba-port-cap = ; + + snps,tx-ts-max = <512>; + snps,rx-ts-max = <512>; + }; + }; + +... From patchwork Thu Jul 28 11:18:59 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661593 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=h7d0hnf3; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LtpBf43xNz9sGG for ; Thu, 28 Jul 2022 21:21:46 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237058AbiG1LVp (ORCPT ); Thu, 28 Jul 2022 07:21:45 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49288 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235731AbiG1LUQ (ORCPT ); Thu, 28 Jul 2022 07:20:16 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id CB628675B5; Thu, 28 Jul 2022 04:19:35 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 6481316D0; Thu, 28 Jul 2022 14:21:57 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 6481316D0 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007317; bh=GqGg00GJ++09EoLJB+wD1QV4WvRtScBrf/f2QDDfF18=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=h7d0hnf3SyVT6+BcP0yl82j3/McPBY5ungJuFPeeUY/p0E1/6fOAlv6r7k70r3zun eikJWOaFfSId7HvHPsP9tON+E3GE/1/0ZAzNwOJlwOetzkFdBPs6a6QkFRQHXPPyE/ ogTNhj8B0TiYU0kO8g2Tmx2RZt+en4t9VvMK0VEQ= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:32 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 18/23] ata: libahci_platform: Add function returning a clock-handle by id Date: Thu, 28 Jul 2022 14:18:59 +0300 Message-ID: <20220728111905.12427-19-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Since all the clocks are retrieved by the method ahci_platform_get_resources() there is no need for the LLD (glue) drivers to be looking for some particular of them in the kernel clocks table again. Instead we suggest to add a simple method returning a device-specific clock with passed connection ID if it is managed to be found. Otherwise the function will return NULL. Thus the glue-drivers won't need to either manually touching the hpriv->clks array or calling clk_get()-friends. The AHCI platform drivers will be able to use the new function right after the ahci_platform_get_resources() method invocation and up to the device removal. Note the method is left unused here, but will be utilized in the framework of the DWC AHCI SATA driver being added in the next commit. Signed-off-by: Serge Semin --- Changelog v2: - Fix some grammar mistakes in the method description. Changelog v4: - Add a note regarding the new method usage. Changelog v5: - Fix the ahci_platform_find_clk() declaration identations. (@Damien) - Simplify the ahci_platform_find_clk() method body by dropping the local poiter to clk structure. (@Damien) --- drivers/ata/libahci_platform.c | 24 ++++++++++++++++++++++++ include/linux/ahci_platform.h | 3 +++ 2 files changed, 27 insertions(+) diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 5ddae5f5355e..83f1d67f003e 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -94,6 +94,30 @@ void ahci_platform_disable_phys(struct ahci_host_priv *hpriv) } EXPORT_SYMBOL_GPL(ahci_platform_disable_phys); +/** + * ahci_platform_find_clk - Find platform clock + * @hpriv: host private area to store config values + * @con_id: clock connection ID + * + * This function returns a pointer to the clock descriptor of the clock with + * the passed ID. + * + * RETURNS: + * Pointer to the clock descriptor on success otherwise NULL + */ +struct clk *ahci_platform_find_clk(struct ahci_host_priv *hpriv, const char *con_id) +{ + int i; + + for (i = 0; i < hpriv->n_clks; i++) { + if (!strcmp(hpriv->clks[i].id, con_id)) + return hpriv->clks[i].clk; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(ahci_platform_find_clk); + /** * ahci_platform_enable_clks - Enable platform clocks * @hpriv: host private area to store config values diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h index 6d7dd472d370..17fa26215292 100644 --- a/include/linux/ahci_platform.h +++ b/include/linux/ahci_platform.h @@ -13,6 +13,7 @@ #include +struct clk; struct device; struct ata_port_info; struct ahci_host_priv; @@ -21,6 +22,8 @@ struct scsi_host_template; int ahci_platform_enable_phys(struct ahci_host_priv *hpriv); void ahci_platform_disable_phys(struct ahci_host_priv *hpriv); +struct clk *ahci_platform_find_clk(struct ahci_host_priv *hpriv, + const char *con_id); int ahci_platform_enable_clks(struct ahci_host_priv *hpriv); void ahci_platform_disable_clks(struct ahci_host_priv *hpriv); int ahci_platform_deassert_rsts(struct ahci_host_priv *hpriv); From patchwork Thu Jul 28 11:19:00 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661594 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=gbtFqCz6; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LtpBn4Ppwz9sGC for ; Thu, 28 Jul 2022 21:21:53 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236846AbiG1LVr (ORCPT ); Thu, 28 Jul 2022 07:21:47 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49426 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236205AbiG1LUR (ORCPT ); Thu, 28 Jul 2022 07:20:17 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 6ECCF67169; Thu, 28 Jul 2022 04:19:36 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 10A9C16D1; Thu, 28 Jul 2022 14:21:59 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 10A9C16D1 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007319; bh=lDcRQOupurGl9U+SDf0GXbEwoE/FFNVKq3sLGlaJaV0=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=gbtFqCz62vuZTwC4n0nvSRso6AW6wgQZDUGdX0NACcFOYLsEoSadU0TuimKSLrXkB viTxW9pLh+tz7CQ+c4l4gWsFqWbTfGqHc9k77mfWBwGMJ1bj8rnv1+4qD1QWekG/bO CRhk44pWw3iItsWBWujKkQXeyZA/LRCJ4fZ0BJlY= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:33 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke , Serge Semin CC: Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 19/23] ata: ahci: Add DWC AHCI SATA controller support Date: Thu, 28 Jul 2022 14:19:00 +0300 Message-ID: <20220728111905.12427-20-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Synopsys AHCI SATA controller can work pretty under with the generic AHCI-platform driver control. But there are vendor-specific peculiarities which can tune the device performance up and which may need to be fixed up for proper device functioning. In addition some DWC AHCI-based controllers may require small platform-specific fixups, so adding them in the generic AHCI driver would have ruined the code simplicity. Shortly speaking in order to keep the generic AHCI-platform code clean and have DWC AHCI SATA-specific features supported we suggest to add a dedicated DWC AHCI SATA device driver. Aside with the standard AHCI-platform resources getting, enabling/disabling and the controller registration the new driver performs the next actions. First of all there is a way to verify whether the HBA/ports capabilities activated in OF are correct. Almost all features availability is reflected in the vendor-specific parameters registers. So the DWC AHCI driver does the capabilities sanity check based on the corresponding fields state. Secondly if either the Command Completion Coalescing or the Device Sleep feature is enabled the DWC AHCI-specific internal 1ms timer must be fixed in accordance with the application clock signal frequency. In particular the timer value must be set to be Fapp * 1000. Normally the SoC designers pre-configure the TIMER1MS register to contain a correct value by default. But the platforms can support the application clock rate change. If that happens the 1ms timer value must be accordingly updated otherwise the dependent features won't work as expected. In the DWC AHCI driver we suggest to rely on the "aclk" reference clock rate to set the timer interval up. That clock source is supposed to be the AHCI SATA application clock in accordance with the DT bindings. Finally DWC AHCI SATA controller AXI/AHB bus DMA-engine can be tuned up to transfer up to 1024 * FIFO words at a time by setting the Tx/Rx transaction size in the DMA control register. The maximum value depends on the DMA data bus and AXI/AHB bus maximum burst length. In most of the cases it's better to set the maximum possible value to reach the best AHCI SATA controller performance. But sometimes in order to improve the system interconnect responsiveness, transferring in smaller data chunks may be more preferable. For such cases and for the case when the default value doesn't provide the best DMA bus performance we suggest to use the new HBA-port specific DT-properties "snps,{tx,rx}-ts-max" to tune the DMA transactions size up. After all the settings denoted above are handled the DWC AHCI SATA driver proceeds further with the standard AHCI-platform host initializations. Note since DWC AHCI controller is now have a dedicated driver we can discard the corresponding compatible string from the ahci-platform.c module. The same concerns "snps,spear-ahci" compatible string, which is also based on the DWC AHCI IP-core. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke --- Note there are three more AHCI SATA drivers which have been created for the devices based on the DWC AHCI SATA IP-core. It's AHCI SunXi, St and iMX drivers. Mostly they don't support the features implemented in this driver. So hopefully sometime in future they can be converted to be based on the generic DWC AHCI SATA driver and just perform some subvendor-specific setups in their own LLDD (glue) driver code. But for now let's leave the generic DWC AHCI SATA code as is. Hopefully the new DWC AHCI-based device drivers will try at least to re-use a part of the DWC AHCI driver methods if not being able to be integrated in the generic DWC driver code. Changelog v2: - Change the local objects prefix from 'dwc_ahci_' to 'ahci_dwc_'. (@Damien) Changelog v4: - Replace GPLv2 with just GPL license which are the same in the framework of the MODULE_LICENSE() macro. Changelog v5: - Drop the "default SATA_AHCI_PLATFORM" setting from the AHCI_DWC config. (@Randy) - Replace deprecated SIMPLE_DEV_PM_OPS() with the DEFINE_SIMPLE_DEV_PM_OPS() macro usage. (@Damien) --- drivers/ata/Kconfig | 9 + drivers/ata/Makefile | 1 + drivers/ata/ahci_dwc.c | 396 ++++++++++++++++++++++++++++++++++++ drivers/ata/ahci_platform.c | 2 - 4 files changed, 406 insertions(+), 2 deletions(-) create mode 100644 drivers/ata/ahci_dwc.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index bb45a9c00514..675bb44144d3 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -176,6 +176,15 @@ config AHCI_DM816 If unsure, say N. +config AHCI_DWC + tristate "Synopsys DWC AHCI SATA support" + select SATA_HOST + help + This option enables support for the Synopsys DWC AHCI SATA + controller implementation. + + If unsure, say N. + config AHCI_ST tristate "ST AHCI SATA support" depends on ARCH_STI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index b8aebfb14e82..34623365d9a6 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_AHCI_BRCM) += ahci_brcm.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_DM816) += ahci_dm816.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_DWC) += ahci_dwc.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_MTK) += ahci_mtk.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o diff --git a/drivers/ata/ahci_dwc.c b/drivers/ata/ahci_dwc.c new file mode 100644 index 000000000000..96d73a4de510 --- /dev/null +++ b/drivers/ata/ahci_dwc.c @@ -0,0 +1,396 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * DWC AHCI SATA Platform driver + * + * Copyright (C) 2021 BAIKAL ELECTRONICS, JSC + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ahci.h" + +#define DRV_NAME "ahci-dwc" + +#define AHCI_DWC_FBS_PMPN_MAX 15 + +/* DWC AHCI SATA controller specific registers */ +#define AHCI_DWC_HOST_OOBR 0xbc +#define AHCI_DWC_HOST_OOB_WE BIT(31) +#define AHCI_DWC_HOST_CWMIN_MASK GENMASK(30, 24) +#define AHCI_DWC_HOST_CWMAX_MASK GENMASK(23, 16) +#define AHCI_DWC_HOST_CIMIN_MASK GENMASK(15, 8) +#define AHCI_DWC_HOST_CIMAX_MASK GENMASK(7, 0) + +#define AHCI_DWC_HOST_GPCR 0xd0 +#define AHCI_DWC_HOST_GPSR 0xd4 + +#define AHCI_DWC_HOST_TIMER1MS 0xe0 +#define AHCI_DWC_HOST_TIMV_MASK GENMASK(19, 0) + +#define AHCI_DWC_HOST_GPARAM1R 0xe8 +#define AHCI_DWC_HOST_ALIGN_M BIT(31) +#define AHCI_DWC_HOST_RX_BUFFER BIT(30) +#define AHCI_DWC_HOST_PHY_DATA_MASK GENMASK(29, 28) +#define AHCI_DWC_HOST_PHY_RST BIT(27) +#define AHCI_DWC_HOST_PHY_CTRL_MASK GENMASK(26, 21) +#define AHCI_DWC_HOST_PHY_STAT_MASK GENMASK(20, 15) +#define AHCI_DWC_HOST_LATCH_M BIT(14) +#define AHCI_DWC_HOST_PHY_TYPE_MASK GENMASK(13, 11) +#define AHCI_DWC_HOST_RET_ERR BIT(10) +#define AHCI_DWC_HOST_AHB_ENDIAN_MASK GENMASK(9, 8) +#define AHCI_DWC_HOST_S_HADDR BIT(7) +#define AHCI_DWC_HOST_M_HADDR BIT(6) +#define AHCI_DWC_HOST_S_HDATA_MASK GENMASK(5, 3) +#define AHCI_DWC_HOST_M_HDATA_MASK GENMASK(2, 0) + +#define AHCI_DWC_HOST_GPARAM2R 0xec +#define AHCI_DWC_HOST_FBS_MEM_S BIT(19) +#define AHCI_DWC_HOST_FBS_PMPN_MASK GENMASK(17, 16) +#define AHCI_DWC_HOST_FBS_SUP BIT(15) +#define AHCI_DWC_HOST_DEV_CP BIT(14) +#define AHCI_DWC_HOST_DEV_MP BIT(13) +#define AHCI_DWC_HOST_ENCODE_M BIT(12) +#define AHCI_DWC_HOST_RXOOB_CLK_M BIT(11) +#define AHCI_DWC_HOST_RXOOB_M BIT(10) +#define AHCI_DWC_HOST_TXOOB_M BIT(9) +#define AHCI_DWC_HOST_RXOOB_M BIT(10) +#define AHCI_DWC_HOST_RXOOB_CLK_MASK GENMASK(8, 0) + +#define AHCI_DWC_HOST_PPARAMR 0xf0 +#define AHCI_DWC_HOST_TX_MEM_M BIT(11) +#define AHCI_DWC_HOST_TX_MEM_S BIT(10) +#define AHCI_DWC_HOST_RX_MEM_M BIT(9) +#define AHCI_DWC_HOST_RX_MEM_S BIT(8) +#define AHCI_DWC_HOST_TXFIFO_DEPTH GENMASK(7, 4) +#define AHCI_DWC_HOST_RXFIFO_DEPTH GENMASK(3, 0) + +#define AHCI_DWC_HOST_TESTR 0xf4 +#define AHCI_DWC_HOST_PSEL_MASK GENMASK(18, 16) +#define AHCI_DWC_HOST_TEST_IF BIT(0) + +#define AHCI_DWC_HOST_VERSIONR 0xf8 +#define AHCI_DWC_HOST_IDR 0xfc + +#define AHCI_DWC_PORT_DMACR 0x70 +#define AHCI_DWC_PORT_RXABL_MASK GENMASK(15, 12) +#define AHCI_DWC_PORT_TXABL_MASK GENMASK(11, 8) +#define AHCI_DWC_PORT_RXTS_MASK GENMASK(7, 4) +#define AHCI_DWC_PORT_TXTS_MASK GENMASK(3, 0) +#define AHCI_DWC_PORT_PHYCR 0x74 +#define AHCI_DWC_PORT_PHYSR 0x78 + +struct ahci_dwc_host_priv { + struct platform_device *pdev; + + u32 timv; + u32 dmacr[AHCI_MAX_PORTS]; +}; + +static struct ahci_host_priv *ahci_dwc_get_resources(struct platform_device *pdev) +{ + struct ahci_dwc_host_priv *dpriv; + struct ahci_host_priv *hpriv; + + dpriv = devm_kzalloc(&pdev->dev, sizeof(*dpriv), GFP_KERNEL); + if (!dpriv) + return ERR_PTR(-ENOMEM); + + dpriv->pdev = pdev; + + hpriv = ahci_platform_get_resources(pdev, AHCI_PLATFORM_GET_RESETS); + if (IS_ERR(hpriv)) + return hpriv; + + hpriv->plat_data = (void *)dpriv; + + return hpriv; +} + +static void ahci_dwc_check_cap(struct ahci_host_priv *hpriv) +{ + unsigned long port_map = hpriv->saved_port_map | hpriv->mask_port_map; + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + bool dev_mp, dev_cp, fbs_sup; + unsigned int fbs_pmp; + u32 param; + int i; + + param = readl(hpriv->mmio + AHCI_DWC_HOST_GPARAM2R); + dev_mp = !!(param & AHCI_DWC_HOST_DEV_MP); + dev_cp = !!(param & AHCI_DWC_HOST_DEV_CP); + fbs_sup = !!(param & AHCI_DWC_HOST_FBS_SUP); + fbs_pmp = 5 * FIELD_GET(AHCI_DWC_HOST_FBS_PMPN_MASK, param); + + if (!dev_mp && hpriv->saved_cap & HOST_CAP_MPS) { + dev_warn(&dpriv->pdev->dev, "MPS is unsupported\n"); + hpriv->saved_cap &= ~HOST_CAP_MPS; + } + + + if (fbs_sup && fbs_pmp < AHCI_DWC_FBS_PMPN_MAX) { + dev_warn(&dpriv->pdev->dev, "PMPn is limited up to %u ports\n", + fbs_pmp); + } + + for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) { + if (!dev_mp && hpriv->saved_port_cap[i] & PORT_CMD_MPSP) { + dev_warn(&dpriv->pdev->dev, "MPS incapable port %d\n", i); + hpriv->saved_port_cap[i] &= ~PORT_CMD_MPSP; + } + + if (!dev_cp && hpriv->saved_port_cap[i] & PORT_CMD_CPD) { + dev_warn(&dpriv->pdev->dev, "CPD incapable port %d\n", i); + hpriv->saved_port_cap[i] &= ~PORT_CMD_CPD; + } + + if (!fbs_sup && hpriv->saved_port_cap[i] & PORT_CMD_FBSCP) { + dev_warn(&dpriv->pdev->dev, "FBS incapable port %d\n", i); + hpriv->saved_port_cap[i] &= ~PORT_CMD_FBSCP; + } + } +} + +static void ahci_dwc_init_timer(struct ahci_host_priv *hpriv) +{ + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + unsigned long rate; + struct clk *aclk; + u32 cap, cap2; + + /* 1ms tick is generated only for the CCC or DevSleep features */ + cap = readl(hpriv->mmio + HOST_CAP); + cap2 = readl(hpriv->mmio + HOST_CAP2); + if (!(cap & HOST_CAP_CCC) && !(cap2 & HOST_CAP2_SDS)) + return; + + /* + * Tick is generated based on the AXI/AHB application clocks signal + * so we need to be sure in the clock we are going to use. + */ + aclk = ahci_platform_find_clk(hpriv, "aclk"); + if (!aclk) + return; + + /* 1ms timer interval is set as TIMV = AMBA_FREQ[MHZ] * 1000 */ + dpriv->timv = readl(hpriv->mmio + AHCI_DWC_HOST_TIMER1MS); + dpriv->timv = FIELD_GET(AHCI_DWC_HOST_TIMV_MASK, dpriv->timv); + rate = clk_get_rate(aclk) / 1000UL; + if (rate == dpriv->timv) + return; + + dev_info(&dpriv->pdev->dev, "Update CCC/DevSlp timer for Fapp %lu MHz\n", + rate / 1000UL); + dpriv->timv = FIELD_PREP(AHCI_DWC_HOST_TIMV_MASK, rate); + writel(dpriv->timv, hpriv->mmio + AHCI_DWC_HOST_TIMER1MS); +} + +static int ahci_dwc_init_dmacr(struct ahci_host_priv *hpriv) +{ + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + struct device_node *child; + void __iomem *port_mmio; + u32 port, dmacr, ts; + + /* + * Update the DMA Tx/Rx transaction sizes in accordance with the + * platform setup. Note values exceeding maximal or minimal limits will + * be automatically clamped. Also note the register isn't affected by + * the HBA global reset so we can freely initialize it once until the + * next system reset. + */ + for_each_child_of_node(dpriv->pdev->dev.of_node, child) { + if (!of_device_is_available(child)) + continue; + + if (of_property_read_u32(child, "reg", &port)) { + of_node_put(child); + return -EINVAL; + } + + port_mmio = __ahci_port_base(hpriv, port); + dmacr = readl(port_mmio + AHCI_DWC_PORT_DMACR); + + if (!of_property_read_u32(child, "snps,tx-ts-max", &ts)) { + ts = ilog2(ts); + dmacr &= ~AHCI_DWC_PORT_TXTS_MASK; + dmacr |= FIELD_PREP(AHCI_DWC_PORT_TXTS_MASK, ts); + } + + if (!of_property_read_u32(child, "snps,rx-ts-max", &ts)) { + ts = ilog2(ts); + dmacr &= ~AHCI_DWC_PORT_RXTS_MASK; + dmacr |= FIELD_PREP(AHCI_DWC_PORT_RXTS_MASK, ts); + } + + writel(dmacr, port_mmio + AHCI_DWC_PORT_DMACR); + dpriv->dmacr[port] = dmacr; + } + + return 0; +} + +static int ahci_dwc_init_host(struct ahci_host_priv *hpriv) +{ + int rc; + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + ahci_dwc_check_cap(hpriv); + + ahci_dwc_init_timer(hpriv); + + rc = ahci_dwc_init_dmacr(hpriv); + if (rc) + goto err_disable_resources; + + return 0; + +err_disable_resources: + ahci_platform_disable_resources(hpriv); + + return rc; +} + +static int ahci_dwc_reinit_host(struct ahci_host_priv *hpriv) +{ + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + unsigned long port_map = hpriv->port_map; + void __iomem *port_mmio; + int i, rc; + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + writel(dpriv->timv, hpriv->mmio + AHCI_DWC_HOST_TIMER1MS); + + for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) { + port_mmio = __ahci_port_base(hpriv, i); + writel(dpriv->dmacr[i], port_mmio + AHCI_DWC_PORT_DMACR); + } + + return 0; +} + +static void ahci_dwc_clear_host(struct ahci_host_priv *hpriv) +{ + ahci_platform_disable_resources(hpriv); +} + +static void ahci_dwc_stop_host(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + + ahci_dwc_clear_host(hpriv); +} + +static struct ata_port_operations ahci_dwc_port_ops = { + .inherits = &ahci_platform_ops, + .host_stop = ahci_dwc_stop_host, +}; + +static const struct ata_port_info ahci_dwc_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_dwc_port_ops, +}; + +static struct scsi_host_template ahci_dwc_scsi_info = { + AHCI_SHT(DRV_NAME), +}; + +static int ahci_dwc_probe(struct platform_device *pdev) +{ + struct ahci_host_priv *hpriv; + int rc; + + hpriv = ahci_dwc_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + rc = ahci_dwc_init_host(hpriv); + if (rc) + return rc; + + rc = ahci_platform_init_host(pdev, hpriv, &ahci_dwc_port_info, + &ahci_dwc_scsi_info); + if (rc) + goto err_clear_host; + + return 0; + +err_clear_host: + ahci_dwc_clear_host(hpriv); + + return rc; +} + +#ifdef CONFIG_PM_SLEEP +static int ahci_dwc_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int rc; + + rc = ahci_platform_suspend_host(dev); + if (rc) + return rc; + + ahci_dwc_clear_host(hpriv); + + return 0; +} + +static int ahci_dwc_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int rc; + + rc = ahci_dwc_reinit_host(hpriv); + if (rc) + return rc; + + return ahci_platform_resume_host(dev); +} +#endif + +static DEFINE_SIMPLE_DEV_PM_OPS(ahci_dwc_pm_ops, ahci_dwc_suspend, + ahci_dwc_resume); + +static const struct of_device_id ahci_dwc_of_match[] = { + { .compatible = "snps,dwc-ahci", }, + { .compatible = "snps,spear-ahci", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ahci_dwc_of_match); + +static struct platform_driver ahci_dwc_driver = { + .probe = ahci_dwc_probe, + .remove = ata_platform_remove_one, + .shutdown = ahci_platform_shutdown, + .driver = { + .name = DRV_NAME, + .of_match_table = ahci_dwc_of_match, + .pm = &ahci_dwc_pm_ops, + }, +}; +module_platform_driver(ahci_dwc_driver); + +MODULE_DESCRIPTION("DWC AHCI SATA platform driver"); +MODULE_AUTHOR("Serge Semin "); +MODULE_LICENSE("GPL"); diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 9b56490ecbc3..8f5572a9f8f1 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -80,9 +80,7 @@ static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend, static const struct of_device_id ahci_of_match[] = { { .compatible = "generic-ahci", }, /* Keep the following compatibles for device tree compatibility */ - { .compatible = "snps,spear-ahci", }, { .compatible = "ibm,476gtr-ahci", }, - { .compatible = "snps,dwc-ahci", }, { .compatible = "hisilicon,hisi-ahci", }, { .compatible = "cavium,octeon-7130-ahci", }, { /* sentinel */ } From patchwork Thu Jul 28 11:19:01 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661596 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=g5MkF/HS; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LtpBs06pCz9sGC for ; Thu, 28 Jul 2022 21:21:57 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236849AbiG1LVs (ORCPT ); Thu, 28 Jul 2022 07:21:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49438 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236824AbiG1LUS (ORCPT ); Thu, 28 Jul 2022 07:20:18 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id BF46167CB3; Thu, 28 Jul 2022 04:19:37 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 1DE4516D2; Thu, 28 Jul 2022 14:22:00 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 1DE4516D2 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007320; bh=GH3C2KGFWETo+pp+7CSNeBz/nSGLgXim/wtEZEgyQ/I=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=g5MkF/HSvt0h0+RptfEleJoj2b4sinnqkIyVTFUzSqkfshNWTup8g7gUDkuTD94CX r3hbdw6yu90opjGBj/TTOM1Xp7u1T8uuiVCkzcyLa4P1nocY88ePcAu2+bdDk/wdbP f71e/O1fVEZgz2xxUNU3L4EMo1keSKYLq0DFuTNI= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:35 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke , Serge Semin , Rob Herring , Krzysztof Kozlowski CC: Serge Semin , Alexey Malahov , Pavel Parkhomenko , , , , Rob Herring Subject: [PATCH RESEND v6 20/23] dt-bindings: ata: ahci: Add Baikal-T1 AHCI SATA controller DT schema Date: Thu, 28 Jul 2022 14:19:01 +0300 Message-ID: <20220728111905.12427-21-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Baikal-T1 AHCI controller is based on the DWC AHCI SATA IP-core v4.10a with the next specific settings: two SATA ports, cascaded CSR access based on two clock domains (APB and AXI), selectable source of the reference clock (though stable work is currently available from the external source only), two reset lanes for the application and SATA ports domains. Other than that the device is fully compatible with the generic DWC AHCI SATA bindings. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke Reviewed-by: Rob Herring --- Changelog v2: - Rename 'syscon' property to 'baikal,bt1-syscon'. - Drop macro usage from the example node. Changelog v4: - Use the DWC AHCI port properties definition from the DWC AHCI SATA common schema. (@Rob) - Drop Baikal-T1 syscon reference and implement the clock signal source in the framework of the clock controller. (@Rob) Changelog v5: - Drop generic compatible fallback "snps,dwc-ahci". (@Rob) - Define SATA-port pattern property to be applicable for two ports only. - Drop "|" qualifier from the description property. --- .../bindings/ata/baikal,bt1-ahci.yaml | 115 ++++++++++++++++++ 1 file changed, 115 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml diff --git a/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml new file mode 100644 index 000000000000..9b7ca4759bd7 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/baikal,bt1-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 SoC AHCI SATA controller + +maintainers: + - Serge Semin + +description: + AHCI SATA controller embedded into the Baikal-T1 SoC is based on the + DWC AHCI SATA v4.10a IP-core. + +allOf: + - $ref: snps,dwc-ahci-common.yaml# + +properties: + compatible: + const: baikal,bt1-ahci + + clocks: + items: + - description: Peripheral APB bus clock + - description: Application AXI BIU clock + - description: SATA Ports reference clock + + clock-names: + items: + - const: pclk + - const: aclk + - const: ref + + resets: + items: + - description: Application AXI BIU domain reset + - description: SATA Ports clock domain reset + + reset-names: + items: + - const: arst + - const: ref + + ports-implemented: + maximum: 0x3 + +patternProperties: + "^sata-port@[0-1]$": + $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port + + properties: + reg: + minimum: 0 + maximum: 1 + + snps,tx-ts-max: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Due to having AXI3 bus interface utilized the maximum Tx DMA + transaction size can't exceed 16 beats (AxLEN[3:0]). + enum: [ 1, 2, 4, 8, 16 ] + + snps,rx-ts-max: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Due to having AXI3 bus interface utilized the maximum Rx DMA + transaction size can't exceed 16 beats (AxLEN[3:0]). + enum: [ 1, 2, 4, 8, 16 ] + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +unevaluatedProperties: false + +examples: + - | + sata@1f050000 { + compatible = "baikal,bt1-ahci"; + reg = <0x1f050000 0x2000>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <0 64 4>; + + clocks = <&ccu_sys 1>, <&ccu_axi 2>, <&sata_ref_clk>; + clock-names = "pclk", "aclk", "ref"; + + resets = <&ccu_axi 2>, <&ccu_sys 0>; + reset-names = "arst", "ref"; + + ports-implemented = <0x3>; + + sata-port@0 { + reg = <0>; + + snps,tx-ts-max = <4>; + snps,rx-ts-max = <4>; + }; + + sata-port@1 { + reg = <1>; + + snps,tx-ts-max = <4>; + snps,rx-ts-max = <4>; + }; + }; +... From patchwork Thu Jul 28 11:19:02 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661597 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=lZV1NJde; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LtpC9249Lz9sGC for ; Thu, 28 Jul 2022 21:22:13 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237127AbiG1LWK (ORCPT ); Thu, 28 Jul 2022 07:22:10 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50040 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236861AbiG1LU0 (ORCPT ); Thu, 28 Jul 2022 07:20:26 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id F34A067CBB; Thu, 28 Jul 2022 04:19:38 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 222CE16D3; Thu, 28 Jul 2022 14:22:01 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 222CE16D3 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007321; bh=dq5UGE0UhHJptPCfmOAs7RIk99K8/aQGJR2fT1lu2og=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=lZV1NJdePYexBnI9Z2mdh5Fj0NhLKF/AIzxjz/HqSzxPLisEN1W36mwJoF4HiFDxL T6fadpbcvAkfK5hQm/O4z5uvvroYsx4qgN3yB5krqEgrwWZYvpUZKgTDfJSvKeQj7K REW4ZHaDLZvdZikvdjD9m5ZkTaD3uCVOj7jIsq7Y= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:36 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke , Serge Semin CC: Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 21/23] ata: ahci-dwc: Add platform-specific quirks support Date: Thu, 28 Jul 2022 14:19:02 +0300 Message-ID: <20220728111905.12427-22-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Some DWC AHCI SATA IP-core derivatives require to perform small platform or IP-core specific setups. They are too small to be placed in a dedicated driver. It's just much easier to have a set of quirks for them right in the DWC AHCI driver code. Since we are about to add such platform support, as a pre-requisite we introduce a platform-data based DWC AHCI quirks API. The platform data can be used to define the flags passed to the ahci_platform_get_resources() method, additional AHCI host-flags and a set of callbacks to initialize, re-initialize and clear the platform settings. Signed-off-by: Serge Semin --- Changelog v2: - Change the local objects prefix from 'dwc_ahci_' to 'ahci_dwc_'. (@Damien) Changelog v4: - Convert ahci_dwc_plat to being statically defined. (@kbot) --- drivers/ata/ahci_dwc.c | 52 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 48 insertions(+), 4 deletions(-) diff --git a/drivers/ata/ahci_dwc.c b/drivers/ata/ahci_dwc.c index 96d73a4de510..44a9bb7696ab 100644 --- a/drivers/ata/ahci_dwc.c +++ b/drivers/ata/ahci_dwc.c @@ -90,7 +90,16 @@ #define AHCI_DWC_PORT_PHYCR 0x74 #define AHCI_DWC_PORT_PHYSR 0x78 +struct ahci_dwc_plat_data { + unsigned int pflags; + unsigned int hflags; + int (*init)(struct ahci_host_priv *hpriv); + int (*reinit)(struct ahci_host_priv *hpriv); + void (*clear)(struct ahci_host_priv *hpriv); +}; + struct ahci_dwc_host_priv { + const struct ahci_dwc_plat_data *pdata; struct platform_device *pdev; u32 timv; @@ -107,11 +116,15 @@ static struct ahci_host_priv *ahci_dwc_get_resources(struct platform_device *pde return ERR_PTR(-ENOMEM); dpriv->pdev = pdev; + dpriv->pdata = device_get_match_data(&pdev->dev); + if (!dpriv->pdata) + return ERR_PTR(-EINVAL); - hpriv = ahci_platform_get_resources(pdev, AHCI_PLATFORM_GET_RESETS); + hpriv = ahci_platform_get_resources(pdev, dpriv->pdata->pflags); if (IS_ERR(hpriv)) return hpriv; + hpriv->flags |= dpriv->pdata->hflags; hpriv->plat_data = (void *)dpriv; return hpriv; @@ -242,22 +255,33 @@ static int ahci_dwc_init_dmacr(struct ahci_host_priv *hpriv) static int ahci_dwc_init_host(struct ahci_host_priv *hpriv) { + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; int rc; rc = ahci_platform_enable_resources(hpriv); if (rc) return rc; + if (dpriv->pdata->init) { + rc = dpriv->pdata->init(hpriv); + if (rc) + goto err_disable_resources; + } + ahci_dwc_check_cap(hpriv); ahci_dwc_init_timer(hpriv); rc = ahci_dwc_init_dmacr(hpriv); if (rc) - goto err_disable_resources; + goto err_clear_platform; return 0; +err_clear_platform: + if (dpriv->pdata->clear) + dpriv->pdata->clear(hpriv); + err_disable_resources: ahci_platform_disable_resources(hpriv); @@ -275,6 +299,12 @@ static int ahci_dwc_reinit_host(struct ahci_host_priv *hpriv) if (rc) return rc; + if (dpriv->pdata->reinit) { + rc = dpriv->pdata->reinit(hpriv); + if (rc) + goto err_disable_resources; + } + writel(dpriv->timv, hpriv->mmio + AHCI_DWC_HOST_TIMER1MS); for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) { @@ -283,10 +313,20 @@ static int ahci_dwc_reinit_host(struct ahci_host_priv *hpriv) } return 0; + +err_disable_resources: + ahci_platform_disable_resources(hpriv); + + return rc; } static void ahci_dwc_clear_host(struct ahci_host_priv *hpriv) { + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + + if (dpriv->pdata->clear) + dpriv->pdata->clear(hpriv); + ahci_platform_disable_resources(hpriv); } @@ -372,9 +412,13 @@ static int ahci_dwc_resume(struct device *dev) static DEFINE_SIMPLE_DEV_PM_OPS(ahci_dwc_pm_ops, ahci_dwc_suspend, ahci_dwc_resume); +static struct ahci_dwc_plat_data ahci_dwc_plat = { + .pflags = AHCI_PLATFORM_GET_RESETS, +}; + static const struct of_device_id ahci_dwc_of_match[] = { - { .compatible = "snps,dwc-ahci", }, - { .compatible = "snps,spear-ahci", }, + { .compatible = "snps,dwc-ahci", &ahci_dwc_plat }, + { .compatible = "snps,spear-ahci", &ahci_dwc_plat }, {}, }; MODULE_DEVICE_TABLE(of, ahci_dwc_of_match); From patchwork Thu Jul 28 11:19:03 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661599 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=Gpi1x6iE; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LtpCJ342Rz9sGG for ; Thu, 28 Jul 2022 21:22:20 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237152AbiG1LWP (ORCPT ); Thu, 28 Jul 2022 07:22:15 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50450 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236921AbiG1LUd (ORCPT ); Thu, 28 Jul 2022 07:20:33 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 1F22A683C4; Thu, 28 Jul 2022 04:19:39 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 45B3116CF; Thu, 28 Jul 2022 14:22:02 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 45B3116CF DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007322; bh=MT1vicVBKMErOF29vUfCHo0rtXuUWIvTz+zjXl8btBY=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=Gpi1x6iEoe7PdGKilas3oYKaOI4PHh1fngmc15buUAXpbrWbhYfb+IaMY26P7lDvb m2mDn1/M767LN9OGU7/Samrpgph7Fr5RIkQhcgpJ1x889eJFXysoY7/t+4ktyqYr9g WvSIyZtisjY8KwN5EPqy35MqYrWy9KmnJKthkUVY= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:37 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke , Serge Semin CC: Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 22/23] ata: ahci-dwc: Add Baikal-T1 AHCI SATA interface support Date: Thu, 28 Jul 2022 14:19:03 +0300 Message-ID: <20220728111905.12427-23-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org It's almost fully compatible DWC AHCI SATA IP-core derivative except the reference clocks source, which need to be very carefully selected. In particular the DWC AHCI SATA PHY can be clocked either from the pads ref_pad_clk_{m,p} or from the internal wires ref_alt_clk_{m,n}. In the later case the clock signal is generated from the Baikal-T1 CCU SATA PLL. The clocks source is selected by means of the ref_use_pad wire connected to the CCU SATA reference clock CSR. In normal situation it would be much more handy to use the internal reference clock source, but alas we haven't managed to make the AHCI controller working well with it so far. So it's preferable to have the controller clocked from the external clock generator and fallback to the internal clock source only as a last resort. Other than that the controller is full compatible with the DWC AHCI SATA IP-core. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke --- Changelog v2: - Rename 'syscon' property to 'baikal,bt1-syscon'. - Change the local objects prefix from 'dwc_ahci_' to 'ahci_dwc_', from 'bt1_ahci_' to 'ahci_bt1_'. (@Damien) Changelog v4: - Convert ahci_bt1_plat to being statically defined. (@kbot) - Drop Baikal-T1 syscon reference relying on the clock controller and the platform setup having the proper clock source selected. (@Rob) --- drivers/ata/Kconfig | 1 + drivers/ata/ahci_dwc.c | 55 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 675bb44144d3..79242d82c755 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -179,6 +179,7 @@ config AHCI_DM816 config AHCI_DWC tristate "Synopsys DWC AHCI SATA support" select SATA_HOST + select MFD_SYSCON if (MIPS_BAIKAL_T1 || COMPILE_TEST) help This option enables support for the Synopsys DWC AHCI SATA controller implementation. diff --git a/drivers/ata/ahci_dwc.c b/drivers/ata/ahci_dwc.c index 44a9bb7696ab..03a1af1c2b1f 100644 --- a/drivers/ata/ahci_dwc.c +++ b/drivers/ata/ahci_dwc.c @@ -13,10 +13,12 @@ #include #include #include +#include #include #include #include #include +#include #include "ahci.h" @@ -90,6 +92,20 @@ #define AHCI_DWC_PORT_PHYCR 0x74 #define AHCI_DWC_PORT_PHYSR 0x78 +/* Baikal-T1 AHCI SATA specific registers */ +#define AHCI_BT1_HOST_PHYCR AHCI_DWC_HOST_GPCR +#define AHCI_BT1_HOST_MPLM_MASK GENMASK(29, 23) +#define AHCI_BT1_HOST_LOSDT_MASK GENMASK(22, 20) +#define AHCI_BT1_HOST_CRR BIT(19) +#define AHCI_BT1_HOST_CRW BIT(18) +#define AHCI_BT1_HOST_CRCD BIT(17) +#define AHCI_BT1_HOST_CRCA BIT(16) +#define AHCI_BT1_HOST_CRDI_MASK GENMASK(15, 0) + +#define AHCI_BT1_HOST_PHYSR AHCI_DWC_HOST_GPSR +#define AHCI_BT1_HOST_CRA BIT(16) +#define AHCI_BT1_HOST_CRDO_MASK GENMASK(15, 0) + struct ahci_dwc_plat_data { unsigned int pflags; unsigned int hflags; @@ -106,6 +122,39 @@ struct ahci_dwc_host_priv { u32 dmacr[AHCI_MAX_PORTS]; }; +static int ahci_bt1_init(struct ahci_host_priv *hpriv) +{ + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + int ret; + + /* APB, application and reference clocks are required */ + if (!ahci_platform_find_clk(hpriv, "pclk") || + !ahci_platform_find_clk(hpriv, "aclk") || + !ahci_platform_find_clk(hpriv, "ref")) { + dev_err(&dpriv->pdev->dev, "No system clocks specified\n"); + return -EINVAL; + } + + /* + * Fully reset the SATA AXI and ref clocks domain to ensure the state + * machine is working from scratch especially if the reference clocks + * source has been changed. + */ + ret = ahci_platform_assert_rsts(hpriv); + if (ret) { + dev_err(&dpriv->pdev->dev, "Couldn't assert the resets\n"); + return ret; + } + + ret = ahci_platform_deassert_rsts(hpriv); + if (ret) { + dev_err(&dpriv->pdev->dev, "Couldn't de-assert the resets\n"); + return ret; + } + + return 0; +} + static struct ahci_host_priv *ahci_dwc_get_resources(struct platform_device *pdev) { struct ahci_dwc_host_priv *dpriv; @@ -416,9 +465,15 @@ static struct ahci_dwc_plat_data ahci_dwc_plat = { .pflags = AHCI_PLATFORM_GET_RESETS, }; +static struct ahci_dwc_plat_data ahci_bt1_plat = { + .pflags = AHCI_PLATFORM_GET_RESETS | AHCI_PLATFORM_RST_TRIGGER, + .init = ahci_bt1_init, +}; + static const struct of_device_id ahci_dwc_of_match[] = { { .compatible = "snps,dwc-ahci", &ahci_dwc_plat }, { .compatible = "snps,spear-ahci", &ahci_dwc_plat }, + { .compatible = "baikal,bt1-ahci", &ahci_bt1_plat }, {}, }; MODULE_DEVICE_TABLE(of, ahci_dwc_of_match); From patchwork Thu Jul 28 11:19:04 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1661598 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=mail header.b=ELMQ6K/u; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LtpCH3JB1z9sGC for ; Thu, 28 Jul 2022 21:22:19 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236927AbiG1LWN (ORCPT ); Thu, 28 Jul 2022 07:22:13 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47928 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236290AbiG1LUd (ORCPT ); Thu, 28 Jul 2022 07:20:33 -0400 Received: from mail.baikalelectronics.com (unknown [87.245.175.230]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 33D9867C9B; Thu, 28 Jul 2022 04:19:41 -0700 (PDT) Received: from mail (mail.baikal.int [192.168.51.25]) by mail.baikalelectronics.com (Postfix) with ESMTP id 3515616CC; Thu, 28 Jul 2022 14:22:03 +0300 (MSK) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.baikalelectronics.com 3515616CC DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baikalelectronics.ru; s=mail; t=1659007323; bh=oUSpaIhkvZGXowqh4vbRpzxbsFao5e19AluMuTh7ZdI=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=ELMQ6K/uTOG7q46raYJm3Z0pWlFSMZJcvcXEj4tBQlaukP3cgF/o/kzaWF9Lkj9cO QMa0t87tEE6ApYgYZU1SGz8wiIdoRwxikh8Iq+13qIObentksexvJ790Rwtd785A8q GYy+g8alSe2nf8UWFjOMwpX3c24nruEmxuFfHVRA= Received: from localhost (192.168.53.207) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Thu, 28 Jul 2022 14:19:38 +0300 From: Serge Semin To: Damien Le Moal , Hans de Goede , Jens Axboe , Hannes Reinecke CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Rob Herring , , , Subject: [PATCH RESEND v6 23/23] MAINTAINERS: Add maintainers for DWC AHCI SATA driver Date: Thu, 28 Jul 2022 14:19:04 +0300 Message-ID: <20220728111905.12427-24-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> References: <20220728111905.12427-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,T_SPF_PERMERROR autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Add myself as a maintainer of the new DWC AHCI SATA driver and its DT-bindings schema. Signed-off-by: Serge Semin --- Changelog v2: - Use dlemoal/libata.git git tree for the LIBATA SATA AHCI SYNOPSYS DWC driver (@Damien). --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 3cf9842d9233..61a0218a3d27 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11255,6 +11255,15 @@ F: drivers/ata/ahci_platform.c F: drivers/ata/libahci_platform.c F: include/linux/ahci_platform.h +LIBATA SATA AHCI SYNOPSYS DWC CONTROLLER DRIVER +M: Serge Semin +L: linux-ide@vger.kernel.org +S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata.git +F: Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml +F: Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml +F: drivers/ata/ahci_dwc.c + LIBATA SATA PROMISE TX2/TX4 CONTROLLER DRIVER M: Mikael Pettersson L: linux-ide@vger.kernel.org