From patchwork Fri Jul 15 03:04:18 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ira Weiny X-Patchwork-Id: 1656723 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=intel.com header.i=@intel.com header.a=rsa-sha256 header.s=Intel header.b=DI7LrxBO; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Lkbn34wVbz9s09 for ; Fri, 15 Jul 2022 13:04:39 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241211AbiGODEi (ORCPT ); Thu, 14 Jul 2022 23:04:38 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33348 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241190AbiGODEg (ORCPT ); Thu, 14 Jul 2022 23:04:36 -0400 Received: from mga05.intel.com (mga05.intel.com [192.55.52.43]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C3C1F6D9E5; Thu, 14 Jul 2022 20:04:35 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1657854275; x=1689390275; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=CIzVUNVWr6BnPVOqtfdAEOoTe2cMGpIyqjYMmya25/Y=; b=DI7LrxBOkZKcJEbNG7itGGrsFx3FH//rTx9mwqvT1RgCRbOZKxxAdOfu ahRyFv2QgWkzi9j5vHsoyT1RUZ6k1x8JkFj9wyzxFsEw50PSeMAph+kmt XlMqrTYzoMUwZl3WW0kGNQczMpaIfh4VDa/mQuvB2qYc5vl0OXZIG65Xi WwM24wLdA7QA66wNek9rEZhHy4EHOnOo4Fm8QqERK9g0fdeLU6guDtIrx H7LzPfjrbU+r5FQCKFpLCXkhnMHtTZ/lwyh29yAV3BNiuBzJcJEm2dzmt n1UthVLHT0JkygDgAmn5hj9VCZ8N1sdUrcXYk1xzkmYMY/sy4ICQiiihu A==; X-IronPort-AV: E=McAfee;i="6400,9594,10408"; a="372003588" X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="372003588" Received: from orsmga003.jf.intel.com ([10.7.209.27]) by fmsmga105.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:04:35 -0700 X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="546503573" Received: from mbordone-mobl.amr.corp.intel.com (HELO localhost) ([10.255.5.217]) by orsmga003-auth.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:04:32 -0700 From: ira.weiny@intel.com To: Dan Williams , Bjorn Helgaas , Jonathan Cameron Cc: Davidlohr Bueso , Lukas Wunner , Alison Schofield , Vishal Verma , Ira Weiny , Dave Jiang , Ben Widawsky , linux-kernel@vger.kernel.org, linux-cxl@vger.kernel.org, linux-pci@vger.kernel.org Subject: [PATCH V14 1/7] PCI: Add vendor ID for the PCI SIG Date: Thu, 14 Jul 2022 20:04:18 -0700 Message-Id: <20220715030424.462963-2-ira.weiny@intel.com> X-Mailer: git-send-email 2.35.3 In-Reply-To: <20220715030424.462963-1-ira.weiny@intel.com> References: <20220715030424.462963-1-ira.weiny@intel.com> MIME-Version: 1.0 X-Spam-Status: No, score=-5.0 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED, SPF_HELO_NONE,SPF_NONE,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Jonathan Cameron This ID is used in DOE headers to identify protocols that are defined within the PCI Express Base Specification, PCIe r6.0, sec 6.30.1.1 table 6-32. Acked-by: Bjorn Helgaas Reviewed-by: Davidlohr Bueso Reviewed-by: Dan Williams Signed-off-by: Jonathan Cameron --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 0178823ce8c2..8af3b86206b1 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -151,6 +151,7 @@ #define PCI_CLASS_OTHERS 0xff /* Vendors and devices. Sort key: vendor first, device next. */ +#define PCI_VENDOR_ID_PCI_SIG 0x0001 #define PCI_VENDOR_ID_LOONGSON 0x0014 From patchwork Fri Jul 15 03:04:19 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ira Weiny X-Patchwork-Id: 1656724 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=intel.com header.i=@intel.com header.a=rsa-sha256 header.s=Intel header.b=DieyfJYb; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LkbnG36FXz9s09 for ; Fri, 15 Jul 2022 13:04:50 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241261AbiGODEs (ORCPT ); Thu, 14 Jul 2022 23:04:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33512 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241230AbiGODEl (ORCPT ); Thu, 14 Jul 2022 23:04:41 -0400 Received: from mga18.intel.com (mga18.intel.com [134.134.136.126]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9F7E37694E; Thu, 14 Jul 2022 20:04:40 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1657854280; x=1689390280; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=HCbJLPfxlxI92iZKFv4/AkOuve50aUnNogOmoa9pIRI=; b=DieyfJYbGkFynsEdraa00+3cj66i3dfkc5ImKBEdCVxUnKKnpLV9F/JK cj5+q6W4Wk7g+Q4/rKQkPFUwZyD3oLXMzkseLeGT7CipTc7Tu/UrnPoZ9 hnPXbkIx/4LwZc5ULsQckIv4Mjy4a0etcyFjXm3Xf+CH4grZCJuw7QIkS Tcd3ymYLQ35zZWP910u0DIeLep0DV7jfUi1L24OJlTpg+sQXVKLbAj8qO FVlXl6ZBO80LDPBJTwU2aydNEMrpWxBpsKiW9qW8WLx3MJLpQw3XvA1yH lPIsqCxQBGRK7bmMBHruMy+T3Bwd6v0asQXovo2jRfvtIIlysqTZ2j0Rc w==; X-IronPort-AV: E=McAfee;i="6400,9594,10408"; a="268713301" X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="268713301" Received: from fmsmga002.fm.intel.com ([10.253.24.26]) by orsmga106.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:04:40 -0700 X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="699038301" Received: from mbordone-mobl.amr.corp.intel.com (HELO localhost) ([10.255.5.217]) by fmsmga002-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:04:37 -0700 From: ira.weiny@intel.com To: Dan Williams , Bjorn Helgaas , Jonathan Cameron Cc: Ira Weiny , Davidlohr Bueso , Lukas Wunner , Alison Schofield , Vishal Verma , Dave Jiang , Ben Widawsky , linux-kernel@vger.kernel.org, linux-cxl@vger.kernel.org, linux-pci@vger.kernel.org Subject: [PATCH V14 2/7] PCI: Replace magic constant for PCI Sig Vendor ID Date: Thu, 14 Jul 2022 20:04:19 -0700 Message-Id: <20220715030424.462963-3-ira.weiny@intel.com> X-Mailer: git-send-email 2.35.3 In-Reply-To: <20220715030424.462963-1-ira.weiny@intel.com> References: <20220715030424.462963-1-ira.weiny@intel.com> MIME-Version: 1.0 X-Spam-Status: No, score=-2.7 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE, SPF_NONE,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Ira Weiny Replace the magic value in pci_bus_crs_vendor_id() with PCI_VENDOR_ID_PCI_SIG. Reviewed-by: Dan Williams Reviewed-by: Davidlohr Bueso Suggested-by: Bjorn Helgaas Acked-by: Bjorn Helgaas Signed-off-by: Ira Weiny --- Changes from V6 Simplify commit message --- drivers/pci/probe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 17a969942d37..6280e780a48c 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -2312,7 +2312,7 @@ EXPORT_SYMBOL(pci_alloc_dev); static bool pci_bus_crs_vendor_id(u32 l) { - return (l & 0xffff) == 0x0001; + return (l & 0xffff) == PCI_VENDOR_ID_PCI_SIG; } static bool pci_bus_wait_crs(struct pci_bus *bus, int devfn, u32 *l, From patchwork Fri Jul 15 03:04:20 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ira Weiny X-Patchwork-Id: 1656726 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=intel.com header.i=@intel.com header.a=rsa-sha256 header.s=Intel header.b=jQ/P3ZdW; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LkbnZ4MXvz9s09 for ; Fri, 15 Jul 2022 13:05:06 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241229AbiGODFD (ORCPT ); Thu, 14 Jul 2022 23:05:03 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33880 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241275AbiGODEw (ORCPT ); Thu, 14 Jul 2022 23:04:52 -0400 Received: from mga09.intel.com (mga09.intel.com [134.134.136.24]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7D0E976E80; Thu, 14 Jul 2022 20:04:48 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1657854288; x=1689390288; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=6fczcaDh+UO9Mfv+J8uhq2dceSDpyjhCo+fI2FLjNjY=; b=jQ/P3ZdWFu06NfBBhQCEKm118zAGlnQR3FGQi3cA306yOqbH/buUL3jH pllvGBKGzrbWPCgsHFd0BbjZ+JU9LantcLwvhkTGcIdXlia8cajqtjId7 uAEkHguGM6YYlW7zSjj43B1paItEYUHDeAIVKIRqNshWZV/Zwd1IoEQeR K56Wy02pcqKyKz8xSMokP8dnMMNuFh+5Z4epzxGtu98WA/jRY6bEJZNMe jvaBQ+P+8dICgB6ZtlzdixkJRUnb936HJ9WCccMNsTnwaXcA4Hr37Mwr1 HNCA4Vy0Gn1YPPnuD4qwtm0XcNxafKYSfgBz0vmat7Onh0+IYFXHEcK6y w==; X-IronPort-AV: E=McAfee;i="6400,9594,10408"; a="286427202" X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="286427202" Received: from orsmga008.jf.intel.com ([10.7.209.65]) by orsmga102.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:04:44 -0700 X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="623678624" Received: from mbordone-mobl.amr.corp.intel.com (HELO localhost) ([10.255.5.217]) by orsmga008-auth.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:04:41 -0700 From: ira.weiny@intel.com To: Dan Williams , Bjorn Helgaas , Jonathan Cameron Cc: "Li, Ming" , Bjorn Helgaas , Matthew Wilcox , Ira Weiny , Lukas Wunner , Alison Schofield , Vishal Verma , Dave Jiang , Ben Widawsky , linux-kernel@vger.kernel.org, linux-cxl@vger.kernel.org, linux-pci@vger.kernel.org Subject: [PATCH V14 3/7] PCI/DOE: Add DOE mailbox support functions Date: Thu, 14 Jul 2022 20:04:20 -0700 Message-Id: <20220715030424.462963-4-ira.weiny@intel.com> X-Mailer: git-send-email 2.35.3 In-Reply-To: <20220715030424.462963-1-ira.weiny@intel.com> References: <20220715030424.462963-1-ira.weiny@intel.com> MIME-Version: 1.0 X-Spam-Status: No, score=-5.0 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED, RCVD_IN_MSPIKE_H3,RCVD_IN_MSPIKE_WL,SPF_HELO_NONE,SPF_NONE, T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Jonathan Cameron Introduced in a PCIe r6.0, sec 6.30, DOE provides a config space based mailbox with standard protocol discovery. Each mailbox is accessed through a DOE Extended Capability. Each DOE mailbox must support the DOE discovery protocol in addition to any number of additional protocols. Define core PCIe functionality to manage a single PCIe DOE mailbox at a defined config space offset. Functionality includes iterating, creating, query of supported protocol, and task submission. Destruction of the mailboxes is device managed. Cc: "Li, Ming" Cc: Bjorn Helgaas Cc: Matthew Wilcox Acked-by: Bjorn Helgaas Signed-off-by: Jonathan Cameron Co-developed-by: Ira Weiny Signed-off-by: Ira Weiny --- Changes from V13.1 Clean up docs Dan: pass up pci_doe_wait() error use dev_err_ratelimited Remove extra '{' pass up xa_insert() return code Use pci_name() and dev_driver_string() to name WQ Changes from V13 Bjorn: Update commit message Put fmt strings on same line as pci_err s/successful/successfully Clean up line wrap on comments Matthew: Fix up shifting in xa_mk_value() Changes from V12 Remove busy retries s/pci_doe_xa_entry/pci_doe_xa_prot_entry Open code pci_doe_abort call s/ABORT/CANCEL Clarify canceling a task by using a cancel flag instead of 'abort' flag Clean up comments Jonathan: use xa_mk_value() for XArray value spaces around '-' operator s/possitive/positive s/pci_doe_issue_abort/pci_doe_abort Remove pci_doe_free_mb() and use devm_* exclusively in pci_doe_create_mb() s/ret/rc to be consistent Remove irq support. Clean up timeout values and ensure waits values are correct Remove unnecessary arm_wait function Changes from V11 Bjorn: s/PCI/PCIe use dev_fmt move cap_offset in struct pci_doe_mb use break and return from a central place fix interrupt prints s/PCI_DOE_CAP_IRQ/PCI_DOE_CAP_INT_MSG_NUM s/irq_msg_num/int_msg_num when the value is not an irq but rather the interrupt message number for the DOE s/irq/IRQ in comments Clarify request and response payload size units In addition clarify the rv units Check for invalid response payload size (must be at least 1 DW) Dan: s/EOPNOTSUPP/ENXIO/ Add pci_doe_for_each_off to .clang-format use xarray for supported protocols s/pci_doe_create_mb/pcim_doe_create_mb/ Remove pci_doe_destroy_mb Dan: Convert the statemachine to process tasks as work items Define pci_doe_write_ctrl() Introduce pci_doe_irq_enabled() issue a stand alone abort Don't go through the state machine for the abort. Just poll/irq until the response comes back. Remove Wait Abort state A wait abort can just be triggered from outside and stop the state machine from whatever loop it may be in. Let the state machine issue the abort itself and wait for it to return or not. Remove Wait abort on error Issue the abort directly before returning. Abort failure will flag the MB dead. Remove workqueue processing from state machine clean up function locations in the file Move abort flag/document it React to an abort while aborting and bail. This will mark the mailbox dead. Convert task to a work item Create a workqueue in the mailbox. Remove cur_task and locking. Set DEAD when taking mailbox down. print error on marking mailbox dead Introduce signal_task_abort flatten out the state machine Changes from V9 Lukas Wunner Update comments Move private doe structures and defines from pci-doe.h to doe.c check Data Obj Ready prior to last ack Davidlohr make task_lock a spinlock Lukas/Jonathan Remove special case of error in irq handler Fix potential race with the scheduling of a task when one is ending. The current task can't be retired until the state machine is idle. Otherwise a new task work item may run and the state machine would be out of sync. Changes from V8 Remove Bjorn's ack Expose a function to find the irq number for a mailbox based on offset. This is the code Jonathan proposed for finding the irq number here: https://lore.kernel.org/linux-cxl/20220503153449.4088-2-Jonathan.Cameron@huawei.com/ This removes funky bool parameter to create. Move pci_set_master() within the pci_doe_enable_irq() Per Bjorn Clean up commit messages move pci-doe.c to doe.c Clean up PCI spec references Ensure all messages use pci_*() Add offset to error messages to distinguish mailboxes use hex for DOE offsets Print 4 nibbles for Vendor ID and 2 for type. s/irq/IRQ in comments Fix long lines Fix typos Changes from V7 Add a Kconfig for this functionality Fix bug in pci_doe_supports_prot() Rebased on cxl-pending Changes from V6 Clean up signed off by lines Make this functionality all PCI library functions Clean up header files s/pci_doe_irq/pci_doe_irq_handler Use pci_{request,free}_irq Remove irq_name (maintained by pci_request_irq) Fix checks to use an irq Consistently use u16 for cap_offset Cleanup kdocs and comments Create a helper retire_cur_task() to handle locking of the current task pointer. Remove devm_ calls from PCI layer. The devm_ calls do not allow for the pci_doe_mb objects to be tied to an auxiliary device. Leave it to the caller to use devm_ if desired. From Dan Williams s/cb/end_task/; Pass pci_doe_task to end_task Clarify exchange/task/request/response. Merge pci_doe_task and pci_doe_exchange into pci_doe_task which represents a single request/response task for the state machine to process. Simplify submitting work to the mailbox Replace pci_doe_exchange_sync() with pci_doe_submit_task() Consumers of the mailbox are now responsible for setting up callbacks within a task object and submitting them to the mailbox to be processed. Remove WARN_ON when task != NULL and be sure to abort that task. Convert abort/dead to atomic flags s/state_lock/task_lock to better define what the lock is protecting Remove all the auxiliary bus code from the PCI layer The PCI layer provides helpers to use the DOE Mailboxes. Each subsystem can then use the helpers as they see fit. The CXL layer in this series uses aux devices to manage the new pci_doe_mb objects. From Bjorn Clarify the fact that DOE mailboxes are capabilities of the device. Code clean ups Cleanup Makefile Update references to PCI SIG spec v6.0 Move this attribution here: This code is based on Jonathan's V4 series here: https://lore.kernel.org/linux-cxl/20210524133938.2815206-1-Jonathan.Cameron@huawei.com/ Changes from V5 From Bjorn s/pci_WARN/pci_warn Add timeout period to print Trim to 80 chars Use Tabs for DOE define spacing Use %#x for clarity From Jonathan Addresses concerns about the order of unwinding stuff s/doe/doe_dev in pci_doe_exhcnage_sync Correct kernel Doc comment Move pci_doe_task_complete() down in the file. Rework pci_doe_irq() process STATUS_ERROR first Return IRQ_NONE if the irq is not processed Use PCI_DOE_STATUS_INT_STATUS explicitly to clear the irq Clean up goto label s/err_free_irqs/err_free_irq use devm_kzalloc for doe struct clean up error paths in pci_doe_probe s/pci_doe_drv/pci_doe remove include mutex.h remove device name and define, move it in the next patch which uses it use devm_kasprintf() for irq_name use devm_request_irq() remove pci_doe_unregister() [get/put]_device() were unneeded and with the use of devm_* this function can be removed completely. refactor pci_doe_register and s/pci_doe_register/pci_doe_reg_irq make this function just a registration of the irq and move pci_doe_abort() into pci_doe_probe() use devm_* to allocate the protocol array Changes from Jonathan's V4 Move the DOE MB code into the DOE auxiliary driver Remove Task List in favor of a wait queue Changes from Ben remove CXL references propagate rc from pci functions on error --- .clang-format | 1 + drivers/pci/Kconfig | 3 + drivers/pci/Makefile | 1 + drivers/pci/doe.c | 546 ++++++++++++++++++++++++++++++++++ include/linux/pci-doe.h | 79 +++++ include/uapi/linux/pci_regs.h | 29 +- 6 files changed, 658 insertions(+), 1 deletion(-) create mode 100644 drivers/pci/doe.c create mode 100644 include/linux/pci-doe.h diff --git a/.clang-format b/.clang-format index 9b87ea1fc16e..1247d54f9e49 100644 --- a/.clang-format +++ b/.clang-format @@ -516,6 +516,7 @@ ForEachMacros: - 'of_property_for_each_string' - 'of_property_for_each_u32' - 'pci_bus_for_each_resource' + - 'pci_doe_for_each_off' - 'pcl_for_each_chunk' - 'pcl_for_each_segment' - 'pcm_for_each_format' diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 133c73207782..b2f2e588a817 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -121,6 +121,9 @@ config XEN_PCIDEV_FRONTEND config PCI_ATS bool +config PCI_DOE + bool + config PCI_ECAM bool diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 0da6b1ebc694..2680e4c92f0a 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_PCI_ECAM) += ecam.o obj-$(CONFIG_PCI_P2PDMA) += p2pdma.o obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o obj-$(CONFIG_VGA_ARB) += vgaarb.o +obj-$(CONFIG_PCI_DOE) += doe.o # Endpoint library must be initialized before its users obj-$(CONFIG_PCI_ENDPOINT) += endpoint/ diff --git a/drivers/pci/doe.c b/drivers/pci/doe.c new file mode 100644 index 000000000000..12c3762be22f --- /dev/null +++ b/drivers/pci/doe.c @@ -0,0 +1,546 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Data Object Exchange + * PCIe r6.0, sec 6.30 DOE + * + * Copyright (C) 2021 Huawei + * Jonathan Cameron + * + * Copyright (C) 2022 Intel Corporation + * Ira Weiny + */ + +#define dev_fmt(fmt) "DOE: " fmt + +#include +#include +#include +#include +#include +#include +#include + +#define PCI_DOE_PROTOCOL_DISCOVERY 0 + +#define PCI_DOE_BUSY_MAX_RETRIES 16 + +/* Timeout of 1 second from 6.30.2 Operation, PCI Spec r6.0 */ +#define PCI_DOE_TIMEOUT HZ +#define PCI_DOE_POLL_INTERVAL (PCI_DOE_TIMEOUT / 128) + +#define PCI_DOE_FLAG_CANCEL 0 +#define PCI_DOE_FLAG_DEAD 1 + +/** + * struct pci_doe_mb - State for a single DOE mailbox + * + * This state is used to manage a single DOE mailbox capability. All fields + * should be considered opaque to the consumers and the structure passed into + * the helpers below after being created by devm_pci_doe_create() + * + * @pdev: PCI device this mailbox belongs to + * @cap_offset: Capability offset + * @prots: Array of protocols supported (encoded as long values) + * @wq: Wait queue for work item + * @work_queue: Queue of pci_doe_work items + * @flags: Bit array of PCI_DOE_FLAG_* flags + */ +struct pci_doe_mb { + struct pci_dev *pdev; + u16 cap_offset; + struct xarray prots; + + wait_queue_head_t wq; + struct workqueue_struct *work_queue; + unsigned long flags; +}; + +static int pci_doe_wait(struct pci_doe_mb *doe_mb, unsigned long timeout) +{ + if (wait_event_timeout(doe_mb->wq, + test_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags), + timeout)) + return -EIO; + return 0; +} + +static void pci_doe_write_ctrl(struct pci_doe_mb *doe_mb, u32 val) +{ + struct pci_dev *pdev = doe_mb->pdev; + int offset = doe_mb->cap_offset; + + pci_write_config_dword(pdev, offset + PCI_DOE_CTRL, val); +} + +static int pci_doe_abort(struct pci_doe_mb *doe_mb) +{ + struct pci_dev *pdev = doe_mb->pdev; + int offset = doe_mb->cap_offset; + unsigned long timeout_jiffies; + + pci_dbg(pdev, "[%x] Issuing Abort\n", offset); + + timeout_jiffies = jiffies + PCI_DOE_TIMEOUT; + pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_ABORT); + + do { + int rc; + u32 val; + + rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL); + if (rc) + return rc; + pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); + + /* Abort success! */ + if (!FIELD_GET(PCI_DOE_STATUS_ERROR, val) && + !FIELD_GET(PCI_DOE_STATUS_BUSY, val)) + return 0; + + } while (!time_after(jiffies, timeout_jiffies)); + + /* Abort has timed out and the MB is dead */ + pci_err(pdev, "[%x] ABORT timed out\n", offset); + return -EIO; +} + +static int pci_doe_send_req(struct pci_doe_mb *doe_mb, + struct pci_doe_task *task) +{ + struct pci_dev *pdev = doe_mb->pdev; + int offset = doe_mb->cap_offset; + u32 val; + int i; + + /* + * Check the DOE busy bit is not set. If it is set, this could indicate + * someone other than Linux (e.g. firmware) is using the mailbox. Note + * it is expected that firmware and OS will negotiate access rights via + * an, as yet to be defined method. + */ + pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); + if (FIELD_GET(PCI_DOE_STATUS_BUSY, val)) + return -EBUSY; + + if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) + return -EIO; + + /* Write DOE Header */ + val = FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_VID, task->prot.vid) | + FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, task->prot.type); + pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val); + /* Length is 2 DW of header + length of payload in DW */ + pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, + FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, + 2 + task->request_pl_sz / + sizeof(u32))); + for (i = 0; i < task->request_pl_sz / sizeof(u32); i++) + pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, + task->request_pl[i]); + + pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_GO); + + /* Request is sent - now wait for poll or IRQ */ + return 0; +} + +static bool pci_doe_data_obj_ready(struct pci_doe_mb *doe_mb) +{ + struct pci_dev *pdev = doe_mb->pdev; + int offset = doe_mb->cap_offset; + u32 val; + + pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); + if (FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) + return true; + return false; +} + +static int pci_doe_recv_resp(struct pci_doe_mb *doe_mb, struct pci_doe_task *task) +{ + struct pci_dev *pdev = doe_mb->pdev; + int offset = doe_mb->cap_offset; + size_t length, payload_length; + u32 val; + int i; + + /* Read the first dword to get the protocol */ + pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); + if ((FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val) != task->prot.vid) || + (FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val) != task->prot.type)) { + dev_err_ratelimited(&pdev->dev, "[%x] expected [VID, Protocol] = [%04x, %02x], got [%04x, %02x]\n", + doe_mb->cap_offset, task->prot.vid, task->prot.type, + FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val), + FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val)); + return -EIO; + } + + pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); + /* Read the second dword to get the length */ + pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); + pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); + + length = FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, val); + if (length > SZ_1M || length < 2) + return -EIO; + + /* First 2 dwords have already been read */ + length -= 2; + payload_length = min(length, task->response_pl_sz / sizeof(u32)); + /* Read the rest of the response payload */ + for (i = 0; i < payload_length; i++) { + pci_read_config_dword(pdev, offset + PCI_DOE_READ, + &task->response_pl[i]); + /* Prior to the last ack, ensure Data Object Ready */ + if (i == (payload_length - 1) && !pci_doe_data_obj_ready(doe_mb)) + return -EIO; + pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); + } + + /* Flush excess length */ + for (; i < length; i++) { + pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); + pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); + } + + /* Final error check to pick up on any since Data Object Ready */ + pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); + if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) + return -EIO; + + return min(length, task->response_pl_sz / sizeof(u32)) * sizeof(u32); +} + +static void signal_task_complete(struct pci_doe_task *task, int rv) +{ + task->rv = rv; + task->complete(task); +} + +static void signal_task_abort(struct pci_doe_task *task, int rv) +{ + struct pci_doe_mb *doe_mb = task->doe_mb; + struct pci_dev *pdev = doe_mb->pdev; + + if (pci_doe_abort(doe_mb)) { + /* + * If the device can't process an abort; set the mailbox dead + * - no more submissions + */ + pci_err(pdev, "[%x] Abort failed marking mailbox dead\n", + doe_mb->cap_offset); + set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags); + } + signal_task_complete(task, rv); +} + +static void doe_statemachine_work(struct work_struct *work) +{ + struct pci_doe_task *task = container_of(work, struct pci_doe_task, + work); + struct pci_doe_mb *doe_mb = task->doe_mb; + struct pci_dev *pdev = doe_mb->pdev; + int offset = doe_mb->cap_offset; + unsigned long timeout_jiffies; + u32 val; + int rc; + + if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) { + signal_task_complete(task, -EIO); + return; + } + + /* Send request */ + rc = pci_doe_send_req(doe_mb, task); + + if (rc) { + /* + * The specification does not provide any guidance on how to + * resolve conflicting requests from other entities. + * Furthermore, it is likely that busy will not be detected + * most of the time. Flag any detection of status busy with an + * error. + */ + if (rc == -EBUSY) + dev_err_ratelimited(&pdev->dev, "[%x] busy detected; another entity is sending conflicting requests\n", + offset); + signal_task_abort(task, rc); + return; + } + + timeout_jiffies = jiffies + PCI_DOE_TIMEOUT; + rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL); + if (rc) { + signal_task_abort(task, rc); + return; + } + + /* Poll for response */ +retry_resp: + pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); + if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) { + signal_task_abort(task, -EIO); + return; + } + + if (!FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) { + if (time_after(jiffies, timeout_jiffies)) { + signal_task_abort(task, -EIO); + return; + } + rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL); + if (rc) { + signal_task_abort(task, rc); + return; + } + goto retry_resp; + } + + rc = pci_doe_recv_resp(doe_mb, task); + if (rc < 0) { + signal_task_abort(task, rc); + return; + } + + signal_task_complete(task, rc); +} + +static void pci_doe_task_complete(struct pci_doe_task *task) +{ + complete(task->private); +} + +static int pci_doe_discovery(struct pci_doe_mb *doe_mb, u8 *index, u16 *vid, + u8 *protocol) +{ + u32 request_pl = FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX, + *index); + u32 response_pl; + DECLARE_COMPLETION_ONSTACK(c); + struct pci_doe_task task = { + .prot.vid = PCI_VENDOR_ID_PCI_SIG, + .prot.type = PCI_DOE_PROTOCOL_DISCOVERY, + .request_pl = &request_pl, + .request_pl_sz = sizeof(request_pl), + .response_pl = &response_pl, + .response_pl_sz = sizeof(response_pl), + .complete = pci_doe_task_complete, + .private = &c, + }; + int rc; + + rc = pci_doe_submit_task(doe_mb, &task); + if (rc < 0) + return rc; + + wait_for_completion(&c); + + if (task.rv != sizeof(response_pl)) + return -EIO; + + *vid = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID, response_pl); + *protocol = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL, + response_pl); + *index = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX, + response_pl); + + return 0; +} + +static void *pci_doe_xa_prot_entry(u16 vid, u8 prot) +{ + return xa_mk_value((vid << 8) | prot); +} + +static int pci_doe_cache_protocols(struct pci_doe_mb *doe_mb) +{ + u8 index = 0; + u8 xa_idx = 0; + + do { + int rc; + u16 vid; + u8 prot; + + rc = pci_doe_discovery(doe_mb, &index, &vid, &prot); + if (rc) + return rc; + + pci_dbg(doe_mb->pdev, + "[%x] Found protocol %d vid: %x prot: %x\n", + doe_mb->cap_offset, xa_idx, vid, prot); + + rc = xa_insert(&doe_mb->prots, xa_idx++, + pci_doe_xa_prot_entry(vid, prot), GFP_KERNEL); + if (rc) + return rc; + } while (index); + + return 0; +} + +static void pci_doe_xa_destroy(void *mb) +{ + struct pci_doe_mb *doe_mb = mb; + + xa_destroy(&doe_mb->prots); +} + +static void pci_doe_destroy_workqueue(void *mb) +{ + struct pci_doe_mb *doe_mb = mb; + + destroy_workqueue(doe_mb->work_queue); +} + +static void pci_doe_flush_mb(void *mb) +{ + struct pci_doe_mb *doe_mb = mb; + + /* Stop all pending work items from starting */ + set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags); + + /* Cancel an in progress work item, if necessary */ + set_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags); + wake_up(&doe_mb->wq); + + /* Flush all work items */ + flush_workqueue(doe_mb->work_queue); +} + +/** + * pcim_doe_create_mb() - Create a DOE mailbox object + * + * @pdev: PCI device to create the DOE mailbox for + * @cap_offset: Offset of the DOE mailbox + * + * Create a single mailbox object to manage the mailbox protocol at the + * cap_offset specified. + * + * RETURNS: created mailbox object on success + * ERR_PTR(-errno) on failure + */ +struct pci_doe_mb *pcim_doe_create_mb(struct pci_dev *pdev, u16 cap_offset) +{ + struct pci_doe_mb *doe_mb; + struct device *dev = &pdev->dev; + int rc; + + doe_mb = devm_kzalloc(dev, sizeof(*doe_mb), GFP_KERNEL); + if (!doe_mb) + return ERR_PTR(-ENOMEM); + + doe_mb->pdev = pdev; + doe_mb->cap_offset = cap_offset; + init_waitqueue_head(&doe_mb->wq); + + xa_init(&doe_mb->prots); + rc = devm_add_action(dev, pci_doe_xa_destroy, doe_mb); + if (rc) + return ERR_PTR(rc); + + doe_mb->work_queue = alloc_ordered_workqueue("%s %s DOE [%x]", 0, + dev_driver_string(&pdev->dev), + pci_name(pdev), + doe_mb->cap_offset); + if (!doe_mb->work_queue) { + pci_err(pdev, "[%x] failed to allocate work queue\n", + doe_mb->cap_offset); + return ERR_PTR(-ENOMEM); + } + rc = devm_add_action_or_reset(dev, pci_doe_destroy_workqueue, doe_mb); + if (rc) + return ERR_PTR(rc); + + /* Reset the mailbox by issuing an abort */ + rc = pci_doe_abort(doe_mb); + if (rc) { + pci_err(pdev, "[%x] failed to reset mailbox with abort command : %d\n", + doe_mb->cap_offset, rc); + return ERR_PTR(rc); + } + + /* + * The state machine and the mailbox should be in sync now; + * Set up mailbox flush prior to using the mailbox to query protocols. + */ + rc = devm_add_action_or_reset(dev, pci_doe_flush_mb, doe_mb); + if (rc) + return ERR_PTR(rc); + + rc = pci_doe_cache_protocols(doe_mb); + if (rc) { + pci_err(pdev, "[%x] failed to cache protocols : %d\n", + doe_mb->cap_offset, rc); + return ERR_PTR(rc); + } + + return doe_mb; +} +EXPORT_SYMBOL_GPL(pcim_doe_create_mb); + +/** + * pci_doe_supports_prot() - Return if the DOE instance supports the given + * protocol + * @doe_mb: DOE mailbox capability to query + * @vid: Protocol Vendor ID + * @type: Protocol type + * + * RETURNS: True if the DOE mailbox supports the protocol specified + */ +bool pci_doe_supports_prot(struct pci_doe_mb *doe_mb, u16 vid, u8 type) +{ + unsigned long index; + void *entry; + + /* The discovery protocol must always be supported */ + if (vid == PCI_VENDOR_ID_PCI_SIG && type == PCI_DOE_PROTOCOL_DISCOVERY) + return true; + + xa_for_each(&doe_mb->prots, index, entry) + if (entry == pci_doe_xa_prot_entry(vid, type)) + return true; + + return false; +} +EXPORT_SYMBOL_GPL(pci_doe_supports_prot); + +/** + * pci_doe_submit_task() - Submit a task to be processed by the state machine + * + * @doe_mb: DOE mailbox capability to submit to + * @task: task to be queued + * + * Submit a DOE task (request/response) to the DOE mailbox to be processed. + * Returns upon queueing the task object. If the queue is full this function + * will sleep until there is room in the queue. + * + * task->complete will be called when the state machine is done processing this + * task. + * + * Excess data will be discarded. + * + * RETURNS: 0 when task has been successfully queued, -ERRNO on error + */ +int pci_doe_submit_task(struct pci_doe_mb *doe_mb, struct pci_doe_task *task) +{ + if (!pci_doe_supports_prot(doe_mb, task->prot.vid, task->prot.type)) + return -EINVAL; + + /* + * DOE requests must be a whole number of DW and the response needs to + * be big enough for at least 1 DW + */ + if (task->request_pl_sz % sizeof(u32) || + task->response_pl_sz < sizeof(u32)) + return -EINVAL; + + if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) + return -EIO; + + task->doe_mb = doe_mb; + INIT_WORK(&task->work, doe_statemachine_work); + queue_work(doe_mb->work_queue, &task->work); + return 0; +} +EXPORT_SYMBOL_GPL(pci_doe_submit_task); diff --git a/include/linux/pci-doe.h b/include/linux/pci-doe.h new file mode 100644 index 000000000000..c77f6258c996 --- /dev/null +++ b/include/linux/pci-doe.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Data Object Exchange + * PCIe r6.0, sec 6.30 DOE + * + * Copyright (C) 2021 Huawei + * Jonathan Cameron + * + * Copyright (C) 2022 Intel Corporation + * Ira Weiny + */ + +#ifndef LINUX_PCI_DOE_H +#define LINUX_PCI_DOE_H + +#include + +struct pci_doe_protocol { + u16 vid; + u8 type; +}; + +struct pci_doe_mb; + +/** + * struct pci_doe_task - represents a single query/response + * + * @prot: DOE Protocol + * @request_pl: The request payload + * @request_pl_sz: Size of the request payload (bytes) + * @response_pl: The response payload + * @response_pl_sz: Size of the response payload (bytes) + * @rv: Return value. Length of received response or error (bytes) + * @complete: Called when task is complete + * @private: Private data for the consumer + * @work: Used internally by the mailbox + * @doe_mb: Used internally by the mailbox + * + * The payload sizes and rv are specified in bytes with the following + * restrictions concerning the protocol. + * + * 1) The request_pl_sz must be a multiple of double words (4 bytes) + * 2) The response_pl_sz must be >= a single double word (4 bytes) + * 3) rv is returned as bytes but it will be a multiple of double words + * + * NOTE there is no need for the caller to initialize work or doe_mb. + */ +struct pci_doe_task { + struct pci_doe_protocol prot; + u32 *request_pl; + size_t request_pl_sz; + u32 *response_pl; + size_t response_pl_sz; + int rv; + void (*complete)(struct pci_doe_task *task); + void *private; + + /* No need for the user to initialize these fields */ + struct work_struct work; + struct pci_doe_mb *doe_mb; +}; + +/** + * pci_doe_for_each_off - Iterate each DOE capability + * @pdev: struct pci_dev to iterate + * @off: u16 of config space offset of each mailbox capability found + */ +#define pci_doe_for_each_off(pdev, off) \ + for (off = pci_find_next_ext_capability(pdev, off, \ + PCI_EXT_CAP_ID_DOE); \ + off > 0; \ + off = pci_find_next_ext_capability(pdev, off, \ + PCI_EXT_CAP_ID_DOE)) + +struct pci_doe_mb *pcim_doe_create_mb(struct pci_dev *pdev, u16 cap_offset); +bool pci_doe_supports_prot(struct pci_doe_mb *doe_mb, u16 vid, u8 type); +int pci_doe_submit_task(struct pci_doe_mb *doe_mb, struct pci_doe_task *task); + +#endif diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 108f8523fa04..57b8e2ffb1dd 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -737,7 +737,8 @@ #define PCI_EXT_CAP_ID_DVSEC 0x23 /* Designated Vendor-Specific */ #define PCI_EXT_CAP_ID_DLF 0x25 /* Data Link Feature */ #define PCI_EXT_CAP_ID_PL_16GT 0x26 /* Physical Layer 16.0 GT/s */ -#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PL_16GT +#define PCI_EXT_CAP_ID_DOE 0x2E /* Data Object Exchange */ +#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_DOE #define PCI_EXT_CAP_DSN_SIZEOF 12 #define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40 @@ -1103,4 +1104,30 @@ #define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_MASK 0x000000F0 #define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_SHIFT 4 +/* Data Object Exchange */ +#define PCI_DOE_CAP 0x04 /* DOE Capabilities Register */ +#define PCI_DOE_CAP_INT_SUP 0x00000001 /* Interrupt Support */ +#define PCI_DOE_CAP_INT_MSG_NUM 0x00000ffe /* Interrupt Message Number */ +#define PCI_DOE_CTRL 0x08 /* DOE Control Register */ +#define PCI_DOE_CTRL_ABORT 0x00000001 /* DOE Abort */ +#define PCI_DOE_CTRL_INT_EN 0x00000002 /* DOE Interrupt Enable */ +#define PCI_DOE_CTRL_GO 0x80000000 /* DOE Go */ +#define PCI_DOE_STATUS 0x0c /* DOE Status Register */ +#define PCI_DOE_STATUS_BUSY 0x00000001 /* DOE Busy */ +#define PCI_DOE_STATUS_INT_STATUS 0x00000002 /* DOE Interrupt Status */ +#define PCI_DOE_STATUS_ERROR 0x00000004 /* DOE Error */ +#define PCI_DOE_STATUS_DATA_OBJECT_READY 0x80000000 /* Data Object Ready */ +#define PCI_DOE_WRITE 0x10 /* DOE Write Data Mailbox Register */ +#define PCI_DOE_READ 0x14 /* DOE Read Data Mailbox Register */ + +/* DOE Data Object - note not actually registers */ +#define PCI_DOE_DATA_OBJECT_HEADER_1_VID 0x0000ffff +#define PCI_DOE_DATA_OBJECT_HEADER_1_TYPE 0x00ff0000 +#define PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH 0x0003ffff + +#define PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX 0x000000ff +#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID 0x0000ffff +#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL 0x00ff0000 +#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX 0xff000000 + #endif /* LINUX_PCI_REGS_H */ From patchwork Fri Jul 15 03:04:21 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ira Weiny X-Patchwork-Id: 1656725 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=intel.com header.i=@intel.com header.a=rsa-sha256 header.s=Intel header.b=koO7tekl; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LkbnY02pkz9s09 for ; Fri, 15 Jul 2022 13:05:05 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241283AbiGODFD (ORCPT ); Thu, 14 Jul 2022 23:05:03 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33752 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241276AbiGODEy (ORCPT ); Thu, 14 Jul 2022 23:04:54 -0400 Received: from mga04.intel.com (mga04.intel.com [192.55.52.120]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BDC1576959; Thu, 14 Jul 2022 20:04:49 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1657854289; x=1689390289; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=bjcFNxZSbyIUMe7CoijU9+ghKqsvF1aEjrtLIzNGwpc=; b=koO7tekltZNAmHHl4DZD8i8HQVlO4gPqR44wCsxEBUVUBQTBlcbsmIQR zgEuN95ffpzE6b/wocNrrqHUWl7iNeqjinRoV00E/ZULUNEZ9ZbGnA+Km 6LwqVaMyA6pl60hdoPwadvno4+8PNxhz7BpQEArySXbw4Sv8pUnbNd1/q 8b3A8dLLSqjRZkgqu+jEXgCAJJ3FyRNQilEtF+upyT12Yd1O9AYpyVv3t OP9lcimvR0Y87a8H1eknwJYauzJayE/UQH18guBabXwcWlwbpzKMBUrJC zwggwIZsjistfVYZqjchQ6wnBb+bWsShlglILeGMuVJa513KsvTj0p5s8 w==; X-IronPort-AV: E=McAfee;i="6400,9594,10408"; a="284445263" X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="284445263" Received: from fmsmga007.fm.intel.com ([10.253.24.52]) by fmsmga104.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:04:49 -0700 X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="600347925" Received: from mbordone-mobl.amr.corp.intel.com (HELO localhost) ([10.255.5.217]) by fmsmga007-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:04:46 -0700 From: ira.weiny@intel.com To: Dan Williams , Bjorn Helgaas , Jonathan Cameron Cc: Ira Weiny , Davidlohr Bueso , Lukas Wunner , Alison Schofield , Vishal Verma , Dave Jiang , Ben Widawsky , linux-kernel@vger.kernel.org, linux-cxl@vger.kernel.org, linux-pci@vger.kernel.org Subject: [PATCH V14 4/7] cxl/pci: Create PCI DOE mailbox's for memory devices Date: Thu, 14 Jul 2022 20:04:21 -0700 Message-Id: <20220715030424.462963-5-ira.weiny@intel.com> X-Mailer: git-send-email 2.35.3 In-Reply-To: <20220715030424.462963-1-ira.weiny@intel.com> References: <20220715030424.462963-1-ira.weiny@intel.com> MIME-Version: 1.0 X-Spam-Status: No, score=-5.0 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED, SPF_HELO_NONE,SPF_NONE,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Ira Weiny DOE mailbox objects will be needed for various mailbox communications with each memory device. Iterate each DOE mailbox capability and create PCI DOE mailbox objects as found. It is not anticipated that this is the final resting place for the iteration of the DOE devices. The support of switch ports will drive this code into the PCIe side. In this imagined architecture the CXL port driver would then query into the PCI device for the DOE mailbox array. For now creating the mailboxes in the CXL port is good enough for the endpoints. Later PCIe ports will need to support this to support switch ports more generically. Cc: Dan Williams Cc: Davidlohr Bueso Cc: Lukas Wunner Signed-off-by: Ira Weiny Reviewed-by: Jonathan Cameron --- Changes from V13: Dan: s/pci_err/dev_err s/pci_dbg/dev_dbg Move xa_init() into devm_cxl_pci_create_doe() Changes from V12: remove irq param from CXL Jonathan: remove xa local variable clarify MB creation as best effort But ensure pci_err() if they fail Check devm_add_action() return for failure Davidlohr and Jonathan: Return error ... Changes from V11: Drop review from: Ben Widawsky Remove irq code for now Adjust for pci_doe_get_int_msg_num() Adjust for pcim_doe_create_mb() (No longer need to handle the destroy.) Use xarray for DOE mailbox array Changes from V9: Bug fix: ensure DOE mailboxes are iterated before memdev add Ben Widawsky Set use_irq to false and just return on error. Don't return a value from devm_cxl_pci_create_doe() Skip allocating doe_mb array if there are no mailboxes Skip requesting irqs if none found. Ben/Jonathan Cameron s/num_irqs/max_irqs Changes from V8: Move PCI_DOE selection to CXL_BUS to support future patches which move queries into the port code. Remove Auxiliary device arch Squash the functionality of the auxiliary driver into this patch. Split out the irq handling a bit. Changes from V7: Minor code clean ups Rebased on cxl-pending Changes from V6: Move all the auxiliary device stuff to the CXL layer Changes from V5: Split the CXL specific stuff off from the PCI DOE create auxiliary device code. --- drivers/cxl/Kconfig | 1 + drivers/cxl/cxlmem.h | 3 +++ drivers/cxl/pci.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 48 insertions(+) diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig index f64e3984689f..7adaaf80b302 100644 --- a/drivers/cxl/Kconfig +++ b/drivers/cxl/Kconfig @@ -2,6 +2,7 @@ menuconfig CXL_BUS tristate "CXL (Compute Express Link) Devices Support" depends on PCI + select PCI_DOE help CXL is a bus that is electrically compatible with PCI Express, but layers three protocols on that signalling (CXL.io, CXL.cache, and diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h index c6d6f57856cc..bfa2eaf649a9 100644 --- a/drivers/cxl/cxlmem.h +++ b/drivers/cxl/cxlmem.h @@ -192,6 +192,7 @@ struct cxl_endpoint_dvsec_info { * @component_reg_phys: register base of component registers * @info: Cached DVSEC information about the device. * @serial: PCIe Device Serial Number + * @doe_mbs: PCI DOE mailbox array * @mbox_send: @dev specific transport for transmitting mailbox commands * * See section 8.2.9.5.2 Capacity Configuration and Label Storage for @@ -226,6 +227,8 @@ struct cxl_dev_state { resource_size_t component_reg_phys; u64 serial; + struct xarray doe_mbs; + int (*mbox_send)(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd); }; diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c index eeff9599acda..faeb5d9d7a7a 100644 --- a/drivers/cxl/pci.c +++ b/drivers/cxl/pci.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include "cxlmem.h" #include "cxlpci.h" @@ -386,6 +387,47 @@ static int cxl_setup_regs(struct pci_dev *pdev, enum cxl_regloc_type type, return rc; } +static void cxl_pci_destroy_doe(void *mbs) +{ + xa_destroy(mbs); +} + +static void devm_cxl_pci_create_doe(struct cxl_dev_state *cxlds) +{ + struct device *dev = cxlds->dev; + struct pci_dev *pdev = to_pci_dev(dev); + u16 off = 0; + + xa_init(&cxlds->doe_mbs); + if (devm_add_action(&pdev->dev, cxl_pci_destroy_doe, &cxlds->doe_mbs)) { + dev_err(dev, "Failed to create XArray for DOE's\n"); + return; + } + + /* + * Mailbox creation is best effort. Higher layers must determine if + * the lack of a mailbox for their protocol is a device failure or not. + */ + pci_doe_for_each_off(pdev, off) { + struct pci_doe_mb *doe_mb; + + doe_mb = pcim_doe_create_mb(pdev, off); + if (IS_ERR(doe_mb)) { + dev_err(dev, "Failed to create MB object for MB @ %x\n", + off); + continue; + } + + if (xa_insert(&cxlds->doe_mbs, off, doe_mb, GFP_KERNEL)) { + dev_err(dev, "xa_insert failed to insert MB @ %x\n", + off); + continue; + } + + dev_dbg(dev, "Created DOE mailbox @%x\n", off); + } +} + static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct cxl_register_map map; @@ -434,6 +476,8 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) cxlds->component_reg_phys = cxl_regmap_to_base(pdev, &map); + devm_cxl_pci_create_doe(cxlds); + rc = cxl_pci_setup_mailbox(cxlds); if (rc) return rc; From patchwork Fri Jul 15 03:04:22 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Ira Weiny X-Patchwork-Id: 1656727 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=intel.com header.i=@intel.com header.a=rsa-sha256 header.s=Intel header.b=mtUTpuyW; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Lkbp26zQLz9s09 for ; Fri, 15 Jul 2022 13:05:30 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241353AbiGODF3 (ORCPT ); Thu, 14 Jul 2022 23:05:29 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34046 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241315AbiGODE6 (ORCPT ); Thu, 14 Jul 2022 23:04:58 -0400 Received: from mga05.intel.com (mga05.intel.com [192.55.52.43]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 995557696C; Thu, 14 Jul 2022 20:04:56 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1657854296; x=1689390296; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=U3saHsgvYciwhLfxacVmiu3qWDreQ9A9gfZULUZztoM=; b=mtUTpuyWbAaOl88KAeVBPPJJOEAuy5YZFdU/+8WEEG1M/HsOxtCrdsuW IFFSqZTK5MRxNhBcTfOfOpQPh7Ii7LgTiS4nKv74a6f0gG52v7dykWKOD 17NpB+0fd8f7t/69V82c+DPRfjKYTIYFZMOhmMK/iS249+lJK/9mNZ4dB cpf/98ZSXNqe8FayuKMjQK8SQy1gwgTrhYFQNShPH3PXYK8Z1yOO8/9IB nmHtyPwAIIbAPf2D+ewruE7JVpsdSigG6hsY3AH0bkG4xP6egv0KvViEO 0fIVBQMLF93ElDcwFZfvTPky5a/SBt3wagGYkbx2fFVPbhT9EKNbyBsNJ g==; X-IronPort-AV: E=McAfee;i="6400,9594,10408"; a="372003645" X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="372003645" Received: from orsmga008.jf.intel.com ([10.7.209.65]) by fmsmga105.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:04:54 -0700 X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="623678661" Received: from mbordone-mobl.amr.corp.intel.com (HELO localhost) ([10.255.5.217]) by orsmga008-auth.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:04:51 -0700 From: ira.weiny@intel.com To: Dan Williams , Bjorn Helgaas , Jonathan Cameron Cc: Ira Weiny , =?utf-8?q?Krzysztof_Wilczy=C5=84ski?= , Greg Kroah-Hartman , Lukas Wunner , Alison Schofield , Vishal Verma , Dave Jiang , Ben Widawsky , linux-kernel@vger.kernel.org, linux-cxl@vger.kernel.org, linux-pci@vger.kernel.org Subject: [PATCH V14 5/7] driver-core: Introduce BIN_ATTR_ADMIN_{RO,RW} Date: Thu, 14 Jul 2022 20:04:22 -0700 Message-Id: <20220715030424.462963-6-ira.weiny@intel.com> X-Mailer: git-send-email 2.35.3 In-Reply-To: <20220715030424.462963-1-ira.weiny@intel.com> References: <20220715030424.462963-1-ira.weiny@intel.com> MIME-Version: 1.0 X-Spam-Status: No, score=-5.0 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED, SPF_HELO_NONE,SPF_NONE,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Ira Weiny Many binary attributes need to limit access to CAP_SYS_ADMIN only; ie many binary attributes specify is_visible with 0400 or 0600. Make setting the permissions of such attributes more explicit by defining BIN_ATTR_ADMIN_{RO,RW}. Cc: Bjorn Helgaas Suggested-by: Dan Williams Suggested-by: Krzysztof Wilczyński Reviewed-by: Greg Kroah-Hartman Signed-off-by: Ira Weiny Reviewed-by: Jonathan Cameron --- Changes from V12: Pick up review tag Bjorn: NOTE: this has a lot of similarities to https://lore.kernel.org/all/20210416205856.3234481-7-kw@linux.com/ I'm not sure why that patch was not picked up. But I've added Krzysztof as a suggested by if that is ok? Changes from V11: New Patch --- include/linux/sysfs.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index e3f1e8ac1f85..fd3fe5c8c17f 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -235,6 +235,22 @@ struct bin_attribute bin_attr_##_name = __BIN_ATTR_WO(_name, _size) #define BIN_ATTR_RW(_name, _size) \ struct bin_attribute bin_attr_##_name = __BIN_ATTR_RW(_name, _size) + +#define __BIN_ATTR_ADMIN_RO(_name, _size) { \ + .attr = { .name = __stringify(_name), .mode = 0400 }, \ + .read = _name##_read, \ + .size = _size, \ +} + +#define __BIN_ATTR_ADMIN_RW(_name, _size) \ + __BIN_ATTR(_name, 0600, _name##_read, _name##_write, _size) + +#define BIN_ATTR_ADMIN_RO(_name, _size) \ +struct bin_attribute bin_attr_##_name = __BIN_ATTR_ADMIN_RO(_name, _size) + +#define BIN_ATTR_ADMIN_RW(_name, _size) \ +struct bin_attribute bin_attr_##_name = __BIN_ATTR_ADMIN_RW(_name, _size) + struct sysfs_ops { ssize_t (*show)(struct kobject *, struct attribute *, char *); ssize_t (*store)(struct kobject *, struct attribute *, const char *, size_t); From patchwork Fri Jul 15 03:04:23 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ira Weiny X-Patchwork-Id: 1656728 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=intel.com header.i=@intel.com header.a=rsa-sha256 header.s=Intel header.b=PYvP6qcF; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Lkbp53GXbz9s09 for ; Fri, 15 Jul 2022 13:05:33 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241366AbiGODFb (ORCPT ); Thu, 14 Jul 2022 23:05:31 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33670 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241297AbiGODFD (ORCPT ); Thu, 14 Jul 2022 23:05:03 -0400 Received: from mga06.intel.com (mga06b.intel.com [134.134.136.31]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 91EA976976; Thu, 14 Jul 2022 20:05:00 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1657854301; x=1689390301; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=FVsHh87Yo5YlwZX3rffXt8wJY1K3tjVDtjMedpsAFoc=; b=PYvP6qcFmb6nSeH3dTxpVZD5pVxelsBzRTgs+XUhrRS3TzioLlWOLCfH 3hmKMRuvp9btzzsn4d0JCSu4CZ3LkcfYPhAGGUIArvhZ21r1ogtrNGaPx cVV3qcHXjl31R/xYxeCaPCUWtuJxVekWxW4nRFx1xJ+972IMMTsLENNa1 PS8233s2RdVCFT4m9CwxxsZajf/7oI5DJX8gH0qStzer++8aaHNEaILmi 35bQrAuTzMN/gAOSAzU18tpEWB5YIi5QOywj2/wMOanYUGV3IvT1OQZce hhPLd2g/VCe8CHY81u/8VomldXGvJ890PiyP8QI1LmvhaAJejE/0AmDmS A==; X-IronPort-AV: E=McAfee;i="6400,9594,10408"; a="347366297" X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="347366297" Received: from orsmga001.jf.intel.com ([10.7.209.18]) by orsmga104.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:05:00 -0700 X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="628939292" Received: from mbordone-mobl.amr.corp.intel.com (HELO localhost) ([10.255.5.217]) by orsmga001-auth.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:04:56 -0700 From: ira.weiny@intel.com To: Dan Williams , Bjorn Helgaas , Jonathan Cameron Cc: Ira Weiny , Lukas Wunner , Alison Schofield , Vishal Verma , Dave Jiang , Ben Widawsky , linux-kernel@vger.kernel.org, linux-cxl@vger.kernel.org, linux-pci@vger.kernel.org Subject: [PATCH V14 6/7] cxl/port: Read CDAT table Date: Thu, 14 Jul 2022 20:04:23 -0700 Message-Id: <20220715030424.462963-7-ira.weiny@intel.com> X-Mailer: git-send-email 2.35.3 In-Reply-To: <20220715030424.462963-1-ira.weiny@intel.com> References: <20220715030424.462963-1-ira.weiny@intel.com> MIME-Version: 1.0 X-Spam-Status: No, score=-5.0 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED, SPF_HELO_NONE,SPF_NONE,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Ira Weiny The OS will need CDAT data from CXL devices to properly set up interleave sets. Currently this is supported through a DOE mailbox which supports CDAT. Search the DOE mailboxes available, query CDAT data, and cache the data for later parsing. Provide a sysfs binary attribute to allow dumping of the CDAT. Binary dumping is modeled on /sys/firmware/ACPI/tables/ The ability to dump this table will be very useful for emulation of real devices once they become available as QEMU CXL type 3 device emulation will be able to load this file in. This does not support table updates at runtime. It will always provide whatever was there when first cached. Handling of table updates can be implemented later. Finally create a complete list of CDAT defines within cdat.h for code wishing to decode the CDAT table. Signed-off-by: Jonathan Cameron Co-developed-by: Jonathan Cameron Signed-off-by: Ira Weiny --- Changes from V13: Dan: Add entry in Documentation/ABI/testing/sysfs-bus-cxl Remove table parsing defines. s/cdat_sup/cdat_available s/cdat_mb/cdat_doe/ Don't check endpoint in find_cdat_doe() Create CDAT_DOE_TASK macro Changes from V12: Fix checking for task.rv for errors Ensure no over run of non-DW aligned buffer length's Changes from V11: Adjust for the use of DOE mailbox xarray Dan Williams: Remove unnecessary get/put device Use new BIN_ATTR_ADMIN_RO macro Flag that CDAT was supported If there is a read error then the CDAT sysfs will return a 0 length entry Changes from V10: Ben Widawsky Failure to find CDAT should be a debug message not error Remove reference to cdat_mb from the port object Dropped [PATCH V10 5/9] cxl/port: Find a DOE mailbox which supports CDAT Iterate the mailboxes for the CDAT one each time. Define CXL_DOE_TABLE_ACCESS_LAST_ENTRY and add comment about it's use. Changes from V9: Add debugging output Jonathan Cameron Move read_cdat to port probe by using dev_groups for the sysfs attributes. This avoids issues with using devm before the driver is loaded while making sure the CDAT binary is available. Changes from V8: Fix length print format Incorporate feedback from Jonathan Move all this to cxl_port which can help support switches when the time comes. Changes from V6: Fix issue with devm use Move cached cdat data to cxl_dev_state Use new pci_doe_submit_task() Ensure the aux driver is locked while processing tasks Rebased on cxl-pending Changes from V5: Add proper guards around cdat.h Split out finding the CDAT DOE mailbox Use cxl_cdat to group CDAT data together Adjust to use auxiliary_find_device() to find the DOE device which supplies the CDAT protocol. Rebased to latest Remove dev_dbg(length) Remove unneeded DOE Table access defines Move CXL_DOE_PROTOCOL_TABLE_ACCESS define into this patch where it is used Changes from V4: Split this into it's own patch Rearchitect this such that the memdev driver calls into the DOE driver via the cxl_mem state object. This allows CDAT data to come from any type of cxl_mem object not just PCI DOE. Rebase on new struct cxl_dev_state --- Documentation/ABI/testing/sysfs-bus-cxl | 10 ++ drivers/cxl/cdat.h | 61 +++++++++ drivers/cxl/core/pci.c | 169 ++++++++++++++++++++++++ drivers/cxl/cxl.h | 5 + drivers/cxl/cxlpci.h | 1 + drivers/cxl/port.c | 54 ++++++++ 6 files changed, 300 insertions(+) create mode 100644 drivers/cxl/cdat.h diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index 1fd5984b6158..6fb6459466f8 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -164,3 +164,13 @@ Description: expander memory (type-3). The 'target_type' attribute indicates the current setting which may dynamically change based on what memory regions are activated in this decode hierarchy. + +What: /sys/bus/cxl/devices/endpointX/CDAT/cdat +Date: July, 2022 +KernelVersion: v5.19 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) If this sysfs entry is not present no DOE mailbox was + found to support CDAT data. If it is present and the length of + the data is 0 reading the CDAT data failed. Otherwise the CDAT + data is reported. diff --git a/drivers/cxl/cdat.h b/drivers/cxl/cdat.h new file mode 100644 index 000000000000..67010717ffca --- /dev/null +++ b/drivers/cxl/cdat.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __CXL_CDAT_H__ +#define __CXL_CDAT_H__ + +/* + * Coherent Device Attribute table (CDAT) + * + * Specification available from UEFI.org + * + * Whilst CDAT is defined as a single table, the access via DOE maiboxes is + * done one entry at a time, where the first entry is the header. + */ + +#define CXL_DOE_TABLE_ACCESS_REQ_CODE 0x000000ff +#define CXL_DOE_TABLE_ACCESS_REQ_CODE_READ 0 +#define CXL_DOE_TABLE_ACCESS_TABLE_TYPE 0x0000ff00 +#define CXL_DOE_TABLE_ACCESS_TABLE_TYPE_CDATA 0 +#define CXL_DOE_TABLE_ACCESS_ENTRY_HANDLE 0xffff0000 +#define CXL_DOE_TABLE_ACCESS_LAST_ENTRY 0xffff + +/* + * CDAT entries are little endian and are read from PCI config space which + * is also little endian. + * As such, on a big endian system these will have been reversed. + * This prevents us from making easy use of packed structures. + * Style form pci_regs.h + */ + +#define CDAT_HEADER_LENGTH_DW 4 +#define CDAT_HEADER_LENGTH_BYTES (CDAT_HEADER_LENGTH_DW * sizeof(u32)) +#define CDAT_HEADER_DW0_LENGTH 0xffffffff +#define CDAT_HEADER_DW1_REVISION 0x000000ff +#define CDAT_HEADER_DW1_CHECKSUM 0x0000ff00 +/* CDAT_HEADER_DW2_RESERVED */ +#define CDAT_HEADER_DW3_SEQUENCE 0xffffffff + +/* All structures have a common first DW */ +#define CDAT_STRUCTURE_DW0_TYPE 0x000000ff +#define CDAT_STRUCTURE_DW0_TYPE_DSMAS 0 +#define CDAT_STRUCTURE_DW0_TYPE_DSLBIS 1 +#define CDAT_STRUCTURE_DW0_TYPE_DSMSCIS 2 +#define CDAT_STRUCTURE_DW0_TYPE_DSIS 3 +#define CDAT_STRUCTURE_DW0_TYPE_DSEMTS 4 +#define CDAT_STRUCTURE_DW0_TYPE_SSLBIS 5 + +#define CDAT_STRUCTURE_DW0_LENGTH 0xffff0000 + +#define CXL_DOE_PROTOCOL_TABLE_ACCESS 2 + +/** + * struct cxl_cdat - CXL CDAT data + * + * @table: cache of CDAT table + * @length: length of cached CDAT table + */ +struct cxl_cdat { + void *table; + size_t length; +}; + +#endif /* !__CXL_CDAT_H__ */ diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c index 7672789c3225..dd5d1da412ca 100644 --- a/drivers/cxl/core/pci.c +++ b/drivers/cxl/core/pci.c @@ -4,10 +4,12 @@ #include #include #include +#include #include #include #include #include "core.h" +#include "cdat.h" /** * DOC: cxl core pci @@ -452,3 +454,170 @@ int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm) return 0; } EXPORT_SYMBOL_NS_GPL(cxl_hdm_decode_init, CXL); + +static struct pci_doe_mb *find_cdat_doe(struct device *uport) +{ + struct cxl_memdev *cxlmd; + struct cxl_dev_state *cxlds; + unsigned long index; + void *entry; + + cxlmd = to_cxl_memdev(uport); + cxlds = cxlmd->cxlds; + + xa_for_each(&cxlds->doe_mbs, index, entry) { + struct pci_doe_mb *cur = entry; + + if (pci_doe_supports_prot(cur, PCI_DVSEC_VENDOR_ID_CXL, + CXL_DOE_PROTOCOL_TABLE_ACCESS)) + return cur; + } + + return NULL; +} + +#define CDAT_DOE_REQ(entry_handle) \ + (FIELD_PREP(CXL_DOE_TABLE_ACCESS_REQ_CODE, \ + CXL_DOE_TABLE_ACCESS_REQ_CODE_READ) | \ + FIELD_PREP(CXL_DOE_TABLE_ACCESS_TABLE_TYPE, \ + CXL_DOE_TABLE_ACCESS_TABLE_TYPE_CDATA) | \ + FIELD_PREP(CXL_DOE_TABLE_ACCESS_ENTRY_HANDLE, (entry_handle))) + +static void cxl_doe_task_complete(struct pci_doe_task *task) +{ + complete(task->private); +} + +#define CDAT_DOE_TASK(req, req_sz, rsp, rsp_sz, comp) \ +{ \ + .prot.vid = PCI_DVSEC_VENDOR_ID_CXL, \ + .prot.type = CXL_DOE_PROTOCOL_TABLE_ACCESS, \ + .request_pl = req, \ + .request_pl_sz = req_sz, \ + .response_pl = rsp, \ + .response_pl_sz = rsp_sz, \ + .complete = cxl_doe_task_complete, \ + .private = comp, \ +} + +static int cxl_cdat_get_length(struct device *dev, + struct pci_doe_mb *cdat_doe, + size_t *length) +{ + u32 cdat_request_pl = CDAT_DOE_REQ(0); + u32 cdat_response_pl[32]; + DECLARE_COMPLETION_ONSTACK(c); + struct pci_doe_task task = CDAT_DOE_TASK(&cdat_request_pl, + sizeof(cdat_request_pl), + cdat_response_pl, + sizeof(cdat_response_pl), + &c); + int rc; + + rc = pci_doe_submit_task(cdat_doe, &task); + if (rc < 0) { + dev_err(dev, "DOE submit failed: %d", rc); + return rc; + } + wait_for_completion(&c); + if (task.rv < sizeof(u32)) + return -EIO; + + *length = cdat_response_pl[1]; + dev_dbg(dev, "CDAT length %zu\n", *length); + + return 0; +} + +static int cxl_cdat_read_table(struct device *dev, + struct pci_doe_mb *cdat_doe, + struct cxl_cdat *cdat) +{ + size_t length = cdat->length; + u32 *data = cdat->table; + int entry_handle = 0; + + do { + u32 cdat_request_pl = CDAT_DOE_REQ(entry_handle); + u32 cdat_response_pl[32]; + DECLARE_COMPLETION_ONSTACK(c); + struct pci_doe_task task = CDAT_DOE_TASK(&cdat_request_pl, + sizeof(cdat_request_pl), + cdat_response_pl, + sizeof(cdat_response_pl), + &c); + size_t entry_dw; + u32 *entry; + int rc; + + rc = pci_doe_submit_task(cdat_doe, &task); + if (rc < 0) { + dev_err(dev, "DOE submit failed: %d", rc); + return rc; + } + wait_for_completion(&c); + /* 1 DW header + 1 DW data min */ + if (task.rv < (2 * sizeof(u32))) + return -EIO; + + /* Get the CXL table access header entry handle */ + entry_handle = FIELD_GET(CXL_DOE_TABLE_ACCESS_ENTRY_HANDLE, + cdat_response_pl[0]); + entry = cdat_response_pl + 1; + entry_dw = task.rv / sizeof(u32); + /* Skip Header */ + entry_dw -= 1; + entry_dw = min(length / sizeof(u32), entry_dw); + /* Prevent length < 1 DW from causing a buffer overflow */ + if (entry_dw) { + memcpy(data, entry, entry_dw * sizeof(u32)); + length -= entry_dw * sizeof(u32); + data += entry_dw; + } + } while (entry_handle != CXL_DOE_TABLE_ACCESS_LAST_ENTRY); + + return 0; +} + +/** + * read_cdat_data - Read the CDAT data on this port + * @port: Port to read data from + * + * This call will sleep waiting for responses from the DOE mailbox. + */ +void read_cdat_data(struct cxl_port *port) +{ + static struct pci_doe_mb *cdat_doe; + struct device *dev = &port->dev; + struct device *uport = port->uport; + size_t cdat_length; + int rc; + + cdat_doe = find_cdat_doe(uport); + if (!cdat_doe) { + dev_dbg(dev, "No CDAT mailbox\n"); + return; + } + + port->cdat_available = true; + + if (cxl_cdat_get_length(dev, cdat_doe, &cdat_length)) { + dev_dbg(dev, "No CDAT length\n"); + return; + } + + port->cdat.table = devm_kzalloc(dev, cdat_length, GFP_KERNEL); + if (!port->cdat.table) + return; + + port->cdat.length = cdat_length; + rc = cxl_cdat_read_table(dev, cdat_doe, &port->cdat); + if (rc) { + /* Don't leave table data allocated on error */ + devm_kfree(dev, port->cdat.table); + port->cdat.table = NULL; + port->cdat.length = 0; + dev_err(dev, "CDAT data read error\n"); + } +} +EXPORT_SYMBOL_NS_GPL(read_cdat_data, CXL); diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h index 570bd9f8141b..64ea8c80b917 100644 --- a/drivers/cxl/cxl.h +++ b/drivers/cxl/cxl.h @@ -8,6 +8,7 @@ #include #include #include +#include "cdat.h" /** * DOC: cxl objects @@ -289,6 +290,8 @@ struct cxl_nvdimm { * @component_reg_phys: component register capability base address (optional) * @dead: last ep has been removed, force port re-creation * @depth: How deep this port is relative to the root. depth 0 is the root. + * @cdat: Cached CDAT data + * @cdat_available: Should a CDAT attribute be available in sysfs */ struct cxl_port { struct device dev; @@ -301,6 +304,8 @@ struct cxl_port { resource_size_t component_reg_phys; bool dead; unsigned int depth; + struct cxl_cdat cdat; + bool cdat_available; }; /** diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h index fce1c11729c2..eec597dbe763 100644 --- a/drivers/cxl/cxlpci.h +++ b/drivers/cxl/cxlpci.h @@ -74,4 +74,5 @@ static inline resource_size_t cxl_regmap_to_base(struct pci_dev *pdev, int devm_cxl_port_enumerate_dports(struct cxl_port *port); struct cxl_dev_state; int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm); +void read_cdat_data(struct cxl_port *port); #endif /* __CXL_PCI_H__ */ diff --git a/drivers/cxl/port.c b/drivers/cxl/port.c index 3cf308f114c4..08b8ac76f87b 100644 --- a/drivers/cxl/port.c +++ b/drivers/cxl/port.c @@ -53,6 +53,9 @@ static int cxl_port_probe(struct device *dev) struct cxl_memdev *cxlmd = to_cxl_memdev(port->uport); struct cxl_dev_state *cxlds = cxlmd->cxlds; + /* Cache the data early to ensure is_visible() works */ + read_cdat_data(port); + get_device(&cxlmd->dev); rc = devm_add_action_or_reset(dev, schedule_detach, cxlmd); if (rc) @@ -78,10 +81,61 @@ static int cxl_port_probe(struct device *dev) return 0; } +static ssize_t cdat_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t offset, size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct cxl_port *port = to_cxl_port(dev); + + if (!port->cdat_available) + return -ENXIO; + + if (!port->cdat.table) + return 0; + + return memory_read_from_buffer(buf, count, &offset, + port->cdat.table, + port->cdat.length); +} + +static BIN_ATTR_ADMIN_RO(cdat, 0); + +static umode_t cxl_port_bin_attr_is_visible(struct kobject *kobj, + struct bin_attribute *attr, int i) +{ + struct device *dev = kobj_to_dev(kobj); + struct cxl_port *port = to_cxl_port(dev); + + if ((attr == &bin_attr_cdat) && port->cdat_available) + return attr->attr.mode; + + return 0; +} + +static struct bin_attribute *cxl_cdat_bin_attributes[] = { + &bin_attr_cdat, + NULL, +}; + +static struct attribute_group cxl_cdat_attribute_group = { + .name = "CDAT", + .bin_attrs = cxl_cdat_bin_attributes, + .is_bin_visible = cxl_port_bin_attr_is_visible, +}; + +static const struct attribute_group *cxl_port_attribute_groups[] = { + &cxl_cdat_attribute_group, + NULL, +}; + static struct cxl_driver cxl_port_driver = { .name = "cxl_port", .probe = cxl_port_probe, .id = CXL_DEVICE_PORT, + .drv = { + .dev_groups = cxl_port_attribute_groups, + }, }; module_cxl_driver(cxl_port_driver); From patchwork Fri Jul 15 03:04:24 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ira Weiny X-Patchwork-Id: 1656729 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=intel.com header.i=@intel.com header.a=rsa-sha256 header.s=Intel header.b=GVxNRMss; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4LkbpB0GmNz9s09 for ; Fri, 15 Jul 2022 13:05:38 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241303AbiGODFf (ORCPT ); Thu, 14 Jul 2022 23:05:35 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33952 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241263AbiGODFE (ORCPT ); Thu, 14 Jul 2022 23:05:04 -0400 Received: from mga17.intel.com (mga17.intel.com [192.55.52.151]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5854E67160; Thu, 14 Jul 2022 20:05:03 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1657854303; x=1689390303; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=du+1VWLCHVjOapuMlx5AwDnUCvU9qYGbjlO6VboghMU=; b=GVxNRMssQVGcTsfN00rsXkI10cfO8+dV05LbnWQ+SGPLpkLL9nbRDjf5 Xe43jJ3LQ84EbZidBLWRamLX99rrXOyWGzTUUyZKs4/rDSPiWEwV/Iibg ilSnZPILdtVXk/L7Tft4tvn52WCnweT2Nugmf+KLwTYW0yE3lGhJik7Sa RCSP5pO6cxMlSyap6PhFa+KC6xVLGPnFRtCgEOn3tgdyjiGr+SUsAu8Ml Y2mEkenUBR/RM/E3rPHUWdExViKmJqTdKYPxiprP9lu/FFFyjg9PP+1/y wMOayu3c2GmbEx3rmDJkLRls0UDV/seUe48KJCjgQp05ZlassfdLR+ktw Q==; X-IronPort-AV: E=McAfee;i="6400,9594,10408"; a="266100505" X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="266100505" Received: from fmsmga004.fm.intel.com ([10.253.24.48]) by fmsmga107.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:05:03 -0700 X-IronPort-AV: E=Sophos;i="5.92,272,1650956400"; d="scan'208";a="664028207" Received: from mbordone-mobl.amr.corp.intel.com (HELO localhost) ([10.255.5.217]) by fmsmga004-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Jul 2022 20:05:00 -0700 From: ira.weiny@intel.com To: Dan Williams , Bjorn Helgaas , Jonathan Cameron Cc: Ira Weiny , Lukas Wunner , Alison Schofield , Vishal Verma , Dave Jiang , Ben Widawsky , linux-kernel@vger.kernel.org, linux-cxl@vger.kernel.org, linux-pci@vger.kernel.org Subject: [PATCH V14 7/7] cxl/port: Introduce cxl_cdat_valid() Date: Thu, 14 Jul 2022 20:04:24 -0700 Message-Id: <20220715030424.462963-8-ira.weiny@intel.com> X-Mailer: git-send-email 2.35.3 In-Reply-To: <20220715030424.462963-1-ira.weiny@intel.com> References: <20220715030424.462963-1-ira.weiny@intel.com> MIME-Version: 1.0 X-Spam-Status: No, score=-5.0 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED, SPF_HELO_NONE,SPF_NONE,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Ira Weiny The CDAT data is protected by a checksum and should be the proper length. Introduce cxl_cdat_valid() to validate the data. While at it check and store the sequence number. Signed-off-by: Ira Weiny --- Changes from V12 Jonathan: Remove unneeded rc check. Changes from V8 Move code to cxl/core/pci.c Changes from V6 Change name to cxl_cdat_valid() as this validates all the CDAT data not just the header Add error and debug prints Changes from V5 New patch, split out Update cdat_hdr_valid() Remove revision and cs field parsing There is no point in these Add seq check and debug print. --- drivers/cxl/cdat.h | 2 ++ drivers/cxl/core/pci.c | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+) diff --git a/drivers/cxl/cdat.h b/drivers/cxl/cdat.h index 67010717ffca..162ef474ee5a 100644 --- a/drivers/cxl/cdat.h +++ b/drivers/cxl/cdat.h @@ -52,10 +52,12 @@ * * @table: cache of CDAT table * @length: length of cached CDAT table + * @seq: Last read Sequence number of the CDAT table */ struct cxl_cdat { void *table; size_t length; + u32 seq; }; #endif /* !__CXL_CDAT_H__ */ diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c index dd5d1da412ca..36e14549997d 100644 --- a/drivers/cxl/core/pci.c +++ b/drivers/cxl/core/pci.c @@ -529,6 +529,40 @@ static int cxl_cdat_get_length(struct device *dev, return 0; } +static bool cxl_cdat_valid(struct device *dev, struct cxl_cdat *cdat) +{ + u32 *table = cdat->table; + u8 *data8 = cdat->table; + u32 length, seq; + u8 check; + int i; + + length = FIELD_GET(CDAT_HEADER_DW0_LENGTH, table[0]); + if ((length < CDAT_HEADER_LENGTH_BYTES) || (length > cdat->length)) { + dev_err(dev, "CDAT Invalid length %u (%zu-%zu)\n", length, + CDAT_HEADER_LENGTH_BYTES, cdat->length); + return false; + } + + for (check = 0, i = 0; i < length; i++) + check += data8[i]; + + dev_dbg(dev, "CDAT length %u CS %u\n", length, check); + if (check != 0) { + dev_err(dev, "CDAT Invalid checksum %u\n", check); + return false; + } + + seq = FIELD_GET(CDAT_HEADER_DW3_SEQUENCE, table[3]); + /* Store the sequence for now. */ + if (cdat->seq != seq) { + dev_info(dev, "CDAT seq change %x -> %x\n", cdat->seq, seq); + cdat->seq = seq; + } + + return true; +} + static int cxl_cdat_read_table(struct device *dev, struct pci_doe_mb *cdat_doe, struct cxl_cdat *cdat) @@ -576,6 +610,9 @@ static int cxl_cdat_read_table(struct device *dev, } } while (entry_handle != CXL_DOE_TABLE_ACCESS_LAST_ENTRY); + if (!cxl_cdat_valid(dev, cdat)) + return -EIO; + return 0; }