From patchwork Wed Nov 24 15:54:10 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: reinhold.mueller@emtrion.com X-Patchwork-Id: 1559157 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4HzmDP4KMHz9s1l for ; Thu, 25 Nov 2021 03:09:41 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234333AbhKXQMt (ORCPT ); Wed, 24 Nov 2021 11:12:49 -0500 Received: from mail.emtrion.de ([87.139.198.129]:49000 "EHLO mail3.emtrion.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S234210AbhKXQMs (ORCPT ); Wed, 24 Nov 2021 11:12:48 -0500 X-Greylist: delayed 903 seconds by postgrey-1.27 at vger.kernel.org; Wed, 24 Nov 2021 11:12:47 EST Received: from emtrion-yocto-comrzn1d.emtrion.local (2003:f9:5824:1:20c:29ff:fe08:43c4) by EMT-KA-S004.emtrion.local (2003:f9:5824:1:c59f:32f4:72e5:b9e1) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.922.19; Wed, 24 Nov 2021 16:54:32 +0100 From: To: , CC: , , Subject: [PATCH] arm: dts: stm32mp157c: Add support for the emtrion emSBC-Argon Date: Wed, 24 Nov 2021 16:54:10 +0100 Message-ID: <20211124155410.37249-1-reinhold.mueller@emtrion.com> X-Mailer: git-send-email 2.20.1 MIME-Version: 1.0 X-Originating-IP: [2003:f9:5824:1:20c:29ff:fe08:43c4] X-ClientProxiedBy: EMT-KA-S004.emtrion.local (2003:f9:5824:1:c59f:32f4:72e5:b9e1) To EMT-KA-S004.emtrion.local (2003:f9:5824:1:c59f:32f4:72e5:b9e1) X-C2ProcessedOrg: 5b249fcb-306f-4927-9982-5d11b1d300ce Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Reinhold Mueller This patch adds support for the emtrion GmbH Argon board series. They are available with STM32MP157 from STMicroelectronics with 512 MByte Memory. The devicetree stm32mp157c-emstamp-argon.dtsi is the common part providing the module components and the basic support for the SoC. The support for the emSBC-Argon baseboard in the developer-kit configuration is provided by the stm32mp157c-emsbc-argon.dts file. Signed-off-by: Reinhold Mueller --- .../devicetree/bindings/arm/stm32/stm32.yaml | 8 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts | 53 ++ .../boot/dts/stm32mp157c-emstamp-argon.dtsi | 665 ++++++++++++++++++ 4 files changed, 727 insertions(+) create mode 100644 arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts create mode 100644 arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index bcaf7be3ab37..710230847dcd 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -28,6 +28,14 @@ properties: - enum: - st,stm32mp153 - st,stm32mp157 + + - description: emtrion STM32MP1 Argon based Boards + items: + - enum: + - emtrion,stm32mp157c-emsbc-argon + - enum: + - emtrion,stm32mp157c-emstamp-argon + - const: st,stm32mp157 - items: - enum: - st,stm32f429i-disco diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8a2dfdf01ce3..a76226293f18 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1146,6 +1146,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157c-dhcom-picoitx.dtb \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ + stm32mp157c-emsbc-argon.dtb \ stm32mp157c-ev1.dtb \ stm32mp157c-lxa-mc1.dtb \ stm32mp157c-odyssey.dtb diff --git a/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts b/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts new file mode 100644 index 000000000000..3ec873b1ba2d --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (c) 2021 emtrion GmbH +// Author: Reinhold Müller . +// + +/dts-v1/; + +#include "stm32mp157c-emstamp-argon.dtsi" + +/ { + model = "emtrion STM32MP157C emSBC-Argon Developer Board"; + compatible = "emtrion,stm32mp157c-emsbc-argon", "emtrion,stm32mp157c-emstamp-argon", + "st,stm32mp157"; + + led: gpio_leds { + compatible = "gpio-leds"; + led2 { + label = "red"; + gpios = <&gpiof 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + default-state = "off"; + }; + led3 { + label = "green"; + gpios = <&gpioe 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + default-state = "off"; + }; + }; +}; + +&dac { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi new file mode 100644 index 000000000000..bcd6a2a687cf --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -0,0 +1,665 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (c) 2021 emtrion GmbH +// Author: Reinhold Müller . +// + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include +#include + +/ { + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + serial1 = &usart2; + serial2 = &usart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x2000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x2000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10044000 { + compatible = "shared-dma-pool"; + reg = <0x10044000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + gpu_reserved: gpu@dc000000 { + reg = <0xdc000000 0x4000000>; + no-map; + }; + }; + + led: gpio_leds { + compatible = "gpio-leds"; + led0 { + label = "panic"; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + led1 { + label = "heartbeat"; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + }; +}; + +&adc { +/* pinctrl-names = "default"; */ +/* pinctrl-0 = <&adc1_in6_pins_a>; */ + vdd-supply = <&vdd>; + vdda-supply = <&vdd>; + vref-supply = <&vrefbuf>; + status = "okay"; + + adc1: adc@0 { + pinctrl-names = "default"; + pinctrl-0 = <&adc1_in6_pins_a>; + st,min-sample-time-nsecs = <5000>; + st,adc-channels = <6>; + status = "disabled"; + }; + + adc2: adc@100 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + channel@12 { + reg = <12>; + label = "sense_temp"; + st,min-sample-time-ns = <9000>; + }; + channel@15 { + reg = <15>; + label = "vbat"; + st,min-sample-time-ns = <9000>; + }; + channel@16 { + reg = <16>; + label = "dac_out1"; + st,min-sample-time-ns = <9000>; + }; + channel@17 { + reg = <17>; + label = "dac_out1"; + st,min-sample-time-ns = <9000>; + }; + }; +}; + +&crc1 { + status = "okay"; +}; + +&cryp1 { + status = "okay"; +}; + +&dac { + pinctrl-names = "default"; + pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; + vref-supply = <&vdda>; + status = "disabled"; + + dac1: dac@1 { + status = "okay"; + }; + dac2: dac@2 { + status = "okay"; + }; +}; + +&dts { + status = "okay"; +}; + +ðernet0 { + status = "okay"; + snps,reset-gpio = <&gpioa 1 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 30000 50000>; + pinctrl-0 = <ðernet0_rmii_pins>; + pinctrl-1 = <ðernet0_rmii_pins_sleep>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <&phy0>; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck", + "syscfg-clk"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHSTP>, + <&rcc ETHCK_K>, + <&rcc SYSCFG>; + st,eth-ref-clk-sel; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gpu { + contiguous-area = <&gpu_reserved>; +}; + +&hash1 { + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "disabled"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_sleep_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = ; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = ; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = ; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = ; + regulator-always-on; + }; + + vdda: ldo6 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + interrupts = ; + regulator-boot-on; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = ; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = ; + regulator-active-discharge; + }; + + vbus_usbh: pwr_sw2 { + regulator-name = "usbh_vbus"; + interrupts = ; + regulator-always-on; + regulator-boot-on; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = , ; + interrupt-names = "onkey-falling", "onkey-rising"; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&i2c5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_pins_a>; + pinctrl-1 = <&i2c5_sleep_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "disabled"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2s2 { + status = "disabled"; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + interrupt-names = "wdg"; + recovery; + status = "okay"; +}; + +&pinctrl { + ethernet0_rmii_pins: eth0_mx-0 { + pins1 { + pinmux = , /* ETH1_CLK */ + , /* ETH1_MDC */ + , /* ETH1_TXD0 */ + ; /* ETH1_TXD1 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = ; /* ETH1_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = , /* ETH1_CRS_DV */ + , /* ETH1_RXD0 */ + ; /* ETH1_RXD1 */ + bias-disable; + }; + pins4 { + pinmux = ; /* ETH1_TX_EN */ + }; + }; + + ethernet0_rmii_pins_sleep: eth1_sleep_mx-0 { + pins { + pinmux = , /* ETH1_MDIO */ + , /* ETH1_CRS_DV */ + , /* ETH1_CLK */ + , /* ETH1_TX_EN */ + , /* ETH1_MDC */ + , /* ETH1_RXD0 */ + , /* ETH1_RXD1 */ + , /* ETH1_TXD0 */ + ; /* ETH1_TXD1 */ + }; + }; + + pwm1_pins_a: pwm1-0 { + pins { + pinmux = ; /* TIM1_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_a: pwm1-sleep-0 { + pins { + pinmux = ; /* TIM1_CH1 */ + }; + }; + + usart3_pins_a: usart3-0 { + pins1 { + pinmux = , /* USART3_TX */ + ; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* USART3_RX */ + ; /* USART3_CTS_NSS */ + bias-disable; + }; + }; + + usart3_idle_pins_a: usart3-idle-0 { + pins1 { + pinmux = , /* USART3_TX */ + , /* USART3_RTS */ + ; /* USART3_CTS_NSS */ + }; + pins2 { + pinmux = ; /* USART3_RX */ + bias-disable; + }; + }; + + usart3_sleep_pins_a: usart3-sleep-0 { + pins { + pinmux = , /* USART3_TX */ + , /* USART3_RTS */ + , /* USART3_CTS_NSS */ + ; /* USART3_RX */ + }; + }; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: is25lp016d@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <133000000>; + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc2 { + arm,primecell-periphid = <0x10153180>; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_b>; + pinctrl-1 = <&sdmmc2_b4_od_pins_b>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>; + non-removable; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + cs-gpios = <&gpioz 3 0>; + status = "disabled"; + + spidev@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <100000>; + }; +}; + +&timers1 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + pwm { + pinctrl-0 = <&pwm1_pins_a>; + pinctrl-1 = <&pwm1_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@0 { + status = "okay"; + }; +}; + +&timers4 { + /delete-property/dmas; + /delete-property/dma-names; + pwm { + pinctrl-0 = <&pwm4_pins_b>; + pinctrl-1 = <&pwm4_sleep_pins_b>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@3 { + status = "okay"; + }; +}; + +&timers5 { + /delete-property/dmas; + /delete-property/dma-names; + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@4 { + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + status = "okay"; +}; + +&usart2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usart2_pins_a>; + pinctrl-1 = <&usart2_sleep_pins_a>; + status = "okay"; +}; + +&usart3 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart3_pins_a>; + pinctrl-1 = <&usart3_sleep_pins_a>; + pinctrl-2 = <&usart3_idle_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + pinctrl-names = "default"; + pinctrl-0 = <&usbotg_hs_pins_a>; + phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + vbus-supply = <&vbus_otg>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; +