From patchwork Thu Jul 22 10:01:07 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Baruch Siach X-Patchwork-Id: 1508627 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pwm-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GVpBj2xF8z9sXJ for ; Thu, 22 Jul 2021 20:11:25 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231655AbhGVJas (ORCPT ); Thu, 22 Jul 2021 05:30:48 -0400 Received: from guitar.tcltek.co.il ([192.115.133.116]:39349 "EHLO mx.tkos.co.il" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231552AbhGVJar (ORCPT ); Thu, 22 Jul 2021 05:30:47 -0400 Received: from tarshish.tkos.co.il (unknown [10.0.8.2]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mx.tkos.co.il (Postfix) with ESMTPS id 3EDA44407CE; Thu, 22 Jul 2021 13:01:28 +0300 (IDT) From: Baruch Siach To: Thierry Reding , =?utf-8?q?Uwe_Kleine-K=C3=B6n?= =?utf-8?q?ig?= , Lee Jones Cc: Baruch Siach , Andy Gross , Bjorn Andersson , Balaji Prakash J , Rob Herring , Robert Marko , Kathiravan T , linux-pwm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 1/4] arm64: dts: ipq6018: correct TCSR block area Date: Thu, 22 Jul 2021 13:01:07 +0300 Message-Id: <889aae1b88f120cb6281919d27164a959fbe69d0.1626948070.git.baruch@tkos.co.il> X-Mailer: git-send-email 2.30.2 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pwm@vger.kernel.org According to Bjorn Andersson[1], &tcsr_q6 base is 0x01937000 with size 0x21000. Adjust qcom,halt-regs offsets (add 0xe000) to match the new syscon base. Also, rename to just &tcsr as Kathiravan T suggested. [1] https://lore.kernel.org/r/YLgO0Aj1d4w9EcPv@yoga Signed-off-by: Baruch Siach --- v6: Fix offset adjust (Kathiravan T) Rename &tcsr_q6 to &tcsr (Kathiravan T) v5: New patch in this series --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 6ee7b99c21ec..6bb262757cd9 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -270,9 +270,9 @@ tcsr_mutex_regs: syscon@1905000 { reg = <0x0 0x01905000 0x0 0x8000>; }; - tcsr_q6: syscon@1945000 { + tcsr: syscon@1937000 { compatible = "syscon"; - reg = <0x0 0x01945000 0x0 0xe000>; + reg = <0x0 0x01937000 0x0 0x21000>; }; blsp_dma: dma-controller@7884000 { @@ -615,7 +615,7 @@ q6v5_wcss: remoteproc@cd00000 { clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "prng"; - qcom,halt-regs = <&tcsr_q6 0xa000 0xd000 0x0>; + qcom,halt-regs = <&tcsr 0x18000 0x1b000 0xe000>; qcom,smem-states = <&wcss_smp2p_out 0>, <&wcss_smp2p_out 1>; From patchwork Thu Jul 22 10:01:08 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Baruch Siach X-Patchwork-Id: 1508626 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pwm-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GVp3929DHz9sXM for ; Thu, 22 Jul 2021 20:04:53 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231666AbhGVJYP (ORCPT ); Thu, 22 Jul 2021 05:24:15 -0400 Received: from guitar.tcltek.co.il ([192.115.133.116]:39303 "EHLO mx.tkos.co.il" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231355AbhGVJXx (ORCPT ); Thu, 22 Jul 2021 05:23:53 -0400 Received: from tarshish.tkos.co.il (unknown [10.0.8.2]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mx.tkos.co.il (Postfix) with ESMTPS id C810244086C; Thu, 22 Jul 2021 13:01:28 +0300 (IDT) From: Baruch Siach To: Thierry Reding , =?utf-8?q?Uwe_Kleine-K=C3=B6n?= =?utf-8?q?ig?= , Lee Jones Cc: Baruch Siach , Andy Gross , Bjorn Andersson , Balaji Prakash J , Rob Herring , Robert Marko , Kathiravan T , linux-pwm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 2/4] pwm: driver for qualcomm ipq6018 pwm block Date: Thu, 22 Jul 2021 13:01:08 +0300 Message-Id: <2c4df635c57085fc33150d1b9a97845694e63e03.1626948070.git.baruch@tkos.co.il> X-Mailer: git-send-email 2.30.2 In-Reply-To: <889aae1b88f120cb6281919d27164a959fbe69d0.1626948070.git.baruch@tkos.co.il> References: <889aae1b88f120cb6281919d27164a959fbe69d0.1626948070.git.baruch@tkos.co.il> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pwm@vger.kernel.org Driver for the PWM block in Qualcomm IPQ6018 line of SoCs. Based on driver from downstream Codeaurora kernel tree. Removed support for older (V1) variants because I have no access to that hardware. Tested on IPQ6010 based hardware. Signed-off-by: Baruch Siach --- v6: Address Uwe Kleine-König review comments: Drop IPQ_PWM_MAX_DEVICES Rely on assigned-clock-rates; drop IPQ_PWM_CLK_SRC_FREQ Simplify register offset calculation Calculate duty cycle more precisely Refuse to set inverted polarity Drop redundant IPQ_PWM_REG1_ENABLE bit clear Remove x1000 factor in pwm_div calculation, use rate directly, and round up Choose initial pre_div such that pwm_div < IPQ_PWM_MAX_DIV Ensure pre_div <= pwm_div Rename close_ to best_ Explain in comment why effective_div doesn't overflow Limit pwm_div to IPQ_PWM_MAX_DIV - 1 to allow 100% duty cycle Disable clock only after pwmchip_remove() const pwm_ops Other changes: Add missing linux/bitfield.h header include (kernel test robot) Adjust code for PWM device node under TCSR (Rob Herring) v5: Use &tcsr_q6 syscon to access registers (Bjorn Andersson) Address Uwe Kleine-König review comments: Implement .get_state() Add IPQ_PWM_ prefix to local macros Use GENMASK/BIT/FIELD_PREP for register fields access Make type of config_div_and_duty() parameters consistent Derive IPQ_PWM_MIN_PERIOD_NS from IPQ_PWM_CLK_SRC_FREQ Integrate enable/disable into config_div_and_duty() to save register read, and reduce frequency glitch on update Use min() instead of min_t() Fix comment format Use dev_err_probe() to indicate probe step failure Add missing clk_disable_unprepare() in .remove Don't set .owner v4: Use div64_u64() to fix link for 32-bit targets ((kernel test robot , Uwe Kleine-König) v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring) Fix integer overflow on 32-bit targets (kernel test robot ) v2: Address Uwe Kleine-König review comments: Fix period calculation when out of range Don't set period larger than requested Remove PWM disable on configuration change Implement .apply instead of non-atomic .config/.enable/.disable Don't modify PWM on .request/.free Check pwm_div underflow Fix various code and comment formatting issues Other changes: Use u64 divisor safe division Remove now empty .request/.free --- drivers/pwm/Kconfig | 12 ++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-ipq.c | 276 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 289 insertions(+) create mode 100644 drivers/pwm/pwm-ipq.c diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index c76adedd58c9..08add845596f 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -260,6 +260,18 @@ config PWM_INTEL_LGM To compile this driver as a module, choose M here: the module will be called pwm-intel-lgm. +config PWM_IPQ + tristate "IPQ PWM support" + depends on ARCH_QCOM || COMPILE_TEST + depends on HAVE_CLK && HAS_IOMEM + help + Generic PWM framework driver for IPQ PWM block which supports + 4 pwm channels. Each of the these channels can be configured + independent of each other. + + To compile this driver as a module, choose M here: the module + will be called pwm-ipq. + config PWM_IQS620A tristate "Azoteq IQS620A PWM support" depends on MFD_IQS62X || COMPILE_TEST diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 708840b7fba8..7402feae4b36 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_PWM_IMX1) += pwm-imx1.o obj-$(CONFIG_PWM_IMX27) += pwm-imx27.o obj-$(CONFIG_PWM_IMX_TPM) += pwm-imx-tpm.o obj-$(CONFIG_PWM_INTEL_LGM) += pwm-intel-lgm.o +obj-$(CONFIG_PWM_IPQ) += pwm-ipq.o obj-$(CONFIG_PWM_IQS620A) += pwm-iqs620a.o obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o obj-$(CONFIG_PWM_KEEMBAY) += pwm-keembay.o diff --git a/drivers/pwm/pwm-ipq.c b/drivers/pwm/pwm-ipq.c new file mode 100644 index 000000000000..19f7ed93dc81 --- /dev/null +++ b/drivers/pwm/pwm-ipq.c @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/* + * Copyright (c) 2016-2017, 2020 The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* The frequency range supported is 1 Hz to clock rate */ +#define IPQ_PWM_MAX_PERIOD_NS ((u64)NSEC_PER_SEC) + +/* + * The max value specified for each field is based on the number of bits + * in the pwm control register for that field + */ +#define IPQ_PWM_MAX_DIV 0xFFFF + +/* + * Two 32-bit registers for each PWM: REG0, and REG1. + * Base offset for PWM #i is at 8 * #i. + */ +#define IPQ_PWM_CFG_REG0 0 /*PWM_DIV PWM_HI*/ +#define IPQ_PWM_REG0_PWM_DIV GENMASK(15, 0) +#define IPQ_PWM_REG0_HI_DURATION GENMASK(31, 16) + +#define IPQ_PWM_CFG_REG1 4 /*ENABLE UPDATE PWM_PRE_DIV*/ +#define IPQ_PWM_REG1_PRE_DIV GENMASK(15, 0) +/* + * Enable bit is set to enable output toggling in pwm device. + * Update bit is set to reflect the changed divider and high duration + * values in register. + */ +#define IPQ_PWM_REG1_UPDATE BIT(30) +#define IPQ_PWM_REG1_ENABLE BIT(31) + + +struct ipq_pwm_chip { + struct pwm_chip chip; + struct clk *clk; + struct regmap *regmap; + u32 regmap_off; +}; + +static struct ipq_pwm_chip *to_ipq_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct ipq_pwm_chip, chip); +} + +static unsigned int ipq_pwm_reg_read(struct pwm_device *pwm, unsigned reg) +{ + struct ipq_pwm_chip *ipq_chip = to_ipq_pwm_chip(pwm->chip); + unsigned int off = ipq_chip->regmap_off + 8 * pwm->hwpwm + reg; + unsigned int val; + + regmap_read(ipq_chip->regmap, off, &val); + + return val; +} + +static void ipq_pwm_reg_write(struct pwm_device *pwm, unsigned reg, + unsigned val) +{ + struct ipq_pwm_chip *ipq_chip = to_ipq_pwm_chip(pwm->chip); + unsigned int off = ipq_chip->regmap_off + 8 * pwm->hwpwm + reg; + + regmap_write(ipq_chip->regmap, off, val); +} + +static void config_div_and_duty(struct pwm_device *pwm, unsigned int pre_div, + unsigned int pwm_div, unsigned long rate, u64 duty_ns, + bool enable) +{ + unsigned long hi_dur; + unsigned long val = 0; + + /* + * high duration = pwm duty * (pwm div + 1) + * pwm duty = duty_ns / period_ns + */ + hi_dur = div64_u64(duty_ns * rate, (pre_div + 1) * NSEC_PER_SEC); + + val = FIELD_PREP(IPQ_PWM_REG0_HI_DURATION, hi_dur) | + FIELD_PREP(IPQ_PWM_REG0_PWM_DIV, pwm_div); + ipq_pwm_reg_write(pwm, IPQ_PWM_CFG_REG0, val); + + val = FIELD_PREP(IPQ_PWM_REG1_PRE_DIV, pre_div); + ipq_pwm_reg_write(pwm, IPQ_PWM_CFG_REG1, val); + + /* Enable needs a separate write to REG1 */ + val |= IPQ_PWM_REG1_UPDATE; + if (enable) + val |= IPQ_PWM_REG1_ENABLE; + ipq_pwm_reg_write(pwm, IPQ_PWM_CFG_REG1, val); +} + +static int ipq_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct ipq_pwm_chip *ipq_chip = to_ipq_pwm_chip(chip); + unsigned long freq; + unsigned int pre_div, pwm_div, best_pre_div, best_pwm_div; + long long diff; + unsigned long rate = clk_get_rate(ipq_chip->clk); + unsigned long min_diff = rate; + u64 period_ns, duty_ns; + + if (state->polarity != PWM_POLARITY_NORMAL) + return -EINVAL; + + if (state->period < div64_u64(NSEC_PER_SEC, rate)) + return -ERANGE; + + period_ns = min(state->period, IPQ_PWM_MAX_PERIOD_NS); + duty_ns = min(state->duty_cycle, period_ns); + + /* freq in Hz for period in nano second */ + freq = div64_u64(NSEC_PER_SEC, period_ns); + best_pre_div = IPQ_PWM_MAX_DIV; + best_pwm_div = IPQ_PWM_MAX_DIV; + /* Initial pre_div value such that pwm_div < IPQ_PWM_MAX_DIV */ + pre_div = DIV64_U64_ROUND_UP(period_ns * rate, + (u64)NSEC_PER_SEC * (IPQ_PWM_MAX_DIV + 1)); + + for (; pre_div <= IPQ_PWM_MAX_DIV; pre_div++) { + pwm_div = DIV64_U64_ROUND_UP(period_ns * rate, + (u64)NSEC_PER_SEC * (pre_div + 1)); + pwm_div--; + + if (pre_div > pwm_div) + break; + + /* + * Make sure we can do 100% duty cycle where + * hi_dur == pwm_div + 1 + */ + if (pwm_div > IPQ_PWM_MAX_DIV - 1) + continue; + + diff = ((uint64_t)freq * (pre_div + 1) * (pwm_div + 1)) + - (uint64_t)rate; + + if (diff < 0) /* period larger than requested */ + continue; + if (diff == 0) { /* bingo */ + best_pre_div = pre_div; + best_pwm_div = pwm_div; + break; + } + if (diff < min_diff) { + min_diff = diff; + best_pre_div = pre_div; + best_pwm_div = pwm_div; + } + } + + /* config divider values for the closest possible frequency */ + config_div_and_duty(pwm, best_pre_div, best_pwm_div, + rate, duty_ns, state->enabled); + + return 0; +} + +static void ipq_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, + struct pwm_state *state) +{ + struct ipq_pwm_chip *ipq_chip = to_ipq_pwm_chip(chip); + unsigned long rate = clk_get_rate(ipq_chip->clk); + unsigned int pre_div, pwm_div, hi_dur; + u64 effective_div, hi_div; + u32 reg0, reg1; + + reg0 = ipq_pwm_reg_read(pwm, IPQ_PWM_CFG_REG0); + reg1 = ipq_pwm_reg_read(pwm, IPQ_PWM_CFG_REG1); + + state->polarity = PWM_POLARITY_NORMAL; + state->enabled = reg1 & IPQ_PWM_REG1_ENABLE; + + pwm_div = FIELD_GET(IPQ_PWM_REG0_PWM_DIV, reg0); + hi_dur = FIELD_GET(IPQ_PWM_REG0_HI_DURATION, reg0); + pre_div = FIELD_GET(IPQ_PWM_REG1_PRE_DIV, reg1); + + /* No overflow here, both pre_div and pwm_div <= 0xffff */ + effective_div = (u64)(pre_div + 1) * (pwm_div + 1); + state->period = div64_u64(effective_div * NSEC_PER_SEC, rate); + + hi_div = hi_dur * (pre_div + 1); + state->duty_cycle = div64_u64(hi_div * NSEC_PER_SEC, rate); +} + +static const struct pwm_ops ipq_pwm_ops = { + .apply = ipq_pwm_apply, + .get_state = ipq_pwm_get_state, + .owner = THIS_MODULE, +}; + +static int ipq_pwm_probe(struct platform_device *pdev) +{ + struct ipq_pwm_chip *pwm; + struct device *dev = &pdev->dev; + int ret; + + pwm = devm_kzalloc(dev, sizeof(*pwm), GFP_KERNEL); + if (!pwm) + return -ENOMEM; + + platform_set_drvdata(pdev, pwm); + + pwm->regmap = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(pwm->regmap)) + return dev_err_probe(dev, PTR_ERR(pwm->regmap), + "regs map failed"); + + ret = of_property_read_u32(dev->of_node, "offset", &pwm->regmap_off); + if (ret) + return dev_err_probe(dev, ret, "error reading 'offset'"); + + pwm->clk = devm_clk_get(dev, "core"); + if (IS_ERR(pwm->clk)) + return dev_err_probe(dev, PTR_ERR(pwm->clk), + "failed to get core clock"); + + ret = clk_prepare_enable(pwm->clk); + if (ret) + return dev_err_probe(dev, ret, "clock enable failed"); + + pwm->chip.dev = dev; + pwm->chip.ops = &ipq_pwm_ops; + pwm->chip.npwm = 4; + + ret = pwmchip_add(&pwm->chip); + if (ret < 0) { + dev_err_probe(dev, ret, "pwmchip_add() failed\n"); + clk_disable_unprepare(pwm->clk); + return ret; + } + + return 0; +} + +static int ipq_pwm_remove(struct platform_device *pdev) +{ + struct ipq_pwm_chip *pwm = platform_get_drvdata(pdev); + + pwmchip_remove(&pwm->chip); + clk_disable_unprepare(pwm->clk); + + return 0; +} + +static const struct of_device_id pwm_ipq_dt_match[] = { + { .compatible = "qcom,ipq6018-pwm", }, + {} +}; +MODULE_DEVICE_TABLE(of, pwm_ipq_dt_match); + +static struct platform_driver ipq_pwm_driver = { + .driver = { + .name = "ipq-pwm", + .of_match_table = pwm_ipq_dt_match, + }, + .probe = ipq_pwm_probe, + .remove = ipq_pwm_remove, +}; + +module_platform_driver(ipq_pwm_driver); + +MODULE_LICENSE("Dual BSD/GPL"); From patchwork Thu Jul 22 10:01:09 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Baruch Siach X-Patchwork-Id: 1508625 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pwm-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GVp380SSkz9sXJ for ; Thu, 22 Jul 2021 20:04:52 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231325AbhGVJYP (ORCPT ); Thu, 22 Jul 2021 05:24:15 -0400 Received: from guitar.tcltek.co.il ([192.115.133.116]:39310 "EHLO mx.tkos.co.il" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231553AbhGVJXx (ORCPT ); Thu, 22 Jul 2021 05:23:53 -0400 Received: from tarshish.tkos.co.il (unknown [10.0.8.2]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mx.tkos.co.il (Postfix) with ESMTPS id B0981440E49; Thu, 22 Jul 2021 13:01:29 +0300 (IDT) From: Baruch Siach To: Thierry Reding , =?utf-8?q?Uwe_Kleine-K=C3=B6n?= =?utf-8?q?ig?= , Lee Jones Cc: Baruch Siach , Andy Gross , Bjorn Andersson , Balaji Prakash J , Rob Herring , Robert Marko , Kathiravan T , linux-pwm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 3/4] dt-bindings: pwm: add IPQ6018 binding Date: Thu, 22 Jul 2021 13:01:09 +0300 Message-Id: <70f0522a9394e9da2f31871442d47f6ad0ff41aa.1626948070.git.baruch@tkos.co.il> X-Mailer: git-send-email 2.30.2 In-Reply-To: <889aae1b88f120cb6281919d27164a959fbe69d0.1626948070.git.baruch@tkos.co.il> References: <889aae1b88f120cb6281919d27164a959fbe69d0.1626948070.git.baruch@tkos.co.il> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pwm@vger.kernel.org DT binding for the PWM block in Qualcomm IPQ6018 SoC. Signed-off-by: Baruch Siach --- v6: Device node is child of TCSR; remove phandle (Rob Herring) Add assigned-clocks/assigned-clock-rates (Uwe Kleine-König) v5: Use qcom,pwm-regs for phandle instead of direct regs (Bjorn Andersson, Kathiravan T) v4: Update the binding example node as well (Rob Herring's bot) v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring) v2: Make #pwm-cells const (Rob Herring) --- .../devicetree/bindings/pwm/ipq-pwm.yaml | 69 +++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/ipq-pwm.yaml diff --git a/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml b/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml new file mode 100644 index 000000000000..ee2bb03a1223 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/ipq-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ6018 PWM controller + +maintainers: + - Baruch Siach + +properties: + "#pwm-cells": + const: 2 + + compatible: + const: qcom,ipq6018-pwm + + offset: + description: | + Offset of PWM register in the TCSR block. + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: core + + assigned-clocks: + maxItems: 1 + + assigned-clock-rates: + maxItems: 1 + +required: + - "#pwm-cells" + - compatible + - clocks + - clock-names + - assigned-clocks + - assigned-clock-rates + +additionalProperties: false + +examples: + - | + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + tcsr: syscon@1937000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x01937000 0x0 0x21000>; + + pwm: pwm { + #pwm-cells = <2>; + compatible = "qcom,ipq6018-pwm"; + offset = <0xa010>; + clocks = <&gcc GCC_ADSS_PWM_CLK>; + clock-names = "core"; + assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + }; + }; From patchwork Thu Jul 22 10:01:10 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Baruch Siach X-Patchwork-Id: 1508624 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pwm-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GVp2r4GHsz9sXJ for ; Thu, 22 Jul 2021 20:04:36 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231673AbhGVJX7 (ORCPT ); Thu, 22 Jul 2021 05:23:59 -0400 Received: from guitar.tcltek.co.il ([192.115.133.116]:39320 "EHLO mx.tkos.co.il" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231586AbhGVJXx (ORCPT ); Thu, 22 Jul 2021 05:23:53 -0400 Received: from tarshish.tkos.co.il (unknown [10.0.8.2]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mx.tkos.co.il (Postfix) with ESMTPS id 7C3A6440E6E; Thu, 22 Jul 2021 13:01:30 +0300 (IDT) From: Baruch Siach To: Thierry Reding , =?utf-8?q?Uwe_Kleine-K=C3=B6n?= =?utf-8?q?ig?= , Lee Jones Cc: Baruch Siach , Andy Gross , Bjorn Andersson , Balaji Prakash J , Rob Herring , Robert Marko , Kathiravan T , linux-pwm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 4/4] arm64: dts: ipq6018: add pwm node Date: Thu, 22 Jul 2021 13:01:10 +0300 Message-Id: X-Mailer: git-send-email 2.30.2 In-Reply-To: <889aae1b88f120cb6281919d27164a959fbe69d0.1626948070.git.baruch@tkos.co.il> References: <889aae1b88f120cb6281919d27164a959fbe69d0.1626948070.git.baruch@tkos.co.il> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pwm@vger.kernel.org Describe the PWM block on IPQ6018. The PWM is in the TCSR area. Make &tcsr "simple-mfd" compatible, and add &pwm as child of &tcsr. Signed-off-by: Baruch Siach --- v6: Make the PWM node child of TCSR (Rob Herring) Add assigned-clocks/assigned-clock-rates (Uwe Kleine-König) v5: Use qcom,pwm-regs for TCSR phandle instead of direct regs v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring) --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 6bb262757cd9..2a95a24175ad 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -271,8 +271,19 @@ tcsr_mutex_regs: syscon@1905000 { }; tcsr: syscon@1937000 { - compatible = "syscon"; + compatible = "syscon", "simple-mfd"; reg = <0x0 0x01937000 0x0 0x21000>; + + pwm: pwm { + #pwm-cells = <2>; + compatible = "qcom,ipq6018-pwm"; + offset = <0xa010>; + clocks = <&gcc GCC_ADSS_PWM_CLK>; + clock-names = "core"; + assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; }; blsp_dma: dma-controller@7884000 {