From patchwork Thu Jul 1 07:44:55 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?6ZmI5Y2O5omN?= X-Patchwork-Id: 1499426 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GFqxN5nfJz9sV8 for ; Thu, 1 Jul 2021 17:44:56 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234635AbhGAHrZ (ORCPT ); Thu, 1 Jul 2021 03:47:25 -0400 Received: from mail.kernel.org ([198.145.29.99]:50708 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229906AbhGAHrZ (ORCPT ); Thu, 1 Jul 2021 03:47:25 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id EA0DF61490; Thu, 1 Jul 2021 07:44:53 +0000 (UTC) From: Huacai Chen To: Bjorn Helgaas Cc: linux-pci@vger.kernel.org, Xuefeng Li , Huacai Chen , Jiaxun Yang , Huacai Chen Subject: [PATCH V6 1/4] PCI: Improve the MRRS quirk for LS7A Date: Thu, 1 Jul 2021 15:44:55 +0800 Message-Id: <20210701074458.1809532-2-chenhuacai@loongson.cn> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210701074458.1809532-1-chenhuacai@loongson.cn> References: <20210701074458.1809532-1-chenhuacai@loongson.cn> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org In new revision of LS7A, some PCIe ports support larger value than 256, but their maximum supported MRRS values are not detectable. Moreover, the current loongson_mrrs_quirk() cannot avoid devices increasing its MRRS after pci_enable_device(), and some devices (e.g. Realtek 8169) will actually set a big value in its driver. So the only possible way is configure MRRS of all devices in BIOS, and add a pci host bridge bit flag (i.e., no_inc_mrrs) to stop the increasing MRRS operations. However, according to PCIe Spec, it is legal for an OS to program any value for MRRS, and it is also legal for an endpoint to generate a Read Request with any size up to its MRRS. As the hardware engineers say, the root cause here is LS7A doesn't break up large read requests. In detail, LS7A PCIe port reports CA (Completer Abort) if it receives a Memory Read request with a size that's "too big" ("too big" means larger than the PCIe ports can handle, which means 256 for some ports and 4096 for the others, and of course this is a problem in the LS7A's hardware design). Signed-off-by: Huacai Chen --- drivers/pci/controller/pci-loongson.c | 47 ++++++++++----------------- drivers/pci/pci.c | 6 ++++ include/linux/pci.h | 1 + 3 files changed, 25 insertions(+), 29 deletions(-) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index 48169b1e3817..b02c98723f3b 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -60,37 +60,26 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_LPC, system_bus_quirk); -static void loongson_mrrs_quirk(struct pci_dev *dev) +static void loongson_mrrs_quirk(struct pci_dev *pdev) { - struct pci_bus *bus = dev->bus; - struct pci_dev *bridge; - static const struct pci_device_id bridge_devids[] = { - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) }, - { 0, }, - }; - - /* look for the matching bridge */ - while (!pci_is_root_bus(bus)) { - bridge = bus->self; - bus = bus->parent; - /* - * Some Loongson PCIe ports have a h/w limitation of - * 256 bytes maximum read request size. They can't handle - * anything larger than this. So force this limit on - * any devices attached under these ports. - */ - if (pci_match_id(bridge_devids, bridge)) { - if (pcie_get_readrq(dev) > 256) { - pci_info(dev, "limiting MRRS to 256\n"); - pcie_set_readrq(dev, 256); - } - break; - } - } + /* + * Some Loongson PCIe ports have h/w limitations of maximum read + * request size. They can't handle anything larger than this. So + * force this limit on any devices attached under these ports. + */ + struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); + + if (!bridge) + return; + + bridge->no_inc_mrrs = 1; } -DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, loongson_mrrs_quirk); static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, unsigned int devfn, int where) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 8d4ebe095d0c..34986a153cd1 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -5794,6 +5794,7 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) { u16 v; int ret; + struct pci_host_bridge *bridge = pci_find_host_bridge(dev->bus); if (rq < 128 || rq > 4096 || !is_power_of_2(rq)) return -EINVAL; @@ -5812,6 +5813,11 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) v = (ffs(rq) - 8) << 12; + if (bridge->no_inc_mrrs) { + if (rq > pcie_get_readrq(dev)) + return -EINVAL; + } + ret = pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_READRQ, v); diff --git a/include/linux/pci.h b/include/linux/pci.h index 24306504226a..5cdf926000fc 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -541,6 +541,7 @@ struct pci_host_bridge { void *release_data; unsigned int ignore_reset_delay:1; /* For entire hierarchy */ unsigned int no_ext_tags:1; /* No Extended Tags */ + unsigned int no_inc_mrrs:1; /* No Increase MRRS */ unsigned int native_aer:1; /* OS may use PCIe AER */ unsigned int native_pcie_hotplug:1; /* OS may use PCIe hotplug */ unsigned int native_shpc_hotplug:1; /* OS may use SHPC hotplug */ From patchwork Thu Jul 1 07:44:56 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?6ZmI5Y2O5omN?= X-Patchwork-Id: 1499427 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GFqyD3tDkz9sV8 for ; Thu, 1 Jul 2021 17:45:40 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234697AbhGAHsJ (ORCPT ); Thu, 1 Jul 2021 03:48:09 -0400 Received: from mail.kernel.org ([198.145.29.99]:50940 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229906AbhGAHsJ (ORCPT ); Thu, 1 Jul 2021 03:48:09 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id B57ED61490; Thu, 1 Jul 2021 07:45:37 +0000 (UTC) From: Huacai Chen To: Bjorn Helgaas Cc: linux-pci@vger.kernel.org, Xuefeng Li , Huacai Chen , Jiaxun Yang , Huacai Chen Subject: [PATCH V6 2/4] PCI: Move loongson pci quirks to quirks.c Date: Thu, 1 Jul 2021 15:44:56 +0800 Message-Id: <20210701074458.1809532-3-chenhuacai@loongson.cn> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210701074458.1809532-1-chenhuacai@loongson.cn> References: <20210701074458.1809532-1-chenhuacai@loongson.cn> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Loongson PCH (LS7A chipset) will be used by both MIPS-based and LoongArch-based Loongson processors. MIPS-based Loongson uses FDT but LoongArch-base Loongson uses ACPI, but the driver in drivers/ pci/controller/pci-loongson.c is FDT-only. So move the quirks to quirks.c where can be shared by all architectures. LoongArch is a new RISC ISA, mainline support will come soon, and documentations are here (in translation): https://github.com/loongson/LoongArch-Documentation Signed-off-by: Huacai Chen --- drivers/pci/controller/pci-loongson.c | 58 --------------------------- drivers/pci/quirks.c | 58 +++++++++++++++++++++++++++ 2 files changed, 58 insertions(+), 58 deletions(-) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index b02c98723f3b..88066e9db69e 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -12,15 +12,6 @@ #include "../pci.h" -/* Device IDs */ -#define DEV_PCIE_PORT_0 0x7a09 -#define DEV_PCIE_PORT_1 0x7a19 -#define DEV_PCIE_PORT_2 0x7a29 - -#define DEV_LS2K_APB 0x7a02 -#define DEV_LS7A_CONF 0x7a10 -#define DEV_LS7A_LPC 0x7a0c - #define FLAG_CFG0 BIT(0) #define FLAG_CFG1 BIT(1) #define FLAG_DEV_FIX BIT(2) @@ -32,55 +23,6 @@ struct loongson_pci { u32 flags; }; -/* Fixup wrong class code in PCIe bridges */ -static void bridge_class_quirk(struct pci_dev *dev) -{ - dev->class = PCI_CLASS_BRIDGE_PCI << 8; -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_0, bridge_class_quirk); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_1, bridge_class_quirk); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_2, bridge_class_quirk); - -static void system_bus_quirk(struct pci_dev *pdev) -{ - /* - * The address space consumed by these devices is outside the - * resources of the host bridge. - */ - pdev->mmio_always_on = 1; - pdev->non_compliant_bars = 1; -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_LS2K_APB, system_bus_quirk); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_LS7A_CONF, system_bus_quirk); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_LS7A_LPC, system_bus_quirk); - -static void loongson_mrrs_quirk(struct pci_dev *pdev) -{ - /* - * Some Loongson PCIe ports have h/w limitations of maximum read - * request size. They can't handle anything larger than this. So - * force this limit on any devices attached under these ports. - */ - struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); - - if (!bridge) - return; - - bridge->no_inc_mrrs = 1; -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_0, loongson_mrrs_quirk); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_1, loongson_mrrs_quirk); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_2, loongson_mrrs_quirk); - static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, unsigned int devfn, int where) { diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 22b2bb1109c9..febc53943051 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -205,6 +205,64 @@ static void quirk_mmio_always_on(struct pci_dev *dev) DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); +/* Device IDs */ +#define DEV_PCIE_PORT_0 0x7a09 +#define DEV_PCIE_PORT_1 0x7a19 +#define DEV_PCIE_PORT_2 0x7a29 + +#define DEV_LS2K_APB 0x7a02 +#define DEV_LS7A_CONF 0x7a10 +#define DEV_LS7A_LPC 0x7a0c + +/* Fixup wrong class code in PCIe bridges */ +static void bridge_class_quirk(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_PCI << 8; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, bridge_class_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, bridge_class_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, bridge_class_quirk); + +static void system_bus_quirk(struct pci_dev *pdev) +{ + /* + * The address space consumed by these devices is outside the + * resources of the host bridge. + */ + pdev->mmio_always_on = 1; + pdev->non_compliant_bars = 1; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS2K_APB, system_bus_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_CONF, system_bus_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_LPC, system_bus_quirk); + +static void loongson_mrrs_quirk(struct pci_dev *pdev) +{ + /* + * Some Loongson PCIe ports have h/w limitations of maximum read + * request size. They can't handle anything larger than this. So + * force this limit on any devices attached under these ports. + */ + struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); + + if (!bridge) + return; + + bridge->no_inc_mrrs = 1; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, loongson_mrrs_quirk); + /* * The Mellanox Tavor device gives false positive parity errors. Disable * parity error reporting. From patchwork Thu Jul 1 07:44:57 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?6ZmI5Y2O5omN?= X-Patchwork-Id: 1499429 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GFqz33q5cz9sV8 for ; Thu, 1 Jul 2021 17:46:23 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234839AbhGAHsv (ORCPT ); Thu, 1 Jul 2021 03:48:51 -0400 Received: from mail.kernel.org ([198.145.29.99]:51124 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229906AbhGAHsv (ORCPT ); Thu, 1 Jul 2021 03:48:51 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id 9C46E61417; Thu, 1 Jul 2021 07:46:19 +0000 (UTC) From: Huacai Chen To: Bjorn Helgaas Cc: linux-pci@vger.kernel.org, Xuefeng Li , Huacai Chen , Jiaxun Yang , Huacai Chen Subject: [PATCH V6 3/4] PCI: Add quirk for LS7A to avoid reboot failure Date: Thu, 1 Jul 2021 15:44:57 +0800 Message-Id: <20210701074458.1809532-4-chenhuacai@loongson.cn> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210701074458.1809532-1-chenhuacai@loongson.cn> References: <20210701074458.1809532-1-chenhuacai@loongson.cn> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Commit cc27b735ad3a75574a ("PCI/portdrv: Turn off PCIe services during shutdown") causes poweroff/reboot failure on systems with LS7A chipset. We found that if we remove "pci_command &= ~PCI_COMMAND_MASTER;" in do_pci_disable_device(), it can work well. The hardware engineer says that the root cause is that CPU is still accessing PCIe devices while poweroff/reboot, and if we disable the Bus Master Bit at this time, the PCIe controller doesn't forward requests to downstream devices, and also doesn't send TIMEOUT to CPU, which causes CPU wait forever (hardware deadlock). This behavior is a PCIe protocol violation (Bus Master should not be involved in CPU MMIO transactions), and it will be fixed in new revisions of hardware (add timeout mechanism for CPU read request, whether or not Bus Master bit is cleared). On some x86 platforms, radeon/amdgpu devices can cause similar problems [1][2]. Once before I wanted to make a single patch to solve "all of these problems" together, but it seems unreasonable because maybe they are not exactly the same problem. So, this patch just add a quirk for LS7A to avoid clearing Bus Master bit in pcie_port_device_remove(), and leave other platforms as is. [1] https://bugs.freedesktop.org/show_bug.cgi?id=97980 [2] https://bugs.freedesktop.org/show_bug.cgi?id=98638 Signed-off-by: Huacai Chen --- drivers/pci/pcie/portdrv_core.c | 6 +++++- drivers/pci/quirks.c | 21 +++++++++++++++++++++ include/linux/pci.h | 1 + 3 files changed, 27 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index e1fed6649c41..7f9549a1f48b 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -486,9 +486,13 @@ EXPORT_SYMBOL_GPL(pcie_port_find_device); */ void pcie_port_device_remove(struct pci_dev *dev) { + struct pci_host_bridge *bridge = pci_find_host_bridge(dev->bus); + device_for_each_child(&dev->dev, NULL, remove_iter); pci_free_irq_vectors(dev); - pci_disable_device(dev); + + if (!bridge->no_dis_bmaster) + pci_disable_device(dev); } /** diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index febc53943051..b1a13d8fe3b6 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -263,6 +263,27 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DEV_PCIE_PORT_2, loongson_mrrs_quirk); +static void loongson_bmaster_quirk(struct pci_dev *pdev) +{ + /* + * Some Loongson PCIe ports have h/w limitations of maximum read + * request size. They can't handle anything larger than this. So + * force this limit on any devices attached under these ports. + */ + struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); + + if (!bridge) + return; + + bridge->no_dis_bmaster = 1; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, loongson_bmaster_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, loongson_bmaster_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, loongson_bmaster_quirk); + /* * The Mellanox Tavor device gives false positive parity errors. Disable * parity error reporting. diff --git a/include/linux/pci.h b/include/linux/pci.h index 5cdf926000fc..74a7da2e8996 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -542,6 +542,7 @@ struct pci_host_bridge { unsigned int ignore_reset_delay:1; /* For entire hierarchy */ unsigned int no_ext_tags:1; /* No Extended Tags */ unsigned int no_inc_mrrs:1; /* No Increase MRRS */ + unsigned int no_dis_bmaster:1; /* No Disable Bus Master */ unsigned int native_aer:1; /* OS may use PCIe AER */ unsigned int native_pcie_hotplug:1; /* OS may use PCIe hotplug */ unsigned int native_shpc_hotplug:1; /* OS may use SHPC hotplug */ From patchwork Thu Jul 1 07:44:58 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?6ZmI5Y2O5omN?= X-Patchwork-Id: 1499430 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GFqzS5vVCz9sV8 for ; Thu, 1 Jul 2021 17:46:44 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234865AbhGAHtN (ORCPT ); Thu, 1 Jul 2021 03:49:13 -0400 Received: from mail.kernel.org ([198.145.29.99]:51202 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229906AbhGAHtM (ORCPT ); Thu, 1 Jul 2021 03:49:12 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id 9C15561490; Thu, 1 Jul 2021 07:46:40 +0000 (UTC) From: Huacai Chen To: Bjorn Helgaas Cc: linux-pci@vger.kernel.org, Xuefeng Li , Huacai Chen , Jiaxun Yang , Jianmin Lv , Huacai Chen Subject: [PATCH V6 4/4] PCI: Add quirk for multifunction devices of LS7A Date: Thu, 1 Jul 2021 15:44:58 +0800 Message-Id: <20210701074458.1809532-5-chenhuacai@loongson.cn> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210701074458.1809532-1-chenhuacai@loongson.cn> References: <20210701074458.1809532-1-chenhuacai@loongson.cn> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Jianmin Lv In LS7A, multifunction device use same PCI PIN (because the PIN register report the same INTx value to each function) but we need different IRQ for different functions, so add a quirk to fix it for standard PCI PIN usage. This patch only affect ACPI based systems (and only needed by ACPI based systems, too). For DT based systems, the irq mappings is defined in .dts files and be handled by of_irq_parse_pci(). Signed-off-by: Jianmin Lv Signed-off-by: Huacai Chen --- drivers/pci/quirks.c | 23 +++++++++++++++++++++++ include/linux/pci_ids.h | 11 +++++++++++ 2 files changed, 34 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index b1a13d8fe3b6..f52f203c4209 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -284,6 +284,29 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DEV_PCIE_PORT_2, loongson_bmaster_quirk); +static void loongson_pci_pin_quirk(struct pci_dev *pdev) +{ + pdev->pin = 1 + (PCI_FUNC(pdev->devfn) & 3); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + PCI_DEVICE_ID_LOONGSON_AHCI, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + PCI_DEVICE_ID_LOONGSON_EHCI, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + PCI_DEVICE_ID_LOONGSON_OHCI, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + PCI_DEVICE_ID_LOONGSON_DC, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + PCI_DEVICE_ID_LOONGSON_GPU, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + PCI_DEVICE_ID_LOONGSON_GMAC, loongson_pci_pin_quirk); + /* * The Mellanox Tavor device gives false positive parity errors. Disable * parity error reporting. diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 4bac1831de80..17b2ab059176 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -151,6 +151,17 @@ /* Vendors and devices. Sort key: vendor first, device next. */ #define PCI_VENDOR_ID_LOONGSON 0x0014 +#define PCI_DEVICE_ID_LOONGSON_HOST 0x7a00 +#define PCI_DEVICE_ID_LOONGSON_APB 0x7a02 +#define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03 +#define PCI_DEVICE_ID_LOONGSON_DC 0x7a06 +#define PCI_DEVICE_ID_LOONGSON_HDA 0x7a07 +#define PCI_DEVICE_ID_LOONGSON_GPU 0x7a15 +#define PCI_DEVICE_ID_LOONGSON_AHCI 0x7a08 +#define PCI_DEVICE_ID_LOONGSON_EHCI 0x7a14 +#define PCI_DEVICE_ID_LOONGSON_OHCI 0x7a24 +#define PCI_DEVICE_ID_LOONGSON_LPC 0x7a0c +#define PCI_DEVICE_ID_LOONGSON_DMA 0x7a0f #define PCI_VENDOR_ID_TTTECH 0x0357 #define PCI_DEVICE_ID_TTTECH_MC322 0x000a