From patchwork Mon May 10 21:23:20 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Osipenko X-Patchwork-Id: 1476739 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20161025 header.b=ir8smZOp; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4FfDYw4Bw0z9sj1 for ; Tue, 11 May 2021 07:23:32 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229810AbhEJVYg (ORCPT ); Mon, 10 May 2021 17:24:36 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:44296 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231434AbhEJVYf (ORCPT ); Mon, 10 May 2021 17:24:35 -0400 Received: from mail-lf1-x12a.google.com (mail-lf1-x12a.google.com [IPv6:2a00:1450:4864:20::12a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5E1DAC061574; Mon, 10 May 2021 14:23:30 -0700 (PDT) Received: by mail-lf1-x12a.google.com with SMTP id z13so25543434lft.1; Mon, 10 May 2021 14:23:30 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=K2BeHmCvh+c4LgvO0p37BZhDNERKS5iR74FxOexrU2E=; b=ir8smZOpozdik85ufY+JqMFVbe4vnlMPt6qfTN1BaloKrU491FLrBib7kvDrCB1MRo 3d1oWkIJE0MgS6Ak93ELbVMvPUeaZ0+3BeGR8mLGEjtz6DxUrUeFz2w7E8izX0MRexsQ mkXkNc7MyjlSgTClBL1zdRJpYGFU1WAfoNfgtCqzdA28goJVFKPo05B3u3qUoUvvs4Ch svcxokCwHoZ0LRD6vujDNBIkrCCHAJyaupmoeY/uOYJIlYJBrglT0B82GCHlXqeA25/h C7y2fnqmfXG2vMkj7+DGiJlgoWKatfWrUIRYydhalSSrPQc57HFF9MB8osDNSotIJTvc kPDQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=K2BeHmCvh+c4LgvO0p37BZhDNERKS5iR74FxOexrU2E=; b=m534ppg/+zlDfMvkt5/yVCjO7bVOMqi3sQA2pCV8y4ZvtZzaw9CS232apbl7ZA4+Jf IWth26MQ+Lmn9T9x4SrJ20bjBX0Y2U2ufcdlLJyXjHlrdWQ6uKDOl8rtnmzPKdsijXrj 9ZFV8k++iHEXIwPh+qEvg7I9MGbvwQZsPtMq8DSfoMfqiQ5ab/YBbTvpSPpTCoFViFHE HGv3Uk4EaGkiG3un0O2fV/dU7HINqwIOcij2whkWaxuSenMDmcSichlATEnwEP5kxp36 wb02PYfPUVqa6zuxhREc42t286A+/HKaIeZ9740zPWWzOPjZkUEw3w0yNp3iqckk8MAK v9bA== X-Gm-Message-State: AOAM533u/86B42Kcpr9uaB4PR1kYsoa6yLn8wQRhdOkBJEqYR8AaOaPp ZUrD/Hdh6GbOrFf/v2qlhw0= X-Google-Smtp-Source: ABdhPJwSkMnVE2Vfvkw8u9w8MLlSIniHUWl3U16F6X6NfUBs7MuF2+n1Mn1HdR/h/VyL3O3Xcg+qyw== X-Received: by 2002:a19:5208:: with SMTP id m8mr18526887lfb.372.1620681808831; Mon, 10 May 2021 14:23:28 -0700 (PDT) Received: from localhost.localdomain (109-252-193-91.dynamic.spd-mgts.ru. [109.252.193.91]) by smtp.gmail.com with ESMTPSA id z139sm91876lfc.150.2021.05.10.14.23.28 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 10 May 2021 14:23:28 -0700 (PDT) From: Dmitry Osipenko To: Thierry Reding , Jonathan Hunter , Krzysztof Kozlowski , Rob Herring Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org Subject: [PATCH v4] dt-bindings: memory: tegra20: emc: Convert to schema Date: Tue, 11 May 2021 00:23:20 +0300 Message-Id: <20210510212320.3255-1-digetx@gmail.com> X-Mailer: git-send-email 2.30.2 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Convert Tegra20 External Memory Controller binding to schema. Signed-off-by: Dmitry Osipenko --- Changelog: v4: - Doesn't have duplicated properties by making use of $defs/$ref, which was suggested by Rob Herring in a review comment to v3. v3: - Fixed dt_binding_check warning about the missing reg property. - Became a standalone patch since other v2 patches were applied. .../memory-controllers/nvidia,tegra20-emc.txt | 130 ---------- .../nvidia,tegra20-emc.yaml | 230 ++++++++++++++++++ 2 files changed, 230 insertions(+), 130 deletions(-) delete mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt create mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt deleted file mode 100644 index d2250498c36d..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt +++ /dev/null @@ -1,130 +0,0 @@ -Embedded Memory Controller - -Properties: -- name : Should be emc -- #address-cells : Should be 1 -- #size-cells : Should be 0 -- compatible : Should contain "nvidia,tegra20-emc". -- reg : Offset and length of the register set for the device -- nvidia,use-ram-code : If present, the sub-nodes will be addressed - and chosen using the ramcode board selector. If omitted, only one - set of tables can be present and said tables will be used - irrespective of ram-code configuration. -- interrupts : Should contain EMC General interrupt. -- clocks : Should contain EMC clock. -- nvidia,memory-controller : Phandle of the Memory Controller node. -- #interconnect-cells : Should be 0. -- operating-points-v2: See ../bindings/opp/opp.txt for details. - -For each opp entry in 'operating-points-v2' table: -- opp-supported-hw: One bitfield indicating SoC process ID mask - - A bitwise AND is performed against this value and if any bit - matches, the OPP gets enabled. - -Optional properties: -- power-domains: Phandle of the SoC "core" power domain. - -Child device nodes describe the memory settings for different configurations and clock rates. - -Example: - - opp_table: opp-table { - compatible = "operating-points-v2"; - - opp@36000000 { - opp-microvolt = <950000 950000 1300000>; - opp-hz = /bits/ 64 <36000000>; - }; - ... - }; - - memory-controller@7000f400 { - #address-cells = < 1 >; - #size-cells = < 0 >; - #interconnect-cells = <0>; - compatible = "nvidia,tegra20-emc"; - reg = <0x7000f400 0x400>; - interrupts = <0 78 0x04>; - clocks = <&tegra_car TEGRA20_CLK_EMC>; - nvidia,memory-controller = <&mc>; - power-domains = <&domain>; - operating-points-v2 = <&opp_table>; - } - - -Embedded Memory Controller ram-code table - -If the emc node has the nvidia,use-ram-code property present, then the -next level of nodes below the emc table are used to specify which settings -apply for which ram-code settings. - -If the emc node lacks the nvidia,use-ram-code property, this level is omitted -and the tables are stored directly under the emc node (see below). - -Properties: - -- name : Should be emc-tables -- nvidia,ram-code : the binary representation of the ram-code board strappings - for which this node (and children) are valid. - - - -Embedded Memory Controller configuration table - -This is a table containing the EMC register settings for the various -operating speeds of the memory controller. They are always located as -subnodes of the emc controller node. - -There are two ways of specifying which tables to use: - -* The simplest is if there is just one set of tables in the device tree, - and they will always be used (based on which frequency is used). - This is the preferred method, especially when firmware can fill in - this information based on the specific system information and just - pass it on to the kernel. - -* The slightly more complex one is when more than one memory configuration - might exist on the system. The Tegra20 platform handles this during - early boot by selecting one out of possible 4 memory settings based - on a 2-pin "ram code" bootstrap setting on the board. The values of - these strappings can be read through a register in the SoC, and thus - used to select which tables to use. - -Properties: -- name : Should be emc-table -- compatible : Should contain "nvidia,tegra20-emc-table". -- reg : either an opaque enumerator to tell different tables apart, or - the valid frequency for which the table should be used (in kHz). -- clock-frequency : the clock frequency for the EMC at which this - table should be used (in kHz). -- nvidia,emc-registers : a 46 word array of EMC registers to be programmed - for operation at the 'clock-frequency' setting. - The order and contents of the registers are: - RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT, - WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR, - PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW, - TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE, - ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE, - ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0, - CFG_CLKTRIM_1, CFG_CLKTRIM_2 - - emc-table@166000 { - reg = <166000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 166000 >; - nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 >; - }; - - emc-table@333000 { - reg = <333000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 333000 >; - nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 >; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml new file mode 100644 index 000000000000..cac6842dc8f1 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml @@ -0,0 +1,230 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra20-emc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 SoC External Memory Controller + +maintainers: + - Dmitry Osipenko + - Jon Hunter + - Thierry Reding + +description: | + The External Memory Controller (EMC) interfaces with the off-chip SDRAM to + service the request stream sent from Memory Controller. The EMC also has + various performance-affecting settings beyond the obvious SDRAM configuration + parameters and initialization settings. Tegra20 EMC supports multiple JEDEC + standard protocols: DDR1, LPDDR2 and DDR2. + +properties: + compatible: + const: nvidia,tegra20-emc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#interconnect-cells": + const: 0 + + nvidia,memory-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle of the Memory Controller node. + + power-domains: + maxItems: 1 + description: + Phandle of the SoC "core" power domain. + + operating-points-v2: + description: + Should contain freqs and voltages and opp-supported-hw property, which + is a bitfield indicating SoC process ID mask. + + nvidia,use-ram-code: + type: boolean + description: + If present, the emc-tables@ sub-nodes will be addressed. + +$defs: + emc-table: + type: object + properties: + compatible: + const: nvidia,tegra20-emc-table + + clock-frequency: + description: + Memory clock rate in kHz. + minimum: 1000 + maximum: 900000 + + reg: + maxItems: 1 + description: + Either an opaque enumerator to tell different tables apart, or + the valid frequency for which the table should be used (in kHz). + + nvidia,emc-registers: + description: + EMC timing characterization data. These are the registers + (see section "15.4.1 EMC Registers" in the TRM) whose values + need to be specified, according to the board documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: EMC_RC + - description: EMC_RFC + - description: EMC_RAS + - description: EMC_RP + - description: EMC_R2W + - description: EMC_W2R + - description: EMC_R2P + - description: EMC_W2P + - description: EMC_RD_RCD + - description: EMC_WR_RCD + - description: EMC_RRD + - description: EMC_REXT + - description: EMC_WDV + - description: EMC_QUSE + - description: EMC_QRST + - description: EMC_QSAFE + - description: EMC_RDV + - description: EMC_REFRESH + - description: EMC_BURST_REFRESH_NUM + - description: EMC_PDEX2WR + - description: EMC_PDEX2RD + - description: EMC_PCHG2PDEN + - description: EMC_ACT2PDEN + - description: EMC_AR2PDEN + - description: EMC_RW2PDEN + - description: EMC_TXSR + - description: EMC_TCKE + - description: EMC_TFAW + - description: EMC_TRPAB + - description: EMC_TCLKSTABLE + - description: EMC_TCLKSTOP + - description: EMC_TREFBW + - description: EMC_QUSE_EXTRA + - description: EMC_FBIO_CFG6 + - description: EMC_ODT_WRITE + - description: EMC_ODT_READ + - description: EMC_FBIO_CFG5 + - description: EMC_CFG_DIG_DLL + - description: EMC_DLL_XFORM_DQS + - description: EMC_DLL_XFORM_QUSE + - description: EMC_ZCAL_REF_CNT + - description: EMC_ZCAL_WAIT_CNT + - description: EMC_AUTO_CAL_INTERVAL + - description: EMC_CFG_CLKTRIM_0 + - description: EMC_CFG_CLKTRIM_1 + - description: EMC_CFG_CLKTRIM_2 + + required: + - clock-frequency + - compatible + - reg + - nvidia,emc-registers + + additionalProperties: false + +patternProperties: + "^emc-table@[0-9]+$": + $ref: "#/$defs/emc-table" + + "^emc-tables@[a-z0-9-]+$": + type: object + properties: + reg: + maxItems: 1 + description: + An opaque enumerator to tell different tables apart. + + nvidia,ram-code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Value of RAM_CODE this timing set is used for. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^emc-table@[0-9]+$": + $ref: "#/$defs/emc-table" + + required: + - nvidia,ram-code + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - nvidia,memory-controller + - "#interconnect-cells" + - operating-points-v2 + +additionalProperties: false + +examples: + - | + external-memory-controller@7000f400 { + compatible = "nvidia,tegra20-emc"; + reg = <0x7000f400 0x400>; + interrupts = <0 78 4>; + clocks = <&clock_controller 57>; + + nvidia,memory-controller = <&mc>; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>; + + #interconnect-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + nvidia,use-ram-code; + + emc-tables@0 { + nvidia,ram-code = <0>; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + emc-table@333000 { + reg = <333000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <333000>; + nvidia,emc-registers = <0x00000018 0x00000033 + 0x00000012 0x00000004 0x00000004 0x00000005 + 0x00000003 0x0000000c 0x00000006 0x00000006 + 0x00000003 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x00000bff + 0x00000000 0x00000003 0x00000003 0x00000006 + 0x00000006 0x00000001 0x00000011 0x000000c8 + 0x00000003 0x0000000e 0x00000007 0x00000008 + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xf0440303 + 0x007fe010 0x00001414 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + }; + };