From patchwork Tue Mar 30 08:08:21 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hongxing Zhu X-Patchwork-Id: 1459933 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4F8jBZ5Y5Cz9sWX for ; Tue, 30 Mar 2021 19:23:18 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231359AbhC3IWn (ORCPT ); Tue, 30 Mar 2021 04:22:43 -0400 Received: from inva021.nxp.com ([92.121.34.21]:39980 "EHLO inva021.nxp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231318AbhC3IW3 (ORCPT ); Tue, 30 Mar 2021 04:22:29 -0400 Received: from inva021.nxp.com (localhost [127.0.0.1]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id F319C202FF4; Tue, 30 Mar 2021 10:22:27 +0200 (CEST) Received: from invc005.ap-rdc01.nxp.com (invc005.ap-rdc01.nxp.com [165.114.16.14]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id AE85520132C; Tue, 30 Mar 2021 10:22:22 +0200 (CEST) Received: from localhost.localdomain (shlinux2.ap.freescale.net [10.192.224.44]) by invc005.ap-rdc01.nxp.com (Postfix) with ESMTP id D7E07402F0; Tue, 30 Mar 2021 10:22:15 +0200 (CEST) From: Richard Zhu To: l.stach@pengutronix.de, andrew.smirnov@gmail.com, shawnguo@kernel.org, kw@linux.com, bhelgaas@google.com, stefan@agner.ch, lorenzo.pieralisi@arm.com Cc: linux-pci@vger.kernel.org, linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@pengutronix.de, Richard Zhu Subject: [RESEND v4 2/2] PCI: imx: clear vreg bypass when pcie vph voltage is 3v3 Date: Tue, 30 Mar 2021 16:08:21 +0800 Message-Id: <1617091701-6444-3-git-send-email-hongxing.zhu@nxp.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1617091701-6444-1-git-send-email-hongxing.zhu@nxp.com> References: <1617091701-6444-1-git-send-email-hongxing.zhu@nxp.com> X-Virus-Scanned: ClamAV using ClamSMTP Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Both 1.8v and 3.3v power supplies can be used by i.MX8MQ PCIe PHY. In default, the PCIE_VPH voltage is suggested to be 1.8v refer to data sheet. When PCIE_VPH is supplied by 3.3v in the HW schematic design, the VREG_BYPASS bits of GPR registers should be cleared from default value 1b'1 to 1b'0. Thus, the internal 3v3 to 1v8 translator would be turned on. Signed-off-by: Richard Zhu Reviewed-by: Lucas Stach --- drivers/pci/controller/dwc/pci-imx6.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 853ea8e82952..94b43b4ecca1 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -37,6 +37,7 @@ #define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9) #define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10) #define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11) +#define IMX8MQ_GPR_PCIE_VREG_BYPASS BIT(12) #define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8) #define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000 @@ -80,6 +81,7 @@ struct imx6_pcie { u32 tx_swing_full; u32 tx_swing_low; struct regulator *vpcie; + struct regulator *vph; void __iomem *phy_base; /* power domain for pcie */ @@ -621,6 +623,17 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) imx6_pcie_grp_offset(imx6_pcie), IMX8MQ_GPR_PCIE_REF_USE_PAD, IMX8MQ_GPR_PCIE_REF_USE_PAD); + /* + * Regarding the datasheet, the PCIE_VPH is suggested + * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the + * VREG_BYPASS should be cleared to zero. + */ + if (imx6_pcie->vph && + regulator_get_voltage(imx6_pcie->vph) > 3000000) + regmap_update_bits(imx6_pcie->iomuxc_gpr, + imx6_pcie_grp_offset(imx6_pcie), + IMX8MQ_GPR_PCIE_VREG_BYPASS, + 0); break; case IMX7D: regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, @@ -1130,6 +1143,13 @@ static int imx6_pcie_probe(struct platform_device *pdev) imx6_pcie->vpcie = NULL; } + imx6_pcie->vph = devm_regulator_get_optional(&pdev->dev, "vph"); + if (IS_ERR(imx6_pcie->vph)) { + if (PTR_ERR(imx6_pcie->vph) != -ENODEV) + return PTR_ERR(imx6_pcie->vph); + imx6_pcie->vph = NULL; + } + platform_set_drvdata(pdev, imx6_pcie); ret = imx6_pcie_attach_pd(dev);