From patchwork Sun Jan 10 19:29:37 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?q?Jernej_=C5=A0krabec?= X-Patchwork-Id: 1424298 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=siol.net Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4DDRkR2SN5z9sW4 for ; Mon, 11 Jan 2021 06:30:03 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 23DC5829ED; Sun, 10 Jan 2021 20:29:52 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=fail (p=none dis=none) header.from=siol.net Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id 2B2D1829EC; Sun, 10 Jan 2021 20:29:50 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.6 required=5.0 tests=BAYES_00,RCVD_IN_DNSWL_LOW, SPF_HELO_NONE autolearn=ham autolearn_force=no version=3.4.2 Received: from mail.siol.net (mailoutvs20.siol.net [185.57.226.211]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id B8A40829E0 for ; Sun, 10 Jan 2021 20:29:46 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=siol.net Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=jernej.skrabec@siol.net Received: from localhost (localhost [127.0.0.1]) by mail.siol.net (Postfix) with ESMTP id 5EDD2521782; Sun, 10 Jan 2021 20:29:46 +0100 (CET) Received: from mail.siol.net ([127.0.0.1]) by localhost (psrvmta11.zcs-production.pri [127.0.0.1]) (amavisd-new, port 10032) with ESMTP id K1SUFxLtvlqf; Sun, 10 Jan 2021 20:29:46 +0100 (CET) Received: from mail.siol.net (localhost [127.0.0.1]) by mail.siol.net (Postfix) with ESMTPS id 0442A521780; Sun, 10 Jan 2021 20:29:46 +0100 (CET) Received: from kista.localdomain (cpe-86-58-58-53.static.triera.net [86.58.58.53]) (Authenticated sender: 031275009) by mail.siol.net (Postfix) with ESMTPSA id 76289521782; Sun, 10 Jan 2021 20:29:43 +0100 (CET) From: Jernej Skrabec To: jagan@amarulasolutions.com, andre.przywara@arm.com Cc: hdegoede@redhat.com, jernej.skrabec@siol.net, u-boot@lists.denx.de, linux-sunxi@googlegroups.com, Andre Heider , Maxime Ripard Subject: [PATCH v6 1/3] sunxi: board: extract creating a unique sid into a helper function Date: Sun, 10 Jan 2021 20:29:37 +0100 Message-Id: <20210110192939.3138193-2-jernej.skrabec@siol.net> X-Mailer: git-send-email 2.30.0 In-Reply-To: <20210110192939.3138193-1-jernej.skrabec@siol.net> References: <20210110192939.3138193-1-jernej.skrabec@siol.net> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.34 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.102.3 at phobos.denx.de X-Virus-Status: Clean From: Andre Heider Refactor setup_environment() so we can use the created sid for a Bluetooth address too. Acked-by: Maxime Ripard Reviewed-by: Andre Przywara Signed-off-by: Andre Heider [rebased] Signed-off-by: Jernej Skrabec --- board/sunxi/board.c | 121 ++++++++++++++++++++++++-------------------- 1 file changed, 66 insertions(+), 55 deletions(-) diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 708a27ed78e9..4a29e351141b 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -789,6 +789,38 @@ static void parse_spl_header(const uint32_t spl_addr) env_set_hex("fel_scriptaddr", spl->fel_script_address); } +static bool get_unique_sid(unsigned int *sid) +{ + if (sunxi_get_sid(sid) != 0) + return false; + + if (!sid[0]) + return false; + + /* + * The single words 1 - 3 of the SID have quite a few bits + * which are the same on many models, so we take a crc32 + * of all 3 words, to get a more unique value. + * + * Note we only do this on newer SoCs as we cannot change + * the algorithm on older SoCs since those have been using + * fixed mac-addresses based on only using word 3 for a + * long time and changing a fixed mac-address with an + * u-boot update is not good. + */ +#if !defined(CONFIG_MACH_SUN4I) && !defined(CONFIG_MACH_SUN5I) && \ + !defined(CONFIG_MACH_SUN6I) && !defined(CONFIG_MACH_SUN7I) && \ + !defined(CONFIG_MACH_SUN8I_A23) && !defined(CONFIG_MACH_SUN8I_A33) + sid[3] = crc32(0, (unsigned char *)&sid[1], 12); +#endif + + /* Ensure the NIC specific bytes of the mac are not all 0 */ + if ((sid[3] & 0xffffff) == 0) + sid[3] |= 0x800000; + + return true; +} + /* * Note this function gets called multiple times. * It must not make any changes to env variables which already exist. @@ -799,61 +831,40 @@ static void setup_environment(const void *fdt) unsigned int sid[4]; uint8_t mac_addr[6]; char ethaddr[16]; - int i, ret; - - ret = sunxi_get_sid(sid); - if (ret == 0 && sid[0] != 0) { - /* - * The single words 1 - 3 of the SID have quite a few bits - * which are the same on many models, so we take a crc32 - * of all 3 words, to get a more unique value. - * - * Note we only do this on newer SoCs as we cannot change - * the algorithm on older SoCs since those have been using - * fixed mac-addresses based on only using word 3 for a - * long time and changing a fixed mac-address with an - * u-boot update is not good. - */ -#if !defined(CONFIG_MACH_SUN4I) && !defined(CONFIG_MACH_SUN5I) && \ - !defined(CONFIG_MACH_SUN6I) && !defined(CONFIG_MACH_SUN7I) && \ - !defined(CONFIG_MACH_SUN8I_A23) && !defined(CONFIG_MACH_SUN8I_A33) - sid[3] = crc32(0, (unsigned char *)&sid[1], 12); -#endif - - /* Ensure the NIC specific bytes of the mac are not all 0 */ - if ((sid[3] & 0xffffff) == 0) - sid[3] |= 0x800000; - - for (i = 0; i < 4; i++) { - sprintf(ethaddr, "ethernet%d", i); - if (!fdt_get_alias(fdt, ethaddr)) - continue; - - if (i == 0) - strcpy(ethaddr, "ethaddr"); - else - sprintf(ethaddr, "eth%daddr", i); - - if (env_get(ethaddr)) - continue; - - /* Non OUI / registered MAC address */ - mac_addr[0] = (i << 4) | 0x02; - mac_addr[1] = (sid[0] >> 0) & 0xff; - mac_addr[2] = (sid[3] >> 24) & 0xff; - mac_addr[3] = (sid[3] >> 16) & 0xff; - mac_addr[4] = (sid[3] >> 8) & 0xff; - mac_addr[5] = (sid[3] >> 0) & 0xff; - - eth_env_set_enetaddr(ethaddr, mac_addr); - } - - if (!env_get("serial#")) { - snprintf(serial_string, sizeof(serial_string), - "%08x%08x", sid[0], sid[3]); - - env_set("serial#", serial_string); - } + int i; + + if (!get_unique_sid(sid)) + return; + + for (i = 0; i < 4; i++) { + sprintf(ethaddr, "ethernet%d", i); + if (!fdt_get_alias(fdt, ethaddr)) + continue; + + if (i == 0) + strcpy(ethaddr, "ethaddr"); + else + sprintf(ethaddr, "eth%daddr", i); + + if (env_get(ethaddr)) + continue; + + /* Non OUI / registered MAC address */ + mac_addr[0] = (i << 4) | 0x02; + mac_addr[1] = (sid[0] >> 0) & 0xff; + mac_addr[2] = (sid[3] >> 24) & 0xff; + mac_addr[3] = (sid[3] >> 16) & 0xff; + mac_addr[4] = (sid[3] >> 8) & 0xff; + mac_addr[5] = (sid[3] >> 0) & 0xff; + + eth_env_set_enetaddr(ethaddr, mac_addr); + } + + if (!env_get("serial#")) { + snprintf(serial_string, sizeof(serial_string), + "%08x%08x", sid[0], sid[3]); + + env_set("serial#", serial_string); } } From patchwork Sun Jan 10 19:29:38 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?q?Jernej_=C5=A0krabec?= X-Patchwork-Id: 1424300 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=siol.net Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4DDRkc1vpCz9sW4 for ; Mon, 11 Jan 2021 06:30:16 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 5376B829F3; Sun, 10 Jan 2021 20:29:54 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=fail (p=none dis=none) header.from=siol.net Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id B70D2829EE; Sun, 10 Jan 2021 20:29:52 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.6 required=5.0 tests=BAYES_00,RCVD_IN_DNSWL_LOW, SPF_HELO_NONE autolearn=ham autolearn_force=no version=3.4.2 Received: from mail.siol.net (mailoutvs23.siol.net [185.57.226.214]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 10DB9829E8 for ; Sun, 10 Jan 2021 20:29:49 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=siol.net Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=jernej.skrabec@siol.net Received: from localhost (localhost [127.0.0.1]) by mail.siol.net (Postfix) with ESMTP id A6BA0521780; Sun, 10 Jan 2021 20:29:48 +0100 (CET) Received: from mail.siol.net ([127.0.0.1]) by localhost (psrvmta11.zcs-production.pri [127.0.0.1]) (amavisd-new, port 10032) with ESMTP id l8d6cXsO688C; Sun, 10 Jan 2021 20:29:48 +0100 (CET) Received: from mail.siol.net (localhost [127.0.0.1]) by mail.siol.net (Postfix) with ESMTPS id 5D2B8521772; Sun, 10 Jan 2021 20:29:48 +0100 (CET) Received: from kista.localdomain (cpe-86-58-58-53.static.triera.net [86.58.58.53]) (Authenticated sender: 031275009) by mail.siol.net (Postfix) with ESMTPSA id 0A4C052178C; Sun, 10 Jan 2021 20:29:46 +0100 (CET) From: Jernej Skrabec To: jagan@amarulasolutions.com, andre.przywara@arm.com Cc: hdegoede@redhat.com, jernej.skrabec@siol.net, u-boot@lists.denx.de, linux-sunxi@googlegroups.com, Andre Heider , Ondrej Jirman , Maxime Ripard Subject: [PATCH v6 2/3] arm: sunxi: add a config option to fixup a Bluetooth address Date: Sun, 10 Jan 2021 20:29:38 +0100 Message-Id: <20210110192939.3138193-3-jernej.skrabec@siol.net> X-Mailer: git-send-email 2.30.0 In-Reply-To: <20210110192939.3138193-1-jernej.skrabec@siol.net> References: <20210110192939.3138193-1-jernej.skrabec@siol.net> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.34 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.102.3 at phobos.denx.de X-Virus-Status: Clean From: Andre Heider Some Bluetooth controllers, like the BCM4345C5 of the Orange Pi 3, ship with the controller default address. Add a config option to fix it up so it can function properly. Signed-off-by: Andre Heider Tested-by: Ondrej Jirman Acked-by: Maxime Ripard [rebased] Signed-off-by: Jernej Skrabec --- arch/arm/mach-sunxi/Kconfig | 11 +++++++++++ board/sunxi/board.c | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 45 insertions(+) diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 49ef217f08c0..11e644519271 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1016,4 +1016,15 @@ config PINEPHONE_DT_SELECTION Enable this option to automatically select the device tree for the correct PinePhone hardware revision during boot. +config BLUETOOTH_DT_DEVICE_FIXUP + string "Fixup the Bluetooth controller address" + default "" + help + This option specifies the DT compatible name of the Bluetooth + controller for which to set the "local-bd-address" property. + Set this option if your device ships with the Bluetooth controller + default address. + The used address is "bdaddr" if set, and "ethaddr" with the LSB + flipped elsewise. + endif diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 4a29e351141b..ed658fced3c7 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -908,6 +908,38 @@ int misc_init_r(void) return 0; } +static void bluetooth_dt_fixup(void *blob) +{ + /* Some devices ship with a Bluetooth controller default address. + * Set a valid address through the device tree. + */ + uchar tmp[ETH_ALEN], bdaddr[ETH_ALEN]; + unsigned int sid[4]; + int i; + + if (!CONFIG_BLUETOOTH_DT_DEVICE_FIXUP[0]) + return; + + if (eth_env_get_enetaddr("bdaddr", tmp)) { + /* Convert between the binary formats of the corresponding stacks */ + for (i = 0; i < ETH_ALEN; ++i) + bdaddr[i] = tmp[ETH_ALEN - i - 1]; + } else { + if (!get_unique_sid(sid)) + return; + + bdaddr[0] = ((sid[3] >> 0) & 0xff) ^ 1; + bdaddr[1] = (sid[3] >> 8) & 0xff; + bdaddr[2] = (sid[3] >> 16) & 0xff; + bdaddr[3] = (sid[3] >> 24) & 0xff; + bdaddr[4] = (sid[0] >> 0) & 0xff; + bdaddr[5] = 0x02; + } + + do_fixup_by_compat(blob, CONFIG_BLUETOOTH_DT_DEVICE_FIXUP, + "local-bd-address", bdaddr, ETH_ALEN, 1); +} + int ft_board_setup(void *blob, struct bd_info *bd) { int __maybe_unused r; @@ -918,6 +950,8 @@ int ft_board_setup(void *blob, struct bd_info *bd) */ setup_environment(blob); + bluetooth_dt_fixup(blob); + #ifdef CONFIG_VIDEO_DT_SIMPLEFB r = sunxi_simplefb_setup(blob); if (r) From patchwork Sun Jan 10 19:29:39 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Jernej_=C5=A0krabec?= X-Patchwork-Id: 1424301 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=siol.net Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4DDRkn27Bzz9sWC for ; Mon, 11 Jan 2021 06:30:25 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 877C4829EA; Sun, 10 Jan 2021 20:29:57 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=fail (p=none dis=none) header.from=siol.net Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id 6DF7B829F7; Sun, 10 Jan 2021 20:29:55 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.6 required=5.0 tests=BAYES_00,RCVD_IN_DNSWL_LOW, SPF_HELO_NONE autolearn=ham autolearn_force=no version=3.4.2 Received: from mail.siol.net (mailoutvs39.siol.net [185.57.226.230]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 851A4829E0 for ; Sun, 10 Jan 2021 20:29:51 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=siol.net Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=jernej.skrabec@siol.net Received: from localhost (localhost [127.0.0.1]) by mail.siol.net (Postfix) with ESMTP id 3A364520C97; Sun, 10 Jan 2021 20:29:51 +0100 (CET) Received: from mail.siol.net ([127.0.0.1]) by localhost (psrvmta11.zcs-production.pri [127.0.0.1]) (amavisd-new, port 10032) with ESMTP id 4wd4fYAv1iLD; Sun, 10 Jan 2021 20:29:50 +0100 (CET) Received: from mail.siol.net (localhost [127.0.0.1]) by mail.siol.net (Postfix) with ESMTPS id A4819521782; Sun, 10 Jan 2021 20:29:50 +0100 (CET) Received: from kista.localdomain (cpe-86-58-58-53.static.triera.net [86.58.58.53]) (Authenticated sender: 031275009) by mail.siol.net (Postfix) with ESMTPSA id 6351F521777; Sun, 10 Jan 2021 20:29:48 +0100 (CET) From: Jernej Skrabec To: jagan@amarulasolutions.com, andre.przywara@arm.com Cc: hdegoede@redhat.com, jernej.skrabec@siol.net, u-boot@lists.denx.de, linux-sunxi@googlegroups.com, Andre Heider , Maxime Ripard Subject: [PATCH v6 3/3] arm64: dts: sun50i: Add support for Orange Pi 3 Date: Sun, 10 Jan 2021 20:29:39 +0100 Message-Id: <20210110192939.3138193-4-jernej.skrabec@siol.net> X-Mailer: git-send-email 2.30.0 In-Reply-To: <20210110192939.3138193-1-jernej.skrabec@siol.net> References: <20210110192939.3138193-1-jernej.skrabec@siol.net> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.34 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.102.3 at phobos.denx.de X-Virus-Status: Clean From: Andre Heider dts file is taken from Linux 5.11-rc1 tag. The Bluetooth controller of this device ships with a default address, use the new CONFIG_FIXUP_BDADDR option to fix it up. akonadi:?collection=30&name=INBOX Acked-by: Maxime Ripard Signed-off-by: Andre Heider [Updated OrangePi 3 DT, rebase and config update] Signed-off-by: Jernej Skrabec --- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-h6-orangepi-3.dts | 345 ++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 5 + configs/orangepi_3_defconfig | 12 + 4 files changed, 363 insertions(+) create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3.dts create mode 100644 configs/orangepi_3_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e00aed1ec207..607571d04b25 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -605,6 +605,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \ sun50i-h5-orangepi-zero-plus2.dtb dtb-$(CONFIG_MACH_SUN50I_H6) += \ sun50i-h6-beelink-gs1.dtb \ + sun50i-h6-orangepi-3.dtb \ sun50i-h6-orangepi-lite2.dtb \ sun50i-h6-orangepi-one-plus.dtb \ sun50i-h6-pine-h64.dtb \ diff --git a/arch/arm/dts/sun50i-h6-orangepi-3.dts b/arch/arm/dts/sun50i-h6-orangepi-3.dts new file mode 100644 index 000000000000..15c9dd8c4479 --- /dev/null +++ b/arch/arm/dts/sun50i-h6-orangepi-3.dts @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 OndÅ™ej Jirman + +/dts-v1/; + +#include "sun50i-h6.dtsi" +#include "sun50i-h6-cpu-opp.dtsi" + +#include + +/ { + model = "OrangePi 3"; + compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + ext_osc32k: ext_osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "orangepi:red:power"; + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + default-state = "on"; + }; + + status { + label = "orangepi:green:status"; + gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC jack */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_vcc33_wifi: vcc33-wifi { + /* Always on 3.3V regulator for WiFi and BT */ + compatible = "regulator-fixed"; + regulator-name = "vcc33-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vcc5v>; + }; + + reg_vcc_wifi_io: vcc-wifi-io { + /* Always on 1.8V/300mA regulator for WiFi and BT IO */ + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <®_vcc33_wifi>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ + post-power-on-delay-ms = <200>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdca>; +}; + +&de { + status = "okay"; +}; + +&dwc3 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc33_wifi>; + vqmmc-supply = <®_vcc_wifi_io>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcm: sdio-wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + vmmc-supply = <®_cldo1>; + vqmmc-supply = <®_bldo2>; + cap-mmc-hw-reset; + non-removable; + bus-width = <8>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&pio { + vcc-pc-supply = <®_bldo2>; + vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_vcc_wifi_io>; +}; + +&r_i2c { + status = "okay"; + + axp805: pmic@36 { + compatible = "x-powers,axp805", "x-powers,axp806"; + reg = <0x36>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + x-powers,self-working-mode; + vina-supply = <®_vcc5v>; + vinb-supply = <®_vcc5v>; + vinc-supply = <®_vcc5v>; + vind-supply = <®_vcc5v>; + vine-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl-led-ir"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33-audio-tv-ephy-mac"; + }; + + /* ALDO3 is shorted to CLDO1 */ + reg_aldo3: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18-dram-bias-pll"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse-pcie-hdmi-pc"; + }; + + bldo3 { + /* unused */ + }; + + bldo4 { + /* unused */ + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2"; + }; + + cldo2 { + /* unused */ + }; + + cldo3 { + /* unused */ + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1160000>; + regulator-ramp-delay = <2500>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-ramp-delay = <2500>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <960000>; + regulator-name = "vdd-sys"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&r_ir { + status = "okay"; +}; + +&rtc { + clocks = <&ext_osc32k>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +/* There's the BT part of the AP6256 connected to that UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rtc 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ + shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + max-speed = <1500000>; + }; +}; + +&usb2otg { + /* + * This board doesn't have a controllable VBUS even though it + * does have an ID pin. Using it as anything but a USB host is + * unsafe. + */ + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy { + usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */ + usb0_vbus-supply = <®_vcc5v>; + usb3_vbus-supply = <®_vcc5v>; + status = "okay"; +}; + +&usb3phy { + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 1b37a9899edd..95b4df83e0a9 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -385,6 +385,11 @@ M: Icenowy Zheng S: Maintained F: configs/teres_i_defconfig +ORANGEPI 3 BOARD +M: Andre Heider +S: Maintained +F: configs/orangepi_3_defconfig + ORANGEPI LITE2 BOARD M: Jagan Teki S: Maintained diff --git a/configs/orangepi_3_defconfig b/configs/orangepi_3_defconfig new file mode 100644 index 000000000000..82b9815205ef --- /dev/null +++ b/configs/orangepi_3_defconfig @@ -0,0 +1,12 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN50I_H6=y +CONFIG_SUNXI_DRAM_H6_LPDDR3=y +CONFIG_MMC0_CD_PIN="PF6" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_BLUETOOTH_DT_DEVICE_FIXUP="brcm,bcm4345c5" +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-3" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y