Message ID | 20101021143850.GA18759@evatp |
---|---|
State | Accepted |
Delegated to: | Brad Figg |
Headers | show |
On 10/21/2010 08:38 AM, Ricardo Salveti de Araujo wrote: > SRU Justification: > > Impact: With BeagleBoard xM rev A3 the DVI_PU is now used and connected to GPIO > 2 on TPS65950. Without setting up this GPIO the DVI will be off, and the user > will be unable to install and use the distro. > > Fix: The problem is fixed by setting up the GPIO 2 on TPS65950 for when running > at Beagle xM. There's no problem when setting this GPIO in previous xM revisions > as it's not connected. For more details please see > http://beagleboard.org/hardware/design. > > Testcase: When booting with current kernel on xM A3 you should be unable to use > the DVI. After applying the fix it should work the same way as with previous xM revisions. > > BugLink: https://bugs.launchpad.net/bugs/663642 > > From: Robert Nelson<robertcnelson@gmail.com> > Date: Mon, 18 Oct 2010 15:02:35 -0500 > Subject: [PATCH] UBUNTU: SAUCE: OMAP3: beagle: use GPIO2 on the xM A3 to turn DVI on > > With BeagleBoard xM rev A3 the DVI_PU is now used and connected to GPIO > 2 on TPS65950. This patch enable the correct GPIO pin in order to have a > working DVI again. > > This patch is not yet upstream because it depends on the xM check > patches that are still not upstream. > > BugLink: https://bugs.launchpad.net/bugs/663642 > > Signed-off-by: Robert Nelson<robertcnelson@gmail.com> > Signed-off-by: Ricardo Salveti de Araujo<ricardo.salveti@canonical.com> > --- > arch/arm/mach-omap2/board-omap3beagle.c | 4 ++++ > 1 files changed, 4 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c > index 94cb19c..81b19e3 100644 > --- a/arch/arm/mach-omap2/board-omap3beagle.c > +++ b/arch/arm/mach-omap2/board-omap3beagle.c > @@ -306,6 +306,10 @@ static int beagle_twl_gpio_setup(struct device *dev, > if (cpu_is_omap3630()) { > gpio_request(gpio + 1, "nDVI_PWR_EN"); > gpio_direction_output(gpio + 1, 0); > + > + /* On the xM A3 DVI_PUP was moved to an empty GPIO pin on the TPS65950 */ > + gpio_request(gpio + 2, "DVI_PUP"); > + gpio_direction_output(gpio + 2, 1); > > /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ > gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); Acked-by: Tim Gardner <tim.gardner@canonical.com>
On Thu, 2010-10-21 at 12:38 -0200, Ricardo Salveti de Araujo wrote: > SRU Justification: > > Impact: With BeagleBoard xM rev A3 the DVI_PU is now used and connected to GPIO > 2 on TPS65950. Without setting up this GPIO the DVI will be off, and the user > will be unable to install and use the distro. > > Fix: The problem is fixed by setting up the GPIO 2 on TPS65950 for when running > at Beagle xM. There's no problem when setting this GPIO in previous xM revisions > as it's not connected. For more details please see > http://beagleboard.org/hardware/design. > > Testcase: When booting with current kernel on xM A3 you should be unable to use > the DVI. After applying the fix it should work the same way as with previous xM revisions. > > BugLink: https://bugs.launchpad.net/bugs/663642 > > From: Robert Nelson <robertcnelson@gmail.com> > Date: Mon, 18 Oct 2010 15:02:35 -0500 > Subject: [PATCH] UBUNTU: SAUCE: OMAP3: beagle: use GPIO2 on the xM A3 to turn DVI on > > With BeagleBoard xM rev A3 the DVI_PU is now used and connected to GPIO > 2 on TPS65950. This patch enable the correct GPIO pin in order to have a > working DVI again. > > This patch is not yet upstream because it depends on the xM check > patches that are still not upstream. > > BugLink: https://bugs.launchpad.net/bugs/663642 > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com> > --- > arch/arm/mach-omap2/board-omap3beagle.c | 4 ++++ > 1 files changed, 4 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c > index 94cb19c..81b19e3 100644 > --- a/arch/arm/mach-omap2/board-omap3beagle.c > +++ b/arch/arm/mach-omap2/board-omap3beagle.c > @@ -306,6 +306,10 @@ static int beagle_twl_gpio_setup(struct device *dev, > if (cpu_is_omap3630()) { > gpio_request(gpio + 1, "nDVI_PWR_EN"); > gpio_direction_output(gpio + 1, 0); > + > + /* On the xM A3 DVI_PUP was moved to an empty GPIO pin on the TPS65950 */ > + gpio_request(gpio + 2, "DVI_PUP"); > + gpio_direction_output(gpio + 2, 1); > > /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ > gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); > -- > 1.7.1 Per comments in the bug report, the patch has been tested and confirmed to resolve the issue. Acked-by: Leann Ogasawara <leann.ogasawara@canonical.com>
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 94cb19c..81b19e3 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -306,6 +306,10 @@ static int beagle_twl_gpio_setup(struct device *dev, if (cpu_is_omap3630()) { gpio_request(gpio + 1, "nDVI_PWR_EN"); gpio_direction_output(gpio + 1, 0); + + /* On the xM A3 DVI_PUP was moved to an empty GPIO pin on the TPS65950 */ + gpio_request(gpio + 2, "DVI_PUP"); + gpio_direction_output(gpio + 2, 1); /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");