From patchwork Wed Oct 23 18:22:00 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Robert Beckett X-Patchwork-Id: 1182404 X-Patchwork-Delegate: sbabic@denx.de Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=lists.denx.de (client-ip=81.169.180.215; helo=lists.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=collabora.com Received: from lists.denx.de (dione.denx.de [81.169.180.215]) by ozlabs.org (Postfix) with ESMTP id 46yzgg5nccz9sNw for ; Thu, 24 Oct 2019 05:39:43 +1100 (AEDT) Received: by lists.denx.de (Postfix, from userid 105) id 870E0C21E63; Wed, 23 Oct 2019 18:34:09 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on lists.denx.de X-Spam-Level: X-Spam-Status: No, score=0.0 required=5.0 tests=SPF_HELO_PASS, UNPARSEABLE_RELAY autolearn=unavailable autolearn_force=no version=3.4.0 Received: from lists.denx.de (localhost [IPv6:::1]) by lists.denx.de (Postfix) with ESMTP id 394D4C21F24; Wed, 23 Oct 2019 18:23:42 +0000 (UTC) Received: by lists.denx.de (Postfix, from userid 105) id D2960C21F41; Wed, 23 Oct 2019 18:23:06 +0000 (UTC) Received: from bhuna.collabora.co.uk (bhuna.collabora.co.uk [46.235.227.227]) by lists.denx.de (Postfix) with ESMTPS id B2F53C21E38 for ; Wed, 23 Oct 2019 18:22:56 +0000 (UTC) Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: bbeckett) with ESMTPSA id 31C1228F8A0 From: Robert Beckett To: U-Boot Mailing List Date: Wed, 23 Oct 2019 19:22:00 +0100 Message-Id: X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Cc: Martin Fuzzey Subject: [U-Boot] [PATCH v2 39/41] power: pmic: add driver for Dialog DA9063 PMIC X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.18 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" From: Martin Fuzzey This adds the basic register access operations and child regulator binding (if a regulator driver exists). Robert Beckett: simplify accesses by using bottom bit of address as offset overflow. This avoids the need to track which page we are on. Signed-off-by: Martin Fuzzey Signed-off-by: Robert Beckett --- drivers/power/pmic/Kconfig | 7 + drivers/power/pmic/Makefile | 1 + drivers/power/pmic/da9063.c | 130 +++++++++++++++ include/power/da9063_pmic.h | 308 ++++++++++++++++++++++++++++++++++++ 4 files changed, 446 insertions(+) create mode 100644 drivers/power/pmic/da9063.c create mode 100644 include/power/da9063_pmic.h diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index 586772fdec..ea3977b4cb 100644 --- a/drivers/power/pmic/Kconfig +++ b/drivers/power/pmic/Kconfig @@ -40,6 +40,13 @@ config PMIC_ACT8846 functions. It uses an I2C interface and is designed for use with tablets and smartphones. +config DM_PMIC_DA9063 + bool "Enable Driver Model for the Dialog DA9063 PMIC" + depends on DM_PMIC + help + This config enables implementation of driver-model pmic uclass features + for PMIC DA9063. The driver implements read/write operations. + config PMIC_AS3722 bool "Enable support for the Austria Micro Systems (AMS) AS7322 PMIC" help diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index 888dbb2857..6d9de2efb1 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_DM_PMIC) += pmic-uclass.o obj-$(CONFIG_DM_PMIC_FAN53555) += fan53555.o +obj-$(CONFIG_DM_PMIC_DA9063) += da9063.o obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o diff --git a/drivers/power/pmic/da9063.c b/drivers/power/pmic/da9063.c new file mode 100644 index 0000000000..abda7a5a40 --- /dev/null +++ b/drivers/power/pmic/da9063.c @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Flowbird + * Martin Fuzzey + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct pmic_child_info pmic_children_info[] = { + { .prefix = "ldo", .driver = DA9063_LDO_DRIVER }, + { .prefix = "b", .driver = DA9063_BUCK_DRIVER }, + { }, +}; + +/* + * The register map is non contiguous and attempts to read in the holes fail. + * But "pmic dump" tries to dump the full register map. + * So define the holes here so we can fix that. + */ +struct da9063_reg_hole { + u16 first; + u16 last; +}; + +static const struct da9063_reg_hole da9063_reg_holes[] = { + DA9063_REG_HOLE_1, + DA9063_REG_HOLE_2, + DA9063_REG_HOLE_3, + /* These aren't readable. I can't see why from the datasheet but + * attempts to read fail and the kernel marks them unreadable too, + */ + {DA9063_REG_OTP_COUNT, DA9063_REG_OTP_DATA}, +}; + +static int da9063_reg_count(struct udevice *dev) +{ + return DA9063_NUM_OF_REGS; +} + +static bool da9063_reg_valid(uint reg) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(da9063_reg_holes); i++) { + const struct da9063_reg_hole *hole = &da9063_reg_holes[i]; + + if (reg >= hole->first && reg <= hole->last) + return false; + } + + return true; +} + +static int da9063_write(struct udevice *dev, uint reg, const uint8_t *buff, + int len) +{ + if (dm_i2c_write(dev, reg, buff, len)) { + pr_err("write error to device: %p register: %#x!", dev, reg); + return -EIO; + } + + return 0; +} + +static int da9063_read(struct udevice *dev, uint reg, uint8_t *buff, int len) +{ + if (!da9063_reg_valid(reg)) + return -ENODATA; + + if (dm_i2c_read(dev, reg, buff, len)) { + pr_err("read error from device: %p register: %#x!", dev, reg); + return -EIO; + } + + return 0; +} + +static int da9063_bind(struct udevice *dev) +{ + ofnode regulators_node; + int children; + + regulators_node = dev_read_subnode(dev, "regulators"); + if (!ofnode_valid(regulators_node)) { + debug("%s: %s regulators subnode not found!", __func__, + dev->name); + return -ENXIO; + } + + debug("%s: '%s' - found regulators subnode\n", __func__, dev->name); + + children = pmic_bind_children(dev, regulators_node, pmic_children_info); + if (!children) + debug("%s: %s - no child found\n", __func__, dev->name); + + /* Always return success for this device */ + return 0; +} + +static int da9063_probe(struct udevice *dev) +{ + return i2c_set_chip_addr_offset_mask(dev, 0x1); +} + +static struct dm_pmic_ops da9063_ops = { + .reg_count = da9063_reg_count, + .read = da9063_read, + .write = da9063_write, +}; + +static const struct udevice_id da9063_ids[] = { + { .compatible = "dlg,da9063" }, + { } +}; + +U_BOOT_DRIVER(pmic_da9063) = { + .name = "da9063_pmic", + .id = UCLASS_PMIC, + .of_match = da9063_ids, + .bind = da9063_bind, + .probe = da9063_probe, + .ops = &da9063_ops, +}; diff --git a/include/power/da9063_pmic.h b/include/power/da9063_pmic.h new file mode 100644 index 0000000000..9b0f76c04f --- /dev/null +++ b/include/power/da9063_pmic.h @@ -0,0 +1,308 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Flowbird + * Martin Fuzzey + */ + +#ifndef __DA9063_PMIC_H_ +#define __DA9063_PMIC_H_ + +/* Register definitions below taken from the kernel */ + +/* Page selection I2C or SPI always in the beginning of any page. */ +/* Page 0 : I2C access 0x000 - 0x0FF SPI access 0x000 - 0x07F */ +/* Page 1 : SPI access 0x080 - 0x0FF */ +/* Page 2 : I2C access 0x100 - 0x1FF SPI access 0x100 - 0x17F */ +/* Page 3 : SPI access 0x180 - 0x1FF */ +#define DA9063_REG_PAGE_CON 0x00 + +/* System Control and Event Registers */ +#define DA9063_REG_STATUS_A 0x01 +#define DA9063_REG_STATUS_B 0x02 +#define DA9063_REG_STATUS_C 0x03 +#define DA9063_REG_STATUS_D 0x04 +#define DA9063_REG_FAULT_LOG 0x05 +#define DA9063_REG_EVENT_A 0x06 +#define DA9063_REG_EVENT_B 0x07 +#define DA9063_REG_EVENT_C 0x08 +#define DA9063_REG_EVENT_D 0x09 +#define DA9063_REG_IRQ_MASK_A 0x0A +#define DA9063_REG_IRQ_MASK_B 0x0B +#define DA9063_REG_IRQ_MASK_C 0x0C +#define DA9063_REG_IRQ_MASK_D 0x0D +#define DA9063_REG_CONTROL_A 0x0E +#define DA9063_REG_CONTROL_B 0x0F +#define DA9063_REG_CONTROL_C 0x10 +#define DA9063_REG_CONTROL_D 0x11 +#define DA9063_REG_CONTROL_E 0x12 +#define DA9063_REG_CONTROL_F 0x13 +#define DA9063_REG_PD_DIS 0x14 + +/* GPIO Control Registers */ +#define DA9063_REG_GPIO_0_1 0x15 +#define DA9063_REG_GPIO_2_3 0x16 +#define DA9063_REG_GPIO_4_5 0x17 +#define DA9063_REG_GPIO_6_7 0x18 +#define DA9063_REG_GPIO_8_9 0x19 +#define DA9063_REG_GPIO_10_11 0x1A +#define DA9063_REG_GPIO_12_13 0x1B +#define DA9063_REG_GPIO_14_15 0x1C +#define DA9063_REG_GPIO_MODE0_7 0x1D +#define DA9063_REG_GPIO_MODE8_15 0x1E +#define DA9063_REG_SWITCH_CONT 0x1F + +/* Regulator Control Registers */ +#define DA9063_REG_BCORE2_CONT 0x20 +#define DA9063_REG_BCORE1_CONT 0x21 +#define DA9063_REG_BPRO_CONT 0x22 +#define DA9063_REG_BMEM_CONT 0x23 +#define DA9063_REG_BIO_CONT 0x24 +#define DA9063_REG_BPERI_CONT 0x25 +#define DA9063_REG_LDO1_CONT 0x26 +#define DA9063_REG_LDO2_CONT 0x27 +#define DA9063_REG_LDO3_CONT 0x28 +#define DA9063_REG_LDO4_CONT 0x29 +#define DA9063_REG_LDO5_CONT 0x2A +#define DA9063_REG_LDO6_CONT 0x2B +#define DA9063_REG_LDO7_CONT 0x2C +#define DA9063_REG_LDO8_CONT 0x2D +#define DA9063_REG_LDO9_CONT 0x2E +#define DA9063_REG_LDO10_CONT 0x2F +#define DA9063_REG_LDO11_CONT 0x30 +#define DA9063_REG_SUPPLIES 0x31 +#define DA9063_REG_DVC_1 0x32 +#define DA9063_REG_DVC_2 0x33 + +/* GP-ADC Control Registers */ +#define DA9063_REG_ADC_MAN 0x34 +#define DA9063_REG_ADC_CONT 0x35 +#define DA9063_REG_VSYS_MON 0x36 +#define DA9063_REG_ADC_RES_L 0x37 +#define DA9063_REG_ADC_RES_H 0x38 +#define DA9063_REG_VSYS_RES 0x39 +#define DA9063_REG_ADCIN1_RES 0x3A +#define DA9063_REG_ADCIN2_RES 0x3B +#define DA9063_REG_ADCIN3_RES 0x3C +#define DA9063_REG_MON_A8_RES 0x3D +#define DA9063_REG_MON_A9_RES 0x3E +#define DA9063_REG_MON_A10_RES 0x3F + +/* RTC Calendar and Alarm Registers */ +#define DA9063_REG_COUNT_S 0x40 +#define DA9063_REG_COUNT_MI 0x41 +#define DA9063_REG_COUNT_H 0x42 +#define DA9063_REG_COUNT_D 0x43 +#define DA9063_REG_COUNT_MO 0x44 +#define DA9063_REG_COUNT_Y 0x45 + +#define DA9063_AD_REG_ALARM_MI 0x46 +#define DA9063_AD_REG_ALARM_H 0x47 +#define DA9063_AD_REG_ALARM_D 0x48 +#define DA9063_AD_REG_ALARM_MO 0x49 +#define DA9063_AD_REG_ALARM_Y 0x4A +#define DA9063_AD_REG_SECOND_A 0x4B +#define DA9063_AD_REG_SECOND_B 0x4C +#define DA9063_AD_REG_SECOND_C 0x4D +#define DA9063_AD_REG_SECOND_D 0x4E + +#define DA9063_BB_REG_ALARM_S 0x46 +#define DA9063_BB_REG_ALARM_MI 0x47 +#define DA9063_BB_REG_ALARM_H 0x48 +#define DA9063_BB_REG_ALARM_D 0x49 +#define DA9063_BB_REG_ALARM_MO 0x4A +#define DA9063_BB_REG_ALARM_Y 0x4B +#define DA9063_BB_REG_SECOND_A 0x4C +#define DA9063_BB_REG_SECOND_B 0x4D +#define DA9063_BB_REG_SECOND_C 0x4E +#define DA9063_BB_REG_SECOND_D 0x4F + +#define DA9063_REG_HOLE_1 {0x50, 0x7F} + +/* Sequencer Control Registers */ +#define DA9063_REG_SEQ 0x81 +#define DA9063_REG_SEQ_TIMER 0x82 +#define DA9063_REG_ID_2_1 0x83 +#define DA9063_REG_ID_4_3 0x84 +#define DA9063_REG_ID_6_5 0x85 +#define DA9063_REG_ID_8_7 0x86 +#define DA9063_REG_ID_10_9 0x87 +#define DA9063_REG_ID_12_11 0x88 +#define DA9063_REG_ID_14_13 0x89 +#define DA9063_REG_ID_16_15 0x8A +#define DA9063_REG_ID_18_17 0x8B +#define DA9063_REG_ID_20_19 0x8C +#define DA9063_REG_ID_22_21 0x8D +#define DA9063_REG_ID_24_23 0x8E +#define DA9063_REG_ID_26_25 0x8F +#define DA9063_REG_ID_28_27 0x90 +#define DA9063_REG_ID_30_29 0x91 +#define DA9063_REG_ID_32_31 0x92 +#define DA9063_REG_SEQ_A 0x95 +#define DA9063_REG_SEQ_B 0x96 +#define DA9063_REG_WAIT 0x97 +#define DA9063_REG_EN_32K 0x98 +#define DA9063_REG_RESET 0x99 + +/* Regulator Setting Registers */ +#define DA9063_REG_BUCK_ILIM_A 0x9A +#define DA9063_REG_BUCK_ILIM_B 0x9B +#define DA9063_REG_BUCK_ILIM_C 0x9C +#define DA9063_REG_BCORE2_CFG 0x9D +#define DA9063_REG_BCORE1_CFG 0x9E +#define DA9063_REG_BPRO_CFG 0x9F +#define DA9063_REG_BIO_CFG 0xA0 +#define DA9063_REG_BMEM_CFG 0xA1 +#define DA9063_REG_BPERI_CFG 0xA2 +#define DA9063_REG_VBCORE2_A 0xA3 +#define DA9063_REG_VBCORE1_A 0xA4 +#define DA9063_REG_VBPRO_A 0xA5 +#define DA9063_REG_VBMEM_A 0xA6 +#define DA9063_REG_VBIO_A 0xA7 +#define DA9063_REG_VBPERI_A 0xA8 +#define DA9063_REG_VLDO1_A 0xA9 +#define DA9063_REG_VLDO2_A 0xAA +#define DA9063_REG_VLDO3_A 0xAB +#define DA9063_REG_VLDO4_A 0xAC +#define DA9063_REG_VLDO5_A 0xAD +#define DA9063_REG_VLDO6_A 0xAE +#define DA9063_REG_VLDO7_A 0xAF +#define DA9063_REG_VLDO8_A 0xB0 +#define DA9063_REG_VLDO9_A 0xB1 +#define DA9063_REG_VLDO10_A 0xB2 +#define DA9063_REG_VLDO11_A 0xB3 +#define DA9063_REG_VBCORE2_B 0xB4 +#define DA9063_REG_VBCORE1_B 0xB5 +#define DA9063_REG_VBPRO_B 0xB6 +#define DA9063_REG_VBMEM_B 0xB7 +#define DA9063_REG_VBIO_B 0xB8 +#define DA9063_REG_VBPERI_B 0xB9 +#define DA9063_REG_VLDO1_B 0xBA +#define DA9063_REG_VLDO2_B 0xBB +#define DA9063_REG_VLDO3_B 0xBC +#define DA9063_REG_VLDO4_B 0xBD +#define DA9063_REG_VLDO5_B 0xBE +#define DA9063_REG_VLDO6_B 0xBF +#define DA9063_REG_VLDO7_B 0xC0 +#define DA9063_REG_VLDO8_B 0xC1 +#define DA9063_REG_VLDO9_B 0xC2 +#define DA9063_REG_VLDO10_B 0xC3 +#define DA9063_REG_VLDO11_B 0xC4 + +/* Backup Battery Charger Control Register */ +#define DA9063_REG_BBAT_CONT 0xC5 + +/* GPIO PWM (LED) */ +#define DA9063_REG_GPO11_LED 0xC6 +#define DA9063_REG_GPO14_LED 0xC7 +#define DA9063_REG_GPO15_LED 0xC8 + +/* GP-ADC Threshold Registers */ +#define DA9063_REG_ADC_CFG 0xC9 +#define DA9063_REG_AUTO1_HIGH 0xCA +#define DA9063_REG_AUTO1_LOW 0xCB +#define DA9063_REG_AUTO2_HIGH 0xCC +#define DA9063_REG_AUTO2_LOW 0xCD +#define DA9063_REG_AUTO3_HIGH 0xCE +#define DA9063_REG_AUTO3_LOW 0xCF + +#define DA9063_REG_HOLE_2 {0xD0, 0xFF} + +/* DA9063 Configuration registers */ +/* OTP */ +#define DA9063_REG_OTP_COUNT 0x101 +#define DA9063_REG_OTP_ADDR 0x102 +#define DA9063_REG_OTP_DATA 0x103 + +/* Customer Trim and Configuration */ +#define DA9063_REG_T_OFFSET 0x104 +#define DA9063_REG_INTERFACE 0x105 +#define DA9063_REG_CONFIG_A 0x106 +#define DA9063_REG_CONFIG_B 0x107 +#define DA9063_REG_CONFIG_C 0x108 +#define DA9063_REG_CONFIG_D 0x109 +#define DA9063_REG_CONFIG_E 0x10A +#define DA9063_REG_CONFIG_F 0x10B +#define DA9063_REG_CONFIG_G 0x10C +#define DA9063_REG_CONFIG_H 0x10D +#define DA9063_REG_CONFIG_I 0x10E +#define DA9063_REG_CONFIG_J 0x10F +#define DA9063_REG_CONFIG_K 0x110 +#define DA9063_REG_CONFIG_L 0x111 + +#define DA9063_AD_REG_MON_REG_1 0x112 +#define DA9063_AD_REG_MON_REG_2 0x113 +#define DA9063_AD_REG_MON_REG_3 0x114 +#define DA9063_AD_REG_MON_REG_4 0x115 +#define DA9063_AD_REG_MON_REG_5 0x116 +#define DA9063_AD_REG_MON_REG_6 0x117 +#define DA9063_AD_REG_TRIM_CLDR 0x118 + +#define DA9063_AD_REG_GP_ID_0 0x119 +#define DA9063_AD_REG_GP_ID_1 0x11A +#define DA9063_AD_REG_GP_ID_2 0x11B +#define DA9063_AD_REG_GP_ID_3 0x11C +#define DA9063_AD_REG_GP_ID_4 0x11D +#define DA9063_AD_REG_GP_ID_5 0x11E +#define DA9063_AD_REG_GP_ID_6 0x11F +#define DA9063_AD_REG_GP_ID_7 0x120 +#define DA9063_AD_REG_GP_ID_8 0x121 +#define DA9063_AD_REG_GP_ID_9 0x122 +#define DA9063_AD_REG_GP_ID_10 0x123 +#define DA9063_AD_REG_GP_ID_11 0x124 +#define DA9063_AD_REG_GP_ID_12 0x125 +#define DA9063_AD_REG_GP_ID_13 0x126 +#define DA9063_AD_REG_GP_ID_14 0x127 +#define DA9063_AD_REG_GP_ID_15 0x128 +#define DA9063_AD_REG_GP_ID_16 0x129 +#define DA9063_AD_REG_GP_ID_17 0x12A +#define DA9063_AD_REG_GP_ID_18 0x12B +#define DA9063_AD_REG_GP_ID_19 0x12C + +#define DA9063_BB_REG_CONFIG_M 0x112 +#define DA9063_BB_REG_CONFIG_N 0x113 + +#define DA9063_BB_REG_MON_REG_1 0x114 +#define DA9063_BB_REG_MON_REG_2 0x115 +#define DA9063_BB_REG_MON_REG_3 0x116 +#define DA9063_BB_REG_MON_REG_4 0x117 +#define DA9063_BB_REG_MON_REG_5 0x11E +#define DA9063_BB_REG_MON_REG_6 0x11F +#define DA9063_BB_REG_TRIM_CLDR 0x120 +/* General Purpose Registers */ +#define DA9063_BB_REG_GP_ID_0 0x121 +#define DA9063_BB_REG_GP_ID_1 0x122 +#define DA9063_BB_REG_GP_ID_2 0x123 +#define DA9063_BB_REG_GP_ID_3 0x124 +#define DA9063_BB_REG_GP_ID_4 0x125 +#define DA9063_BB_REG_GP_ID_5 0x126 +#define DA9063_BB_REG_GP_ID_6 0x127 +#define DA9063_BB_REG_GP_ID_7 0x128 +#define DA9063_BB_REG_GP_ID_8 0x129 +#define DA9063_BB_REG_GP_ID_9 0x12A +#define DA9063_BB_REG_GP_ID_10 0x12B +#define DA9063_BB_REG_GP_ID_11 0x12C +#define DA9063_BB_REG_GP_ID_12 0x12D +#define DA9063_BB_REG_GP_ID_13 0x12E +#define DA9063_BB_REG_GP_ID_14 0x12F +#define DA9063_BB_REG_GP_ID_15 0x130 +#define DA9063_BB_REG_GP_ID_16 0x131 +#define DA9063_BB_REG_GP_ID_17 0x132 +#define DA9063_BB_REG_GP_ID_18 0x133 +#define DA9063_BB_REG_GP_ID_19 0x134 + +/* 0x135 - 0x13f are readable, but not documented */ +#define DA9063_REG_HOLE_3 {0x140, 0x17F} + +/* Chip ID and variant */ +#define DA9063_REG_CHIP_ID 0x181 +#define DA9063_REG_CHIP_VARIANT 0x182 +#define DA9063_REG_CUSTOMER_ID 0x183 +#define DA9063_REG_CONFIG_ID 0x184 + +#define DA9063_NUM_OF_REGS (DA9063_REG_CONFIG_ID + 1) + +/* Drivers name */ +#define DA9063_LDO_DRIVER "da9063_ldo" +#define DA9063_BUCK_DRIVER "da9063_buck" + +#endif