diff mbox

[U-Boot,5/6] ARM: zynq: Add reset-gpio property for USB on Zybo

Message ID d8e0b115da1a8349b158cca3a3c02609a68bf4e9.1455359979.git.monstr@monstr.eu
State Accepted
Commit baec7df738532347f4617dce40ad5944c5cefc8a
Delegated to: Michal Simek
Headers show

Commit Message

Michal Simek Feb. 13, 2016, 10:39 a.m. UTC 
DTS syncup with Linux kernel.
Add missing reset-gpio property.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---

This patch is in queue to next kernel version

---
 arch/arm/dts/zynq-zybo.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Michal Simek Feb. 22, 2016, 3:16 p.m. UTC | #1 
On 13.2.2016 11:39, Michal Simek wrote:
> DTS syncup with Linux kernel.
> Add missing reset-gpio property.
> 
> Signed-off-by: Michal Simek <monstr@monstr.eu>
> ---
> 
> This patch is in queue to next kernel version
> 
> ---
>  arch/arm/dts/zynq-zybo.dts | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts
> index fbbb8911910b..d04e9625d29e 100644
> --- a/arch/arm/dts/zynq-zybo.dts
> +++ b/arch/arm/dts/zynq-zybo.dts
> @@ -31,8 +31,9 @@
>  	};
>  
>  	usb_phy0: phy0 {
> -		compatible = "usb-nop-xceiv";
>  		#phy-cells = <0>;
> +		compatible = "usb-nop-xceiv";
> +		reset-gpios = <&gpio0 46 1>;
>  	};
>  };
>  

Applied to zynq repo.

Thanks,
Michal
diff mbox

Patch

diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts
index fbbb8911910b..d04e9625d29e 100644
--- a/arch/arm/dts/zynq-zybo.dts
+++ b/arch/arm/dts/zynq-zybo.dts
@@ -31,8 +31,9 @@ 
 	};
 
 	usb_phy0: phy0 {
-		compatible = "usb-nop-xceiv";
 		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio0 46 1>;
 	};
 };