diff mbox series

[V4,12/14] doc: iot2050: Add a note about the watchdog firmware

Message ID b2a2aa14643429251c124c7c099059c52c84f93b.1675325279.git.jan.kiszka@siemens.com
State Superseded
Delegated to: Tom Rini
Headers show
Series IOT2050-related enhancements | expand

Commit Message

Jan Kiszka Feb. 2, 2023, 8:07 a.m. UTC 
From: Jan Kiszka <jan.kiszka@siemens.com>

This is enabled by default, thus should be described as well.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 doc/board/siemens/iot2050.rst | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/doc/board/siemens/iot2050.rst b/doc/board/siemens/iot2050.rst
index cb49a0e36bf..efe94a448a9 100644
--- a/doc/board/siemens/iot2050.rst
+++ b/doc/board/siemens/iot2050.rst
@@ -27,6 +27,10 @@  The following binaries from that source need to be present in the build folder:
  - seboot_pg1.bin
  - seboot_pg2.bin
 
+When using the watchdog, a related firmware for the R5 core(s) is needed, e.g.
+https://github.com/siemens/k3-rti-wdt. The name and location of the image is
+configured via CONFIG_WDT_K3_RTI_FW_FILE.
+
 For building an image containing the OTP key provisioning data, below binary
 needs to be present in the build folder: