diff mbox series

cmd: Add Kconfig option for multiprocessor cmds

Message ID af2b143a1cc6ad16a088c3c72e580bdd276f9baa.1642162053.git.michal.simek@xilinx.com
State Changes Requested
Delegated to: Tom Rini
Headers show
Series cmd: Add Kconfig option for multiprocessor cmds | expand

Commit Message

Michal Simek Jan. 14, 2022, 12:07 p.m. UTC
From: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>

Add Kconfig option(CONFIG_CMD_MP) to enable or disable multiprocessor
commands. Compile cmd/mp.c based on CONFIG_CMD_MP.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 cmd/Kconfig  | 8 ++++++++
 cmd/Makefile | 2 +-
 2 files changed, 9 insertions(+), 1 deletion(-)

Comments

Tom Rini Jan. 14, 2022, 8 p.m. UTC | #1
On Fri, Jan 14, 2022 at 01:07:34PM +0100, Michal Simek wrote:

> From: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
> 
> Add Kconfig option(CONFIG_CMD_MP) to enable or disable multiprocessor
> commands. Compile cmd/mp.c based on CONFIG_CMD_MP.
> 
> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
> 
>  cmd/Kconfig  | 8 ++++++++
>  cmd/Makefile | 2 +-
>  2 files changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> index 5b30b13e438f..1e3eef4437b5 100644
> --- a/cmd/Kconfig
> +++ b/cmd/Kconfig
> @@ -1827,6 +1827,14 @@ config MP
>  	  different processors in multiprocessor
>  	  cases.
>  
> +config CMD_MP
> +	bool "support for multiprocessor commands"
> +	depends on MP
> +	default y
> +	help
> +	  This enables commands to bringup different processors
> +	  in multiprocessor cases.
> +
>  config CMD_TIMER
>  	bool "timer"
>  	help
> diff --git a/cmd/Makefile b/cmd/Makefile
> index 891819ae0f6b..9e8074bb7e49 100644
> --- a/cmd/Makefile
> +++ b/cmd/Makefile
> @@ -101,7 +101,7 @@ obj-$(CONFIG_CMD_MDIO) += mdio.o
>  obj-$(CONFIG_CMD_SLEEP) += sleep.o
>  obj-$(CONFIG_CMD_MMC) += mmc.o
>  obj-$(CONFIG_CMD_OPTEE_RPMB) += optee_rpmb.o
> -obj-$(CONFIG_MP) += mp.o
> +obj-$(CONFIG_CMD_MP) += mp.o
>  obj-$(CONFIG_CMD_MTD) += mtd.o
>  obj-$(CONFIG_CMD_MTDPARTS) += mtdparts.o
>  obj-$(CONFIG_CMD_CLONE) += clone.o

The problem is that there's already an entry for MP in cmd/Kconfig.  So
yes, it should be fixed for consistency, but the current entry
renamed/moved.  Thanks!
Michal Simek Jan. 17, 2022, 9:18 a.m. UTC | #2
On 1/14/22 21:00, Tom Rini wrote:
> On Fri, Jan 14, 2022 at 01:07:34PM +0100, Michal Simek wrote:
> 
>> From: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
>>
>> Add Kconfig option(CONFIG_CMD_MP) to enable or disable multiprocessor
>> commands. Compile cmd/mp.c based on CONFIG_CMD_MP.
>>
>> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
>> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>> ---
>>
>>   cmd/Kconfig  | 8 ++++++++
>>   cmd/Makefile | 2 +-
>>   2 files changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/cmd/Kconfig b/cmd/Kconfig
>> index 5b30b13e438f..1e3eef4437b5 100644
>> --- a/cmd/Kconfig
>> +++ b/cmd/Kconfig
>> @@ -1827,6 +1827,14 @@ config MP
>>   	  different processors in multiprocessor
>>   	  cases.
>>   
>> +config CMD_MP
>> +	bool "support for multiprocessor commands"
>> +	depends on MP
>> +	default y
>> +	help
>> +	  This enables commands to bringup different processors
>> +	  in multiprocessor cases.
>> +
>>   config CMD_TIMER
>>   	bool "timer"
>>   	help
>> diff --git a/cmd/Makefile b/cmd/Makefile
>> index 891819ae0f6b..9e8074bb7e49 100644
>> --- a/cmd/Makefile
>> +++ b/cmd/Makefile
>> @@ -101,7 +101,7 @@ obj-$(CONFIG_CMD_MDIO) += mdio.o
>>   obj-$(CONFIG_CMD_SLEEP) += sleep.o
>>   obj-$(CONFIG_CMD_MMC) += mmc.o
>>   obj-$(CONFIG_CMD_OPTEE_RPMB) += optee_rpmb.o
>> -obj-$(CONFIG_MP) += mp.o
>> +obj-$(CONFIG_CMD_MP) += mp.o
>>   obj-$(CONFIG_CMD_MTD) += mtd.o
>>   obj-$(CONFIG_CMD_MTDPARTS) += mtdparts.o
>>   obj-$(CONFIG_CMD_CLONE) += clone.o
> 
> The problem is that there's already an entry for MP in cmd/Kconfig.  So
> yes, it should be fixed for consistency, but the current entry
> renamed/moved.  Thanks!

Consistency is one part. Second part is that MP code can be called without any 
command that's why having two symbols make sense.
Anyway I have sent v2 with moving MP to Kconfig.

Thanks,
Michal
diff mbox series

Patch

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 5b30b13e438f..1e3eef4437b5 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1827,6 +1827,14 @@  config MP
 	  different processors in multiprocessor
 	  cases.
 
+config CMD_MP
+	bool "support for multiprocessor commands"
+	depends on MP
+	default y
+	help
+	  This enables commands to bringup different processors
+	  in multiprocessor cases.
+
 config CMD_TIMER
 	bool "timer"
 	help
diff --git a/cmd/Makefile b/cmd/Makefile
index 891819ae0f6b..9e8074bb7e49 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -101,7 +101,7 @@  obj-$(CONFIG_CMD_MDIO) += mdio.o
 obj-$(CONFIG_CMD_SLEEP) += sleep.o
 obj-$(CONFIG_CMD_MMC) += mmc.o
 obj-$(CONFIG_CMD_OPTEE_RPMB) += optee_rpmb.o
-obj-$(CONFIG_MP) += mp.o
+obj-$(CONFIG_CMD_MP) += mp.o
 obj-$(CONFIG_CMD_MTD) += mtd.o
 obj-$(CONFIG_CMD_MTDPARTS) += mtdparts.o
 obj-$(CONFIG_CMD_CLONE) += clone.o