diff mbox series

arm64: rk3399: add support NanoPi R4S

Message ID CANxuSJPk9=BaXqQwMj2L1KNdDgxpFcm7dQ_uWRZd-2t4yqUE6Q@mail.gmail.com
State Superseded
Delegated to: Kever Yang
Headers show
Series arm64: rk3399: add support NanoPi R4S | expand

Commit Message

Xiaobo Tian Jan. 28, 2021, 1:03 p.m. UTC
From bc4d38377b8f745b39f3028a14dff23203ee39d3 Mon Sep 17 00:00:00 2001
From: Xiaobo Tian <peterwillcn@gmail.com>
Date: Thu, 28 Jan 2021 20:58:52 +0800
Subject: [PATCH] arm64: rk3399: Add support NanoPi R4s

NanoPi R4s [1] is SBC base on Rockchip RK3399 hexa-core processor with
dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card
support,
including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0
port.
port.It also has two GPIO headers which allows further peripherals to be
used.

The devicetree file is taken of the rk3399 nanopi4 Linux kernel [2].

[1] https://wiki.friendlyarm.com/wiki/index.php/NanoPi_R4S
[2]
https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi

Cc: Tom Rini <trini@konsulko.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Xiaobo Tian <peterwillcn@gmail.com>
---
 arch/arm/dts/Makefile                      |   1 +
 arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi |   7 ++
 arch/arm/dts/rk3399-nanopi-r4s.dts         | 120 +++++++++++++++++++++
 configs/nanopi-r4s-rk3399_defconfig        |  62 +++++++++++
 4 files changed, 190 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3399-nanopi-r4s.dts
 create mode 100644 configs/nanopi-r4s-rk3399_defconfig

+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
--
2.30.0
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 858b79ac97..528dfe069e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -92,6 +92,7 @@  dtb-$(CONFIG_ROCKCHIP_RK3288) += \
  rk3288-evb.dtb \
  rk3288-firefly.dtb \
  rk3288-miqi.dtb \
+ rk3399-nanopi-r4s.dtb \
  rk3288-phycore-rdk.dtb \
  rk3288-popmetal.dtb \
  rk3288-rock2-square.dtb \
diff --git a/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
new file mode 100644
index 0000000000..05f785e662
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
@@ -0,0 +1,7 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Xiaobo <tianxiaobo@gelaxy.io>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts
b/arch/arm/dts/rk3399-nanopi-r4s.dts
new file mode 100644
index 0000000000..5c65447f0e
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -0,0 +1,120 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (C) 2020 Xiaobo <tianxiaobo@gelaxy.io>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPi R4S";
+ compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
+
+ vdd_5v: vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ /* FIXME: adjust leveles for the connected fan */
+ cooling-levels = <0 12 18 255>;
+ #cooling-cells = <2>;
+ fan-supply = <&vdd_5v>;
+ pwms = <&pwm1 0 50000 0>;
+ };
+};
+
+&cpu_thermal {
+ trips {
+ cpu_warm: cpu_warm {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu_hot {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map2 {
+ trip = <&cpu_warm>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map3 {
+ trip = <&cpu_hot>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&emmc_phy {
+ status = "disabled";
+};
+
+&fusb0 {
+ status = "disabled";
+};
+
+&leds {
+ lan_led: led-1 {
+ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-r4s:green:lan";
+ };
+
+ wan_led: led-2 {
+ gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-r4s:green:wan";
+ };
+};
+
+&leds_gpio {
+ rockchip,pins =
+ <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&pcie0 {
+ max-link-speed = <1>;
+ num-lanes = <1>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
+};
+
+&sdhci {
+ status = "disabled";
+};
+
+&sdio0 {
+ status = "disabled";
+};
+
+&sdmmc {
+ host-index-min = <1>;
+};
+
+&u2phy0_host {
+ phy-supply = <&vdd_5v>;
+};
+
+&u2phy1_host {
+ status = "disabled";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "host";
+};
+
+&vcc3v3_sys {
+ vin-supply = <&vcc5v0_sys>;
+};
diff --git a/configs/nanopi-r4s-rk3399_defconfig
b/configs/nanopi-r4s-rk3399_defconfig
new file mode 100644
index 0000000000..0a3c28b012
--- /dev/null
+++ b/configs/nanopi-r4s-rk3399_defconfig
@@ -0,0 +1,62 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_TARGET_EVB_RK3399=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s.dtb"
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_TPL=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-r4s"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
interrupt-parent assigned-clocks assigned-clock-rates
assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y