diff mbox series

[1/3] arm64: zynqmp: Fix i2c addresses for vck190 SC

Message ID 4fa86fffa9cb8abe633fbc5a9c55bea249b5edfb.1655287013.git.michal.simek@amd.com
State Accepted
Commit 0b0d433b6c73fafc448c02b75196391ab3031a84
Delegated to: Michal Simek
Headers show
Series arm64: zynqmp: Some DT updates | expand

Commit Message

Michal Simek June 15, 2022, 9:56 a.m. UTC 
From: Michal Simek <michal.simek@xilinx.com>

si570 is normally at 0x5d address and address is not aligned with address
in node.
8T49N240 can't be at 0xd8 that's why it is shifter by one bit.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
---

 arch/arm/dts/zynqmp-e-a2197-00-revA.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
index 726183782305..37c56181c9cb 100644
--- a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
@@ -294,10 +294,10 @@ 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			clock_8t49n287: clock-generator@d8 { /* u39 8T49N240 */
+			clock_8t49n287: clock-generator@6c { /* u39 8T49N240 */
 				#clock-cells = <1>; /* author David Cater <david.cater@idt.com>*/
 				compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */
-				reg = <0xd8>;
+				reg = <0x6c>;
 				/* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */
 				/* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */
 			};
@@ -447,7 +447,7 @@ 
 			si570_user1: clock-generator@5d { /* u205 */
 				#clock-cells = <0>;
 				compatible = "silabs,si570";
-				reg = <0x5f>;
+				reg = <0x5d>;
 				temperature-stability = <50>;
 				factory-fout = <100000000>;
 				clock-frequency = <100000000>;