@@ -59,6 +59,14 @@
};
};
+ reboot-mode0 {
+ compatible = "reboot-mode-gpio";
+ gpios = <&gpio_c 0 GPIO_ACTIVE_HIGH>, <&gpio_c 1 GPIO_ACTIVE_HIGH>;
+ u-boot,env-variable = "bootstatus";
+ mode-test = <0x01>;
+ mode-download = <0x03>;
+ };
+
audio: audio-codec {
compatible = "sandbox,audio-codec";
#sound-dai-cells = <1>;
@@ -287,3 +287,5 @@ CONFIG_TEST_FDTDEC=y
CONFIG_UNIT_TEST=y
CONFIG_UT_TIME=y
CONFIG_UT_DM=y
+CONFIG_DM_REBOOT_MODE=y
+CONFIG_DM_REBOOT_MODE_GPIO=y
new file mode 100644
@@ -0,0 +1,20 @@
+GPIO Reboot Mode Configuration
+
+Required Properties:
+- compatible: must be "reboot-mode-gpio".
+- gpios: list of gpios that are used to calculate the reboot-mode magic value.
+ Every gpio represents a bit in the magic value in the same order
+ as defined in device tree.
+- modes: list of properties that define the modes and associated unique ids.
+
+Optional Properties:
+- u-boot,env-variable: used to save the reboot mode (default: reboot-mode).
+
+Example:
+ reboot-mode {
+ compatible = "reboot-mode-gpio";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>, <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ u-boot,env-variable = "bootstatus";
+ mode-test = <0x00000001>;
+ mode-download = <0x00000002>;
+ };
@@ -15,4 +15,13 @@ config DM_REBOOT_MODE
adjust the boot process based on reboot mode parameter
passed to U-Boot.
+config DM_REBOOT_MODE_GPIO
+ bool "Use GPIOs as reboot mode backend"
+ depends on DM_REBOOT_MODE
+ default n
+ help
+ Use GPIOs to control the reboot mode. This will allow users to boot
+ a device in a specific mode by using a GPIO that can be controlled
+ outside U-Boot.
+
endmenu
@@ -5,3 +5,4 @@
#
obj-$(CONFIG_DM_REBOOT_MODE) += reboot-mode-uclass.o
+obj-$(CONFIG_DM_REBOOT_MODE_GPIO) += reboot-mode-gpio.o
new file mode 100644
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c), Vaisala Oyj
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <dm.h>
+#include <dm/devres.h>
+#include <errno.h>
+#include <reboot-mode/reboot-mode-gpio.h>
+#include <reboot-mode/reboot-mode.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int reboot_mode_get(struct udevice *dev, u32 *buf)
+{
+ int ret;
+ struct reboot_mode_gpio_platdata *plat_data;
+
+ if (!buf)
+ return -EINVAL;
+
+ plat_data = dev_get_plat(dev);
+ if (!plat_data)
+ return -EINVAL;
+
+ ret = dm_gpio_get_values_as_int(plat_data->gpio_desc,
+ plat_data->gpio_count);
+ if (ret < 0)
+ return ret;
+
+ *buf = ret;
+
+ return 0;
+}
+
+static int reboot_mode_probe(struct udevice *dev)
+{
+ struct reboot_mode_gpio_platdata *plat_data;
+
+ plat_data = dev_get_plat(dev);
+ if (!plat_data)
+ return -EINVAL;
+
+ int ret;
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+ ret = gpio_get_list_count(dev, "gpios");
+ if (ret < 0)
+ return ret;
+
+ plat_data->gpio_count = ret;
+#endif
+
+ if (plat_data->gpio_count <= 0)
+ return -EINVAL;
+
+ plat_data->gpio_desc = devm_kcalloc(dev, plat_data->gpio_count,
+ sizeof(struct gpio_desc), 0);
+ if (!plat_data->gpio_desc)
+ return -ENOMEM;
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+ ret = gpio_request_list_by_name(dev, "gpios", plat_data->gpio_desc,
+ plat_data->gpio_count, GPIOD_IS_IN);
+ if (ret < 0)
+ return ret;
+#else
+ for (int i = 0; i < plat_data->gpio_count; i++) {
+ struct reboot_mode_gpio_config *gpio =
+ plat_data->gpios_config + i;
+ struct gpio_desc *desc = plat_data->gpio_desc + i;
+
+ ret = uclass_get_device_by_seq(UCLASS_GPIO,
+ gpio->gpio_dev_offset,
+ &desc->dev);
+ if (ret < 0)
+ return ret;
+
+ desc->flags = gpio->flags;
+ desc->offset = gpio->gpio_offset;
+
+ ret = dm_gpio_request(desc, "");
+ if (ret < 0)
+ return ret;
+
+ ret = dm_gpio_set_dir(desc);
+ if (ret < 0)
+ return ret;
+ }
+#endif
+ return 0;
+}
+
+static int reboot_mode_remove(struct udevice *dev)
+{
+ struct reboot_mode_gpio_platdata *plat_data;
+
+ plat_data = dev_get_plat(dev);
+ if (!plat_data)
+ return -EINVAL;
+
+ return gpio_free_list(dev, plat_data->gpio_desc, plat_data->gpio_count);
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+static const struct udevice_id reboot_mode_ids[] = {
+ { .compatible = "reboot-mode-gpio", 0 },
+ { }
+};
+#endif
+
+static const struct reboot_mode_ops reboot_mode_gpio_ops = {
+ .get = reboot_mode_get,
+};
+
+U_BOOT_DRIVER(reboot_mode_gpio) = {
+ .name = "reboot-mode-gpio",
+ .id = UCLASS_REBOOT_MODE,
+ .probe = reboot_mode_probe,
+ .remove = reboot_mode_remove,
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+ .of_match = reboot_mode_ids,
+#endif
+ .plat_auto = sizeof(struct reboot_mode_gpio_platdata),
+ .ops = &reboot_mode_gpio_ops,
+};
new file mode 100644
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) Vaisala Oyj.
+ */
+
+#ifndef REBOOT_MODE_REBOOT_MODE_GPIO_H_
+#define REBOOT_MODE_REBOOT_MODE_GPIO_H_
+
+#include <asm/gpio.h>
+
+/*
+ * In case of initializing the driver statically (using U_BOOT_DEVICE macro),
+ * we can use this struct to declare the pins used.
+ */
+
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
+struct reboot_mode_gpio_config {
+ int gpio_dev_offset;
+ int gpio_offset;
+ int flags;
+};
+#endif
+
+struct reboot_mode_gpio_platdata {
+ struct gpio_desc *gpio_desc;
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
+ struct reboot_mode_gpio_config *gpios_config;
+#endif
+ int gpio_count;
+};
+
+#endif /* REBOOT_MODE_REBOOT_MODE_GPIO_H_ */
@@ -27,6 +27,7 @@ obj-$(CONFIG_AXI) += axi.o
obj-$(CONFIG_BLK) += blk.o
obj-$(CONFIG_BUTTON) += button.o
obj-$(CONFIG_DM_BOOTCOUNT) += bootcount.o
+obj-$(CONFIG_DM_REBOOT_MODE) += reboot-mode.o
obj-$(CONFIG_CLK) += clk.o clk_ccf.o
obj-$(CONFIG_CPU) += cpu.o
obj-$(CONFIG_CROS_EC) += cros_ec.o
new file mode 100644
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) 2018 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <reboot-mode/reboot-mode.h>
+#include <env.h>
+#include <log.h>
+#include <asm/gpio.h>
+#include <asm/test.h>
+#include <dm/test.h>
+#include <test/test.h>
+#include <test/ut.h>
+
+static int dm_test_reboot_mode_gpio(struct unit_test_state *uts)
+{
+ struct udevice *gpio_dev;
+ struct udevice *rm_dev;
+ int gpio0_offset = 0;
+ int gpio1_offset = 1;
+
+ uclass_get_device_by_name(UCLASS_GPIO, "pinmux-gpios", &gpio_dev);
+
+ /* Prepare the GPIOs for "download" mode */
+ sandbox_gpio_set_direction(gpio_dev, gpio0_offset, 0);
+ sandbox_gpio_set_direction(gpio_dev, gpio1_offset, 0);
+ sandbox_gpio_set_value(gpio_dev, gpio0_offset, 1);
+ sandbox_gpio_set_value(gpio_dev, gpio1_offset, 1);
+
+ ut_assertok(uclass_get_device_by_name(UCLASS_REBOOT_MODE,
+ "reboot-mode0", &rm_dev));
+ ut_assertok(dm_reboot_mode_update(rm_dev));
+
+ ut_asserteq_str("download", env_get("bootstatus"));
+
+ return 0;
+}
+
+DM_TEST(dm_test_reboot_mode_gpio,
+ UT_TESTF_PROBE_TEST | UT_TESTF_SCAN_FDT | UT_TESTF_FLAT_TREE);
A use case for controlling the boot mode is when the user wants to control the device boot by pushing a button without needing to go in user-space. Add a new backed for reboot mode where GPIOs are used to control the reboot-mode. The driver is able to scan a predefined list of GPIOs and return the magic value. Having the modes associated with the magic value generated based on the GPIO values, allows the reboot mode uclass to select the proper mode. Signed-off-by: Nandor Han <nandor.han@vaisala.com> --- arch/sandbox/dts/test.dts | 8 ++ configs/sandbox_defconfig | 2 + .../reboot-mode/reboot-mode-gpio.txt | 20 +++ drivers/reboot-mode/Kconfig | 9 ++ drivers/reboot-mode/Makefile | 1 + drivers/reboot-mode/reboot-mode-gpio.c | 128 ++++++++++++++++++ include/reboot-mode/reboot-mode-gpio.h | 32 +++++ test/dm/Makefile | 1 + test/dm/reboot-mode.c | 42 ++++++ 9 files changed, 243 insertions(+) create mode 100644 doc/device-tree-bindings/reboot-mode/reboot-mode-gpio.txt create mode 100644 drivers/reboot-mode/reboot-mode-gpio.c create mode 100644 include/reboot-mode/reboot-mode-gpio.h create mode 100644 test/dm/reboot-mode.c