diff mbox series

[2/4] xilinx: zynq: Add support for saving env based on bootmode

Message ID 2ed7949ab32555af4464bce3eac276944ea82c44.1617098995.git.michal.simek@xilinx.com
State New
Delegated to: Michal Simek
Headers show
Series xilinx: Enable redundant variables for all Xilinx SoCs | expand

Commit Message

Michal Simek March 30, 2021, 10:09 a.m. UTC
From: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>

Enable saving variables to MMC(FAT), NAND, SPI based on primary
bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE).

Since most of the flashes on zynq evaluation boards are 16MB in size,
set default ENV_OFFSET to 15MB(0xE00000).

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 board/xilinx/zynq/board.c          | 32 ++++++++++++++++++++++++++++++
 configs/xilinx_zynq_virt_defconfig |  5 ++++-
 2 files changed, 36 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 7533dddb9b65..e2e9b3f0f78c 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -9,6 +9,7 @@ 
 #include <log.h>
 #include <dm/uclass.h>
 #include <env.h>
+#include <env_internal.h>
 #include <fdtdec.h>
 #include <fpga.h>
 #include <malloc.h>
@@ -119,3 +120,34 @@  int dram_init(void)
 	return 0;
 }
 #endif
+
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+	u32 bootmode = zynq_slcr_get_boot_mode() & ZYNQ_BM_MASK;
+
+	if (prio)
+		return ENVL_UNKNOWN;
+
+	switch (bootmode) {
+	case ZYNQ_BM_SD:
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))
+			return ENVL_FAT;
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))
+			return ENVL_EXT4;
+		return ENVL_UNKNOWN;
+	case ZYNQ_BM_NAND:
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND))
+			return ENVL_NAND;
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_UBI))
+			return ENVL_UBI;
+		return ENVL_UNKNOWN;
+	case ZYNQ_BM_NOR:
+	case ZYNQ_BM_QSPI:
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
+			return ENVL_SPI_FLASH;
+		return ENVL_UNKNOWN;
+	case ZYNQ_BM_JTAG:
+	default:
+		return ENVL_NOWHERE;
+	}
+}
diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index 2fe53182caa8..bdd6be2b9079 100644
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -4,6 +4,7 @@  CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000
+CONFIG_ENV_OFFSET=0xE00000
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_STACK_R_ADDR=0x200000
@@ -55,7 +56,9 @@  CONFIG_CMD_MTDPARTS_SPREAD=y
 CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
 CONFIG_CMD_UBI=y
 CONFIG_OF_LIST="zynq-zc702 zynq-zc706 zynq-zc770-xm010 zynq-zc770-xm011 zynq-zc770-xm011-x16 zynq-zc770-xm012 zynq-zc770-xm013 zynq-cc108 zynq-microzed zynq-minized zynq-picozed zynq-zed zynq-zturn zynq-zturn-v5 zynq-zybo zynq-zybo-z7 zynq-dlc20-rev1.0"
-CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_IS_IN_NAND=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y