@@ -60,9 +60,11 @@ config SYSRESET_CMD_POWEROFF
endif
config SYSRESET_CV1800B
- bool "Enable support for Sophgo cv1800b System Reset"
+ bool "Enable support for Sophgo CV1800B system reset"
+ depends on RTC_CV1800B
help
- Enable system reset support for Sophgo cv1800b SoC.
+ Enable system reset and power control through the RTC subsystem
+ found on Sophgo CV1800 series SoCs.
config POWEROFF_GPIO
bool "Enable support for GPIO poweroff driver"
@@ -1,64 +1,86 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2024, Kongyang Liu <seashell11234455@gmail.com>
+ * Copyright (c) 2026, Zhuxu Ran <zhuxu_ran@zohomail.com>
*/
#include <dm.h>
-#include <stdbool.h>
+#include <regmap.h>
#include <sysreset.h>
-#include <wait_bit.h>
-#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
#include <linux/errno.h>
-#define REG_RTC_BASE (void *)0x05026000
-#define REG_RTC_CTRL_BASE (void *)0x05025000
-#define REG_RTC_EN_SHDN_REQ (REG_RTC_BASE + 0xc0)
-#define REG_RTC_EN_PWR_CYC_REQ (REG_RTC_BASE + 0xc8)
-#define REG_RTC_EN_WARM_RST_REQ (REG_RTC_BASE + 0xcc)
-#define REG_RTC_CTRL_UNLOCKKEY (REG_RTC_CTRL_BASE + 0x4)
-#define REG_RTC_CTRL (REG_RTC_CTRL_BASE + 0x8)
+#define RTC_CTRL_UNLOCKKEY 0x0004
+#define RTC_CTRL 0x0008
+#define RTC_EN_SHDN_REQ 0x10c0
+#define RTC_EN_PWR_CYC_REQ 0x10c8
+#define RTC_EN_WARM_RST_REQ 0x10cc
-#define CTRL_UNLOCKKEY_MAGIC 0xAB18
+#define CTRL_UNLOCKKEY_MAGIC 0xab18
-/* REG_RTC_CTRL */
-#define BIT_REQ_SHDN BIT(0)
-#define BIT_REQ_PWR_CYC BIT(3)
-#define BIT_REQ_WARM_RST BIT(4)
+#define BIT_REQ_SHDN BIT(0)
+#define BIT_REQ_PWR_CYC BIT(3)
+#define BIT_REQ_WARM_RST BIT(4)
-static struct {
- void *pre_req_reg;
+struct cv1800b_sysreset_priv {
+ struct regmap *regmap;
+};
+
+static const struct {
+ u32 pre_req_reg;
u32 req_bit;
} reset_info[SYSRESET_COUNT] = {
- [SYSRESET_WARM] = { REG_RTC_EN_WARM_RST_REQ, BIT_REQ_WARM_RST },
- [SYSRESET_COLD] = { REG_RTC_EN_WARM_RST_REQ, BIT_REQ_WARM_RST },
- [SYSRESET_POWER] = { REG_RTC_EN_PWR_CYC_REQ, BIT_REQ_PWR_CYC },
- [SYSRESET_POWER_OFF] = { REG_RTC_EN_SHDN_REQ, BIT_REQ_SHDN },
+ [SYSRESET_WARM] = { RTC_EN_WARM_RST_REQ, BIT_REQ_WARM_RST },
+ [SYSRESET_COLD] = { RTC_EN_WARM_RST_REQ, BIT_REQ_WARM_RST },
+ [SYSRESET_POWER] = { RTC_EN_PWR_CYC_REQ, BIT_REQ_PWR_CYC },
+ [SYSRESET_POWER_OFF] = { RTC_EN_SHDN_REQ, BIT_REQ_SHDN },
};
static int cv1800b_sysreset_request(struct udevice *dev, enum sysreset_t type)
{
- u32 reg;
+ struct cv1800b_sysreset_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ if (type >= SYSRESET_COUNT)
+ return -EINVAL;
- writel(1, reset_info[type].pre_req_reg);
- writel(CTRL_UNLOCKKEY_MAGIC, REG_RTC_CTRL_UNLOCKKEY);
- reg = readl(REG_RTC_CTRL);
- writel(0xFFFF0800 | reset_info[type].req_bit, REG_RTC_CTRL);
+ ret = regmap_write(priv->regmap, reset_info[type].pre_req_reg, 1);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(priv->regmap, RTC_CTRL_UNLOCKKEY,
+ CTRL_UNLOCKKEY_MAGIC);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(priv->regmap, RTC_CTRL,
+ 0xffff0800 | reset_info[type].req_bit);
+ if (ret)
+ return ret;
return -EINPROGRESS;
}
+static int cv1800b_sysreset_probe(struct udevice *dev)
+{
+ struct cv1800b_sysreset_priv *priv = dev_get_priv(dev);
+
+ priv->regmap = devm_regmap_init(dev, NULL, NULL, NULL);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ return 0;
+}
+
static struct sysreset_ops cv1800b_sysreset = {
.request = cv1800b_sysreset_request,
};
-static const struct udevice_id cv1800b_sysreset_ids[] = {
- { .compatible = "sophgo,cv1800b-sysreset", },
- {},
-};
-
U_BOOT_DRIVER(sysreset_cv1800b) = {
.name = "cv1800b_sysreset",
- .id = UCLASS_SYSRESET,
- .ops = &cv1800b_sysreset,
- .of_match = cv1800b_sysreset_ids
+ .id = UCLASS_SYSRESET,
+ .probe = cv1800b_sysreset_probe,
+ .ops = &cv1800b_sysreset,
+ .priv_auto = sizeof(struct cv1800b_sysreset_priv),
};
The CV1800B system reset driver uses hard-coded RTC register addresses. Initialize a register map from the RTC node shared with its parent device instead, and propagate register access errors. Require the RTC driver that binds the sysreset child. Preserve the existing reset requests, including the warm-reset sequence used for SYSRESET_COLD. Signed-off-by: Zhuxu Ran <zhuxu_ran@zohomail.com> --- drivers/sysreset/Kconfig | 6 ++- drivers/sysreset/sysreset_cv1800b.c | 90 +++++++++++++++++++++++-------------- 2 files changed, 60 insertions(+), 36 deletions(-)