[33/34] sunxi: A523: add DT files from Linux v3 branch

Message ID	20250323113544.7933-34-andre.przywara@arm.com
State	New
Delegated to:	Andre Przywara
Headers	show Return-Path: <u-boot-bounces@lists.denx.de> From: Andre Przywara <andre.przywara@arm.com> To: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org>, Jernej Skrabec <jernej.skrabec@gmail.com>, Mikhail Kalashnikov <iuncuim@gmail.com>, u-boot@lists.denx.de, linux-sunxi@lists.linux.dev Subject: [PATCH 33/34] sunxi: A523: add DT files from Linux v3 branch Date: Sun, 23 Mar 2025 11:35:43 +0000 Message-ID: <20250323113544.7933-34-andre.przywara@arm.com> In-Reply-To: <20250323113544.7933-1-andre.przywara@arm.com> References: <20250323113544.7933-1-andre.przywara@arm.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: list Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
Series	sunxi: clock refactoring and Allwinner A523 support \| expand [00/34] sunxi: clock refactoring and Allwinner A523 support [01/34] sunxi: clock: H6: drop usage of struct sunxi_ccm_reg [02/34] sunxi: mmc: remove usage of struct sunxi_ccm_reg [03/34] sunxi: H616: dram: remove usage of struct sunxi_ccm_reg [04/34] sunxi: H6: dram: remove usage of struct sunxi_ccm_reg [05/34] sunxi: clock: H6: remove struct sunxi_ccm_reg [06/34] sunxi: clock: H6: drop usage of struct sunxi_prcm_reg [07/34] sunxi: H6/H616: dram: remove usage of struct sunxi_prcm_reg [08/34] sunxi: clock: H6: remove struct sunxi_prcm_reg [09/34] sunxi: clock: H6: unify PLL control bit definitions [10/34] sunxi: clock: H6: factor out clock_set_pll() [11/34] sunxi: clock: H6: factor out H6/H616 CPU clock setup [12/34] sunxi: clock: H6: add A523 CPU PLL support [13/34] sunxi: spl: add support for Allwinner A523 watchdog [14/34] dt-bindings: add Allwinner A523 CCU bindings [15/34] clk: sunxi: Add support for the A523 CCU [16/34] clk: sunxi: Add support for the A523 -R CCU [17/34] pinctrl: sunxi: add Allwinner A523 pinctrl description [18/34] sunxi: mmc: add support for Allwinner A523 MMC mod clock [19/34] watchdog: sunxi: add A523 support [20/34] power: regulator: add AXP323 support [21/34] sunxi: update cpu_sunxi_ncat2.h [22/34] sunxi: Kconfig: consolidate SYS_CLK_FREQ selection [23/34] spl: reorder SPL_MAX_SIZE defaults for sunxi [24/34] sunxi: armv8: fel: move fel_stash variable to the front [25/34] sunxi: arm64: boot0.h: move fel_stash_addr variable to the front [26/34] sunxi: update rmr_switch.S source code [27/34] sunxi: armv8: FEL: save and restore GICv3 registers [28/34] sunxi: armv8: FEL: save and restore SP_IRQ [29/34] sunxi: sun50i_h6: add A523 SPL clock setup code [30/34] sunxi: A523: add DRAM initialisation routine [31/34] sunxi: A523: add DDR3 DRAM support [32/34] sunxi: add basic A523 support [33/34] sunxi: A523: add DT files from Linux v3 branch [34/34] sunxi: A523: add defconfigs for three boards

diff --git a/arch/arm/dts/sun55i-a523.dtsi b/arch/arm/dts/sun55i-a523.dtsi new file mode 100644 index 00000000000..ee485899ba0 --- /dev/null +++ b/arch/arm/dts/sun55i-a523.dtsi @@ -0,0 +1,598 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +// Copyright (C) 2023-2024 Arm Ltd. + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun6i-rtc.h> +#include <dt-bindings/clock/sun55i-a523-ccu.h> +#include <dt-bindings/clock/sun55i-a523-r-ccu.h> +#include <dt-bindings/reset/sun55i-a523-ccu.h> +#include <dt-bindings/reset/sun55i-a523-r-ccu.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a55"; + device_type = "cpu"; + reg = <0x000>; + enable-method = "psci"; + }; + + cpu1: cpu@100 { + compatible = "arm,cortex-a55"; + device_type = "cpu"; + reg = <0x100>; + enable-method = "psci"; + }; + + cpu2: cpu@200 { + compatible = "arm,cortex-a55"; + device_type = "cpu"; + reg = <0x200>; + enable-method = "psci"; + }; + + cpu3: cpu@300 { + compatible = "arm,cortex-a55"; + device_type = "cpu"; + reg = <0x300>; + enable-method = "psci"; + }; + + cpu4: cpu@400 { + compatible = "arm,cortex-a55"; + device_type = "cpu"; + reg = <0x400>; + enable-method = "psci"; + }; + + cpu5: cpu@500 { + compatible = "arm,cortex-a55"; + device_type = "cpu"; + reg = <0x500>; + enable-method = "psci"; + }; + + cpu6: cpu@600 { + compatible = "arm,cortex-a55"; + device_type = "cpu"; + reg = <0x600>; + enable-method = "psci"; + }; + + cpu7: cpu@700 { + compatible = "arm,cortex-a55"; + device_type = "cpu"; + reg = <0x700>; + enable-method = "psci"; + }; + }; + + osc24M: osc24M-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + arm,no-tick-in-suspend; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x40000000>; + + pio: pinctrl@2000000 { + compatible = "allwinner,sun55i-a523-pinctrl"; + reg = <0x2000000 0x800>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + mmc0_pins: mmc0-pins { + pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5"; + allwinner,pinmux = <2>; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + /omit-if-no-ref/ + mmc1_pins: mmc1-pins { + pins = "PG0" ,"PG1", "PG2", "PG3", "PG4", "PG5"; + allwinner,pinmux = <2>; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_pins: mmc2-pins { + pins = "PC0", "PC1" ,"PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", "PC13", "PC14", + "PC15", "PC16"; + allwinner,pinmux = <3>; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + uart0_pb_pins: uart0-pb-pins { + pins = "PB9", "PB10"; + allwinner,pinmux = <2>; + function = "uart0"; + }; + }; + + ccu: clock-controller@2001000 { + compatible = "allwinner,sun55i-a523-ccu"; + reg = <0x02001000 0x1000>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>, + <&rtc CLK_IOSC>, <&rtc CLK_OSC32K_FANOUT>; + clock-names = "hosc", "losc", + "iosc", "losc-fanout"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mmc0: mmc@4020000 { + compatible = "allwinner,sun55i-a523-mmc", + "allwinner,sun20i-d1-mmc"; + reg = <0x04020000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "disabled"; + + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@4021000 { + compatible = "allwinner,sun55i-a523-mmc", + "allwinner,sun20i-d1-mmc"; + reg = <0x04021000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + status = "disabled"; + + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@4022000 { + compatible = "allwinner,sun55i-a523-mmc", + "allwinner,sun20i-d1-mmc"; + reg = <0x04022000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + status = "disabled"; + + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + wdt: watchdog@2050000 { + compatible = "allwinner,sun55i-a523-wdt"; + reg = <0x2050000 0x20>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; + clock-names = "hosc", "losc"; + status = "okay"; + }; + + uart0: serial@2500000 { + compatible = "snps,dw-apb-uart"; + reg = <0x02500000 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + status = "disabled"; + }; + + uart1: serial@2500400 { + compatible = "snps,dw-apb-uart"; + reg = <0x02500400 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + + uart2: serial@2500800 { + compatible = "snps,dw-apb-uart"; + reg = <0x02500800 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@2500c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x02500c00 0x400>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@2501000 { + compatible = "snps,dw-apb-uart"; + reg = <0x02501000 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + + uart5: serial@2501400 { + compatible = "snps,dw-apb-uart"; + reg = <0x02501400 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART5>; + resets = <&ccu RST_BUS_UART5>; + status = "disabled"; + }; + + uart6: serial@2501800 { + compatible = "snps,dw-apb-uart"; + reg = <0x02501800 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART6>; + resets = <&ccu RST_BUS_UART6>; + status = "disabled"; + }; + + uart7: serial@2501c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x02501c00 0x400>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART7>; + resets = <&ccu RST_BUS_UART7>; + status = "disabled"; + }; + + i2c0: i2c@2502000 { + compatible = "allwinner,sun55i-a523-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x2502000 0x400>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@2502400 { + compatible = "allwinner,sun55i-a523-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x2502400 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@2502800 { + compatible = "allwinner,sun55i-a523-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x2502800 0x400>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@2502c00 { + compatible = "allwinner,sun55i-a523-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x2502c00 0x400>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c4: i2c@2503000 { + compatible = "allwinner,sun55i-a523-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x2503000 0x400>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C4>; + resets = <&ccu RST_BUS_I2C4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c5: i2c@2503400 { + compatible = "allwinner,sun55i-a523-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x2503400 0x400>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C5>; + resets = <&ccu RST_BUS_I2C5>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@3400000 { + compatible = "arm,gic-v3"; + #address-cells = <1>; + #interrupt-cells = <3>; + #size-cells = <1>; + ranges; + interrupt-controller; + reg = <0x3400000 0x10000>, + <0x3460000 0x100000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + dma-noncoherent; + + its: msi-controller@3440000 { + compatible = "arm,gic-v3-its"; + reg = <0x3440000 0x20000>; + msi-controller; + #msi-cells = <1>; + dma-noncoherent; + }; + }; + + usb_otg: usb@4100000 { + compatible = "allwinner,sun55i-a523-musb", + "allwinner,sun8i-a33-musb"; + reg = <0x4100000 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + extcon = <&usbphy 0>; + phys = <&usbphy 0>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: phy@4100400 { + compatible = "allwinner,sun55i-a523-usb-phy", + "allwinner,sun20i-d1-usb-phy"; + reg = <0x4100400 0x100>, + <0x4101800 0x100>, + <0x4200800 0x100>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1"; + clocks = <&osc24M>, + <&osc24M>; + clock-names = "usb0_phy", + "usb1_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>; + reset-names = "usb0_reset", + "usb1_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci0: usb@4101000 { + compatible = "allwinner,sun55i-a523-ehci", + "generic-ehci"; + reg = <0x4101000 0x100>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_BUS_EHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>, + <&ccu RST_BUS_EHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@4101400 { + compatible = "allwinner,sun55i-a523-ohci", + "generic-ohci"; + reg = <0x4101400 0x100>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci1: usb@4200000 { + compatible = "allwinner,sun55i-a523-ehci", + "generic-ehci"; + reg = <0x4200000 0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_BUS_EHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_OHCI1>, + <&ccu RST_BUS_EHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@4200400 { + compatible = "allwinner,sun55i-a523-ohci", + "generic-ohci"; + reg = <0x4200400 0x100>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_OHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + r_ccu: clock-controller@7010000 { + compatible = "allwinner,sun55i-a523-r-ccu"; + reg = <0x7010000 0x250>; + clocks = <&osc24M>, + <&rtc CLK_OSC32K>, + <&rtc CLK_IOSC>, + <&ccu CLK_PLL_PERIPH0_200M>, + <&ccu CLK_PLL_AUDIO0_4X>; + clock-names = "hosc", + "losc", + "iosc", + "pll-periph", + "pll-audio"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + nmi_intc: interrupt-controller@7010320 { + compatible = "allwinner,sun55i-a523-nmi"; + reg = <0x07010320 0xc>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + }; + + r_pio: pinctrl@7022000 { + compatible = "allwinner,sun55i-a523-r-pinctrl"; + reg = <0x7022000 0x800>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB0>, + <&osc24M>, + <&rtc CLK_OSC32K>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + r_i2c_pins: r-i2c-pins { + pins = "PL0" ,"PL1"; + allwinner,pinmux = <2>; + function = "r_i2c0"; + }; + }; + + r_i2c0: i2c@7081400 { + compatible = "allwinner,sun55i-a523-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x07081400 0x400>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_BUS_R_I2C0>; + resets = <&r_ccu RST_BUS_R_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + rtc: rtc@7090000 { + compatible = "allwinner,sun55i-a523-rtc", + "allwinner,sun50i-r329-rtc"; + reg = <0x7090000 0x400>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_BUS_R_RTC>, + <&osc24M>, + <&r_ccu CLK_R_AHB>; + clock-names = "bus", "hosc", "ahb"; + #clock-cells = <1>; + }; + }; +}; diff --git a/arch/arm/dts/sun55i-a527-radxa-a5e.dts b/arch/arm/dts/sun55i-a527-radxa-a5e.dts new file mode 100644 index 00000000000..912e1bda974 --- /dev/null +++ b/arch/arm/dts/sun55i-a527-radxa-a5e.dts @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +// Copyright (C) 2025 Arm Ltd. + +/dts-v1/; + +#include "sun55i-a523.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Radxa A5E"; + compatible = "radxa,cubie-a5e", "allwinner,sun55i-a527"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_osc32k: ext-osc32k-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply from the USB-C connector */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_vbus: vbus { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&reg_vcc5v>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <&reg_cldo3>; + cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_DOWN)>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <&reg_cldo3>; /* via VCC-IO */ + vcc-pc-supply = <&reg_cldo1>; + vcc-pd-supply = <&reg_cldo3>; + vcc-pe-supply = <&reg_aldo2>; + vcc-pf-supply = <&reg_cldo3>; /* actually switchable */ + vcc-pg-supply = <&reg_bldo1>; + vcc-ph-supply = <&reg_cldo3>; /* via VCC-IO */ + vcc-pi-supply = <&reg_cldo3>; + vcc-pj-supply = <&reg_cldo4>; + vcc-pk-supply = <&reg_cldo1>; +}; + +&r_i2c0 { + status = "okay"; + + axp717: pmic@34 { + compatible = "x-powers,axp717"; + reg = <0x34>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + vin1-supply = <&reg_vcc5v>; + vin2-supply = <&reg_vcc5v>; + vin3-supply = <&reg_vcc5v>; + vin4-supply = <&reg_vcc5v>; + aldoin-supply = <&reg_vcc5v>; + bldoin-supply = <&reg_vcc5v>; + cldoin-supply = <&reg_vcc5v>; + + regulators { + /* Supplies the "little" cluster (1.4 GHz cores) */ + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpul"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-dram"; + }; + + reg_aldo1: aldo1 { + /* not connected */ + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pe"; + }; + + reg_aldo3: aldo3 { + /* supplies the I2C pins for this PMIC */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl-usb"; + }; + + reg_aldo4: aldo4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pll-dxco-avcc"; + }; + + reg_bldo1: bldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pg-iowifi"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pm-lpddr4"; + }; + + reg_bldo3: bldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-mipi-cam"; + }; + + reg_bldo4: bldo4 { + /* not connected */ + }; + + reg_cldo1: cldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pc-and-their-dog"; + }; + + reg_cldo2: cldo2 { + /* not connected */ + }; + + reg_cldo3: cldo3 { + /* IO, USB-2, 3V3, card, NAND, sensor, PI */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-io-mmc-spi-ana"; + }; + + reg_cldo4: cldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pj-phy"; + }; + + reg_cpusldo: cpusldo { + /* supplies the management core */ + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-cpus"; + }; + }; + }; + + axp323: pmic@36 { + compatible = "x-powers,axp323"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + + vin1-supply = <&reg_vcc5v>; + vin2-supply = <&reg_vcc5v>; + vin3-supply = <&reg_vcc5v>; + + regulators { + aldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-mipi-dsi"; + }; + + dldo1 { + /* not connected */ + }; + + /* Supplies the "big" cluster (1.8 GHz cores) */ + reg_dcdc1_323: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpub"; + }; + + /* DCDC2 is polyphased with DCDC1 */ + + /* RISC-V management core supply */ + reg_dcdc3_323: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-dnr"; + }; + }; + }; +}; + +&r_pio { +/* + * Specifying the supply would create a circular dependency. + * + * vcc-pl-supply = <&reg_aldo3>; + */ + vcc-pm-supply = <&reg_aldo3>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + /* + * The USB-C port is the primary power supply, so in this configuration + * relies on the other end of the USB cable to supply the VBUS power. + * So use this port in peripheral mode. + * It is possible to supply the board with the 5V pins on the GPIO + * header, and since the DCIN_5V line is hardwired to the USB-C VBUS + * pins, the port turns into a host port, unconditionally supplying + * power. The dr_mode property should be changed to "host" here, if + * users choose this setup. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +/* + * The schematic describes USB0_ID (PL10), measuring VBUS_5V, which looks to + * be always on. Also there is USB-VBUSDET (PL2), which is measuring the same + * VBUS_5V. There is also DCIN_DET, which measures DCIN_5V, so the power + * input rail. + * None of them seem to make any sense in relation to detecting USB devices + * or whether there is power provided via any USB pins: they would always + * report high, otherwise the system wouldn't be running. + * The AXP717C provides proper USB-C CC pin functionality, but the PMIC is + * not connected to those pins of the USB-C connector. + */ +&usbphy { + usb0_vbus-supply = <&reg_vcc5v>; + usb1_vbus-supply = <&reg_usb_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun55i-h728-x96qpro+.dts b/arch/arm/dts/sun55i-h728-x96qpro+.dts new file mode 100644 index 00000000000..c0bce3f4fa9 --- /dev/null +++ b/arch/arm/dts/sun55i-h728-x96qpro+.dts @@ -0,0 +1,287 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +// Copyright (C) 2024 Arm Ltd. + +/dts-v1/; + +#include "sun55i-a523.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "X96Q Pro+"; + compatible = "amediatech,x96q-pro-plus", "allwinner,sun55i-h728"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_osc32k: ext-osc32k-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply from the barrel plug */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_vcc3v3: vcc3v3 { + /* 3.3V dummy supply for the SD card */ + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&reg_vcc5v>; + regulator-always-on; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <&reg_vcc3v3>; + cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_DOWN)>; /* PF6 */ + bus-width = <4>; + disable-wp; + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <&reg_cldo3>; + vqmmc-supply = <&reg_cldo1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <&reg_cldo3>; /* via VCC-IO */ + vcc-pc-supply = <&reg_cldo1>; + vcc-pd-supply = <&reg_dcdc4>; + vcc-pe-supply = <&reg_dcdc4>; + vcc-pf-supply = <&reg_cldo3>; /* actually switchable */ + vcc-pg-supply = <&reg_bldo1>; + vcc-ph-supply = <&reg_cldo3>; /* via VCC-IO */ + vcc-pi-supply = <&reg_dcdc4>; + vcc-pj-supply = <&reg_dcdc4>; + vcc-pk-supply = <&reg_bldo3>; +}; + +&r_i2c0 { + status = "okay"; + + axp717: pmic@34 { + compatible = "x-powers,axp717"; + reg = <0x34>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + vin1-supply = <&reg_vcc5v>; + vin2-supply = <&reg_vcc5v>; + vin3-supply = <&reg_vcc5v>; + vin4-supply = <&reg_vcc5v>; + aldoin-supply = <&reg_vcc5v>; + bldoin-supply = <&reg_vcc5v>; + cldoin-supply = <&reg_vcc5v>; + + regulators { + /* Supplies the "little" cluster (1.0(?) GHz cores) */ + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpul"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; + regulator-name = "vdd-dram"; + }; + + reg_dcdc4: dcdc4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd-dcdc4"; + }; + + reg_aldo1: aldo1 { + /* not connected */ + }; + + reg_aldo2: aldo2 { + /* not connected */ + }; + + reg_aldo3: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-aldo3"; + }; + + reg_aldo4: aldo4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pll-dxco-avcc"; + }; + + reg_bldo1: bldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pg-wifi-lvds"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dram-1v8"; + }; + + reg_bldo3: bldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-bldo3"; + }; + + reg_bldo4: bldo4 { + /* not connected */ + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-codec-sd"; + }; + + reg_cldo2: cldo2 { + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-codec-eth-sd"; + }; + + reg_cldo4: cldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-eth-phy"; + }; + + reg_cpusldo: cpusldo { + /* supplies the management core */ + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-cpus"; + }; + }; + }; + + axp323: pmic@36 { + compatible = "x-powers,axp323"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + + vin1-supply = <&reg_vcc5v>; + vin2-supply = <&reg_vcc5v>; + vin3-supply = <&reg_vcc5v>; + + regulators { + aldo1 { + /* not connected */ + }; + + dldo1 { + /* not connected */ + }; + + /* Supplies the "big" cluster (1.8 GHz cores) */ + reg_dcdc1_323: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpub"; + }; + + /* DCDC2 is polyphased with DCDC1 */ + + reg_dcdc3_323: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-name = "vdd-dcdc3"; + }; + }; + }; +}; + +&r_pio { +/* + * Specifying the supply would create a circular dependency. + * + * vcc-pl-supply = <&reg_aldo3>; + */ + vcc-pm-supply = <&reg_aldo3>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + /* USB0 is a USB-A receptacle, always powered, so force host mode. */ + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/dts/sun55i-t527-avaota-a1.dts b/arch/arm/dts/sun55i-t527-avaota-a1.dts new file mode 100644 index 00000000000..85a546aecdb --- /dev/null +++ b/arch/arm/dts/sun55i-t527-avaota-a1.dts @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +// Copyright (C) 2024 Arm Ltd. + +/dts-v1/; + +#include "sun55i-a523.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Avaota A1"; + compatible = "yuzukihd,avaota-a1", "allwinner,sun55i-t527"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_osc32k: ext-osc32k-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + + reg_vcc12v: vcc12v { + /* DC input jack */ + compatible = "regulator-fixed"; + regulator-name = "vcc-12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply from the 12V->5V regulator */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&reg_vcc12v>; + regulator-always-on; + }; + + reg_usb_vbus: vbus { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&reg_vcc5v>; + gpio = <&pio 8 12 GPIO_ACTIVE_HIGH>; /* PI12 */ + enable-active-high; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <&reg_cldo3>; + cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_DOWN)>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + bus-width = <8>; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&reg_cldo3>; + vqmmc-supply = <&reg_cldo1>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <&reg_cldo3>; /* via VCC-IO */ + vcc-pc-supply = <&reg_cldo1>; + vcc-pd-supply = <&reg_dcdc4>; + vcc-pe-supply = <&reg_dcdc4>; + vcc-pf-supply = <&reg_cldo3>; /* actually switchable */ + vcc-pg-supply = <&reg_bldo1>; + vcc-ph-supply = <&reg_cldo3>; /* via VCC-IO */ + vcc-pi-supply = <&reg_dcdc4>; + vcc-pj-supply = <&reg_dcdc4>; + vcc-pk-supply = <&reg_bldo3>; +}; + +&r_i2c0 { + status = "okay"; + + axp717: pmic@35 { + compatible = "x-powers,axp717"; + reg = <0x35>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + vin1-supply = <&reg_vcc5v>; + vin2-supply = <&reg_vcc5v>; + vin3-supply = <&reg_vcc5v>; + vin4-supply = <&reg_vcc5v>; + aldoin-supply = <&reg_vcc5v>; + bldoin-supply = <&reg_vcc5v>; + cldoin-supply = <&reg_vcc5v>; + + regulators { + /* Supplies the "little" cluster (1.4 GHz cores) */ + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpul"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1160000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-dram"; + }; + + reg_dcdc4: dcdc4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vdd-io"; + }; + + reg_aldo1: aldo1 { + /* not connected */ + }; + + reg_aldo2: aldo2 { + /* not connected */ + }; + + reg_aldo3: aldo3 { + /* supplies the I2C pins for this PMIC */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl-pm"; + }; + + reg_aldo4: aldo4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pll-dxco-avcc"; + }; + + reg_bldo1: bldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pg-wifi-lvds"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dram-1v8"; + }; + + reg_bldo3: bldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-cvp-pk-vid1v8"; + }; + + reg_bldo4: bldo4 { + /* not connected */ + }; + + reg_cldo1: cldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pc"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-io-mmc-spi-ana"; + }; + + reg_cldo4: cldo4 { + /* not connected */ + }; + + reg_cpusldo: cpusldo { + /* supplies the management core */ + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-cpus"; + }; + }; + }; + + axp323: pmic@36 { + compatible = "x-powers,axp323"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + + vin1-supply = <&reg_vcc5v>; + vin2-supply = <&reg_vcc5v>; + vin3-supply = <&reg_vcc5v>; + + regulators { + aldo1 { + /* not connected */ + }; + + dldo1 { + /* not connected */ + }; + + /* Supplies the "big" cluster (1.8 GHz cores) */ + reg_dcdc1_323: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpub"; + }; + + /* DCDC2 is polyphased with DCDC1 */ + + /* Some RISC-V management core related voltage */ + reg_dcdc3_323: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-dnr"; + }; + }; + }; +}; + +&r_pio { +/* + * Specifying the supply would create a circular dependency. + * + * vcc-pl-supply = <&reg_aldo3>; + */ + vcc-pm-supply = <&reg_aldo3>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + /* + * The CC pins of the USB-C port have two pull-down resistors + * connected to GND, which fixes this port to a peripheral role. + * There is a regulator, controlled by a GPIO, to provide VBUS power + * to the port, and a VBUSDET GPIO, to detect externally provided + * power, but without the CC pins there is no real way to do a + * runtime role detection. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <&reg_usb_vbus>; + usb0_vbus_det-gpios = <&pio 8 13 GPIO_ACTIVE_HIGH>; /* PI13 */ + status = "okay"; +};

[33/34] sunxi: A523: add DT files from Linux v3 branch

Commit Message

Comments

Patch