| Message ID | 20240504194346.2462489-10-jonas@kwiboo.se |
|---|---|
| State | Accepted |
| Delegated to: | Kever Yang |
| Headers | show |
| Series | rockchip: Migrate RK3308, RK3328, RK356x and RK3588 to OF_UPSTREAM | expand |
On Sat, May 04, 2024 at 07:43:01PM +0000, Jonas Karlman wrote: > Remove redundant device tree files now that RK356x boards have been > migrated to use OF_UPSTREAM. > > Signed-off-by: Jonas Karlman <jonas@kwiboo.se> > --- > arch/arm/dts/rk3566-anbernic-rgxx3.dtsi | 788 ------ > arch/arm/dts/rk3566-quartz64-a.dts | 838 ------ > arch/arm/dts/rk3566-quartz64-b.dts | 737 ----- > arch/arm/dts/rk3566-radxa-cm3-io.dts | 281 -- > arch/arm/dts/rk3566-radxa-cm3.dtsi | 425 --- > arch/arm/dts/rk3566-soquartz-blade.dts | 198 -- > arch/arm/dts/rk3566-soquartz-cm4.dts | 196 -- > arch/arm/dts/rk3566-soquartz-model-a.dts | 236 -- > arch/arm/dts/rk3566-soquartz.dtsi | 684 ----- > arch/arm/dts/rk3566.dtsi | 35 - > arch/arm/dts/rk3568-bpi-r2-pro.dts | 852 ------ > arch/arm/dts/rk3568-evb.dts | 689 ----- > arch/arm/dts/rk3568-lubancat-2.dts | 730 ----- > arch/arm/dts/rk3568-nanopi-r5c.dts | 112 - > arch/arm/dts/rk3568-nanopi-r5s.dts | 136 - > arch/arm/dts/rk3568-nanopi-r5s.dtsi | 587 ---- > arch/arm/dts/rk3568-odroid-m1.dts | 741 ----- > arch/arm/dts/rk3568-pinctrl.dtsi | 3214 ---------------------- > arch/arm/dts/rk3568-radxa-cm3i.dtsi | 412 --- > arch/arm/dts/rk3568-radxa-e25.dts | 236 -- > arch/arm/dts/rk3568-rock-3a.dts | 859 ------ > arch/arm/dts/rk3568.dtsi | 267 -- > arch/arm/dts/rk356x.dtsi | 1886 ------------- > include/dt-bindings/clock/rk3568-cru.h | 926 ------- > include/dt-bindings/power/rk3568-power.h | 32 - > 25 files changed, 16097 deletions(-) > delete mode 100644 arch/arm/dts/rk3566-anbernic-rgxx3.dtsi > delete mode 100644 arch/arm/dts/rk3566-quartz64-a.dts > delete mode 100644 arch/arm/dts/rk3566-quartz64-b.dts > delete mode 100644 arch/arm/dts/rk3566-radxa-cm3-io.dts > delete mode 100644 arch/arm/dts/rk3566-radxa-cm3.dtsi > delete mode 100644 arch/arm/dts/rk3566-soquartz-blade.dts > delete mode 100644 arch/arm/dts/rk3566-soquartz-cm4.dts > delete mode 100644 arch/arm/dts/rk3566-soquartz-model-a.dts > delete mode 100644 arch/arm/dts/rk3566-soquartz.dtsi > delete mode 100644 arch/arm/dts/rk3566.dtsi > delete mode 100644 arch/arm/dts/rk3568-bpi-r2-pro.dts > delete mode 100644 arch/arm/dts/rk3568-evb.dts > delete mode 100644 arch/arm/dts/rk3568-lubancat-2.dts > delete mode 100644 arch/arm/dts/rk3568-nanopi-r5c.dts > delete mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dts > delete mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dtsi > delete mode 100644 arch/arm/dts/rk3568-odroid-m1.dts > delete mode 100644 arch/arm/dts/rk3568-pinctrl.dtsi > delete mode 100644 arch/arm/dts/rk3568-radxa-cm3i.dtsi > delete mode 100644 arch/arm/dts/rk3568-radxa-e25.dts > delete mode 100644 arch/arm/dts/rk3568-rock-3a.dts > delete mode 100644 arch/arm/dts/rk3568.dtsi > delete mode 100644 arch/arm/dts/rk356x.dtsi > delete mode 100644 include/dt-bindings/clock/rk3568-cru.h > delete mode 100644 include/dt-bindings/power/rk3568-power.h > > diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi b/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi > deleted file mode 100644 Can we remove this since a non-upstream device tree depends on it? Thank you, Chris > index 8cbf3d9a4f22..000000000000 > --- a/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi > +++ /dev/null > @@ -1,788 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/input/linux-event-codes.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3566.dtsi" > - > -/ { > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - adc-joystick { > - compatible = "adc-joystick"; > - io-channels = <&adc_mux 0>, > - <&adc_mux 1>, > - <&adc_mux 2>, > - <&adc_mux 3>; > - pinctrl-0 = <&joy_mux_en>; > - pinctrl-names = "default"; > - poll-interval = <60>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - axis@0 { > - reg = <0>; > - abs-flat = <32>; > - abs-fuzz = <32>; > - abs-range = <1023 15>; > - linux,code = <ABS_X>; > - }; > - > - axis@1 { > - reg = <1>; > - abs-flat = <32>; > - abs-fuzz = <32>; > - abs-range = <15 1023>; > - linux,code = <ABS_RX>; > - }; > - > - axis@2 { > - reg = <2>; > - abs-flat = <32>; > - abs-fuzz = <32>; > - abs-range = <15 1023>; > - linux,code = <ABS_Y>; > - }; > - > - axis@3 { > - reg = <3>; > - abs-flat = <32>; > - abs-fuzz = <32>; > - abs-range = <1023 15>; > - linux,code = <ABS_RY>; > - }; > - }; > - > - adc_keys: adc-keys { > - compatible = "adc-keys"; > - io-channels = <&saradc 0>; > - io-channel-names = "buttons"; > - keyup-threshold-microvolt = <1800000>; > - poll-interval = <60>; > - > - /* > - * Button is mapped to F key in BSP kernel, but > - * according to input guidelines it should be mode. > - */ > - button-mode { > - label = "MODE"; > - linux,code = <BTN_MODE>; > - press-threshold-microvolt = <1750>; > - }; > - }; > - > - adc_mux: adc-mux { > - compatible = "io-channel-mux"; > - channels = "left_x", "right_x", "left_y", "right_y"; > - #io-channel-cells = <1>; > - io-channels = <&saradc 3>; > - io-channel-names = "parent"; > - mux-controls = <&gpio_mux>; > - settle-time-us = <100>; > - }; > - > - gpio_keys_control: gpio-keys-control { > - compatible = "gpio-keys"; > - pinctrl-0 = <&btn_pins_ctrl>; > - pinctrl-names = "default"; > - > - button-b { > - gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>; > - label = "SOUTH"; > - linux,code = <BTN_SOUTH>; > - }; > - > - button-down { > - gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; > - label = "DPAD-DOWN"; > - linux,code = <BTN_DPAD_DOWN>; > - }; > - > - button-l1 { > - gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; > - label = "TL"; > - linux,code = <BTN_TL>; > - }; > - > - button-l2 { > - gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; > - label = "TL2"; > - linux,code = <BTN_TL2>; > - }; > - > - button-select { > - gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; > - label = "SELECT"; > - linux,code = <BTN_SELECT>; > - }; > - > - button-start { > - gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>; > - label = "START"; > - linux,code = <BTN_START>; > - }; > - > - button-thumbl { > - gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; > - label = "THUMBL"; > - linux,code = <BTN_THUMBL>; > - }; > - > - button-thumbr { > - gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; > - label = "THUMBR"; > - linux,code = <BTN_THUMBR>; > - }; > - > - button-up { > - gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; > - label = "DPAD-UP"; > - linux,code = <BTN_DPAD_UP>; > - }; > - > - button-x { > - gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; > - label = "NORTH"; > - linux,code = <BTN_NORTH>; > - }; > - }; > - > - gpio_keys_vol: gpio-keys-vol { > - compatible = "gpio-keys"; > - autorepeat; > - pinctrl-0 = <&btn_pins_vol>; > - pinctrl-names = "default"; > - > - button-vol-down { > - gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; > - label = "VOLUMEDOWN"; > - linux,code = <KEY_VOLUMEDOWN>; > - }; > - > - button-vol-up { > - gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; > - label = "VOLUMEUP"; > - linux,code = <KEY_VOLUMEUP>; > - }; > - }; > - > - gpio_mux: mux-controller { > - compatible = "gpio-mux"; > - mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>, > - <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; > - #mux-control-cells = <0>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - ddc-i2c-bus = <&i2c5>; > - type = "c"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - leds: pwm-leds { > - compatible = "pwm-leds"; > - > - green_led: led-0 { > - color = <LED_COLOR_ID_GREEN>; > - default-state = "on"; > - function = LED_FUNCTION_POWER; > - max-brightness = <255>; > - pwms = <&pwm6 0 25000 0>; > - }; > - > - amber_led: led-1 { > - color = <LED_COLOR_ID_AMBER>; > - function = LED_FUNCTION_CHARGING; > - max-brightness = <255>; > - pwms = <&pwm7 0 25000 0>; > - }; > - > - red_led: led-2 { > - color = <LED_COLOR_ID_RED>; > - default-state = "off"; > - function = LED_FUNCTION_STATUS; > - max-brightness = <255>; > - pwms = <&pwm0 0 25000 0>; > - }; > - }; > - > - sdio_pwrseq: sdio-pwrseq { > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk817 1>; > - clock-names = "ext_clock"; > - pinctrl-0 = <&wifi_enable_h>; > - pinctrl-names = "default"; > - post-power-on-delay-ms = <200>; > - reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; > - }; > - > - vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 { > - compatible = "regulator-fixed"; > - gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; > - enable-active-high; > - pinctrl-0 = <&vcc_lcd_h>; > - pinctrl-names = "default"; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vcc3v3_lcd0_n"; > - vin-supply = <&vcc_3v3>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_sys: regulator-vcc-sys { > - compatible = "regulator-fixed"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3800000>; > - regulator-max-microvolt = <3800000>; > - regulator-name = "vcc_sys"; > - }; > - > - vcc_wifi: regulator-vcc-wifi { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; > - pinctrl-0 = <&vcc_wifi_h>; > - pinctrl-names = "default"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vcc_wifi"; > - }; > - > - vibrator: pwm-vibrator { > - compatible = "pwm-vibrator"; > - pwm-names = "enable"; > - pwms = <&pwm5 0 1000000000 0>; > - }; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - ddc-i2c-bus = <&i2c5>; > - pinctrl-0 = <&hdmitxm0_cec>; > - pinctrl-names = "default"; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - rk817: pmic@20 { > - compatible = "rockchip,rk817"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - clock-output-names = "rk808-clkout1", "rk808-clkout2"; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - #clock-cells = <1>; > - #sound-dai-cells = <0>; > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>; > - wakeup-source; > - > - vcc1-supply = <&vcc_sys>; > - vcc2-supply = <&vcc_sys>; > - vcc3-supply = <&vcc_sys>; > - vcc4-supply = <&vcc_sys>; > - vcc5-supply = <&vcc_sys>; > - vcc6-supply = <&vcc_sys>; > - vcc7-supply = <&vcc_sys>; > - vcc8-supply = <&vcc_sys>; > - vcc9-supply = <&dcdc_boost>; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vdd_logic"; > - regulator-state-mem { > - regulator-off-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vdd_gpu"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-name = "vcc_ddr"; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vcc_3v3: DCDC_REG4 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vcc_3v3"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG1 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcca1v8_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda_0v9"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda0v9_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vccio_acodec"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vccio_sd"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vcc3v3_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcc_1v8: LDO_REG7 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcc_1v8"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc1v8_dvp: LDO_REG8 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vcc1v8_dvp"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc2v8_dvp: LDO_REG9 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - regulator-name = "vcc2v8_dvp"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - dcdc_boost: BOOST { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <4700000>; > - regulator-max-microvolt = <5400000>; > - regulator-name = "boost"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - otg_switch: OTG_SWITCH { > - regulator-name = "otg_switch"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > - > - vdd_cpu: regulator@40 { > - compatible = "fcs,fan53555"; > - reg = <0x40>; > - fcs,suspend-voltage-selector = <1>; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <712500>; > - regulator-max-microvolt = <1390000>; > - regulator-name = "vdd_cpu"; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc_sys>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > -}; > - > -&i2c1 { > - /* Unknown/unused device at 0x3c */ > - status = "disabled"; > -}; > - > -&i2c5 { > - pinctrl-0 = <&i2c5m1_xfer>; > - pinctrl-names = "default"; > - status = "okay"; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&i2s1_8ch { > - pinctrl-0 = <&i2s1m0_sclktx > - &i2s1m0_lrcktx > - &i2s1m0_sdi0 > - &i2s1m0_sdo0>; > - pinctrl-names = "default"; > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&pinctrl { > - gpio-btns { > - btn_pins_ctrl: btn-pins-ctrl { > - rockchip,pins = > - <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - > - btn_pins_vol: btn-pins-vol { > - rockchip,pins = > - <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - joy-mux { > - joy_mux_en: joy-mux-en { > - rockchip,pins = > - <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = > - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - sdio-pwrseq { > - wifi_enable_h: wifi-enable-h { > - rockchip,pins = > - <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - vcc3v3-lcd { > - vcc_lcd_h: vcc-lcd-h { > - rockchip,pins = > - <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - vcc-wifi { > - vcc_wifi_h: vcc-wifi-h { > - rockchip,pins = > - <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - status = "okay"; > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc1v8_dvp>; > - vccio7-supply = <&vcc_3v3>; > -}; > - > -&pwm0 { > - pinctrl-0 = <&pwm0m1_pins>; > - pinctrl-names = "default"; > - status = "okay"; > -}; > - > -&pwm5 { > - status = "okay"; > -}; > - > -&pwm6 { > - status = "okay"; > -}; > - > -&pwm7 { > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - pinctrl-names = "default"; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&sdmmc1 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>; > - pinctrl-names = "default"; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc1v8_dvp>; > - status = "okay"; > -}; > - > -&sdmmc2 { > - bus-width = <4>; > - cap-sd-highspeed; > - cap-sdio-irq; > - keep-power-in-suspend; > - mmc-pwrseq = <&sdio_pwrseq>; > - non-removable; > - pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; > - pinctrl-names = "default"; > - vmmc-supply = <&vcc_wifi>; > - vqmmc-supply = <&vcca1v8_pmu>; > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart1 { > - pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>; > - pinctrl-names = "default"; > - uart-has-rtscts; > - status = "okay"; > - > - bluetooth { > - compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; > - device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; > - enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; > - host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; > - }; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -/* > - * Lack the schematics to verify, but port works as a peripheral > - * (and not a host or OTG port). > - */ > -&usb_host0_xhci { > - dr_mode = "peripheral"; > - phys = <&usb2phy0_otg>; > - phy-names = "usb2-phy"; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - phy-names = "usb2-phy", "usb3-phy"; > - phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>; > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3566-quartz64-a.dts b/arch/arm/dts/rk3566-quartz64-a.dts > deleted file mode 100644 > index 59843a7a199c..000000000000 > --- a/arch/arm/dts/rk3566-quartz64-a.dts > +++ /dev/null > @@ -1,838 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3566.dtsi" > - > -/ { > - model = "Pine64 RK3566 Quartz64-A Board"; > - compatible = "pine64,quartz64-a", "rockchip,rk3566"; > - > - aliases { > - ethernet0 = &gmac1; > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - gmac1_clkin: external-gmac1-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "gmac1_clkin"; > - #clock-cells = <0>; > - }; > - > - fan: gpio_fan { > - compatible = "gpio-fan"; > - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; > - gpio-fan,speed-map = > - < 0 0>, > - <4500 1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&fan_en_h>; > - #cooling-cells = <2>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led-work { > - label = "work-led"; > - default-state = "off"; > - gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&work_led_enable_h>; > - retain-state-suspended; > - }; > - > - led-diy { > - label = "diy-led"; > - default-state = "on"; > - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&diy_led_enable_h>; > - retain-state-suspended; > - }; > - }; > - > - rk817-sound { > - compatible = "simple-audio-card"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,name = "Analog RK817"; > - simple-audio-card,mclk-fs = <256>; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s1_8ch>; > - }; > - > - simple-audio-card,codec { > - sound-dai = <&rk817>; > - }; > - }; > - > - sdio_pwrseq: sdio-pwrseq { > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk817 1>; > - clock-names = "ext_clock"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_enable_h>; > - post-power-on-delay-ms = <100>; > - power-off-delay-us = <5000000>; > - reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; > - }; > - > - spdif_dit: spdif-dit { > - compatible = "linux,spdif-dit"; > - #sound-dai-cells = <0>; > - }; > - > - spdif_sound: spdif-sound { > - compatible = "simple-audio-card"; > - simple-audio-card,name = "SPDIF"; > - > - simple-audio-card,cpu { > - sound-dai = <&spdif>; > - }; > - > - simple-audio-card,codec { > - sound-dai = <&spdif_dit>; > - }; > - }; > - > - vcc12v_dcin: vcc12v_dcin { > - compatible = "regulator-fixed"; > - regulator-name = "vcc12v_dcin"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - /* vbus feeds the rk817 usb input. > - * With no battery attached, also feeds vcc_bat+ > - * via ON/OFF_BAT jumper > - */ > - vbus: vbus { > - compatible = "regulator-fixed"; > - regulator-name = "vbus"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_enable_h>; > - regulator-name = "vcc3v3_pcie_p"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc_3v3>; > - }; > - > - vcc5v0_usb: vcc5v0_usb { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - /* all four ports are controlled by one gpio > - * the host ports are sourced from vcc5v0_usb > - * the otg port is sourced from vcc5v0_midu > - */ > - vcc5v0_usb20_host: vcc5v0_usb20_host { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb20_host_en>; > - regulator-name = "vcc5v0_usb20_host"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb20_otg: vcc5v0_usb20_otg { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; > - regulator-name = "vcc5v0_usb20_otg"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dcdc_boost>; > - }; > - > - vcc3v3_sd: vcc3v3_sd { > - compatible = "regulator-fixed"; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc_sd_h>; > - regulator-boot-on; > - regulator-name = "vcc3v3_sd"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc_3v3>; > - }; > - > - /* sourced from vbus and vcc_bat+ via rk817 sw5 */ > - vcc_sys: vcc_sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <4400000>; > - regulator-max-microvolt = <4400000>; > - vin-supply = <&vbus>; > - }; > - > - /* sourced from vcc_sys, sdio module operates internally at 3.3v */ > - vcc_wl: vcc_wl { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_wl"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc_sys>; > - }; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&combphy2 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu_thermal { > - trips { > - cpu_hot: cpu_hot { > - temperature = <55000>; > - hysteresis = <2000>; > - type = "active"; > - }; > - }; > - > - cooling-maps { > - map1 { > - trip = <&cpu_hot>; > - cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; > - clock_in_out = "input"; > - phy-supply = <&vcc_3v3>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m0_miim > - &gmac1m0_tx_bus2 > - &gmac1m0_rx_bus2 > - &gmac1m0_rgmii_clk > - &gmac1m0_clkinout > - &gmac1m0_rgmii_bus>; > - snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - tx_delay = <0x30>; > - rx_delay = <0x10>; > - phy-handle = <&rgmii_phy1>; > - status = "okay"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda_0v9>; > - avdd-1v8-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk817: pmic@20 { > - compatible = "rockchip,rk817"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - clock-output-names = "rk808-clkout1", "rk808-clkout2"; > - #clock-cells = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; > - rockchip,system-power-controller; > - #sound-dai-cells = <0>; > - wakeup-source; > - > - vcc1-supply = <&vcc_sys>; > - vcc2-supply = <&vcc_sys>; > - vcc3-supply = <&vcc_sys>; > - vcc4-supply = <&vcc_sys>; > - vcc5-supply = <&vcc_sys>; > - vcc6-supply = <&vcc_sys>; > - vcc7-supply = <&vcc_sys>; > - vcc8-supply = <&vcc_sys>; > - vcc9-supply = <&dcdc_boost>; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vdd_logic"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vdd_gpu"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-name = "vcc_ddr"; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vcc_3v3: DCDC_REG4 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vcc_3v3"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG1 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcca1v8_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda_0v9"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda0v9_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vccio_acodec"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vccio_sd"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vcc3v3_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcc_1v8: LDO_REG7 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcc_1v8"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc1v8_dvp: LDO_REG8 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcc1v8_dvp"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc2v8_dvp: LDO_REG9 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - regulator-name = "vcc2v8_dvp"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - dcdc_boost: BOOST { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - regulator-name = "boost"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - otg_switch: OTG_SWITCH { > - regulator-name = "otg_switch"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > -}; > - > -/* i2c3 is exposed on con40 > - * pin 3 - i2c3_sda_m0, pullup to vcc_3v3 > - * pin 5 - i2c3_scl_m0, pullup to vcc_3v3 > - */ > -&i2c3 { > - status = "okay"; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&i2s1_8ch { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s1m0_sclktx > - &i2s1m0_lrcktx > - &i2s1m0_sdi0 > - &i2s1m0_sdo0>; > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0>; > - }; > -}; > - > -&pcie2x1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_reset_h>; > - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie_p>; > - status = "okay"; > -}; > - > -&pinctrl { > - bt { > - bt_enable_h: bt-enable-h { > - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - bt_host_wake_l: bt-host-wake-l { > - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - > - bt_wake_l: bt-wake-l { > - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - fan { > - fan_en_h: fan-en-h { > - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - leds { > - work_led_enable_h: work-led-enable-h { > - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - diy_led_enable_h: diy-led-enable-h { > - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie_enable_h: pcie-enable-h { > - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie_reset_h: pcie-reset-h { > - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - usb2 { > - vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { > - rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - sdio-pwrseq { > - wifi_enable_h: wifi-enable-h { > - rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - vcc_sd { > - vcc_sd_h: vcc-sd-h { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc1v8_dvp>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - mmc-hs200-1_8v; > - non-removable; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&sdmmc1 { > - bus-width = <4>; > - cap-sd-highspeed; > - cap-sdio-irq; > - keep-power-in-suspend; > - mmc-pwrseq = <&sdio_pwrseq>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc_wl>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sfc { > - pinctrl-0 = <&fspi_pins>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - flash@0 { > - compatible = "jedec,spi-nor"; > - reg = <0>; > - spi-max-frequency = <24000000>; > - spi-rx-bus-width = <4>; > - spi-tx-bus-width = <1>; > - }; > -}; > - > -/* spdif is exposed on con40 pin 18 */ > -&spdif { > - status = "okay"; > -}; > - > -/* spi1 is exposed on con40 > - * pin 11 - spi1_mosi_m1 > - * pin 13 - spi1_miso_m1 > - * pin 15 - spi1_clk_m1 > - * pin 17 - spi1_cs0_m1 > - */ > -&spi1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; > -}; > - > -&tsadc { > - /* tshut mode 0:CRU 1:GPIO */ > - rockchip,hw-tshut-mode = <1>; > - /* tshut polarity 0:LOW 1:HIGH */ > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -/* uart0 is exposed on con40 > - * pin 12 - uart0_tx > - * pin 14 - uart0_rx > - */ > -&uart0 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart0_xfer>; > - status = "okay"; > -}; > - > -&uart1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; > - status = "okay"; > - uart-has-rtscts; > - > - bluetooth { > - compatible = "brcm,bcm43438-bt"; > - clocks = <&rk817 1>; > - clock-names = "lpo"; > - host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; > - device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; > - shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; > - vbat-supply = <&vcc_sys>; > - vddio-supply = <&vcca1v8_pmu>; > - max-speed = <3000000>; > - }; > -}; > - > -/* uart2 is exposed on con40 > - * pin 8 - uart2_tx_m0_debug > - * pin 10 - uart2_rx_m0_debug > - */ > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - dr_mode = "host"; > - status = "okay"; > -}; > - > -/* usb3 controller is muxed with sata1 */ > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb20_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb20_otg>; > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - phy-supply = <&vcc5v0_usb20_host>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc5v0_usb20_host>; > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3566-quartz64-b.dts b/arch/arm/dts/rk3566-quartz64-b.dts > deleted file mode 100644 > index 2d92713be2a0..000000000000 > --- a/arch/arm/dts/rk3566-quartz64-b.dts > +++ /dev/null > @@ -1,737 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3566.dtsi" > - > -/ { > - model = "Pine64 RK3566 Quartz64-B Board"; > - compatible = "pine64,quartz64-b", "rockchip,rk3566"; > - > - aliases { > - ethernet0 = &gmac1; > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - mmc2 = &sdmmc1; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - gmac1_clkin: external-gmac1-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "gmac1_clkin"; > - #clock-cells = <0>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led-user { > - label = "user-led"; > - default-state = "on"; > - gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&user_led_enable_h>; > - retain-state-suspended; > - }; > - }; > - > - sound { > - compatible = "simple-audio-card"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,name = "Analog RK809"; > - simple-audio-card,mclk-fs = <256>; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s1_8ch>; > - }; > - > - simple-audio-card,codec { > - sound-dai = <&rk809>; > - }; > - }; > - > - sdio_pwrseq: sdio-pwrseq { > - status = "okay"; > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk809 1>; > - clock-names = "ext_clock"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_enable_h>; > - reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; > - post-power-on-delay-ms = <100>; > - power-off-delay-us = <5000000>; > - }; > - > - vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_enable_h>; > - regulator-name = "vcc3v3_pcie_p"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc_3v3>; > - }; > - > - vcc5v0_in: vcc5v0-in-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_in"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_in>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-always-on; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb30_host"; > - enable-active-high; > - gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb30_host_en_h>; > - regulator-always-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb_otg"; > - enable-active-high; > - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en_h>; > - regulator-always-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_sys>; > - }; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&combphy2 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; > - clock_in_out = "input"; > - phy-mode = "rgmii"; > - phy-supply = <&vcc_3v3>; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m1_miim > - &gmac1m1_tx_bus2 > - &gmac1m1_rx_bus2 > - &gmac1m1_rgmii_clk > - &gmac1m1_clkinout > - &gmac1m1_rgmii_bus>; > - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f, also works well here */ > - snps,reset-delays-us = <0 20000 100000>; > - tx_delay = <0x4f>; > - rx_delay = <0x24>; > - phy-handle = <&rgmii_phy1>; > - status = "okay"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - clock-output-names = "rk808-clkout1", "rk808-clkout2"; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; > - rockchip,system-power-controller; > - #sound-dai-cells = <0>; > - wakeup-source; > - #clock-cells = <1>; > - > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - > - regulators { > - vdd_log: DCDC_REG1 { > - regulator-name = "vdd_log"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <1350000>; > - regulator-initial-mode = <0x2>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-boot-on; > - regulator-name = "vcc_3v3"; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - }; > - }; > - }; > -}; > - > -/* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */ > -&i2c2 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c2m1_xfer>; > - status = "okay"; > -}; > - > -/* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */ > -&i2c3 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c3m1_xfer>; > - status = "okay"; > -}; > - > -/* > - * i2c4_m0 is exposed on PI40, pulled up to vcc_3v3 > - * pin 27 - i2c4_sda_m0 > - * pin 28 - i2c4_scl_m0 > - */ > -&i2c4 { > - status = "okay"; > -}; > - > -/* > - * i2c5_m0 is exposed on PI40 > - * pin 29 - i2c5_scl_m0 > - * pin 31 - i2c5_sda_m0 > - */ > -&i2c5 { > - status = "disabled"; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&i2s1_8ch { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s1m0_sclktx > - &i2s1m0_lrcktx > - &i2s1m0_sdi0 > - &i2s1m0_sdo0>; > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@1 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x1>; > - }; > -}; > - > -&pcie2x1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_reset_h>; > - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie_p>; > - status = "okay"; > -}; > - > -&pinctrl { > - bt { > - bt_enable_h: bt-enable-h { > - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - bt_host_wake_l: bt-host-wake-l { > - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - > - bt_wake_l: bt-wake-l { > - rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - leds { > - user_led_enable_h: user-led-enable-h { > - rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie_enable_h: pcie-enable-h { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie_reset_h: pcie-reset-h { > - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int: pmic_int { > - rockchip,pins = > - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - sdio-pwrseq { > - wifi_enable_h: wifi-enable-h { > - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb { > - vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h { > - rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h { > - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - status = "okay"; > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcca1v8_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcca1v8_pmu>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_3v3>; > - vccio7-supply = <&vcc_3v3>; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - mmc-hs200-1_8v; > - non-removable; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr50; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&sdmmc1 { > - bus-width = <4>; > - cap-sd-highspeed; > - cap-sdio-irq; > - keep-power-in-suspend; > - mmc-pwrseq = <&sdio_pwrseq>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; > - vmmc-supply = <&vcc3v3_sys>; > - vqmmc-supply = <&vcca1v8_pmu>; > - status = "okay"; > -}; > - > -&sfc { > - pinctrl-0 = <&fspi_pins>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "okay"; > - > - flash@0 { > - compatible = "jedec,spi-nor"; > - reg = <0>; > - spi-max-frequency = <24000000>; > - spi-rx-bus-width = <4>; > - spi-tx-bus-width = <1>; > - }; > -}; > - > -&tsadc { > - status = "okay"; > -}; > - > -&uart1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; > - status = "okay"; > - uart-has-rtscts; > - > - bluetooth { > - compatible = "brcm,bcm4345c5"; > - clocks = <&rk809 1>; > - clock-names = "lpo"; > - device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; > - host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; > - shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; > - vbat-supply = <&vcc3v3_sys>; > - vddio-supply = <&vcca1v8_pmu>; > - }; > -}; > - > -/* > - * uart2_m0 is exposed on PI40 > - * pin 8 - uart2_tx_m0 > - * pin 10 - uart2_rx_m0 > - */ > -&uart2 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb30_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc5v0_usb30_host>; > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3566-radxa-cm3-io.dts b/arch/arm/dts/rk3566-radxa-cm3-io.dts > deleted file mode 100644 > index 3ae24e39450a..000000000000 > --- a/arch/arm/dts/rk3566-radxa-cm3-io.dts > +++ /dev/null > @@ -1,281 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2022 Radxa Limited > - * Copyright (c) 2022 Amarula Solutions(India) > - */ > - > -/dts-v1/; > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3566.dtsi" > -#include "rk3566-radxa-cm3.dtsi" > - > -/ { > - model = "Radxa Compute Module 3(CM3) IO Board"; > - compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566"; > - > - aliases { > - ethernet0 = &gmac1; > - mmc1 = &sdmmc0; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - gmac1_clkin: external-gmac1-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "gmac1_clkin"; > - #clock-cells = <0>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led-1 { > - gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>; > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_ACTIVITY; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&pi_nled_activity>; > - }; > - }; > - > - vcc5v0_usb30: vcc5v0-usb30-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb30"; > - enable-active-high; > - gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb30_en_h>; > - regulator-always-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc_sys>; > - }; > - > - vcca1v8_image: vcca1v8-image-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcca1v8_image"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc_1v8_p>; > - }; > - > - vdda0v9_image: vdda0v9-image-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcca0v9_image"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - vin-supply = <&vdda_0v9>; > - }; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; > - assigned-clock-rates = <0>, <125000000>; > - clock_in_out = "input"; > - phy-handle = <&rgmii_phy1>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m0_miim > - &gmac1m0_tx_bus2 > - &gmac1m0_rx_bus2 > - &gmac1m0_rgmii_clk > - &gmac1m0_rgmii_bus > - &gmac1m0_clkinout>; > - snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - tx_delay = <0x46>; > - rx_delay = <0x2e>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - }; > -}; > - > -&pinctrl { > - gmac1 { > - gmac1m0_miim: gmac1m0-miim { > - rockchip,pins = > - /* gmac1_mdcm0 */ > - <3 RK_PC4 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_mdiom0 */ > - <3 RK_PC5 3 &pcfg_pull_none_drv_level_15>; > - }; > - > - gmac1m0_rx_bus2: gmac1m0-rx-bus2 { > - rockchip,pins = > - /* gmac1_rxd0m0 */ > - <3 RK_PB1 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_rxd1m0 */ > - <3 RK_PB2 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_rxdvcrsm0 */ > - <3 RK_PB3 3 &pcfg_pull_none_drv_level_15>; > - }; > - > - gmac1m0_tx_bus2: gmac1m0-tx-bus2 { > - rockchip,pins = > - /* gmac1_txd0m0 */ > - <3 RK_PB5 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_txd1m0 */ > - <3 RK_PB6 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_txenm0 */ > - <3 RK_PB7 3 &pcfg_pull_none_drv_level_15>; > - }; > - > - gmac1m0_rgmii_clk: gmac1m0-rgmii-clk { > - rockchip,pins = > - /* gmac1_rxclkm0 */ > - <3 RK_PA7 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_txclkm0 */ > - <3 RK_PA6 3 &pcfg_pull_none_drv_level_15>; > - }; > - > - gmac1m0_rgmii_bus: gmac1m0-rgmii-bus { > - rockchip,pins = > - /* gmac1_rxd2m0 */ > - <3 RK_PA4 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_rxd3m0 */ > - <3 RK_PA5 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_txd2m0 */ > - <3 RK_PA2 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_txd3m0 */ > - <3 RK_PA3 3 &pcfg_pull_none_drv_level_15>; > - }; > - > - gmac1m0_clkinout: gmac1m0-clkinout { > - rockchip,pins = > - /* gmac1_mclkinoutm0 */ > - <3 RK_PC0 3 &pcfg_pull_none_drv_level_15>; > - }; > - }; > - > - leds { > - pi_nled_activity: pi-nled-activity { > - rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - sdcard { > - sdmmc_pwren: sdmmc-pwren { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb { > - vcc5v0_usb30_en_h: vcc5v0-host-en-h { > - rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-mmc-highspeed; > - cap-sd-highspeed; > - disable-wp; > - vqmmc-supply = <&vccio_sd>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb30>; > - status = "okay"; > -}; > - > -&usb2phy1_host { > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3566-radxa-cm3.dtsi b/arch/arm/dts/rk3566-radxa-cm3.dtsi > deleted file mode 100644 > index 45de2630bb50..000000000000 > --- a/arch/arm/dts/rk3566-radxa-cm3.dtsi > +++ /dev/null > @@ -1,425 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2022 Radxa Limited > - * Copyright (c) 2022 Amarula Solutions(India) > - */ > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > - > -/ { > - compatible = "radxa,cm3", "rockchip,rk3566"; > - > - aliases { > - mmc0 = &sdhci; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led-0 { > - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_STATUS; > - linux,default-trigger = "timer"; > - default-state = "on"; > - pinctrl-names = "default"; > - pinctrl-0 = <&user_led2>; > - }; > - }; > - > - vcc_sys: vcc-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > - > - vcc_1v8: vcc-1v8-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc_1v8_p>; > - }; > - > - vcc_3v3: vcc-3v3-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - vcca_1v8: vcca-1v8-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc_1v8_p>; > - }; > - > - sdio_pwrseq: pwrseq-sdio { > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk817 1>; > - clock-names = "ext_clock"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_reg_on_h>; > - reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; > - }; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu_npu>; > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <712500>; > - regulator-max-microvolt = <1390000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk817: pmic@20 { > - compatible = "rockchip,rk817"; > - reg = <0x20>; > - #clock-cells = <1>; > - clock-output-names = "rk817-clkout1", "rk817-clkout2"; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int_l>; > - rockchip,system-power-controller; > - wakeup-source; > - > - vcc1-supply = <&vcc_sys>; > - vcc2-supply = <&vcc_sys>; > - vcc3-supply = <&vcc_sys>; > - vcc4-supply = <&vcc_sys>; > - vcc5-supply = <&vcc_sys>; > - vcc6-supply = <&vcc_sys>; > - vcc7-supply = <&vcc_sys>; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdd_gpu_npu: DCDC_REG2 { > - regulator-name = "vdd_gpu_npu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vcc3v3_sys: DCDC_REG4 { > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG1 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcc_1v8_p: LDO_REG7 { > - regulator-name = "vcc_1v8_p"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc1v8_dvp: LDO_REG8 { > - regulator-name = "vcc1v8_dvp"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc2v8_dvp: LDO_REG9 { > - regulator-name = "vcc2v8_dvp"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - }; > - }; > -}; > - > -&pinctrl { > - bluetooth { > - bt_host_wake_h: bt-host-wake-h { > - rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - bt_reg_on_h: bt-reg-on-h { > - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - bt_wake_host_h: bt-wake-host-h { > - rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - leds { > - user_led2: user-led2 { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - wifi { > - wifi_reg_on_h: wifi-reg-on-h { > - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - wifi_host_wake_h: wifi-host-wake-h { > - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc_3v3>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_3v3>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sdmmc1 { > - #address-cells = <1>; > - #size-cells = <0>; > - bus-width = <4>; > - disable-wp; > - cap-sd-highspeed; > - cap-sdio-irq; > - keep-power-in-suspend; > - mmc-pwrseq = <&sdio_pwrseq>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > - > - wifi@1 { > - compatible = "brcm,bcm43455-fmac"; > - reg = <1>; > - interrupt-parent = <&gpio2>; > - interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "host-wake"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_host_wake_h>; > - }; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - mmc-hs200-1_8v; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&uart1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>; > - status = "okay"; > - > - bluetooth { > - compatible = "brcm,bcm4345c5"; > - clocks = <&rk817 1>; > - clock-names = "lpo"; > - device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>; > - host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; > - reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>; > - vbat-supply = <&vcc_3v3>; > - vddio-supply = <&vcc_1v8>; > - }; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > diff --git a/arch/arm/dts/rk3566-soquartz-blade.dts b/arch/arm/dts/rk3566-soquartz-blade.dts > deleted file mode 100644 > index fdbf1c783242..000000000000 > --- a/arch/arm/dts/rk3566-soquartz-blade.dts > +++ /dev/null > @@ -1,198 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/input/input.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > - > -#include "rk3566-soquartz.dtsi" > - > -/ { > - model = "PINE64 RK3566 SOQuartz on Blade carrier board"; > - compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566"; > - > - aliases { > - ethernet0 = &gmac1; > - }; > - > - /* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */ > - vcc3v0_sd: vcc3v0-sd-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v0_sd"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - /* labeled VCC_SSD in schematic */ > - vcc3v3_pcie_p: vcc3v3-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_pcie_p"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vbus>; > - }; > - > - vcc5v_dcin: vcc5v-dcin-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v_dcin"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > -}; > - > -&combphy2 { > - phy-supply = <&vcc3v3_sys>; > - status = "okay"; > -}; > - > -&gmac1 { > - status = "okay"; > -}; > - > -/* > - * i2c1 is exposed on CM1 / Module1A > - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu > - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu > - */ > -&i2c1 { > - status = "okay"; > - > -}; > - > -/* > - * i2c2 is exposed on CM1 / Module1A - to PI40 > - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch > - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 > - */ > -&i2c2 { > - status = "disabled"; > -}; > - > -/* > - * i2c3 is exposed on CM1 / Module1A - to PI40 > - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 > - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 > - */ > -&i2c3 { > - status = "disabled"; > -}; > - > -/* > - * i2c4 is exposed on CM2 / Module1B - to PI40 > - * pin 45 - GPIO24 - i2c4_scl_m1 > - * pin 47 - GPIO23 - i2c4_sda_m1 > - */ > -&i2c4 { > - status = "disabled"; > -}; > - > -/* > - * i2s1_8ch is exposed on CM1 / Module1A - to PI40 > - * pin 24 - GPIO26 - i2s1_sdi1_m1 > - * pin 25 - GPIO21 - i2s1_sdo0_m1 > - * pin 26 - GPIO19 - i2s1_lrck_tx_m1 > - * pin 27 - GPIO20 - i2s1_sdi0_m1 > - * pin 29 - GPIO16 - i2s1_sdi3_m1 > - * pin 30 - GPIO6 - i2s1_sdi2_m1 > - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 > - * pin 41 - GPIO25 - i2s1_sdo2_m1 > - * pin 49 - GPIO18 - i2s1_sclk_tx_m1 > - * pin 50 - GPIO17 - i2s1_mclk_m1 > - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 > - */ > -&i2s1_8ch { > - status = "disabled"; > -}; > - > -&led_diy { > - color = <LED_COLOR_ID_RED>; > - function = LED_FUNCTION_DISK_ACTIVITY; > - linux,default-trigger = "disk-activity"; > - status = "okay"; > -}; > - > -&led_work { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_STATUS; > - linux,default-trigger = "heartbeat"; > - status = "okay"; > -}; > - > -&pcie2x1 { > - vpcie3v3-supply = <&vcc3v3_pcie_p>; > - status = "okay"; > -}; > - > -&rgmii_phy1 { > - status = "okay"; > -}; > - > -/* > - * saradc is exposed on CM1 / Module1A - to J2 > - * pin 94 - AIN1 - saradc_vin3 > - * pin 96 - AIN0 - saradc_vin2 > - */ > -&saradc { > - status = "disabled"; > -}; > - > -&sdmmc0 { > - vmmc-supply = <&vcc3v0_sd>; > - status = "okay"; > -}; > - > -/* > - * spi3 is exposed on CM1 / Module1A - to PI40 > - * pin 37 - GPIO7 - spi3_cs1_m0 > - * pin 38 - GPIO11 - spi3_clk_m0 > - * pin 39 - GPIO8 - spi3_cs0_m0 > - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch > - * pin 44 - GPIO10 - spi3_mosi_m0 > - */ > -&spi3 { > - status = "disabled"; > -}; > - > -/* > - * uart2 is exposed on CM1 / Module1A - to PI40 > - * pin 51 - GPIO15 - uart2_rx_m0 > - * pin 55 - GPIO14 - uart2_tx_m0 > - */ > -&uart2 { > - status = "okay"; > -}; > - > -/* > - * uart7 is exposed on CM1 / Module1A - to PI40 > - * pin 46 - GPIO22 - uart7_tx_m2 > - * pin 47 - GPIO23 - uart7_rx_m2 > - */ > -&uart7 { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vbus>; > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - status = "okay"; > -}; > - > -&vbus { > - vin-supply = <&vcc5v_dcin>; > -}; > diff --git a/arch/arm/dts/rk3566-soquartz-cm4.dts b/arch/arm/dts/rk3566-soquartz-cm4.dts > deleted file mode 100644 > index 6ed3fa4aee34..000000000000 > --- a/arch/arm/dts/rk3566-soquartz-cm4.dts > +++ /dev/null > @@ -1,196 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include "rk3566-soquartz.dtsi" > - > -/ { > - model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board"; > - compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566"; > - > - aliases { > - ethernet0 = &gmac1; > - }; > - > - /* labeled +12v in schematic */ > - vcc12v_dcin: vcc12v-dcin-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc12v_dcin"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - /* labeled +5v in schematic */ > - vcc_5v: vcc-5v-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_5v"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc_sd_pwr: vcc-sd-pwr-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_sd_pwr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_sys>; > - }; > -}; > - > -/* phy for pcie */ > -&combphy2 { > - phy-supply = <&vcc3v3_sys>; > - status = "okay"; > -}; > - > -&gmac1 { > - status = "okay"; > -}; > - > -/* > - * i2c1 is exposed on CM1 / Module1A > - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu > - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu > - */ > -&i2c1 { > - status = "okay"; > - > - /* > - * the rtc interrupt is tied to PMIC_PWRON, > - * it will force reset the board if triggered. > - */ > - pcf85063: rtc@51 { > - compatible = "nxp,pcf85063"; > - reg = <0x51>; > - }; > -}; > - > -/* > - * i2c2 is exposed on CM1 / Module1A - to PI40 > - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch > - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 > - */ > -&i2c2 { > - status = "disabled"; > -}; > - > -/* > - * i2c3 is exposed on CM1 / Module1A - to PI40 > - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 > - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 > - */ > -&i2c3 { > - status = "disabled"; > -}; > - > -/* > - * i2c4 is exposed on CM2 / Module1B - to PI40 > - * pin 45 - GPIO24 - i2c4_scl_m1 > - * pin 47 - GPIO23 - i2c4_sda_m1 > - */ > -&i2c4 { > - status = "disabled"; > -}; > - > -/* > - * i2s1_8ch is exposed on CM1 / Module1A - to PI40 > - * pin 24 - GPIO26 - i2s1_sdi1_m1 > - * pin 25 - GPIO21 - i2s1_sdo0_m1 > - * pin 26 - GPIO19 - i2s1_lrck_tx_m1 > - * pin 27 - GPIO20 - i2s1_sdi0_m1 > - * pin 29 - GPIO16 - i2s1_sdi3_m1 > - * pin 30 - GPIO6 - i2s1_sdi2_m1 > - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 > - * pin 41 - GPIO25 - i2s1_sdo2_m1 > - * pin 49 - GPIO18 - i2s1_sclk_tx_m1 > - * pin 50 - GPIO17 - i2s1_mclk_m1 > - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 > - */ > -&i2s1_8ch { > - status = "disabled"; > -}; > - > -&led_diy { > - status = "okay"; > -}; > - > -&led_work { > - status = "okay"; > -}; > - > -&pcie2x1 { > - vpcie3v3-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&rgmii_phy1 { > - status = "okay"; > -}; > - > -/* > - * saradc is exposed on CM1 / Module1A - to J2 > - * pin 94 - AIN1 - saradc_vin3 > - * pin 96 - AIN0 - saradc_vin2 > - */ > -&saradc { > - status = "disabled"; > -}; > - > -&sdmmc0 { > - vmmc-supply = <&vcc_sd_pwr>; > - status = "okay"; > -}; > - > -/* > - * spi3 is exposed on CM1 / Module1A - to PI40 > - * pin 37 - GPIO7 - spi3_cs1_m0 > - * pin 38 - GPIO11 - spi3_clk_m0 > - * pin 39 - GPIO8 - spi3_cs0_m0 > - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch > - * pin 44 - GPIO10 - spi3_mosi_m0 > - */ > -&spi3 { > - status = "disabled"; > -}; > - > -/* > - * uart2 is exposed on CM1 / Module1A - to PI40 > - * pin 51 - GPIO15 - uart2_rx_m0 > - * pin 55 - GPIO14 - uart2_tx_m0 > - */ > -&uart2 { > - status = "okay"; > -}; > - > -/* > - * uart7 is exposed on CM1 / Module1A - to PI40 > - * pin 46 - GPIO22 - uart7_tx_m2 > - * pin 47 - GPIO23 - uart7_rx_m2 > - */ > -&uart7 { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc_5v>; > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - status = "okay"; > -}; > - > -&vbus { > - vin-supply = <&vcc_5v>; > -}; > diff --git a/arch/arm/dts/rk3566-soquartz-model-a.dts b/arch/arm/dts/rk3566-soquartz-model-a.dts > deleted file mode 100644 > index f2095dfa4eaf..000000000000 > --- a/arch/arm/dts/rk3566-soquartz-model-a.dts > +++ /dev/null > @@ -1,236 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include "rk3566-soquartz.dtsi" > - > -/ { > - model = "PINE64 RK3566 SOQuartz on Model A carrier board"; > - compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566"; > - > - aliases { > - ethernet0 = &gmac1; > - }; > - > - /* labeled DCIN_12V in schematic */ > - vcc12v_dcin: vcc12v-dcin-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc12v_dcin"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - vcc5v0_usb: vcc5v0-usb-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - /* > - * Labelled VCC3V0_SD in schematic to not conflict with PMIC > - * regulator, it's 3.3v in actuality > - */ > - vcc3v0_sd: vcc3v0-sd-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v0_sd"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - vcc3v3_pcie: vcc3v3-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_pcie"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc12v_pcie: vcc12v-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc12v_pcie"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > -}; > - > -/* phy for pcie */ > -&combphy2 { > - phy-supply = <&vcc3v3_sys>; > - status = "okay"; > -}; > - > -&gmac1 { > - status = "okay"; > -}; > - > -/* > - * i2c1 is exposed on CM1 / Module1A > - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu > - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu > - */ > -&i2c1 { > - status = "okay"; > - > - /* > - * the rtc interrupt is tied to PMIC_PWRON, > - * it will force reset the board if triggered. > - */ > - pcf85063: rtc@51 { > - compatible = "nxp,pcf85063"; > - reg = <0x51>; > - }; > -}; > - > -/* > - * i2c2 is exposed on CM1 / Module1A - to PI40 > - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch > - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 > - */ > -&i2c2 { > - status = "disabled"; > -}; > - > -/* > - * i2c3 is exposed on CM1 / Module1A - to PI40 > - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 > - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 > - */ > -&i2c3 { > - status = "disabled"; > -}; > - > -/* > - * i2c4 is exposed on CM2 / Module1B - to PI40 > - * pin 45 - GPIO24 - i2c4_scl_m1 > - * pin 47 - GPIO23 - i2c4_sda_m1 > - */ > -&i2c4 { > - status = "disabled"; > -}; > - > -/* > - * i2s1_8ch is exposed on CM1 / Module1A - to PI40 > - * pin 24 - GPIO26 - i2s1_sdi1_m1 > - * pin 25 - GPIO21 - i2s1_sdo0_m1 > - * pin 26 - GPIO19 - i2s1_lrck_tx_m1 > - * pin 27 - GPIO20 - i2s1_sdi0_m1 > - * pin 29 - GPIO16 - i2s1_sdi3_m1 > - * pin 30 - GPIO6 - i2s1_sdi2_m1 > - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 > - * pin 41 - GPIO25 - i2s1_sdo2_m1 > - * pin 49 - GPIO18 - i2s1_sclk_tx_m1 > - * pin 50 - GPIO17 - i2s1_mclk_m1 > - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 > - */ > -&i2s1_8ch { > - status = "disabled"; > -}; > - > -&led_diy { > - status = "okay"; > -}; > - > -&led_work { > - status = "okay"; > -}; > - > -&pcie2x1 { > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&rgmii_phy1 { > - status = "okay"; > -}; > - > -&rgmii_phy1 { > - status = "okay"; > -}; > - > -/* > - * saradc is exposed on CM1 / Module1A - to J2 > - * pin 94 - AIN1 - saradc_vin3 > - * pin 96 - AIN0 - saradc_vin2 > - */ > -&saradc { > - status = "disabled"; > -}; > - > -/* > - * vmmc-supply is vcc3v3_sd on v1.0 and vcc3v0_sd on v1.1+ > - * the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys, > - * so we use vcc3v3_sd here to ensure the regulator is enabled on older boards. > - */ > -&sdmmc0 { > - vmmc-supply = <&vcc3v3_sd>; > - status = "okay"; > -}; > - > -/* > - * spi3 is exposed on CM1 / Module1A - to PI40 > - * pin 37 - GPIO7 - spi3_cs1_m0 > - * pin 38 - GPIO11 - spi3_clk_m0 > - * pin 39 - GPIO8 - spi3_cs0_m0 > - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch > - * pin 44 - GPIO10 - spi3_mosi_m0 > - */ > -&spi3 { > - status = "disabled"; > -}; > - > -/* > - * uart2 is exposed on CM1 / Module1A - to PI40 > - * pin 51 - GPIO15 - uart2_rx_m0 > - * pin 55 - GPIO14 - uart2_tx_m0 > - */ > -&uart2 { > - status = "okay"; > -}; > - > -/* > - * uart7 is exposed on CM1 / Module1A - to PI40 > - * pin 46 - GPIO22 - uart7_tx_m2 > - * pin 47 - GPIO23 - uart7_rx_m2 > - */ > -&uart7 { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb>; > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - status = "okay"; > -}; > - > -&vbus { > - vin-supply = <&vcc5v0_usb>; > -}; > - > -&vcc3v3_sd { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - status = "okay"; > -}; > diff --git a/arch/arm/dts/rk3566-soquartz.dtsi b/arch/arm/dts/rk3566-soquartz.dtsi > deleted file mode 100644 > index bfb7b952f4c5..000000000000 > --- a/arch/arm/dts/rk3566-soquartz.dtsi > +++ /dev/null > @@ -1,684 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3566.dtsi" > - > -/ { > - model = "Pine64 RK3566 SoQuartz SOM"; > - compatible = "pine64,soquartz", "rockchip,rk3566"; > - > - aliases { > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - mmc2 = &sdmmc1; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - gmac1_clkin: external-gmac1-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "gmac1_clkin"; > - #clock-cells = <0>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led_diy: led-diy { > - label = "diy-led"; > - default-state = "on"; > - gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&diy_led_enable_h>; > - retain-state-suspended; > - status = "disabled"; > - }; > - > - led_work: led-work { > - label = "work-led"; > - default-state = "off"; > - gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&work_led_enable_h>; > - retain-state-suspended; > - status = "disabled"; > - }; > - }; > - > - sdio_pwrseq: sdio-pwrseq { > - status = "okay"; > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk809 1>; > - clock-names = "ext_clock"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_enable_h>; > - reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; > - }; > - > - vbus: vbus-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vbus"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > - > - /* sourced from vbus, vbus is provided by the carrier board */ > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vbus>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; > - clock_in_out = "input"; > - phy-supply = <&vcc_3v3>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m0_miim > - &gmac1m0_tx_bus2 > - &gmac1m0_rx_bus2 > - &gmac1m0_rgmii_clk > - &gmac1m0_clkinout > - &gmac1m0_rgmii_bus>; > - snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f, also works well here */ > - snps,reset-delays-us = <0 20000 100000>; > - tx_delay = <0x30>; > - rx_delay = <0x10>; > - phy-handle = <&rgmii_phy1>; > - status = "disabled"; > -}; > - > -&gpio0 { > - nextrst-hog { > - gpio-hog; > - /* > - * GPIO_ACTIVE_LOW + output-low here means that the pin is set > - * to high, because output-low decides the value pre-inversion. > - */ > - gpios = <RK_PA5 GPIO_ACTIVE_LOW>; > - line-name = "nEXTRST"; > - output-low; > - }; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <1>; > - clock-output-names = "rk808-clkout1", "rk808-clkout2"; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int_l>; > - rockchip,system-power-controller; > - wakeup-source; > - > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-name = "vcc_ddr"; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vdd_npu"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda0v9_image"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda_0v9"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda0v9_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vccio_acodec"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vccio_sd"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vcc3v3_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcca_1v8"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcca1v8_pmu"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcca1v8_image"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - status = "disabled"; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - }; > - }; > -}; > - > -/* > - * i2c1 is exposed on CM1 / Module1A > - * pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu > - * pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu > - */ > -&i2c1 { > - status = "disabled"; > -}; > - > -/* > - * i2c2 is exposed on CM1 / Module1A > - * pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch > - * pin 58 - i2c2_sda_m1, pullup to vcc_3v3 > - */ > -&i2c2 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c2m1_xfer>; > - status = "disabled"; > -}; > - > -/* > - * i2c3 is exposed on CM1 / Module1A > - * pin 35 - i2c3_scl_m0, pullup to vcc_3v3 > - * pin 36 - i2c3_sda_m0, pullup to vcc_3v3 > - */ > -&i2c3 { > - status = "disabled"; > -}; > - > -/* > - * i2c4 is exposed on CM2 / Module1B > - * pin 45 - i2c4_scl_m1 > - * pin 47 - i2c4_sda_m1 > - */ > -&i2c4 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c4m1_xfer>; > - status = "disabled"; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -/* > - * i2s1_8ch is exposed on CM1 / Module1A > - * pin 24 - i2s1_sdi1_m1 > - * pin 25 - i2s1_sdo0_m1 > - * pin 26 - i2s1_lrck_tx_m1 > - * pin 27 - i2s1_sdi0_m1 > - * pin 29 - i2s1_sdi3_m1 > - * pin 30 - i2s1_sdi2_m1 > - * pin 40 - i2s1_sdo1_m1, shared with spi3 > - * pin 41 - i2s1_sdo2_m1 > - * pin 49 - i2s1_sclk_tx_m1 > - * pin 50 - i2s1_mclk_m1 > - * pin 56 - i2s1_sdo3_m1, shared with i2c2 > - */ > -&i2s1_8ch { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx > - &i2s1m1_lrcktx &i2s1m1_lrckrx > - &i2s1m1_sdi0 &i2s1m1_sdi1 > - &i2s1m1_sdi2 &i2s1m1_sdi3 > - &i2s1m1_sdo0 &i2s1m1_sdo1 > - &i2s1m1_sdo2 &i2s1m1_sdo3>; > - status = "disabled"; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0>; > - status = "disabled"; > - }; > -}; > - > -&pcie2x1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_reset_h>; > - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; > -}; > - > -&pinctrl { > - bt { > - bt_enable_h: bt-enable-h { > - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - bt_host_wake_l: bt-host-wake-l { > - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - > - bt_wake_l: bt-wake-l { > - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - leds { > - work_led_enable_h: work-led-enable-h { > - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - diy_led_enable_h: diy-led-enable-h { > - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie_clkreq_h: pcie-clkreq-h { > - rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - pcie_reset_h: pcie-reset-h { > - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - sdio-pwrseq { > - wifi_enable_h: wifi-enable-h { > - rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vcc_3v3>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_3v3>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -/* > - * saradc is exposed on CM1 / Module1A > - * pin 94 - saradc_vin3 > - * pin 96 - saradc_vin2 > - */ > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "disabled"; > -}; > - > -&sdhci { > - bus-width = <8>; > - mmc-hs200-1_8v; > - non-removable; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - broken-cd; > - bus-width = <4>; > - cap-sd-highspeed; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - vqmmc-supply = <&vccio_sd>; > - status = "disabled"; > -}; > - > -&sdmmc1 { > - bus-width = <4>; > - cap-sd-highspeed; > - cap-sdio-irq; > - keep-power-in-suspend; > - mmc-pwrseq = <&sdio_pwrseq>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; > - sd-uhs-sdr50; > - vmmc-supply = <&vcc3v3_sys>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -/* > - * spi3 is exposed on CM1 / Module1A > - * pin 37 - spi3_cs1_m0 > - * pin 38 - spi3_clk_m0 > - * pin 39 - spi3_cs0_m0 > - * pin 40 - spi3_miso_m0, shared with i2s1_8ch > - * pin 44 - spi3_mosi_m0 > - */ > -&spi3 { > - status = "disabled"; > -}; > - > -&tsadc { > - status = "okay"; > -}; > - > -&uart1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; > - uart-has-rtscts; > - status = "okay"; > - > - bluetooth { > - compatible = "brcm,bcm43438-bt"; > - clocks = <&rk809 1>; > - clock-names = "lpo"; > - device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; > - host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; > - shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; > - vbat-supply = <&vcc3v3_sys>; > - vddio-supply = <&vcca1v8_pmu>; > - }; > -}; > - > -/* > - * uart2 is exposed on CM1 / Module1A > - * pin 51 - uart2_rx_m0 > - * pin 55 - uart2_tx_m0 > - */ > -&uart2 { > - status = "disabled"; > -}; > - > -/* > - * uart7 is exposed on CM1 / Module1A > - * pin 46 - uart7_tx_m2 > - * pin 47 - uart7_rx_m2 > - */ > -&uart7 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart7m2_xfer>; > - status = "disabled"; > -}; > - > -/* dwc3_otg is the only usb port available */ > -&usb2phy0 { > - status = "disabled"; > -}; > - > -&usb2phy0_otg { > - status = "disabled"; > -}; > - > -&usb_host0_xhci { > - status = "disabled"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3566.dtsi b/arch/arm/dts/rk3566.dtsi > deleted file mode 100644 > index 6c4b17d27bdc..000000000000 > --- a/arch/arm/dts/rk3566.dtsi > +++ /dev/null > @@ -1,35 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -#include "rk356x.dtsi" > - > -/ { > - compatible = "rockchip,rk3566"; > -}; > - > -&pipegrf { > - compatible = "rockchip,rk3566-pipe-grf", "syscon"; > -}; > - > -&power { > - power-domain@RK3568_PD_PIPE { > - reg = <RK3568_PD_PIPE>; > - clocks = <&cru PCLK_PIPE>; > - pm_qos = <&qos_pcie2x1>, > - <&qos_sata1>, > - <&qos_sata2>, > - <&qos_usb3_0>, > - <&qos_usb3_1>; > - #power-domain-cells = <0>; > - }; > -}; > - > -&usb_host0_xhci { > - phys = <&usb2phy0_otg>; > - phy-names = "usb2-phy"; > - extcon = <&usb2phy0>; > - maximum-speed = "high-speed"; > -}; > - > -&vop { > - compatible = "rockchip,rk3566-vop"; > -}; > diff --git a/arch/arm/dts/rk3568-bpi-r2-pro.dts b/arch/arm/dts/rk3568-bpi-r2-pro.dts > deleted file mode 100644 > index f9127ddfbb7d..000000000000 > --- a/arch/arm/dts/rk3568-bpi-r2-pro.dts > +++ /dev/null > @@ -1,852 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Author: Frank Wunderlich <frank-w@public-files.de> > - * > - */ > - > -/dts-v1/; > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3568.dtsi" > - > -/ { > - model = "Bananapi-R2 Pro (RK3568) DDR4 Board"; > - compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568"; > - > - aliases { > - ethernet0 = &gmac0; > - ethernet1 = &gmac1; > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - leds { > - compatible = "gpio-leds"; > - pinctrl-names = "default"; > - pinctrl-0 = <&blue_led_pin &green_led_pin>; > - > - blue_led: led-0 { > - color = <LED_COLOR_ID_BLUE>; > - default-state = "off"; > - function = LED_FUNCTION_STATUS; > - gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; > - }; > - > - green_led: led-1 { > - color = <LED_COLOR_ID_GREEN>; > - default-state = "on"; > - function = LED_FUNCTION_POWER; > - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; > - }; > - }; > - > - dc_12v: dc-12v-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "dc_12v"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - ir-receiver { > - compatible = "gpio-ir-receiver"; > - gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&ir_receiver_pin>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_12v>; > - }; > - > - pcie30_avdd0v9: pcie30-avdd0v9-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - pcie30_avdd1v8: pcie30-avdd1v8-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - /* pi6c pcie clock generator feeds both ports */ > - vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_pcie"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - enable-active-high; > - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; > - startup-delay-us = <200000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ > - vcc3v3_minipcie: vcc3v3-minipcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_minipcie"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - enable-active-high; > - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&minipcie_enable_h>; > - startup-delay-us = <50000>; > - vin-supply = <&vcc3v3_pi6c_05>; > - }; > - > - /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ > - vcc3v3_ngff: vcc3v3-ngff-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_ngff"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - enable-active-high; > - gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&ngffpcie_enable_h>; > - startup-delay-us = <50000>; > - vin-supply = <&vcc3v3_pi6c_05>; > - }; > - > - vcc5v0_usb: vcc5v0-usb-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_usb_host: vcc5v0-usb-host-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_host_en>; > - regulator-name = "vcc5v0_usb_host"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en>; > - regulator-name = "vcc5v0_usb_otg"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > -}; > - > -&combphy0 { > - /* used for USB3 */ > - status = "okay"; > -}; > - > -&combphy1 { > - /* used for USB3 */ > - status = "okay"; > -}; > - > -&combphy2 { > - /* used for SATA */ > - status = "okay"; > -}; > - > -&gmac0 { > - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; > - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; > - clock_in_out = "input"; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac0_miim > - &gmac0_tx_bus2 > - &gmac0_rx_bus2 > - &gmac0_rgmii_clk > - &gmac0_rgmii_bus>; > - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - tx_delay = <0x4f>; > - rx_delay = <0x0f>; > - status = "okay"; > - > - fixed-link { > - speed = <1000>; > - full-duplex; > - pause; > - }; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; > - clock_in_out = "output"; > - phy-handle = <&rgmii_phy1>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m1_miim > - &gmac1m1_tx_bus2 > - &gmac1m1_rx_bus2 > - &gmac1m1_rgmii_clk > - &gmac1m1_rgmii_bus>; > - > - snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - > - tx_delay = <0x3c>; > - rx_delay = <0x2f>; > - > - status = "okay"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>; > - rockchip,system-power-controller; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-always-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-always-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - regulator-always-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > -}; > - > -&i2c3 { > - status = "okay"; > - > - hym8563: rtc@51 { > - compatible = "haoyu,hym8563"; > - reg = <0x51>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>; > - #clock-cells = <0>; > - clock-output-names = "rtcic_32kout"; > - pinctrl-names = "default"; > - pinctrl-0 = <&hym8563_int>; > - wakeup-source; > - }; > -}; > - > -&i2c5 { > - /* pin 3 (SDA) + 4 (SCL) of header con2 */ > - status = "disabled"; > -}; > - > -&i2s0_8ch { > - /* hdmi sound */ > - status = "okay"; > -}; > - > -&mdio0 { > - #address-cells = <1>; > - #size-cells = <0>; > - > - switch@0 { > - compatible = "mediatek,mt7531"; > - reg = <0>; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@1 { > - reg = <1>; > - label = "lan0"; > - }; > - > - port@2 { > - reg = <2>; > - label = "lan1"; > - }; > - > - port@3 { > - reg = <3>; > - label = "lan2"; > - }; > - > - port@4 { > - reg = <4>; > - label = "lan3"; > - }; > - > - port@5 { > - reg = <5>; > - label = "cpu"; > - ethernet = <&gmac0>; > - phy-mode = "rgmii"; > - > - fixed-link { > - speed = <1000>; > - full-duplex; > - pause; > - }; > - }; > - }; > - }; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - }; > -}; > - > -&pcie30phy { > - data-lanes = <1 2>; > - phy-supply = <&vcc3v3_pi6c_05>; > - status = "okay"; > -}; > - > -&pcie3x1 { > - /* M.2 slot */ > - num-lanes = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&ngffpcie_reset_h>; > - reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_ngff>; > - status = "okay"; > -}; > - > -&pcie3x2 { > - /* mPCIe slot */ > - num-lanes = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&minipcie_reset_h>; > - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_minipcie>; > - status = "okay"; > -}; > - > -&pinctrl { > - leds { > - blue_led_pin: blue-led-pin { > - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - green_led_pin: green-led-pin { > - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - hym8563 { > - hym8563_int: hym8563-int { > - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - ir-receiver { > - ir_receiver_pin: ir-receiver-pin { > - rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - minipcie_enable_h: minipcie-enable-h { > - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; > - }; > - > - ngffpcie_enable_h: ngffpcie-enable-h { > - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; > - }; > - > - minipcie_reset_h: minipcie-reset-h { > - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; > - }; > - > - ngffpcie_reset_h: ngffpcie-reset-h { > - rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; > - }; > - }; > - > - pmic { > - pmic_int: pmic_int { > - rockchip,pins = > - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - usb { > - vcc5v0_usb_host_en: vcc5v0_usb_host_en { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_3v3>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&pwm8 { > - /* fan 5v - gnd - pwm */ > - status = "okay"; > -}; > - > -&pwm10 { > - /* pin 7 of header con2 */ > - status = "disabled"; > -}; > - > -&pwm11 { > - /* pin 15 of header con2 */ > - status = "disabled"; > -}; > - > -&pwm12 { > - /* pin 21 of header con2 */ > - /* shared with uart9 + spi3 */ > - pinctrl-0 = <&pwm12m1_pins>; > - status = "disabled"; > -}; > - > -&pwm13 { > - /* pin 24 of header con2 */ > - /* shared with uart9 */ > - pinctrl-0 = <&pwm13m1_pins>; > - status = "disabled"; > -}; > - > -&pwm14 { > - /* pin 23 of header con2 */ > - /* shared with spi3 */ > - pinctrl-0 = <&pwm14m1_pins>; > - status = "disabled"; > -}; > - > -&pwm15 { > - /* pin 19 of header con2 */ > - /* shared with spi3 */ > - pinctrl-0 = <&pwm15m1_pins>; > - status = "disabled"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sata2 { > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&spi3 { > - /* pin 19 (MO) + 21 (MI) + 23 (CK) of header con2 */ > - /* shared with pwm12/14/15 and uart9 */ > - pinctrl-0 = <&spi3m1_pins>; > - status = "disabled"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart0 { > - /* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */ > - status = "disabled"; > -}; > - > -&uart2 { > - /* debug-uart */ > - status = "okay"; > -}; > - > -&uart7 { > - /* pin 11 (TX) + 13 (RX) of header con2 */ > - pinctrl-0 = <&uart7m1_xfer>; > - status = "disabled"; > -}; > - > -&uart9 { > - /* pin 21 (TX) + 24 (RX) of header con2 */ > - /* shared with pwm13 and pwm12/spi3 */ > - pinctrl-0 = <&uart9m1_xfer>; > - status = "disabled"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - dr_mode = "host"; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&usb2phy1 { > - /* USB for PCIe/M2 */ > - status = "okay"; > -}; > - > -&usb2phy1_host { > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-evb.dts b/arch/arm/dts/rk3568-evb.dts > deleted file mode 100644 > index 19f8fc369b13..000000000000 > --- a/arch/arm/dts/rk3568-evb.dts > +++ /dev/null > @@ -1,689 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. > - * > - */ > - > -/dts-v1/; > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3568.dtsi" > - > -/ { > - model = "Rockchip RK3568 EVB1 DDR4 V10 Board"; > - compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568"; > - > - aliases { > - ethernet0 = &gmac0; > - ethernet1 = &gmac1; > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - dc_12v: dc-12v { > - compatible = "regulator-fixed"; > - regulator-name = "dc_12v"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led_work: led-0 { > - gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; > - function = LED_FUNCTION_HEARTBEAT; > - color = <LED_COLOR_ID_BLUE>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&led_work_en>; > - }; > - }; > - > - rk809-sound { > - compatible = "simple-audio-card"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,name = "Analog RK809"; > - simple-audio-card,mclk-fs = <256>; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s1_8ch>; > - }; > - simple-audio-card,codec { > - sound-dai = <&rk809>; > - }; > - }; > - > - vcc3v3_sys: vcc3v3-sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_sys: vcc5v0-sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_usb: vcc5v0-usb { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_usb_host: vcc5v0-usb-host { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_host_en>; > - regulator-name = "vcc5v0_usb_host"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en>; > - regulator-name = "vcc5v0_usb_otg"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc3v3_lcd0_n: vcc3v3-lcd0-n { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_lcd0_n"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - enable-active-high; > - gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; > - vin-supply = <&vcc3v3_sys>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc3v3_lcd0_n_en>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_lcd1_n: vcc3v3-lcd1-n { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_lcd1_n"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - enable-active-high; > - gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; > - vin-supply = <&vcc3v3_sys>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc3v3_lcd1_n_en>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > -}; > - > -&combphy0 { > - status = "okay"; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gmac0 { > - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; > - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; > - assigned-clock-rates = <0>, <125000000>; > - clock_in_out = "output"; > - phy-handle = <&rgmii_phy0>; > - phy-mode = "rgmii-id"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac0_miim > - &gmac0_tx_bus2 > - &gmac0_rx_bus2 > - &gmac0_rgmii_clk > - &gmac0_rgmii_bus>; > - status = "okay"; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; > - assigned-clock-rates = <0>, <125000000>; > - clock_in_out = "output"; > - phy-handle = <&rgmii_phy1>; > - phy-mode = "rgmii-id"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m1_miim > - &gmac1m1_tx_bus2 > - &gmac1m1_rx_bus2 > - &gmac1m1_rgmii_clk > - &gmac1m1_rgmii_bus>; > - status = "okay"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - #clock-cells = <1>; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; > - rockchip,system-power-controller; > - #sound-dai-cells = <0>; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - > - codec { > - mic-in-differential; > - }; > - }; > -}; > - > -&i2c1 { > - status = "okay"; > - > - touchscreen0: goodix@14 { > - compatible = "goodix,gt1151"; > - reg = <0x14>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; > - AVDD28-supply = <&vcc3v3_lcd0_n>; > - irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&touch_int &touch_rst>; > - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; > - VDDIO-supply = <&vcc3v3_lcd0_n>; > - }; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&i2s1_8ch { > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&mdio0 { > - rgmii_phy0: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - reset-assert-us = <20000>; > - reset-deassert-us = <100000>; > - reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; > - }; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - reset-assert-us = <20000>; > - reset-deassert-us = <100000>; > - reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; > - }; > -}; > - > -&pinctrl { > - display { > - vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en { > - rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>; > - }; > - vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en { > - rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; > - }; > - }; > - > - leds { > - led_work_en: led_work_en { > - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int: pmic_int { > - rockchip,pins = > - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - touchscreen { > - touch_int: touch_int { > - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - touch_rst: touch_rst { > - rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb { > - vcc5v0_usb_host_en: vcc5v0_usb_host_en { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - extcon = <&usb2phy0>; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-lubancat-2.dts b/arch/arm/dts/rk3568-lubancat-2.dts > deleted file mode 100644 > index a8a4cc190eb3..000000000000 > --- a/arch/arm/dts/rk3568-lubancat-2.dts > +++ /dev/null > @@ -1,730 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/* > - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. > - * Copyright (c) 2022 EmbedFire <embedfire@embedfire.com> > - */ > - > -/dts-v1/; > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3568.dtsi" > - > -/ { > - model = "EmbedFire LubanCat 2"; > - compatible = "embedfire,lubancat-2", "rockchip,rk3568"; > - > - aliases { > - ethernet0 = &gmac0; > - ethernet1 = &gmac1; > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - user_led: user-led { > - label = "user_led"; > - linux,default-trigger = "heartbeat"; > - default-state = "on"; > - gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&user_led_pin>; > - }; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - dc_5v: dc-5v-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "dc_5v"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_5v>; > - }; > - > - vcc3v3_m2_pcie: vcc3v3-m2-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "m2_pcie_3v3"; > - enable-active-high; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; > - pinctrl-0 = <&vcc3v3_m2_pcie_en>; > - pinctrl-names = "default"; > - startup-delay-us = <200000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc3v3_mini_pcie: vcc3v3-mini-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "minipcie_3v3"; > - enable-active-high; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; > - pinctrl-0 = <&vcc3v3_mini_pcie_en>; > - pinctrl-names = "default"; > - startup-delay-us = <5000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc5v0_usb20_host: vcc5v0-usb20-host-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb20_host"; > - enable-active-high; > - gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; > - pinctrl-0 = <&vcc5v0_usb20_host_en>; > - pinctrl-names = "default"; > - }; > - > - vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb30_host"; > - enable-active-high; > - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; > - pinctrl-0 = <&vcc5v0_usb30_host_en>; > - pinctrl-names = "default"; > - }; > - > - vcc5v0_otg_vbus: vcc5v0-otg-vbus-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_otg_vbus"; > - enable-active-high; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; > - pinctrl-0 = <&vcc5v0_otg_vbus_en>; > - pinctrl-names = "default"; > - }; > -}; > - > -&combphy0 { > - status = "okay"; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&combphy2 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - #clock-cells = <1>; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>; > - rockchip,system-power-controller; > - #sound-dai-cells = <0>; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-boot-on; > - regulator-always-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > -}; > - > -&i2s1_8ch { > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&gmac0 { > - phy-mode = "rgmii"; > - clock_in_out = "output"; > - > - snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - > - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; > - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac0_miim > - &gmac0_tx_bus2 > - &gmac0_rx_bus2 > - &gmac0_rgmii_clk > - &gmac0_rgmii_bus>; > - > - tx_delay = <0x22>; > - rx_delay = <0x0e>; > - > - phy-handle = <&rgmii_phy0>; > - status = "okay"; > -}; > - > -&mdio0 { > - rgmii_phy0: phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - }; > -}; > - > -&gmac1 { > - phy-mode = "rgmii"; > - clock_in_out = "output"; > - > - snps,reset-gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m1_miim > - &gmac1m1_tx_bus2 > - &gmac1m1_rx_bus2 > - &gmac1m1_rgmii_clk > - &gmac1m1_rgmii_bus>; > - > - tx_delay = <0x21>; > - rx_delay = <0x0e>; > - > - phy-handle = <&rgmii_phy1>; > - status = "okay"; > -}; > - > -&mdio1 { > - rgmii_phy1: phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - }; > -}; > - > -&gic { > - mbi-ranges = <94 31>, <229 31>, <289 31>; > -}; > - > -&pcie30phy { > - status = "okay"; > -}; > - > -&pcie3x2 { > - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_m2_pcie>; > - status = "okay"; > -}; > - > -&pcie2x1 { > - reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; > - disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_mini_pcie>; > - status = "okay"; > -}; > - > -&pmu_io_domains { > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&pwm8 { > - status = "okay"; > -}; > - > -&pwm9 { > - status = "disabled"; > -}; > - > -&pwm10 { > - status = "disabled"; > -}; > - > -&pwm14 { > - status = "disabled"; > -}; > - > -&spi3 { > - pinctrl-0 = <&spi3m1_pins>; > - status = "disabled"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&uart3 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart3m1_xfer>; > - status = "disabled"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&sdhci { > - assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>; > - assigned-clock-rates = <200000000>, <24000000>, <200000000>; > - bus-width = <8>; > - max-frequency = <200000000>; > - mmc-hs200-1_8v; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; > - supports-emmc; > - status = "okay"; > -}; > - > -&sdmmc0 { > - max-frequency = <150000000>; > - no-sdio; > - no-mmc; > - bus-width = <4>; > - cap-mmc-highspeed; > - cap-sd-highspeed; > - disable-wp; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - status = "okay"; > -}; > - > -/* USB OTG/USB Host_1 USB 2.0 Comb */ > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb30_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_otg_vbus>; > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -/* USB Host_2/USB Host_3 USB 2.0 Comb */ > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc5v0_usb20_host>; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -/* MULTI_PHY0 For SATA0, USB3.0 OTG Only USB2.0 */ > -&usb_host0_xhci { > - phys = <&usb2phy0_otg>; > - phy-names = "usb2-phy"; > - extcon = <&usb2phy0>; > - maximum-speed = "high-speed"; > - dr_mode = "host"; > - status = "okay"; > -}; > - > -&sata0 { > - status = "okay"; > -}; > - > -/* USB3.0 Host */ > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > - > -&pinctrl { > - leds { > - user_led_pin: user-status-led-pin { > - rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb { > - vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { > - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc5v0_usb30_host_en: vcc5v0-usb30-host-en { > - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc5v0_otg_vbus_en: vcc5v0-otg-vbus-en { > - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en { > - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en { > - rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int: pmic-int { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-nanopi-r5c.dts b/arch/arm/dts/rk3568-nanopi-r5c.dts > deleted file mode 100644 > index c718b8dbb9c6..000000000000 > --- a/arch/arm/dts/rk3568-nanopi-r5c.dts > +++ /dev/null > @@ -1,112 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > -/* > - * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. > - * (http://www.friendlyelec.com) > - * > - * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> > - */ > - > -/dts-v1/; > -#include "rk3568-nanopi-r5s.dtsi" > - > -/ { > - model = "FriendlyElec NanoPi R5C"; > - compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568"; > - > - gpio-keys { > - compatible = "gpio-keys"; > - pinctrl-names = "default"; > - pinctrl-0 = <&reset_button_pin>; > - > - button-reset { > - debounce-interval = <50>; > - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; > - label = "reset"; > - linux,code = <KEY_RESTART>; > - }; > - }; > - > - gpio-leds { > - compatible = "gpio-leds"; > - pinctrl-names = "default"; > - pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>; > - > - led-lan { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_LAN; > - gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; > - }; > - > - power_led: led-power { > - color = <LED_COLOR_ID_RED>; > - function = LED_FUNCTION_POWER; > - linux,default-trigger = "heartbeat"; > - gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>; > - }; > - > - led-wan { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_WAN; > - gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; > - }; > - > - led-wlan { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_WLAN; > - gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; > - }; > - }; > -}; > - > -&pcie2x1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie20_reset_pin>; > - reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; > - status = "okay"; > -}; > - > -&pcie3x1 { > - num-lanes = <1>; > - reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pcie3x2 { > - num-lanes = <1>; > - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pinctrl { > - gpio-leds { > - lan_led_pin: lan-led-pin { > - rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - power_led_pin: power-led-pin { > - rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - wan_led_pin: wan-led-pin { > - rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - wlan_led_pin: wlan-led-pin { > - rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie20_reset_pin: pcie20-reset-pin { > - rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - rockchip-key { > - reset_button_pin: reset-button-pin { > - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dts b/arch/arm/dts/rk3568-nanopi-r5s.dts > deleted file mode 100644 > index b6ad8328c7eb..000000000000 > --- a/arch/arm/dts/rk3568-nanopi-r5s.dts > +++ /dev/null > @@ -1,136 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > -/* > - * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. > - * (http://www.friendlyelec.com) > - * > - * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> > - */ > - > -/dts-v1/; > -#include "rk3568-nanopi-r5s.dtsi" > - > -/ { > - model = "FriendlyElec NanoPi R5S"; > - compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568"; > - > - aliases { > - ethernet0 = &gmac0; > - }; > - > - gpio-leds { > - compatible = "gpio-leds"; > - pinctrl-names = "default"; > - pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>; > - > - led-lan1 { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_LAN; > - function-enumerator = <1>; > - gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; > - }; > - > - led-lan2 { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_LAN; > - function-enumerator = <2>; > - gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>; > - }; > - > - power_led: led-power { > - color = <LED_COLOR_ID_RED>; > - function = LED_FUNCTION_POWER; > - linux,default-trigger = "heartbeat"; > - gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; > - }; > - > - led-wan { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_WAN; > - gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; > - }; > - }; > -}; > - > -&gmac0 { > - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; > - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; > - assigned-clock-rates = <0>, <125000000>; > - clock_in_out = "output"; > - phy-handle = <&rgmii_phy0>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac0_miim > - &gmac0_tx_bus2 > - &gmac0_rx_bus2 > - &gmac0_rgmii_clk > - &gmac0_rgmii_bus>; > - snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 15ms, 50ms for rtl8211f */ > - snps,reset-delays-us = <0 15000 50000>; > - tx_delay = <0x3c>; > - rx_delay = <0x2f>; > - status = "okay"; > -}; > - > -&mdio0 { > - rgmii_phy0: ethernet-phy@1 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <1>; > - pinctrl-0 = <ð_phy0_reset_pin>; > - pinctrl-names = "default"; > - }; > -}; > - > -&pcie2x1 { > - num-lanes = <1>; > - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; > - status = "okay"; > -}; > - > -&pcie30phy { > - data-lanes = <1 2>; > - status = "okay"; > -}; > - > -&pcie3x1 { > - num-lanes = <1>; > - reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pcie3x2 { > - num-lanes = <1>; > - num-ib-windows = <8>; > - num-ob-windows = <8>; > - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pinctrl { > - gmac0 { > - eth_phy0_reset_pin: eth-phy0-reset-pin { > - rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - gpio-leds { > - lan1_led_pin: lan1-led-pin { > - rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - lan2_led_pin: lan2-led-pin { > - rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - power_led_pin: power-led-pin { > - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - wan_led_pin: wan-led-pin { > - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dtsi b/arch/arm/dts/rk3568-nanopi-r5s.dtsi > deleted file mode 100644 > index 93189f830640..000000000000 > --- a/arch/arm/dts/rk3568-nanopi-r5s.dtsi > +++ /dev/null > @@ -1,587 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > -/* > - * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. > - * (http://www.friendlyelec.com) > - * > - * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> > - */ > - > -/dts-v1/; > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/input/input.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3568.dtsi" > - > -/ { > - aliases { > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - vdd_usbc: vdd-usbc-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vdd_usbc"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vdd_usbc>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vdd_usbc>; > - }; > - > - vcc3v3_pcie: vcc3v3-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_pcie"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - enable-active-high; > - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; > - startup-delay-us = <200000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc5v0_usb: vcc5v0-usb-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vdd_usbc>; > - }; > - > - vcc5v0_usb_host: vcc5v0-usb-host-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_host_en>; > - regulator-name = "vcc5v0_usb_host"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en>; > - regulator-name = "vcc5v0_usb_otg"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - pcie30_avdd0v9: pcie30-avdd0v9-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - pcie30_avdd1v8: pcie30-avdd1v8-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc3v3_sys>; > - }; > -}; > - > -&combphy0 { > - status = "okay"; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&combphy2 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>; > - rockchip,system-power-controller; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-min-microvolt = <950000>; > - regulator-max-microvolt = <950000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - > - }; > -}; > - > -&i2c5 { > - status = "okay"; > - > - hym8563: rtc@51 { > - compatible = "haoyu,hym8563"; > - reg = <0x51>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <0>; > - clock-output-names = "rtcic_32kout"; > - pinctrl-names = "default"; > - pinctrl-0 = <&hym8563_int>; > - wakeup-source; > - }; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&pcie30phy { > - data-lanes = <1 2>; > - status = "okay"; > -}; > - > -&pinctrl { > - hym8563 { > - hym8563_int: hym8563-int { > - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - pmic { > - pmic_int: pmic-int { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - usb { > - vcc5v0_usb_host_en: vcc5v0-usb-host-en { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc5v0_usb_otg_en: vcc5v0-usb-otg-en { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - max-frequency = <150000000>; > - no-sdio; > - no-mmc; > - bus-width = <4>; > - cap-mmc-highspeed; > - cap-sd-highspeed; > - disable-wp; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - extcon = <&usb2phy0>; > - dr_mode = "host"; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-odroid-m1.dts b/arch/arm/dts/rk3568-odroid-m1.dts > deleted file mode 100644 > index a337f547caf5..000000000000 > --- a/arch/arm/dts/rk3568-odroid-m1.dts > +++ /dev/null > @@ -1,741 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2022 Hardkernel Co., Ltd. > - * > - */ > - > -/dts-v1/; > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3568.dtsi" > - > -/ { > - model = "Hardkernel ODROID-M1"; > - compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568"; > - > - aliases { > - ethernet0 = &gmac0; > - i2c0 = &i2c3; > - i2c3 = &i2c0; > - mmc0 = &sdhci; > - mmc1 = &sdmmc0; > - serial0 = &uart1; > - serial1 = &uart0; > - }; > - > - chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - dc_12v: dc-12v-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "dc_12v"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - ir-receiver { > - compatible = "gpio-ir-receiver"; > - gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&ir_receiver_pin>; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led_power: led-0 { > - gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; > - function = LED_FUNCTION_POWER; > - color = <LED_COLOR_ID_RED>; > - default-state = "keep"; > - linux,default-trigger = "default-on"; > - pinctrl-names = "default"; > - pinctrl-0 = <&led_power_pin>; > - }; > - led_work: led-1 { > - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > - function = LED_FUNCTION_HEARTBEAT; > - color = <LED_COLOR_ID_BLUE>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&led_work_pin>; > - }; > - }; > - > - rk809-sound { > - compatible = "simple-audio-card"; > - pinctrl-names = "default"; > - pinctrl-0 = <&hp_det_pin>; > - simple-audio-card,name = "Analog RK817"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; > - simple-audio-card,mclk-fs = <256>; > - simple-audio-card,widgets = > - "Headphone", "Headphones", > - "Speaker", "Speaker"; > - simple-audio-card,routing = > - "Headphones", "HPOL", > - "Headphones", "HPOR", > - "Speaker", "SPKO"; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s1_8ch>; > - }; > - > - simple-audio-card,codec { > - sound-dai = <&rk809>; > - }; > - }; > - > - vcc3v3_pcie: vcc3v3-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_pcie"; > - enable-active-high; > - gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc3v3_pcie_en_pin>; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - startup-delay-us = <5000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_usb_host: vcc5v0-usb-host-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb_host"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_host_en_pin>; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb_otg"; > - enable-active-high; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en_pin>; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_sys>; > - }; > -}; > - > -&combphy0 { > - /* Used for USB3 */ > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&combphy1 { > - /* Used for USB3 */ > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&combphy2 { > - /* used for SATA */ > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gmac0 { > - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; > - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; > - assigned-clock-rates = <0>, <125000000>; > - clock_in_out = "output"; > - phy-handle = <&rgmii_phy0>; > - phy-mode = "rgmii"; > - phy-supply = <&vcc3v3_sys>; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac0_miim > - &gmac0_tx_bus2 > - &gmac0_rx_bus2 > - &gmac0_rgmii_clk > - &gmac0_rgmii_bus>; > - status = "okay"; > - > - tx_delay = <0x4f>; > - rx_delay = <0x2d>; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc3v3_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - #clock-cells = <1>; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; > - rockchip,system-power-controller; > - #sound-dai-cells = <0>; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-always-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-always-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&i2s1_8ch { > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&mdio0 { > - rgmii_phy0: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - reset-assert-us = <20000>; > - reset-deassert-us = <100000>; > - reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > - }; > -}; > - > -&pcie30phy { > - status = "okay"; > -}; > - > -&pcie3x2 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_reset_pin>; > - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pinctrl { > - fspi { > - fspi_dual_io_pins: fspi-dual-io-pins { > - rockchip,pins = > - /* fspi_clk */ > - <1 RK_PD0 1 &pcfg_pull_none>, > - /* fspi_cs0n */ > - <1 RK_PD3 1 &pcfg_pull_none>, > - /* fspi_d0 */ > - <1 RK_PD1 1 &pcfg_pull_none>, > - /* fspi_d1 */ > - <1 RK_PD2 1 &pcfg_pull_none>; > - }; > - }; > - > - ir-receiver { > - ir_receiver_pin: ir-receiver-pin { > - /* external pullup to VCC3V3_SYS */ > - rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - leds { > - led_power_pin: led-power-pin { > - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - led_work_pin: led-work-pin { > - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie_reset_pin: pcie-reset-pin { > - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin { > - rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - rk809 { > - hp_det_pin: hp-det-pin { > - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb { > - vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_3v3>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sata2 { > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr50; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&sfc { > - /* Dual I/O mode as the D2 pin conflicts with the eMMC */ > - pinctrl-0 = <&fspi_dual_io_pins>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "okay"; > - > - flash@0 { > - compatible = "jedec,spi-nor"; > - reg = <0>; > - spi-max-frequency = <100000000>; > - spi-rx-bus-width = <2>; > - spi-tx-bus-width = <1>; > - > - partitions { > - compatible = "fixed-partitions"; > - #address-cells = <1>; > - #size-cells = <1>; > - > - partition@0 { > - label = "SPL"; > - reg = <0x0 0xe0000>; > - }; > - partition@e0000 { > - label = "U-Boot Env"; > - reg = <0xe0000 0x20000>; > - }; > - partition@100000 { > - label = "U-Boot"; > - reg = <0x100000 0x200000>; > - }; > - partition@300000 { > - label = "splash"; > - reg = <0x300000 0x100000>; > - }; > - partition@400000 { > - label = "Filesystem"; > - reg = <0x400000 0xc00000>; > - }; > - }; > - }; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - dr_mode = "host"; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-pinctrl.dtsi b/arch/arm/dts/rk3568-pinctrl.dtsi > deleted file mode 100644 > index 0a979bfb63d9..000000000000 > --- a/arch/arm/dts/rk3568-pinctrl.dtsi > +++ /dev/null > @@ -1,3214 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. > - */ > - > -#include <dt-bindings/pinctrl/rockchip.h> > -#include "rockchip-pinconf.dtsi" > - > -/* > - * This file is auto generated by pin2dts tool, please keep these code > - * by adding changes at end of this file. > - */ > -&pinctrl { > - acodec { > - /omit-if-no-ref/ > - acodec_pins: acodec-pins { > - rockchip,pins = > - /* acodec_adc_sync */ > - <1 RK_PB1 5 &pcfg_pull_none>, > - /* acodec_adcclk */ > - <1 RK_PA1 5 &pcfg_pull_none>, > - /* acodec_adcdata */ > - <1 RK_PA0 5 &pcfg_pull_none>, > - /* acodec_dac_datal */ > - <1 RK_PA7 5 &pcfg_pull_none>, > - /* acodec_dac_datar */ > - <1 RK_PB0 5 &pcfg_pull_none>, > - /* acodec_dacclk */ > - <1 RK_PA3 5 &pcfg_pull_none>, > - /* acodec_dacsync */ > - <1 RK_PA5 5 &pcfg_pull_none>; > - }; > - }; > - > - audiopwm { > - /omit-if-no-ref/ > - audiopwm_lout: audiopwm-lout { > - rockchip,pins = > - /* audiopwm_lout */ > - <1 RK_PA0 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - audiopwm_loutn: audiopwm-loutn { > - rockchip,pins = > - /* audiopwm_loutn */ > - <1 RK_PA1 6 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - audiopwm_loutp: audiopwm-loutp { > - rockchip,pins = > - /* audiopwm_loutp */ > - <1 RK_PA0 6 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - audiopwm_rout: audiopwm-rout { > - rockchip,pins = > - /* audiopwm_rout */ > - <1 RK_PA1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - audiopwm_routn: audiopwm-routn { > - rockchip,pins = > - /* audiopwm_routn */ > - <1 RK_PA7 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - audiopwm_routp: audiopwm-routp { > - rockchip,pins = > - /* audiopwm_routp */ > - <1 RK_PA6 4 &pcfg_pull_none>; > - }; > - }; > - > - bt656 { > - /omit-if-no-ref/ > - bt656m0_pins: bt656m0-pins { > - rockchip,pins = > - /* bt656_clkm0 */ > - <3 RK_PA0 2 &pcfg_pull_none>, > - /* bt656_d0m0 */ > - <2 RK_PD0 2 &pcfg_pull_none>, > - /* bt656_d1m0 */ > - <2 RK_PD1 2 &pcfg_pull_none>, > - /* bt656_d2m0 */ > - <2 RK_PD2 2 &pcfg_pull_none>, > - /* bt656_d3m0 */ > - <2 RK_PD3 2 &pcfg_pull_none>, > - /* bt656_d4m0 */ > - <2 RK_PD4 2 &pcfg_pull_none>, > - /* bt656_d5m0 */ > - <2 RK_PD5 2 &pcfg_pull_none>, > - /* bt656_d6m0 */ > - <2 RK_PD6 2 &pcfg_pull_none>, > - /* bt656_d7m0 */ > - <2 RK_PD7 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - bt656m1_pins: bt656m1-pins { > - rockchip,pins = > - /* bt656_clkm1 */ > - <4 RK_PB4 5 &pcfg_pull_none>, > - /* bt656_d0m1 */ > - <3 RK_PC6 5 &pcfg_pull_none>, > - /* bt656_d1m1 */ > - <3 RK_PC7 5 &pcfg_pull_none>, > - /* bt656_d2m1 */ > - <3 RK_PD0 5 &pcfg_pull_none>, > - /* bt656_d3m1 */ > - <3 RK_PD1 5 &pcfg_pull_none>, > - /* bt656_d4m1 */ > - <3 RK_PD2 5 &pcfg_pull_none>, > - /* bt656_d5m1 */ > - <3 RK_PD3 5 &pcfg_pull_none>, > - /* bt656_d6m1 */ > - <3 RK_PD4 5 &pcfg_pull_none>, > - /* bt656_d7m1 */ > - <3 RK_PD5 5 &pcfg_pull_none>; > - }; > - }; > - > - bt1120 { > - /omit-if-no-ref/ > - bt1120_pins: bt1120-pins { > - rockchip,pins = > - /* bt1120_clk */ > - <3 RK_PA6 2 &pcfg_pull_none>, > - /* bt1120_d0 */ > - <3 RK_PA1 2 &pcfg_pull_none>, > - /* bt1120_d1 */ > - <3 RK_PA2 2 &pcfg_pull_none>, > - /* bt1120_d2 */ > - <3 RK_PA3 2 &pcfg_pull_none>, > - /* bt1120_d3 */ > - <3 RK_PA4 2 &pcfg_pull_none>, > - /* bt1120_d4 */ > - <3 RK_PA5 2 &pcfg_pull_none>, > - /* bt1120_d5 */ > - <3 RK_PA7 2 &pcfg_pull_none>, > - /* bt1120_d6 */ > - <3 RK_PB0 2 &pcfg_pull_none>, > - /* bt1120_d7 */ > - <3 RK_PB1 2 &pcfg_pull_none>, > - /* bt1120_d8 */ > - <3 RK_PB2 2 &pcfg_pull_none>, > - /* bt1120_d9 */ > - <3 RK_PB3 2 &pcfg_pull_none>, > - /* bt1120_d10 */ > - <3 RK_PB4 2 &pcfg_pull_none>, > - /* bt1120_d11 */ > - <3 RK_PB5 2 &pcfg_pull_none>, > - /* bt1120_d12 */ > - <3 RK_PB6 2 &pcfg_pull_none>, > - /* bt1120_d13 */ > - <3 RK_PC1 2 &pcfg_pull_none>, > - /* bt1120_d14 */ > - <3 RK_PC2 2 &pcfg_pull_none>, > - /* bt1120_d15 */ > - <3 RK_PC3 2 &pcfg_pull_none>; > - }; > - }; > - > - cam { > - /omit-if-no-ref/ > - cam_clkout0: cam-clkout0 { > - rockchip,pins = > - /* cam_clkout0 */ > - <4 RK_PA7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - cam_clkout1: cam-clkout1 { > - rockchip,pins = > - /* cam_clkout1 */ > - <4 RK_PB0 1 &pcfg_pull_none>; > - }; > - }; > - > - can0 { > - /omit-if-no-ref/ > - can0m0_pins: can0m0-pins { > - rockchip,pins = > - /* can0_rxm0 */ > - <0 RK_PB4 2 &pcfg_pull_none>, > - /* can0_txm0 */ > - <0 RK_PB3 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - can0m1_pins: can0m1-pins { > - rockchip,pins = > - /* can0_rxm1 */ > - <2 RK_PA2 4 &pcfg_pull_none>, > - /* can0_txm1 */ > - <2 RK_PA1 4 &pcfg_pull_none>; > - }; > - }; > - > - can1 { > - /omit-if-no-ref/ > - can1m0_pins: can1m0-pins { > - rockchip,pins = > - /* can1_rxm0 */ > - <1 RK_PA0 3 &pcfg_pull_none>, > - /* can1_txm0 */ > - <1 RK_PA1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - can1m1_pins: can1m1-pins { > - rockchip,pins = > - /* can1_rxm1 */ > - <4 RK_PC2 3 &pcfg_pull_none>, > - /* can1_txm1 */ > - <4 RK_PC3 3 &pcfg_pull_none>; > - }; > - }; > - > - can2 { > - /omit-if-no-ref/ > - can2m0_pins: can2m0-pins { > - rockchip,pins = > - /* can2_rxm0 */ > - <4 RK_PB4 3 &pcfg_pull_none>, > - /* can2_txm0 */ > - <4 RK_PB5 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - can2m1_pins: can2m1-pins { > - rockchip,pins = > - /* can2_rxm1 */ > - <2 RK_PB1 4 &pcfg_pull_none>, > - /* can2_txm1 */ > - <2 RK_PB2 4 &pcfg_pull_none>; > - }; > - }; > - > - cif { > - /omit-if-no-ref/ > - cif_clk: cif-clk { > - rockchip,pins = > - /* cif_clkout */ > - <4 RK_PC0 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - cif_dvp_clk: cif-dvp-clk { > - rockchip,pins = > - /* cif_clkin */ > - <4 RK_PC1 1 &pcfg_pull_none>, > - /* cif_href */ > - <4 RK_PB6 1 &pcfg_pull_none>, > - /* cif_vsync */ > - <4 RK_PB7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - cif_dvp_bus16: cif-dvp-bus16 { > - rockchip,pins = > - /* cif_d8 */ > - <3 RK_PD6 1 &pcfg_pull_none>, > - /* cif_d9 */ > - <3 RK_PD7 1 &pcfg_pull_none>, > - /* cif_d10 */ > - <4 RK_PA0 1 &pcfg_pull_none>, > - /* cif_d11 */ > - <4 RK_PA1 1 &pcfg_pull_none>, > - /* cif_d12 */ > - <4 RK_PA2 1 &pcfg_pull_none>, > - /* cif_d13 */ > - <4 RK_PA3 1 &pcfg_pull_none>, > - /* cif_d14 */ > - <4 RK_PA4 1 &pcfg_pull_none>, > - /* cif_d15 */ > - <4 RK_PA5 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - cif_dvp_bus8: cif-dvp-bus8 { > - rockchip,pins = > - /* cif_d0 */ > - <3 RK_PC6 1 &pcfg_pull_none>, > - /* cif_d1 */ > - <3 RK_PC7 1 &pcfg_pull_none>, > - /* cif_d2 */ > - <3 RK_PD0 1 &pcfg_pull_none>, > - /* cif_d3 */ > - <3 RK_PD1 1 &pcfg_pull_none>, > - /* cif_d4 */ > - <3 RK_PD2 1 &pcfg_pull_none>, > - /* cif_d5 */ > - <3 RK_PD3 1 &pcfg_pull_none>, > - /* cif_d6 */ > - <3 RK_PD4 1 &pcfg_pull_none>, > - /* cif_d7 */ > - <3 RK_PD5 1 &pcfg_pull_none>; > - }; > - }; > - > - clk32k { > - /omit-if-no-ref/ > - clk32k_in: clk32k-in { > - rockchip,pins = > - /* clk32k_in */ > - <0 RK_PB0 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - clk32k_out0: clk32k-out0 { > - rockchip,pins = > - /* clk32k_out0 */ > - <0 RK_PB0 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - clk32k_out1: clk32k-out1 { > - rockchip,pins = > - /* clk32k_out1 */ > - <2 RK_PC6 1 &pcfg_pull_none>; > - }; > - }; > - > - cpu { > - /omit-if-no-ref/ > - cpu_pins: cpu-pins { > - rockchip,pins = > - /* cpu_avs */ > - <0 RK_PB7 2 &pcfg_pull_none>; > - }; > - }; > - > - ebc { > - /omit-if-no-ref/ > - ebc_extern: ebc-extern { > - rockchip,pins = > - /* ebc_sdce1 */ > - <4 RK_PA7 2 &pcfg_pull_none>, > - /* ebc_sdce2 */ > - <4 RK_PB0 2 &pcfg_pull_none>, > - /* ebc_sdce3 */ > - <4 RK_PB1 2 &pcfg_pull_none>, > - /* ebc_sdshr */ > - <4 RK_PB5 2 &pcfg_pull_none>, > - /* ebc_vcom */ > - <4 RK_PB2 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - ebc_pins: ebc-pins { > - rockchip,pins = > - /* ebc_gdclk */ > - <4 RK_PC0 2 &pcfg_pull_none>, > - /* ebc_gdoe */ > - <4 RK_PB3 2 &pcfg_pull_none>, > - /* ebc_gdsp */ > - <4 RK_PB4 2 &pcfg_pull_none>, > - /* ebc_sdce0 */ > - <4 RK_PA6 2 &pcfg_pull_none>, > - /* ebc_sdclk */ > - <4 RK_PC1 2 &pcfg_pull_none>, > - /* ebc_sddo0 */ > - <3 RK_PC6 2 &pcfg_pull_none>, > - /* ebc_sddo1 */ > - <3 RK_PC7 2 &pcfg_pull_none>, > - /* ebc_sddo2 */ > - <3 RK_PD0 2 &pcfg_pull_none>, > - /* ebc_sddo3 */ > - <3 RK_PD1 2 &pcfg_pull_none>, > - /* ebc_sddo4 */ > - <3 RK_PD2 2 &pcfg_pull_none>, > - /* ebc_sddo5 */ > - <3 RK_PD3 2 &pcfg_pull_none>, > - /* ebc_sddo6 */ > - <3 RK_PD4 2 &pcfg_pull_none>, > - /* ebc_sddo7 */ > - <3 RK_PD5 2 &pcfg_pull_none>, > - /* ebc_sddo8 */ > - <3 RK_PD6 2 &pcfg_pull_none>, > - /* ebc_sddo9 */ > - <3 RK_PD7 2 &pcfg_pull_none>, > - /* ebc_sddo10 */ > - <4 RK_PA0 2 &pcfg_pull_none>, > - /* ebc_sddo11 */ > - <4 RK_PA1 2 &pcfg_pull_none>, > - /* ebc_sddo12 */ > - <4 RK_PA2 2 &pcfg_pull_none>, > - /* ebc_sddo13 */ > - <4 RK_PA3 2 &pcfg_pull_none>, > - /* ebc_sddo14 */ > - <4 RK_PA4 2 &pcfg_pull_none>, > - /* ebc_sddo15 */ > - <4 RK_PA5 2 &pcfg_pull_none>, > - /* ebc_sdle */ > - <4 RK_PB6 2 &pcfg_pull_none>, > - /* ebc_sdoe */ > - <4 RK_PB7 2 &pcfg_pull_none>; > - }; > - }; > - > - edpdp { > - /omit-if-no-ref/ > - edpdpm0_pins: edpdpm0-pins { > - rockchip,pins = > - /* edpdp_hpdinm0 */ > - <4 RK_PC4 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - edpdpm1_pins: edpdpm1-pins { > - rockchip,pins = > - /* edpdp_hpdinm1 */ > - <0 RK_PC2 2 &pcfg_pull_none>; > - }; > - }; > - > - emmc { > - /omit-if-no-ref/ > - emmc_rstnout: emmc-rstnout { > - rockchip,pins = > - /* emmc_rstn */ > - <1 RK_PC7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - emmc_bus8: emmc-bus8 { > - rockchip,pins = > - /* emmc_d0 */ > - <1 RK_PB4 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d1 */ > - <1 RK_PB5 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d2 */ > - <1 RK_PB6 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d3 */ > - <1 RK_PB7 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d4 */ > - <1 RK_PC0 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d5 */ > - <1 RK_PC1 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d6 */ > - <1 RK_PC2 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d7 */ > - <1 RK_PC3 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - emmc_clk: emmc-clk { > - rockchip,pins = > - /* emmc_clkout */ > - <1 RK_PC5 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - emmc_cmd: emmc-cmd { > - rockchip,pins = > - /* emmc_cmd */ > - <1 RK_PC4 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - emmc_datastrobe: emmc-datastrobe { > - rockchip,pins = > - /* emmc_datastrobe */ > - <1 RK_PC6 1 &pcfg_pull_none>; > - }; > - }; > - > - eth0 { > - /omit-if-no-ref/ > - eth0_pins: eth0-pins { > - rockchip,pins = > - /* eth0_refclko25m */ > - <2 RK_PC1 2 &pcfg_pull_none>; > - }; > - }; > - > - eth1 { > - /omit-if-no-ref/ > - eth1m0_pins: eth1m0-pins { > - rockchip,pins = > - /* eth1_refclko25mm0 */ > - <3 RK_PB0 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - eth1m1_pins: eth1m1-pins { > - rockchip,pins = > - /* eth1_refclko25mm1 */ > - <4 RK_PB3 3 &pcfg_pull_none>; > - }; > - }; > - > - flash { > - /omit-if-no-ref/ > - flash_pins: flash-pins { > - rockchip,pins = > - /* flash_ale */ > - <1 RK_PD0 2 &pcfg_pull_none>, > - /* flash_cle */ > - <1 RK_PC6 3 &pcfg_pull_none>, > - /* flash_cs0n */ > - <1 RK_PD3 2 &pcfg_pull_none>, > - /* flash_cs1n */ > - <1 RK_PD4 2 &pcfg_pull_none>, > - /* flash_d0 */ > - <1 RK_PB4 2 &pcfg_pull_none>, > - /* flash_d1 */ > - <1 RK_PB5 2 &pcfg_pull_none>, > - /* flash_d2 */ > - <1 RK_PB6 2 &pcfg_pull_none>, > - /* flash_d3 */ > - <1 RK_PB7 2 &pcfg_pull_none>, > - /* flash_d4 */ > - <1 RK_PC0 2 &pcfg_pull_none>, > - /* flash_d5 */ > - <1 RK_PC1 2 &pcfg_pull_none>, > - /* flash_d6 */ > - <1 RK_PC2 2 &pcfg_pull_none>, > - /* flash_d7 */ > - <1 RK_PC3 2 &pcfg_pull_none>, > - /* flash_dqs */ > - <1 RK_PC5 2 &pcfg_pull_none>, > - /* flash_rdn */ > - <1 RK_PD2 2 &pcfg_pull_none>, > - /* flash_rdy */ > - <1 RK_PD1 2 &pcfg_pull_none>, > - /* flash_volsel */ > - <0 RK_PA7 1 &pcfg_pull_none>, > - /* flash_wpn */ > - <1 RK_PC7 3 &pcfg_pull_none>, > - /* flash_wrn */ > - <1 RK_PC4 2 &pcfg_pull_none>; > - }; > - }; > - > - fspi { > - /omit-if-no-ref/ > - fspi_pins: fspi-pins { > - rockchip,pins = > - /* fspi_clk */ > - <1 RK_PD0 1 &pcfg_pull_none>, > - /* fspi_cs0n */ > - <1 RK_PD3 1 &pcfg_pull_none>, > - /* fspi_d0 */ > - <1 RK_PD1 1 &pcfg_pull_none>, > - /* fspi_d1 */ > - <1 RK_PD2 1 &pcfg_pull_none>, > - /* fspi_d2 */ > - <1 RK_PC7 2 &pcfg_pull_none>, > - /* fspi_d3 */ > - <1 RK_PD4 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - fspi_cs1: fspi-cs1 { > - rockchip,pins = > - /* fspi_cs1n */ > - <1 RK_PC6 2 &pcfg_pull_up>; > - }; > - }; > - > - gmac0 { > - /omit-if-no-ref/ > - gmac0_miim: gmac0-miim { > - rockchip,pins = > - /* gmac0_mdc */ > - <2 RK_PC3 2 &pcfg_pull_none>, > - /* gmac0_mdio */ > - <2 RK_PC4 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac0_clkinout: gmac0-clkinout { > - rockchip,pins = > - /* gmac0_mclkinout */ > - <2 RK_PC2 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac0_rx_er: gmac0-rx-er { > - rockchip,pins = > - /* gmac0_rxer */ > - <2 RK_PC5 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac0_rx_bus2: gmac0-rx-bus2 { > - rockchip,pins = > - /* gmac0_rxd0 */ > - <2 RK_PB6 1 &pcfg_pull_none>, > - /* gmac0_rxd1 */ > - <2 RK_PB7 2 &pcfg_pull_none>, > - /* gmac0_rxdvcrs */ > - <2 RK_PC0 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac0_tx_bus2: gmac0-tx-bus2 { > - rockchip,pins = > - /* gmac0_txd0 */ > - <2 RK_PB3 1 &pcfg_pull_none_drv_level_2>, > - /* gmac0_txd1 */ > - <2 RK_PB4 1 &pcfg_pull_none_drv_level_2>, > - /* gmac0_txen */ > - <2 RK_PB5 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac0_rgmii_clk: gmac0-rgmii-clk { > - rockchip,pins = > - /* gmac0_rxclk */ > - <2 RK_PA5 2 &pcfg_pull_none>, > - /* gmac0_txclk */ > - <2 RK_PB0 2 &pcfg_pull_none_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - gmac0_rgmii_bus: gmac0-rgmii-bus { > - rockchip,pins = > - /* gmac0_rxd2 */ > - <2 RK_PA3 2 &pcfg_pull_none>, > - /* gmac0_rxd3 */ > - <2 RK_PA4 2 &pcfg_pull_none>, > - /* gmac0_txd2 */ > - <2 RK_PA6 2 &pcfg_pull_none_drv_level_2>, > - /* gmac0_txd3 */ > - <2 RK_PA7 2 &pcfg_pull_none_drv_level_2>; > - }; > - }; > - > - gmac1 { > - /omit-if-no-ref/ > - gmac1m0_miim: gmac1m0-miim { > - rockchip,pins = > - /* gmac1_mdcm0 */ > - <3 RK_PC4 3 &pcfg_pull_none>, > - /* gmac1_mdiom0 */ > - <3 RK_PC5 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_clkinout: gmac1m0-clkinout { > - rockchip,pins = > - /* gmac1_mclkinoutm0 */ > - <3 RK_PC0 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_rx_er: gmac1m0-rx-er { > - rockchip,pins = > - /* gmac1_rxerm0 */ > - <3 RK_PB4 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_rx_bus2: gmac1m0-rx-bus2 { > - rockchip,pins = > - /* gmac1_rxd0m0 */ > - <3 RK_PB1 3 &pcfg_pull_none>, > - /* gmac1_rxd1m0 */ > - <3 RK_PB2 3 &pcfg_pull_none>, > - /* gmac1_rxdvcrsm0 */ > - <3 RK_PB3 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_tx_bus2: gmac1m0-tx-bus2 { > - rockchip,pins = > - /* gmac1_txd0m0 */ > - <3 RK_PB5 3 &pcfg_pull_none_drv_level_2>, > - /* gmac1_txd1m0 */ > - <3 RK_PB6 3 &pcfg_pull_none_drv_level_2>, > - /* gmac1_txenm0 */ > - <3 RK_PB7 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_rgmii_clk: gmac1m0-rgmii-clk { > - rockchip,pins = > - /* gmac1_rxclkm0 */ > - <3 RK_PA7 3 &pcfg_pull_none>, > - /* gmac1_txclkm0 */ > - <3 RK_PA6 3 &pcfg_pull_none_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_rgmii_bus: gmac1m0-rgmii-bus { > - rockchip,pins = > - /* gmac1_rxd2m0 */ > - <3 RK_PA4 3 &pcfg_pull_none>, > - /* gmac1_rxd3m0 */ > - <3 RK_PA5 3 &pcfg_pull_none>, > - /* gmac1_txd2m0 */ > - <3 RK_PA2 3 &pcfg_pull_none_drv_level_2>, > - /* gmac1_txd3m0 */ > - <3 RK_PA3 3 &pcfg_pull_none_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_miim: gmac1m1-miim { > - rockchip,pins = > - /* gmac1_mdcm1 */ > - <4 RK_PB6 3 &pcfg_pull_none>, > - /* gmac1_mdiom1 */ > - <4 RK_PB7 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_clkinout: gmac1m1-clkinout { > - rockchip,pins = > - /* gmac1_mclkinoutm1 */ > - <4 RK_PC1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_rx_er: gmac1m1-rx-er { > - rockchip,pins = > - /* gmac1_rxerm1 */ > - <4 RK_PB2 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_rx_bus2: gmac1m1-rx-bus2 { > - rockchip,pins = > - /* gmac1_rxd0m1 */ > - <4 RK_PA7 3 &pcfg_pull_none>, > - /* gmac1_rxd1m1 */ > - <4 RK_PB0 3 &pcfg_pull_none>, > - /* gmac1_rxdvcrsm1 */ > - <4 RK_PB1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_tx_bus2: gmac1m1-tx-bus2 { > - rockchip,pins = > - /* gmac1_txd0m1 */ > - <4 RK_PA4 3 &pcfg_pull_none_drv_level_2>, > - /* gmac1_txd1m1 */ > - <4 RK_PA5 3 &pcfg_pull_none_drv_level_2>, > - /* gmac1_txenm1 */ > - <4 RK_PA6 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_rgmii_clk: gmac1m1-rgmii-clk { > - rockchip,pins = > - /* gmac1_rxclkm1 */ > - <4 RK_PA3 3 &pcfg_pull_none>, > - /* gmac1_txclkm1 */ > - <4 RK_PA0 3 &pcfg_pull_none_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_rgmii_bus: gmac1m1-rgmii-bus { > - rockchip,pins = > - /* gmac1_rxd2m1 */ > - <4 RK_PA1 3 &pcfg_pull_none>, > - /* gmac1_rxd3m1 */ > - <4 RK_PA2 3 &pcfg_pull_none>, > - /* gmac1_txd2m1 */ > - <3 RK_PD6 3 &pcfg_pull_none_drv_level_2>, > - /* gmac1_txd3m1 */ > - <3 RK_PD7 3 &pcfg_pull_none_drv_level_2>; > - }; > - }; > - > - gpu { > - /omit-if-no-ref/ > - gpu_pins: gpu-pins { > - rockchip,pins = > - /* gpu_avs */ > - <0 RK_PC0 2 &pcfg_pull_none>, > - /* gpu_pwren */ > - <0 RK_PA6 4 &pcfg_pull_none>; > - }; > - }; > - > - hdmitx { > - /omit-if-no-ref/ > - hdmitxm0_cec: hdmitxm0-cec { > - rockchip,pins = > - /* hdmitxm0_cec */ > - <4 RK_PD1 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - hdmitxm1_cec: hdmitxm1-cec { > - rockchip,pins = > - /* hdmitxm1_cec */ > - <0 RK_PC7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - hdmitx_scl: hdmitx-scl { > - rockchip,pins = > - /* hdmitx_scl */ > - <4 RK_PC7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - hdmitx_sda: hdmitx-sda { > - rockchip,pins = > - /* hdmitx_sda */ > - <4 RK_PD0 1 &pcfg_pull_none>; > - }; > - }; > - > - i2c0 { > - /omit-if-no-ref/ > - i2c0_xfer: i2c0-xfer { > - rockchip,pins = > - /* i2c0_scl */ > - <0 RK_PB1 1 &pcfg_pull_none_smt>, > - /* i2c0_sda */ > - <0 RK_PB2 1 &pcfg_pull_none_smt>; > - }; > - }; > - > - i2c1 { > - /omit-if-no-ref/ > - i2c1_xfer: i2c1-xfer { > - rockchip,pins = > - /* i2c1_scl */ > - <0 RK_PB3 1 &pcfg_pull_none_smt>, > - /* i2c1_sda */ > - <0 RK_PB4 1 &pcfg_pull_none_smt>; > - }; > - }; > - > - i2c2 { > - /omit-if-no-ref/ > - i2c2m0_xfer: i2c2m0-xfer { > - rockchip,pins = > - /* i2c2_sclm0 */ > - <0 RK_PB5 1 &pcfg_pull_none_smt>, > - /* i2c2_sdam0 */ > - <0 RK_PB6 1 &pcfg_pull_none_smt>; > - }; > - > - /omit-if-no-ref/ > - i2c2m1_xfer: i2c2m1-xfer { > - rockchip,pins = > - /* i2c2_sclm1 */ > - <4 RK_PB5 1 &pcfg_pull_none_smt>, > - /* i2c2_sdam1 */ > - <4 RK_PB4 1 &pcfg_pull_none_smt>; > - }; > - }; > - > - i2c3 { > - /omit-if-no-ref/ > - i2c3m0_xfer: i2c3m0-xfer { > - rockchip,pins = > - /* i2c3_sclm0 */ > - <1 RK_PA1 1 &pcfg_pull_none_smt>, > - /* i2c3_sdam0 */ > - <1 RK_PA0 1 &pcfg_pull_none_smt>; > - }; > - > - /omit-if-no-ref/ > - i2c3m1_xfer: i2c3m1-xfer { > - rockchip,pins = > - /* i2c3_sclm1 */ > - <3 RK_PB5 4 &pcfg_pull_none_smt>, > - /* i2c3_sdam1 */ > - <3 RK_PB6 4 &pcfg_pull_none_smt>; > - }; > - }; > - > - i2c4 { > - /omit-if-no-ref/ > - i2c4m0_xfer: i2c4m0-xfer { > - rockchip,pins = > - /* i2c4_sclm0 */ > - <4 RK_PB3 1 &pcfg_pull_none_smt>, > - /* i2c4_sdam0 */ > - <4 RK_PB2 1 &pcfg_pull_none_smt>; > - }; > - > - /omit-if-no-ref/ > - i2c4m1_xfer: i2c4m1-xfer { > - rockchip,pins = > - /* i2c4_sclm1 */ > - <2 RK_PB2 2 &pcfg_pull_none_smt>, > - /* i2c4_sdam1 */ > - <2 RK_PB1 2 &pcfg_pull_none_smt>; > - }; > - }; > - > - i2c5 { > - /omit-if-no-ref/ > - i2c5m0_xfer: i2c5m0-xfer { > - rockchip,pins = > - /* i2c5_sclm0 */ > - <3 RK_PB3 4 &pcfg_pull_none_smt>, > - /* i2c5_sdam0 */ > - <3 RK_PB4 4 &pcfg_pull_none_smt>; > - }; > - > - /omit-if-no-ref/ > - i2c5m1_xfer: i2c5m1-xfer { > - rockchip,pins = > - /* i2c5_sclm1 */ > - <4 RK_PC7 2 &pcfg_pull_none_smt>, > - /* i2c5_sdam1 */ > - <4 RK_PD0 2 &pcfg_pull_none_smt>; > - }; > - }; > - > - i2s1 { > - /omit-if-no-ref/ > - i2s1m0_lrckrx: i2s1m0-lrckrx { > - rockchip,pins = > - /* i2s1m0_lrckrx */ > - <1 RK_PA6 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_lrcktx: i2s1m0-lrcktx { > - rockchip,pins = > - /* i2s1m0_lrcktx */ > - <1 RK_PA5 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_mclk: i2s1m0-mclk { > - rockchip,pins = > - /* i2s1m0_mclk */ > - <1 RK_PA2 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sclkrx: i2s1m0-sclkrx { > - rockchip,pins = > - /* i2s1m0_sclkrx */ > - <1 RK_PA4 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sclktx: i2s1m0-sclktx { > - rockchip,pins = > - /* i2s1m0_sclktx */ > - <1 RK_PA3 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdi0: i2s1m0-sdi0 { > - rockchip,pins = > - /* i2s1m0_sdi0 */ > - <1 RK_PB3 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdi1: i2s1m0-sdi1 { > - rockchip,pins = > - /* i2s1m0_sdi1 */ > - <1 RK_PB2 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdi2: i2s1m0-sdi2 { > - rockchip,pins = > - /* i2s1m0_sdi2 */ > - <1 RK_PB1 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdi3: i2s1m0-sdi3 { > - rockchip,pins = > - /* i2s1m0_sdi3 */ > - <1 RK_PB0 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdo0: i2s1m0-sdo0 { > - rockchip,pins = > - /* i2s1m0_sdo0 */ > - <1 RK_PA7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdo1: i2s1m0-sdo1 { > - rockchip,pins = > - /* i2s1m0_sdo1 */ > - <1 RK_PB0 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdo2: i2s1m0-sdo2 { > - rockchip,pins = > - /* i2s1m0_sdo2 */ > - <1 RK_PB1 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdo3: i2s1m0-sdo3 { > - rockchip,pins = > - /* i2s1m0_sdo3 */ > - <1 RK_PB2 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_lrckrx: i2s1m1-lrckrx { > - rockchip,pins = > - /* i2s1m1_lrckrx */ > - <4 RK_PA7 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_lrcktx: i2s1m1-lrcktx { > - rockchip,pins = > - /* i2s1m1_lrcktx */ > - <3 RK_PD0 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_mclk: i2s1m1-mclk { > - rockchip,pins = > - /* i2s1m1_mclk */ > - <3 RK_PC6 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sclkrx: i2s1m1-sclkrx { > - rockchip,pins = > - /* i2s1m1_sclkrx */ > - <4 RK_PA6 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sclktx: i2s1m1-sclktx { > - rockchip,pins = > - /* i2s1m1_sclktx */ > - <3 RK_PC7 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdi0: i2s1m1-sdi0 { > - rockchip,pins = > - /* i2s1m1_sdi0 */ > - <3 RK_PD2 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdi1: i2s1m1-sdi1 { > - rockchip,pins = > - /* i2s1m1_sdi1 */ > - <3 RK_PD3 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdi2: i2s1m1-sdi2 { > - rockchip,pins = > - /* i2s1m1_sdi2 */ > - <3 RK_PD4 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdi3: i2s1m1-sdi3 { > - rockchip,pins = > - /* i2s1m1_sdi3 */ > - <3 RK_PD5 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdo0: i2s1m1-sdo0 { > - rockchip,pins = > - /* i2s1m1_sdo0 */ > - <3 RK_PD1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdo1: i2s1m1-sdo1 { > - rockchip,pins = > - /* i2s1m1_sdo1 */ > - <4 RK_PB0 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdo2: i2s1m1-sdo2 { > - rockchip,pins = > - /* i2s1m1_sdo2 */ > - <4 RK_PB1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdo3: i2s1m1-sdo3 { > - rockchip,pins = > - /* i2s1m1_sdo3 */ > - <4 RK_PB5 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_lrckrx: i2s1m2-lrckrx { > - rockchip,pins = > - /* i2s1m2_lrckrx */ > - <3 RK_PC5 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_lrcktx: i2s1m2-lrcktx { > - rockchip,pins = > - /* i2s1m2_lrcktx */ > - <2 RK_PD2 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_mclk: i2s1m2-mclk { > - rockchip,pins = > - /* i2s1m2_mclk */ > - <2 RK_PD0 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sclkrx: i2s1m2-sclkrx { > - rockchip,pins = > - /* i2s1m2_sclkrx */ > - <3 RK_PC3 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sclktx: i2s1m2-sclktx { > - rockchip,pins = > - /* i2s1m2_sclktx */ > - <2 RK_PD1 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdi0: i2s1m2-sdi0 { > - rockchip,pins = > - /* i2s1m2_sdi0 */ > - <2 RK_PD3 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdi1: i2s1m2-sdi1 { > - rockchip,pins = > - /* i2s1m2_sdi1 */ > - <2 RK_PD4 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdi2: i2s1m2-sdi2 { > - rockchip,pins = > - /* i2s1m2_sdi2 */ > - <2 RK_PD5 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdi3: i2s1m2-sdi3 { > - rockchip,pins = > - /* i2s1m2_sdi3 */ > - <2 RK_PD6 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdo0: i2s1m2-sdo0 { > - rockchip,pins = > - /* i2s1m2_sdo0 */ > - <2 RK_PD7 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdo1: i2s1m2-sdo1 { > - rockchip,pins = > - /* i2s1m2_sdo1 */ > - <3 RK_PA0 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdo2: i2s1m2-sdo2 { > - rockchip,pins = > - /* i2s1m2_sdo2 */ > - <3 RK_PC1 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdo3: i2s1m2-sdo3 { > - rockchip,pins = > - /* i2s1m2_sdo3 */ > - <3 RK_PC2 5 &pcfg_pull_none>; > - }; > - }; > - > - i2s2 { > - /omit-if-no-ref/ > - i2s2m0_lrckrx: i2s2m0-lrckrx { > - rockchip,pins = > - /* i2s2m0_lrckrx */ > - <2 RK_PC0 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m0_lrcktx: i2s2m0-lrcktx { > - rockchip,pins = > - /* i2s2m0_lrcktx */ > - <2 RK_PC3 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m0_mclk: i2s2m0-mclk { > - rockchip,pins = > - /* i2s2m0_mclk */ > - <2 RK_PC1 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m0_sclkrx: i2s2m0-sclkrx { > - rockchip,pins = > - /* i2s2m0_sclkrx */ > - <2 RK_PB7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m0_sclktx: i2s2m0-sclktx { > - rockchip,pins = > - /* i2s2m0_sclktx */ > - <2 RK_PC2 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m0_sdi: i2s2m0-sdi { > - rockchip,pins = > - /* i2s2m0_sdi */ > - <2 RK_PC5 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m0_sdo: i2s2m0-sdo { > - rockchip,pins = > - /* i2s2m0_sdo */ > - <2 RK_PC4 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_lrckrx: i2s2m1-lrckrx { > - rockchip,pins = > - /* i2s2m1_lrckrx */ > - <4 RK_PA5 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_lrcktx: i2s2m1-lrcktx { > - rockchip,pins = > - /* i2s2m1_lrcktx */ > - <4 RK_PA4 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_mclk: i2s2m1-mclk { > - rockchip,pins = > - /* i2s2m1_mclk */ > - <4 RK_PB6 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_sclkrx: i2s2m1-sclkrx { > - rockchip,pins = > - /* i2s2m1_sclkrx */ > - <4 RK_PC1 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_sclktx: i2s2m1-sclktx { > - rockchip,pins = > - /* i2s2m1_sclktx */ > - <4 RK_PB7 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_sdi: i2s2m1-sdi { > - rockchip,pins = > - /* i2s2m1_sdi */ > - <4 RK_PB2 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_sdo: i2s2m1-sdo { > - rockchip,pins = > - /* i2s2m1_sdo */ > - <4 RK_PB3 5 &pcfg_pull_none>; > - }; > - }; > - > - i2s3 { > - /omit-if-no-ref/ > - i2s3m0_lrck: i2s3m0-lrck { > - rockchip,pins = > - /* i2s3m0_lrck */ > - <3 RK_PA4 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m0_mclk: i2s3m0-mclk { > - rockchip,pins = > - /* i2s3m0_mclk */ > - <3 RK_PA2 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m0_sclk: i2s3m0-sclk { > - rockchip,pins = > - /* i2s3m0_sclk */ > - <3 RK_PA3 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m0_sdi: i2s3m0-sdi { > - rockchip,pins = > - /* i2s3m0_sdi */ > - <3 RK_PA6 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m0_sdo: i2s3m0-sdo { > - rockchip,pins = > - /* i2s3m0_sdo */ > - <3 RK_PA5 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m1_lrck: i2s3m1-lrck { > - rockchip,pins = > - /* i2s3m1_lrck */ > - <4 RK_PC4 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m1_mclk: i2s3m1-mclk { > - rockchip,pins = > - /* i2s3m1_mclk */ > - <4 RK_PC2 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m1_sclk: i2s3m1-sclk { > - rockchip,pins = > - /* i2s3m1_sclk */ > - <4 RK_PC3 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m1_sdi: i2s3m1-sdi { > - rockchip,pins = > - /* i2s3m1_sdi */ > - <4 RK_PC6 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m1_sdo: i2s3m1-sdo { > - rockchip,pins = > - /* i2s3m1_sdo */ > - <4 RK_PC5 5 &pcfg_pull_none>; > - }; > - }; > - > - isp { > - /omit-if-no-ref/ > - isp_pins: isp-pins { > - rockchip,pins = > - /* isp_flashtrigin */ > - <4 RK_PB4 4 &pcfg_pull_none>, > - /* isp_flashtrigout */ > - <4 RK_PA6 1 &pcfg_pull_none>, > - /* isp_prelighttrig */ > - <4 RK_PB1 1 &pcfg_pull_none>; > - }; > - }; > - > - jtag { > - /omit-if-no-ref/ > - jtag_pins: jtag-pins { > - rockchip,pins = > - /* jtag_tck */ > - <1 RK_PD7 2 &pcfg_pull_none>, > - /* jtag_tms */ > - <2 RK_PA0 2 &pcfg_pull_none>; > - }; > - }; > - > - lcdc { > - /omit-if-no-ref/ > - lcdc_ctl: lcdc-ctl { > - rockchip,pins = > - /* lcdc_clk */ > - <3 RK_PA0 1 &pcfg_pull_none>, > - /* lcdc_d0 */ > - <2 RK_PD0 1 &pcfg_pull_none>, > - /* lcdc_d1 */ > - <2 RK_PD1 1 &pcfg_pull_none>, > - /* lcdc_d2 */ > - <2 RK_PD2 1 &pcfg_pull_none>, > - /* lcdc_d3 */ > - <2 RK_PD3 1 &pcfg_pull_none>, > - /* lcdc_d4 */ > - <2 RK_PD4 1 &pcfg_pull_none>, > - /* lcdc_d5 */ > - <2 RK_PD5 1 &pcfg_pull_none>, > - /* lcdc_d6 */ > - <2 RK_PD6 1 &pcfg_pull_none>, > - /* lcdc_d7 */ > - <2 RK_PD7 1 &pcfg_pull_none>, > - /* lcdc_d8 */ > - <3 RK_PA1 1 &pcfg_pull_none>, > - /* lcdc_d9 */ > - <3 RK_PA2 1 &pcfg_pull_none>, > - /* lcdc_d10 */ > - <3 RK_PA3 1 &pcfg_pull_none>, > - /* lcdc_d11 */ > - <3 RK_PA4 1 &pcfg_pull_none>, > - /* lcdc_d12 */ > - <3 RK_PA5 1 &pcfg_pull_none>, > - /* lcdc_d13 */ > - <3 RK_PA6 1 &pcfg_pull_none>, > - /* lcdc_d14 */ > - <3 RK_PA7 1 &pcfg_pull_none>, > - /* lcdc_d15 */ > - <3 RK_PB0 1 &pcfg_pull_none>, > - /* lcdc_d16 */ > - <3 RK_PB1 1 &pcfg_pull_none>, > - /* lcdc_d17 */ > - <3 RK_PB2 1 &pcfg_pull_none>, > - /* lcdc_d18 */ > - <3 RK_PB3 1 &pcfg_pull_none>, > - /* lcdc_d19 */ > - <3 RK_PB4 1 &pcfg_pull_none>, > - /* lcdc_d20 */ > - <3 RK_PB5 1 &pcfg_pull_none>, > - /* lcdc_d21 */ > - <3 RK_PB6 1 &pcfg_pull_none>, > - /* lcdc_d22 */ > - <3 RK_PB7 1 &pcfg_pull_none>, > - /* lcdc_d23 */ > - <3 RK_PC0 1 &pcfg_pull_none>, > - /* lcdc_den */ > - <3 RK_PC3 1 &pcfg_pull_none>, > - /* lcdc_hsync */ > - <3 RK_PC1 1 &pcfg_pull_none>, > - /* lcdc_vsync */ > - <3 RK_PC2 1 &pcfg_pull_none>; > - }; > - }; > - > - mcu { > - /omit-if-no-ref/ > - mcu_pins: mcu-pins { > - rockchip,pins = > - /* mcu_jtagtck */ > - <0 RK_PB4 4 &pcfg_pull_none>, > - /* mcu_jtagtdi */ > - <0 RK_PC1 4 &pcfg_pull_none>, > - /* mcu_jtagtdo */ > - <0 RK_PB3 4 &pcfg_pull_none>, > - /* mcu_jtagtms */ > - <0 RK_PC2 4 &pcfg_pull_none>, > - /* mcu_jtagtrstn */ > - <0 RK_PC3 4 &pcfg_pull_none>; > - }; > - }; > - > - npu { > - /omit-if-no-ref/ > - npu_pins: npu-pins { > - rockchip,pins = > - /* npu_avs */ > - <0 RK_PC1 2 &pcfg_pull_none>; > - }; > - }; > - > - pcie20 { > - /omit-if-no-ref/ > - pcie20m0_pins: pcie20m0-pins { > - rockchip,pins = > - /* pcie20_clkreqnm0 */ > - <0 RK_PA5 3 &pcfg_pull_none>, > - /* pcie20_perstnm0 */ > - <0 RK_PB6 3 &pcfg_pull_none>, > - /* pcie20_wakenm0 */ > - <0 RK_PB5 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie20m1_pins: pcie20m1-pins { > - rockchip,pins = > - /* pcie20_clkreqnm1 */ > - <2 RK_PD0 4 &pcfg_pull_none>, > - /* pcie20_perstnm1 */ > - <3 RK_PC1 4 &pcfg_pull_none>, > - /* pcie20_wakenm1 */ > - <2 RK_PD1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie20m2_pins: pcie20m2-pins { > - rockchip,pins = > - /* pcie20_clkreqnm2 */ > - <1 RK_PB0 4 &pcfg_pull_none>, > - /* pcie20_perstnm2 */ > - <1 RK_PB2 4 &pcfg_pull_none>, > - /* pcie20_wakenm2 */ > - <1 RK_PB1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie20_buttonrstn: pcie20-buttonrstn { > - rockchip,pins = > - /* pcie20_buttonrstn */ > - <0 RK_PB4 3 &pcfg_pull_none>; > - }; > - }; > - > - pcie30x1 { > - /omit-if-no-ref/ > - pcie30x1m0_pins: pcie30x1m0-pins { > - rockchip,pins = > - /* pcie30x1_clkreqnm0 */ > - <0 RK_PA4 3 &pcfg_pull_none>, > - /* pcie30x1_perstnm0 */ > - <0 RK_PC3 3 &pcfg_pull_none>, > - /* pcie30x1_wakenm0 */ > - <0 RK_PC2 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie30x1m1_pins: pcie30x1m1-pins { > - rockchip,pins = > - /* pcie30x1_clkreqnm1 */ > - <2 RK_PD2 4 &pcfg_pull_none>, > - /* pcie30x1_perstnm1 */ > - <3 RK_PA1 4 &pcfg_pull_none>, > - /* pcie30x1_wakenm1 */ > - <2 RK_PD3 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie30x1m2_pins: pcie30x1m2-pins { > - rockchip,pins = > - /* pcie30x1_clkreqnm2 */ > - <1 RK_PA5 4 &pcfg_pull_none>, > - /* pcie30x1_perstnm2 */ > - <1 RK_PA2 4 &pcfg_pull_none>, > - /* pcie30x1_wakenm2 */ > - <1 RK_PA3 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie30x1_buttonrstn: pcie30x1-buttonrstn { > - rockchip,pins = > - /* pcie30x1_buttonrstn */ > - <0 RK_PB3 3 &pcfg_pull_none>; > - }; > - }; > - > - pcie30x2 { > - /omit-if-no-ref/ > - pcie30x2m0_pins: pcie30x2m0-pins { > - rockchip,pins = > - /* pcie30x2_clkreqnm0 */ > - <0 RK_PA6 2 &pcfg_pull_none>, > - /* pcie30x2_perstnm0 */ > - <0 RK_PC6 3 &pcfg_pull_none>, > - /* pcie30x2_wakenm0 */ > - <0 RK_PC5 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie30x2m1_pins: pcie30x2m1-pins { > - rockchip,pins = > - /* pcie30x2_clkreqnm1 */ > - <2 RK_PD4 4 &pcfg_pull_none>, > - /* pcie30x2_perstnm1 */ > - <2 RK_PD6 4 &pcfg_pull_none>, > - /* pcie30x2_wakenm1 */ > - <2 RK_PD5 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie30x2m2_pins: pcie30x2m2-pins { > - rockchip,pins = > - /* pcie30x2_clkreqnm2 */ > - <4 RK_PC2 4 &pcfg_pull_none>, > - /* pcie30x2_perstnm2 */ > - <4 RK_PC4 4 &pcfg_pull_none>, > - /* pcie30x2_wakenm2 */ > - <4 RK_PC3 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie30x2_buttonrstn: pcie30x2-buttonrstn { > - rockchip,pins = > - /* pcie30x2_buttonrstn */ > - <0 RK_PB0 3 &pcfg_pull_none>; > - }; > - }; > - > - pdm { > - /omit-if-no-ref/ > - pdmm0_clk: pdmm0-clk { > - rockchip,pins = > - /* pdm_clk0m0 */ > - <1 RK_PA6 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm0_clk1: pdmm0-clk1 { > - rockchip,pins = > - /* pdmm0_clk1 */ > - <1 RK_PA4 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm0_sdi0: pdmm0-sdi0 { > - rockchip,pins = > - /* pdmm0_sdi0 */ > - <1 RK_PB3 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm0_sdi1: pdmm0-sdi1 { > - rockchip,pins = > - /* pdmm0_sdi1 */ > - <1 RK_PB2 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm0_sdi2: pdmm0-sdi2 { > - rockchip,pins = > - /* pdmm0_sdi2 */ > - <1 RK_PB1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm0_sdi3: pdmm0-sdi3 { > - rockchip,pins = > - /* pdmm0_sdi3 */ > - <1 RK_PB0 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm1_clk: pdmm1-clk { > - rockchip,pins = > - /* pdm_clk0m1 */ > - <3 RK_PD6 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm1_clk1: pdmm1-clk1 { > - rockchip,pins = > - /* pdmm1_clk1 */ > - <4 RK_PA0 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm1_sdi0: pdmm1-sdi0 { > - rockchip,pins = > - /* pdmm1_sdi0 */ > - <3 RK_PD7 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm1_sdi1: pdmm1-sdi1 { > - rockchip,pins = > - /* pdmm1_sdi1 */ > - <4 RK_PA1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm1_sdi2: pdmm1-sdi2 { > - rockchip,pins = > - /* pdmm1_sdi2 */ > - <4 RK_PA2 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm1_sdi3: pdmm1-sdi3 { > - rockchip,pins = > - /* pdmm1_sdi3 */ > - <4 RK_PA3 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm2_clk1: pdmm2-clk1 { > - rockchip,pins = > - /* pdmm2_clk1 */ > - <3 RK_PC4 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm2_sdi0: pdmm2-sdi0 { > - rockchip,pins = > - /* pdmm2_sdi0 */ > - <3 RK_PB3 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm2_sdi1: pdmm2-sdi1 { > - rockchip,pins = > - /* pdmm2_sdi1 */ > - <3 RK_PB4 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm2_sdi2: pdmm2-sdi2 { > - rockchip,pins = > - /* pdmm2_sdi2 */ > - <3 RK_PB7 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm2_sdi3: pdmm2-sdi3 { > - rockchip,pins = > - /* pdmm2_sdi3 */ > - <3 RK_PC0 5 &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - /omit-if-no-ref/ > - pmic_pins: pmic-pins { > - rockchip,pins = > - /* pmic_sleep */ > - <0 RK_PA2 1 &pcfg_pull_none>; > - }; > - }; > - > - pmu { > - /omit-if-no-ref/ > - pmu_pins: pmu-pins { > - rockchip,pins = > - /* pmu_debug0 */ > - <0 RK_PA5 4 &pcfg_pull_none>, > - /* pmu_debug1 */ > - <0 RK_PA6 3 &pcfg_pull_none>, > - /* pmu_debug2 */ > - <0 RK_PC4 4 &pcfg_pull_none>, > - /* pmu_debug3 */ > - <0 RK_PC5 4 &pcfg_pull_none>, > - /* pmu_debug4 */ > - <0 RK_PC6 4 &pcfg_pull_none>, > - /* pmu_debug5 */ > - <0 RK_PC7 4 &pcfg_pull_none>; > - }; > - }; > - > - pwm0 { > - /omit-if-no-ref/ > - pwm0m0_pins: pwm0m0-pins { > - rockchip,pins = > - /* pwm0_m0 */ > - <0 RK_PB7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm0m1_pins: pwm0m1-pins { > - rockchip,pins = > - /* pwm0_m1 */ > - <0 RK_PC7 2 &pcfg_pull_none>; > - }; > - }; > - > - pwm1 { > - /omit-if-no-ref/ > - pwm1m0_pins: pwm1m0-pins { > - rockchip,pins = > - /* pwm1_m0 */ > - <0 RK_PC0 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm1m1_pins: pwm1m1-pins { > - rockchip,pins = > - /* pwm1_m1 */ > - <0 RK_PB5 4 &pcfg_pull_none>; > - }; > - }; > - > - pwm2 { > - /omit-if-no-ref/ > - pwm2m0_pins: pwm2m0-pins { > - rockchip,pins = > - /* pwm2_m0 */ > - <0 RK_PC1 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm2m1_pins: pwm2m1-pins { > - rockchip,pins = > - /* pwm2_m1 */ > - <0 RK_PB6 4 &pcfg_pull_none>; > - }; > - }; > - > - pwm3 { > - /omit-if-no-ref/ > - pwm3_pins: pwm3-pins { > - rockchip,pins = > - /* pwm3_ir */ > - <0 RK_PC2 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm4 { > - /omit-if-no-ref/ > - pwm4_pins: pwm4-pins { > - rockchip,pins = > - /* pwm4 */ > - <0 RK_PC3 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm5 { > - /omit-if-no-ref/ > - pwm5_pins: pwm5-pins { > - rockchip,pins = > - /* pwm5 */ > - <0 RK_PC4 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm6 { > - /omit-if-no-ref/ > - pwm6_pins: pwm6-pins { > - rockchip,pins = > - /* pwm6 */ > - <0 RK_PC5 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm7 { > - /omit-if-no-ref/ > - pwm7_pins: pwm7-pins { > - rockchip,pins = > - /* pwm7_ir */ > - <0 RK_PC6 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm8 { > - /omit-if-no-ref/ > - pwm8m0_pins: pwm8m0-pins { > - rockchip,pins = > - /* pwm8_m0 */ > - <3 RK_PB1 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm8m1_pins: pwm8m1-pins { > - rockchip,pins = > - /* pwm8_m1 */ > - <1 RK_PD5 4 &pcfg_pull_none>; > - }; > - }; > - > - pwm9 { > - /omit-if-no-ref/ > - pwm9m0_pins: pwm9m0-pins { > - rockchip,pins = > - /* pwm9_m0 */ > - <3 RK_PB2 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm9m1_pins: pwm9m1-pins { > - rockchip,pins = > - /* pwm9_m1 */ > - <1 RK_PD6 4 &pcfg_pull_none>; > - }; > - }; > - > - pwm10 { > - /omit-if-no-ref/ > - pwm10m0_pins: pwm10m0-pins { > - rockchip,pins = > - /* pwm10_m0 */ > - <3 RK_PB5 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm10m1_pins: pwm10m1-pins { > - rockchip,pins = > - /* pwm10_m1 */ > - <2 RK_PA1 2 &pcfg_pull_none>; > - }; > - }; > - > - pwm11 { > - /omit-if-no-ref/ > - pwm11m0_pins: pwm11m0-pins { > - rockchip,pins = > - /* pwm11_irm0 */ > - <3 RK_PB6 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm11m1_pins: pwm11m1-pins { > - rockchip,pins = > - /* pwm11_irm1 */ > - <4 RK_PC0 3 &pcfg_pull_none>; > - }; > - }; > - > - pwm12 { > - /omit-if-no-ref/ > - pwm12m0_pins: pwm12m0-pins { > - rockchip,pins = > - /* pwm12_m0 */ > - <3 RK_PB7 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm12m1_pins: pwm12m1-pins { > - rockchip,pins = > - /* pwm12_m1 */ > - <4 RK_PC5 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm13 { > - /omit-if-no-ref/ > - pwm13m0_pins: pwm13m0-pins { > - rockchip,pins = > - /* pwm13_m0 */ > - <3 RK_PC0 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm13m1_pins: pwm13m1-pins { > - rockchip,pins = > - /* pwm13_m1 */ > - <4 RK_PC6 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm14 { > - /omit-if-no-ref/ > - pwm14m0_pins: pwm14m0-pins { > - rockchip,pins = > - /* pwm14_m0 */ > - <3 RK_PC4 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm14m1_pins: pwm14m1-pins { > - rockchip,pins = > - /* pwm14_m1 */ > - <4 RK_PC2 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm15 { > - /omit-if-no-ref/ > - pwm15m0_pins: pwm15m0-pins { > - rockchip,pins = > - /* pwm15_irm0 */ > - <3 RK_PC5 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm15m1_pins: pwm15m1-pins { > - rockchip,pins = > - /* pwm15_irm1 */ > - <4 RK_PC3 1 &pcfg_pull_none>; > - }; > - }; > - > - refclk { > - /omit-if-no-ref/ > - refclk_pins: refclk-pins { > - rockchip,pins = > - /* refclk_ou */ > - <0 RK_PA0 1 &pcfg_pull_none>; > - }; > - }; > - > - sata { > - /omit-if-no-ref/ > - sata_pins: sata-pins { > - rockchip,pins = > - /* sata_cpdet */ > - <0 RK_PA4 2 &pcfg_pull_none>, > - /* sata_cppod */ > - <0 RK_PA6 1 &pcfg_pull_none>, > - /* sata_mpswitch */ > - <0 RK_PA5 2 &pcfg_pull_none>; > - }; > - }; > - > - sata0 { > - /omit-if-no-ref/ > - sata0_pins: sata0-pins { > - rockchip,pins = > - /* sata0_actled */ > - <4 RK_PC6 3 &pcfg_pull_none>; > - }; > - }; > - > - sata1 { > - /omit-if-no-ref/ > - sata1_pins: sata1-pins { > - rockchip,pins = > - /* sata1_actled */ > - <4 RK_PC5 3 &pcfg_pull_none>; > - }; > - }; > - > - sata2 { > - /omit-if-no-ref/ > - sata2_pins: sata2-pins { > - rockchip,pins = > - /* sata2_actled */ > - <4 RK_PC4 3 &pcfg_pull_none>; > - }; > - }; > - > - scr { > - /omit-if-no-ref/ > - scr_pins: scr-pins { > - rockchip,pins = > - /* scr_clk */ > - <1 RK_PA2 3 &pcfg_pull_none>, > - /* scr_det */ > - <1 RK_PA7 3 &pcfg_pull_up>, > - /* scr_io */ > - <1 RK_PA3 3 &pcfg_pull_up>, > - /* scr_rst */ > - <1 RK_PA5 3 &pcfg_pull_none>; > - }; > - }; > - > - sdmmc0 { > - /omit-if-no-ref/ > - sdmmc0_bus4: sdmmc0-bus4 { > - rockchip,pins = > - /* sdmmc0_d0 */ > - <1 RK_PD5 1 &pcfg_pull_up_drv_level_2>, > - /* sdmmc0_d1 */ > - <1 RK_PD6 1 &pcfg_pull_up_drv_level_2>, > - /* sdmmc0_d2 */ > - <1 RK_PD7 1 &pcfg_pull_up_drv_level_2>, > - /* sdmmc0_d3 */ > - <2 RK_PA0 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc0_clk: sdmmc0-clk { > - rockchip,pins = > - /* sdmmc0_clk */ > - <2 RK_PA2 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc0_cmd: sdmmc0-cmd { > - rockchip,pins = > - /* sdmmc0_cmd */ > - <2 RK_PA1 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc0_det: sdmmc0-det { > - rockchip,pins = > - /* sdmmc0_det */ > - <0 RK_PA4 1 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - sdmmc0_pwren: sdmmc0-pwren { > - rockchip,pins = > - /* sdmmc0_pwren */ > - <0 RK_PA5 1 &pcfg_pull_none>; > - }; > - }; > - > - sdmmc1 { > - /omit-if-no-ref/ > - sdmmc1_bus4: sdmmc1-bus4 { > - rockchip,pins = > - /* sdmmc1_d0 */ > - <2 RK_PA3 1 &pcfg_pull_up_drv_level_2>, > - /* sdmmc1_d1 */ > - <2 RK_PA4 1 &pcfg_pull_up_drv_level_2>, > - /* sdmmc1_d2 */ > - <2 RK_PA5 1 &pcfg_pull_up_drv_level_2>, > - /* sdmmc1_d3 */ > - <2 RK_PA6 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc1_clk: sdmmc1-clk { > - rockchip,pins = > - /* sdmmc1_clk */ > - <2 RK_PB0 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc1_cmd: sdmmc1-cmd { > - rockchip,pins = > - /* sdmmc1_cmd */ > - <2 RK_PA7 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc1_det: sdmmc1-det { > - rockchip,pins = > - /* sdmmc1_det */ > - <2 RK_PB2 1 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - sdmmc1_pwren: sdmmc1-pwren { > - rockchip,pins = > - /* sdmmc1_pwren */ > - <2 RK_PB1 1 &pcfg_pull_none>; > - }; > - }; > - > - sdmmc2 { > - /omit-if-no-ref/ > - sdmmc2m0_bus4: sdmmc2m0-bus4 { > - rockchip,pins = > - /* sdmmc2_d0m0 */ > - <3 RK_PC6 3 &pcfg_pull_up_drv_level_2>, > - /* sdmmc2_d1m0 */ > - <3 RK_PC7 3 &pcfg_pull_up_drv_level_2>, > - /* sdmmc2_d2m0 */ > - <3 RK_PD0 3 &pcfg_pull_up_drv_level_2>, > - /* sdmmc2_d3m0 */ > - <3 RK_PD1 3 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m0_clk: sdmmc2m0-clk { > - rockchip,pins = > - /* sdmmc2_clkm0 */ > - <3 RK_PD3 3 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m0_cmd: sdmmc2m0-cmd { > - rockchip,pins = > - /* sdmmc2_cmdm0 */ > - <3 RK_PD2 3 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m0_det: sdmmc2m0-det { > - rockchip,pins = > - /* sdmmc2_detm0 */ > - <3 RK_PD4 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m0_pwren: sdmmc2m0-pwren { > - rockchip,pins = > - /* sdmmc2m0_pwren */ > - <3 RK_PD5 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m1_bus4: sdmmc2m1-bus4 { > - rockchip,pins = > - /* sdmmc2_d0m1 */ > - <3 RK_PA1 5 &pcfg_pull_up_drv_level_2>, > - /* sdmmc2_d1m1 */ > - <3 RK_PA2 5 &pcfg_pull_up_drv_level_2>, > - /* sdmmc2_d2m1 */ > - <3 RK_PA3 5 &pcfg_pull_up_drv_level_2>, > - /* sdmmc2_d3m1 */ > - <3 RK_PA4 5 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m1_clk: sdmmc2m1-clk { > - rockchip,pins = > - /* sdmmc2_clkm1 */ > - <3 RK_PA6 5 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m1_cmd: sdmmc2m1-cmd { > - rockchip,pins = > - /* sdmmc2_cmdm1 */ > - <3 RK_PA5 5 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m1_det: sdmmc2m1-det { > - rockchip,pins = > - /* sdmmc2_detm1 */ > - <3 RK_PA7 4 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m1_pwren: sdmmc2m1-pwren { > - rockchip,pins = > - /* sdmmc2m1_pwren */ > - <3 RK_PB0 4 &pcfg_pull_none>; > - }; > - }; > - > - spdif { > - /omit-if-no-ref/ > - spdifm0_tx: spdifm0-tx { > - rockchip,pins = > - /* spdifm0_tx */ > - <1 RK_PA4 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spdifm1_tx: spdifm1-tx { > - rockchip,pins = > - /* spdifm1_tx */ > - <3 RK_PC5 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spdifm2_tx: spdifm2-tx { > - rockchip,pins = > - /* spdifm2_tx */ > - <4 RK_PC4 2 &pcfg_pull_none>; > - }; > - }; > - > - spi0 { > - /omit-if-no-ref/ > - spi0m0_pins: spi0m0-pins { > - rockchip,pins = > - /* spi0_clkm0 */ > - <0 RK_PB5 2 &pcfg_pull_none>, > - /* spi0_misom0 */ > - <0 RK_PC5 2 &pcfg_pull_none>, > - /* spi0_mosim0 */ > - <0 RK_PB6 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi0m0_cs0: spi0m0-cs0 { > - rockchip,pins = > - /* spi0_cs0m0 */ > - <0 RK_PC6 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi0m0_cs1: spi0m0-cs1 { > - rockchip,pins = > - /* spi0_cs1m0 */ > - <0 RK_PC4 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi0m1_pins: spi0m1-pins { > - rockchip,pins = > - /* spi0_clkm1 */ > - <2 RK_PD3 3 &pcfg_pull_none>, > - /* spi0_misom1 */ > - <2 RK_PD0 3 &pcfg_pull_none>, > - /* spi0_mosim1 */ > - <2 RK_PD1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi0m1_cs0: spi0m1-cs0 { > - rockchip,pins = > - /* spi0_cs0m1 */ > - <2 RK_PD2 3 &pcfg_pull_none>; > - }; > - }; > - > - spi1 { > - /omit-if-no-ref/ > - spi1m0_pins: spi1m0-pins { > - rockchip,pins = > - /* spi1_clkm0 */ > - <2 RK_PB5 3 &pcfg_pull_none>, > - /* spi1_misom0 */ > - <2 RK_PB6 3 &pcfg_pull_none>, > - /* spi1_mosim0 */ > - <2 RK_PB7 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi1m0_cs0: spi1m0-cs0 { > - rockchip,pins = > - /* spi1_cs0m0 */ > - <2 RK_PC0 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi1m0_cs1: spi1m0-cs1 { > - rockchip,pins = > - /* spi1_cs1m0 */ > - <2 RK_PC6 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi1m1_pins: spi1m1-pins { > - rockchip,pins = > - /* spi1_clkm1 */ > - <3 RK_PC3 3 &pcfg_pull_none>, > - /* spi1_misom1 */ > - <3 RK_PC2 3 &pcfg_pull_none>, > - /* spi1_mosim1 */ > - <3 RK_PC1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi1m1_cs0: spi1m1-cs0 { > - rockchip,pins = > - /* spi1_cs0m1 */ > - <3 RK_PA1 3 &pcfg_pull_none>; > - }; > - }; > - > - spi2 { > - /omit-if-no-ref/ > - spi2m0_pins: spi2m0-pins { > - rockchip,pins = > - /* spi2_clkm0 */ > - <2 RK_PC1 4 &pcfg_pull_none>, > - /* spi2_misom0 */ > - <2 RK_PC2 4 &pcfg_pull_none>, > - /* spi2_mosim0 */ > - <2 RK_PC3 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi2m0_cs0: spi2m0-cs0 { > - rockchip,pins = > - /* spi2_cs0m0 */ > - <2 RK_PC4 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi2m0_cs1: spi2m0-cs1 { > - rockchip,pins = > - /* spi2_cs1m0 */ > - <2 RK_PC5 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi2m1_pins: spi2m1-pins { > - rockchip,pins = > - /* spi2_clkm1 */ > - <3 RK_PA0 3 &pcfg_pull_none>, > - /* spi2_misom1 */ > - <2 RK_PD7 3 &pcfg_pull_none>, > - /* spi2_mosim1 */ > - <2 RK_PD6 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi2m1_cs0: spi2m1-cs0 { > - rockchip,pins = > - /* spi2_cs0m1 */ > - <2 RK_PD5 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi2m1_cs1: spi2m1-cs1 { > - rockchip,pins = > - /* spi2_cs1m1 */ > - <2 RK_PD4 3 &pcfg_pull_none>; > - }; > - }; > - > - spi3 { > - /omit-if-no-ref/ > - spi3m0_pins: spi3m0-pins { > - rockchip,pins = > - /* spi3_clkm0 */ > - <4 RK_PB3 4 &pcfg_pull_none>, > - /* spi3_misom0 */ > - <4 RK_PB0 4 &pcfg_pull_none>, > - /* spi3_mosim0 */ > - <4 RK_PB2 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi3m0_cs0: spi3m0-cs0 { > - rockchip,pins = > - /* spi3_cs0m0 */ > - <4 RK_PA6 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi3m0_cs1: spi3m0-cs1 { > - rockchip,pins = > - /* spi3_cs1m0 */ > - <4 RK_PA7 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi3m1_pins: spi3m1-pins { > - rockchip,pins = > - /* spi3_clkm1 */ > - <4 RK_PC2 2 &pcfg_pull_none>, > - /* spi3_misom1 */ > - <4 RK_PC5 2 &pcfg_pull_none>, > - /* spi3_mosim1 */ > - <4 RK_PC3 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi3m1_cs0: spi3m1-cs0 { > - rockchip,pins = > - /* spi3_cs0m1 */ > - <4 RK_PC6 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi3m1_cs1: spi3m1-cs1 { > - rockchip,pins = > - /* spi3_cs1m1 */ > - <4 RK_PD1 2 &pcfg_pull_none>; > - }; > - }; > - > - tsadc { > - /omit-if-no-ref/ > - tsadcm0_shut: tsadcm0-shut { > - rockchip,pins = > - /* tsadcm0_shut */ > - <0 RK_PA1 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - tsadcm1_shut: tsadcm1-shut { > - rockchip,pins = > - /* tsadcm1_shut */ > - <0 RK_PA2 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - tsadc_shutorg: tsadc-shutorg { > - rockchip,pins = > - /* tsadc_shutorg */ > - <0 RK_PA1 2 &pcfg_pull_none>; > - }; > - }; > - > - uart0 { > - /omit-if-no-ref/ > - uart0_xfer: uart0-xfer { > - rockchip,pins = > - /* uart0_rx */ > - <0 RK_PC0 3 &pcfg_pull_up>, > - /* uart0_tx */ > - <0 RK_PC1 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart0_ctsn: uart0-ctsn { > - rockchip,pins = > - /* uart0_ctsn */ > - <0 RK_PC7 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart0_rtsn: uart0-rtsn { > - rockchip,pins = > - /* uart0_rtsn */ > - <0 RK_PC4 3 &pcfg_pull_none>; > - }; > - }; > - > - uart1 { > - /omit-if-no-ref/ > - uart1m0_xfer: uart1m0-xfer { > - rockchip,pins = > - /* uart1_rxm0 */ > - <2 RK_PB3 2 &pcfg_pull_up>, > - /* uart1_txm0 */ > - <2 RK_PB4 2 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart1m0_ctsn: uart1m0-ctsn { > - rockchip,pins = > - /* uart1m0_ctsn */ > - <2 RK_PB6 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart1m0_rtsn: uart1m0-rtsn { > - rockchip,pins = > - /* uart1m0_rtsn */ > - <2 RK_PB5 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart1m1_xfer: uart1m1-xfer { > - rockchip,pins = > - /* uart1_rxm1 */ > - <3 RK_PD7 4 &pcfg_pull_up>, > - /* uart1_txm1 */ > - <3 RK_PD6 4 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart1m1_ctsn: uart1m1-ctsn { > - rockchip,pins = > - /* uart1m1_ctsn */ > - <4 RK_PC1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart1m1_rtsn: uart1m1-rtsn { > - rockchip,pins = > - /* uart1m1_rtsn */ > - <4 RK_PB6 4 &pcfg_pull_none>; > - }; > - }; > - > - uart2 { > - /omit-if-no-ref/ > - uart2m0_xfer: uart2m0-xfer { > - rockchip,pins = > - /* uart2_rxm0 */ > - <0 RK_PD0 1 &pcfg_pull_up>, > - /* uart2_txm0 */ > - <0 RK_PD1 1 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart2m1_xfer: uart2m1-xfer { > - rockchip,pins = > - /* uart2_rxm1 */ > - <1 RK_PD6 2 &pcfg_pull_up>, > - /* uart2_txm1 */ > - <1 RK_PD5 2 &pcfg_pull_up>; > - }; > - }; > - > - uart3 { > - /omit-if-no-ref/ > - uart3m0_xfer: uart3m0-xfer { > - rockchip,pins = > - /* uart3_rxm0 */ > - <1 RK_PA0 2 &pcfg_pull_up>, > - /* uart3_txm0 */ > - <1 RK_PA1 2 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart3m0_ctsn: uart3m0-ctsn { > - rockchip,pins = > - /* uart3m0_ctsn */ > - <1 RK_PA3 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart3m0_rtsn: uart3m0-rtsn { > - rockchip,pins = > - /* uart3m0_rtsn */ > - <1 RK_PA2 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart3m1_xfer: uart3m1-xfer { > - rockchip,pins = > - /* uart3_rxm1 */ > - <3 RK_PC0 4 &pcfg_pull_up>, > - /* uart3_txm1 */ > - <3 RK_PB7 4 &pcfg_pull_up>; > - }; > - }; > - > - uart4 { > - /omit-if-no-ref/ > - uart4m0_xfer: uart4m0-xfer { > - rockchip,pins = > - /* uart4_rxm0 */ > - <1 RK_PA4 2 &pcfg_pull_up>, > - /* uart4_txm0 */ > - <1 RK_PA6 2 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart4m0_ctsn: uart4m0-ctsn { > - rockchip,pins = > - /* uart4m0_ctsn */ > - <1 RK_PA7 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart4m0_rtsn: uart4m0-rtsn { > - rockchip,pins = > - /* uart4m0_rtsn */ > - <1 RK_PA5 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart4m1_xfer: uart4m1-xfer { > - rockchip,pins = > - /* uart4_rxm1 */ > - <3 RK_PB1 4 &pcfg_pull_up>, > - /* uart4_txm1 */ > - <3 RK_PB2 4 &pcfg_pull_up>; > - }; > - }; > - > - uart5 { > - /omit-if-no-ref/ > - uart5m0_xfer: uart5m0-xfer { > - rockchip,pins = > - /* uart5_rxm0 */ > - <2 RK_PA1 3 &pcfg_pull_up>, > - /* uart5_txm0 */ > - <2 RK_PA2 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart5m0_ctsn: uart5m0-ctsn { > - rockchip,pins = > - /* uart5m0_ctsn */ > - <1 RK_PD7 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart5m0_rtsn: uart5m0-rtsn { > - rockchip,pins = > - /* uart5m0_rtsn */ > - <2 RK_PA0 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart5m1_xfer: uart5m1-xfer { > - rockchip,pins = > - /* uart5_rxm1 */ > - <3 RK_PC3 4 &pcfg_pull_up>, > - /* uart5_txm1 */ > - <3 RK_PC2 4 &pcfg_pull_up>; > - }; > - }; > - > - uart6 { > - /omit-if-no-ref/ > - uart6m0_xfer: uart6m0-xfer { > - rockchip,pins = > - /* uart6_rxm0 */ > - <2 RK_PA3 3 &pcfg_pull_up>, > - /* uart6_txm0 */ > - <2 RK_PA4 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart6m0_ctsn: uart6m0-ctsn { > - rockchip,pins = > - /* uart6m0_ctsn */ > - <2 RK_PC0 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart6m0_rtsn: uart6m0-rtsn { > - rockchip,pins = > - /* uart6m0_rtsn */ > - <2 RK_PB7 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart6m1_xfer: uart6m1-xfer { > - rockchip,pins = > - /* uart6_rxm1 */ > - <1 RK_PD6 3 &pcfg_pull_up>, > - /* uart6_txm1 */ > - <1 RK_PD5 3 &pcfg_pull_up>; > - }; > - }; > - > - uart7 { > - /omit-if-no-ref/ > - uart7m0_xfer: uart7m0-xfer { > - rockchip,pins = > - /* uart7_rxm0 */ > - <2 RK_PA5 3 &pcfg_pull_up>, > - /* uart7_txm0 */ > - <2 RK_PA6 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart7m0_ctsn: uart7m0-ctsn { > - rockchip,pins = > - /* uart7m0_ctsn */ > - <2 RK_PC2 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart7m0_rtsn: uart7m0-rtsn { > - rockchip,pins = > - /* uart7m0_rtsn */ > - <2 RK_PC1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart7m1_xfer: uart7m1-xfer { > - rockchip,pins = > - /* uart7_rxm1 */ > - <3 RK_PC5 4 &pcfg_pull_up>, > - /* uart7_txm1 */ > - <3 RK_PC4 4 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart7m2_xfer: uart7m2-xfer { > - rockchip,pins = > - /* uart7_rxm2 */ > - <4 RK_PA3 4 &pcfg_pull_up>, > - /* uart7_txm2 */ > - <4 RK_PA2 4 &pcfg_pull_up>; > - }; > - }; > - > - uart8 { > - /omit-if-no-ref/ > - uart8m0_xfer: uart8m0-xfer { > - rockchip,pins = > - /* uart8_rxm0 */ > - <2 RK_PC6 2 &pcfg_pull_up>, > - /* uart8_txm0 */ > - <2 RK_PC5 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart8m0_ctsn: uart8m0-ctsn { > - rockchip,pins = > - /* uart8m0_ctsn */ > - <2 RK_PB2 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart8m0_rtsn: uart8m0-rtsn { > - rockchip,pins = > - /* uart8m0_rtsn */ > - <2 RK_PB1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart8m1_xfer: uart8m1-xfer { > - rockchip,pins = > - /* uart8_rxm1 */ > - <3 RK_PA0 4 &pcfg_pull_up>, > - /* uart8_txm1 */ > - <2 RK_PD7 4 &pcfg_pull_up>; > - }; > - }; > - > - uart9 { > - /omit-if-no-ref/ > - uart9m0_xfer: uart9m0-xfer { > - rockchip,pins = > - /* uart9_rxm0 */ > - <2 RK_PA7 3 &pcfg_pull_up>, > - /* uart9_txm0 */ > - <2 RK_PB0 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart9m0_ctsn: uart9m0-ctsn { > - rockchip,pins = > - /* uart9m0_ctsn */ > - <2 RK_PC4 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart9m0_rtsn: uart9m0-rtsn { > - rockchip,pins = > - /* uart9m0_rtsn */ > - <2 RK_PC3 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart9m1_xfer: uart9m1-xfer { > - rockchip,pins = > - /* uart9_rxm1 */ > - <4 RK_PC6 4 &pcfg_pull_up>, > - /* uart9_txm1 */ > - <4 RK_PC5 4 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart9m2_xfer: uart9m2-xfer { > - rockchip,pins = > - /* uart9_rxm2 */ > - <4 RK_PA5 4 &pcfg_pull_up>, > - /* uart9_txm2 */ > - <4 RK_PA4 4 &pcfg_pull_up>; > - }; > - }; > - > - vop { > - /omit-if-no-ref/ > - vopm0_pins: vopm0-pins { > - rockchip,pins = > - /* vop_pwmm0 */ > - <0 RK_PC3 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - vopm1_pins: vopm1-pins { > - rockchip,pins = > - /* vop_pwmm1 */ > - <3 RK_PC4 2 &pcfg_pull_none>; > - }; > - }; > -}; > - > -/* > - * This part is edited handly. > - */ > -&pinctrl { > - spi0-hs { > - /omit-if-no-ref/ > - spi0m0_pins_hs: spi0m0-pins { > - rockchip,pins = > - /* spi0_clkm0 */ > - <0 RK_PB5 2 &pcfg_pull_up_drv_level_1>, > - /* spi0_misom0 */ > - <0 RK_PC5 2 &pcfg_pull_up_drv_level_1>, > - /* spi0_mosim0 */ > - <0 RK_PB6 2 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi0m0_cs0_hs: spi0m0-cs0 { > - rockchip,pins = > - /* spi0_cs0m0 */ > - <0 RK_PC6 2 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi0m0_cs1_hs: spi0m0-cs1 { > - rockchip,pins = > - /* spi0_cs1m0 */ > - <0 RK_PC4 2 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi0m1_pins_hs: spi0m1-pins { > - rockchip,pins = > - /* spi0_clkm1 */ > - <2 RK_PD3 3 &pcfg_pull_up_drv_level_1>, > - /* spi0_misom1 */ > - <2 RK_PD0 3 &pcfg_pull_up_drv_level_1>, > - /* spi0_mosim1 */ > - <2 RK_PD1 3 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi0m1_cs0_hs: spi0m1-cs0 { > - rockchip,pins = > - /* spi0_cs0m1 */ > - <2 RK_PD2 3 &pcfg_pull_up_drv_level_1>; > - }; > - }; > - > - spi1-hs { > - /omit-if-no-ref/ > - spi1m0_pins_hs: spi1m0-pins { > - rockchip,pins = > - /* spi1_clkm0 */ > - <2 RK_PB5 3 &pcfg_pull_up_drv_level_1>, > - /* spi1_misom0 */ > - <2 RK_PB6 3 &pcfg_pull_up_drv_level_1>, > - /* spi1_mosim0 */ > - <2 RK_PB7 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi1m0_cs0_hs: spi1m0-cs0 { > - rockchip,pins = > - /* spi1_cs0m0 */ > - <2 RK_PC0 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi1m0_cs1_hs: spi1m0-cs1 { > - rockchip,pins = > - /* spi1_cs1m0 */ > - <2 RK_PC6 3 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi1m1_pins_hs: spi1m1-pins { > - rockchip,pins = > - /* spi1_clkm1 */ > - <3 RK_PC3 3 &pcfg_pull_up_drv_level_1>, > - /* spi1_misom1 */ > - <3 RK_PC2 3 &pcfg_pull_up_drv_level_1>, > - /* spi1_mosim1 */ > - <3 RK_PC1 3 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi1m1_cs0_hs: spi1m1-cs0 { > - rockchip,pins = > - /* spi1_cs0m1 */ > - <3 RK_PA1 3 &pcfg_pull_up_drv_level_1>; > - }; > - }; > - > - spi2-hs { > - /omit-if-no-ref/ > - spi2m0_pins_hs: spi2m0-pins { > - rockchip,pins = > - /* spi2_clkm0 */ > - <2 RK_PC1 4 &pcfg_pull_up_drv_level_1>, > - /* spi2_misom0 */ > - <2 RK_PC2 4 &pcfg_pull_up_drv_level_1>, > - /* spi2_mosim0 */ > - <2 RK_PC3 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi2m0_cs0_hs: spi2m0-cs0 { > - rockchip,pins = > - /* spi2_cs0m0 */ > - <2 RK_PC4 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi2m0_cs1_hs: spi2m0-cs1 { > - rockchip,pins = > - /* spi2_cs1m0 */ > - <2 RK_PC5 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi2m1_pins_hs: spi2m1-pins { > - rockchip,pins = > - /* spi2_clkm1 */ > - <3 RK_PA0 3 &pcfg_pull_up_drv_level_1>, > - /* spi2_misom1 */ > - <2 RK_PD7 3 &pcfg_pull_up_drv_level_1>, > - /* spi2_mosim1 */ > - <2 RK_PD6 3 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi2m1_cs0_hs: spi2m1-cs0 { > - rockchip,pins = > - /* spi2_cs0m1 */ > - <2 RK_PD5 3 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi2m1_cs1_hs: spi2m1-cs1 { > - rockchip,pins = > - /* spi2_cs1m1 */ > - <2 RK_PD4 3 &pcfg_pull_up_drv_level_1>; > - }; > - }; > - > - spi3-hs { > - /omit-if-no-ref/ > - spi3m0_pins_hs: spi3m0-pins { > - rockchip,pins = > - /* spi3_clkm0 */ > - <4 RK_PB3 4 &pcfg_pull_up_drv_level_1>, > - /* spi3_misom0 */ > - <4 RK_PB0 4 &pcfg_pull_up_drv_level_1>, > - /* spi3_mosim0 */ > - <4 RK_PB2 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi3m0_cs0_hs: spi3m0-cs0 { > - rockchip,pins = > - /* spi3_cs0m0 */ > - <4 RK_PA6 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi3m0_cs1_hs: spi3m0-cs1 { > - rockchip,pins = > - /* spi3_cs1m0 */ > - <4 RK_PA7 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi3m1_pins_hs: spi3m1-pins { > - rockchip,pins = > - /* spi3_clkm1 */ > - <4 RK_PC2 2 &pcfg_pull_up_drv_level_1>, > - /* spi3_misom1 */ > - <4 RK_PC5 2 &pcfg_pull_up_drv_level_1>, > - /* spi3_mosim1 */ > - <4 RK_PC3 2 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi3m1_cs0_hs: spi3m1-cs0 { > - rockchip,pins = > - /* spi3_cs0m1 */ > - <4 RK_PC6 2 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi3m1_cs1_hs: spi3m1-cs1 { > - rockchip,pins = > - /* spi3_cs1m1 */ > - <4 RK_PD1 2 &pcfg_pull_up_drv_level_1>; > - }; > - }; > - > - gmac-txd-level3 { > - /omit-if-no-ref/ > - gmac0_tx_bus2_level3: gmac0-tx-bus2-level3 { > - rockchip,pins = > - /* gmac0_txd0 */ > - <2 RK_PB3 1 &pcfg_pull_none_drv_level_3>, > - /* gmac0_txd1 */ > - <2 RK_PB4 1 &pcfg_pull_none_drv_level_3>, > - /* gmac0_txen */ > - <2 RK_PB5 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac0_rgmii_bus_level3: gmac0-rgmii-bus-level3 { > - rockchip,pins = > - /* gmac0_rxd2 */ > - <2 RK_PA3 2 &pcfg_pull_none>, > - /* gmac0_rxd3 */ > - <2 RK_PA4 2 &pcfg_pull_none>, > - /* gmac0_txd2 */ > - <2 RK_PA6 2 &pcfg_pull_none_drv_level_3>, > - /* gmac0_txd3 */ > - <2 RK_PA7 2 &pcfg_pull_none_drv_level_3>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_tx_bus2_level3: gmac1m0-tx-bus2-level3 { > - rockchip,pins = > - /* gmac1_txd0m0 */ > - <3 RK_PB5 3 &pcfg_pull_none_drv_level_3>, > - /* gmac1_txd1m0 */ > - <3 RK_PB6 3 &pcfg_pull_none_drv_level_3>, > - /* gmac1_txenm0 */ > - <3 RK_PB7 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_rgmii_bus_level3: gmac1m0-rgmii-bus-level3 { > - rockchip,pins = > - /* gmac1_rxd2m0 */ > - <3 RK_PA4 3 &pcfg_pull_none>, > - /* gmac1_rxd3m0 */ > - <3 RK_PA5 3 &pcfg_pull_none>, > - /* gmac1_txd2m0 */ > - <3 RK_PA2 3 &pcfg_pull_none_drv_level_3>, > - /* gmac1_txd3m0 */ > - <3 RK_PA3 3 &pcfg_pull_none_drv_level_3>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_tx_bus2_level3: gmac1m1-tx-bus2-level3 { > - rockchip,pins = > - /* gmac1_txd0m1 */ > - <4 RK_PA4 3 &pcfg_pull_none_drv_level_3>, > - /* gmac1_txd1m1 */ > - <4 RK_PA5 3 &pcfg_pull_none_drv_level_3>, > - /* gmac1_txenm1 */ > - <4 RK_PA6 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_rgmii_bus_level3: gmac1m1-rgmii-bus-level3 { > - rockchip,pins = > - /* gmac1_rxd2m1 */ > - <4 RK_PA1 3 &pcfg_pull_none>, > - /* gmac1_rxd3m1 */ > - <4 RK_PA2 3 &pcfg_pull_none>, > - /* gmac1_txd2m1 */ > - <3 RK_PD6 3 &pcfg_pull_none_drv_level_3>, > - /* gmac1_txd3m1 */ > - <3 RK_PD7 3 &pcfg_pull_none_drv_level_3>; > - }; > - }; > - > - gmac-txc-level2 { > - /omit-if-no-ref/ > - gmac0_rgmii_clk_level2: gmac0-rgmii-clk-level2 { > - rockchip,pins = > - /* gmac0_rxclk */ > - <2 RK_PA5 2 &pcfg_pull_none>, > - /* gmac0_txclk */ > - <2 RK_PB0 2 &pcfg_pull_none_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_rgmii_clk_level2: gmac1m0-rgmii-clk-level2 { > - rockchip,pins = > - /* gmac1_rxclkm0 */ > - <3 RK_PA7 3 &pcfg_pull_none>, > - /* gmac1_txclkm0 */ > - <3 RK_PA6 3 &pcfg_pull_none_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_rgmii_clk_level2: gmac1m1-rgmii-clk-level2 { > - rockchip,pins = > - /* gmac1_rxclkm1 */ > - <4 RK_PA3 3 &pcfg_pull_none>, > - /* gmac1_txclkm1 */ > - <4 RK_PA0 3 &pcfg_pull_none_drv_level_2>; > - }; > - }; > - > - tsadc { > - /omit-if-no-ref/ > - tsadc_pin: tsadc-pin { > - rockchip,pins = > - /* tsadc_pin */ > - <0 RK_PA1 0 &pcfg_pull_none>; > - }; > - }; > - > - lcdc { > - /omit-if-no-ref/ > - lcdc_clock: lcdc-clock { > - rockchip,pins = > - /* lcdc_clk */ > - <3 RK_PA0 1 &pcfg_pull_none>, > - /* lcdc_den */ > - <3 RK_PC3 1 &pcfg_pull_none>, > - /* lcdc_hsync */ > - <3 RK_PC1 1 &pcfg_pull_none>, > - /* lcdc_vsync */ > - <3 RK_PC2 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - lcdc_data16: lcdc-data16 { > - rockchip,pins = > - /* lcdc_d3 */ > - <2 RK_PD3 1 &pcfg_pull_none>, > - /* lcdc_d4 */ > - <2 RK_PD4 1 &pcfg_pull_none>, > - /* lcdc_d5 */ > - <2 RK_PD5 1 &pcfg_pull_none>, > - /* lcdc_d6 */ > - <2 RK_PD6 1 &pcfg_pull_none>, > - /* lcdc_d7 */ > - <2 RK_PD7 1 &pcfg_pull_none>, > - /* lcdc_d10 */ > - <3 RK_PA3 1 &pcfg_pull_none>, > - /* lcdc_d11 */ > - <3 RK_PA4 1 &pcfg_pull_none>, > - /* lcdc_d12 */ > - <3 RK_PA5 1 &pcfg_pull_none>, > - /* lcdc_d13 */ > - <3 RK_PA6 1 &pcfg_pull_none>, > - /* lcdc_d14 */ > - <3 RK_PA7 1 &pcfg_pull_none>, > - /* lcdc_d15 */ > - <3 RK_PB0 1 &pcfg_pull_none>, > - /* lcdc_d19 */ > - <3 RK_PB4 1 &pcfg_pull_none>, > - /* lcdc_d20 */ > - <3 RK_PB5 1 &pcfg_pull_none>, > - /* lcdc_d21 */ > - <3 RK_PB6 1 &pcfg_pull_none>, > - /* lcdc_d22 */ > - <3 RK_PB7 1 &pcfg_pull_none>, > - /* lcdc_d23 */ > - <3 RK_PC0 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - lcdc_data18: lcdc-data18 { > - rockchip,pins = > - /* lcdc_d2 */ > - <2 RK_PD2 1 &pcfg_pull_none>, > - /* lcdc_d3 */ > - <2 RK_PD3 1 &pcfg_pull_none>, > - /* lcdc_d4 */ > - <2 RK_PD4 1 &pcfg_pull_none>, > - /* lcdc_d5 */ > - <2 RK_PD5 1 &pcfg_pull_none>, > - /* lcdc_d6 */ > - <2 RK_PD6 1 &pcfg_pull_none>, > - /* lcdc_d7 */ > - <2 RK_PD7 1 &pcfg_pull_none>, > - /* lcdc_d10 */ > - <3 RK_PA3 1 &pcfg_pull_none>, > - /* lcdc_d11 */ > - <3 RK_PA4 1 &pcfg_pull_none>, > - /* lcdc_d12 */ > - <3 RK_PA5 1 &pcfg_pull_none>, > - /* lcdc_d13 */ > - <3 RK_PA6 1 &pcfg_pull_none>, > - /* lcdc_d14 */ > - <3 RK_PA7 1 &pcfg_pull_none>, > - /* lcdc_d15 */ > - <3 RK_PB0 1 &pcfg_pull_none>, > - /* lcdc_d18 */ > - <3 RK_PB3 1 &pcfg_pull_none>, > - /* lcdc_d19 */ > - <3 RK_PB4 1 &pcfg_pull_none>, > - /* lcdc_d20 */ > - <3 RK_PB5 1 &pcfg_pull_none>, > - /* lcdc_d21 */ > - <3 RK_PB6 1 &pcfg_pull_none>, > - /* lcdc_d22 */ > - <3 RK_PB7 1 &pcfg_pull_none>, > - /* lcdc_d23 */ > - <3 RK_PC0 1 &pcfg_pull_none>; > - }; > - }; > - > -}; > diff --git a/arch/arm/dts/rk3568-radxa-cm3i.dtsi b/arch/arm/dts/rk3568-radxa-cm3i.dtsi > deleted file mode 100644 > index 45b03dcbbad4..000000000000 > --- a/arch/arm/dts/rk3568-radxa-cm3i.dtsi > +++ /dev/null > @@ -1,412 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include "rk3568.dtsi" > - > -/ { > - compatible = "radxa,cm3i", "rockchip,rk3568"; > - > - aliases { > - mmc0 = &sdhci; > - }; > - > - chosen { > - stdout-path = "serial2:115200n8"; > - }; > - > - gpio-leds { > - compatible = "gpio-leds"; > - > - led_user: led-0 { > - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - function = LED_FUNCTION_HEARTBEAT; > - color = <LED_COLOR_ID_GREEN>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&led_user_en>; > - }; > - }; > - > - pcie30_avdd0v9: pcie30-avdd0v9-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - pcie30_avdd1v8: pcie30-avdd1v8-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v_input>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v_input>; > - }; > - > - /* labeled +5v_input in schematic */ > - vcc5v_input: vcc5v-input-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v_input"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > -}; > - > -&combphy0 { > - status = "okay"; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&combphy2 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&display_subsystem { > - status = "disabled"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc5v_input>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>; > - rockchip,system-power-controller; > - wakeup-source; > - > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > -}; > - > -&pinctrl { > - leds { > - led_user_en: led_user_en { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int: pmic_int { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - extcon = <&usb2phy0>; > -}; > diff --git a/arch/arm/dts/rk3568-radxa-e25.dts b/arch/arm/dts/rk3568-radxa-e25.dts > deleted file mode 100644 > index 72ad74c38a2b..000000000000 > --- a/arch/arm/dts/rk3568-radxa-e25.dts > +++ /dev/null > @@ -1,236 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > -#include "rk3568-radxa-cm3i.dtsi" > - > -/ { > - model = "Radxa E25 Carrier Board"; > - compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568"; > - > - aliases { > - mmc1 = &sdmmc0; > - }; > - > - pwm-leds { > - compatible = "pwm-leds-multicolor"; > - > - multi-led { > - color = <LED_COLOR_ID_RGB>; > - max-brightness = <255>; > - > - led-red { > - color = <LED_COLOR_ID_RED>; > - pwms = <&pwm1 0 1000000 0>; > - }; > - > - led-green { > - color = <LED_COLOR_ID_GREEN>; > - pwms = <&pwm2 0 1000000 0>; > - }; > - > - led-blue { > - color = <LED_COLOR_ID_BLUE>; > - pwms = <&pwm12 0 1000000 0>; > - }; > - }; > - }; > - > - vbus_typec: vbus-typec-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vbus_typec_en>; > - regulator-name = "vbus_typec"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - /* actually fed by vcc5v0_sys, dependent > - * on pi6c clock generator > - */ > - vcc3v3_minipcie: vcc3v3-minipcie-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&minipcie_enable_h>; > - regulator-name = "vcc3v3_minipcie"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_pi6c_05>; > - }; > - > - vcc3v3_ngff: vcc3v3-ngff-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&ngffpcie_enable_h>; > - regulator-name = "vcc3v3_ngff"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie30x1_enable_h>; > - regulator-name = "vcc3v3_pcie30x1"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_enable_h>; > - regulator-name = "vcc3v3_pcie"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > -}; > - > -&combphy1 { > - phy-supply = <&vcc3v3_pcie30x1>; > -}; > - > -&pcie2x1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie20_reset_h>; > - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pi6c_05>; > - status = "okay"; > -}; > - > -&pcie30phy { > - data-lanes = <1 2>; > - status = "okay"; > -}; > - > -&pcie3x1 { > - num-lanes = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie30x1m0_pins>; > - reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_minipcie>; > - status = "okay"; > -}; > - > -&pcie3x2 { > - num-lanes = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie30x2_reset_h>; > - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pi6c_05>; > - status = "okay"; > -}; > - > -&pinctrl { > - pcie { > - pcie20_reset_h: pcie20-reset-h { > - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie30x1_enable_h: pcie30x1-enable-h { > - rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie30x2_reset_h: pcie30x2-reset-h { > - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie_enable_h: pcie-enable-h { > - rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb { > - minipcie_enable_h: minipcie-enable-h { > - rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - ngffpcie_enable_h: ngffpcie-enable-h { > - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vbus_typec_en: vbus_typec_en { > - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pwm1 { > - status = "okay"; > -}; > - > -&pwm2 { > - status = "okay"; > -}; > - > -&pwm12 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pwm12m1_pins>; > - status = "okay"; > -}; > - > -&sata1 { > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - /* Also used in pcie30x1_clkreqnm0 */ > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vbus_typec>; > - status = "okay"; > -}; > - > -&usb2phy1_host { > - phy-supply = <&vcc3v3_minipcie>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc3v3_ngff>; > - status = "okay"; > -}; > diff --git a/arch/arm/dts/rk3568-rock-3a.dts b/arch/arm/dts/rk3568-rock-3a.dts > deleted file mode 100644 > index a5e974ea659e..000000000000 > --- a/arch/arm/dts/rk3568-rock-3a.dts > +++ /dev/null > @@ -1,859 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3568.dtsi" > - > -/ { > - model = "Radxa ROCK3 Model A"; > - compatible = "radxa,rock3a", "rockchip,rk3568"; > - > - aliases { > - ethernet0 = &gmac1; > - mmc0 = &sdhci; > - mmc1 = &sdmmc0; > - mmc2 = &sdmmc2; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - gmac1_clkin: external-gmac1-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "gmac1_clkin"; > - #clock-cells = <0>; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led_user: led-0 { > - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > - function = LED_FUNCTION_HEARTBEAT; > - color = <LED_COLOR_ID_BLUE>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&led_user_en>; > - }; > - }; > - > - rk809-sound { > - compatible = "simple-audio-card"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,name = "Analog RK809"; > - simple-audio-card,mclk-fs = <256>; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s1_8ch>; > - }; > - > - simple-audio-card,codec { > - sound-dai = <&rk809>; > - }; > - }; > - > - sdio_pwrseq: sdio-pwrseq { > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk809 1>; > - clock-names = "ext_clock"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_enable>; > - post-power-on-delay-ms = <100>; > - power-off-delay-us = <5000000>; > - reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; > - }; > - > - vcc12v_dcin: vcc12v-dcin-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc12v_dcin"; > - regulator-always-on; > - regulator-boot-on; > - }; > - > - pcie30_avdd0v9: pcie30-avdd0v9-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - pcie30_avdd1v8: pcie30-avdd1v8-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - /* pi6c pcie clock generator */ > - vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_pi6c_03"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc3v3_pcie: vcc3v3-pcie-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_enable_h>; > - regulator-name = "vcc3v3_pcie"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc5v0_usb: vcc5v0-usb-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc5v0_usb_host: vcc5v0-usb-host-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_host_en>; > - regulator-name = "vcc5v0_usb_host"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb_hub: vcc5v0-usb-hub-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_hub_en>; > - regulator-name = "vcc5v0_usb_hub"; > - regulator-always-on; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en>; > - regulator-name = "vcc5v0_usb_otg"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc_cam: vcc-cam-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc_cam_en>; > - regulator-name = "vcc_cam"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_mipi: vcc-mipi-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc_mipi_en>; > - regulator-name = "vcc_mipi"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > -}; > - > -&combphy0 { > - status = "okay"; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&combphy2 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; > - clock_in_out = "input"; > - phy-handle = <&rgmii_phy1>; > - phy-mode = "rgmii-id"; > - phy-supply = <&vcc_3v3>; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m1_miim > - &gmac1m1_tx_bus2 > - &gmac1m1_rx_bus2 > - &gmac1m1_rgmii_clk > - &gmac1m1_clkinout > - &gmac1m1_rgmii_bus>; > - status = "okay"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - pinctrl-names = "default"; > - pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm1_cec>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - #clock-cells = <1>; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; > - rockchip,system-power-controller; > - #sound-dai-cells = <0>; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - > - codec { > - mic-in-differential; > - }; > - }; > -}; > - > -&i2c3 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c3m1_xfer>; > - status = "disabled"; > -}; > - > -&i2c4 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c4m1_xfer>; > - status = "disabled"; > -}; > - > -&i2c5 { > - status = "okay"; > - > - hym8563: rtc@51 { > - compatible = "haoyu,hym8563"; > - reg = <0x51>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <0>; > - clock-output-names = "rtcic_32kout"; > - pinctrl-names = "default"; > - pinctrl-0 = <&hym8563_int>; > - wakeup-source; > - }; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&i2s1_8ch { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&i2s2_2ch { > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - pinctrl-names = "default"; > - pinctrl-0 = <ð_phy_rst>; > - reset-assert-us = <20000>; > - reset-deassert-us = <100000>; > - reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; > - }; > -}; > - > -&pcie2x1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_reset_h>; > - reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pcie30phy { > - phy-supply = <&vcc3v3_pi6c_03>; > - status = "okay"; > -}; > - > -&pcie3x2 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie30x2m1_pins>; > - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pinctrl { > - cam { > - vcc_cam_en: vcc_cam_en { > - rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - display { > - vcc_mipi_en: vcc_mipi_en { > - rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - ethernet { > - eth_phy_rst: eth_phy_rst { > - rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - hym8563 { > - hym8563_int: hym8563-int { > - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - leds { > - led_user_en: led_user_en { > - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie_enable_h: pcie-enable-h { > - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie_reset_h: pcie-reset-h { > - rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int: pmic_int { > - rockchip,pins = > - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - usb { > - vcc5v0_usb_host_en: vcc5v0_usb_host_en { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - vcc5v0_usb_hub_en: vcc5v0_usb_hub_en { > - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - bt { > - bt_enable: bt-enable { > - rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - bt_host_wake: bt-host-wake { > - rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - > - bt_wake: bt-wake { > - rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - sdio-pwrseq { > - wifi_enable: wifi-enable { > - rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr50; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&sdmmc2 { > - bus-width = <4>; > - disable-wp; > - cap-sd-highspeed; > - cap-sdio-irq; > - keep-power-in-suspend; > - mmc-pwrseq = <&sdio_pwrseq>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; > - sd-uhs-sdr12; > - sd-uhs-sdr25; > - sd-uhs-sdr50; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sys>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; > - uart-has-rtscts; > - status = "okay"; > - > - bluetooth { > - compatible = "brcm,bcm43438-bt"; > - clocks = <&rk809 1>; > - clock-names = "lpo"; > - device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; > - host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; > - shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>; > - vbat-supply = <&vcc3v3_sys>; > - vddio-supply = <&vcc_1v8>; > - /* vddio comes from regulator on module, use IO bank voltage instead */ > - }; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - extcon = <&usb2phy0>; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3568.dtsi b/arch/arm/dts/rk3568.dtsi > deleted file mode 100644 > index f1be76a54ceb..000000000000 > --- a/arch/arm/dts/rk3568.dtsi > +++ /dev/null > @@ -1,267 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. > - */ > - > -#include "rk356x.dtsi" > - > -/ { > - compatible = "rockchip,rk3568"; > - > - sata0: sata@fc000000 { > - compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; > - reg = <0 0xfc000000 0 0x1000>; > - clocks = <&cru ACLK_SATA0>, <&cru CLK_SATA0_PMALIVE>, > - <&cru CLK_SATA0_RXOOB>; > - clock-names = "sata", "pmalive", "rxoob"; > - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; > - phys = <&combphy0 PHY_TYPE_SATA>; > - phy-names = "sata-phy"; > - ports-implemented = <0x1>; > - power-domains = <&power RK3568_PD_PIPE>; > - status = "disabled"; > - }; > - > - pipe_phy_grf0: syscon@fdc70000 { > - compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; > - reg = <0x0 0xfdc70000 0x0 0x1000>; > - }; > - > - qos_pcie3x1: qos@fe190080 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190080 0x0 0x20>; > - }; > - > - qos_pcie3x2: qos@fe190100 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190100 0x0 0x20>; > - }; > - > - qos_sata0: qos@fe190200 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190200 0x0 0x20>; > - }; > - > - pcie30_phy_grf: syscon@fdcb8000 { > - compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon"; > - reg = <0x0 0xfdcb8000 0x0 0x10000>; > - }; > - > - pcie30phy: phy@fe8c0000 { > - compatible = "rockchip,rk3568-pcie3-phy"; > - reg = <0x0 0xfe8c0000 0x0 0x20000>; > - #phy-cells = <0>; > - clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>, > - <&cru PCLK_PCIE30PHY>; > - clock-names = "refclk_m", "refclk_n", "pclk"; > - resets = <&cru SRST_PCIE30PHY>; > - reset-names = "phy"; > - rockchip,phy-grf = <&pcie30_phy_grf>; > - status = "disabled"; > - }; > - > - pcie3x1: pcie@fe270000 { > - compatible = "rockchip,rk3568-pcie"; > - #address-cells = <3>; > - #size-cells = <2>; > - bus-range = <0x0 0xf>; > - clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>, > - <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>, > - <&cru CLK_PCIE30X1_AUX_NDFT>; > - clock-names = "aclk_mst", "aclk_slv", > - "aclk_dbi", "pclk", "aux"; > - device_type = "pci"; > - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; > - #interrupt-cells = <1>; > - interrupt-map-mask = <0 0 0 7>; > - interrupt-map = <0 0 0 1 &pcie3x1_intc 0>, > - <0 0 0 2 &pcie3x1_intc 1>, > - <0 0 0 3 &pcie3x1_intc 2>, > - <0 0 0 4 &pcie3x1_intc 3>; > - linux,pci-domain = <1>; > - num-ib-windows = <6>; > - num-ob-windows = <2>; > - max-link-speed = <3>; > - msi-map = <0x0 &gic 0x1000 0x1000>; > - num-lanes = <1>; > - phys = <&pcie30phy>; > - phy-names = "pcie-phy"; > - power-domains = <&power RK3568_PD_PIPE>; > - reg = <0x3 0xc0400000 0x0 0x00400000>, > - <0x0 0xfe270000 0x0 0x00010000>, > - <0x0 0xf2000000 0x0 0x00100000>; > - ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>, > - <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>, > - <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>; > - reg-names = "dbi", "apb", "config"; > - resets = <&cru SRST_PCIE30X1_POWERUP>; > - reset-names = "pipe"; > - /* bifurcation; lane1 when using 1+1 */ > - status = "disabled"; > - > - pcie3x1_intc: legacy-interrupt-controller { > - interrupt-controller; > - #address-cells = <0>; > - #interrupt-cells = <1>; > - interrupt-parent = <&gic>; > - interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; > - }; > - }; > - > - pcie3x2: pcie@fe280000 { > - compatible = "rockchip,rk3568-pcie"; > - #address-cells = <3>; > - #size-cells = <2>; > - bus-range = <0x0 0xf>; > - clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>, > - <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>, > - <&cru CLK_PCIE30X2_AUX_NDFT>; > - clock-names = "aclk_mst", "aclk_slv", > - "aclk_dbi", "pclk", "aux"; > - device_type = "pci"; > - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; > - #interrupt-cells = <1>; > - interrupt-map-mask = <0 0 0 7>; > - interrupt-map = <0 0 0 1 &pcie3x2_intc 0>, > - <0 0 0 2 &pcie3x2_intc 1>, > - <0 0 0 3 &pcie3x2_intc 2>, > - <0 0 0 4 &pcie3x2_intc 3>; > - linux,pci-domain = <2>; > - num-ib-windows = <6>; > - num-ob-windows = <2>; > - max-link-speed = <3>; > - msi-map = <0x0 &gic 0x2000 0x1000>; > - num-lanes = <2>; > - phys = <&pcie30phy>; > - phy-names = "pcie-phy"; > - power-domains = <&power RK3568_PD_PIPE>; > - reg = <0x3 0xc0800000 0x0 0x00400000>, > - <0x0 0xfe280000 0x0 0x00010000>, > - <0x0 0xf0000000 0x0 0x00100000>; > - ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>, > - <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>, > - <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>; > - reg-names = "dbi", "apb", "config"; > - resets = <&cru SRST_PCIE30X2_POWERUP>; > - reset-names = "pipe"; > - /* bifurcation; lane0 when using 1+1 */ > - status = "disabled"; > - > - pcie3x2_intc: legacy-interrupt-controller { > - interrupt-controller; > - #address-cells = <0>; > - #interrupt-cells = <1>; > - interrupt-parent = <&gic>; > - interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; > - }; > - }; > - > - gmac0: ethernet@fe2a0000 { > - compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; > - reg = <0x0 0xfe2a0000 0x0 0x10000>; > - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "macirq", "eth_wake_irq"; > - clocks = <&cru SCLK_GMAC0>, <&cru SCLK_GMAC0_RX_TX>, > - <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_MAC0_REFOUT>, > - <&cru ACLK_GMAC0>, <&cru PCLK_GMAC0>, > - <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>; > - clock-names = "stmmaceth", "mac_clk_rx", > - "mac_clk_tx", "clk_mac_refout", > - "aclk_mac", "pclk_mac", > - "clk_mac_speed", "ptp_ref"; > - resets = <&cru SRST_A_GMAC0>; > - reset-names = "stmmaceth"; > - rockchip,grf = <&grf>; > - snps,axi-config = <&gmac0_stmmac_axi_setup>; > - snps,mixed-burst; > - snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; > - snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; > - snps,tso; > - status = "disabled"; > - > - mdio0: mdio { > - compatible = "snps,dwmac-mdio"; > - #address-cells = <0x1>; > - #size-cells = <0x0>; > - }; > - > - gmac0_stmmac_axi_setup: stmmac-axi-config { > - snps,blen = <0 0 0 0 16 8 4>; > - snps,rd_osr_lmt = <8>; > - snps,wr_osr_lmt = <4>; > - }; > - > - gmac0_mtl_rx_setup: rx-queues-config { > - snps,rx-queues-to-use = <1>; > - queue0 {}; > - }; > - > - gmac0_mtl_tx_setup: tx-queues-config { > - snps,tx-queues-to-use = <1>; > - queue0 {}; > - }; > - }; > - > - combphy0: phy@fe820000 { > - compatible = "rockchip,rk3568-naneng-combphy"; > - reg = <0x0 0xfe820000 0x0 0x100>; > - clocks = <&pmucru CLK_PCIEPHY0_REF>, > - <&cru PCLK_PIPEPHY0>, > - <&cru PCLK_PIPE>; > - clock-names = "ref", "apb", "pipe"; > - assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>; > - assigned-clock-rates = <100000000>; > - resets = <&cru SRST_PIPEPHY0>; > - rockchip,pipe-grf = <&pipegrf>; > - rockchip,pipe-phy-grf = <&pipe_phy_grf0>; > - #phy-cells = <1>; > - status = "disabled"; > - }; > -}; > - > -&cpu0_opp_table { > - opp-1992000000 { > - opp-hz = /bits/ 64 <1992000000>; > - opp-microvolt = <1150000 1150000 1150000>; > - }; > -}; > - > -&pipegrf { > - compatible = "rockchip,rk3568-pipe-grf", "syscon"; > -}; > - > -&power { > - power-domain@RK3568_PD_PIPE { > - reg = <RK3568_PD_PIPE>; > - clocks = <&cru PCLK_PIPE>; > - pm_qos = <&qos_pcie2x1>, > - <&qos_pcie3x1>, > - <&qos_pcie3x2>, > - <&qos_sata0>, > - <&qos_sata1>, > - <&qos_sata2>, > - <&qos_usb3_0>, > - <&qos_usb3_1>; > - #power-domain-cells = <0>; > - }; > -}; > - > -&usb_host0_xhci { > - phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>; > - phy-names = "usb2-phy", "usb3-phy"; > -}; > - > -&vop { > - compatible = "rockchip,rk3568-vop"; > -}; > diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi > deleted file mode 100644 > index c19c0f1b3778..000000000000 > --- a/arch/arm/dts/rk356x.dtsi > +++ /dev/null > @@ -1,1886 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. > - */ > - > -#include <dt-bindings/clock/rk3568-cru.h> > -#include <dt-bindings/interrupt-controller/arm-gic.h> > -#include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/phy/phy.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/power/rk3568-power.h> > -#include <dt-bindings/soc/rockchip,boot-mode.h> > -#include <dt-bindings/thermal/thermal.h> > - > -/ { > - interrupt-parent = <&gic>; > - #address-cells = <2>; > - #size-cells = <2>; > - > - aliases { > - gpio0 = &gpio0; > - gpio1 = &gpio1; > - gpio2 = &gpio2; > - gpio3 = &gpio3; > - gpio4 = &gpio4; > - i2c0 = &i2c0; > - i2c1 = &i2c1; > - i2c2 = &i2c2; > - i2c3 = &i2c3; > - i2c4 = &i2c4; > - i2c5 = &i2c5; > - serial0 = &uart0; > - serial1 = &uart1; > - serial2 = &uart2; > - serial3 = &uart3; > - serial4 = &uart4; > - serial5 = &uart5; > - serial6 = &uart6; > - serial7 = &uart7; > - serial8 = &uart8; > - serial9 = &uart9; > - spi0 = &spi0; > - spi1 = &spi1; > - spi2 = &spi2; > - spi3 = &spi3; > - }; > - > - cpus { > - #address-cells = <2>; > - #size-cells = <0>; > - > - cpu0: cpu@0 { > - device_type = "cpu"; > - compatible = "arm,cortex-a55"; > - reg = <0x0 0x0>; > - clocks = <&scmi_clk 0>; > - #cooling-cells = <2>; > - enable-method = "psci"; > - operating-points-v2 = <&cpu0_opp_table>; > - }; > - > - cpu1: cpu@100 { > - device_type = "cpu"; > - compatible = "arm,cortex-a55"; > - reg = <0x0 0x100>; > - #cooling-cells = <2>; > - enable-method = "psci"; > - operating-points-v2 = <&cpu0_opp_table>; > - }; > - > - cpu2: cpu@200 { > - device_type = "cpu"; > - compatible = "arm,cortex-a55"; > - reg = <0x0 0x200>; > - #cooling-cells = <2>; > - enable-method = "psci"; > - operating-points-v2 = <&cpu0_opp_table>; > - }; > - > - cpu3: cpu@300 { > - device_type = "cpu"; > - compatible = "arm,cortex-a55"; > - reg = <0x0 0x300>; > - #cooling-cells = <2>; > - enable-method = "psci"; > - operating-points-v2 = <&cpu0_opp_table>; > - }; > - }; > - > - cpu0_opp_table: opp-table-0 { > - compatible = "operating-points-v2"; > - opp-shared; > - > - opp-408000000 { > - opp-hz = /bits/ 64 <408000000>; > - opp-microvolt = <900000 900000 1150000>; > - clock-latency-ns = <40000>; > - }; > - > - opp-600000000 { > - opp-hz = /bits/ 64 <600000000>; > - opp-microvolt = <900000 900000 1150000>; > - }; > - > - opp-816000000 { > - opp-hz = /bits/ 64 <816000000>; > - opp-microvolt = <900000 900000 1150000>; > - opp-suspend; > - }; > - > - opp-1104000000 { > - opp-hz = /bits/ 64 <1104000000>; > - opp-microvolt = <900000 900000 1150000>; > - }; > - > - opp-1416000000 { > - opp-hz = /bits/ 64 <1416000000>; > - opp-microvolt = <900000 900000 1150000>; > - }; > - > - opp-1608000000 { > - opp-hz = /bits/ 64 <1608000000>; > - opp-microvolt = <975000 975000 1150000>; > - }; > - > - opp-1800000000 { > - opp-hz = /bits/ 64 <1800000000>; > - opp-microvolt = <1050000 1050000 1150000>; > - }; > - }; > - > - display_subsystem: display-subsystem { > - compatible = "rockchip,display-subsystem"; > - ports = <&vop_out>; > - }; > - > - firmware { > - scmi: scmi { > - compatible = "arm,scmi-smc"; > - arm,smc-id = <0x82000010>; > - shmem = <&scmi_shmem>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - scmi_clk: protocol@14 { > - reg = <0x14>; > - #clock-cells = <1>; > - }; > - }; > - }; > - > - gpu_opp_table: opp-table-1 { > - compatible = "operating-points-v2"; > - > - opp-200000000 { > - opp-hz = /bits/ 64 <200000000>; > - opp-microvolt = <825000>; > - }; > - > - opp-300000000 { > - opp-hz = /bits/ 64 <300000000>; > - opp-microvolt = <825000>; > - }; > - > - opp-400000000 { > - opp-hz = /bits/ 64 <400000000>; > - opp-microvolt = <825000>; > - }; > - > - opp-600000000 { > - opp-hz = /bits/ 64 <600000000>; > - opp-microvolt = <825000>; > - }; > - > - opp-700000000 { > - opp-hz = /bits/ 64 <700000000>; > - opp-microvolt = <900000>; > - }; > - > - opp-800000000 { > - opp-hz = /bits/ 64 <800000000>; > - opp-microvolt = <1000000>; > - }; > - }; > - > - hdmi_sound: hdmi-sound { > - compatible = "simple-audio-card"; > - simple-audio-card,name = "HDMI"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,mclk-fs = <256>; > - status = "disabled"; > - > - simple-audio-card,codec { > - sound-dai = <&hdmi>; > - }; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s0_8ch>; > - }; > - }; > - > - pmu { > - compatible = "arm,cortex-a55-pmu"; > - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; > - }; > - > - psci { > - compatible = "arm,psci-1.0"; > - method = "smc"; > - }; > - > - timer { > - compatible = "arm,armv8-timer"; > - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; > - arm,no-tick-in-suspend; > - }; > - > - xin24m: xin24m { > - compatible = "fixed-clock"; > - clock-frequency = <24000000>; > - clock-output-names = "xin24m"; > - #clock-cells = <0>; > - }; > - > - xin32k: xin32k { > - compatible = "fixed-clock"; > - clock-frequency = <32768>; > - clock-output-names = "xin32k"; > - pinctrl-0 = <&clk32k_out0>; > - pinctrl-names = "default"; > - #clock-cells = <0>; > - }; > - > - sram@10f000 { > - compatible = "mmio-sram"; > - reg = <0x0 0x0010f000 0x0 0x100>; > - #address-cells = <1>; > - #size-cells = <1>; > - ranges = <0 0x0 0x0010f000 0x100>; > - > - scmi_shmem: sram@0 { > - compatible = "arm,scmi-shmem"; > - reg = <0x0 0x100>; > - }; > - }; > - > - sata1: sata@fc400000 { > - compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; > - reg = <0 0xfc400000 0 0x1000>; > - clocks = <&cru ACLK_SATA1>, <&cru CLK_SATA1_PMALIVE>, > - <&cru CLK_SATA1_RXOOB>; > - clock-names = "sata", "pmalive", "rxoob"; > - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; > - phys = <&combphy1 PHY_TYPE_SATA>; > - phy-names = "sata-phy"; > - ports-implemented = <0x1>; > - power-domains = <&power RK3568_PD_PIPE>; > - status = "disabled"; > - }; > - > - sata2: sata@fc800000 { > - compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; > - reg = <0 0xfc800000 0 0x1000>; > - clocks = <&cru ACLK_SATA2>, <&cru CLK_SATA2_PMALIVE>, > - <&cru CLK_SATA2_RXOOB>; > - clock-names = "sata", "pmalive", "rxoob"; > - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; > - phys = <&combphy2 PHY_TYPE_SATA>; > - phy-names = "sata-phy"; > - ports-implemented = <0x1>; > - power-domains = <&power RK3568_PD_PIPE>; > - status = "disabled"; > - }; > - > - usb_host0_xhci: usb@fcc00000 { > - compatible = "rockchip,rk3568-dwc3", "snps,dwc3"; > - reg = <0x0 0xfcc00000 0x0 0x400000>; > - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>, > - <&cru ACLK_USB3OTG0>; > - clock-names = "ref_clk", "suspend_clk", > - "bus_clk"; > - dr_mode = "otg"; > - phy_type = "utmi_wide"; > - power-domains = <&power RK3568_PD_PIPE>; > - resets = <&cru SRST_USB3OTG0>; > - snps,dis_u2_susphy_quirk; > - status = "disabled"; > - }; > - > - usb_host1_xhci: usb@fd000000 { > - compatible = "rockchip,rk3568-dwc3", "snps,dwc3"; > - reg = <0x0 0xfd000000 0x0 0x400000>; > - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>, > - <&cru ACLK_USB3OTG1>; > - clock-names = "ref_clk", "suspend_clk", > - "bus_clk"; > - dr_mode = "host"; > - phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>; > - phy-names = "usb2-phy", "usb3-phy"; > - phy_type = "utmi_wide"; > - power-domains = <&power RK3568_PD_PIPE>; > - resets = <&cru SRST_USB3OTG1>; > - snps,dis_u2_susphy_quirk; > - status = "disabled"; > - }; > - > - gic: interrupt-controller@fd400000 { > - compatible = "arm,gic-v3"; > - reg = <0x0 0xfd400000 0 0x10000>, /* GICD */ > - <0x0 0xfd460000 0 0x80000>; /* GICR */ > - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-controller; > - #interrupt-cells = <3>; > - mbi-alias = <0x0 0xfd410000>; > - mbi-ranges = <296 24>; > - msi-controller; > - }; > - > - usb_host0_ehci: usb@fd800000 { > - compatible = "generic-ehci"; > - reg = <0x0 0xfd800000 0x0 0x40000>; > - interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>, > - <&cru PCLK_USB>; > - phys = <&usb2phy1_otg>; > - phy-names = "usb"; > - status = "disabled"; > - }; > - > - usb_host0_ohci: usb@fd840000 { > - compatible = "generic-ohci"; > - reg = <0x0 0xfd840000 0x0 0x40000>; > - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>, > - <&cru PCLK_USB>; > - phys = <&usb2phy1_otg>; > - phy-names = "usb"; > - status = "disabled"; > - }; > - > - usb_host1_ehci: usb@fd880000 { > - compatible = "generic-ehci"; > - reg = <0x0 0xfd880000 0x0 0x40000>; > - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>, > - <&cru PCLK_USB>; > - phys = <&usb2phy1_host>; > - phy-names = "usb"; > - status = "disabled"; > - }; > - > - usb_host1_ohci: usb@fd8c0000 { > - compatible = "generic-ohci"; > - reg = <0x0 0xfd8c0000 0x0 0x40000>; > - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>, > - <&cru PCLK_USB>; > - phys = <&usb2phy1_host>; > - phy-names = "usb"; > - status = "disabled"; > - }; > - > - pmugrf: syscon@fdc20000 { > - compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd"; > - reg = <0x0 0xfdc20000 0x0 0x10000>; > - > - pmu_io_domains: io-domains { > - compatible = "rockchip,rk3568-pmu-io-voltage-domain"; > - status = "disabled"; > - }; > - }; > - > - pipegrf: syscon@fdc50000 { > - reg = <0x0 0xfdc50000 0x0 0x1000>; > - }; > - > - grf: syscon@fdc60000 { > - compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd"; > - reg = <0x0 0xfdc60000 0x0 0x10000>; > - }; > - > - pipe_phy_grf1: syscon@fdc80000 { > - compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; > - reg = <0x0 0xfdc80000 0x0 0x1000>; > - }; > - > - pipe_phy_grf2: syscon@fdc90000 { > - compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; > - reg = <0x0 0xfdc90000 0x0 0x1000>; > - }; > - > - usb2phy0_grf: syscon@fdca0000 { > - compatible = "rockchip,rk3568-usb2phy-grf", "syscon"; > - reg = <0x0 0xfdca0000 0x0 0x8000>; > - }; > - > - usb2phy1_grf: syscon@fdca8000 { > - compatible = "rockchip,rk3568-usb2phy-grf", "syscon"; > - reg = <0x0 0xfdca8000 0x0 0x8000>; > - }; > - > - pmucru: clock-controller@fdd00000 { > - compatible = "rockchip,rk3568-pmucru"; > - reg = <0x0 0xfdd00000 0x0 0x1000>; > - #clock-cells = <1>; > - #reset-cells = <1>; > - }; > - > - cru: clock-controller@fdd20000 { > - compatible = "rockchip,rk3568-cru"; > - reg = <0x0 0xfdd20000 0x0 0x1000>; > - clocks = <&xin24m>; > - clock-names = "xin24m"; > - #clock-cells = <1>; > - #reset-cells = <1>; > - assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, <&pmucru PLL_PPLL>; > - assigned-clock-rates = <32768>, <1200000000>, <200000000>; > - assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>; > - rockchip,grf = <&grf>; > - }; > - > - i2c0: i2c@fdd40000 { > - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; > - reg = <0x0 0xfdd40000 0x0 0x1000>; > - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>; > - clock-names = "i2c", "pclk"; > - pinctrl-0 = <&i2c0_xfer>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - uart0: serial@fdd50000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfdd50000 0x0 0x100>; > - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 0>, <&dmac0 1>; > - pinctrl-0 = <&uart0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - pwm0: pwm@fdd70000 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfdd70000 0x0 0x10>; > - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm0m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm1: pwm@fdd70010 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfdd70010 0x0 0x10>; > - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm1m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm2: pwm@fdd70020 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfdd70020 0x0 0x10>; > - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm2m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm3: pwm@fdd70030 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfdd70030 0x0 0x10>; > - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm3_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pmu: power-management@fdd90000 { > - compatible = "rockchip,rk3568-pmu", "syscon", "simple-mfd"; > - reg = <0x0 0xfdd90000 0x0 0x1000>; > - > - power: power-controller { > - compatible = "rockchip,rk3568-power-controller"; > - #power-domain-cells = <1>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - /* These power domains are grouped by VD_GPU */ > - power-domain@RK3568_PD_GPU { > - reg = <RK3568_PD_GPU>; > - clocks = <&cru ACLK_GPU_PRE>, > - <&cru PCLK_GPU_PRE>; > - pm_qos = <&qos_gpu>; > - #power-domain-cells = <0>; > - }; > - > - /* These power domains are grouped by VD_LOGIC */ > - power-domain@RK3568_PD_VI { > - reg = <RK3568_PD_VI>; > - clocks = <&cru HCLK_VI>, > - <&cru PCLK_VI>; > - pm_qos = <&qos_isp>, > - <&qos_vicap0>, > - <&qos_vicap1>; > - #power-domain-cells = <0>; > - }; > - > - power-domain@RK3568_PD_VO { > - reg = <RK3568_PD_VO>; > - clocks = <&cru HCLK_VO>, > - <&cru PCLK_VO>, > - <&cru ACLK_VOP_PRE>; > - pm_qos = <&qos_hdcp>, > - <&qos_vop_m0>, > - <&qos_vop_m1>; > - #power-domain-cells = <0>; > - }; > - > - power-domain@RK3568_PD_RGA { > - reg = <RK3568_PD_RGA>; > - clocks = <&cru HCLK_RGA_PRE>, > - <&cru PCLK_RGA_PRE>; > - pm_qos = <&qos_ebc>, > - <&qos_iep>, > - <&qos_jpeg_dec>, > - <&qos_jpeg_enc>, > - <&qos_rga_rd>, > - <&qos_rga_wr>; > - #power-domain-cells = <0>; > - }; > - > - power-domain@RK3568_PD_VPU { > - reg = <RK3568_PD_VPU>; > - clocks = <&cru HCLK_VPU_PRE>; > - pm_qos = <&qos_vpu>; > - #power-domain-cells = <0>; > - }; > - > - power-domain@RK3568_PD_RKVDEC { > - clocks = <&cru HCLK_RKVDEC_PRE>; > - reg = <RK3568_PD_RKVDEC>; > - pm_qos = <&qos_rkvdec>; > - #power-domain-cells = <0>; > - }; > - > - power-domain@RK3568_PD_RKVENC { > - reg = <RK3568_PD_RKVENC>; > - clocks = <&cru HCLK_RKVENC_PRE>; > - pm_qos = <&qos_rkvenc_rd_m0>, > - <&qos_rkvenc_rd_m1>, > - <&qos_rkvenc_wr_m0>; > - #power-domain-cells = <0>; > - }; > - }; > - }; > - > - gpu: gpu@fde60000 { > - compatible = "rockchip,rk3568-mali", "arm,mali-bifrost"; > - reg = <0x0 0xfde60000 0x0 0x4000>; > - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "job", "mmu", "gpu"; > - clocks = <&scmi_clk 1>, <&cru CLK_GPU>; > - clock-names = "gpu", "bus"; > - #cooling-cells = <2>; > - operating-points-v2 = <&gpu_opp_table>; > - power-domains = <&power RK3568_PD_GPU>; > - status = "disabled"; > - }; > - > - vpu: video-codec@fdea0400 { > - compatible = "rockchip,rk3568-vpu"; > - reg = <0x0 0xfdea0000 0x0 0x800>; > - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; > - clock-names = "aclk", "hclk"; > - iommus = <&vdpu_mmu>; > - power-domains = <&power RK3568_PD_VPU>; > - }; > - > - vdpu_mmu: iommu@fdea0800 { > - compatible = "rockchip,rk3568-iommu"; > - reg = <0x0 0xfdea0800 0x0 0x40>; > - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; > - clock-names = "aclk", "iface"; > - clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; > - power-domains = <&power RK3568_PD_VPU>; > - #iommu-cells = <0>; > - }; > - > - rga: rga@fdeb0000 { > - compatible = "rockchip,rk3568-rga", "rockchip,rk3288-rga"; > - reg = <0x0 0xfdeb0000 0x0 0x180>; > - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru CLK_RGA_CORE>; > - clock-names = "aclk", "hclk", "sclk"; > - resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; > - reset-names = "core", "axi", "ahb"; > - power-domains = <&power RK3568_PD_RGA>; > - }; > - > - vepu: video-codec@fdee0000 { > - compatible = "rockchip,rk3568-vepu"; > - reg = <0x0 0xfdee0000 0x0 0x800>; > - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>; > - clock-names = "aclk", "hclk"; > - iommus = <&vepu_mmu>; > - power-domains = <&power RK3568_PD_RGA>; > - }; > - > - vepu_mmu: iommu@fdee0800 { > - compatible = "rockchip,rk3568-iommu"; > - reg = <0x0 0xfdee0800 0x0 0x40>; > - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>; > - clock-names = "aclk", "iface"; > - power-domains = <&power RK3568_PD_RGA>; > - #iommu-cells = <0>; > - }; > - > - sdmmc2: mmc@fe000000 { > - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; > - reg = <0x0 0xfe000000 0x0 0x4000>; > - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>, > - <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>; > - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; > - fifo-depth = <0x100>; > - max-frequency = <150000000>; > - resets = <&cru SRST_SDMMC2>; > - reset-names = "reset"; > - status = "disabled"; > - }; > - > - gmac1: ethernet@fe010000 { > - compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; > - reg = <0x0 0xfe010000 0x0 0x10000>; > - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "macirq", "eth_wake_irq"; > - clocks = <&cru SCLK_GMAC1>, <&cru SCLK_GMAC1_RX_TX>, > - <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_MAC1_REFOUT>, > - <&cru ACLK_GMAC1>, <&cru PCLK_GMAC1>, > - <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_GMAC1_PTP_REF>; > - clock-names = "stmmaceth", "mac_clk_rx", > - "mac_clk_tx", "clk_mac_refout", > - "aclk_mac", "pclk_mac", > - "clk_mac_speed", "ptp_ref"; > - resets = <&cru SRST_A_GMAC1>; > - reset-names = "stmmaceth"; > - rockchip,grf = <&grf>; > - snps,axi-config = <&gmac1_stmmac_axi_setup>; > - snps,mixed-burst; > - snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; > - snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; > - snps,tso; > - status = "disabled"; > - > - mdio1: mdio { > - compatible = "snps,dwmac-mdio"; > - #address-cells = <0x1>; > - #size-cells = <0x0>; > - }; > - > - gmac1_stmmac_axi_setup: stmmac-axi-config { > - snps,blen = <0 0 0 0 16 8 4>; > - snps,rd_osr_lmt = <8>; > - snps,wr_osr_lmt = <4>; > - }; > - > - gmac1_mtl_rx_setup: rx-queues-config { > - snps,rx-queues-to-use = <1>; > - queue0 {}; > - }; > - > - gmac1_mtl_tx_setup: tx-queues-config { > - snps,tx-queues-to-use = <1>; > - queue0 {}; > - }; > - }; > - > - vop: vop@fe040000 { > - reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>; > - reg-names = "vop", "gamma-lut"; > - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>, > - <&cru DCLK_VOP1>, <&cru DCLK_VOP2>; > - clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2"; > - iommus = <&vop_mmu>; > - power-domains = <&power RK3568_PD_VO>; > - rockchip,grf = <&grf>; > - status = "disabled"; > - > - vop_out: ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - vp0: port@0 { > - reg = <0>; > - #address-cells = <1>; > - #size-cells = <0>; > - }; > - > - vp1: port@1 { > - reg = <1>; > - #address-cells = <1>; > - #size-cells = <0>; > - }; > - > - vp2: port@2 { > - reg = <2>; > - #address-cells = <1>; > - #size-cells = <0>; > - }; > - }; > - }; > - > - vop_mmu: iommu@fe043e00 { > - compatible = "rockchip,rk3568-iommu"; > - reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>; > - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; > - clock-names = "aclk", "iface"; > - #iommu-cells = <0>; > - status = "disabled"; > - }; > - > - dsi0: dsi@fe060000 { > - compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; > - reg = <0x00 0xfe060000 0x00 0x10000>; > - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; > - clock-names = "pclk"; > - clocks = <&cru PCLK_DSITX_0>; > - phy-names = "dphy"; > - phys = <&dsi_dphy0>; > - power-domains = <&power RK3568_PD_VO>; > - reset-names = "apb"; > - resets = <&cru SRST_P_DSITX_0>; > - rockchip,grf = <&grf>; > - status = "disabled"; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - dsi0_in: port@0 { > - reg = <0>; > - }; > - > - dsi0_out: port@1 { > - reg = <1>; > - }; > - }; > - }; > - > - dsi1: dsi@fe070000 { > - compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; > - reg = <0x0 0xfe070000 0x0 0x10000>; > - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; > - clock-names = "pclk"; > - clocks = <&cru PCLK_DSITX_1>; > - phy-names = "dphy"; > - phys = <&dsi_dphy1>; > - power-domains = <&power RK3568_PD_VO>; > - reset-names = "apb"; > - resets = <&cru SRST_P_DSITX_1>; > - rockchip,grf = <&grf>; > - status = "disabled"; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - dsi1_in: port@0 { > - reg = <0>; > - }; > - > - dsi1_out: port@1 { > - reg = <1>; > - }; > - }; > - }; > - > - hdmi: hdmi@fe0a0000 { > - compatible = "rockchip,rk3568-dw-hdmi"; > - reg = <0x0 0xfe0a0000 0x0 0x20000>; > - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru PCLK_HDMI_HOST>, > - <&cru CLK_HDMI_SFR>, > - <&cru CLK_HDMI_CEC>, > - <&pmucru CLK_HDMI_REF>, > - <&cru HCLK_VO>; > - clock-names = "iahb", "isfr", "cec", "ref"; > - pinctrl-names = "default"; > - pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>; > - power-domains = <&power RK3568_PD_VO>; > - reg-io-width = <4>; > - rockchip,grf = <&grf>; > - #sound-dai-cells = <0>; > - status = "disabled"; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - hdmi_in: port@0 { > - reg = <0>; > - }; > - > - hdmi_out: port@1 { > - reg = <1>; > - }; > - }; > - }; > - > - qos_gpu: qos@fe128000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe128000 0x0 0x20>; > - }; > - > - qos_rkvenc_rd_m0: qos@fe138080 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe138080 0x0 0x20>; > - }; > - > - qos_rkvenc_rd_m1: qos@fe138100 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe138100 0x0 0x20>; > - }; > - > - qos_rkvenc_wr_m0: qos@fe138180 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe138180 0x0 0x20>; > - }; > - > - qos_isp: qos@fe148000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe148000 0x0 0x20>; > - }; > - > - qos_vicap0: qos@fe148080 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe148080 0x0 0x20>; > - }; > - > - qos_vicap1: qos@fe148100 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe148100 0x0 0x20>; > - }; > - > - qos_vpu: qos@fe150000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe150000 0x0 0x20>; > - }; > - > - qos_ebc: qos@fe158000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe158000 0x0 0x20>; > - }; > - > - qos_iep: qos@fe158100 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe158100 0x0 0x20>; > - }; > - > - qos_jpeg_dec: qos@fe158180 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe158180 0x0 0x20>; > - }; > - > - qos_jpeg_enc: qos@fe158200 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe158200 0x0 0x20>; > - }; > - > - qos_rga_rd: qos@fe158280 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe158280 0x0 0x20>; > - }; > - > - qos_rga_wr: qos@fe158300 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe158300 0x0 0x20>; > - }; > - > - qos_npu: qos@fe180000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe180000 0x0 0x20>; > - }; > - > - qos_pcie2x1: qos@fe190000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190000 0x0 0x20>; > - }; > - > - qos_sata1: qos@fe190280 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190280 0x0 0x20>; > - }; > - > - qos_sata2: qos@fe190300 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190300 0x0 0x20>; > - }; > - > - qos_usb3_0: qos@fe190380 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190380 0x0 0x20>; > - }; > - > - qos_usb3_1: qos@fe190400 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190400 0x0 0x20>; > - }; > - > - qos_rkvdec: qos@fe198000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe198000 0x0 0x20>; > - }; > - > - qos_hdcp: qos@fe1a8000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe1a8000 0x0 0x20>; > - }; > - > - qos_vop_m0: qos@fe1a8080 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe1a8080 0x0 0x20>; > - }; > - > - qos_vop_m1: qos@fe1a8100 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe1a8100 0x0 0x20>; > - }; > - > - dfi: dfi@fe230000 { > - compatible = "rockchip,rk3568-dfi"; > - reg = <0x00 0xfe230000 0x00 0x400>; > - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > - rockchip,pmu = <&pmugrf>; > - }; > - > - pcie2x1: pcie@fe260000 { > - compatible = "rockchip,rk3568-pcie"; > - reg = <0x3 0xc0000000 0x0 0x00400000>, > - <0x0 0xfe260000 0x0 0x00010000>, > - <0x0 0xf4000000 0x0 0x00100000>; > - reg-names = "dbi", "apb", "config"; > - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; > - bus-range = <0x0 0xf>; > - clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>, > - <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>, > - <&cru CLK_PCIE20_AUX_NDFT>; > - clock-names = "aclk_mst", "aclk_slv", > - "aclk_dbi", "pclk", "aux"; > - device_type = "pci"; > - #interrupt-cells = <1>; > - interrupt-map-mask = <0 0 0 7>; > - interrupt-map = <0 0 0 1 &pcie_intc 0>, > - <0 0 0 2 &pcie_intc 1>, > - <0 0 0 3 &pcie_intc 2>, > - <0 0 0 4 &pcie_intc 3>; > - linux,pci-domain = <0>; > - num-ib-windows = <6>; > - num-ob-windows = <2>; > - max-link-speed = <2>; > - msi-map = <0x0 &gic 0x0 0x1000>; > - num-lanes = <1>; > - phys = <&combphy2 PHY_TYPE_PCIE>; > - phy-names = "pcie-phy"; > - power-domains = <&power RK3568_PD_PIPE>; > - ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>, > - <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x01e00000>, > - <0x03000000 0x0 0x40000000 0x3 0x00000000 0x0 0x40000000>; > - resets = <&cru SRST_PCIE20_POWERUP>; > - reset-names = "pipe"; > - #address-cells = <3>; > - #size-cells = <2>; > - status = "disabled"; > - > - pcie_intc: legacy-interrupt-controller { > - #address-cells = <0>; > - #interrupt-cells = <1>; > - interrupt-controller; > - interrupt-parent = <&gic>; > - interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; > - }; > - }; > - > - sdmmc0: mmc@fe2b0000 { > - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; > - reg = <0x0 0xfe2b0000 0x0 0x4000>; > - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>, > - <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>; > - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; > - fifo-depth = <0x100>; > - max-frequency = <150000000>; > - resets = <&cru SRST_SDMMC0>; > - reset-names = "reset"; > - status = "disabled"; > - }; > - > - sdmmc1: mmc@fe2c0000 { > - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; > - reg = <0x0 0xfe2c0000 0x0 0x4000>; > - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>, > - <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>; > - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; > - fifo-depth = <0x100>; > - max-frequency = <150000000>; > - resets = <&cru SRST_SDMMC1>; > - reset-names = "reset"; > - status = "disabled"; > - }; > - > - sfc: spi@fe300000 { > - compatible = "rockchip,sfc"; > - reg = <0x0 0xfe300000 0x0 0x4000>; > - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; > - clock-names = "clk_sfc", "hclk_sfc"; > - pinctrl-0 = <&fspi_pins>; > - pinctrl-names = "default"; > - status = "disabled"; > - }; > - > - sdhci: mmc@fe310000 { > - compatible = "rockchip,rk3568-dwcmshc"; > - reg = <0x0 0xfe310000 0x0 0x10000>; > - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > - assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>; > - assigned-clock-rates = <200000000>, <24000000>; > - clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>, > - <&cru ACLK_EMMC>, <&cru BCLK_EMMC>, > - <&cru TCLK_EMMC>; > - clock-names = "core", "bus", "axi", "block", "timer"; > - status = "disabled"; > - }; > - > - i2s0_8ch: i2s@fe400000 { > - compatible = "rockchip,rk3568-i2s-tdm"; > - reg = <0x0 0xfe400000 0x0 0x1000>; > - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > - assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; > - assigned-clock-rates = <1188000000>, <1188000000>; > - clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; > - clock-names = "mclk_tx", "mclk_rx", "hclk"; > - dmas = <&dmac1 0>; > - dma-names = "tx"; > - resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; > - reset-names = "tx-m", "rx-m"; > - rockchip,grf = <&grf>; > - #sound-dai-cells = <0>; > - status = "disabled"; > - }; > - > - i2s1_8ch: i2s@fe410000 { > - compatible = "rockchip,rk3568-i2s-tdm"; > - reg = <0x0 0xfe410000 0x0 0x1000>; > - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; > - assigned-clocks = <&cru CLK_I2S1_8CH_TX_SRC>, <&cru CLK_I2S1_8CH_RX_SRC>; > - assigned-clock-rates = <1188000000>, <1188000000>; > - clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, > - <&cru HCLK_I2S1_8CH>; > - clock-names = "mclk_tx", "mclk_rx", "hclk"; > - dmas = <&dmac1 3>, <&dmac1 2>; > - dma-names = "rx", "tx"; > - resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; > - reset-names = "tx-m", "rx-m"; > - rockchip,grf = <&grf>; > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx > - &i2s1m0_lrcktx &i2s1m0_lrckrx > - &i2s1m0_sdi0 &i2s1m0_sdi1 > - &i2s1m0_sdi2 &i2s1m0_sdi3 > - &i2s1m0_sdo0 &i2s1m0_sdo1 > - &i2s1m0_sdo2 &i2s1m0_sdo3>; > - #sound-dai-cells = <0>; > - status = "disabled"; > - }; > - > - i2s2_2ch: i2s@fe420000 { > - compatible = "rockchip,rk3568-i2s-tdm"; > - reg = <0x0 0xfe420000 0x0 0x1000>; > - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; > - assigned-clocks = <&cru CLK_I2S2_2CH_SRC>; > - assigned-clock-rates = <1188000000>; > - clocks = <&cru MCLK_I2S2_2CH>, <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>; > - clock-names = "mclk_tx", "mclk_rx", "hclk"; > - dmas = <&dmac1 4>, <&dmac1 5>; > - dma-names = "tx", "rx"; > - resets = <&cru SRST_M_I2S2_2CH>; > - reset-names = "m"; > - rockchip,grf = <&grf>; > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s2m0_sclktx > - &i2s2m0_lrcktx > - &i2s2m0_sdi > - &i2s2m0_sdo>; > - #sound-dai-cells = <0>; > - status = "disabled"; > - }; > - > - i2s3_2ch: i2s@fe430000 { > - compatible = "rockchip,rk3568-i2s-tdm"; > - reg = <0x0 0xfe430000 0x0 0x1000>; > - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru MCLK_I2S3_2CH_TX>, <&cru MCLK_I2S3_2CH_RX>, > - <&cru HCLK_I2S3_2CH>; > - clock-names = "mclk_tx", "mclk_rx", "hclk"; > - dmas = <&dmac1 6>, <&dmac1 7>; > - dma-names = "tx", "rx"; > - resets = <&cru SRST_M_I2S3_2CH_TX>, <&cru SRST_M_I2S3_2CH_RX>; > - reset-names = "tx-m", "rx-m"; > - rockchip,grf = <&grf>; > - #sound-dai-cells = <0>; > - status = "disabled"; > - }; > - > - pdm: pdm@fe440000 { > - compatible = "rockchip,rk3568-pdm"; > - reg = <0x0 0xfe440000 0x0 0x1000>; > - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru MCLK_PDM>, <&cru HCLK_PDM>; > - clock-names = "pdm_clk", "pdm_hclk"; > - dmas = <&dmac1 9>; > - dma-names = "rx"; > - pinctrl-0 = <&pdmm0_clk > - &pdmm0_clk1 > - &pdmm0_sdi0 > - &pdmm0_sdi1 > - &pdmm0_sdi2 > - &pdmm0_sdi3>; > - pinctrl-names = "default"; > - resets = <&cru SRST_M_PDM>; > - reset-names = "pdm-m"; > - #sound-dai-cells = <0>; > - status = "disabled"; > - }; > - > - spdif: spdif@fe460000 { > - compatible = "rockchip,rk3568-spdif"; > - reg = <0x0 0xfe460000 0x0 0x1000>; > - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; > - clock-names = "mclk", "hclk"; > - clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>; > - dmas = <&dmac1 1>; > - dma-names = "tx"; > - pinctrl-names = "default"; > - pinctrl-0 = <&spdifm0_tx>; > - #sound-dai-cells = <0>; > - status = "disabled"; > - }; > - > - dmac0: dma-controller@fe530000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x0 0xfe530000 0x0 0x4000>; > - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > - arm,pl330-periph-burst; > - clocks = <&cru ACLK_BUS>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - }; > - > - dmac1: dma-controller@fe550000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x0 0xfe550000 0x0 0x4000>; > - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; > - arm,pl330-periph-burst; > - clocks = <&cru ACLK_BUS>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - }; > - > - i2c1: i2c@fe5a0000 { > - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; > - reg = <0x0 0xfe5a0000 0x0 0x1000>; > - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; > - clock-names = "i2c", "pclk"; > - pinctrl-0 = <&i2c1_xfer>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c2: i2c@fe5b0000 { > - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; > - reg = <0x0 0xfe5b0000 0x0 0x1000>; > - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; > - clock-names = "i2c", "pclk"; > - pinctrl-0 = <&i2c2m0_xfer>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c3: i2c@fe5c0000 { > - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; > - reg = <0x0 0xfe5c0000 0x0 0x1000>; > - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; > - clock-names = "i2c", "pclk"; > - pinctrl-0 = <&i2c3m0_xfer>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c4: i2c@fe5d0000 { > - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; > - reg = <0x0 0xfe5d0000 0x0 0x1000>; > - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>; > - clock-names = "i2c", "pclk"; > - pinctrl-0 = <&i2c4m0_xfer>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c5: i2c@fe5e0000 { > - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; > - reg = <0x0 0xfe5e0000 0x0 0x1000>; > - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>; > - clock-names = "i2c", "pclk"; > - pinctrl-0 = <&i2c5m0_xfer>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - wdt: watchdog@fe600000 { > - compatible = "rockchip,rk3568-wdt", "snps,dw-wdt"; > - reg = <0x0 0xfe600000 0x0 0x100>; > - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>; > - clock-names = "tclk", "pclk"; > - }; > - > - spi0: spi@fe610000 { > - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi"; > - reg = <0x0 0xfe610000 0x0 0x1000>; > - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>; > - clock-names = "spiclk", "apb_pclk"; > - dmas = <&dmac0 20>, <&dmac0 21>; > - dma-names = "tx", "rx"; > - pinctrl-names = "default"; > - pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - spi1: spi@fe620000 { > - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi"; > - reg = <0x0 0xfe620000 0x0 0x1000>; > - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>; > - clock-names = "spiclk", "apb_pclk"; > - dmas = <&dmac0 22>, <&dmac0 23>; > - dma-names = "tx", "rx"; > - pinctrl-names = "default"; > - pinctrl-0 = <&spi1m0_cs0 &spi1m0_cs1 &spi1m0_pins>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - spi2: spi@fe630000 { > - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi"; > - reg = <0x0 0xfe630000 0x0 0x1000>; > - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>; > - clock-names = "spiclk", "apb_pclk"; > - dmas = <&dmac0 24>, <&dmac0 25>; > - dma-names = "tx", "rx"; > - pinctrl-names = "default"; > - pinctrl-0 = <&spi2m0_cs0 &spi2m0_cs1 &spi2m0_pins>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - spi3: spi@fe640000 { > - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi"; > - reg = <0x0 0xfe640000 0x0 0x1000>; > - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>; > - clock-names = "spiclk", "apb_pclk"; > - dmas = <&dmac0 26>, <&dmac0 27>; > - dma-names = "tx", "rx"; > - pinctrl-names = "default"; > - pinctrl-0 = <&spi3m0_cs0 &spi3m0_cs1 &spi3m0_pins>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - uart1: serial@fe650000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe650000 0x0 0x100>; > - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 2>, <&dmac0 3>; > - pinctrl-0 = <&uart1m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart2: serial@fe660000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe660000 0x0 0x100>; > - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 4>, <&dmac0 5>; > - pinctrl-0 = <&uart2m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart3: serial@fe670000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe670000 0x0 0x100>; > - interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 6>, <&dmac0 7>; > - pinctrl-0 = <&uart3m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart4: serial@fe680000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe680000 0x0 0x100>; > - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 8>, <&dmac0 9>; > - pinctrl-0 = <&uart4m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart5: serial@fe690000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe690000 0x0 0x100>; > - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 10>, <&dmac0 11>; > - pinctrl-0 = <&uart5m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart6: serial@fe6a0000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe6a0000 0x0 0x100>; > - interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 12>, <&dmac0 13>; > - pinctrl-0 = <&uart6m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart7: serial@fe6b0000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe6b0000 0x0 0x100>; > - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 14>, <&dmac0 15>; > - pinctrl-0 = <&uart7m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart8: serial@fe6c0000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe6c0000 0x0 0x100>; > - interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 16>, <&dmac0 17>; > - pinctrl-0 = <&uart8m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart9: serial@fe6d0000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe6d0000 0x0 0x100>; > - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 18>, <&dmac0 19>; > - pinctrl-0 = <&uart9m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - thermal_zones: thermal-zones { > - cpu_thermal: cpu-thermal { > - polling-delay-passive = <100>; > - polling-delay = <1000>; > - > - thermal-sensors = <&tsadc 0>; > - > - trips { > - cpu_alert0: cpu_alert0 { > - temperature = <70000>; > - hysteresis = <2000>; > - type = "passive"; > - }; > - cpu_alert1: cpu_alert1 { > - temperature = <75000>; > - hysteresis = <2000>; > - type = "passive"; > - }; > - cpu_crit: cpu_crit { > - temperature = <95000>; > - hysteresis = <2000>; > - type = "critical"; > - }; > - }; > - > - cooling-maps { > - map0 { > - trip = <&cpu_alert0>; > - cooling-device = > - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > - }; > - > - gpu_thermal: gpu-thermal { > - polling-delay-passive = <20>; /* milliseconds */ > - polling-delay = <1000>; /* milliseconds */ > - > - thermal-sensors = <&tsadc 1>; > - > - trips { > - gpu_threshold: gpu-threshold { > - temperature = <70000>; > - hysteresis = <2000>; > - type = "passive"; > - }; > - gpu_target: gpu-target { > - temperature = <75000>; > - hysteresis = <2000>; > - type = "passive"; > - }; > - gpu_crit: gpu-crit { > - temperature = <95000>; > - hysteresis = <2000>; > - type = "critical"; > - }; > - }; > - > - cooling-maps { > - map0 { > - trip = <&gpu_target>; > - cooling-device = > - <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > - }; > - }; > - > - tsadc: tsadc@fe710000 { > - compatible = "rockchip,rk3568-tsadc"; > - reg = <0x0 0xfe710000 0x0 0x100>; > - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; > - assigned-clocks = <&cru CLK_TSADC_TSEN>, <&cru CLK_TSADC>; > - assigned-clock-rates = <17000000>, <700000>; > - clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; > - clock-names = "tsadc", "apb_pclk"; > - resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>, > - <&cru SRST_TSADCPHY>; > - rockchip,grf = <&grf>; > - rockchip,hw-tshut-temp = <95000>; > - pinctrl-names = "init", "default", "sleep"; > - pinctrl-0 = <&tsadc_pin>; > - pinctrl-1 = <&tsadc_shutorg>; > - pinctrl-2 = <&tsadc_pin>; > - #thermal-sensor-cells = <1>; > - status = "disabled"; > - }; > - > - saradc: saradc@fe720000 { > - compatible = "rockchip,rk3568-saradc", "rockchip,rk3399-saradc"; > - reg = <0x0 0xfe720000 0x0 0x100>; > - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; > - clock-names = "saradc", "apb_pclk"; > - resets = <&cru SRST_P_SARADC>; > - reset-names = "saradc-apb"; > - #io-channel-cells = <1>; > - status = "disabled"; > - }; > - > - pwm4: pwm@fe6e0000 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6e0000 0x0 0x10>; > - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm4_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm5: pwm@fe6e0010 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6e0010 0x0 0x10>; > - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm5_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm6: pwm@fe6e0020 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6e0020 0x0 0x10>; > - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm6_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm7: pwm@fe6e0030 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6e0030 0x0 0x10>; > - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm7_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm8: pwm@fe6f0000 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6f0000 0x0 0x10>; > - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm8m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm9: pwm@fe6f0010 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6f0010 0x0 0x10>; > - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm9m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm10: pwm@fe6f0020 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6f0020 0x0 0x10>; > - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm10m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm11: pwm@fe6f0030 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6f0030 0x0 0x10>; > - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm11m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm12: pwm@fe700000 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe700000 0x0 0x10>; > - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm12m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm13: pwm@fe700010 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe700010 0x0 0x10>; > - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm13m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm14: pwm@fe700020 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe700020 0x0 0x10>; > - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm14m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm15: pwm@fe700030 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe700030 0x0 0x10>; > - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm15m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - combphy1: phy@fe830000 { > - compatible = "rockchip,rk3568-naneng-combphy"; > - reg = <0x0 0xfe830000 0x0 0x100>; > - clocks = <&pmucru CLK_PCIEPHY1_REF>, > - <&cru PCLK_PIPEPHY1>, > - <&cru PCLK_PIPE>; > - clock-names = "ref", "apb", "pipe"; > - assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>; > - assigned-clock-rates = <100000000>; > - resets = <&cru SRST_PIPEPHY1>; > - rockchip,pipe-grf = <&pipegrf>; > - rockchip,pipe-phy-grf = <&pipe_phy_grf1>; > - #phy-cells = <1>; > - status = "disabled"; > - }; > - > - combphy2: phy@fe840000 { > - compatible = "rockchip,rk3568-naneng-combphy"; > - reg = <0x0 0xfe840000 0x0 0x100>; > - clocks = <&pmucru CLK_PCIEPHY2_REF>, > - <&cru PCLK_PIPEPHY2>, > - <&cru PCLK_PIPE>; > - clock-names = "ref", "apb", "pipe"; > - assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>; > - assigned-clock-rates = <100000000>; > - resets = <&cru SRST_PIPEPHY2>; > - rockchip,pipe-grf = <&pipegrf>; > - rockchip,pipe-phy-grf = <&pipe_phy_grf2>; > - #phy-cells = <1>; > - status = "disabled"; > - }; > - > - csi_dphy: phy@fe870000 { > - compatible = "rockchip,rk3568-csi-dphy"; > - reg = <0x0 0xfe870000 0x0 0x10000>; > - clocks = <&cru PCLK_MIPICSIPHY>; > - clock-names = "pclk"; > - #phy-cells = <0>; > - resets = <&cru SRST_P_MIPICSIPHY>; > - reset-names = "apb"; > - rockchip,grf = <&grf>; > - status = "disabled"; > - }; > - > - dsi_dphy0: mipi-dphy@fe850000 { > - compatible = "rockchip,rk3568-dsi-dphy"; > - reg = <0x0 0xfe850000 0x0 0x10000>; > - clock-names = "ref", "pclk"; > - clocks = <&pmucru CLK_MIPIDSIPHY0_REF>, <&cru PCLK_MIPIDSIPHY0>; > - #phy-cells = <0>; > - power-domains = <&power RK3568_PD_VO>; > - reset-names = "apb"; > - resets = <&cru SRST_P_MIPIDSIPHY0>; > - status = "disabled"; > - }; > - > - dsi_dphy1: mipi-dphy@fe860000 { > - compatible = "rockchip,rk3568-dsi-dphy"; > - reg = <0x0 0xfe860000 0x0 0x10000>; > - clock-names = "ref", "pclk"; > - clocks = <&pmucru CLK_MIPIDSIPHY1_REF>, <&cru PCLK_MIPIDSIPHY1>; > - #phy-cells = <0>; > - power-domains = <&power RK3568_PD_VO>; > - reset-names = "apb"; > - resets = <&cru SRST_P_MIPIDSIPHY1>; > - status = "disabled"; > - }; > - > - usb2phy0: usb2phy@fe8a0000 { > - compatible = "rockchip,rk3568-usb2phy"; > - reg = <0x0 0xfe8a0000 0x0 0x10000>; > - clocks = <&pmucru CLK_USBPHY0_REF>; > - clock-names = "phyclk"; > - clock-output-names = "clk_usbphy0_480m"; > - interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; > - rockchip,usbgrf = <&usb2phy0_grf>; > - #clock-cells = <0>; > - status = "disabled"; > - > - usb2phy0_host: host-port { > - #phy-cells = <0>; > - status = "disabled"; > - }; > - > - usb2phy0_otg: otg-port { > - #phy-cells = <0>; > - status = "disabled"; > - }; > - }; > - > - usb2phy1: usb2phy@fe8b0000 { > - compatible = "rockchip,rk3568-usb2phy"; > - reg = <0x0 0xfe8b0000 0x0 0x10000>; > - clocks = <&pmucru CLK_USBPHY1_REF>; > - clock-names = "phyclk"; > - clock-output-names = "clk_usbphy1_480m"; > - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; > - rockchip,usbgrf = <&usb2phy1_grf>; > - #clock-cells = <0>; > - status = "disabled"; > - > - usb2phy1_host: host-port { > - #phy-cells = <0>; > - status = "disabled"; > - }; > - > - usb2phy1_otg: otg-port { > - #phy-cells = <0>; > - status = "disabled"; > - }; > - }; > - > - pinctrl: pinctrl { > - compatible = "rockchip,rk3568-pinctrl"; > - rockchip,grf = <&grf>; > - rockchip,pmu = <&pmugrf>; > - #address-cells = <2>; > - #size-cells = <2>; > - ranges; > - > - gpio0: gpio@fdd60000 { > - compatible = "rockchip,gpio-bank"; > - reg = <0x0 0xfdd60000 0x0 0x100>; > - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; > - gpio-controller; > - gpio-ranges = <&pinctrl 0 0 32>; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <2>; > - }; > - > - gpio1: gpio@fe740000 { > - compatible = "rockchip,gpio-bank"; > - reg = <0x0 0xfe740000 0x0 0x100>; > - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; > - gpio-controller; > - gpio-ranges = <&pinctrl 0 32 32>; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <2>; > - }; > - > - gpio2: gpio@fe750000 { > - compatible = "rockchip,gpio-bank"; > - reg = <0x0 0xfe750000 0x0 0x100>; > - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; > - gpio-controller; > - gpio-ranges = <&pinctrl 0 64 32>; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <2>; > - }; > - > - gpio3: gpio@fe760000 { > - compatible = "rockchip,gpio-bank"; > - reg = <0x0 0xfe760000 0x0 0x100>; > - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; > - gpio-controller; > - gpio-ranges = <&pinctrl 0 96 32>; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <2>; > - }; > - > - gpio4: gpio@fe770000 { > - compatible = "rockchip,gpio-bank"; > - reg = <0x0 0xfe770000 0x0 0x100>; > - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; > - gpio-controller; > - gpio-ranges = <&pinctrl 0 128 32>; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <2>; > - }; > - }; > -}; > - > -#include "rk3568-pinctrl.dtsi" > diff --git a/include/dt-bindings/clock/rk3568-cru.h b/include/dt-bindings/clock/rk3568-cru.h > deleted file mode 100644 > index d29890865150..000000000000 > --- a/include/dt-bindings/clock/rk3568-cru.h > +++ /dev/null > @@ -1,926 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0 */ > -/* > - * Copyright (c) 2021 Rockchip Electronics Co. Ltd. > - * Author: Elaine Zhang <zhangqing@rock-chips.com> > - */ > - > -#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3568_H > -#define _DT_BINDINGS_CLK_ROCKCHIP_RK3568_H > - > -/* pmucru-clocks indices */ > - > -/* pmucru plls */ > -#define PLL_PPLL 1 > -#define PLL_HPLL 2 > - > -/* pmucru clocks */ > -#define XIN_OSC0_DIV 4 > -#define CLK_RTC_32K 5 > -#define CLK_PMU 6 > -#define CLK_I2C0 7 > -#define CLK_RTC32K_FRAC 8 > -#define CLK_UART0_DIV 9 > -#define CLK_UART0_FRAC 10 > -#define SCLK_UART0 11 > -#define DBCLK_GPIO0 12 > -#define CLK_PWM0 13 > -#define CLK_CAPTURE_PWM0_NDFT 14 > -#define CLK_PMUPVTM 15 > -#define CLK_CORE_PMUPVTM 16 > -#define CLK_REF24M 17 > -#define XIN_OSC0_USBPHY0_G 18 > -#define CLK_USBPHY0_REF 19 > -#define XIN_OSC0_USBPHY1_G 20 > -#define CLK_USBPHY1_REF 21 > -#define XIN_OSC0_MIPIDSIPHY0_G 22 > -#define CLK_MIPIDSIPHY0_REF 23 > -#define XIN_OSC0_MIPIDSIPHY1_G 24 > -#define CLK_MIPIDSIPHY1_REF 25 > -#define CLK_WIFI_DIV 26 > -#define CLK_WIFI_OSC0 27 > -#define CLK_WIFI 28 > -#define CLK_PCIEPHY0_DIV 29 > -#define CLK_PCIEPHY0_OSC0 30 > -#define CLK_PCIEPHY0_REF 31 > -#define CLK_PCIEPHY1_DIV 32 > -#define CLK_PCIEPHY1_OSC0 33 > -#define CLK_PCIEPHY1_REF 34 > -#define CLK_PCIEPHY2_DIV 35 > -#define CLK_PCIEPHY2_OSC0 36 > -#define CLK_PCIEPHY2_REF 37 > -#define CLK_PCIE30PHY_REF_M 38 > -#define CLK_PCIE30PHY_REF_N 39 > -#define CLK_HDMI_REF 40 > -#define XIN_OSC0_EDPPHY_G 41 > -#define PCLK_PDPMU 42 > -#define PCLK_PMU 43 > -#define PCLK_UART0 44 > -#define PCLK_I2C0 45 > -#define PCLK_GPIO0 46 > -#define PCLK_PMUPVTM 47 > -#define PCLK_PWM0 48 > -#define CLK_PDPMU 49 > -#define SCLK_32K_IOE 50 > - > -#define CLKPMU_NR_CLKS (SCLK_32K_IOE + 1) > - > -/* cru-clocks indices */ > - > -/* cru plls */ > -#define PLL_APLL 1 > -#define PLL_DPLL 2 > -#define PLL_CPLL 3 > -#define PLL_GPLL 4 > -#define PLL_VPLL 5 > -#define PLL_NPLL 6 > - > -/* cru clocks */ > -#define CPLL_333M 9 > -#define ARMCLK 10 > -#define USB480M 11 > -#define ACLK_CORE_NIU2BUS 18 > -#define CLK_CORE_PVTM 19 > -#define CLK_CORE_PVTM_CORE 20 > -#define CLK_CORE_PVTPLL 21 > -#define CLK_GPU_SRC 22 > -#define CLK_GPU_PRE_NDFT 23 > -#define CLK_GPU_PRE_MUX 24 > -#define ACLK_GPU_PRE 25 > -#define PCLK_GPU_PRE 26 > -#define CLK_GPU 27 > -#define CLK_GPU_NP5 28 > -#define PCLK_GPU_PVTM 29 > -#define CLK_GPU_PVTM 30 > -#define CLK_GPU_PVTM_CORE 31 > -#define CLK_GPU_PVTPLL 32 > -#define CLK_NPU_SRC 33 > -#define CLK_NPU_PRE_NDFT 34 > -#define CLK_NPU 35 > -#define CLK_NPU_NP5 36 > -#define HCLK_NPU_PRE 37 > -#define PCLK_NPU_PRE 38 > -#define ACLK_NPU_PRE 39 > -#define ACLK_NPU 40 > -#define HCLK_NPU 41 > -#define PCLK_NPU_PVTM 42 > -#define CLK_NPU_PVTM 43 > -#define CLK_NPU_PVTM_CORE 44 > -#define CLK_NPU_PVTPLL 45 > -#define CLK_DDRPHY1X_SRC 46 > -#define CLK_DDRPHY1X_HWFFC_SRC 47 > -#define CLK_DDR1X 48 > -#define CLK_MSCH 49 > -#define CLK24_DDRMON 50 > -#define ACLK_GIC_AUDIO 51 > -#define HCLK_GIC_AUDIO 52 > -#define HCLK_SDMMC_BUFFER 53 > -#define DCLK_SDMMC_BUFFER 54 > -#define ACLK_GIC600 55 > -#define ACLK_SPINLOCK 56 > -#define HCLK_I2S0_8CH 57 > -#define HCLK_I2S1_8CH 58 > -#define HCLK_I2S2_2CH 59 > -#define HCLK_I2S3_2CH 60 > -#define CLK_I2S0_8CH_TX_SRC 61 > -#define CLK_I2S0_8CH_TX_FRAC 62 > -#define MCLK_I2S0_8CH_TX 63 > -#define I2S0_MCLKOUT_TX 64 > -#define CLK_I2S0_8CH_RX_SRC 65 > -#define CLK_I2S0_8CH_RX_FRAC 66 > -#define MCLK_I2S0_8CH_RX 67 > -#define I2S0_MCLKOUT_RX 68 > -#define CLK_I2S1_8CH_TX_SRC 69 > -#define CLK_I2S1_8CH_TX_FRAC 70 > -#define MCLK_I2S1_8CH_TX 71 > -#define I2S1_MCLKOUT_TX 72 > -#define CLK_I2S1_8CH_RX_SRC 73 > -#define CLK_I2S1_8CH_RX_FRAC 74 > -#define MCLK_I2S1_8CH_RX 75 > -#define I2S1_MCLKOUT_RX 76 > -#define CLK_I2S2_2CH_SRC 77 > -#define CLK_I2S2_2CH_FRAC 78 > -#define MCLK_I2S2_2CH 79 > -#define I2S2_MCLKOUT 80 > -#define CLK_I2S3_2CH_TX_SRC 81 > -#define CLK_I2S3_2CH_TX_FRAC 82 > -#define MCLK_I2S3_2CH_TX 83 > -#define I2S3_MCLKOUT_TX 84 > -#define CLK_I2S3_2CH_RX_SRC 85 > -#define CLK_I2S3_2CH_RX_FRAC 86 > -#define MCLK_I2S3_2CH_RX 87 > -#define I2S3_MCLKOUT_RX 88 > -#define HCLK_PDM 89 > -#define MCLK_PDM 90 > -#define HCLK_VAD 91 > -#define HCLK_SPDIF_8CH 92 > -#define MCLK_SPDIF_8CH_SRC 93 > -#define MCLK_SPDIF_8CH_FRAC 94 > -#define MCLK_SPDIF_8CH 95 > -#define HCLK_AUDPWM 96 > -#define SCLK_AUDPWM_SRC 97 > -#define SCLK_AUDPWM_FRAC 98 > -#define SCLK_AUDPWM 99 > -#define HCLK_ACDCDIG 100 > -#define CLK_ACDCDIG_I2C 101 > -#define CLK_ACDCDIG_DAC 102 > -#define CLK_ACDCDIG_ADC 103 > -#define ACLK_SECURE_FLASH 104 > -#define HCLK_SECURE_FLASH 105 > -#define ACLK_CRYPTO_NS 106 > -#define HCLK_CRYPTO_NS 107 > -#define CLK_CRYPTO_NS_CORE 108 > -#define CLK_CRYPTO_NS_PKA 109 > -#define CLK_CRYPTO_NS_RNG 110 > -#define HCLK_TRNG_NS 111 > -#define CLK_TRNG_NS 112 > -#define PCLK_OTPC_NS 113 > -#define CLK_OTPC_NS_SBPI 114 > -#define CLK_OTPC_NS_USR 115 > -#define HCLK_NANDC 116 > -#define NCLK_NANDC 117 > -#define HCLK_SFC 118 > -#define HCLK_SFC_XIP 119 > -#define SCLK_SFC 120 > -#define ACLK_EMMC 121 > -#define HCLK_EMMC 122 > -#define BCLK_EMMC 123 > -#define CCLK_EMMC 124 > -#define TCLK_EMMC 125 > -#define ACLK_PIPE 126 > -#define PCLK_PIPE 127 > -#define PCLK_PIPE_GRF 128 > -#define ACLK_PCIE20_MST 129 > -#define ACLK_PCIE20_SLV 130 > -#define ACLK_PCIE20_DBI 131 > -#define PCLK_PCIE20 132 > -#define CLK_PCIE20_AUX_NDFT 133 > -#define CLK_PCIE20_AUX_DFT 134 > -#define CLK_PCIE20_PIPE_DFT 135 > -#define ACLK_PCIE30X1_MST 136 > -#define ACLK_PCIE30X1_SLV 137 > -#define ACLK_PCIE30X1_DBI 138 > -#define PCLK_PCIE30X1 139 > -#define CLK_PCIE30X1_AUX_NDFT 140 > -#define CLK_PCIE30X1_AUX_DFT 141 > -#define CLK_PCIE30X1_PIPE_DFT 142 > -#define ACLK_PCIE30X2_MST 143 > -#define ACLK_PCIE30X2_SLV 144 > -#define ACLK_PCIE30X2_DBI 145 > -#define PCLK_PCIE30X2 146 > -#define CLK_PCIE30X2_AUX_NDFT 147 > -#define CLK_PCIE30X2_AUX_DFT 148 > -#define CLK_PCIE30X2_PIPE_DFT 149 > -#define ACLK_SATA0 150 > -#define CLK_SATA0_PMALIVE 151 > -#define CLK_SATA0_RXOOB 152 > -#define CLK_SATA0_PIPE_NDFT 153 > -#define CLK_SATA0_PIPE_DFT 154 > -#define ACLK_SATA1 155 > -#define CLK_SATA1_PMALIVE 156 > -#define CLK_SATA1_RXOOB 157 > -#define CLK_SATA1_PIPE_NDFT 158 > -#define CLK_SATA1_PIPE_DFT 159 > -#define ACLK_SATA2 160 > -#define CLK_SATA2_PMALIVE 161 > -#define CLK_SATA2_RXOOB 162 > -#define CLK_SATA2_PIPE_NDFT 163 > -#define CLK_SATA2_PIPE_DFT 164 > -#define ACLK_USB3OTG0 165 > -#define CLK_USB3OTG0_REF 166 > -#define CLK_USB3OTG0_SUSPEND 167 > -#define ACLK_USB3OTG1 168 > -#define CLK_USB3OTG1_REF 169 > -#define CLK_USB3OTG1_SUSPEND 170 > -#define CLK_XPCS_EEE 171 > -#define PCLK_XPCS 172 > -#define ACLK_PHP 173 > -#define HCLK_PHP 174 > -#define PCLK_PHP 175 > -#define HCLK_SDMMC0 176 > -#define CLK_SDMMC0 177 > -#define HCLK_SDMMC1 178 > -#define CLK_SDMMC1 179 > -#define ACLK_GMAC0 180 > -#define PCLK_GMAC0 181 > -#define CLK_MAC0_2TOP 182 > -#define CLK_MAC0_OUT 183 > -#define CLK_MAC0_REFOUT 184 > -#define CLK_GMAC0_PTP_REF 185 > -#define ACLK_USB 186 > -#define HCLK_USB 187 > -#define PCLK_USB 188 > -#define HCLK_USB2HOST0 189 > -#define HCLK_USB2HOST0_ARB 190 > -#define HCLK_USB2HOST1 191 > -#define HCLK_USB2HOST1_ARB 192 > -#define HCLK_SDMMC2 193 > -#define CLK_SDMMC2 194 > -#define ACLK_GMAC1 195 > -#define PCLK_GMAC1 196 > -#define CLK_MAC1_2TOP 197 > -#define CLK_MAC1_OUT 198 > -#define CLK_MAC1_REFOUT 199 > -#define CLK_GMAC1_PTP_REF 200 > -#define ACLK_PERIMID 201 > -#define HCLK_PERIMID 202 > -#define ACLK_VI 203 > -#define HCLK_VI 204 > -#define PCLK_VI 205 > -#define ACLK_VICAP 206 > -#define HCLK_VICAP 207 > -#define DCLK_VICAP 208 > -#define ICLK_VICAP_G 209 > -#define ACLK_ISP 210 > -#define HCLK_ISP 211 > -#define CLK_ISP 212 > -#define PCLK_CSI2HOST1 213 > -#define CLK_CIF_OUT 214 > -#define CLK_CAM0_OUT 215 > -#define CLK_CAM1_OUT 216 > -#define ACLK_VO 217 > -#define HCLK_VO 218 > -#define PCLK_VO 219 > -#define ACLK_VOP_PRE 220 > -#define ACLK_VOP 221 > -#define HCLK_VOP 222 > -#define DCLK_VOP0 223 > -#define DCLK_VOP1 224 > -#define DCLK_VOP2 225 > -#define CLK_VOP_PWM 226 > -#define ACLK_HDCP 227 > -#define HCLK_HDCP 228 > -#define PCLK_HDCP 229 > -#define PCLK_HDMI_HOST 230 > -#define CLK_HDMI_SFR 231 > -#define PCLK_DSITX_0 232 > -#define PCLK_DSITX_1 233 > -#define PCLK_EDP_CTRL 234 > -#define CLK_EDP_200M 235 > -#define ACLK_VPU_PRE 236 > -#define HCLK_VPU_PRE 237 > -#define ACLK_VPU 238 > -#define HCLK_VPU 239 > -#define ACLK_RGA_PRE 240 > -#define HCLK_RGA_PRE 241 > -#define PCLK_RGA_PRE 242 > -#define ACLK_RGA 243 > -#define HCLK_RGA 244 > -#define CLK_RGA_CORE 245 > -#define ACLK_IEP 246 > -#define HCLK_IEP 247 > -#define CLK_IEP_CORE 248 > -#define HCLK_EBC 249 > -#define DCLK_EBC 250 > -#define ACLK_JDEC 251 > -#define HCLK_JDEC 252 > -#define ACLK_JENC 253 > -#define HCLK_JENC 254 > -#define PCLK_EINK 255 > -#define HCLK_EINK 256 > -#define ACLK_RKVENC_PRE 257 > -#define HCLK_RKVENC_PRE 258 > -#define ACLK_RKVENC 259 > -#define HCLK_RKVENC 260 > -#define CLK_RKVENC_CORE 261 > -#define ACLK_RKVDEC_PRE 262 > -#define HCLK_RKVDEC_PRE 263 > -#define ACLK_RKVDEC 264 > -#define HCLK_RKVDEC 265 > -#define CLK_RKVDEC_CA 266 > -#define CLK_RKVDEC_CORE 267 > -#define CLK_RKVDEC_HEVC_CA 268 > -#define ACLK_BUS 269 > -#define PCLK_BUS 270 > -#define PCLK_TSADC 271 > -#define CLK_TSADC_TSEN 272 > -#define CLK_TSADC 273 > -#define PCLK_SARADC 274 > -#define CLK_SARADC 275 > -#define PCLK_SCR 276 > -#define PCLK_WDT_NS 277 > -#define TCLK_WDT_NS 278 > -#define ACLK_DMAC0 279 > -#define ACLK_DMAC1 280 > -#define ACLK_MCU 281 > -#define PCLK_INTMUX 282 > -#define PCLK_MAILBOX 283 > -#define PCLK_UART1 284 > -#define CLK_UART1_SRC 285 > -#define CLK_UART1_FRAC 286 > -#define SCLK_UART1 287 > -#define PCLK_UART2 288 > -#define CLK_UART2_SRC 289 > -#define CLK_UART2_FRAC 290 > -#define SCLK_UART2 291 > -#define PCLK_UART3 292 > -#define CLK_UART3_SRC 293 > -#define CLK_UART3_FRAC 294 > -#define SCLK_UART3 295 > -#define PCLK_UART4 296 > -#define CLK_UART4_SRC 297 > -#define CLK_UART4_FRAC 298 > -#define SCLK_UART4 299 > -#define PCLK_UART5 300 > -#define CLK_UART5_SRC 301 > -#define CLK_UART5_FRAC 302 > -#define SCLK_UART5 303 > -#define PCLK_UART6 304 > -#define CLK_UART6_SRC 305 > -#define CLK_UART6_FRAC 306 > -#define SCLK_UART6 307 > -#define PCLK_UART7 308 > -#define CLK_UART7_SRC 309 > -#define CLK_UART7_FRAC 310 > -#define SCLK_UART7 311 > -#define PCLK_UART8 312 > -#define CLK_UART8_SRC 313 > -#define CLK_UART8_FRAC 314 > -#define SCLK_UART8 315 > -#define PCLK_UART9 316 > -#define CLK_UART9_SRC 317 > -#define CLK_UART9_FRAC 318 > -#define SCLK_UART9 319 > -#define PCLK_CAN0 320 > -#define CLK_CAN0 321 > -#define PCLK_CAN1 322 > -#define CLK_CAN1 323 > -#define PCLK_CAN2 324 > -#define CLK_CAN2 325 > -#define CLK_I2C 326 > -#define PCLK_I2C1 327 > -#define CLK_I2C1 328 > -#define PCLK_I2C2 329 > -#define CLK_I2C2 330 > -#define PCLK_I2C3 331 > -#define CLK_I2C3 332 > -#define PCLK_I2C4 333 > -#define CLK_I2C4 334 > -#define PCLK_I2C5 335 > -#define CLK_I2C5 336 > -#define PCLK_SPI0 337 > -#define CLK_SPI0 338 > -#define PCLK_SPI1 339 > -#define CLK_SPI1 340 > -#define PCLK_SPI2 341 > -#define CLK_SPI2 342 > -#define PCLK_SPI3 343 > -#define CLK_SPI3 344 > -#define PCLK_PWM1 345 > -#define CLK_PWM1 346 > -#define CLK_PWM1_CAPTURE 347 > -#define PCLK_PWM2 348 > -#define CLK_PWM2 349 > -#define CLK_PWM2_CAPTURE 350 > -#define PCLK_PWM3 351 > -#define CLK_PWM3 352 > -#define CLK_PWM3_CAPTURE 353 > -#define DBCLK_GPIO 354 > -#define PCLK_GPIO1 355 > -#define DBCLK_GPIO1 356 > -#define PCLK_GPIO2 357 > -#define DBCLK_GPIO2 358 > -#define PCLK_GPIO3 359 > -#define DBCLK_GPIO3 360 > -#define PCLK_GPIO4 361 > -#define DBCLK_GPIO4 362 > -#define OCC_SCAN_CLK_GPIO 363 > -#define PCLK_TIMER 364 > -#define CLK_TIMER0 365 > -#define CLK_TIMER1 366 > -#define CLK_TIMER2 367 > -#define CLK_TIMER3 368 > -#define CLK_TIMER4 369 > -#define CLK_TIMER5 370 > -#define ACLK_TOP_HIGH 371 > -#define ACLK_TOP_LOW 372 > -#define HCLK_TOP 373 > -#define PCLK_TOP 374 > -#define PCLK_PCIE30PHY 375 > -#define CLK_OPTC_ARB 376 > -#define PCLK_MIPICSIPHY 377 > -#define PCLK_MIPIDSIPHY0 378 > -#define PCLK_MIPIDSIPHY1 379 > -#define PCLK_PIPEPHY0 380 > -#define PCLK_PIPEPHY1 381 > -#define PCLK_PIPEPHY2 382 > -#define PCLK_CPU_BOOST 383 > -#define CLK_CPU_BOOST 384 > -#define PCLK_OTPPHY 385 > -#define SCLK_GMAC0 386 > -#define SCLK_GMAC0_RGMII_SPEED 387 > -#define SCLK_GMAC0_RMII_SPEED 388 > -#define SCLK_GMAC0_RX_TX 389 > -#define SCLK_GMAC1 390 > -#define SCLK_GMAC1_RGMII_SPEED 391 > -#define SCLK_GMAC1_RMII_SPEED 392 > -#define SCLK_GMAC1_RX_TX 393 > -#define SCLK_SDMMC0_DRV 394 > -#define SCLK_SDMMC0_SAMPLE 395 > -#define SCLK_SDMMC1_DRV 396 > -#define SCLK_SDMMC1_SAMPLE 397 > -#define SCLK_SDMMC2_DRV 398 > -#define SCLK_SDMMC2_SAMPLE 399 > -#define SCLK_EMMC_DRV 400 > -#define SCLK_EMMC_SAMPLE 401 > -#define PCLK_EDPPHY_GRF 402 > -#define CLK_HDMI_CEC 403 > -#define CLK_I2S0_8CH_TX 404 > -#define CLK_I2S0_8CH_RX 405 > -#define CLK_I2S1_8CH_TX 406 > -#define CLK_I2S1_8CH_RX 407 > -#define CLK_I2S2_2CH 408 > -#define CLK_I2S3_2CH_TX 409 > -#define CLK_I2S3_2CH_RX 410 > -#define CPLL_500M 411 > -#define CPLL_250M 412 > -#define CPLL_125M 413 > -#define CPLL_62P5M 414 > -#define CPLL_50M 415 > -#define CPLL_25M 416 > -#define CPLL_100M 417 > -#define SCLK_DDRCLK 418 > - > -#define PCLK_CORE_PVTM 450 > - > -#define CLK_NR_CLKS (PCLK_CORE_PVTM + 1) > - > -/* pmu soft-reset indices */ > -/* pmucru_softrst_con0 */ > -#define SRST_P_PDPMU_NIU 0 > -#define SRST_P_PMUCRU 1 > -#define SRST_P_PMUGRF 2 > -#define SRST_P_I2C0 3 > -#define SRST_I2C0 4 > -#define SRST_P_UART0 5 > -#define SRST_S_UART0 6 > -#define SRST_P_PWM0 7 > -#define SRST_PWM0 8 > -#define SRST_P_GPIO0 9 > -#define SRST_GPIO0 10 > -#define SRST_P_PMUPVTM 11 > -#define SRST_PMUPVTM 12 > - > -/* soft-reset indices */ > - > -/* cru_softrst_con0 */ > -#define SRST_NCORERESET0 0 > -#define SRST_NCORERESET1 1 > -#define SRST_NCORERESET2 2 > -#define SRST_NCORERESET3 3 > -#define SRST_NCPUPORESET0 4 > -#define SRST_NCPUPORESET1 5 > -#define SRST_NCPUPORESET2 6 > -#define SRST_NCPUPORESET3 7 > -#define SRST_NSRESET 8 > -#define SRST_NSPORESET 9 > -#define SRST_NATRESET 10 > -#define SRST_NGICRESET 11 > -#define SRST_NPRESET 12 > -#define SRST_NPERIPHRESET 13 > - > -/* cru_softrst_con1 */ > -#define SRST_A_CORE_NIU2DDR 16 > -#define SRST_A_CORE_NIU2BUS 17 > -#define SRST_P_DBG_NIU 18 > -#define SRST_P_DBG 19 > -#define SRST_P_DBG_DAPLITE 20 > -#define SRST_DAP 21 > -#define SRST_A_ADB400_CORE2GIC 22 > -#define SRST_A_ADB400_GIC2CORE 23 > -#define SRST_P_CORE_GRF 24 > -#define SRST_P_CORE_PVTM 25 > -#define SRST_CORE_PVTM 26 > -#define SRST_CORE_PVTPLL 27 > - > -/* cru_softrst_con2 */ > -#define SRST_GPU 32 > -#define SRST_A_GPU_NIU 33 > -#define SRST_P_GPU_NIU 34 > -#define SRST_P_GPU_PVTM 35 > -#define SRST_GPU_PVTM 36 > -#define SRST_GPU_PVTPLL 37 > -#define SRST_A_NPU_NIU 40 > -#define SRST_H_NPU_NIU 41 > -#define SRST_P_NPU_NIU 42 > -#define SRST_A_NPU 43 > -#define SRST_H_NPU 44 > -#define SRST_P_NPU_PVTM 45 > -#define SRST_NPU_PVTM 46 > -#define SRST_NPU_PVTPLL 47 > - > -/* cru_softrst_con3 */ > -#define SRST_A_MSCH 51 > -#define SRST_HWFFC_CTRL 52 > -#define SRST_DDR_ALWAYSON 53 > -#define SRST_A_DDRSPLIT 54 > -#define SRST_DDRDFI_CTL 55 > -#define SRST_A_DMA2DDR 57 > - > -/* cru_softrst_con4 */ > -#define SRST_A_PERIMID_NIU 64 > -#define SRST_H_PERIMID_NIU 65 > -#define SRST_A_GIC_AUDIO_NIU 66 > -#define SRST_H_GIC_AUDIO_NIU 67 > -#define SRST_A_GIC600 68 > -#define SRST_A_GIC600_DEBUG 69 > -#define SRST_A_GICADB_CORE2GIC 70 > -#define SRST_A_GICADB_GIC2CORE 71 > -#define SRST_A_SPINLOCK 72 > -#define SRST_H_SDMMC_BUFFER 73 > -#define SRST_D_SDMMC_BUFFER 74 > -#define SRST_H_I2S0_8CH 75 > -#define SRST_H_I2S1_8CH 76 > -#define SRST_H_I2S2_2CH 77 > -#define SRST_H_I2S3_2CH 78 > - > -/* cru_softrst_con5 */ > -#define SRST_M_I2S0_8CH_TX 80 > -#define SRST_M_I2S0_8CH_RX 81 > -#define SRST_M_I2S1_8CH_TX 82 > -#define SRST_M_I2S1_8CH_RX 83 > -#define SRST_M_I2S2_2CH 84 > -#define SRST_M_I2S3_2CH_TX 85 > -#define SRST_M_I2S3_2CH_RX 86 > -#define SRST_H_PDM 87 > -#define SRST_M_PDM 88 > -#define SRST_H_VAD 89 > -#define SRST_H_SPDIF_8CH 90 > -#define SRST_M_SPDIF_8CH 91 > -#define SRST_H_AUDPWM 92 > -#define SRST_S_AUDPWM 93 > -#define SRST_H_ACDCDIG 94 > -#define SRST_ACDCDIG 95 > - > -/* cru_softrst_con6 */ > -#define SRST_A_SECURE_FLASH_NIU 96 > -#define SRST_H_SECURE_FLASH_NIU 97 > -#define SRST_A_CRYPTO_NS 103 > -#define SRST_H_CRYPTO_NS 104 > -#define SRST_CRYPTO_NS_CORE 105 > -#define SRST_CRYPTO_NS_PKA 106 > -#define SRST_CRYPTO_NS_RNG 107 > -#define SRST_H_TRNG_NS 108 > -#define SRST_TRNG_NS 109 > - > -/* cru_softrst_con7 */ > -#define SRST_H_NANDC 112 > -#define SRST_N_NANDC 113 > -#define SRST_H_SFC 114 > -#define SRST_H_SFC_XIP 115 > -#define SRST_S_SFC 116 > -#define SRST_A_EMMC 117 > -#define SRST_H_EMMC 118 > -#define SRST_B_EMMC 119 > -#define SRST_C_EMMC 120 > -#define SRST_T_EMMC 121 > - > -/* cru_softrst_con8 */ > -#define SRST_A_PIPE_NIU 128 > -#define SRST_P_PIPE_NIU 130 > -#define SRST_P_PIPE_GRF 133 > -#define SRST_A_SATA0 134 > -#define SRST_SATA0_PIPE 135 > -#define SRST_SATA0_PMALIVE 136 > -#define SRST_SATA0_RXOOB 137 > -#define SRST_A_SATA1 138 > -#define SRST_SATA1_PIPE 139 > -#define SRST_SATA1_PMALIVE 140 > -#define SRST_SATA1_RXOOB 141 > - > -/* cru_softrst_con9 */ > -#define SRST_A_SATA2 144 > -#define SRST_SATA2_PIPE 145 > -#define SRST_SATA2_PMALIVE 146 > -#define SRST_SATA2_RXOOB 147 > -#define SRST_USB3OTG0 148 > -#define SRST_USB3OTG1 149 > -#define SRST_XPCS 150 > -#define SRST_XPCS_TX_DIV10 151 > -#define SRST_XPCS_RX_DIV10 152 > -#define SRST_XPCS_XGXS_RX 153 > - > -/* cru_softrst_con10 */ > -#define SRST_P_PCIE20 160 > -#define SRST_PCIE20_POWERUP 161 > -#define SRST_MSTR_ARESET_PCIE20 162 > -#define SRST_SLV_ARESET_PCIE20 163 > -#define SRST_DBI_ARESET_PCIE20 164 > -#define SRST_BRESET_PCIE20 165 > -#define SRST_PERST_PCIE20 166 > -#define SRST_CORE_RST_PCIE20 167 > -#define SRST_NSTICKY_RST_PCIE20 168 > -#define SRST_STICKY_RST_PCIE20 169 > -#define SRST_PWR_RST_PCIE20 170 > - > -/* cru_softrst_con11 */ > -#define SRST_P_PCIE30X1 176 > -#define SRST_PCIE30X1_POWERUP 177 > -#define SRST_M_ARESET_PCIE30X1 178 > -#define SRST_S_ARESET_PCIE30X1 179 > -#define SRST_D_ARESET_PCIE30X1 180 > -#define SRST_BRESET_PCIE30X1 181 > -#define SRST_PERST_PCIE30X1 182 > -#define SRST_CORE_RST_PCIE30X1 183 > -#define SRST_NSTC_RST_PCIE30X1 184 > -#define SRST_STC_RST_PCIE30X1 185 > -#define SRST_PWR_RST_PCIE30X1 186 > - > -/* cru_softrst_con12 */ > -#define SRST_P_PCIE30X2 192 > -#define SRST_PCIE30X2_POWERUP 193 > -#define SRST_M_ARESET_PCIE30X2 194 > -#define SRST_S_ARESET_PCIE30X2 195 > -#define SRST_D_ARESET_PCIE30X2 196 > -#define SRST_BRESET_PCIE30X2 197 > -#define SRST_PERST_PCIE30X2 198 > -#define SRST_CORE_RST_PCIE30X2 199 > -#define SRST_NSTC_RST_PCIE30X2 200 > -#define SRST_STC_RST_PCIE30X2 201 > -#define SRST_PWR_RST_PCIE30X2 202 > - > -/* cru_softrst_con13 */ > -#define SRST_A_PHP_NIU 208 > -#define SRST_H_PHP_NIU 209 > -#define SRST_P_PHP_NIU 210 > -#define SRST_H_SDMMC0 211 > -#define SRST_SDMMC0 212 > -#define SRST_H_SDMMC1 213 > -#define SRST_SDMMC1 214 > -#define SRST_A_GMAC0 215 > -#define SRST_GMAC0_TIMESTAMP 216 > - > -/* cru_softrst_con14 */ > -#define SRST_A_USB_NIU 224 > -#define SRST_H_USB_NIU 225 > -#define SRST_P_USB_NIU 226 > -#define SRST_P_USB_GRF 227 > -#define SRST_H_USB2HOST0 228 > -#define SRST_H_USB2HOST0_ARB 229 > -#define SRST_USB2HOST0_UTMI 230 > -#define SRST_H_USB2HOST1 231 > -#define SRST_H_USB2HOST1_ARB 232 > -#define SRST_USB2HOST1_UTMI 233 > -#define SRST_H_SDMMC2 234 > -#define SRST_SDMMC2 235 > -#define SRST_A_GMAC1 236 > -#define SRST_GMAC1_TIMESTAMP 237 > - > -/* cru_softrst_con15 */ > -#define SRST_A_VI_NIU 240 > -#define SRST_H_VI_NIU 241 > -#define SRST_P_VI_NIU 242 > -#define SRST_A_VICAP 247 > -#define SRST_H_VICAP 248 > -#define SRST_D_VICAP 249 > -#define SRST_I_VICAP 250 > -#define SRST_P_VICAP 251 > -#define SRST_H_ISP 252 > -#define SRST_ISP 253 > -#define SRST_P_CSI2HOST1 255 > - > -/* cru_softrst_con16 */ > -#define SRST_A_VO_NIU 256 > -#define SRST_H_VO_NIU 257 > -#define SRST_P_VO_NIU 258 > -#define SRST_A_VOP_NIU 259 > -#define SRST_A_VOP 260 > -#define SRST_H_VOP 261 > -#define SRST_VOP0 262 > -#define SRST_VOP1 263 > -#define SRST_VOP2 264 > -#define SRST_VOP_PWM 265 > -#define SRST_A_HDCP 266 > -#define SRST_H_HDCP 267 > -#define SRST_P_HDCP 268 > -#define SRST_P_HDMI_HOST 270 > -#define SRST_HDMI_HOST 271 > - > -/* cru_softrst_con17 */ > -#define SRST_P_DSITX_0 272 > -#define SRST_P_DSITX_1 273 > -#define SRST_P_EDP_CTRL 274 > -#define SRST_EDP_24M 275 > -#define SRST_A_VPU_NIU 280 > -#define SRST_H_VPU_NIU 281 > -#define SRST_A_VPU 282 > -#define SRST_H_VPU 283 > -#define SRST_H_EINK 286 > -#define SRST_P_EINK 287 > - > -/* cru_softrst_con18 */ > -#define SRST_A_RGA_NIU 288 > -#define SRST_H_RGA_NIU 289 > -#define SRST_P_RGA_NIU 290 > -#define SRST_A_RGA 292 > -#define SRST_H_RGA 293 > -#define SRST_RGA_CORE 294 > -#define SRST_A_IEP 295 > -#define SRST_H_IEP 296 > -#define SRST_IEP_CORE 297 > -#define SRST_H_EBC 298 > -#define SRST_D_EBC 299 > -#define SRST_A_JDEC 300 > -#define SRST_H_JDEC 301 > -#define SRST_A_JENC 302 > -#define SRST_H_JENC 303 > - > -/* cru_softrst_con19 */ > -#define SRST_A_VENC_NIU 304 > -#define SRST_H_VENC_NIU 305 > -#define SRST_A_RKVENC 307 > -#define SRST_H_RKVENC 308 > -#define SRST_RKVENC_CORE 309 > - > -/* cru_softrst_con20 */ > -#define SRST_A_RKVDEC_NIU 320 > -#define SRST_H_RKVDEC_NIU 321 > -#define SRST_A_RKVDEC 322 > -#define SRST_H_RKVDEC 323 > -#define SRST_RKVDEC_CA 324 > -#define SRST_RKVDEC_CORE 325 > -#define SRST_RKVDEC_HEVC_CA 326 > - > -/* cru_softrst_con21 */ > -#define SRST_A_BUS_NIU 336 > -#define SRST_P_BUS_NIU 338 > -#define SRST_P_CAN0 340 > -#define SRST_CAN0 341 > -#define SRST_P_CAN1 342 > -#define SRST_CAN1 343 > -#define SRST_P_CAN2 344 > -#define SRST_CAN2 345 > -#define SRST_P_GPIO1 346 > -#define SRST_GPIO1 347 > -#define SRST_P_GPIO2 348 > -#define SRST_GPIO2 349 > -#define SRST_P_GPIO3 350 > -#define SRST_GPIO3 351 > - > -/* cru_softrst_con22 */ > -#define SRST_P_GPIO4 352 > -#define SRST_GPIO4 353 > -#define SRST_P_I2C1 354 > -#define SRST_I2C1 355 > -#define SRST_P_I2C2 356 > -#define SRST_I2C2 357 > -#define SRST_P_I2C3 358 > -#define SRST_I2C3 359 > -#define SRST_P_I2C4 360 > -#define SRST_I2C4 361 > -#define SRST_P_I2C5 362 > -#define SRST_I2C5 363 > -#define SRST_P_OTPC_NS 364 > -#define SRST_OTPC_NS_SBPI 365 > -#define SRST_OTPC_NS_USR 366 > - > -/* cru_softrst_con23 */ > -#define SRST_P_PWM1 368 > -#define SRST_PWM1 369 > -#define SRST_P_PWM2 370 > -#define SRST_PWM2 371 > -#define SRST_P_PWM3 372 > -#define SRST_PWM3 373 > -#define SRST_P_SPI0 374 > -#define SRST_SPI0 375 > -#define SRST_P_SPI1 376 > -#define SRST_SPI1 377 > -#define SRST_P_SPI2 378 > -#define SRST_SPI2 379 > -#define SRST_P_SPI3 380 > -#define SRST_SPI3 381 > - > -/* cru_softrst_con24 */ > -#define SRST_P_SARADC 384 > -#define SRST_P_TSADC 385 > -#define SRST_TSADC 386 > -#define SRST_P_TIMER 387 > -#define SRST_TIMER0 388 > -#define SRST_TIMER1 389 > -#define SRST_TIMER2 390 > -#define SRST_TIMER3 391 > -#define SRST_TIMER4 392 > -#define SRST_TIMER5 393 > -#define SRST_P_UART1 394 > -#define SRST_S_UART1 395 > - > -/* cru_softrst_con25 */ > -#define SRST_P_UART2 400 > -#define SRST_S_UART2 401 > -#define SRST_P_UART3 402 > -#define SRST_S_UART3 403 > -#define SRST_P_UART4 404 > -#define SRST_S_UART4 405 > -#define SRST_P_UART5 406 > -#define SRST_S_UART5 407 > -#define SRST_P_UART6 408 > -#define SRST_S_UART6 409 > -#define SRST_P_UART7 410 > -#define SRST_S_UART7 411 > -#define SRST_P_UART8 412 > -#define SRST_S_UART8 413 > -#define SRST_P_UART9 414 > -#define SRST_S_UART9 415 > - > -/* cru_softrst_con26 */ > -#define SRST_P_GRF 416 > -#define SRST_P_GRF_VCCIO12 417 > -#define SRST_P_GRF_VCCIO34 418 > -#define SRST_P_GRF_VCCIO567 419 > -#define SRST_P_SCR 420 > -#define SRST_P_WDT_NS 421 > -#define SRST_T_WDT_NS 422 > -#define SRST_P_DFT2APB 423 > -#define SRST_A_MCU 426 > -#define SRST_P_INTMUX 427 > -#define SRST_P_MAILBOX 428 > - > -/* cru_softrst_con27 */ > -#define SRST_A_TOP_HIGH_NIU 432 > -#define SRST_A_TOP_LOW_NIU 433 > -#define SRST_H_TOP_NIU 434 > -#define SRST_P_TOP_NIU 435 > -#define SRST_P_TOP_CRU 438 > -#define SRST_P_DDRPHY 439 > -#define SRST_DDRPHY 440 > -#define SRST_P_MIPICSIPHY 442 > -#define SRST_P_MIPIDSIPHY0 443 > -#define SRST_P_MIPIDSIPHY1 444 > -#define SRST_P_PCIE30PHY 445 > -#define SRST_PCIE30PHY 446 > -#define SRST_P_PCIE30PHY_GRF 447 > - > -/* cru_softrst_con28 */ > -#define SRST_P_APB2ASB_LEFT 448 > -#define SRST_P_APB2ASB_BOTTOM 449 > -#define SRST_P_ASB2APB_LEFT 450 > -#define SRST_P_ASB2APB_BOTTOM 451 > -#define SRST_P_PIPEPHY0 452 > -#define SRST_PIPEPHY0 453 > -#define SRST_P_PIPEPHY1 454 > -#define SRST_PIPEPHY1 455 > -#define SRST_P_PIPEPHY2 456 > -#define SRST_PIPEPHY2 457 > -#define SRST_P_USB2PHY0_GRF 458 > -#define SRST_P_USB2PHY1_GRF 459 > -#define SRST_P_CPU_BOOST 460 > -#define SRST_CPU_BOOST 461 > -#define SRST_P_OTPPHY 462 > -#define SRST_OTPPHY 463 > - > -/* cru_softrst_con29 */ > -#define SRST_USB2PHY0_POR 464 > -#define SRST_USB2PHY0_USB3OTG0 465 > -#define SRST_USB2PHY0_USB3OTG1 466 > -#define SRST_USB2PHY1_POR 467 > -#define SRST_USB2PHY1_USB2HOST0 468 > -#define SRST_USB2PHY1_USB2HOST1 469 > -#define SRST_P_EDPPHY_GRF 470 > -#define SRST_TSADCPHY 471 > -#define SRST_GMAC0_DELAYLINE 472 > -#define SRST_GMAC1_DELAYLINE 473 > -#define SRST_OTPC_ARB 474 > -#define SRST_P_PIPEPHY0_GRF 475 > -#define SRST_P_PIPEPHY1_GRF 476 > -#define SRST_P_PIPEPHY2_GRF 477 > - > -#endif > diff --git a/include/dt-bindings/power/rk3568-power.h b/include/dt-bindings/power/rk3568-power.h > deleted file mode 100644 > index 6cc1af1a9d26..000000000000 > --- a/include/dt-bindings/power/rk3568-power.h > +++ /dev/null > @@ -1,32 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0 */ > -#ifndef __DT_BINDINGS_POWER_RK3568_POWER_H__ > -#define __DT_BINDINGS_POWER_RK3568_POWER_H__ > - > -/* VD_CORE */ > -#define RK3568_PD_CPU_0 0 > -#define RK3568_PD_CPU_1 1 > -#define RK3568_PD_CPU_2 2 > -#define RK3568_PD_CPU_3 3 > -#define RK3568_PD_CORE_ALIVE 4 > - > -/* VD_PMU */ > -#define RK3568_PD_PMU 5 > - > -/* VD_NPU */ > -#define RK3568_PD_NPU 6 > - > -/* VD_GPU */ > -#define RK3568_PD_GPU 7 > - > -/* VD_LOGIC */ > -#define RK3568_PD_VI 8 > -#define RK3568_PD_VO 9 > -#define RK3568_PD_RGA 10 > -#define RK3568_PD_VPU 11 > -#define RK3568_PD_CENTER 12 > -#define RK3568_PD_RKVDEC 13 > -#define RK3568_PD_RKVENC 14 > -#define RK3568_PD_PIPE 15 > -#define RK3568_PD_LOGIC_ALIVE 16 > - > -#endif > -- > 2.43.2 >
Hi Chris, On 2024-05-04 22:51, Chris Morgan wrote: > On Sat, May 04, 2024 at 07:43:01PM +0000, Jonas Karlman wrote: >> Remove redundant device tree files now that RK356x boards have been >> migrated to use OF_UPSTREAM. >> >> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> >> --- >> arch/arm/dts/rk3566-anbernic-rgxx3.dtsi | 788 ------ >> arch/arm/dts/rk3566-quartz64-a.dts | 838 ------ >> arch/arm/dts/rk3566-quartz64-b.dts | 737 ----- >> arch/arm/dts/rk3566-radxa-cm3-io.dts | 281 -- >> arch/arm/dts/rk3566-radxa-cm3.dtsi | 425 --- >> arch/arm/dts/rk3566-soquartz-blade.dts | 198 -- >> arch/arm/dts/rk3566-soquartz-cm4.dts | 196 -- >> arch/arm/dts/rk3566-soquartz-model-a.dts | 236 -- >> arch/arm/dts/rk3566-soquartz.dtsi | 684 ----- >> arch/arm/dts/rk3566.dtsi | 35 - >> arch/arm/dts/rk3568-bpi-r2-pro.dts | 852 ------ >> arch/arm/dts/rk3568-evb.dts | 689 ----- >> arch/arm/dts/rk3568-lubancat-2.dts | 730 ----- >> arch/arm/dts/rk3568-nanopi-r5c.dts | 112 - >> arch/arm/dts/rk3568-nanopi-r5s.dts | 136 - >> arch/arm/dts/rk3568-nanopi-r5s.dtsi | 587 ---- >> arch/arm/dts/rk3568-odroid-m1.dts | 741 ----- >> arch/arm/dts/rk3568-pinctrl.dtsi | 3214 ---------------------- >> arch/arm/dts/rk3568-radxa-cm3i.dtsi | 412 --- >> arch/arm/dts/rk3568-radxa-e25.dts | 236 -- >> arch/arm/dts/rk3568-rock-3a.dts | 859 ------ >> arch/arm/dts/rk3568.dtsi | 267 -- >> arch/arm/dts/rk356x.dtsi | 1886 ------------- >> include/dt-bindings/clock/rk3568-cru.h | 926 ------- >> include/dt-bindings/power/rk3568-power.h | 32 - >> 25 files changed, 16097 deletions(-) >> delete mode 100644 arch/arm/dts/rk3566-anbernic-rgxx3.dtsi >> delete mode 100644 arch/arm/dts/rk3566-quartz64-a.dts >> delete mode 100644 arch/arm/dts/rk3566-quartz64-b.dts >> delete mode 100644 arch/arm/dts/rk3566-radxa-cm3-io.dts >> delete mode 100644 arch/arm/dts/rk3566-radxa-cm3.dtsi >> delete mode 100644 arch/arm/dts/rk3566-soquartz-blade.dts >> delete mode 100644 arch/arm/dts/rk3566-soquartz-cm4.dts >> delete mode 100644 arch/arm/dts/rk3566-soquartz-model-a.dts >> delete mode 100644 arch/arm/dts/rk3566-soquartz.dtsi >> delete mode 100644 arch/arm/dts/rk3566.dtsi >> delete mode 100644 arch/arm/dts/rk3568-bpi-r2-pro.dts >> delete mode 100644 arch/arm/dts/rk3568-evb.dts >> delete mode 100644 arch/arm/dts/rk3568-lubancat-2.dts >> delete mode 100644 arch/arm/dts/rk3568-nanopi-r5c.dts >> delete mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dts >> delete mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dtsi >> delete mode 100644 arch/arm/dts/rk3568-odroid-m1.dts >> delete mode 100644 arch/arm/dts/rk3568-pinctrl.dtsi >> delete mode 100644 arch/arm/dts/rk3568-radxa-cm3i.dtsi >> delete mode 100644 arch/arm/dts/rk3568-radxa-e25.dts >> delete mode 100644 arch/arm/dts/rk3568-rock-3a.dts >> delete mode 100644 arch/arm/dts/rk3568.dtsi >> delete mode 100644 arch/arm/dts/rk356x.dtsi >> delete mode 100644 include/dt-bindings/clock/rk3568-cru.h >> delete mode 100644 include/dt-bindings/power/rk3568-power.h >> >> diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi b/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi >> deleted file mode 100644 > > Can we remove this since a non-upstream device tree depends on it? I was a bit unsure what to do about this file, after this patch it gets included from dts/upstream/ correctly when building the anbernic-rgxx3-rk3566 target. Not sure if it is better to keep a local copy in arch/arm/dts/ and manually sync it, or let it be included from dts/upstream/. Let me know if you want me to keep the copy in arch/arm/dts/. Regards, Jonas > > Thank you, > Chris > [snip]
On 2024/5/5 03:43, Jonas Karlman wrote: > Remove redundant device tree files now that RK356x boards have been > migrated to use OF_UPSTREAM. > > Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > arch/arm/dts/rk3566-anbernic-rgxx3.dtsi | 788 ------ > arch/arm/dts/rk3566-quartz64-a.dts | 838 ------ > arch/arm/dts/rk3566-quartz64-b.dts | 737 ----- > arch/arm/dts/rk3566-radxa-cm3-io.dts | 281 -- > arch/arm/dts/rk3566-radxa-cm3.dtsi | 425 --- > arch/arm/dts/rk3566-soquartz-blade.dts | 198 -- > arch/arm/dts/rk3566-soquartz-cm4.dts | 196 -- > arch/arm/dts/rk3566-soquartz-model-a.dts | 236 -- > arch/arm/dts/rk3566-soquartz.dtsi | 684 ----- > arch/arm/dts/rk3566.dtsi | 35 - > arch/arm/dts/rk3568-bpi-r2-pro.dts | 852 ------ > arch/arm/dts/rk3568-evb.dts | 689 ----- > arch/arm/dts/rk3568-lubancat-2.dts | 730 ----- > arch/arm/dts/rk3568-nanopi-r5c.dts | 112 - > arch/arm/dts/rk3568-nanopi-r5s.dts | 136 - > arch/arm/dts/rk3568-nanopi-r5s.dtsi | 587 ---- > arch/arm/dts/rk3568-odroid-m1.dts | 741 ----- > arch/arm/dts/rk3568-pinctrl.dtsi | 3214 ---------------------- > arch/arm/dts/rk3568-radxa-cm3i.dtsi | 412 --- > arch/arm/dts/rk3568-radxa-e25.dts | 236 -- > arch/arm/dts/rk3568-rock-3a.dts | 859 ------ > arch/arm/dts/rk3568.dtsi | 267 -- > arch/arm/dts/rk356x.dtsi | 1886 ------------- > include/dt-bindings/clock/rk3568-cru.h | 926 ------- > include/dt-bindings/power/rk3568-power.h | 32 - > 25 files changed, 16097 deletions(-) > delete mode 100644 arch/arm/dts/rk3566-anbernic-rgxx3.dtsi > delete mode 100644 arch/arm/dts/rk3566-quartz64-a.dts > delete mode 100644 arch/arm/dts/rk3566-quartz64-b.dts > delete mode 100644 arch/arm/dts/rk3566-radxa-cm3-io.dts > delete mode 100644 arch/arm/dts/rk3566-radxa-cm3.dtsi > delete mode 100644 arch/arm/dts/rk3566-soquartz-blade.dts > delete mode 100644 arch/arm/dts/rk3566-soquartz-cm4.dts > delete mode 100644 arch/arm/dts/rk3566-soquartz-model-a.dts > delete mode 100644 arch/arm/dts/rk3566-soquartz.dtsi > delete mode 100644 arch/arm/dts/rk3566.dtsi > delete mode 100644 arch/arm/dts/rk3568-bpi-r2-pro.dts > delete mode 100644 arch/arm/dts/rk3568-evb.dts > delete mode 100644 arch/arm/dts/rk3568-lubancat-2.dts > delete mode 100644 arch/arm/dts/rk3568-nanopi-r5c.dts > delete mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dts > delete mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dtsi > delete mode 100644 arch/arm/dts/rk3568-odroid-m1.dts > delete mode 100644 arch/arm/dts/rk3568-pinctrl.dtsi > delete mode 100644 arch/arm/dts/rk3568-radxa-cm3i.dtsi > delete mode 100644 arch/arm/dts/rk3568-radxa-e25.dts > delete mode 100644 arch/arm/dts/rk3568-rock-3a.dts > delete mode 100644 arch/arm/dts/rk3568.dtsi > delete mode 100644 arch/arm/dts/rk356x.dtsi > delete mode 100644 include/dt-bindings/clock/rk3568-cru.h > delete mode 100644 include/dt-bindings/power/rk3568-power.h > > diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi b/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi > deleted file mode 100644 > index 8cbf3d9a4f22..000000000000 > --- a/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi > +++ /dev/null > @@ -1,788 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/input/linux-event-codes.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3566.dtsi" > - > -/ { > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - adc-joystick { > - compatible = "adc-joystick"; > - io-channels = <&adc_mux 0>, > - <&adc_mux 1>, > - <&adc_mux 2>, > - <&adc_mux 3>; > - pinctrl-0 = <&joy_mux_en>; > - pinctrl-names = "default"; > - poll-interval = <60>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - axis@0 { > - reg = <0>; > - abs-flat = <32>; > - abs-fuzz = <32>; > - abs-range = <1023 15>; > - linux,code = <ABS_X>; > - }; > - > - axis@1 { > - reg = <1>; > - abs-flat = <32>; > - abs-fuzz = <32>; > - abs-range = <15 1023>; > - linux,code = <ABS_RX>; > - }; > - > - axis@2 { > - reg = <2>; > - abs-flat = <32>; > - abs-fuzz = <32>; > - abs-range = <15 1023>; > - linux,code = <ABS_Y>; > - }; > - > - axis@3 { > - reg = <3>; > - abs-flat = <32>; > - abs-fuzz = <32>; > - abs-range = <1023 15>; > - linux,code = <ABS_RY>; > - }; > - }; > - > - adc_keys: adc-keys { > - compatible = "adc-keys"; > - io-channels = <&saradc 0>; > - io-channel-names = "buttons"; > - keyup-threshold-microvolt = <1800000>; > - poll-interval = <60>; > - > - /* > - * Button is mapped to F key in BSP kernel, but > - * according to input guidelines it should be mode. > - */ > - button-mode { > - label = "MODE"; > - linux,code = <BTN_MODE>; > - press-threshold-microvolt = <1750>; > - }; > - }; > - > - adc_mux: adc-mux { > - compatible = "io-channel-mux"; > - channels = "left_x", "right_x", "left_y", "right_y"; > - #io-channel-cells = <1>; > - io-channels = <&saradc 3>; > - io-channel-names = "parent"; > - mux-controls = <&gpio_mux>; > - settle-time-us = <100>; > - }; > - > - gpio_keys_control: gpio-keys-control { > - compatible = "gpio-keys"; > - pinctrl-0 = <&btn_pins_ctrl>; > - pinctrl-names = "default"; > - > - button-b { > - gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>; > - label = "SOUTH"; > - linux,code = <BTN_SOUTH>; > - }; > - > - button-down { > - gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; > - label = "DPAD-DOWN"; > - linux,code = <BTN_DPAD_DOWN>; > - }; > - > - button-l1 { > - gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; > - label = "TL"; > - linux,code = <BTN_TL>; > - }; > - > - button-l2 { > - gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; > - label = "TL2"; > - linux,code = <BTN_TL2>; > - }; > - > - button-select { > - gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; > - label = "SELECT"; > - linux,code = <BTN_SELECT>; > - }; > - > - button-start { > - gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>; > - label = "START"; > - linux,code = <BTN_START>; > - }; > - > - button-thumbl { > - gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; > - label = "THUMBL"; > - linux,code = <BTN_THUMBL>; > - }; > - > - button-thumbr { > - gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; > - label = "THUMBR"; > - linux,code = <BTN_THUMBR>; > - }; > - > - button-up { > - gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; > - label = "DPAD-UP"; > - linux,code = <BTN_DPAD_UP>; > - }; > - > - button-x { > - gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; > - label = "NORTH"; > - linux,code = <BTN_NORTH>; > - }; > - }; > - > - gpio_keys_vol: gpio-keys-vol { > - compatible = "gpio-keys"; > - autorepeat; > - pinctrl-0 = <&btn_pins_vol>; > - pinctrl-names = "default"; > - > - button-vol-down { > - gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; > - label = "VOLUMEDOWN"; > - linux,code = <KEY_VOLUMEDOWN>; > - }; > - > - button-vol-up { > - gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; > - label = "VOLUMEUP"; > - linux,code = <KEY_VOLUMEUP>; > - }; > - }; > - > - gpio_mux: mux-controller { > - compatible = "gpio-mux"; > - mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>, > - <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; > - #mux-control-cells = <0>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - ddc-i2c-bus = <&i2c5>; > - type = "c"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - leds: pwm-leds { > - compatible = "pwm-leds"; > - > - green_led: led-0 { > - color = <LED_COLOR_ID_GREEN>; > - default-state = "on"; > - function = LED_FUNCTION_POWER; > - max-brightness = <255>; > - pwms = <&pwm6 0 25000 0>; > - }; > - > - amber_led: led-1 { > - color = <LED_COLOR_ID_AMBER>; > - function = LED_FUNCTION_CHARGING; > - max-brightness = <255>; > - pwms = <&pwm7 0 25000 0>; > - }; > - > - red_led: led-2 { > - color = <LED_COLOR_ID_RED>; > - default-state = "off"; > - function = LED_FUNCTION_STATUS; > - max-brightness = <255>; > - pwms = <&pwm0 0 25000 0>; > - }; > - }; > - > - sdio_pwrseq: sdio-pwrseq { > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk817 1>; > - clock-names = "ext_clock"; > - pinctrl-0 = <&wifi_enable_h>; > - pinctrl-names = "default"; > - post-power-on-delay-ms = <200>; > - reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; > - }; > - > - vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 { > - compatible = "regulator-fixed"; > - gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; > - enable-active-high; > - pinctrl-0 = <&vcc_lcd_h>; > - pinctrl-names = "default"; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vcc3v3_lcd0_n"; > - vin-supply = <&vcc_3v3>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_sys: regulator-vcc-sys { > - compatible = "regulator-fixed"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3800000>; > - regulator-max-microvolt = <3800000>; > - regulator-name = "vcc_sys"; > - }; > - > - vcc_wifi: regulator-vcc-wifi { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; > - pinctrl-0 = <&vcc_wifi_h>; > - pinctrl-names = "default"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vcc_wifi"; > - }; > - > - vibrator: pwm-vibrator { > - compatible = "pwm-vibrator"; > - pwm-names = "enable"; > - pwms = <&pwm5 0 1000000000 0>; > - }; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - ddc-i2c-bus = <&i2c5>; > - pinctrl-0 = <&hdmitxm0_cec>; > - pinctrl-names = "default"; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - rk817: pmic@20 { > - compatible = "rockchip,rk817"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - clock-output-names = "rk808-clkout1", "rk808-clkout2"; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - #clock-cells = <1>; > - #sound-dai-cells = <0>; > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>; > - wakeup-source; > - > - vcc1-supply = <&vcc_sys>; > - vcc2-supply = <&vcc_sys>; > - vcc3-supply = <&vcc_sys>; > - vcc4-supply = <&vcc_sys>; > - vcc5-supply = <&vcc_sys>; > - vcc6-supply = <&vcc_sys>; > - vcc7-supply = <&vcc_sys>; > - vcc8-supply = <&vcc_sys>; > - vcc9-supply = <&dcdc_boost>; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vdd_logic"; > - regulator-state-mem { > - regulator-off-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vdd_gpu"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-name = "vcc_ddr"; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vcc_3v3: DCDC_REG4 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vcc_3v3"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG1 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcca1v8_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda_0v9"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda0v9_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vccio_acodec"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vccio_sd"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vcc3v3_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcc_1v8: LDO_REG7 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcc_1v8"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc1v8_dvp: LDO_REG8 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vcc1v8_dvp"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc2v8_dvp: LDO_REG9 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - regulator-name = "vcc2v8_dvp"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - dcdc_boost: BOOST { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <4700000>; > - regulator-max-microvolt = <5400000>; > - regulator-name = "boost"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - otg_switch: OTG_SWITCH { > - regulator-name = "otg_switch"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > - > - vdd_cpu: regulator@40 { > - compatible = "fcs,fan53555"; > - reg = <0x40>; > - fcs,suspend-voltage-selector = <1>; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <712500>; > - regulator-max-microvolt = <1390000>; > - regulator-name = "vdd_cpu"; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc_sys>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > -}; > - > -&i2c1 { > - /* Unknown/unused device at 0x3c */ > - status = "disabled"; > -}; > - > -&i2c5 { > - pinctrl-0 = <&i2c5m1_xfer>; > - pinctrl-names = "default"; > - status = "okay"; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&i2s1_8ch { > - pinctrl-0 = <&i2s1m0_sclktx > - &i2s1m0_lrcktx > - &i2s1m0_sdi0 > - &i2s1m0_sdo0>; > - pinctrl-names = "default"; > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&pinctrl { > - gpio-btns { > - btn_pins_ctrl: btn-pins-ctrl { > - rockchip,pins = > - <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - > - btn_pins_vol: btn-pins-vol { > - rockchip,pins = > - <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, > - <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - joy-mux { > - joy_mux_en: joy-mux-en { > - rockchip,pins = > - <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = > - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - sdio-pwrseq { > - wifi_enable_h: wifi-enable-h { > - rockchip,pins = > - <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - vcc3v3-lcd { > - vcc_lcd_h: vcc-lcd-h { > - rockchip,pins = > - <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - vcc-wifi { > - vcc_wifi_h: vcc-wifi-h { > - rockchip,pins = > - <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - status = "okay"; > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc1v8_dvp>; > - vccio7-supply = <&vcc_3v3>; > -}; > - > -&pwm0 { > - pinctrl-0 = <&pwm0m1_pins>; > - pinctrl-names = "default"; > - status = "okay"; > -}; > - > -&pwm5 { > - status = "okay"; > -}; > - > -&pwm6 { > - status = "okay"; > -}; > - > -&pwm7 { > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - pinctrl-names = "default"; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&sdmmc1 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>; > - pinctrl-names = "default"; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc1v8_dvp>; > - status = "okay"; > -}; > - > -&sdmmc2 { > - bus-width = <4>; > - cap-sd-highspeed; > - cap-sdio-irq; > - keep-power-in-suspend; > - mmc-pwrseq = <&sdio_pwrseq>; > - non-removable; > - pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; > - pinctrl-names = "default"; > - vmmc-supply = <&vcc_wifi>; > - vqmmc-supply = <&vcca1v8_pmu>; > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart1 { > - pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>; > - pinctrl-names = "default"; > - uart-has-rtscts; > - status = "okay"; > - > - bluetooth { > - compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; > - device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; > - enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; > - host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; > - }; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -/* > - * Lack the schematics to verify, but port works as a peripheral > - * (and not a host or OTG port). > - */ > -&usb_host0_xhci { > - dr_mode = "peripheral"; > - phys = <&usb2phy0_otg>; > - phy-names = "usb2-phy"; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - phy-names = "usb2-phy", "usb3-phy"; > - phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>; > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3566-quartz64-a.dts b/arch/arm/dts/rk3566-quartz64-a.dts > deleted file mode 100644 > index 59843a7a199c..000000000000 > --- a/arch/arm/dts/rk3566-quartz64-a.dts > +++ /dev/null > @@ -1,838 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3566.dtsi" > - > -/ { > - model = "Pine64 RK3566 Quartz64-A Board"; > - compatible = "pine64,quartz64-a", "rockchip,rk3566"; > - > - aliases { > - ethernet0 = &gmac1; > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - gmac1_clkin: external-gmac1-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "gmac1_clkin"; > - #clock-cells = <0>; > - }; > - > - fan: gpio_fan { > - compatible = "gpio-fan"; > - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; > - gpio-fan,speed-map = > - < 0 0>, > - <4500 1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&fan_en_h>; > - #cooling-cells = <2>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led-work { > - label = "work-led"; > - default-state = "off"; > - gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&work_led_enable_h>; > - retain-state-suspended; > - }; > - > - led-diy { > - label = "diy-led"; > - default-state = "on"; > - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&diy_led_enable_h>; > - retain-state-suspended; > - }; > - }; > - > - rk817-sound { > - compatible = "simple-audio-card"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,name = "Analog RK817"; > - simple-audio-card,mclk-fs = <256>; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s1_8ch>; > - }; > - > - simple-audio-card,codec { > - sound-dai = <&rk817>; > - }; > - }; > - > - sdio_pwrseq: sdio-pwrseq { > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk817 1>; > - clock-names = "ext_clock"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_enable_h>; > - post-power-on-delay-ms = <100>; > - power-off-delay-us = <5000000>; > - reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; > - }; > - > - spdif_dit: spdif-dit { > - compatible = "linux,spdif-dit"; > - #sound-dai-cells = <0>; > - }; > - > - spdif_sound: spdif-sound { > - compatible = "simple-audio-card"; > - simple-audio-card,name = "SPDIF"; > - > - simple-audio-card,cpu { > - sound-dai = <&spdif>; > - }; > - > - simple-audio-card,codec { > - sound-dai = <&spdif_dit>; > - }; > - }; > - > - vcc12v_dcin: vcc12v_dcin { > - compatible = "regulator-fixed"; > - regulator-name = "vcc12v_dcin"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - /* vbus feeds the rk817 usb input. > - * With no battery attached, also feeds vcc_bat+ > - * via ON/OFF_BAT jumper > - */ > - vbus: vbus { > - compatible = "regulator-fixed"; > - regulator-name = "vbus"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_enable_h>; > - regulator-name = "vcc3v3_pcie_p"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc_3v3>; > - }; > - > - vcc5v0_usb: vcc5v0_usb { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - /* all four ports are controlled by one gpio > - * the host ports are sourced from vcc5v0_usb > - * the otg port is sourced from vcc5v0_midu > - */ > - vcc5v0_usb20_host: vcc5v0_usb20_host { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb20_host_en>; > - regulator-name = "vcc5v0_usb20_host"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb20_otg: vcc5v0_usb20_otg { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; > - regulator-name = "vcc5v0_usb20_otg"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dcdc_boost>; > - }; > - > - vcc3v3_sd: vcc3v3_sd { > - compatible = "regulator-fixed"; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc_sd_h>; > - regulator-boot-on; > - regulator-name = "vcc3v3_sd"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc_3v3>; > - }; > - > - /* sourced from vbus and vcc_bat+ via rk817 sw5 */ > - vcc_sys: vcc_sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <4400000>; > - regulator-max-microvolt = <4400000>; > - vin-supply = <&vbus>; > - }; > - > - /* sourced from vcc_sys, sdio module operates internally at 3.3v */ > - vcc_wl: vcc_wl { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_wl"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc_sys>; > - }; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&combphy2 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu_thermal { > - trips { > - cpu_hot: cpu_hot { > - temperature = <55000>; > - hysteresis = <2000>; > - type = "active"; > - }; > - }; > - > - cooling-maps { > - map1 { > - trip = <&cpu_hot>; > - cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; > - clock_in_out = "input"; > - phy-supply = <&vcc_3v3>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m0_miim > - &gmac1m0_tx_bus2 > - &gmac1m0_rx_bus2 > - &gmac1m0_rgmii_clk > - &gmac1m0_clkinout > - &gmac1m0_rgmii_bus>; > - snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - tx_delay = <0x30>; > - rx_delay = <0x10>; > - phy-handle = <&rgmii_phy1>; > - status = "okay"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda_0v9>; > - avdd-1v8-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk817: pmic@20 { > - compatible = "rockchip,rk817"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - clock-output-names = "rk808-clkout1", "rk808-clkout2"; > - #clock-cells = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; > - rockchip,system-power-controller; > - #sound-dai-cells = <0>; > - wakeup-source; > - > - vcc1-supply = <&vcc_sys>; > - vcc2-supply = <&vcc_sys>; > - vcc3-supply = <&vcc_sys>; > - vcc4-supply = <&vcc_sys>; > - vcc5-supply = <&vcc_sys>; > - vcc6-supply = <&vcc_sys>; > - vcc7-supply = <&vcc_sys>; > - vcc8-supply = <&vcc_sys>; > - vcc9-supply = <&dcdc_boost>; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vdd_logic"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vdd_gpu"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-name = "vcc_ddr"; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vcc_3v3: DCDC_REG4 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vcc_3v3"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG1 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcca1v8_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda_0v9"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda0v9_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vccio_acodec"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vccio_sd"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vcc3v3_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcc_1v8: LDO_REG7 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcc_1v8"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc1v8_dvp: LDO_REG8 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcc1v8_dvp"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc2v8_dvp: LDO_REG9 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - regulator-name = "vcc2v8_dvp"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - dcdc_boost: BOOST { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - regulator-name = "boost"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - otg_switch: OTG_SWITCH { > - regulator-name = "otg_switch"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > -}; > - > -/* i2c3 is exposed on con40 > - * pin 3 - i2c3_sda_m0, pullup to vcc_3v3 > - * pin 5 - i2c3_scl_m0, pullup to vcc_3v3 > - */ > -&i2c3 { > - status = "okay"; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&i2s1_8ch { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s1m0_sclktx > - &i2s1m0_lrcktx > - &i2s1m0_sdi0 > - &i2s1m0_sdo0>; > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0>; > - }; > -}; > - > -&pcie2x1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_reset_h>; > - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie_p>; > - status = "okay"; > -}; > - > -&pinctrl { > - bt { > - bt_enable_h: bt-enable-h { > - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - bt_host_wake_l: bt-host-wake-l { > - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - > - bt_wake_l: bt-wake-l { > - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - fan { > - fan_en_h: fan-en-h { > - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - leds { > - work_led_enable_h: work-led-enable-h { > - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - diy_led_enable_h: diy-led-enable-h { > - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie_enable_h: pcie-enable-h { > - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie_reset_h: pcie-reset-h { > - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - usb2 { > - vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { > - rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - sdio-pwrseq { > - wifi_enable_h: wifi-enable-h { > - rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - vcc_sd { > - vcc_sd_h: vcc-sd-h { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc1v8_dvp>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - mmc-hs200-1_8v; > - non-removable; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&sdmmc1 { > - bus-width = <4>; > - cap-sd-highspeed; > - cap-sdio-irq; > - keep-power-in-suspend; > - mmc-pwrseq = <&sdio_pwrseq>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc_wl>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sfc { > - pinctrl-0 = <&fspi_pins>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - flash@0 { > - compatible = "jedec,spi-nor"; > - reg = <0>; > - spi-max-frequency = <24000000>; > - spi-rx-bus-width = <4>; > - spi-tx-bus-width = <1>; > - }; > -}; > - > -/* spdif is exposed on con40 pin 18 */ > -&spdif { > - status = "okay"; > -}; > - > -/* spi1 is exposed on con40 > - * pin 11 - spi1_mosi_m1 > - * pin 13 - spi1_miso_m1 > - * pin 15 - spi1_clk_m1 > - * pin 17 - spi1_cs0_m1 > - */ > -&spi1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; > -}; > - > -&tsadc { > - /* tshut mode 0:CRU 1:GPIO */ > - rockchip,hw-tshut-mode = <1>; > - /* tshut polarity 0:LOW 1:HIGH */ > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -/* uart0 is exposed on con40 > - * pin 12 - uart0_tx > - * pin 14 - uart0_rx > - */ > -&uart0 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart0_xfer>; > - status = "okay"; > -}; > - > -&uart1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; > - status = "okay"; > - uart-has-rtscts; > - > - bluetooth { > - compatible = "brcm,bcm43438-bt"; > - clocks = <&rk817 1>; > - clock-names = "lpo"; > - host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; > - device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; > - shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; > - vbat-supply = <&vcc_sys>; > - vddio-supply = <&vcca1v8_pmu>; > - max-speed = <3000000>; > - }; > -}; > - > -/* uart2 is exposed on con40 > - * pin 8 - uart2_tx_m0_debug > - * pin 10 - uart2_rx_m0_debug > - */ > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - dr_mode = "host"; > - status = "okay"; > -}; > - > -/* usb3 controller is muxed with sata1 */ > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb20_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb20_otg>; > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - phy-supply = <&vcc5v0_usb20_host>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc5v0_usb20_host>; > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3566-quartz64-b.dts b/arch/arm/dts/rk3566-quartz64-b.dts > deleted file mode 100644 > index 2d92713be2a0..000000000000 > --- a/arch/arm/dts/rk3566-quartz64-b.dts > +++ /dev/null > @@ -1,737 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3566.dtsi" > - > -/ { > - model = "Pine64 RK3566 Quartz64-B Board"; > - compatible = "pine64,quartz64-b", "rockchip,rk3566"; > - > - aliases { > - ethernet0 = &gmac1; > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - mmc2 = &sdmmc1; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - gmac1_clkin: external-gmac1-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "gmac1_clkin"; > - #clock-cells = <0>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led-user { > - label = "user-led"; > - default-state = "on"; > - gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&user_led_enable_h>; > - retain-state-suspended; > - }; > - }; > - > - sound { > - compatible = "simple-audio-card"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,name = "Analog RK809"; > - simple-audio-card,mclk-fs = <256>; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s1_8ch>; > - }; > - > - simple-audio-card,codec { > - sound-dai = <&rk809>; > - }; > - }; > - > - sdio_pwrseq: sdio-pwrseq { > - status = "okay"; > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk809 1>; > - clock-names = "ext_clock"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_enable_h>; > - reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; > - post-power-on-delay-ms = <100>; > - power-off-delay-us = <5000000>; > - }; > - > - vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_enable_h>; > - regulator-name = "vcc3v3_pcie_p"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc_3v3>; > - }; > - > - vcc5v0_in: vcc5v0-in-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_in"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_in>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-always-on; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb30_host"; > - enable-active-high; > - gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb30_host_en_h>; > - regulator-always-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb_otg"; > - enable-active-high; > - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en_h>; > - regulator-always-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_sys>; > - }; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&combphy2 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; > - clock_in_out = "input"; > - phy-mode = "rgmii"; > - phy-supply = <&vcc_3v3>; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m1_miim > - &gmac1m1_tx_bus2 > - &gmac1m1_rx_bus2 > - &gmac1m1_rgmii_clk > - &gmac1m1_clkinout > - &gmac1m1_rgmii_bus>; > - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f, also works well here */ > - snps,reset-delays-us = <0 20000 100000>; > - tx_delay = <0x4f>; > - rx_delay = <0x24>; > - phy-handle = <&rgmii_phy1>; > - status = "okay"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - clock-output-names = "rk808-clkout1", "rk808-clkout2"; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; > - rockchip,system-power-controller; > - #sound-dai-cells = <0>; > - wakeup-source; > - #clock-cells = <1>; > - > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - > - regulators { > - vdd_log: DCDC_REG1 { > - regulator-name = "vdd_log"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <1350000>; > - regulator-initial-mode = <0x2>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-boot-on; > - regulator-name = "vcc_3v3"; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - }; > - }; > - }; > -}; > - > -/* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */ > -&i2c2 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c2m1_xfer>; > - status = "okay"; > -}; > - > -/* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */ > -&i2c3 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c3m1_xfer>; > - status = "okay"; > -}; > - > -/* > - * i2c4_m0 is exposed on PI40, pulled up to vcc_3v3 > - * pin 27 - i2c4_sda_m0 > - * pin 28 - i2c4_scl_m0 > - */ > -&i2c4 { > - status = "okay"; > -}; > - > -/* > - * i2c5_m0 is exposed on PI40 > - * pin 29 - i2c5_scl_m0 > - * pin 31 - i2c5_sda_m0 > - */ > -&i2c5 { > - status = "disabled"; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&i2s1_8ch { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s1m0_sclktx > - &i2s1m0_lrcktx > - &i2s1m0_sdi0 > - &i2s1m0_sdo0>; > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@1 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x1>; > - }; > -}; > - > -&pcie2x1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_reset_h>; > - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie_p>; > - status = "okay"; > -}; > - > -&pinctrl { > - bt { > - bt_enable_h: bt-enable-h { > - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - bt_host_wake_l: bt-host-wake-l { > - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - > - bt_wake_l: bt-wake-l { > - rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - leds { > - user_led_enable_h: user-led-enable-h { > - rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie_enable_h: pcie-enable-h { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie_reset_h: pcie-reset-h { > - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int: pmic_int { > - rockchip,pins = > - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - sdio-pwrseq { > - wifi_enable_h: wifi-enable-h { > - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb { > - vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h { > - rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h { > - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - status = "okay"; > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcca1v8_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcca1v8_pmu>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_3v3>; > - vccio7-supply = <&vcc_3v3>; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - mmc-hs200-1_8v; > - non-removable; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr50; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&sdmmc1 { > - bus-width = <4>; > - cap-sd-highspeed; > - cap-sdio-irq; > - keep-power-in-suspend; > - mmc-pwrseq = <&sdio_pwrseq>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; > - vmmc-supply = <&vcc3v3_sys>; > - vqmmc-supply = <&vcca1v8_pmu>; > - status = "okay"; > -}; > - > -&sfc { > - pinctrl-0 = <&fspi_pins>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "okay"; > - > - flash@0 { > - compatible = "jedec,spi-nor"; > - reg = <0>; > - spi-max-frequency = <24000000>; > - spi-rx-bus-width = <4>; > - spi-tx-bus-width = <1>; > - }; > -}; > - > -&tsadc { > - status = "okay"; > -}; > - > -&uart1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; > - status = "okay"; > - uart-has-rtscts; > - > - bluetooth { > - compatible = "brcm,bcm4345c5"; > - clocks = <&rk809 1>; > - clock-names = "lpo"; > - device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; > - host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; > - shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; > - vbat-supply = <&vcc3v3_sys>; > - vddio-supply = <&vcca1v8_pmu>; > - }; > -}; > - > -/* > - * uart2_m0 is exposed on PI40 > - * pin 8 - uart2_tx_m0 > - * pin 10 - uart2_rx_m0 > - */ > -&uart2 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb30_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc5v0_usb30_host>; > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3566-radxa-cm3-io.dts b/arch/arm/dts/rk3566-radxa-cm3-io.dts > deleted file mode 100644 > index 3ae24e39450a..000000000000 > --- a/arch/arm/dts/rk3566-radxa-cm3-io.dts > +++ /dev/null > @@ -1,281 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2022 Radxa Limited > - * Copyright (c) 2022 Amarula Solutions(India) > - */ > - > -/dts-v1/; > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3566.dtsi" > -#include "rk3566-radxa-cm3.dtsi" > - > -/ { > - model = "Radxa Compute Module 3(CM3) IO Board"; > - compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566"; > - > - aliases { > - ethernet0 = &gmac1; > - mmc1 = &sdmmc0; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - gmac1_clkin: external-gmac1-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "gmac1_clkin"; > - #clock-cells = <0>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led-1 { > - gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>; > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_ACTIVITY; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&pi_nled_activity>; > - }; > - }; > - > - vcc5v0_usb30: vcc5v0-usb30-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb30"; > - enable-active-high; > - gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb30_en_h>; > - regulator-always-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc_sys>; > - }; > - > - vcca1v8_image: vcca1v8-image-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcca1v8_image"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc_1v8_p>; > - }; > - > - vdda0v9_image: vdda0v9-image-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcca0v9_image"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - vin-supply = <&vdda_0v9>; > - }; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; > - assigned-clock-rates = <0>, <125000000>; > - clock_in_out = "input"; > - phy-handle = <&rgmii_phy1>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m0_miim > - &gmac1m0_tx_bus2 > - &gmac1m0_rx_bus2 > - &gmac1m0_rgmii_clk > - &gmac1m0_rgmii_bus > - &gmac1m0_clkinout>; > - snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - tx_delay = <0x46>; > - rx_delay = <0x2e>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - }; > -}; > - > -&pinctrl { > - gmac1 { > - gmac1m0_miim: gmac1m0-miim { > - rockchip,pins = > - /* gmac1_mdcm0 */ > - <3 RK_PC4 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_mdiom0 */ > - <3 RK_PC5 3 &pcfg_pull_none_drv_level_15>; > - }; > - > - gmac1m0_rx_bus2: gmac1m0-rx-bus2 { > - rockchip,pins = > - /* gmac1_rxd0m0 */ > - <3 RK_PB1 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_rxd1m0 */ > - <3 RK_PB2 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_rxdvcrsm0 */ > - <3 RK_PB3 3 &pcfg_pull_none_drv_level_15>; > - }; > - > - gmac1m0_tx_bus2: gmac1m0-tx-bus2 { > - rockchip,pins = > - /* gmac1_txd0m0 */ > - <3 RK_PB5 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_txd1m0 */ > - <3 RK_PB6 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_txenm0 */ > - <3 RK_PB7 3 &pcfg_pull_none_drv_level_15>; > - }; > - > - gmac1m0_rgmii_clk: gmac1m0-rgmii-clk { > - rockchip,pins = > - /* gmac1_rxclkm0 */ > - <3 RK_PA7 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_txclkm0 */ > - <3 RK_PA6 3 &pcfg_pull_none_drv_level_15>; > - }; > - > - gmac1m0_rgmii_bus: gmac1m0-rgmii-bus { > - rockchip,pins = > - /* gmac1_rxd2m0 */ > - <3 RK_PA4 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_rxd3m0 */ > - <3 RK_PA5 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_txd2m0 */ > - <3 RK_PA2 3 &pcfg_pull_none_drv_level_15>, > - /* gmac1_txd3m0 */ > - <3 RK_PA3 3 &pcfg_pull_none_drv_level_15>; > - }; > - > - gmac1m0_clkinout: gmac1m0-clkinout { > - rockchip,pins = > - /* gmac1_mclkinoutm0 */ > - <3 RK_PC0 3 &pcfg_pull_none_drv_level_15>; > - }; > - }; > - > - leds { > - pi_nled_activity: pi-nled-activity { > - rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - sdcard { > - sdmmc_pwren: sdmmc-pwren { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb { > - vcc5v0_usb30_en_h: vcc5v0-host-en-h { > - rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-mmc-highspeed; > - cap-sd-highspeed; > - disable-wp; > - vqmmc-supply = <&vccio_sd>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb30>; > - status = "okay"; > -}; > - > -&usb2phy1_host { > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3566-radxa-cm3.dtsi b/arch/arm/dts/rk3566-radxa-cm3.dtsi > deleted file mode 100644 > index 45de2630bb50..000000000000 > --- a/arch/arm/dts/rk3566-radxa-cm3.dtsi > +++ /dev/null > @@ -1,425 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2022 Radxa Limited > - * Copyright (c) 2022 Amarula Solutions(India) > - */ > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > - > -/ { > - compatible = "radxa,cm3", "rockchip,rk3566"; > - > - aliases { > - mmc0 = &sdhci; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led-0 { > - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_STATUS; > - linux,default-trigger = "timer"; > - default-state = "on"; > - pinctrl-names = "default"; > - pinctrl-0 = <&user_led2>; > - }; > - }; > - > - vcc_sys: vcc-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > - > - vcc_1v8: vcc-1v8-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc_1v8_p>; > - }; > - > - vcc_3v3: vcc-3v3-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - vcca_1v8: vcca-1v8-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc_1v8_p>; > - }; > - > - sdio_pwrseq: pwrseq-sdio { > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk817 1>; > - clock-names = "ext_clock"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_reg_on_h>; > - reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; > - }; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu_npu>; > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <712500>; > - regulator-max-microvolt = <1390000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk817: pmic@20 { > - compatible = "rockchip,rk817"; > - reg = <0x20>; > - #clock-cells = <1>; > - clock-output-names = "rk817-clkout1", "rk817-clkout2"; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int_l>; > - rockchip,system-power-controller; > - wakeup-source; > - > - vcc1-supply = <&vcc_sys>; > - vcc2-supply = <&vcc_sys>; > - vcc3-supply = <&vcc_sys>; > - vcc4-supply = <&vcc_sys>; > - vcc5-supply = <&vcc_sys>; > - vcc6-supply = <&vcc_sys>; > - vcc7-supply = <&vcc_sys>; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdd_gpu_npu: DCDC_REG2 { > - regulator-name = "vdd_gpu_npu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vcc3v3_sys: DCDC_REG4 { > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG1 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcc_1v8_p: LDO_REG7 { > - regulator-name = "vcc_1v8_p"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc1v8_dvp: LDO_REG8 { > - regulator-name = "vcc1v8_dvp"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc2v8_dvp: LDO_REG9 { > - regulator-name = "vcc2v8_dvp"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - }; > - }; > -}; > - > -&pinctrl { > - bluetooth { > - bt_host_wake_h: bt-host-wake-h { > - rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - bt_reg_on_h: bt-reg-on-h { > - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - bt_wake_host_h: bt-wake-host-h { > - rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - leds { > - user_led2: user-led2 { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - wifi { > - wifi_reg_on_h: wifi-reg-on-h { > - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - wifi_host_wake_h: wifi-host-wake-h { > - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc_3v3>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_3v3>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sdmmc1 { > - #address-cells = <1>; > - #size-cells = <0>; > - bus-width = <4>; > - disable-wp; > - cap-sd-highspeed; > - cap-sdio-irq; > - keep-power-in-suspend; > - mmc-pwrseq = <&sdio_pwrseq>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > - > - wifi@1 { > - compatible = "brcm,bcm43455-fmac"; > - reg = <1>; > - interrupt-parent = <&gpio2>; > - interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "host-wake"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_host_wake_h>; > - }; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - mmc-hs200-1_8v; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&uart1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>; > - status = "okay"; > - > - bluetooth { > - compatible = "brcm,bcm4345c5"; > - clocks = <&rk817 1>; > - clock-names = "lpo"; > - device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>; > - host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; > - reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>; > - vbat-supply = <&vcc_3v3>; > - vddio-supply = <&vcc_1v8>; > - }; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > diff --git a/arch/arm/dts/rk3566-soquartz-blade.dts b/arch/arm/dts/rk3566-soquartz-blade.dts > deleted file mode 100644 > index fdbf1c783242..000000000000 > --- a/arch/arm/dts/rk3566-soquartz-blade.dts > +++ /dev/null > @@ -1,198 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/input/input.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > - > -#include "rk3566-soquartz.dtsi" > - > -/ { > - model = "PINE64 RK3566 SOQuartz on Blade carrier board"; > - compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566"; > - > - aliases { > - ethernet0 = &gmac1; > - }; > - > - /* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */ > - vcc3v0_sd: vcc3v0-sd-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v0_sd"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - /* labeled VCC_SSD in schematic */ > - vcc3v3_pcie_p: vcc3v3-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_pcie_p"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vbus>; > - }; > - > - vcc5v_dcin: vcc5v-dcin-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v_dcin"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > -}; > - > -&combphy2 { > - phy-supply = <&vcc3v3_sys>; > - status = "okay"; > -}; > - > -&gmac1 { > - status = "okay"; > -}; > - > -/* > - * i2c1 is exposed on CM1 / Module1A > - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu > - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu > - */ > -&i2c1 { > - status = "okay"; > - > -}; > - > -/* > - * i2c2 is exposed on CM1 / Module1A - to PI40 > - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch > - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 > - */ > -&i2c2 { > - status = "disabled"; > -}; > - > -/* > - * i2c3 is exposed on CM1 / Module1A - to PI40 > - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 > - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 > - */ > -&i2c3 { > - status = "disabled"; > -}; > - > -/* > - * i2c4 is exposed on CM2 / Module1B - to PI40 > - * pin 45 - GPIO24 - i2c4_scl_m1 > - * pin 47 - GPIO23 - i2c4_sda_m1 > - */ > -&i2c4 { > - status = "disabled"; > -}; > - > -/* > - * i2s1_8ch is exposed on CM1 / Module1A - to PI40 > - * pin 24 - GPIO26 - i2s1_sdi1_m1 > - * pin 25 - GPIO21 - i2s1_sdo0_m1 > - * pin 26 - GPIO19 - i2s1_lrck_tx_m1 > - * pin 27 - GPIO20 - i2s1_sdi0_m1 > - * pin 29 - GPIO16 - i2s1_sdi3_m1 > - * pin 30 - GPIO6 - i2s1_sdi2_m1 > - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 > - * pin 41 - GPIO25 - i2s1_sdo2_m1 > - * pin 49 - GPIO18 - i2s1_sclk_tx_m1 > - * pin 50 - GPIO17 - i2s1_mclk_m1 > - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 > - */ > -&i2s1_8ch { > - status = "disabled"; > -}; > - > -&led_diy { > - color = <LED_COLOR_ID_RED>; > - function = LED_FUNCTION_DISK_ACTIVITY; > - linux,default-trigger = "disk-activity"; > - status = "okay"; > -}; > - > -&led_work { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_STATUS; > - linux,default-trigger = "heartbeat"; > - status = "okay"; > -}; > - > -&pcie2x1 { > - vpcie3v3-supply = <&vcc3v3_pcie_p>; > - status = "okay"; > -}; > - > -&rgmii_phy1 { > - status = "okay"; > -}; > - > -/* > - * saradc is exposed on CM1 / Module1A - to J2 > - * pin 94 - AIN1 - saradc_vin3 > - * pin 96 - AIN0 - saradc_vin2 > - */ > -&saradc { > - status = "disabled"; > -}; > - > -&sdmmc0 { > - vmmc-supply = <&vcc3v0_sd>; > - status = "okay"; > -}; > - > -/* > - * spi3 is exposed on CM1 / Module1A - to PI40 > - * pin 37 - GPIO7 - spi3_cs1_m0 > - * pin 38 - GPIO11 - spi3_clk_m0 > - * pin 39 - GPIO8 - spi3_cs0_m0 > - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch > - * pin 44 - GPIO10 - spi3_mosi_m0 > - */ > -&spi3 { > - status = "disabled"; > -}; > - > -/* > - * uart2 is exposed on CM1 / Module1A - to PI40 > - * pin 51 - GPIO15 - uart2_rx_m0 > - * pin 55 - GPIO14 - uart2_tx_m0 > - */ > -&uart2 { > - status = "okay"; > -}; > - > -/* > - * uart7 is exposed on CM1 / Module1A - to PI40 > - * pin 46 - GPIO22 - uart7_tx_m2 > - * pin 47 - GPIO23 - uart7_rx_m2 > - */ > -&uart7 { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vbus>; > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - status = "okay"; > -}; > - > -&vbus { > - vin-supply = <&vcc5v_dcin>; > -}; > diff --git a/arch/arm/dts/rk3566-soquartz-cm4.dts b/arch/arm/dts/rk3566-soquartz-cm4.dts > deleted file mode 100644 > index 6ed3fa4aee34..000000000000 > --- a/arch/arm/dts/rk3566-soquartz-cm4.dts > +++ /dev/null > @@ -1,196 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include "rk3566-soquartz.dtsi" > - > -/ { > - model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board"; > - compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566"; > - > - aliases { > - ethernet0 = &gmac1; > - }; > - > - /* labeled +12v in schematic */ > - vcc12v_dcin: vcc12v-dcin-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc12v_dcin"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - /* labeled +5v in schematic */ > - vcc_5v: vcc-5v-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_5v"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc_sd_pwr: vcc-sd-pwr-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_sd_pwr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_sys>; > - }; > -}; > - > -/* phy for pcie */ > -&combphy2 { > - phy-supply = <&vcc3v3_sys>; > - status = "okay"; > -}; > - > -&gmac1 { > - status = "okay"; > -}; > - > -/* > - * i2c1 is exposed on CM1 / Module1A > - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu > - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu > - */ > -&i2c1 { > - status = "okay"; > - > - /* > - * the rtc interrupt is tied to PMIC_PWRON, > - * it will force reset the board if triggered. > - */ > - pcf85063: rtc@51 { > - compatible = "nxp,pcf85063"; > - reg = <0x51>; > - }; > -}; > - > -/* > - * i2c2 is exposed on CM1 / Module1A - to PI40 > - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch > - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 > - */ > -&i2c2 { > - status = "disabled"; > -}; > - > -/* > - * i2c3 is exposed on CM1 / Module1A - to PI40 > - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 > - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 > - */ > -&i2c3 { > - status = "disabled"; > -}; > - > -/* > - * i2c4 is exposed on CM2 / Module1B - to PI40 > - * pin 45 - GPIO24 - i2c4_scl_m1 > - * pin 47 - GPIO23 - i2c4_sda_m1 > - */ > -&i2c4 { > - status = "disabled"; > -}; > - > -/* > - * i2s1_8ch is exposed on CM1 / Module1A - to PI40 > - * pin 24 - GPIO26 - i2s1_sdi1_m1 > - * pin 25 - GPIO21 - i2s1_sdo0_m1 > - * pin 26 - GPIO19 - i2s1_lrck_tx_m1 > - * pin 27 - GPIO20 - i2s1_sdi0_m1 > - * pin 29 - GPIO16 - i2s1_sdi3_m1 > - * pin 30 - GPIO6 - i2s1_sdi2_m1 > - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 > - * pin 41 - GPIO25 - i2s1_sdo2_m1 > - * pin 49 - GPIO18 - i2s1_sclk_tx_m1 > - * pin 50 - GPIO17 - i2s1_mclk_m1 > - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 > - */ > -&i2s1_8ch { > - status = "disabled"; > -}; > - > -&led_diy { > - status = "okay"; > -}; > - > -&led_work { > - status = "okay"; > -}; > - > -&pcie2x1 { > - vpcie3v3-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&rgmii_phy1 { > - status = "okay"; > -}; > - > -/* > - * saradc is exposed on CM1 / Module1A - to J2 > - * pin 94 - AIN1 - saradc_vin3 > - * pin 96 - AIN0 - saradc_vin2 > - */ > -&saradc { > - status = "disabled"; > -}; > - > -&sdmmc0 { > - vmmc-supply = <&vcc_sd_pwr>; > - status = "okay"; > -}; > - > -/* > - * spi3 is exposed on CM1 / Module1A - to PI40 > - * pin 37 - GPIO7 - spi3_cs1_m0 > - * pin 38 - GPIO11 - spi3_clk_m0 > - * pin 39 - GPIO8 - spi3_cs0_m0 > - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch > - * pin 44 - GPIO10 - spi3_mosi_m0 > - */ > -&spi3 { > - status = "disabled"; > -}; > - > -/* > - * uart2 is exposed on CM1 / Module1A - to PI40 > - * pin 51 - GPIO15 - uart2_rx_m0 > - * pin 55 - GPIO14 - uart2_tx_m0 > - */ > -&uart2 { > - status = "okay"; > -}; > - > -/* > - * uart7 is exposed on CM1 / Module1A - to PI40 > - * pin 46 - GPIO22 - uart7_tx_m2 > - * pin 47 - GPIO23 - uart7_rx_m2 > - */ > -&uart7 { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc_5v>; > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - status = "okay"; > -}; > - > -&vbus { > - vin-supply = <&vcc_5v>; > -}; > diff --git a/arch/arm/dts/rk3566-soquartz-model-a.dts b/arch/arm/dts/rk3566-soquartz-model-a.dts > deleted file mode 100644 > index f2095dfa4eaf..000000000000 > --- a/arch/arm/dts/rk3566-soquartz-model-a.dts > +++ /dev/null > @@ -1,236 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include "rk3566-soquartz.dtsi" > - > -/ { > - model = "PINE64 RK3566 SOQuartz on Model A carrier board"; > - compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566"; > - > - aliases { > - ethernet0 = &gmac1; > - }; > - > - /* labeled DCIN_12V in schematic */ > - vcc12v_dcin: vcc12v-dcin-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc12v_dcin"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - vcc5v0_usb: vcc5v0-usb-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - /* > - * Labelled VCC3V0_SD in schematic to not conflict with PMIC > - * regulator, it's 3.3v in actuality > - */ > - vcc3v0_sd: vcc3v0-sd-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v0_sd"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - vcc3v3_pcie: vcc3v3-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_pcie"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc12v_pcie: vcc12v-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc12v_pcie"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > -}; > - > -/* phy for pcie */ > -&combphy2 { > - phy-supply = <&vcc3v3_sys>; > - status = "okay"; > -}; > - > -&gmac1 { > - status = "okay"; > -}; > - > -/* > - * i2c1 is exposed on CM1 / Module1A > - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu > - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu > - */ > -&i2c1 { > - status = "okay"; > - > - /* > - * the rtc interrupt is tied to PMIC_PWRON, > - * it will force reset the board if triggered. > - */ > - pcf85063: rtc@51 { > - compatible = "nxp,pcf85063"; > - reg = <0x51>; > - }; > -}; > - > -/* > - * i2c2 is exposed on CM1 / Module1A - to PI40 > - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch > - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 > - */ > -&i2c2 { > - status = "disabled"; > -}; > - > -/* > - * i2c3 is exposed on CM1 / Module1A - to PI40 > - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 > - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 > - */ > -&i2c3 { > - status = "disabled"; > -}; > - > -/* > - * i2c4 is exposed on CM2 / Module1B - to PI40 > - * pin 45 - GPIO24 - i2c4_scl_m1 > - * pin 47 - GPIO23 - i2c4_sda_m1 > - */ > -&i2c4 { > - status = "disabled"; > -}; > - > -/* > - * i2s1_8ch is exposed on CM1 / Module1A - to PI40 > - * pin 24 - GPIO26 - i2s1_sdi1_m1 > - * pin 25 - GPIO21 - i2s1_sdo0_m1 > - * pin 26 - GPIO19 - i2s1_lrck_tx_m1 > - * pin 27 - GPIO20 - i2s1_sdi0_m1 > - * pin 29 - GPIO16 - i2s1_sdi3_m1 > - * pin 30 - GPIO6 - i2s1_sdi2_m1 > - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 > - * pin 41 - GPIO25 - i2s1_sdo2_m1 > - * pin 49 - GPIO18 - i2s1_sclk_tx_m1 > - * pin 50 - GPIO17 - i2s1_mclk_m1 > - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 > - */ > -&i2s1_8ch { > - status = "disabled"; > -}; > - > -&led_diy { > - status = "okay"; > -}; > - > -&led_work { > - status = "okay"; > -}; > - > -&pcie2x1 { > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&rgmii_phy1 { > - status = "okay"; > -}; > - > -&rgmii_phy1 { > - status = "okay"; > -}; > - > -/* > - * saradc is exposed on CM1 / Module1A - to J2 > - * pin 94 - AIN1 - saradc_vin3 > - * pin 96 - AIN0 - saradc_vin2 > - */ > -&saradc { > - status = "disabled"; > -}; > - > -/* > - * vmmc-supply is vcc3v3_sd on v1.0 and vcc3v0_sd on v1.1+ > - * the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys, > - * so we use vcc3v3_sd here to ensure the regulator is enabled on older boards. > - */ > -&sdmmc0 { > - vmmc-supply = <&vcc3v3_sd>; > - status = "okay"; > -}; > - > -/* > - * spi3 is exposed on CM1 / Module1A - to PI40 > - * pin 37 - GPIO7 - spi3_cs1_m0 > - * pin 38 - GPIO11 - spi3_clk_m0 > - * pin 39 - GPIO8 - spi3_cs0_m0 > - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch > - * pin 44 - GPIO10 - spi3_mosi_m0 > - */ > -&spi3 { > - status = "disabled"; > -}; > - > -/* > - * uart2 is exposed on CM1 / Module1A - to PI40 > - * pin 51 - GPIO15 - uart2_rx_m0 > - * pin 55 - GPIO14 - uart2_tx_m0 > - */ > -&uart2 { > - status = "okay"; > -}; > - > -/* > - * uart7 is exposed on CM1 / Module1A - to PI40 > - * pin 46 - GPIO22 - uart7_tx_m2 > - * pin 47 - GPIO23 - uart7_rx_m2 > - */ > -&uart7 { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb>; > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - status = "okay"; > -}; > - > -&vbus { > - vin-supply = <&vcc5v0_usb>; > -}; > - > -&vcc3v3_sd { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - status = "okay"; > -}; > diff --git a/arch/arm/dts/rk3566-soquartz.dtsi b/arch/arm/dts/rk3566-soquartz.dtsi > deleted file mode 100644 > index bfb7b952f4c5..000000000000 > --- a/arch/arm/dts/rk3566-soquartz.dtsi > +++ /dev/null > @@ -1,684 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3566.dtsi" > - > -/ { > - model = "Pine64 RK3566 SoQuartz SOM"; > - compatible = "pine64,soquartz", "rockchip,rk3566"; > - > - aliases { > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - mmc2 = &sdmmc1; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - gmac1_clkin: external-gmac1-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "gmac1_clkin"; > - #clock-cells = <0>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led_diy: led-diy { > - label = "diy-led"; > - default-state = "on"; > - gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&diy_led_enable_h>; > - retain-state-suspended; > - status = "disabled"; > - }; > - > - led_work: led-work { > - label = "work-led"; > - default-state = "off"; > - gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&work_led_enable_h>; > - retain-state-suspended; > - status = "disabled"; > - }; > - }; > - > - sdio_pwrseq: sdio-pwrseq { > - status = "okay"; > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk809 1>; > - clock-names = "ext_clock"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_enable_h>; > - reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; > - }; > - > - vbus: vbus-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vbus"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > - > - /* sourced from vbus, vbus is provided by the carrier board */ > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vbus>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; > - clock_in_out = "input"; > - phy-supply = <&vcc_3v3>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m0_miim > - &gmac1m0_tx_bus2 > - &gmac1m0_rx_bus2 > - &gmac1m0_rgmii_clk > - &gmac1m0_clkinout > - &gmac1m0_rgmii_bus>; > - snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f, also works well here */ > - snps,reset-delays-us = <0 20000 100000>; > - tx_delay = <0x30>; > - rx_delay = <0x10>; > - phy-handle = <&rgmii_phy1>; > - status = "disabled"; > -}; > - > -&gpio0 { > - nextrst-hog { > - gpio-hog; > - /* > - * GPIO_ACTIVE_LOW + output-low here means that the pin is set > - * to high, because output-low decides the value pre-inversion. > - */ > - gpios = <RK_PA5 GPIO_ACTIVE_LOW>; > - line-name = "nEXTRST"; > - output-low; > - }; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <1>; > - clock-output-names = "rk808-clkout1", "rk808-clkout2"; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int_l>; > - rockchip,system-power-controller; > - wakeup-source; > - > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-name = "vcc_ddr"; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-initial-mode = <0x2>; > - regulator-name = "vdd_npu"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda0v9_image"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda_0v9"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-name = "vdda0v9_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vccio_acodec"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vccio_sd"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "vcc3v3_pmu"; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcca_1v8"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcca1v8_pmu"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcca1v8_image"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - status = "disabled"; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - }; > - }; > -}; > - > -/* > - * i2c1 is exposed on CM1 / Module1A > - * pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu > - * pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu > - */ > -&i2c1 { > - status = "disabled"; > -}; > - > -/* > - * i2c2 is exposed on CM1 / Module1A > - * pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch > - * pin 58 - i2c2_sda_m1, pullup to vcc_3v3 > - */ > -&i2c2 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c2m1_xfer>; > - status = "disabled"; > -}; > - > -/* > - * i2c3 is exposed on CM1 / Module1A > - * pin 35 - i2c3_scl_m0, pullup to vcc_3v3 > - * pin 36 - i2c3_sda_m0, pullup to vcc_3v3 > - */ > -&i2c3 { > - status = "disabled"; > -}; > - > -/* > - * i2c4 is exposed on CM2 / Module1B > - * pin 45 - i2c4_scl_m1 > - * pin 47 - i2c4_sda_m1 > - */ > -&i2c4 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c4m1_xfer>; > - status = "disabled"; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -/* > - * i2s1_8ch is exposed on CM1 / Module1A > - * pin 24 - i2s1_sdi1_m1 > - * pin 25 - i2s1_sdo0_m1 > - * pin 26 - i2s1_lrck_tx_m1 > - * pin 27 - i2s1_sdi0_m1 > - * pin 29 - i2s1_sdi3_m1 > - * pin 30 - i2s1_sdi2_m1 > - * pin 40 - i2s1_sdo1_m1, shared with spi3 > - * pin 41 - i2s1_sdo2_m1 > - * pin 49 - i2s1_sclk_tx_m1 > - * pin 50 - i2s1_mclk_m1 > - * pin 56 - i2s1_sdo3_m1, shared with i2c2 > - */ > -&i2s1_8ch { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx > - &i2s1m1_lrcktx &i2s1m1_lrckrx > - &i2s1m1_sdi0 &i2s1m1_sdi1 > - &i2s1m1_sdi2 &i2s1m1_sdi3 > - &i2s1m1_sdo0 &i2s1m1_sdo1 > - &i2s1m1_sdo2 &i2s1m1_sdo3>; > - status = "disabled"; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0>; > - status = "disabled"; > - }; > -}; > - > -&pcie2x1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_reset_h>; > - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; > -}; > - > -&pinctrl { > - bt { > - bt_enable_h: bt-enable-h { > - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - bt_host_wake_l: bt-host-wake-l { > - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - > - bt_wake_l: bt-wake-l { > - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - leds { > - work_led_enable_h: work-led-enable-h { > - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - diy_led_enable_h: diy-led-enable-h { > - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie_clkreq_h: pcie-clkreq-h { > - rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - pcie_reset_h: pcie-reset-h { > - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - sdio-pwrseq { > - wifi_enable_h: wifi-enable-h { > - rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vcc_3v3>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_3v3>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -/* > - * saradc is exposed on CM1 / Module1A > - * pin 94 - saradc_vin3 > - * pin 96 - saradc_vin2 > - */ > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "disabled"; > -}; > - > -&sdhci { > - bus-width = <8>; > - mmc-hs200-1_8v; > - non-removable; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - broken-cd; > - bus-width = <4>; > - cap-sd-highspeed; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - vqmmc-supply = <&vccio_sd>; > - status = "disabled"; > -}; > - > -&sdmmc1 { > - bus-width = <4>; > - cap-sd-highspeed; > - cap-sdio-irq; > - keep-power-in-suspend; > - mmc-pwrseq = <&sdio_pwrseq>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; > - sd-uhs-sdr50; > - vmmc-supply = <&vcc3v3_sys>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -/* > - * spi3 is exposed on CM1 / Module1A > - * pin 37 - spi3_cs1_m0 > - * pin 38 - spi3_clk_m0 > - * pin 39 - spi3_cs0_m0 > - * pin 40 - spi3_miso_m0, shared with i2s1_8ch > - * pin 44 - spi3_mosi_m0 > - */ > -&spi3 { > - status = "disabled"; > -}; > - > -&tsadc { > - status = "okay"; > -}; > - > -&uart1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; > - uart-has-rtscts; > - status = "okay"; > - > - bluetooth { > - compatible = "brcm,bcm43438-bt"; > - clocks = <&rk809 1>; > - clock-names = "lpo"; > - device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; > - host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; > - shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; > - vbat-supply = <&vcc3v3_sys>; > - vddio-supply = <&vcca1v8_pmu>; > - }; > -}; > - > -/* > - * uart2 is exposed on CM1 / Module1A > - * pin 51 - uart2_rx_m0 > - * pin 55 - uart2_tx_m0 > - */ > -&uart2 { > - status = "disabled"; > -}; > - > -/* > - * uart7 is exposed on CM1 / Module1A > - * pin 46 - uart7_tx_m2 > - * pin 47 - uart7_rx_m2 > - */ > -&uart7 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart7m2_xfer>; > - status = "disabled"; > -}; > - > -/* dwc3_otg is the only usb port available */ > -&usb2phy0 { > - status = "disabled"; > -}; > - > -&usb2phy0_otg { > - status = "disabled"; > -}; > - > -&usb_host0_xhci { > - status = "disabled"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3566.dtsi b/arch/arm/dts/rk3566.dtsi > deleted file mode 100644 > index 6c4b17d27bdc..000000000000 > --- a/arch/arm/dts/rk3566.dtsi > +++ /dev/null > @@ -1,35 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -#include "rk356x.dtsi" > - > -/ { > - compatible = "rockchip,rk3566"; > -}; > - > -&pipegrf { > - compatible = "rockchip,rk3566-pipe-grf", "syscon"; > -}; > - > -&power { > - power-domain@RK3568_PD_PIPE { > - reg = <RK3568_PD_PIPE>; > - clocks = <&cru PCLK_PIPE>; > - pm_qos = <&qos_pcie2x1>, > - <&qos_sata1>, > - <&qos_sata2>, > - <&qos_usb3_0>, > - <&qos_usb3_1>; > - #power-domain-cells = <0>; > - }; > -}; > - > -&usb_host0_xhci { > - phys = <&usb2phy0_otg>; > - phy-names = "usb2-phy"; > - extcon = <&usb2phy0>; > - maximum-speed = "high-speed"; > -}; > - > -&vop { > - compatible = "rockchip,rk3566-vop"; > -}; > diff --git a/arch/arm/dts/rk3568-bpi-r2-pro.dts b/arch/arm/dts/rk3568-bpi-r2-pro.dts > deleted file mode 100644 > index f9127ddfbb7d..000000000000 > --- a/arch/arm/dts/rk3568-bpi-r2-pro.dts > +++ /dev/null > @@ -1,852 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Author: Frank Wunderlich <frank-w@public-files.de> > - * > - */ > - > -/dts-v1/; > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3568.dtsi" > - > -/ { > - model = "Bananapi-R2 Pro (RK3568) DDR4 Board"; > - compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568"; > - > - aliases { > - ethernet0 = &gmac0; > - ethernet1 = &gmac1; > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - leds { > - compatible = "gpio-leds"; > - pinctrl-names = "default"; > - pinctrl-0 = <&blue_led_pin &green_led_pin>; > - > - blue_led: led-0 { > - color = <LED_COLOR_ID_BLUE>; > - default-state = "off"; > - function = LED_FUNCTION_STATUS; > - gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; > - }; > - > - green_led: led-1 { > - color = <LED_COLOR_ID_GREEN>; > - default-state = "on"; > - function = LED_FUNCTION_POWER; > - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; > - }; > - }; > - > - dc_12v: dc-12v-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "dc_12v"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - ir-receiver { > - compatible = "gpio-ir-receiver"; > - gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&ir_receiver_pin>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_12v>; > - }; > - > - pcie30_avdd0v9: pcie30-avdd0v9-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - pcie30_avdd1v8: pcie30-avdd1v8-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - /* pi6c pcie clock generator feeds both ports */ > - vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_pcie"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - enable-active-high; > - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; > - startup-delay-us = <200000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ > - vcc3v3_minipcie: vcc3v3-minipcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_minipcie"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - enable-active-high; > - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&minipcie_enable_h>; > - startup-delay-us = <50000>; > - vin-supply = <&vcc3v3_pi6c_05>; > - }; > - > - /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ > - vcc3v3_ngff: vcc3v3-ngff-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_ngff"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - enable-active-high; > - gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&ngffpcie_enable_h>; > - startup-delay-us = <50000>; > - vin-supply = <&vcc3v3_pi6c_05>; > - }; > - > - vcc5v0_usb: vcc5v0-usb-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_usb_host: vcc5v0-usb-host-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_host_en>; > - regulator-name = "vcc5v0_usb_host"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en>; > - regulator-name = "vcc5v0_usb_otg"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > -}; > - > -&combphy0 { > - /* used for USB3 */ > - status = "okay"; > -}; > - > -&combphy1 { > - /* used for USB3 */ > - status = "okay"; > -}; > - > -&combphy2 { > - /* used for SATA */ > - status = "okay"; > -}; > - > -&gmac0 { > - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; > - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; > - clock_in_out = "input"; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac0_miim > - &gmac0_tx_bus2 > - &gmac0_rx_bus2 > - &gmac0_rgmii_clk > - &gmac0_rgmii_bus>; > - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - tx_delay = <0x4f>; > - rx_delay = <0x0f>; > - status = "okay"; > - > - fixed-link { > - speed = <1000>; > - full-duplex; > - pause; > - }; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; > - clock_in_out = "output"; > - phy-handle = <&rgmii_phy1>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m1_miim > - &gmac1m1_tx_bus2 > - &gmac1m1_rx_bus2 > - &gmac1m1_rgmii_clk > - &gmac1m1_rgmii_bus>; > - > - snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - > - tx_delay = <0x3c>; > - rx_delay = <0x2f>; > - > - status = "okay"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>; > - rockchip,system-power-controller; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-always-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-always-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - regulator-always-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > -}; > - > -&i2c3 { > - status = "okay"; > - > - hym8563: rtc@51 { > - compatible = "haoyu,hym8563"; > - reg = <0x51>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>; > - #clock-cells = <0>; > - clock-output-names = "rtcic_32kout"; > - pinctrl-names = "default"; > - pinctrl-0 = <&hym8563_int>; > - wakeup-source; > - }; > -}; > - > -&i2c5 { > - /* pin 3 (SDA) + 4 (SCL) of header con2 */ > - status = "disabled"; > -}; > - > -&i2s0_8ch { > - /* hdmi sound */ > - status = "okay"; > -}; > - > -&mdio0 { > - #address-cells = <1>; > - #size-cells = <0>; > - > - switch@0 { > - compatible = "mediatek,mt7531"; > - reg = <0>; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@1 { > - reg = <1>; > - label = "lan0"; > - }; > - > - port@2 { > - reg = <2>; > - label = "lan1"; > - }; > - > - port@3 { > - reg = <3>; > - label = "lan2"; > - }; > - > - port@4 { > - reg = <4>; > - label = "lan3"; > - }; > - > - port@5 { > - reg = <5>; > - label = "cpu"; > - ethernet = <&gmac0>; > - phy-mode = "rgmii"; > - > - fixed-link { > - speed = <1000>; > - full-duplex; > - pause; > - }; > - }; > - }; > - }; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - }; > -}; > - > -&pcie30phy { > - data-lanes = <1 2>; > - phy-supply = <&vcc3v3_pi6c_05>; > - status = "okay"; > -}; > - > -&pcie3x1 { > - /* M.2 slot */ > - num-lanes = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&ngffpcie_reset_h>; > - reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_ngff>; > - status = "okay"; > -}; > - > -&pcie3x2 { > - /* mPCIe slot */ > - num-lanes = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&minipcie_reset_h>; > - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_minipcie>; > - status = "okay"; > -}; > - > -&pinctrl { > - leds { > - blue_led_pin: blue-led-pin { > - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - green_led_pin: green-led-pin { > - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - hym8563 { > - hym8563_int: hym8563-int { > - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - ir-receiver { > - ir_receiver_pin: ir-receiver-pin { > - rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - minipcie_enable_h: minipcie-enable-h { > - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; > - }; > - > - ngffpcie_enable_h: ngffpcie-enable-h { > - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; > - }; > - > - minipcie_reset_h: minipcie-reset-h { > - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; > - }; > - > - ngffpcie_reset_h: ngffpcie-reset-h { > - rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; > - }; > - }; > - > - pmic { > - pmic_int: pmic_int { > - rockchip,pins = > - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - usb { > - vcc5v0_usb_host_en: vcc5v0_usb_host_en { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_3v3>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&pwm8 { > - /* fan 5v - gnd - pwm */ > - status = "okay"; > -}; > - > -&pwm10 { > - /* pin 7 of header con2 */ > - status = "disabled"; > -}; > - > -&pwm11 { > - /* pin 15 of header con2 */ > - status = "disabled"; > -}; > - > -&pwm12 { > - /* pin 21 of header con2 */ > - /* shared with uart9 + spi3 */ > - pinctrl-0 = <&pwm12m1_pins>; > - status = "disabled"; > -}; > - > -&pwm13 { > - /* pin 24 of header con2 */ > - /* shared with uart9 */ > - pinctrl-0 = <&pwm13m1_pins>; > - status = "disabled"; > -}; > - > -&pwm14 { > - /* pin 23 of header con2 */ > - /* shared with spi3 */ > - pinctrl-0 = <&pwm14m1_pins>; > - status = "disabled"; > -}; > - > -&pwm15 { > - /* pin 19 of header con2 */ > - /* shared with spi3 */ > - pinctrl-0 = <&pwm15m1_pins>; > - status = "disabled"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sata2 { > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&spi3 { > - /* pin 19 (MO) + 21 (MI) + 23 (CK) of header con2 */ > - /* shared with pwm12/14/15 and uart9 */ > - pinctrl-0 = <&spi3m1_pins>; > - status = "disabled"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart0 { > - /* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */ > - status = "disabled"; > -}; > - > -&uart2 { > - /* debug-uart */ > - status = "okay"; > -}; > - > -&uart7 { > - /* pin 11 (TX) + 13 (RX) of header con2 */ > - pinctrl-0 = <&uart7m1_xfer>; > - status = "disabled"; > -}; > - > -&uart9 { > - /* pin 21 (TX) + 24 (RX) of header con2 */ > - /* shared with pwm13 and pwm12/spi3 */ > - pinctrl-0 = <&uart9m1_xfer>; > - status = "disabled"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - dr_mode = "host"; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&usb2phy1 { > - /* USB for PCIe/M2 */ > - status = "okay"; > -}; > - > -&usb2phy1_host { > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-evb.dts b/arch/arm/dts/rk3568-evb.dts > deleted file mode 100644 > index 19f8fc369b13..000000000000 > --- a/arch/arm/dts/rk3568-evb.dts > +++ /dev/null > @@ -1,689 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. > - * > - */ > - > -/dts-v1/; > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3568.dtsi" > - > -/ { > - model = "Rockchip RK3568 EVB1 DDR4 V10 Board"; > - compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568"; > - > - aliases { > - ethernet0 = &gmac0; > - ethernet1 = &gmac1; > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - dc_12v: dc-12v { > - compatible = "regulator-fixed"; > - regulator-name = "dc_12v"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led_work: led-0 { > - gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; > - function = LED_FUNCTION_HEARTBEAT; > - color = <LED_COLOR_ID_BLUE>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&led_work_en>; > - }; > - }; > - > - rk809-sound { > - compatible = "simple-audio-card"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,name = "Analog RK809"; > - simple-audio-card,mclk-fs = <256>; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s1_8ch>; > - }; > - simple-audio-card,codec { > - sound-dai = <&rk809>; > - }; > - }; > - > - vcc3v3_sys: vcc3v3-sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_sys: vcc5v0-sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_usb: vcc5v0-usb { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_usb_host: vcc5v0-usb-host { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_host_en>; > - regulator-name = "vcc5v0_usb_host"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en>; > - regulator-name = "vcc5v0_usb_otg"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc3v3_lcd0_n: vcc3v3-lcd0-n { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_lcd0_n"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - enable-active-high; > - gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; > - vin-supply = <&vcc3v3_sys>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc3v3_lcd0_n_en>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_lcd1_n: vcc3v3-lcd1-n { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_lcd1_n"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - enable-active-high; > - gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; > - vin-supply = <&vcc3v3_sys>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc3v3_lcd1_n_en>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > -}; > - > -&combphy0 { > - status = "okay"; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gmac0 { > - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; > - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; > - assigned-clock-rates = <0>, <125000000>; > - clock_in_out = "output"; > - phy-handle = <&rgmii_phy0>; > - phy-mode = "rgmii-id"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac0_miim > - &gmac0_tx_bus2 > - &gmac0_rx_bus2 > - &gmac0_rgmii_clk > - &gmac0_rgmii_bus>; > - status = "okay"; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; > - assigned-clock-rates = <0>, <125000000>; > - clock_in_out = "output"; > - phy-handle = <&rgmii_phy1>; > - phy-mode = "rgmii-id"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m1_miim > - &gmac1m1_tx_bus2 > - &gmac1m1_rx_bus2 > - &gmac1m1_rgmii_clk > - &gmac1m1_rgmii_bus>; > - status = "okay"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - #clock-cells = <1>; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; > - rockchip,system-power-controller; > - #sound-dai-cells = <0>; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - > - codec { > - mic-in-differential; > - }; > - }; > -}; > - > -&i2c1 { > - status = "okay"; > - > - touchscreen0: goodix@14 { > - compatible = "goodix,gt1151"; > - reg = <0x14>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; > - AVDD28-supply = <&vcc3v3_lcd0_n>; > - irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&touch_int &touch_rst>; > - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; > - VDDIO-supply = <&vcc3v3_lcd0_n>; > - }; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&i2s1_8ch { > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&mdio0 { > - rgmii_phy0: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - reset-assert-us = <20000>; > - reset-deassert-us = <100000>; > - reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; > - }; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - reset-assert-us = <20000>; > - reset-deassert-us = <100000>; > - reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; > - }; > -}; > - > -&pinctrl { > - display { > - vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en { > - rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>; > - }; > - vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en { > - rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; > - }; > - }; > - > - leds { > - led_work_en: led_work_en { > - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int: pmic_int { > - rockchip,pins = > - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - touchscreen { > - touch_int: touch_int { > - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - touch_rst: touch_rst { > - rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb { > - vcc5v0_usb_host_en: vcc5v0_usb_host_en { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - extcon = <&usb2phy0>; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-lubancat-2.dts b/arch/arm/dts/rk3568-lubancat-2.dts > deleted file mode 100644 > index a8a4cc190eb3..000000000000 > --- a/arch/arm/dts/rk3568-lubancat-2.dts > +++ /dev/null > @@ -1,730 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/* > - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. > - * Copyright (c) 2022 EmbedFire <embedfire@embedfire.com> > - */ > - > -/dts-v1/; > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3568.dtsi" > - > -/ { > - model = "EmbedFire LubanCat 2"; > - compatible = "embedfire,lubancat-2", "rockchip,rk3568"; > - > - aliases { > - ethernet0 = &gmac0; > - ethernet1 = &gmac1; > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - user_led: user-led { > - label = "user_led"; > - linux,default-trigger = "heartbeat"; > - default-state = "on"; > - gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&user_led_pin>; > - }; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - dc_5v: dc-5v-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "dc_5v"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_5v>; > - }; > - > - vcc3v3_m2_pcie: vcc3v3-m2-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "m2_pcie_3v3"; > - enable-active-high; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; > - pinctrl-0 = <&vcc3v3_m2_pcie_en>; > - pinctrl-names = "default"; > - startup-delay-us = <200000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc3v3_mini_pcie: vcc3v3-mini-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "minipcie_3v3"; > - enable-active-high; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; > - pinctrl-0 = <&vcc3v3_mini_pcie_en>; > - pinctrl-names = "default"; > - startup-delay-us = <5000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc5v0_usb20_host: vcc5v0-usb20-host-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb20_host"; > - enable-active-high; > - gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; > - pinctrl-0 = <&vcc5v0_usb20_host_en>; > - pinctrl-names = "default"; > - }; > - > - vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb30_host"; > - enable-active-high; > - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; > - pinctrl-0 = <&vcc5v0_usb30_host_en>; > - pinctrl-names = "default"; > - }; > - > - vcc5v0_otg_vbus: vcc5v0-otg-vbus-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_otg_vbus"; > - enable-active-high; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; > - pinctrl-0 = <&vcc5v0_otg_vbus_en>; > - pinctrl-names = "default"; > - }; > -}; > - > -&combphy0 { > - status = "okay"; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&combphy2 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - #clock-cells = <1>; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>; > - rockchip,system-power-controller; > - #sound-dai-cells = <0>; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-boot-on; > - regulator-always-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > -}; > - > -&i2s1_8ch { > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&gmac0 { > - phy-mode = "rgmii"; > - clock_in_out = "output"; > - > - snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - > - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; > - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac0_miim > - &gmac0_tx_bus2 > - &gmac0_rx_bus2 > - &gmac0_rgmii_clk > - &gmac0_rgmii_bus>; > - > - tx_delay = <0x22>; > - rx_delay = <0x0e>; > - > - phy-handle = <&rgmii_phy0>; > - status = "okay"; > -}; > - > -&mdio0 { > - rgmii_phy0: phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - }; > -}; > - > -&gmac1 { > - phy-mode = "rgmii"; > - clock_in_out = "output"; > - > - snps,reset-gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m1_miim > - &gmac1m1_tx_bus2 > - &gmac1m1_rx_bus2 > - &gmac1m1_rgmii_clk > - &gmac1m1_rgmii_bus>; > - > - tx_delay = <0x21>; > - rx_delay = <0x0e>; > - > - phy-handle = <&rgmii_phy1>; > - status = "okay"; > -}; > - > -&mdio1 { > - rgmii_phy1: phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - }; > -}; > - > -&gic { > - mbi-ranges = <94 31>, <229 31>, <289 31>; > -}; > - > -&pcie30phy { > - status = "okay"; > -}; > - > -&pcie3x2 { > - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_m2_pcie>; > - status = "okay"; > -}; > - > -&pcie2x1 { > - reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; > - disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_mini_pcie>; > - status = "okay"; > -}; > - > -&pmu_io_domains { > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&pwm8 { > - status = "okay"; > -}; > - > -&pwm9 { > - status = "disabled"; > -}; > - > -&pwm10 { > - status = "disabled"; > -}; > - > -&pwm14 { > - status = "disabled"; > -}; > - > -&spi3 { > - pinctrl-0 = <&spi3m1_pins>; > - status = "disabled"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&uart3 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart3m1_xfer>; > - status = "disabled"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&sdhci { > - assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>; > - assigned-clock-rates = <200000000>, <24000000>, <200000000>; > - bus-width = <8>; > - max-frequency = <200000000>; > - mmc-hs200-1_8v; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; > - supports-emmc; > - status = "okay"; > -}; > - > -&sdmmc0 { > - max-frequency = <150000000>; > - no-sdio; > - no-mmc; > - bus-width = <4>; > - cap-mmc-highspeed; > - cap-sd-highspeed; > - disable-wp; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - status = "okay"; > -}; > - > -/* USB OTG/USB Host_1 USB 2.0 Comb */ > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb30_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_otg_vbus>; > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -/* USB Host_2/USB Host_3 USB 2.0 Comb */ > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc5v0_usb20_host>; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -/* MULTI_PHY0 For SATA0, USB3.0 OTG Only USB2.0 */ > -&usb_host0_xhci { > - phys = <&usb2phy0_otg>; > - phy-names = "usb2-phy"; > - extcon = <&usb2phy0>; > - maximum-speed = "high-speed"; > - dr_mode = "host"; > - status = "okay"; > -}; > - > -&sata0 { > - status = "okay"; > -}; > - > -/* USB3.0 Host */ > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > - > -&pinctrl { > - leds { > - user_led_pin: user-status-led-pin { > - rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb { > - vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { > - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc5v0_usb30_host_en: vcc5v0-usb30-host-en { > - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc5v0_otg_vbus_en: vcc5v0-otg-vbus-en { > - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en { > - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en { > - rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int: pmic-int { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-nanopi-r5c.dts b/arch/arm/dts/rk3568-nanopi-r5c.dts > deleted file mode 100644 > index c718b8dbb9c6..000000000000 > --- a/arch/arm/dts/rk3568-nanopi-r5c.dts > +++ /dev/null > @@ -1,112 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > -/* > - * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. > - * (http://www.friendlyelec.com) > - * > - * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> > - */ > - > -/dts-v1/; > -#include "rk3568-nanopi-r5s.dtsi" > - > -/ { > - model = "FriendlyElec NanoPi R5C"; > - compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568"; > - > - gpio-keys { > - compatible = "gpio-keys"; > - pinctrl-names = "default"; > - pinctrl-0 = <&reset_button_pin>; > - > - button-reset { > - debounce-interval = <50>; > - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; > - label = "reset"; > - linux,code = <KEY_RESTART>; > - }; > - }; > - > - gpio-leds { > - compatible = "gpio-leds"; > - pinctrl-names = "default"; > - pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>; > - > - led-lan { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_LAN; > - gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; > - }; > - > - power_led: led-power { > - color = <LED_COLOR_ID_RED>; > - function = LED_FUNCTION_POWER; > - linux,default-trigger = "heartbeat"; > - gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>; > - }; > - > - led-wan { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_WAN; > - gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; > - }; > - > - led-wlan { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_WLAN; > - gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; > - }; > - }; > -}; > - > -&pcie2x1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie20_reset_pin>; > - reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; > - status = "okay"; > -}; > - > -&pcie3x1 { > - num-lanes = <1>; > - reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pcie3x2 { > - num-lanes = <1>; > - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pinctrl { > - gpio-leds { > - lan_led_pin: lan-led-pin { > - rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - power_led_pin: power-led-pin { > - rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - wan_led_pin: wan-led-pin { > - rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - wlan_led_pin: wlan-led-pin { > - rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie20_reset_pin: pcie20-reset-pin { > - rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - rockchip-key { > - reset_button_pin: reset-button-pin { > - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dts b/arch/arm/dts/rk3568-nanopi-r5s.dts > deleted file mode 100644 > index b6ad8328c7eb..000000000000 > --- a/arch/arm/dts/rk3568-nanopi-r5s.dts > +++ /dev/null > @@ -1,136 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > -/* > - * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. > - * (http://www.friendlyelec.com) > - * > - * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> > - */ > - > -/dts-v1/; > -#include "rk3568-nanopi-r5s.dtsi" > - > -/ { > - model = "FriendlyElec NanoPi R5S"; > - compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568"; > - > - aliases { > - ethernet0 = &gmac0; > - }; > - > - gpio-leds { > - compatible = "gpio-leds"; > - pinctrl-names = "default"; > - pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>; > - > - led-lan1 { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_LAN; > - function-enumerator = <1>; > - gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; > - }; > - > - led-lan2 { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_LAN; > - function-enumerator = <2>; > - gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>; > - }; > - > - power_led: led-power { > - color = <LED_COLOR_ID_RED>; > - function = LED_FUNCTION_POWER; > - linux,default-trigger = "heartbeat"; > - gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; > - }; > - > - led-wan { > - color = <LED_COLOR_ID_GREEN>; > - function = LED_FUNCTION_WAN; > - gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; > - }; > - }; > -}; > - > -&gmac0 { > - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; > - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; > - assigned-clock-rates = <0>, <125000000>; > - clock_in_out = "output"; > - phy-handle = <&rgmii_phy0>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac0_miim > - &gmac0_tx_bus2 > - &gmac0_rx_bus2 > - &gmac0_rgmii_clk > - &gmac0_rgmii_bus>; > - snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 15ms, 50ms for rtl8211f */ > - snps,reset-delays-us = <0 15000 50000>; > - tx_delay = <0x3c>; > - rx_delay = <0x2f>; > - status = "okay"; > -}; > - > -&mdio0 { > - rgmii_phy0: ethernet-phy@1 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <1>; > - pinctrl-0 = <ð_phy0_reset_pin>; > - pinctrl-names = "default"; > - }; > -}; > - > -&pcie2x1 { > - num-lanes = <1>; > - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; > - status = "okay"; > -}; > - > -&pcie30phy { > - data-lanes = <1 2>; > - status = "okay"; > -}; > - > -&pcie3x1 { > - num-lanes = <1>; > - reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pcie3x2 { > - num-lanes = <1>; > - num-ib-windows = <8>; > - num-ob-windows = <8>; > - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pinctrl { > - gmac0 { > - eth_phy0_reset_pin: eth-phy0-reset-pin { > - rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - gpio-leds { > - lan1_led_pin: lan1-led-pin { > - rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - lan2_led_pin: lan2-led-pin { > - rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - power_led_pin: power-led-pin { > - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - wan_led_pin: wan-led-pin { > - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dtsi b/arch/arm/dts/rk3568-nanopi-r5s.dtsi > deleted file mode 100644 > index 93189f830640..000000000000 > --- a/arch/arm/dts/rk3568-nanopi-r5s.dtsi > +++ /dev/null > @@ -1,587 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > -/* > - * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. > - * (http://www.friendlyelec.com) > - * > - * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> > - */ > - > -/dts-v1/; > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/input/input.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3568.dtsi" > - > -/ { > - aliases { > - mmc0 = &sdmmc0; > - mmc1 = &sdhci; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - vdd_usbc: vdd-usbc-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vdd_usbc"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vdd_usbc>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vdd_usbc>; > - }; > - > - vcc3v3_pcie: vcc3v3-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_pcie"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - enable-active-high; > - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; > - startup-delay-us = <200000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc5v0_usb: vcc5v0-usb-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vdd_usbc>; > - }; > - > - vcc5v0_usb_host: vcc5v0-usb-host-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_host_en>; > - regulator-name = "vcc5v0_usb_host"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en>; > - regulator-name = "vcc5v0_usb_otg"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - pcie30_avdd0v9: pcie30-avdd0v9-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - pcie30_avdd1v8: pcie30-avdd1v8-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc3v3_sys>; > - }; > -}; > - > -&combphy0 { > - status = "okay"; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&combphy2 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>; > - rockchip,system-power-controller; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-min-microvolt = <950000>; > - regulator-max-microvolt = <950000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - > - }; > -}; > - > -&i2c5 { > - status = "okay"; > - > - hym8563: rtc@51 { > - compatible = "haoyu,hym8563"; > - reg = <0x51>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <0>; > - clock-output-names = "rtcic_32kout"; > - pinctrl-names = "default"; > - pinctrl-0 = <&hym8563_int>; > - wakeup-source; > - }; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&pcie30phy { > - data-lanes = <1 2>; > - status = "okay"; > -}; > - > -&pinctrl { > - hym8563 { > - hym8563_int: hym8563-int { > - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - pmic { > - pmic_int: pmic-int { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - usb { > - vcc5v0_usb_host_en: vcc5v0-usb-host-en { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc5v0_usb_otg_en: vcc5v0-usb-otg-en { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - max-frequency = <150000000>; > - no-sdio; > - no-mmc; > - bus-width = <4>; > - cap-mmc-highspeed; > - cap-sd-highspeed; > - disable-wp; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - extcon = <&usb2phy0>; > - dr_mode = "host"; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-odroid-m1.dts b/arch/arm/dts/rk3568-odroid-m1.dts > deleted file mode 100644 > index a337f547caf5..000000000000 > --- a/arch/arm/dts/rk3568-odroid-m1.dts > +++ /dev/null > @@ -1,741 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2022 Hardkernel Co., Ltd. > - * > - */ > - > -/dts-v1/; > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3568.dtsi" > - > -/ { > - model = "Hardkernel ODROID-M1"; > - compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568"; > - > - aliases { > - ethernet0 = &gmac0; > - i2c0 = &i2c3; > - i2c3 = &i2c0; > - mmc0 = &sdhci; > - mmc1 = &sdmmc0; > - serial0 = &uart1; > - serial1 = &uart0; > - }; > - > - chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - dc_12v: dc-12v-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "dc_12v"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - ir-receiver { > - compatible = "gpio-ir-receiver"; > - gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&ir_receiver_pin>; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led_power: led-0 { > - gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; > - function = LED_FUNCTION_POWER; > - color = <LED_COLOR_ID_RED>; > - default-state = "keep"; > - linux,default-trigger = "default-on"; > - pinctrl-names = "default"; > - pinctrl-0 = <&led_power_pin>; > - }; > - led_work: led-1 { > - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > - function = LED_FUNCTION_HEARTBEAT; > - color = <LED_COLOR_ID_BLUE>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&led_work_pin>; > - }; > - }; > - > - rk809-sound { > - compatible = "simple-audio-card"; > - pinctrl-names = "default"; > - pinctrl-0 = <&hp_det_pin>; > - simple-audio-card,name = "Analog RK817"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; > - simple-audio-card,mclk-fs = <256>; > - simple-audio-card,widgets = > - "Headphone", "Headphones", > - "Speaker", "Speaker"; > - simple-audio-card,routing = > - "Headphones", "HPOL", > - "Headphones", "HPOR", > - "Speaker", "SPKO"; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s1_8ch>; > - }; > - > - simple-audio-card,codec { > - sound-dai = <&rk809>; > - }; > - }; > - > - vcc3v3_pcie: vcc3v3-pcie-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_pcie"; > - enable-active-high; > - gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc3v3_pcie_en_pin>; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - startup-delay-us = <5000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_usb_host: vcc5v0-usb-host-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb_host"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_host_en_pin>; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb_otg"; > - enable-active-high; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en_pin>; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_sys>; > - }; > -}; > - > -&combphy0 { > - /* Used for USB3 */ > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&combphy1 { > - /* Used for USB3 */ > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&combphy2 { > - /* used for SATA */ > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gmac0 { > - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; > - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; > - assigned-clock-rates = <0>, <125000000>; > - clock_in_out = "output"; > - phy-handle = <&rgmii_phy0>; > - phy-mode = "rgmii"; > - phy-supply = <&vcc3v3_sys>; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac0_miim > - &gmac0_tx_bus2 > - &gmac0_rx_bus2 > - &gmac0_rgmii_clk > - &gmac0_rgmii_bus>; > - status = "okay"; > - > - tx_delay = <0x4f>; > - rx_delay = <0x2d>; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc3v3_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - #clock-cells = <1>; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; > - rockchip,system-power-controller; > - #sound-dai-cells = <0>; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-always-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-always-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&i2s1_8ch { > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&mdio0 { > - rgmii_phy0: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - reset-assert-us = <20000>; > - reset-deassert-us = <100000>; > - reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > - }; > -}; > - > -&pcie30phy { > - status = "okay"; > -}; > - > -&pcie3x2 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_reset_pin>; > - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pinctrl { > - fspi { > - fspi_dual_io_pins: fspi-dual-io-pins { > - rockchip,pins = > - /* fspi_clk */ > - <1 RK_PD0 1 &pcfg_pull_none>, > - /* fspi_cs0n */ > - <1 RK_PD3 1 &pcfg_pull_none>, > - /* fspi_d0 */ > - <1 RK_PD1 1 &pcfg_pull_none>, > - /* fspi_d1 */ > - <1 RK_PD2 1 &pcfg_pull_none>; > - }; > - }; > - > - ir-receiver { > - ir_receiver_pin: ir-receiver-pin { > - /* external pullup to VCC3V3_SYS */ > - rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - leds { > - led_power_pin: led-power-pin { > - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - led_work_pin: led-work-pin { > - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie_reset_pin: pcie-reset-pin { > - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin { > - rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - rk809 { > - hp_det_pin: hp-det-pin { > - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb { > - vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_3v3>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sata2 { > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr50; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&sfc { > - /* Dual I/O mode as the D2 pin conflicts with the eMMC */ > - pinctrl-0 = <&fspi_dual_io_pins>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "okay"; > - > - flash@0 { > - compatible = "jedec,spi-nor"; > - reg = <0>; > - spi-max-frequency = <100000000>; > - spi-rx-bus-width = <2>; > - spi-tx-bus-width = <1>; > - > - partitions { > - compatible = "fixed-partitions"; > - #address-cells = <1>; > - #size-cells = <1>; > - > - partition@0 { > - label = "SPL"; > - reg = <0x0 0xe0000>; > - }; > - partition@e0000 { > - label = "U-Boot Env"; > - reg = <0xe0000 0x20000>; > - }; > - partition@100000 { > - label = "U-Boot"; > - reg = <0x100000 0x200000>; > - }; > - partition@300000 { > - label = "splash"; > - reg = <0x300000 0x100000>; > - }; > - partition@400000 { > - label = "Filesystem"; > - reg = <0x400000 0xc00000>; > - }; > - }; > - }; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - dr_mode = "host"; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3568-pinctrl.dtsi b/arch/arm/dts/rk3568-pinctrl.dtsi > deleted file mode 100644 > index 0a979bfb63d9..000000000000 > --- a/arch/arm/dts/rk3568-pinctrl.dtsi > +++ /dev/null > @@ -1,3214 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. > - */ > - > -#include <dt-bindings/pinctrl/rockchip.h> > -#include "rockchip-pinconf.dtsi" > - > -/* > - * This file is auto generated by pin2dts tool, please keep these code > - * by adding changes at end of this file. > - */ > -&pinctrl { > - acodec { > - /omit-if-no-ref/ > - acodec_pins: acodec-pins { > - rockchip,pins = > - /* acodec_adc_sync */ > - <1 RK_PB1 5 &pcfg_pull_none>, > - /* acodec_adcclk */ > - <1 RK_PA1 5 &pcfg_pull_none>, > - /* acodec_adcdata */ > - <1 RK_PA0 5 &pcfg_pull_none>, > - /* acodec_dac_datal */ > - <1 RK_PA7 5 &pcfg_pull_none>, > - /* acodec_dac_datar */ > - <1 RK_PB0 5 &pcfg_pull_none>, > - /* acodec_dacclk */ > - <1 RK_PA3 5 &pcfg_pull_none>, > - /* acodec_dacsync */ > - <1 RK_PA5 5 &pcfg_pull_none>; > - }; > - }; > - > - audiopwm { > - /omit-if-no-ref/ > - audiopwm_lout: audiopwm-lout { > - rockchip,pins = > - /* audiopwm_lout */ > - <1 RK_PA0 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - audiopwm_loutn: audiopwm-loutn { > - rockchip,pins = > - /* audiopwm_loutn */ > - <1 RK_PA1 6 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - audiopwm_loutp: audiopwm-loutp { > - rockchip,pins = > - /* audiopwm_loutp */ > - <1 RK_PA0 6 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - audiopwm_rout: audiopwm-rout { > - rockchip,pins = > - /* audiopwm_rout */ > - <1 RK_PA1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - audiopwm_routn: audiopwm-routn { > - rockchip,pins = > - /* audiopwm_routn */ > - <1 RK_PA7 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - audiopwm_routp: audiopwm-routp { > - rockchip,pins = > - /* audiopwm_routp */ > - <1 RK_PA6 4 &pcfg_pull_none>; > - }; > - }; > - > - bt656 { > - /omit-if-no-ref/ > - bt656m0_pins: bt656m0-pins { > - rockchip,pins = > - /* bt656_clkm0 */ > - <3 RK_PA0 2 &pcfg_pull_none>, > - /* bt656_d0m0 */ > - <2 RK_PD0 2 &pcfg_pull_none>, > - /* bt656_d1m0 */ > - <2 RK_PD1 2 &pcfg_pull_none>, > - /* bt656_d2m0 */ > - <2 RK_PD2 2 &pcfg_pull_none>, > - /* bt656_d3m0 */ > - <2 RK_PD3 2 &pcfg_pull_none>, > - /* bt656_d4m0 */ > - <2 RK_PD4 2 &pcfg_pull_none>, > - /* bt656_d5m0 */ > - <2 RK_PD5 2 &pcfg_pull_none>, > - /* bt656_d6m0 */ > - <2 RK_PD6 2 &pcfg_pull_none>, > - /* bt656_d7m0 */ > - <2 RK_PD7 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - bt656m1_pins: bt656m1-pins { > - rockchip,pins = > - /* bt656_clkm1 */ > - <4 RK_PB4 5 &pcfg_pull_none>, > - /* bt656_d0m1 */ > - <3 RK_PC6 5 &pcfg_pull_none>, > - /* bt656_d1m1 */ > - <3 RK_PC7 5 &pcfg_pull_none>, > - /* bt656_d2m1 */ > - <3 RK_PD0 5 &pcfg_pull_none>, > - /* bt656_d3m1 */ > - <3 RK_PD1 5 &pcfg_pull_none>, > - /* bt656_d4m1 */ > - <3 RK_PD2 5 &pcfg_pull_none>, > - /* bt656_d5m1 */ > - <3 RK_PD3 5 &pcfg_pull_none>, > - /* bt656_d6m1 */ > - <3 RK_PD4 5 &pcfg_pull_none>, > - /* bt656_d7m1 */ > - <3 RK_PD5 5 &pcfg_pull_none>; > - }; > - }; > - > - bt1120 { > - /omit-if-no-ref/ > - bt1120_pins: bt1120-pins { > - rockchip,pins = > - /* bt1120_clk */ > - <3 RK_PA6 2 &pcfg_pull_none>, > - /* bt1120_d0 */ > - <3 RK_PA1 2 &pcfg_pull_none>, > - /* bt1120_d1 */ > - <3 RK_PA2 2 &pcfg_pull_none>, > - /* bt1120_d2 */ > - <3 RK_PA3 2 &pcfg_pull_none>, > - /* bt1120_d3 */ > - <3 RK_PA4 2 &pcfg_pull_none>, > - /* bt1120_d4 */ > - <3 RK_PA5 2 &pcfg_pull_none>, > - /* bt1120_d5 */ > - <3 RK_PA7 2 &pcfg_pull_none>, > - /* bt1120_d6 */ > - <3 RK_PB0 2 &pcfg_pull_none>, > - /* bt1120_d7 */ > - <3 RK_PB1 2 &pcfg_pull_none>, > - /* bt1120_d8 */ > - <3 RK_PB2 2 &pcfg_pull_none>, > - /* bt1120_d9 */ > - <3 RK_PB3 2 &pcfg_pull_none>, > - /* bt1120_d10 */ > - <3 RK_PB4 2 &pcfg_pull_none>, > - /* bt1120_d11 */ > - <3 RK_PB5 2 &pcfg_pull_none>, > - /* bt1120_d12 */ > - <3 RK_PB6 2 &pcfg_pull_none>, > - /* bt1120_d13 */ > - <3 RK_PC1 2 &pcfg_pull_none>, > - /* bt1120_d14 */ > - <3 RK_PC2 2 &pcfg_pull_none>, > - /* bt1120_d15 */ > - <3 RK_PC3 2 &pcfg_pull_none>; > - }; > - }; > - > - cam { > - /omit-if-no-ref/ > - cam_clkout0: cam-clkout0 { > - rockchip,pins = > - /* cam_clkout0 */ > - <4 RK_PA7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - cam_clkout1: cam-clkout1 { > - rockchip,pins = > - /* cam_clkout1 */ > - <4 RK_PB0 1 &pcfg_pull_none>; > - }; > - }; > - > - can0 { > - /omit-if-no-ref/ > - can0m0_pins: can0m0-pins { > - rockchip,pins = > - /* can0_rxm0 */ > - <0 RK_PB4 2 &pcfg_pull_none>, > - /* can0_txm0 */ > - <0 RK_PB3 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - can0m1_pins: can0m1-pins { > - rockchip,pins = > - /* can0_rxm1 */ > - <2 RK_PA2 4 &pcfg_pull_none>, > - /* can0_txm1 */ > - <2 RK_PA1 4 &pcfg_pull_none>; > - }; > - }; > - > - can1 { > - /omit-if-no-ref/ > - can1m0_pins: can1m0-pins { > - rockchip,pins = > - /* can1_rxm0 */ > - <1 RK_PA0 3 &pcfg_pull_none>, > - /* can1_txm0 */ > - <1 RK_PA1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - can1m1_pins: can1m1-pins { > - rockchip,pins = > - /* can1_rxm1 */ > - <4 RK_PC2 3 &pcfg_pull_none>, > - /* can1_txm1 */ > - <4 RK_PC3 3 &pcfg_pull_none>; > - }; > - }; > - > - can2 { > - /omit-if-no-ref/ > - can2m0_pins: can2m0-pins { > - rockchip,pins = > - /* can2_rxm0 */ > - <4 RK_PB4 3 &pcfg_pull_none>, > - /* can2_txm0 */ > - <4 RK_PB5 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - can2m1_pins: can2m1-pins { > - rockchip,pins = > - /* can2_rxm1 */ > - <2 RK_PB1 4 &pcfg_pull_none>, > - /* can2_txm1 */ > - <2 RK_PB2 4 &pcfg_pull_none>; > - }; > - }; > - > - cif { > - /omit-if-no-ref/ > - cif_clk: cif-clk { > - rockchip,pins = > - /* cif_clkout */ > - <4 RK_PC0 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - cif_dvp_clk: cif-dvp-clk { > - rockchip,pins = > - /* cif_clkin */ > - <4 RK_PC1 1 &pcfg_pull_none>, > - /* cif_href */ > - <4 RK_PB6 1 &pcfg_pull_none>, > - /* cif_vsync */ > - <4 RK_PB7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - cif_dvp_bus16: cif-dvp-bus16 { > - rockchip,pins = > - /* cif_d8 */ > - <3 RK_PD6 1 &pcfg_pull_none>, > - /* cif_d9 */ > - <3 RK_PD7 1 &pcfg_pull_none>, > - /* cif_d10 */ > - <4 RK_PA0 1 &pcfg_pull_none>, > - /* cif_d11 */ > - <4 RK_PA1 1 &pcfg_pull_none>, > - /* cif_d12 */ > - <4 RK_PA2 1 &pcfg_pull_none>, > - /* cif_d13 */ > - <4 RK_PA3 1 &pcfg_pull_none>, > - /* cif_d14 */ > - <4 RK_PA4 1 &pcfg_pull_none>, > - /* cif_d15 */ > - <4 RK_PA5 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - cif_dvp_bus8: cif-dvp-bus8 { > - rockchip,pins = > - /* cif_d0 */ > - <3 RK_PC6 1 &pcfg_pull_none>, > - /* cif_d1 */ > - <3 RK_PC7 1 &pcfg_pull_none>, > - /* cif_d2 */ > - <3 RK_PD0 1 &pcfg_pull_none>, > - /* cif_d3 */ > - <3 RK_PD1 1 &pcfg_pull_none>, > - /* cif_d4 */ > - <3 RK_PD2 1 &pcfg_pull_none>, > - /* cif_d5 */ > - <3 RK_PD3 1 &pcfg_pull_none>, > - /* cif_d6 */ > - <3 RK_PD4 1 &pcfg_pull_none>, > - /* cif_d7 */ > - <3 RK_PD5 1 &pcfg_pull_none>; > - }; > - }; > - > - clk32k { > - /omit-if-no-ref/ > - clk32k_in: clk32k-in { > - rockchip,pins = > - /* clk32k_in */ > - <0 RK_PB0 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - clk32k_out0: clk32k-out0 { > - rockchip,pins = > - /* clk32k_out0 */ > - <0 RK_PB0 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - clk32k_out1: clk32k-out1 { > - rockchip,pins = > - /* clk32k_out1 */ > - <2 RK_PC6 1 &pcfg_pull_none>; > - }; > - }; > - > - cpu { > - /omit-if-no-ref/ > - cpu_pins: cpu-pins { > - rockchip,pins = > - /* cpu_avs */ > - <0 RK_PB7 2 &pcfg_pull_none>; > - }; > - }; > - > - ebc { > - /omit-if-no-ref/ > - ebc_extern: ebc-extern { > - rockchip,pins = > - /* ebc_sdce1 */ > - <4 RK_PA7 2 &pcfg_pull_none>, > - /* ebc_sdce2 */ > - <4 RK_PB0 2 &pcfg_pull_none>, > - /* ebc_sdce3 */ > - <4 RK_PB1 2 &pcfg_pull_none>, > - /* ebc_sdshr */ > - <4 RK_PB5 2 &pcfg_pull_none>, > - /* ebc_vcom */ > - <4 RK_PB2 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - ebc_pins: ebc-pins { > - rockchip,pins = > - /* ebc_gdclk */ > - <4 RK_PC0 2 &pcfg_pull_none>, > - /* ebc_gdoe */ > - <4 RK_PB3 2 &pcfg_pull_none>, > - /* ebc_gdsp */ > - <4 RK_PB4 2 &pcfg_pull_none>, > - /* ebc_sdce0 */ > - <4 RK_PA6 2 &pcfg_pull_none>, > - /* ebc_sdclk */ > - <4 RK_PC1 2 &pcfg_pull_none>, > - /* ebc_sddo0 */ > - <3 RK_PC6 2 &pcfg_pull_none>, > - /* ebc_sddo1 */ > - <3 RK_PC7 2 &pcfg_pull_none>, > - /* ebc_sddo2 */ > - <3 RK_PD0 2 &pcfg_pull_none>, > - /* ebc_sddo3 */ > - <3 RK_PD1 2 &pcfg_pull_none>, > - /* ebc_sddo4 */ > - <3 RK_PD2 2 &pcfg_pull_none>, > - /* ebc_sddo5 */ > - <3 RK_PD3 2 &pcfg_pull_none>, > - /* ebc_sddo6 */ > - <3 RK_PD4 2 &pcfg_pull_none>, > - /* ebc_sddo7 */ > - <3 RK_PD5 2 &pcfg_pull_none>, > - /* ebc_sddo8 */ > - <3 RK_PD6 2 &pcfg_pull_none>, > - /* ebc_sddo9 */ > - <3 RK_PD7 2 &pcfg_pull_none>, > - /* ebc_sddo10 */ > - <4 RK_PA0 2 &pcfg_pull_none>, > - /* ebc_sddo11 */ > - <4 RK_PA1 2 &pcfg_pull_none>, > - /* ebc_sddo12 */ > - <4 RK_PA2 2 &pcfg_pull_none>, > - /* ebc_sddo13 */ > - <4 RK_PA3 2 &pcfg_pull_none>, > - /* ebc_sddo14 */ > - <4 RK_PA4 2 &pcfg_pull_none>, > - /* ebc_sddo15 */ > - <4 RK_PA5 2 &pcfg_pull_none>, > - /* ebc_sdle */ > - <4 RK_PB6 2 &pcfg_pull_none>, > - /* ebc_sdoe */ > - <4 RK_PB7 2 &pcfg_pull_none>; > - }; > - }; > - > - edpdp { > - /omit-if-no-ref/ > - edpdpm0_pins: edpdpm0-pins { > - rockchip,pins = > - /* edpdp_hpdinm0 */ > - <4 RK_PC4 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - edpdpm1_pins: edpdpm1-pins { > - rockchip,pins = > - /* edpdp_hpdinm1 */ > - <0 RK_PC2 2 &pcfg_pull_none>; > - }; > - }; > - > - emmc { > - /omit-if-no-ref/ > - emmc_rstnout: emmc-rstnout { > - rockchip,pins = > - /* emmc_rstn */ > - <1 RK_PC7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - emmc_bus8: emmc-bus8 { > - rockchip,pins = > - /* emmc_d0 */ > - <1 RK_PB4 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d1 */ > - <1 RK_PB5 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d2 */ > - <1 RK_PB6 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d3 */ > - <1 RK_PB7 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d4 */ > - <1 RK_PC0 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d5 */ > - <1 RK_PC1 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d6 */ > - <1 RK_PC2 1 &pcfg_pull_up_drv_level_2>, > - /* emmc_d7 */ > - <1 RK_PC3 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - emmc_clk: emmc-clk { > - rockchip,pins = > - /* emmc_clkout */ > - <1 RK_PC5 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - emmc_cmd: emmc-cmd { > - rockchip,pins = > - /* emmc_cmd */ > - <1 RK_PC4 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - emmc_datastrobe: emmc-datastrobe { > - rockchip,pins = > - /* emmc_datastrobe */ > - <1 RK_PC6 1 &pcfg_pull_none>; > - }; > - }; > - > - eth0 { > - /omit-if-no-ref/ > - eth0_pins: eth0-pins { > - rockchip,pins = > - /* eth0_refclko25m */ > - <2 RK_PC1 2 &pcfg_pull_none>; > - }; > - }; > - > - eth1 { > - /omit-if-no-ref/ > - eth1m0_pins: eth1m0-pins { > - rockchip,pins = > - /* eth1_refclko25mm0 */ > - <3 RK_PB0 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - eth1m1_pins: eth1m1-pins { > - rockchip,pins = > - /* eth1_refclko25mm1 */ > - <4 RK_PB3 3 &pcfg_pull_none>; > - }; > - }; > - > - flash { > - /omit-if-no-ref/ > - flash_pins: flash-pins { > - rockchip,pins = > - /* flash_ale */ > - <1 RK_PD0 2 &pcfg_pull_none>, > - /* flash_cle */ > - <1 RK_PC6 3 &pcfg_pull_none>, > - /* flash_cs0n */ > - <1 RK_PD3 2 &pcfg_pull_none>, > - /* flash_cs1n */ > - <1 RK_PD4 2 &pcfg_pull_none>, > - /* flash_d0 */ > - <1 RK_PB4 2 &pcfg_pull_none>, > - /* flash_d1 */ > - <1 RK_PB5 2 &pcfg_pull_none>, > - /* flash_d2 */ > - <1 RK_PB6 2 &pcfg_pull_none>, > - /* flash_d3 */ > - <1 RK_PB7 2 &pcfg_pull_none>, > - /* flash_d4 */ > - <1 RK_PC0 2 &pcfg_pull_none>, > - /* flash_d5 */ > - <1 RK_PC1 2 &pcfg_pull_none>, > - /* flash_d6 */ > - <1 RK_PC2 2 &pcfg_pull_none>, > - /* flash_d7 */ > - <1 RK_PC3 2 &pcfg_pull_none>, > - /* flash_dqs */ > - <1 RK_PC5 2 &pcfg_pull_none>, > - /* flash_rdn */ > - <1 RK_PD2 2 &pcfg_pull_none>, > - /* flash_rdy */ > - <1 RK_PD1 2 &pcfg_pull_none>, > - /* flash_volsel */ > - <0 RK_PA7 1 &pcfg_pull_none>, > - /* flash_wpn */ > - <1 RK_PC7 3 &pcfg_pull_none>, > - /* flash_wrn */ > - <1 RK_PC4 2 &pcfg_pull_none>; > - }; > - }; > - > - fspi { > - /omit-if-no-ref/ > - fspi_pins: fspi-pins { > - rockchip,pins = > - /* fspi_clk */ > - <1 RK_PD0 1 &pcfg_pull_none>, > - /* fspi_cs0n */ > - <1 RK_PD3 1 &pcfg_pull_none>, > - /* fspi_d0 */ > - <1 RK_PD1 1 &pcfg_pull_none>, > - /* fspi_d1 */ > - <1 RK_PD2 1 &pcfg_pull_none>, > - /* fspi_d2 */ > - <1 RK_PC7 2 &pcfg_pull_none>, > - /* fspi_d3 */ > - <1 RK_PD4 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - fspi_cs1: fspi-cs1 { > - rockchip,pins = > - /* fspi_cs1n */ > - <1 RK_PC6 2 &pcfg_pull_up>; > - }; > - }; > - > - gmac0 { > - /omit-if-no-ref/ > - gmac0_miim: gmac0-miim { > - rockchip,pins = > - /* gmac0_mdc */ > - <2 RK_PC3 2 &pcfg_pull_none>, > - /* gmac0_mdio */ > - <2 RK_PC4 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac0_clkinout: gmac0-clkinout { > - rockchip,pins = > - /* gmac0_mclkinout */ > - <2 RK_PC2 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac0_rx_er: gmac0-rx-er { > - rockchip,pins = > - /* gmac0_rxer */ > - <2 RK_PC5 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac0_rx_bus2: gmac0-rx-bus2 { > - rockchip,pins = > - /* gmac0_rxd0 */ > - <2 RK_PB6 1 &pcfg_pull_none>, > - /* gmac0_rxd1 */ > - <2 RK_PB7 2 &pcfg_pull_none>, > - /* gmac0_rxdvcrs */ > - <2 RK_PC0 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac0_tx_bus2: gmac0-tx-bus2 { > - rockchip,pins = > - /* gmac0_txd0 */ > - <2 RK_PB3 1 &pcfg_pull_none_drv_level_2>, > - /* gmac0_txd1 */ > - <2 RK_PB4 1 &pcfg_pull_none_drv_level_2>, > - /* gmac0_txen */ > - <2 RK_PB5 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac0_rgmii_clk: gmac0-rgmii-clk { > - rockchip,pins = > - /* gmac0_rxclk */ > - <2 RK_PA5 2 &pcfg_pull_none>, > - /* gmac0_txclk */ > - <2 RK_PB0 2 &pcfg_pull_none_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - gmac0_rgmii_bus: gmac0-rgmii-bus { > - rockchip,pins = > - /* gmac0_rxd2 */ > - <2 RK_PA3 2 &pcfg_pull_none>, > - /* gmac0_rxd3 */ > - <2 RK_PA4 2 &pcfg_pull_none>, > - /* gmac0_txd2 */ > - <2 RK_PA6 2 &pcfg_pull_none_drv_level_2>, > - /* gmac0_txd3 */ > - <2 RK_PA7 2 &pcfg_pull_none_drv_level_2>; > - }; > - }; > - > - gmac1 { > - /omit-if-no-ref/ > - gmac1m0_miim: gmac1m0-miim { > - rockchip,pins = > - /* gmac1_mdcm0 */ > - <3 RK_PC4 3 &pcfg_pull_none>, > - /* gmac1_mdiom0 */ > - <3 RK_PC5 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_clkinout: gmac1m0-clkinout { > - rockchip,pins = > - /* gmac1_mclkinoutm0 */ > - <3 RK_PC0 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_rx_er: gmac1m0-rx-er { > - rockchip,pins = > - /* gmac1_rxerm0 */ > - <3 RK_PB4 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_rx_bus2: gmac1m0-rx-bus2 { > - rockchip,pins = > - /* gmac1_rxd0m0 */ > - <3 RK_PB1 3 &pcfg_pull_none>, > - /* gmac1_rxd1m0 */ > - <3 RK_PB2 3 &pcfg_pull_none>, > - /* gmac1_rxdvcrsm0 */ > - <3 RK_PB3 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_tx_bus2: gmac1m0-tx-bus2 { > - rockchip,pins = > - /* gmac1_txd0m0 */ > - <3 RK_PB5 3 &pcfg_pull_none_drv_level_2>, > - /* gmac1_txd1m0 */ > - <3 RK_PB6 3 &pcfg_pull_none_drv_level_2>, > - /* gmac1_txenm0 */ > - <3 RK_PB7 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_rgmii_clk: gmac1m0-rgmii-clk { > - rockchip,pins = > - /* gmac1_rxclkm0 */ > - <3 RK_PA7 3 &pcfg_pull_none>, > - /* gmac1_txclkm0 */ > - <3 RK_PA6 3 &pcfg_pull_none_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_rgmii_bus: gmac1m0-rgmii-bus { > - rockchip,pins = > - /* gmac1_rxd2m0 */ > - <3 RK_PA4 3 &pcfg_pull_none>, > - /* gmac1_rxd3m0 */ > - <3 RK_PA5 3 &pcfg_pull_none>, > - /* gmac1_txd2m0 */ > - <3 RK_PA2 3 &pcfg_pull_none_drv_level_2>, > - /* gmac1_txd3m0 */ > - <3 RK_PA3 3 &pcfg_pull_none_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_miim: gmac1m1-miim { > - rockchip,pins = > - /* gmac1_mdcm1 */ > - <4 RK_PB6 3 &pcfg_pull_none>, > - /* gmac1_mdiom1 */ > - <4 RK_PB7 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_clkinout: gmac1m1-clkinout { > - rockchip,pins = > - /* gmac1_mclkinoutm1 */ > - <4 RK_PC1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_rx_er: gmac1m1-rx-er { > - rockchip,pins = > - /* gmac1_rxerm1 */ > - <4 RK_PB2 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_rx_bus2: gmac1m1-rx-bus2 { > - rockchip,pins = > - /* gmac1_rxd0m1 */ > - <4 RK_PA7 3 &pcfg_pull_none>, > - /* gmac1_rxd1m1 */ > - <4 RK_PB0 3 &pcfg_pull_none>, > - /* gmac1_rxdvcrsm1 */ > - <4 RK_PB1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_tx_bus2: gmac1m1-tx-bus2 { > - rockchip,pins = > - /* gmac1_txd0m1 */ > - <4 RK_PA4 3 &pcfg_pull_none_drv_level_2>, > - /* gmac1_txd1m1 */ > - <4 RK_PA5 3 &pcfg_pull_none_drv_level_2>, > - /* gmac1_txenm1 */ > - <4 RK_PA6 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_rgmii_clk: gmac1m1-rgmii-clk { > - rockchip,pins = > - /* gmac1_rxclkm1 */ > - <4 RK_PA3 3 &pcfg_pull_none>, > - /* gmac1_txclkm1 */ > - <4 RK_PA0 3 &pcfg_pull_none_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_rgmii_bus: gmac1m1-rgmii-bus { > - rockchip,pins = > - /* gmac1_rxd2m1 */ > - <4 RK_PA1 3 &pcfg_pull_none>, > - /* gmac1_rxd3m1 */ > - <4 RK_PA2 3 &pcfg_pull_none>, > - /* gmac1_txd2m1 */ > - <3 RK_PD6 3 &pcfg_pull_none_drv_level_2>, > - /* gmac1_txd3m1 */ > - <3 RK_PD7 3 &pcfg_pull_none_drv_level_2>; > - }; > - }; > - > - gpu { > - /omit-if-no-ref/ > - gpu_pins: gpu-pins { > - rockchip,pins = > - /* gpu_avs */ > - <0 RK_PC0 2 &pcfg_pull_none>, > - /* gpu_pwren */ > - <0 RK_PA6 4 &pcfg_pull_none>; > - }; > - }; > - > - hdmitx { > - /omit-if-no-ref/ > - hdmitxm0_cec: hdmitxm0-cec { > - rockchip,pins = > - /* hdmitxm0_cec */ > - <4 RK_PD1 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - hdmitxm1_cec: hdmitxm1-cec { > - rockchip,pins = > - /* hdmitxm1_cec */ > - <0 RK_PC7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - hdmitx_scl: hdmitx-scl { > - rockchip,pins = > - /* hdmitx_scl */ > - <4 RK_PC7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - hdmitx_sda: hdmitx-sda { > - rockchip,pins = > - /* hdmitx_sda */ > - <4 RK_PD0 1 &pcfg_pull_none>; > - }; > - }; > - > - i2c0 { > - /omit-if-no-ref/ > - i2c0_xfer: i2c0-xfer { > - rockchip,pins = > - /* i2c0_scl */ > - <0 RK_PB1 1 &pcfg_pull_none_smt>, > - /* i2c0_sda */ > - <0 RK_PB2 1 &pcfg_pull_none_smt>; > - }; > - }; > - > - i2c1 { > - /omit-if-no-ref/ > - i2c1_xfer: i2c1-xfer { > - rockchip,pins = > - /* i2c1_scl */ > - <0 RK_PB3 1 &pcfg_pull_none_smt>, > - /* i2c1_sda */ > - <0 RK_PB4 1 &pcfg_pull_none_smt>; > - }; > - }; > - > - i2c2 { > - /omit-if-no-ref/ > - i2c2m0_xfer: i2c2m0-xfer { > - rockchip,pins = > - /* i2c2_sclm0 */ > - <0 RK_PB5 1 &pcfg_pull_none_smt>, > - /* i2c2_sdam0 */ > - <0 RK_PB6 1 &pcfg_pull_none_smt>; > - }; > - > - /omit-if-no-ref/ > - i2c2m1_xfer: i2c2m1-xfer { > - rockchip,pins = > - /* i2c2_sclm1 */ > - <4 RK_PB5 1 &pcfg_pull_none_smt>, > - /* i2c2_sdam1 */ > - <4 RK_PB4 1 &pcfg_pull_none_smt>; > - }; > - }; > - > - i2c3 { > - /omit-if-no-ref/ > - i2c3m0_xfer: i2c3m0-xfer { > - rockchip,pins = > - /* i2c3_sclm0 */ > - <1 RK_PA1 1 &pcfg_pull_none_smt>, > - /* i2c3_sdam0 */ > - <1 RK_PA0 1 &pcfg_pull_none_smt>; > - }; > - > - /omit-if-no-ref/ > - i2c3m1_xfer: i2c3m1-xfer { > - rockchip,pins = > - /* i2c3_sclm1 */ > - <3 RK_PB5 4 &pcfg_pull_none_smt>, > - /* i2c3_sdam1 */ > - <3 RK_PB6 4 &pcfg_pull_none_smt>; > - }; > - }; > - > - i2c4 { > - /omit-if-no-ref/ > - i2c4m0_xfer: i2c4m0-xfer { > - rockchip,pins = > - /* i2c4_sclm0 */ > - <4 RK_PB3 1 &pcfg_pull_none_smt>, > - /* i2c4_sdam0 */ > - <4 RK_PB2 1 &pcfg_pull_none_smt>; > - }; > - > - /omit-if-no-ref/ > - i2c4m1_xfer: i2c4m1-xfer { > - rockchip,pins = > - /* i2c4_sclm1 */ > - <2 RK_PB2 2 &pcfg_pull_none_smt>, > - /* i2c4_sdam1 */ > - <2 RK_PB1 2 &pcfg_pull_none_smt>; > - }; > - }; > - > - i2c5 { > - /omit-if-no-ref/ > - i2c5m0_xfer: i2c5m0-xfer { > - rockchip,pins = > - /* i2c5_sclm0 */ > - <3 RK_PB3 4 &pcfg_pull_none_smt>, > - /* i2c5_sdam0 */ > - <3 RK_PB4 4 &pcfg_pull_none_smt>; > - }; > - > - /omit-if-no-ref/ > - i2c5m1_xfer: i2c5m1-xfer { > - rockchip,pins = > - /* i2c5_sclm1 */ > - <4 RK_PC7 2 &pcfg_pull_none_smt>, > - /* i2c5_sdam1 */ > - <4 RK_PD0 2 &pcfg_pull_none_smt>; > - }; > - }; > - > - i2s1 { > - /omit-if-no-ref/ > - i2s1m0_lrckrx: i2s1m0-lrckrx { > - rockchip,pins = > - /* i2s1m0_lrckrx */ > - <1 RK_PA6 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_lrcktx: i2s1m0-lrcktx { > - rockchip,pins = > - /* i2s1m0_lrcktx */ > - <1 RK_PA5 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_mclk: i2s1m0-mclk { > - rockchip,pins = > - /* i2s1m0_mclk */ > - <1 RK_PA2 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sclkrx: i2s1m0-sclkrx { > - rockchip,pins = > - /* i2s1m0_sclkrx */ > - <1 RK_PA4 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sclktx: i2s1m0-sclktx { > - rockchip,pins = > - /* i2s1m0_sclktx */ > - <1 RK_PA3 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdi0: i2s1m0-sdi0 { > - rockchip,pins = > - /* i2s1m0_sdi0 */ > - <1 RK_PB3 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdi1: i2s1m0-sdi1 { > - rockchip,pins = > - /* i2s1m0_sdi1 */ > - <1 RK_PB2 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdi2: i2s1m0-sdi2 { > - rockchip,pins = > - /* i2s1m0_sdi2 */ > - <1 RK_PB1 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdi3: i2s1m0-sdi3 { > - rockchip,pins = > - /* i2s1m0_sdi3 */ > - <1 RK_PB0 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdo0: i2s1m0-sdo0 { > - rockchip,pins = > - /* i2s1m0_sdo0 */ > - <1 RK_PA7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdo1: i2s1m0-sdo1 { > - rockchip,pins = > - /* i2s1m0_sdo1 */ > - <1 RK_PB0 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdo2: i2s1m0-sdo2 { > - rockchip,pins = > - /* i2s1m0_sdo2 */ > - <1 RK_PB1 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m0_sdo3: i2s1m0-sdo3 { > - rockchip,pins = > - /* i2s1m0_sdo3 */ > - <1 RK_PB2 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_lrckrx: i2s1m1-lrckrx { > - rockchip,pins = > - /* i2s1m1_lrckrx */ > - <4 RK_PA7 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_lrcktx: i2s1m1-lrcktx { > - rockchip,pins = > - /* i2s1m1_lrcktx */ > - <3 RK_PD0 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_mclk: i2s1m1-mclk { > - rockchip,pins = > - /* i2s1m1_mclk */ > - <3 RK_PC6 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sclkrx: i2s1m1-sclkrx { > - rockchip,pins = > - /* i2s1m1_sclkrx */ > - <4 RK_PA6 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sclktx: i2s1m1-sclktx { > - rockchip,pins = > - /* i2s1m1_sclktx */ > - <3 RK_PC7 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdi0: i2s1m1-sdi0 { > - rockchip,pins = > - /* i2s1m1_sdi0 */ > - <3 RK_PD2 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdi1: i2s1m1-sdi1 { > - rockchip,pins = > - /* i2s1m1_sdi1 */ > - <3 RK_PD3 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdi2: i2s1m1-sdi2 { > - rockchip,pins = > - /* i2s1m1_sdi2 */ > - <3 RK_PD4 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdi3: i2s1m1-sdi3 { > - rockchip,pins = > - /* i2s1m1_sdi3 */ > - <3 RK_PD5 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdo0: i2s1m1-sdo0 { > - rockchip,pins = > - /* i2s1m1_sdo0 */ > - <3 RK_PD1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdo1: i2s1m1-sdo1 { > - rockchip,pins = > - /* i2s1m1_sdo1 */ > - <4 RK_PB0 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdo2: i2s1m1-sdo2 { > - rockchip,pins = > - /* i2s1m1_sdo2 */ > - <4 RK_PB1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m1_sdo3: i2s1m1-sdo3 { > - rockchip,pins = > - /* i2s1m1_sdo3 */ > - <4 RK_PB5 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_lrckrx: i2s1m2-lrckrx { > - rockchip,pins = > - /* i2s1m2_lrckrx */ > - <3 RK_PC5 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_lrcktx: i2s1m2-lrcktx { > - rockchip,pins = > - /* i2s1m2_lrcktx */ > - <2 RK_PD2 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_mclk: i2s1m2-mclk { > - rockchip,pins = > - /* i2s1m2_mclk */ > - <2 RK_PD0 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sclkrx: i2s1m2-sclkrx { > - rockchip,pins = > - /* i2s1m2_sclkrx */ > - <3 RK_PC3 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sclktx: i2s1m2-sclktx { > - rockchip,pins = > - /* i2s1m2_sclktx */ > - <2 RK_PD1 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdi0: i2s1m2-sdi0 { > - rockchip,pins = > - /* i2s1m2_sdi0 */ > - <2 RK_PD3 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdi1: i2s1m2-sdi1 { > - rockchip,pins = > - /* i2s1m2_sdi1 */ > - <2 RK_PD4 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdi2: i2s1m2-sdi2 { > - rockchip,pins = > - /* i2s1m2_sdi2 */ > - <2 RK_PD5 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdi3: i2s1m2-sdi3 { > - rockchip,pins = > - /* i2s1m2_sdi3 */ > - <2 RK_PD6 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdo0: i2s1m2-sdo0 { > - rockchip,pins = > - /* i2s1m2_sdo0 */ > - <2 RK_PD7 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdo1: i2s1m2-sdo1 { > - rockchip,pins = > - /* i2s1m2_sdo1 */ > - <3 RK_PA0 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdo2: i2s1m2-sdo2 { > - rockchip,pins = > - /* i2s1m2_sdo2 */ > - <3 RK_PC1 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s1m2_sdo3: i2s1m2-sdo3 { > - rockchip,pins = > - /* i2s1m2_sdo3 */ > - <3 RK_PC2 5 &pcfg_pull_none>; > - }; > - }; > - > - i2s2 { > - /omit-if-no-ref/ > - i2s2m0_lrckrx: i2s2m0-lrckrx { > - rockchip,pins = > - /* i2s2m0_lrckrx */ > - <2 RK_PC0 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m0_lrcktx: i2s2m0-lrcktx { > - rockchip,pins = > - /* i2s2m0_lrcktx */ > - <2 RK_PC3 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m0_mclk: i2s2m0-mclk { > - rockchip,pins = > - /* i2s2m0_mclk */ > - <2 RK_PC1 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m0_sclkrx: i2s2m0-sclkrx { > - rockchip,pins = > - /* i2s2m0_sclkrx */ > - <2 RK_PB7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m0_sclktx: i2s2m0-sclktx { > - rockchip,pins = > - /* i2s2m0_sclktx */ > - <2 RK_PC2 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m0_sdi: i2s2m0-sdi { > - rockchip,pins = > - /* i2s2m0_sdi */ > - <2 RK_PC5 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m0_sdo: i2s2m0-sdo { > - rockchip,pins = > - /* i2s2m0_sdo */ > - <2 RK_PC4 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_lrckrx: i2s2m1-lrckrx { > - rockchip,pins = > - /* i2s2m1_lrckrx */ > - <4 RK_PA5 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_lrcktx: i2s2m1-lrcktx { > - rockchip,pins = > - /* i2s2m1_lrcktx */ > - <4 RK_PA4 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_mclk: i2s2m1-mclk { > - rockchip,pins = > - /* i2s2m1_mclk */ > - <4 RK_PB6 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_sclkrx: i2s2m1-sclkrx { > - rockchip,pins = > - /* i2s2m1_sclkrx */ > - <4 RK_PC1 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_sclktx: i2s2m1-sclktx { > - rockchip,pins = > - /* i2s2m1_sclktx */ > - <4 RK_PB7 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_sdi: i2s2m1-sdi { > - rockchip,pins = > - /* i2s2m1_sdi */ > - <4 RK_PB2 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s2m1_sdo: i2s2m1-sdo { > - rockchip,pins = > - /* i2s2m1_sdo */ > - <4 RK_PB3 5 &pcfg_pull_none>; > - }; > - }; > - > - i2s3 { > - /omit-if-no-ref/ > - i2s3m0_lrck: i2s3m0-lrck { > - rockchip,pins = > - /* i2s3m0_lrck */ > - <3 RK_PA4 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m0_mclk: i2s3m0-mclk { > - rockchip,pins = > - /* i2s3m0_mclk */ > - <3 RK_PA2 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m0_sclk: i2s3m0-sclk { > - rockchip,pins = > - /* i2s3m0_sclk */ > - <3 RK_PA3 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m0_sdi: i2s3m0-sdi { > - rockchip,pins = > - /* i2s3m0_sdi */ > - <3 RK_PA6 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m0_sdo: i2s3m0-sdo { > - rockchip,pins = > - /* i2s3m0_sdo */ > - <3 RK_PA5 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m1_lrck: i2s3m1-lrck { > - rockchip,pins = > - /* i2s3m1_lrck */ > - <4 RK_PC4 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m1_mclk: i2s3m1-mclk { > - rockchip,pins = > - /* i2s3m1_mclk */ > - <4 RK_PC2 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m1_sclk: i2s3m1-sclk { > - rockchip,pins = > - /* i2s3m1_sclk */ > - <4 RK_PC3 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m1_sdi: i2s3m1-sdi { > - rockchip,pins = > - /* i2s3m1_sdi */ > - <4 RK_PC6 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - i2s3m1_sdo: i2s3m1-sdo { > - rockchip,pins = > - /* i2s3m1_sdo */ > - <4 RK_PC5 5 &pcfg_pull_none>; > - }; > - }; > - > - isp { > - /omit-if-no-ref/ > - isp_pins: isp-pins { > - rockchip,pins = > - /* isp_flashtrigin */ > - <4 RK_PB4 4 &pcfg_pull_none>, > - /* isp_flashtrigout */ > - <4 RK_PA6 1 &pcfg_pull_none>, > - /* isp_prelighttrig */ > - <4 RK_PB1 1 &pcfg_pull_none>; > - }; > - }; > - > - jtag { > - /omit-if-no-ref/ > - jtag_pins: jtag-pins { > - rockchip,pins = > - /* jtag_tck */ > - <1 RK_PD7 2 &pcfg_pull_none>, > - /* jtag_tms */ > - <2 RK_PA0 2 &pcfg_pull_none>; > - }; > - }; > - > - lcdc { > - /omit-if-no-ref/ > - lcdc_ctl: lcdc-ctl { > - rockchip,pins = > - /* lcdc_clk */ > - <3 RK_PA0 1 &pcfg_pull_none>, > - /* lcdc_d0 */ > - <2 RK_PD0 1 &pcfg_pull_none>, > - /* lcdc_d1 */ > - <2 RK_PD1 1 &pcfg_pull_none>, > - /* lcdc_d2 */ > - <2 RK_PD2 1 &pcfg_pull_none>, > - /* lcdc_d3 */ > - <2 RK_PD3 1 &pcfg_pull_none>, > - /* lcdc_d4 */ > - <2 RK_PD4 1 &pcfg_pull_none>, > - /* lcdc_d5 */ > - <2 RK_PD5 1 &pcfg_pull_none>, > - /* lcdc_d6 */ > - <2 RK_PD6 1 &pcfg_pull_none>, > - /* lcdc_d7 */ > - <2 RK_PD7 1 &pcfg_pull_none>, > - /* lcdc_d8 */ > - <3 RK_PA1 1 &pcfg_pull_none>, > - /* lcdc_d9 */ > - <3 RK_PA2 1 &pcfg_pull_none>, > - /* lcdc_d10 */ > - <3 RK_PA3 1 &pcfg_pull_none>, > - /* lcdc_d11 */ > - <3 RK_PA4 1 &pcfg_pull_none>, > - /* lcdc_d12 */ > - <3 RK_PA5 1 &pcfg_pull_none>, > - /* lcdc_d13 */ > - <3 RK_PA6 1 &pcfg_pull_none>, > - /* lcdc_d14 */ > - <3 RK_PA7 1 &pcfg_pull_none>, > - /* lcdc_d15 */ > - <3 RK_PB0 1 &pcfg_pull_none>, > - /* lcdc_d16 */ > - <3 RK_PB1 1 &pcfg_pull_none>, > - /* lcdc_d17 */ > - <3 RK_PB2 1 &pcfg_pull_none>, > - /* lcdc_d18 */ > - <3 RK_PB3 1 &pcfg_pull_none>, > - /* lcdc_d19 */ > - <3 RK_PB4 1 &pcfg_pull_none>, > - /* lcdc_d20 */ > - <3 RK_PB5 1 &pcfg_pull_none>, > - /* lcdc_d21 */ > - <3 RK_PB6 1 &pcfg_pull_none>, > - /* lcdc_d22 */ > - <3 RK_PB7 1 &pcfg_pull_none>, > - /* lcdc_d23 */ > - <3 RK_PC0 1 &pcfg_pull_none>, > - /* lcdc_den */ > - <3 RK_PC3 1 &pcfg_pull_none>, > - /* lcdc_hsync */ > - <3 RK_PC1 1 &pcfg_pull_none>, > - /* lcdc_vsync */ > - <3 RK_PC2 1 &pcfg_pull_none>; > - }; > - }; > - > - mcu { > - /omit-if-no-ref/ > - mcu_pins: mcu-pins { > - rockchip,pins = > - /* mcu_jtagtck */ > - <0 RK_PB4 4 &pcfg_pull_none>, > - /* mcu_jtagtdi */ > - <0 RK_PC1 4 &pcfg_pull_none>, > - /* mcu_jtagtdo */ > - <0 RK_PB3 4 &pcfg_pull_none>, > - /* mcu_jtagtms */ > - <0 RK_PC2 4 &pcfg_pull_none>, > - /* mcu_jtagtrstn */ > - <0 RK_PC3 4 &pcfg_pull_none>; > - }; > - }; > - > - npu { > - /omit-if-no-ref/ > - npu_pins: npu-pins { > - rockchip,pins = > - /* npu_avs */ > - <0 RK_PC1 2 &pcfg_pull_none>; > - }; > - }; > - > - pcie20 { > - /omit-if-no-ref/ > - pcie20m0_pins: pcie20m0-pins { > - rockchip,pins = > - /* pcie20_clkreqnm0 */ > - <0 RK_PA5 3 &pcfg_pull_none>, > - /* pcie20_perstnm0 */ > - <0 RK_PB6 3 &pcfg_pull_none>, > - /* pcie20_wakenm0 */ > - <0 RK_PB5 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie20m1_pins: pcie20m1-pins { > - rockchip,pins = > - /* pcie20_clkreqnm1 */ > - <2 RK_PD0 4 &pcfg_pull_none>, > - /* pcie20_perstnm1 */ > - <3 RK_PC1 4 &pcfg_pull_none>, > - /* pcie20_wakenm1 */ > - <2 RK_PD1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie20m2_pins: pcie20m2-pins { > - rockchip,pins = > - /* pcie20_clkreqnm2 */ > - <1 RK_PB0 4 &pcfg_pull_none>, > - /* pcie20_perstnm2 */ > - <1 RK_PB2 4 &pcfg_pull_none>, > - /* pcie20_wakenm2 */ > - <1 RK_PB1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie20_buttonrstn: pcie20-buttonrstn { > - rockchip,pins = > - /* pcie20_buttonrstn */ > - <0 RK_PB4 3 &pcfg_pull_none>; > - }; > - }; > - > - pcie30x1 { > - /omit-if-no-ref/ > - pcie30x1m0_pins: pcie30x1m0-pins { > - rockchip,pins = > - /* pcie30x1_clkreqnm0 */ > - <0 RK_PA4 3 &pcfg_pull_none>, > - /* pcie30x1_perstnm0 */ > - <0 RK_PC3 3 &pcfg_pull_none>, > - /* pcie30x1_wakenm0 */ > - <0 RK_PC2 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie30x1m1_pins: pcie30x1m1-pins { > - rockchip,pins = > - /* pcie30x1_clkreqnm1 */ > - <2 RK_PD2 4 &pcfg_pull_none>, > - /* pcie30x1_perstnm1 */ > - <3 RK_PA1 4 &pcfg_pull_none>, > - /* pcie30x1_wakenm1 */ > - <2 RK_PD3 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie30x1m2_pins: pcie30x1m2-pins { > - rockchip,pins = > - /* pcie30x1_clkreqnm2 */ > - <1 RK_PA5 4 &pcfg_pull_none>, > - /* pcie30x1_perstnm2 */ > - <1 RK_PA2 4 &pcfg_pull_none>, > - /* pcie30x1_wakenm2 */ > - <1 RK_PA3 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie30x1_buttonrstn: pcie30x1-buttonrstn { > - rockchip,pins = > - /* pcie30x1_buttonrstn */ > - <0 RK_PB3 3 &pcfg_pull_none>; > - }; > - }; > - > - pcie30x2 { > - /omit-if-no-ref/ > - pcie30x2m0_pins: pcie30x2m0-pins { > - rockchip,pins = > - /* pcie30x2_clkreqnm0 */ > - <0 RK_PA6 2 &pcfg_pull_none>, > - /* pcie30x2_perstnm0 */ > - <0 RK_PC6 3 &pcfg_pull_none>, > - /* pcie30x2_wakenm0 */ > - <0 RK_PC5 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie30x2m1_pins: pcie30x2m1-pins { > - rockchip,pins = > - /* pcie30x2_clkreqnm1 */ > - <2 RK_PD4 4 &pcfg_pull_none>, > - /* pcie30x2_perstnm1 */ > - <2 RK_PD6 4 &pcfg_pull_none>, > - /* pcie30x2_wakenm1 */ > - <2 RK_PD5 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie30x2m2_pins: pcie30x2m2-pins { > - rockchip,pins = > - /* pcie30x2_clkreqnm2 */ > - <4 RK_PC2 4 &pcfg_pull_none>, > - /* pcie30x2_perstnm2 */ > - <4 RK_PC4 4 &pcfg_pull_none>, > - /* pcie30x2_wakenm2 */ > - <4 RK_PC3 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pcie30x2_buttonrstn: pcie30x2-buttonrstn { > - rockchip,pins = > - /* pcie30x2_buttonrstn */ > - <0 RK_PB0 3 &pcfg_pull_none>; > - }; > - }; > - > - pdm { > - /omit-if-no-ref/ > - pdmm0_clk: pdmm0-clk { > - rockchip,pins = > - /* pdm_clk0m0 */ > - <1 RK_PA6 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm0_clk1: pdmm0-clk1 { > - rockchip,pins = > - /* pdmm0_clk1 */ > - <1 RK_PA4 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm0_sdi0: pdmm0-sdi0 { > - rockchip,pins = > - /* pdmm0_sdi0 */ > - <1 RK_PB3 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm0_sdi1: pdmm0-sdi1 { > - rockchip,pins = > - /* pdmm0_sdi1 */ > - <1 RK_PB2 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm0_sdi2: pdmm0-sdi2 { > - rockchip,pins = > - /* pdmm0_sdi2 */ > - <1 RK_PB1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm0_sdi3: pdmm0-sdi3 { > - rockchip,pins = > - /* pdmm0_sdi3 */ > - <1 RK_PB0 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm1_clk: pdmm1-clk { > - rockchip,pins = > - /* pdm_clk0m1 */ > - <3 RK_PD6 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm1_clk1: pdmm1-clk1 { > - rockchip,pins = > - /* pdmm1_clk1 */ > - <4 RK_PA0 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm1_sdi0: pdmm1-sdi0 { > - rockchip,pins = > - /* pdmm1_sdi0 */ > - <3 RK_PD7 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm1_sdi1: pdmm1-sdi1 { > - rockchip,pins = > - /* pdmm1_sdi1 */ > - <4 RK_PA1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm1_sdi2: pdmm1-sdi2 { > - rockchip,pins = > - /* pdmm1_sdi2 */ > - <4 RK_PA2 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm1_sdi3: pdmm1-sdi3 { > - rockchip,pins = > - /* pdmm1_sdi3 */ > - <4 RK_PA3 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm2_clk1: pdmm2-clk1 { > - rockchip,pins = > - /* pdmm2_clk1 */ > - <3 RK_PC4 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm2_sdi0: pdmm2-sdi0 { > - rockchip,pins = > - /* pdmm2_sdi0 */ > - <3 RK_PB3 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm2_sdi1: pdmm2-sdi1 { > - rockchip,pins = > - /* pdmm2_sdi1 */ > - <3 RK_PB4 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm2_sdi2: pdmm2-sdi2 { > - rockchip,pins = > - /* pdmm2_sdi2 */ > - <3 RK_PB7 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pdmm2_sdi3: pdmm2-sdi3 { > - rockchip,pins = > - /* pdmm2_sdi3 */ > - <3 RK_PC0 5 &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - /omit-if-no-ref/ > - pmic_pins: pmic-pins { > - rockchip,pins = > - /* pmic_sleep */ > - <0 RK_PA2 1 &pcfg_pull_none>; > - }; > - }; > - > - pmu { > - /omit-if-no-ref/ > - pmu_pins: pmu-pins { > - rockchip,pins = > - /* pmu_debug0 */ > - <0 RK_PA5 4 &pcfg_pull_none>, > - /* pmu_debug1 */ > - <0 RK_PA6 3 &pcfg_pull_none>, > - /* pmu_debug2 */ > - <0 RK_PC4 4 &pcfg_pull_none>, > - /* pmu_debug3 */ > - <0 RK_PC5 4 &pcfg_pull_none>, > - /* pmu_debug4 */ > - <0 RK_PC6 4 &pcfg_pull_none>, > - /* pmu_debug5 */ > - <0 RK_PC7 4 &pcfg_pull_none>; > - }; > - }; > - > - pwm0 { > - /omit-if-no-ref/ > - pwm0m0_pins: pwm0m0-pins { > - rockchip,pins = > - /* pwm0_m0 */ > - <0 RK_PB7 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm0m1_pins: pwm0m1-pins { > - rockchip,pins = > - /* pwm0_m1 */ > - <0 RK_PC7 2 &pcfg_pull_none>; > - }; > - }; > - > - pwm1 { > - /omit-if-no-ref/ > - pwm1m0_pins: pwm1m0-pins { > - rockchip,pins = > - /* pwm1_m0 */ > - <0 RK_PC0 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm1m1_pins: pwm1m1-pins { > - rockchip,pins = > - /* pwm1_m1 */ > - <0 RK_PB5 4 &pcfg_pull_none>; > - }; > - }; > - > - pwm2 { > - /omit-if-no-ref/ > - pwm2m0_pins: pwm2m0-pins { > - rockchip,pins = > - /* pwm2_m0 */ > - <0 RK_PC1 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm2m1_pins: pwm2m1-pins { > - rockchip,pins = > - /* pwm2_m1 */ > - <0 RK_PB6 4 &pcfg_pull_none>; > - }; > - }; > - > - pwm3 { > - /omit-if-no-ref/ > - pwm3_pins: pwm3-pins { > - rockchip,pins = > - /* pwm3_ir */ > - <0 RK_PC2 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm4 { > - /omit-if-no-ref/ > - pwm4_pins: pwm4-pins { > - rockchip,pins = > - /* pwm4 */ > - <0 RK_PC3 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm5 { > - /omit-if-no-ref/ > - pwm5_pins: pwm5-pins { > - rockchip,pins = > - /* pwm5 */ > - <0 RK_PC4 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm6 { > - /omit-if-no-ref/ > - pwm6_pins: pwm6-pins { > - rockchip,pins = > - /* pwm6 */ > - <0 RK_PC5 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm7 { > - /omit-if-no-ref/ > - pwm7_pins: pwm7-pins { > - rockchip,pins = > - /* pwm7_ir */ > - <0 RK_PC6 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm8 { > - /omit-if-no-ref/ > - pwm8m0_pins: pwm8m0-pins { > - rockchip,pins = > - /* pwm8_m0 */ > - <3 RK_PB1 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm8m1_pins: pwm8m1-pins { > - rockchip,pins = > - /* pwm8_m1 */ > - <1 RK_PD5 4 &pcfg_pull_none>; > - }; > - }; > - > - pwm9 { > - /omit-if-no-ref/ > - pwm9m0_pins: pwm9m0-pins { > - rockchip,pins = > - /* pwm9_m0 */ > - <3 RK_PB2 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm9m1_pins: pwm9m1-pins { > - rockchip,pins = > - /* pwm9_m1 */ > - <1 RK_PD6 4 &pcfg_pull_none>; > - }; > - }; > - > - pwm10 { > - /omit-if-no-ref/ > - pwm10m0_pins: pwm10m0-pins { > - rockchip,pins = > - /* pwm10_m0 */ > - <3 RK_PB5 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm10m1_pins: pwm10m1-pins { > - rockchip,pins = > - /* pwm10_m1 */ > - <2 RK_PA1 2 &pcfg_pull_none>; > - }; > - }; > - > - pwm11 { > - /omit-if-no-ref/ > - pwm11m0_pins: pwm11m0-pins { > - rockchip,pins = > - /* pwm11_irm0 */ > - <3 RK_PB6 5 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm11m1_pins: pwm11m1-pins { > - rockchip,pins = > - /* pwm11_irm1 */ > - <4 RK_PC0 3 &pcfg_pull_none>; > - }; > - }; > - > - pwm12 { > - /omit-if-no-ref/ > - pwm12m0_pins: pwm12m0-pins { > - rockchip,pins = > - /* pwm12_m0 */ > - <3 RK_PB7 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm12m1_pins: pwm12m1-pins { > - rockchip,pins = > - /* pwm12_m1 */ > - <4 RK_PC5 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm13 { > - /omit-if-no-ref/ > - pwm13m0_pins: pwm13m0-pins { > - rockchip,pins = > - /* pwm13_m0 */ > - <3 RK_PC0 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm13m1_pins: pwm13m1-pins { > - rockchip,pins = > - /* pwm13_m1 */ > - <4 RK_PC6 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm14 { > - /omit-if-no-ref/ > - pwm14m0_pins: pwm14m0-pins { > - rockchip,pins = > - /* pwm14_m0 */ > - <3 RK_PC4 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm14m1_pins: pwm14m1-pins { > - rockchip,pins = > - /* pwm14_m1 */ > - <4 RK_PC2 1 &pcfg_pull_none>; > - }; > - }; > - > - pwm15 { > - /omit-if-no-ref/ > - pwm15m0_pins: pwm15m0-pins { > - rockchip,pins = > - /* pwm15_irm0 */ > - <3 RK_PC5 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - pwm15m1_pins: pwm15m1-pins { > - rockchip,pins = > - /* pwm15_irm1 */ > - <4 RK_PC3 1 &pcfg_pull_none>; > - }; > - }; > - > - refclk { > - /omit-if-no-ref/ > - refclk_pins: refclk-pins { > - rockchip,pins = > - /* refclk_ou */ > - <0 RK_PA0 1 &pcfg_pull_none>; > - }; > - }; > - > - sata { > - /omit-if-no-ref/ > - sata_pins: sata-pins { > - rockchip,pins = > - /* sata_cpdet */ > - <0 RK_PA4 2 &pcfg_pull_none>, > - /* sata_cppod */ > - <0 RK_PA6 1 &pcfg_pull_none>, > - /* sata_mpswitch */ > - <0 RK_PA5 2 &pcfg_pull_none>; > - }; > - }; > - > - sata0 { > - /omit-if-no-ref/ > - sata0_pins: sata0-pins { > - rockchip,pins = > - /* sata0_actled */ > - <4 RK_PC6 3 &pcfg_pull_none>; > - }; > - }; > - > - sata1 { > - /omit-if-no-ref/ > - sata1_pins: sata1-pins { > - rockchip,pins = > - /* sata1_actled */ > - <4 RK_PC5 3 &pcfg_pull_none>; > - }; > - }; > - > - sata2 { > - /omit-if-no-ref/ > - sata2_pins: sata2-pins { > - rockchip,pins = > - /* sata2_actled */ > - <4 RK_PC4 3 &pcfg_pull_none>; > - }; > - }; > - > - scr { > - /omit-if-no-ref/ > - scr_pins: scr-pins { > - rockchip,pins = > - /* scr_clk */ > - <1 RK_PA2 3 &pcfg_pull_none>, > - /* scr_det */ > - <1 RK_PA7 3 &pcfg_pull_up>, > - /* scr_io */ > - <1 RK_PA3 3 &pcfg_pull_up>, > - /* scr_rst */ > - <1 RK_PA5 3 &pcfg_pull_none>; > - }; > - }; > - > - sdmmc0 { > - /omit-if-no-ref/ > - sdmmc0_bus4: sdmmc0-bus4 { > - rockchip,pins = > - /* sdmmc0_d0 */ > - <1 RK_PD5 1 &pcfg_pull_up_drv_level_2>, > - /* sdmmc0_d1 */ > - <1 RK_PD6 1 &pcfg_pull_up_drv_level_2>, > - /* sdmmc0_d2 */ > - <1 RK_PD7 1 &pcfg_pull_up_drv_level_2>, > - /* sdmmc0_d3 */ > - <2 RK_PA0 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc0_clk: sdmmc0-clk { > - rockchip,pins = > - /* sdmmc0_clk */ > - <2 RK_PA2 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc0_cmd: sdmmc0-cmd { > - rockchip,pins = > - /* sdmmc0_cmd */ > - <2 RK_PA1 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc0_det: sdmmc0-det { > - rockchip,pins = > - /* sdmmc0_det */ > - <0 RK_PA4 1 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - sdmmc0_pwren: sdmmc0-pwren { > - rockchip,pins = > - /* sdmmc0_pwren */ > - <0 RK_PA5 1 &pcfg_pull_none>; > - }; > - }; > - > - sdmmc1 { > - /omit-if-no-ref/ > - sdmmc1_bus4: sdmmc1-bus4 { > - rockchip,pins = > - /* sdmmc1_d0 */ > - <2 RK_PA3 1 &pcfg_pull_up_drv_level_2>, > - /* sdmmc1_d1 */ > - <2 RK_PA4 1 &pcfg_pull_up_drv_level_2>, > - /* sdmmc1_d2 */ > - <2 RK_PA5 1 &pcfg_pull_up_drv_level_2>, > - /* sdmmc1_d3 */ > - <2 RK_PA6 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc1_clk: sdmmc1-clk { > - rockchip,pins = > - /* sdmmc1_clk */ > - <2 RK_PB0 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc1_cmd: sdmmc1-cmd { > - rockchip,pins = > - /* sdmmc1_cmd */ > - <2 RK_PA7 1 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc1_det: sdmmc1-det { > - rockchip,pins = > - /* sdmmc1_det */ > - <2 RK_PB2 1 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - sdmmc1_pwren: sdmmc1-pwren { > - rockchip,pins = > - /* sdmmc1_pwren */ > - <2 RK_PB1 1 &pcfg_pull_none>; > - }; > - }; > - > - sdmmc2 { > - /omit-if-no-ref/ > - sdmmc2m0_bus4: sdmmc2m0-bus4 { > - rockchip,pins = > - /* sdmmc2_d0m0 */ > - <3 RK_PC6 3 &pcfg_pull_up_drv_level_2>, > - /* sdmmc2_d1m0 */ > - <3 RK_PC7 3 &pcfg_pull_up_drv_level_2>, > - /* sdmmc2_d2m0 */ > - <3 RK_PD0 3 &pcfg_pull_up_drv_level_2>, > - /* sdmmc2_d3m0 */ > - <3 RK_PD1 3 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m0_clk: sdmmc2m0-clk { > - rockchip,pins = > - /* sdmmc2_clkm0 */ > - <3 RK_PD3 3 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m0_cmd: sdmmc2m0-cmd { > - rockchip,pins = > - /* sdmmc2_cmdm0 */ > - <3 RK_PD2 3 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m0_det: sdmmc2m0-det { > - rockchip,pins = > - /* sdmmc2_detm0 */ > - <3 RK_PD4 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m0_pwren: sdmmc2m0-pwren { > - rockchip,pins = > - /* sdmmc2m0_pwren */ > - <3 RK_PD5 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m1_bus4: sdmmc2m1-bus4 { > - rockchip,pins = > - /* sdmmc2_d0m1 */ > - <3 RK_PA1 5 &pcfg_pull_up_drv_level_2>, > - /* sdmmc2_d1m1 */ > - <3 RK_PA2 5 &pcfg_pull_up_drv_level_2>, > - /* sdmmc2_d2m1 */ > - <3 RK_PA3 5 &pcfg_pull_up_drv_level_2>, > - /* sdmmc2_d3m1 */ > - <3 RK_PA4 5 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m1_clk: sdmmc2m1-clk { > - rockchip,pins = > - /* sdmmc2_clkm1 */ > - <3 RK_PA6 5 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m1_cmd: sdmmc2m1-cmd { > - rockchip,pins = > - /* sdmmc2_cmdm1 */ > - <3 RK_PA5 5 &pcfg_pull_up_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m1_det: sdmmc2m1-det { > - rockchip,pins = > - /* sdmmc2_detm1 */ > - <3 RK_PA7 4 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - sdmmc2m1_pwren: sdmmc2m1-pwren { > - rockchip,pins = > - /* sdmmc2m1_pwren */ > - <3 RK_PB0 4 &pcfg_pull_none>; > - }; > - }; > - > - spdif { > - /omit-if-no-ref/ > - spdifm0_tx: spdifm0-tx { > - rockchip,pins = > - /* spdifm0_tx */ > - <1 RK_PA4 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spdifm1_tx: spdifm1-tx { > - rockchip,pins = > - /* spdifm1_tx */ > - <3 RK_PC5 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spdifm2_tx: spdifm2-tx { > - rockchip,pins = > - /* spdifm2_tx */ > - <4 RK_PC4 2 &pcfg_pull_none>; > - }; > - }; > - > - spi0 { > - /omit-if-no-ref/ > - spi0m0_pins: spi0m0-pins { > - rockchip,pins = > - /* spi0_clkm0 */ > - <0 RK_PB5 2 &pcfg_pull_none>, > - /* spi0_misom0 */ > - <0 RK_PC5 2 &pcfg_pull_none>, > - /* spi0_mosim0 */ > - <0 RK_PB6 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi0m0_cs0: spi0m0-cs0 { > - rockchip,pins = > - /* spi0_cs0m0 */ > - <0 RK_PC6 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi0m0_cs1: spi0m0-cs1 { > - rockchip,pins = > - /* spi0_cs1m0 */ > - <0 RK_PC4 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi0m1_pins: spi0m1-pins { > - rockchip,pins = > - /* spi0_clkm1 */ > - <2 RK_PD3 3 &pcfg_pull_none>, > - /* spi0_misom1 */ > - <2 RK_PD0 3 &pcfg_pull_none>, > - /* spi0_mosim1 */ > - <2 RK_PD1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi0m1_cs0: spi0m1-cs0 { > - rockchip,pins = > - /* spi0_cs0m1 */ > - <2 RK_PD2 3 &pcfg_pull_none>; > - }; > - }; > - > - spi1 { > - /omit-if-no-ref/ > - spi1m0_pins: spi1m0-pins { > - rockchip,pins = > - /* spi1_clkm0 */ > - <2 RK_PB5 3 &pcfg_pull_none>, > - /* spi1_misom0 */ > - <2 RK_PB6 3 &pcfg_pull_none>, > - /* spi1_mosim0 */ > - <2 RK_PB7 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi1m0_cs0: spi1m0-cs0 { > - rockchip,pins = > - /* spi1_cs0m0 */ > - <2 RK_PC0 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi1m0_cs1: spi1m0-cs1 { > - rockchip,pins = > - /* spi1_cs1m0 */ > - <2 RK_PC6 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi1m1_pins: spi1m1-pins { > - rockchip,pins = > - /* spi1_clkm1 */ > - <3 RK_PC3 3 &pcfg_pull_none>, > - /* spi1_misom1 */ > - <3 RK_PC2 3 &pcfg_pull_none>, > - /* spi1_mosim1 */ > - <3 RK_PC1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi1m1_cs0: spi1m1-cs0 { > - rockchip,pins = > - /* spi1_cs0m1 */ > - <3 RK_PA1 3 &pcfg_pull_none>; > - }; > - }; > - > - spi2 { > - /omit-if-no-ref/ > - spi2m0_pins: spi2m0-pins { > - rockchip,pins = > - /* spi2_clkm0 */ > - <2 RK_PC1 4 &pcfg_pull_none>, > - /* spi2_misom0 */ > - <2 RK_PC2 4 &pcfg_pull_none>, > - /* spi2_mosim0 */ > - <2 RK_PC3 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi2m0_cs0: spi2m0-cs0 { > - rockchip,pins = > - /* spi2_cs0m0 */ > - <2 RK_PC4 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi2m0_cs1: spi2m0-cs1 { > - rockchip,pins = > - /* spi2_cs1m0 */ > - <2 RK_PC5 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi2m1_pins: spi2m1-pins { > - rockchip,pins = > - /* spi2_clkm1 */ > - <3 RK_PA0 3 &pcfg_pull_none>, > - /* spi2_misom1 */ > - <2 RK_PD7 3 &pcfg_pull_none>, > - /* spi2_mosim1 */ > - <2 RK_PD6 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi2m1_cs0: spi2m1-cs0 { > - rockchip,pins = > - /* spi2_cs0m1 */ > - <2 RK_PD5 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi2m1_cs1: spi2m1-cs1 { > - rockchip,pins = > - /* spi2_cs1m1 */ > - <2 RK_PD4 3 &pcfg_pull_none>; > - }; > - }; > - > - spi3 { > - /omit-if-no-ref/ > - spi3m0_pins: spi3m0-pins { > - rockchip,pins = > - /* spi3_clkm0 */ > - <4 RK_PB3 4 &pcfg_pull_none>, > - /* spi3_misom0 */ > - <4 RK_PB0 4 &pcfg_pull_none>, > - /* spi3_mosim0 */ > - <4 RK_PB2 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi3m0_cs0: spi3m0-cs0 { > - rockchip,pins = > - /* spi3_cs0m0 */ > - <4 RK_PA6 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi3m0_cs1: spi3m0-cs1 { > - rockchip,pins = > - /* spi3_cs1m0 */ > - <4 RK_PA7 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi3m1_pins: spi3m1-pins { > - rockchip,pins = > - /* spi3_clkm1 */ > - <4 RK_PC2 2 &pcfg_pull_none>, > - /* spi3_misom1 */ > - <4 RK_PC5 2 &pcfg_pull_none>, > - /* spi3_mosim1 */ > - <4 RK_PC3 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi3m1_cs0: spi3m1-cs0 { > - rockchip,pins = > - /* spi3_cs0m1 */ > - <4 RK_PC6 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - spi3m1_cs1: spi3m1-cs1 { > - rockchip,pins = > - /* spi3_cs1m1 */ > - <4 RK_PD1 2 &pcfg_pull_none>; > - }; > - }; > - > - tsadc { > - /omit-if-no-ref/ > - tsadcm0_shut: tsadcm0-shut { > - rockchip,pins = > - /* tsadcm0_shut */ > - <0 RK_PA1 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - tsadcm1_shut: tsadcm1-shut { > - rockchip,pins = > - /* tsadcm1_shut */ > - <0 RK_PA2 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - tsadc_shutorg: tsadc-shutorg { > - rockchip,pins = > - /* tsadc_shutorg */ > - <0 RK_PA1 2 &pcfg_pull_none>; > - }; > - }; > - > - uart0 { > - /omit-if-no-ref/ > - uart0_xfer: uart0-xfer { > - rockchip,pins = > - /* uart0_rx */ > - <0 RK_PC0 3 &pcfg_pull_up>, > - /* uart0_tx */ > - <0 RK_PC1 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart0_ctsn: uart0-ctsn { > - rockchip,pins = > - /* uart0_ctsn */ > - <0 RK_PC7 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart0_rtsn: uart0-rtsn { > - rockchip,pins = > - /* uart0_rtsn */ > - <0 RK_PC4 3 &pcfg_pull_none>; > - }; > - }; > - > - uart1 { > - /omit-if-no-ref/ > - uart1m0_xfer: uart1m0-xfer { > - rockchip,pins = > - /* uart1_rxm0 */ > - <2 RK_PB3 2 &pcfg_pull_up>, > - /* uart1_txm0 */ > - <2 RK_PB4 2 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart1m0_ctsn: uart1m0-ctsn { > - rockchip,pins = > - /* uart1m0_ctsn */ > - <2 RK_PB6 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart1m0_rtsn: uart1m0-rtsn { > - rockchip,pins = > - /* uart1m0_rtsn */ > - <2 RK_PB5 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart1m1_xfer: uart1m1-xfer { > - rockchip,pins = > - /* uart1_rxm1 */ > - <3 RK_PD7 4 &pcfg_pull_up>, > - /* uart1_txm1 */ > - <3 RK_PD6 4 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart1m1_ctsn: uart1m1-ctsn { > - rockchip,pins = > - /* uart1m1_ctsn */ > - <4 RK_PC1 4 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart1m1_rtsn: uart1m1-rtsn { > - rockchip,pins = > - /* uart1m1_rtsn */ > - <4 RK_PB6 4 &pcfg_pull_none>; > - }; > - }; > - > - uart2 { > - /omit-if-no-ref/ > - uart2m0_xfer: uart2m0-xfer { > - rockchip,pins = > - /* uart2_rxm0 */ > - <0 RK_PD0 1 &pcfg_pull_up>, > - /* uart2_txm0 */ > - <0 RK_PD1 1 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart2m1_xfer: uart2m1-xfer { > - rockchip,pins = > - /* uart2_rxm1 */ > - <1 RK_PD6 2 &pcfg_pull_up>, > - /* uart2_txm1 */ > - <1 RK_PD5 2 &pcfg_pull_up>; > - }; > - }; > - > - uart3 { > - /omit-if-no-ref/ > - uart3m0_xfer: uart3m0-xfer { > - rockchip,pins = > - /* uart3_rxm0 */ > - <1 RK_PA0 2 &pcfg_pull_up>, > - /* uart3_txm0 */ > - <1 RK_PA1 2 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart3m0_ctsn: uart3m0-ctsn { > - rockchip,pins = > - /* uart3m0_ctsn */ > - <1 RK_PA3 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart3m0_rtsn: uart3m0-rtsn { > - rockchip,pins = > - /* uart3m0_rtsn */ > - <1 RK_PA2 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart3m1_xfer: uart3m1-xfer { > - rockchip,pins = > - /* uart3_rxm1 */ > - <3 RK_PC0 4 &pcfg_pull_up>, > - /* uart3_txm1 */ > - <3 RK_PB7 4 &pcfg_pull_up>; > - }; > - }; > - > - uart4 { > - /omit-if-no-ref/ > - uart4m0_xfer: uart4m0-xfer { > - rockchip,pins = > - /* uart4_rxm0 */ > - <1 RK_PA4 2 &pcfg_pull_up>, > - /* uart4_txm0 */ > - <1 RK_PA6 2 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart4m0_ctsn: uart4m0-ctsn { > - rockchip,pins = > - /* uart4m0_ctsn */ > - <1 RK_PA7 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart4m0_rtsn: uart4m0-rtsn { > - rockchip,pins = > - /* uart4m0_rtsn */ > - <1 RK_PA5 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart4m1_xfer: uart4m1-xfer { > - rockchip,pins = > - /* uart4_rxm1 */ > - <3 RK_PB1 4 &pcfg_pull_up>, > - /* uart4_txm1 */ > - <3 RK_PB2 4 &pcfg_pull_up>; > - }; > - }; > - > - uart5 { > - /omit-if-no-ref/ > - uart5m0_xfer: uart5m0-xfer { > - rockchip,pins = > - /* uart5_rxm0 */ > - <2 RK_PA1 3 &pcfg_pull_up>, > - /* uart5_txm0 */ > - <2 RK_PA2 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart5m0_ctsn: uart5m0-ctsn { > - rockchip,pins = > - /* uart5m0_ctsn */ > - <1 RK_PD7 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart5m0_rtsn: uart5m0-rtsn { > - rockchip,pins = > - /* uart5m0_rtsn */ > - <2 RK_PA0 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart5m1_xfer: uart5m1-xfer { > - rockchip,pins = > - /* uart5_rxm1 */ > - <3 RK_PC3 4 &pcfg_pull_up>, > - /* uart5_txm1 */ > - <3 RK_PC2 4 &pcfg_pull_up>; > - }; > - }; > - > - uart6 { > - /omit-if-no-ref/ > - uart6m0_xfer: uart6m0-xfer { > - rockchip,pins = > - /* uart6_rxm0 */ > - <2 RK_PA3 3 &pcfg_pull_up>, > - /* uart6_txm0 */ > - <2 RK_PA4 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart6m0_ctsn: uart6m0-ctsn { > - rockchip,pins = > - /* uart6m0_ctsn */ > - <2 RK_PC0 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart6m0_rtsn: uart6m0-rtsn { > - rockchip,pins = > - /* uart6m0_rtsn */ > - <2 RK_PB7 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart6m1_xfer: uart6m1-xfer { > - rockchip,pins = > - /* uart6_rxm1 */ > - <1 RK_PD6 3 &pcfg_pull_up>, > - /* uart6_txm1 */ > - <1 RK_PD5 3 &pcfg_pull_up>; > - }; > - }; > - > - uart7 { > - /omit-if-no-ref/ > - uart7m0_xfer: uart7m0-xfer { > - rockchip,pins = > - /* uart7_rxm0 */ > - <2 RK_PA5 3 &pcfg_pull_up>, > - /* uart7_txm0 */ > - <2 RK_PA6 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart7m0_ctsn: uart7m0-ctsn { > - rockchip,pins = > - /* uart7m0_ctsn */ > - <2 RK_PC2 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart7m0_rtsn: uart7m0-rtsn { > - rockchip,pins = > - /* uart7m0_rtsn */ > - <2 RK_PC1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart7m1_xfer: uart7m1-xfer { > - rockchip,pins = > - /* uart7_rxm1 */ > - <3 RK_PC5 4 &pcfg_pull_up>, > - /* uart7_txm1 */ > - <3 RK_PC4 4 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart7m2_xfer: uart7m2-xfer { > - rockchip,pins = > - /* uart7_rxm2 */ > - <4 RK_PA3 4 &pcfg_pull_up>, > - /* uart7_txm2 */ > - <4 RK_PA2 4 &pcfg_pull_up>; > - }; > - }; > - > - uart8 { > - /omit-if-no-ref/ > - uart8m0_xfer: uart8m0-xfer { > - rockchip,pins = > - /* uart8_rxm0 */ > - <2 RK_PC6 2 &pcfg_pull_up>, > - /* uart8_txm0 */ > - <2 RK_PC5 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart8m0_ctsn: uart8m0-ctsn { > - rockchip,pins = > - /* uart8m0_ctsn */ > - <2 RK_PB2 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart8m0_rtsn: uart8m0-rtsn { > - rockchip,pins = > - /* uart8m0_rtsn */ > - <2 RK_PB1 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart8m1_xfer: uart8m1-xfer { > - rockchip,pins = > - /* uart8_rxm1 */ > - <3 RK_PA0 4 &pcfg_pull_up>, > - /* uart8_txm1 */ > - <2 RK_PD7 4 &pcfg_pull_up>; > - }; > - }; > - > - uart9 { > - /omit-if-no-ref/ > - uart9m0_xfer: uart9m0-xfer { > - rockchip,pins = > - /* uart9_rxm0 */ > - <2 RK_PA7 3 &pcfg_pull_up>, > - /* uart9_txm0 */ > - <2 RK_PB0 3 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart9m0_ctsn: uart9m0-ctsn { > - rockchip,pins = > - /* uart9m0_ctsn */ > - <2 RK_PC4 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart9m0_rtsn: uart9m0-rtsn { > - rockchip,pins = > - /* uart9m0_rtsn */ > - <2 RK_PC3 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - uart9m1_xfer: uart9m1-xfer { > - rockchip,pins = > - /* uart9_rxm1 */ > - <4 RK_PC6 4 &pcfg_pull_up>, > - /* uart9_txm1 */ > - <4 RK_PC5 4 &pcfg_pull_up>; > - }; > - > - /omit-if-no-ref/ > - uart9m2_xfer: uart9m2-xfer { > - rockchip,pins = > - /* uart9_rxm2 */ > - <4 RK_PA5 4 &pcfg_pull_up>, > - /* uart9_txm2 */ > - <4 RK_PA4 4 &pcfg_pull_up>; > - }; > - }; > - > - vop { > - /omit-if-no-ref/ > - vopm0_pins: vopm0-pins { > - rockchip,pins = > - /* vop_pwmm0 */ > - <0 RK_PC3 2 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - vopm1_pins: vopm1-pins { > - rockchip,pins = > - /* vop_pwmm1 */ > - <3 RK_PC4 2 &pcfg_pull_none>; > - }; > - }; > -}; > - > -/* > - * This part is edited handly. > - */ > -&pinctrl { > - spi0-hs { > - /omit-if-no-ref/ > - spi0m0_pins_hs: spi0m0-pins { > - rockchip,pins = > - /* spi0_clkm0 */ > - <0 RK_PB5 2 &pcfg_pull_up_drv_level_1>, > - /* spi0_misom0 */ > - <0 RK_PC5 2 &pcfg_pull_up_drv_level_1>, > - /* spi0_mosim0 */ > - <0 RK_PB6 2 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi0m0_cs0_hs: spi0m0-cs0 { > - rockchip,pins = > - /* spi0_cs0m0 */ > - <0 RK_PC6 2 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi0m0_cs1_hs: spi0m0-cs1 { > - rockchip,pins = > - /* spi0_cs1m0 */ > - <0 RK_PC4 2 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi0m1_pins_hs: spi0m1-pins { > - rockchip,pins = > - /* spi0_clkm1 */ > - <2 RK_PD3 3 &pcfg_pull_up_drv_level_1>, > - /* spi0_misom1 */ > - <2 RK_PD0 3 &pcfg_pull_up_drv_level_1>, > - /* spi0_mosim1 */ > - <2 RK_PD1 3 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi0m1_cs0_hs: spi0m1-cs0 { > - rockchip,pins = > - /* spi0_cs0m1 */ > - <2 RK_PD2 3 &pcfg_pull_up_drv_level_1>; > - }; > - }; > - > - spi1-hs { > - /omit-if-no-ref/ > - spi1m0_pins_hs: spi1m0-pins { > - rockchip,pins = > - /* spi1_clkm0 */ > - <2 RK_PB5 3 &pcfg_pull_up_drv_level_1>, > - /* spi1_misom0 */ > - <2 RK_PB6 3 &pcfg_pull_up_drv_level_1>, > - /* spi1_mosim0 */ > - <2 RK_PB7 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi1m0_cs0_hs: spi1m0-cs0 { > - rockchip,pins = > - /* spi1_cs0m0 */ > - <2 RK_PC0 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi1m0_cs1_hs: spi1m0-cs1 { > - rockchip,pins = > - /* spi1_cs1m0 */ > - <2 RK_PC6 3 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi1m1_pins_hs: spi1m1-pins { > - rockchip,pins = > - /* spi1_clkm1 */ > - <3 RK_PC3 3 &pcfg_pull_up_drv_level_1>, > - /* spi1_misom1 */ > - <3 RK_PC2 3 &pcfg_pull_up_drv_level_1>, > - /* spi1_mosim1 */ > - <3 RK_PC1 3 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi1m1_cs0_hs: spi1m1-cs0 { > - rockchip,pins = > - /* spi1_cs0m1 */ > - <3 RK_PA1 3 &pcfg_pull_up_drv_level_1>; > - }; > - }; > - > - spi2-hs { > - /omit-if-no-ref/ > - spi2m0_pins_hs: spi2m0-pins { > - rockchip,pins = > - /* spi2_clkm0 */ > - <2 RK_PC1 4 &pcfg_pull_up_drv_level_1>, > - /* spi2_misom0 */ > - <2 RK_PC2 4 &pcfg_pull_up_drv_level_1>, > - /* spi2_mosim0 */ > - <2 RK_PC3 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi2m0_cs0_hs: spi2m0-cs0 { > - rockchip,pins = > - /* spi2_cs0m0 */ > - <2 RK_PC4 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi2m0_cs1_hs: spi2m0-cs1 { > - rockchip,pins = > - /* spi2_cs1m0 */ > - <2 RK_PC5 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi2m1_pins_hs: spi2m1-pins { > - rockchip,pins = > - /* spi2_clkm1 */ > - <3 RK_PA0 3 &pcfg_pull_up_drv_level_1>, > - /* spi2_misom1 */ > - <2 RK_PD7 3 &pcfg_pull_up_drv_level_1>, > - /* spi2_mosim1 */ > - <2 RK_PD6 3 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi2m1_cs0_hs: spi2m1-cs0 { > - rockchip,pins = > - /* spi2_cs0m1 */ > - <2 RK_PD5 3 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi2m1_cs1_hs: spi2m1-cs1 { > - rockchip,pins = > - /* spi2_cs1m1 */ > - <2 RK_PD4 3 &pcfg_pull_up_drv_level_1>; > - }; > - }; > - > - spi3-hs { > - /omit-if-no-ref/ > - spi3m0_pins_hs: spi3m0-pins { > - rockchip,pins = > - /* spi3_clkm0 */ > - <4 RK_PB3 4 &pcfg_pull_up_drv_level_1>, > - /* spi3_misom0 */ > - <4 RK_PB0 4 &pcfg_pull_up_drv_level_1>, > - /* spi3_mosim0 */ > - <4 RK_PB2 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi3m0_cs0_hs: spi3m0-cs0 { > - rockchip,pins = > - /* spi3_cs0m0 */ > - <4 RK_PA6 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi3m0_cs1_hs: spi3m0-cs1 { > - rockchip,pins = > - /* spi3_cs1m0 */ > - <4 RK_PA7 4 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi3m1_pins_hs: spi3m1-pins { > - rockchip,pins = > - /* spi3_clkm1 */ > - <4 RK_PC2 2 &pcfg_pull_up_drv_level_1>, > - /* spi3_misom1 */ > - <4 RK_PC5 2 &pcfg_pull_up_drv_level_1>, > - /* spi3_mosim1 */ > - <4 RK_PC3 2 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi3m1_cs0_hs: spi3m1-cs0 { > - rockchip,pins = > - /* spi3_cs0m1 */ > - <4 RK_PC6 2 &pcfg_pull_up_drv_level_1>; > - }; > - > - /omit-if-no-ref/ > - spi3m1_cs1_hs: spi3m1-cs1 { > - rockchip,pins = > - /* spi3_cs1m1 */ > - <4 RK_PD1 2 &pcfg_pull_up_drv_level_1>; > - }; > - }; > - > - gmac-txd-level3 { > - /omit-if-no-ref/ > - gmac0_tx_bus2_level3: gmac0-tx-bus2-level3 { > - rockchip,pins = > - /* gmac0_txd0 */ > - <2 RK_PB3 1 &pcfg_pull_none_drv_level_3>, > - /* gmac0_txd1 */ > - <2 RK_PB4 1 &pcfg_pull_none_drv_level_3>, > - /* gmac0_txen */ > - <2 RK_PB5 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac0_rgmii_bus_level3: gmac0-rgmii-bus-level3 { > - rockchip,pins = > - /* gmac0_rxd2 */ > - <2 RK_PA3 2 &pcfg_pull_none>, > - /* gmac0_rxd3 */ > - <2 RK_PA4 2 &pcfg_pull_none>, > - /* gmac0_txd2 */ > - <2 RK_PA6 2 &pcfg_pull_none_drv_level_3>, > - /* gmac0_txd3 */ > - <2 RK_PA7 2 &pcfg_pull_none_drv_level_3>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_tx_bus2_level3: gmac1m0-tx-bus2-level3 { > - rockchip,pins = > - /* gmac1_txd0m0 */ > - <3 RK_PB5 3 &pcfg_pull_none_drv_level_3>, > - /* gmac1_txd1m0 */ > - <3 RK_PB6 3 &pcfg_pull_none_drv_level_3>, > - /* gmac1_txenm0 */ > - <3 RK_PB7 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_rgmii_bus_level3: gmac1m0-rgmii-bus-level3 { > - rockchip,pins = > - /* gmac1_rxd2m0 */ > - <3 RK_PA4 3 &pcfg_pull_none>, > - /* gmac1_rxd3m0 */ > - <3 RK_PA5 3 &pcfg_pull_none>, > - /* gmac1_txd2m0 */ > - <3 RK_PA2 3 &pcfg_pull_none_drv_level_3>, > - /* gmac1_txd3m0 */ > - <3 RK_PA3 3 &pcfg_pull_none_drv_level_3>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_tx_bus2_level3: gmac1m1-tx-bus2-level3 { > - rockchip,pins = > - /* gmac1_txd0m1 */ > - <4 RK_PA4 3 &pcfg_pull_none_drv_level_3>, > - /* gmac1_txd1m1 */ > - <4 RK_PA5 3 &pcfg_pull_none_drv_level_3>, > - /* gmac1_txenm1 */ > - <4 RK_PA6 3 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_rgmii_bus_level3: gmac1m1-rgmii-bus-level3 { > - rockchip,pins = > - /* gmac1_rxd2m1 */ > - <4 RK_PA1 3 &pcfg_pull_none>, > - /* gmac1_rxd3m1 */ > - <4 RK_PA2 3 &pcfg_pull_none>, > - /* gmac1_txd2m1 */ > - <3 RK_PD6 3 &pcfg_pull_none_drv_level_3>, > - /* gmac1_txd3m1 */ > - <3 RK_PD7 3 &pcfg_pull_none_drv_level_3>; > - }; > - }; > - > - gmac-txc-level2 { > - /omit-if-no-ref/ > - gmac0_rgmii_clk_level2: gmac0-rgmii-clk-level2 { > - rockchip,pins = > - /* gmac0_rxclk */ > - <2 RK_PA5 2 &pcfg_pull_none>, > - /* gmac0_txclk */ > - <2 RK_PB0 2 &pcfg_pull_none_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - gmac1m0_rgmii_clk_level2: gmac1m0-rgmii-clk-level2 { > - rockchip,pins = > - /* gmac1_rxclkm0 */ > - <3 RK_PA7 3 &pcfg_pull_none>, > - /* gmac1_txclkm0 */ > - <3 RK_PA6 3 &pcfg_pull_none_drv_level_2>; > - }; > - > - /omit-if-no-ref/ > - gmac1m1_rgmii_clk_level2: gmac1m1-rgmii-clk-level2 { > - rockchip,pins = > - /* gmac1_rxclkm1 */ > - <4 RK_PA3 3 &pcfg_pull_none>, > - /* gmac1_txclkm1 */ > - <4 RK_PA0 3 &pcfg_pull_none_drv_level_2>; > - }; > - }; > - > - tsadc { > - /omit-if-no-ref/ > - tsadc_pin: tsadc-pin { > - rockchip,pins = > - /* tsadc_pin */ > - <0 RK_PA1 0 &pcfg_pull_none>; > - }; > - }; > - > - lcdc { > - /omit-if-no-ref/ > - lcdc_clock: lcdc-clock { > - rockchip,pins = > - /* lcdc_clk */ > - <3 RK_PA0 1 &pcfg_pull_none>, > - /* lcdc_den */ > - <3 RK_PC3 1 &pcfg_pull_none>, > - /* lcdc_hsync */ > - <3 RK_PC1 1 &pcfg_pull_none>, > - /* lcdc_vsync */ > - <3 RK_PC2 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - lcdc_data16: lcdc-data16 { > - rockchip,pins = > - /* lcdc_d3 */ > - <2 RK_PD3 1 &pcfg_pull_none>, > - /* lcdc_d4 */ > - <2 RK_PD4 1 &pcfg_pull_none>, > - /* lcdc_d5 */ > - <2 RK_PD5 1 &pcfg_pull_none>, > - /* lcdc_d6 */ > - <2 RK_PD6 1 &pcfg_pull_none>, > - /* lcdc_d7 */ > - <2 RK_PD7 1 &pcfg_pull_none>, > - /* lcdc_d10 */ > - <3 RK_PA3 1 &pcfg_pull_none>, > - /* lcdc_d11 */ > - <3 RK_PA4 1 &pcfg_pull_none>, > - /* lcdc_d12 */ > - <3 RK_PA5 1 &pcfg_pull_none>, > - /* lcdc_d13 */ > - <3 RK_PA6 1 &pcfg_pull_none>, > - /* lcdc_d14 */ > - <3 RK_PA7 1 &pcfg_pull_none>, > - /* lcdc_d15 */ > - <3 RK_PB0 1 &pcfg_pull_none>, > - /* lcdc_d19 */ > - <3 RK_PB4 1 &pcfg_pull_none>, > - /* lcdc_d20 */ > - <3 RK_PB5 1 &pcfg_pull_none>, > - /* lcdc_d21 */ > - <3 RK_PB6 1 &pcfg_pull_none>, > - /* lcdc_d22 */ > - <3 RK_PB7 1 &pcfg_pull_none>, > - /* lcdc_d23 */ > - <3 RK_PC0 1 &pcfg_pull_none>; > - }; > - > - /omit-if-no-ref/ > - lcdc_data18: lcdc-data18 { > - rockchip,pins = > - /* lcdc_d2 */ > - <2 RK_PD2 1 &pcfg_pull_none>, > - /* lcdc_d3 */ > - <2 RK_PD3 1 &pcfg_pull_none>, > - /* lcdc_d4 */ > - <2 RK_PD4 1 &pcfg_pull_none>, > - /* lcdc_d5 */ > - <2 RK_PD5 1 &pcfg_pull_none>, > - /* lcdc_d6 */ > - <2 RK_PD6 1 &pcfg_pull_none>, > - /* lcdc_d7 */ > - <2 RK_PD7 1 &pcfg_pull_none>, > - /* lcdc_d10 */ > - <3 RK_PA3 1 &pcfg_pull_none>, > - /* lcdc_d11 */ > - <3 RK_PA4 1 &pcfg_pull_none>, > - /* lcdc_d12 */ > - <3 RK_PA5 1 &pcfg_pull_none>, > - /* lcdc_d13 */ > - <3 RK_PA6 1 &pcfg_pull_none>, > - /* lcdc_d14 */ > - <3 RK_PA7 1 &pcfg_pull_none>, > - /* lcdc_d15 */ > - <3 RK_PB0 1 &pcfg_pull_none>, > - /* lcdc_d18 */ > - <3 RK_PB3 1 &pcfg_pull_none>, > - /* lcdc_d19 */ > - <3 RK_PB4 1 &pcfg_pull_none>, > - /* lcdc_d20 */ > - <3 RK_PB5 1 &pcfg_pull_none>, > - /* lcdc_d21 */ > - <3 RK_PB6 1 &pcfg_pull_none>, > - /* lcdc_d22 */ > - <3 RK_PB7 1 &pcfg_pull_none>, > - /* lcdc_d23 */ > - <3 RK_PC0 1 &pcfg_pull_none>; > - }; > - }; > - > -}; > diff --git a/arch/arm/dts/rk3568-radxa-cm3i.dtsi b/arch/arm/dts/rk3568-radxa-cm3i.dtsi > deleted file mode 100644 > index 45b03dcbbad4..000000000000 > --- a/arch/arm/dts/rk3568-radxa-cm3i.dtsi > +++ /dev/null > @@ -1,412 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include "rk3568.dtsi" > - > -/ { > - compatible = "radxa,cm3i", "rockchip,rk3568"; > - > - aliases { > - mmc0 = &sdhci; > - }; > - > - chosen { > - stdout-path = "serial2:115200n8"; > - }; > - > - gpio-leds { > - compatible = "gpio-leds"; > - > - led_user: led-0 { > - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - function = LED_FUNCTION_HEARTBEAT; > - color = <LED_COLOR_ID_GREEN>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&led_user_en>; > - }; > - }; > - > - pcie30_avdd0v9: pcie30-avdd0v9-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - pcie30_avdd1v8: pcie30-avdd1v8-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v_input>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v_input>; > - }; > - > - /* labeled +5v_input in schematic */ > - vcc5v_input: vcc5v-input-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v_input"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > -}; > - > -&combphy0 { > - status = "okay"; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&combphy2 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&display_subsystem { > - status = "disabled"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc5v_input>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>; > - rockchip,system-power-controller; > - wakeup-source; > - > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > -}; > - > -&pinctrl { > - leds { > - led_user_en: led_user_en { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int: pmic_int { > - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - extcon = <&usb2phy0>; > -}; > diff --git a/arch/arm/dts/rk3568-radxa-e25.dts b/arch/arm/dts/rk3568-radxa-e25.dts > deleted file mode 100644 > index 72ad74c38a2b..000000000000 > --- a/arch/arm/dts/rk3568-radxa-e25.dts > +++ /dev/null > @@ -1,236 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > -#include "rk3568-radxa-cm3i.dtsi" > - > -/ { > - model = "Radxa E25 Carrier Board"; > - compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568"; > - > - aliases { > - mmc1 = &sdmmc0; > - }; > - > - pwm-leds { > - compatible = "pwm-leds-multicolor"; > - > - multi-led { > - color = <LED_COLOR_ID_RGB>; > - max-brightness = <255>; > - > - led-red { > - color = <LED_COLOR_ID_RED>; > - pwms = <&pwm1 0 1000000 0>; > - }; > - > - led-green { > - color = <LED_COLOR_ID_GREEN>; > - pwms = <&pwm2 0 1000000 0>; > - }; > - > - led-blue { > - color = <LED_COLOR_ID_BLUE>; > - pwms = <&pwm12 0 1000000 0>; > - }; > - }; > - }; > - > - vbus_typec: vbus-typec-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vbus_typec_en>; > - regulator-name = "vbus_typec"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - /* actually fed by vcc5v0_sys, dependent > - * on pi6c clock generator > - */ > - vcc3v3_minipcie: vcc3v3-minipcie-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&minipcie_enable_h>; > - regulator-name = "vcc3v3_minipcie"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_pi6c_05>; > - }; > - > - vcc3v3_ngff: vcc3v3-ngff-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&ngffpcie_enable_h>; > - regulator-name = "vcc3v3_ngff"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie30x1_enable_h>; > - regulator-name = "vcc3v3_pcie30x1"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_enable_h>; > - regulator-name = "vcc3v3_pcie"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > -}; > - > -&combphy1 { > - phy-supply = <&vcc3v3_pcie30x1>; > -}; > - > -&pcie2x1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie20_reset_h>; > - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pi6c_05>; > - status = "okay"; > -}; > - > -&pcie30phy { > - data-lanes = <1 2>; > - status = "okay"; > -}; > - > -&pcie3x1 { > - num-lanes = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie30x1m0_pins>; > - reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_minipcie>; > - status = "okay"; > -}; > - > -&pcie3x2 { > - num-lanes = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie30x2_reset_h>; > - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pi6c_05>; > - status = "okay"; > -}; > - > -&pinctrl { > - pcie { > - pcie20_reset_h: pcie20-reset-h { > - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie30x1_enable_h: pcie30x1-enable-h { > - rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie30x2_reset_h: pcie30x2-reset-h { > - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie_enable_h: pcie-enable-h { > - rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb { > - minipcie_enable_h: minipcie-enable-h { > - rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - ngffpcie_enable_h: ngffpcie-enable-h { > - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vbus_typec_en: vbus_typec_en { > - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pwm1 { > - status = "okay"; > -}; > - > -&pwm2 { > - status = "okay"; > -}; > - > -&pwm12 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pwm12m1_pins>; > - status = "okay"; > -}; > - > -&sata1 { > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - /* Also used in pcie30x1_clkreqnm0 */ > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vbus_typec>; > - status = "okay"; > -}; > - > -&usb2phy1_host { > - phy-supply = <&vcc3v3_minipcie>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc3v3_ngff>; > - status = "okay"; > -}; > diff --git a/arch/arm/dts/rk3568-rock-3a.dts b/arch/arm/dts/rk3568-rock-3a.dts > deleted file mode 100644 > index a5e974ea659e..000000000000 > --- a/arch/arm/dts/rk3568-rock-3a.dts > +++ /dev/null > @@ -1,859 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > - > -/dts-v1/; > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/soc/rockchip,vop2.h> > -#include "rk3568.dtsi" > - > -/ { > - model = "Radxa ROCK3 Model A"; > - compatible = "radxa,rock3a", "rockchip,rk3568"; > - > - aliases { > - ethernet0 = &gmac1; > - mmc0 = &sdhci; > - mmc1 = &sdmmc0; > - mmc2 = &sdmmc2; > - }; > - > - chosen: chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - hdmi-con { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_con_in: endpoint { > - remote-endpoint = <&hdmi_out_con>; > - }; > - }; > - }; > - > - gmac1_clkin: external-gmac1-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "gmac1_clkin"; > - #clock-cells = <0>; > - }; > - > - leds { > - compatible = "gpio-leds"; > - > - led_user: led-0 { > - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > - function = LED_FUNCTION_HEARTBEAT; > - color = <LED_COLOR_ID_BLUE>; > - linux,default-trigger = "heartbeat"; > - pinctrl-names = "default"; > - pinctrl-0 = <&led_user_en>; > - }; > - }; > - > - rk809-sound { > - compatible = "simple-audio-card"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,name = "Analog RK809"; > - simple-audio-card,mclk-fs = <256>; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s1_8ch>; > - }; > - > - simple-audio-card,codec { > - sound-dai = <&rk809>; > - }; > - }; > - > - sdio_pwrseq: sdio-pwrseq { > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk809 1>; > - clock-names = "ext_clock"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_enable>; > - post-power-on-delay-ms = <100>; > - power-off-delay-us = <5000000>; > - reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; > - }; > - > - vcc12v_dcin: vcc12v-dcin-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc12v_dcin"; > - regulator-always-on; > - regulator-boot-on; > - }; > - > - pcie30_avdd0v9: pcie30-avdd0v9-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - pcie30_avdd1v8: pcie30-avdd1v8-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "pcie30_avdd1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc3v3_sys>; > - }; > - > - /* pi6c pcie clock generator */ > - vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_pi6c_03"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc3v3_pcie: vcc3v3-pcie-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_enable_h>; > - regulator-name = "vcc3v3_pcie"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - vcc3v3_sys: vcc3v3-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc5v0_sys: vcc5v0-sys-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc5v0_usb: vcc5v0-usb-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc5v0_usb_host: vcc5v0-usb-host-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_host_en>; > - regulator-name = "vcc5v0_usb_host"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb_hub: vcc5v0-usb-hub-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_hub_en>; > - regulator-name = "vcc5v0_usb_hub"; > - regulator-always-on; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en>; > - regulator-name = "vcc5v0_usb_otg"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc_cam: vcc-cam-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc_cam_en>; > - regulator-name = "vcc_cam"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_mipi: vcc-mipi-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc_mipi_en>; > - regulator-name = "vcc_mipi"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc3v3_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > -}; > - > -&combphy0 { > - status = "okay"; > -}; > - > -&combphy1 { > - status = "okay"; > -}; > - > -&combphy2 { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu1 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu2 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&cpu3 { > - cpu-supply = <&vdd_cpu>; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; > - clock_in_out = "input"; > - phy-handle = <&rgmii_phy1>; > - phy-mode = "rgmii-id"; > - phy-supply = <&vcc_3v3>; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m1_miim > - &gmac1m1_tx_bus2 > - &gmac1m1_rx_bus2 > - &gmac1m1_rgmii_clk > - &gmac1m1_clkinout > - &gmac1m1_rgmii_bus>; > - status = "okay"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&hdmi { > - avdd-0v9-supply = <&vdda0v9_image>; > - avdd-1v8-supply = <&vcca1v8_image>; > - pinctrl-names = "default"; > - pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm1_cec>; > - status = "okay"; > -}; > - > -&hdmi_in { > - hdmi_in_vp0: endpoint { > - remote-endpoint = <&vp0_out_hdmi>; > - }; > -}; > - > -&hdmi_out { > - hdmi_out_con: endpoint { > - remote-endpoint = <&hdmi_con_in>; > - }; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - vdd_cpu: regulator@1c { > - compatible = "tcs,tcs4525"; > - reg = <0x1c>; > - fcs,suspend-voltage-selector = <1>; > - regulator-name = "vdd_cpu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1150000>; > - regulator-ramp-delay = <2300>; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > - #clock-cells = <1>; > - clock-names = "mclk"; > - clocks = <&cru I2S1_MCLKOUT_TX>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; > - rockchip,system-power-controller; > - #sound-dai-cells = <0>; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-always-on; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - > - codec { > - mic-in-differential; > - }; > - }; > -}; > - > -&i2c3 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c3m1_xfer>; > - status = "disabled"; > -}; > - > -&i2c4 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c4m1_xfer>; > - status = "disabled"; > -}; > - > -&i2c5 { > - status = "okay"; > - > - hym8563: rtc@51 { > - compatible = "haoyu,hym8563"; > - reg = <0x51>; > - interrupt-parent = <&gpio0>; > - interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <0>; > - clock-output-names = "rtcic_32kout"; > - pinctrl-names = "default"; > - pinctrl-0 = <&hym8563_int>; > - wakeup-source; > - }; > -}; > - > -&i2s0_8ch { > - status = "okay"; > -}; > - > -&i2s1_8ch { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&i2s2_2ch { > - rockchip,trcm-sync-tx-only; > - status = "okay"; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - pinctrl-names = "default"; > - pinctrl-0 = <ð_phy_rst>; > - reset-assert-us = <20000>; > - reset-deassert-us = <100000>; > - reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; > - }; > -}; > - > -&pcie2x1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_reset_h>; > - reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pcie30phy { > - phy-supply = <&vcc3v3_pi6c_03>; > - status = "okay"; > -}; > - > -&pcie3x2 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie30x2m1_pins>; > - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pinctrl { > - cam { > - vcc_cam_en: vcc_cam_en { > - rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - display { > - vcc_mipi_en: vcc_mipi_en { > - rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - ethernet { > - eth_phy_rst: eth_phy_rst { > - rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - hym8563 { > - hym8563_int: hym8563-int { > - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - leds { > - led_user_en: led_user_en { > - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie_enable_h: pcie-enable-h { > - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie_reset_h: pcie-reset-h { > - rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int: pmic_int { > - rockchip,pins = > - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - usb { > - vcc5v0_usb_host_en: vcc5v0_usb_host_en { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - vcc5v0_usb_hub_en: vcc5v0_usb_hub_en { > - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - bt { > - bt_enable: bt-enable { > - rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - bt_host_wake: bt-host-wake { > - rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - > - bt_wake: bt-wake { > - rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - sdio-pwrseq { > - wifi_enable: wifi-enable { > - rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio2-supply = <&vcc_1v8>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_1v8>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr50; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > -}; > - > -&sdmmc2 { > - bus-width = <4>; > - disable-wp; > - cap-sd-highspeed; > - cap-sdio-irq; > - keep-power-in-suspend; > - mmc-pwrseq = <&sdio_pwrseq>; > - non-removable; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; > - sd-uhs-sdr12; > - sd-uhs-sdr25; > - sd-uhs-sdr50; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sys>; > - vqmmc-supply = <&vcc_1v8>; > - status = "okay"; > -}; > - > -&tsadc { > - rockchip,hw-tshut-mode = <1>; > - rockchip,hw-tshut-polarity = <0>; > - status = "okay"; > -}; > - > -&uart1 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; > - uart-has-rtscts; > - status = "okay"; > - > - bluetooth { > - compatible = "brcm,bcm43438-bt"; > - clocks = <&rk809 1>; > - clock-names = "lpo"; > - device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; > - host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; > - shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>; > - vbat-supply = <&vcc3v3_sys>; > - vddio-supply = <&vcc_1v8>; > - /* vddio comes from regulator on module, use IO bank voltage instead */ > - }; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host0_xhci { > - extcon = <&usb2phy0>; > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - status = "okay"; > -}; > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -&usb2phy0_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy0_otg { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -&usb2phy1 { > - status = "okay"; > -}; > - > -&usb2phy1_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&usb2phy1_otg { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&vop { > - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > - status = "okay"; > -}; > - > -&vop_mmu { > - status = "okay"; > -}; > - > -&vp0 { > - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > - reg = <ROCKCHIP_VOP2_EP_HDMI0>; > - remote-endpoint = <&hdmi_in_vp0>; > - }; > -}; > diff --git a/arch/arm/dts/rk3568.dtsi b/arch/arm/dts/rk3568.dtsi > deleted file mode 100644 > index f1be76a54ceb..000000000000 > --- a/arch/arm/dts/rk3568.dtsi > +++ /dev/null > @@ -1,267 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. > - */ > - > -#include "rk356x.dtsi" > - > -/ { > - compatible = "rockchip,rk3568"; > - > - sata0: sata@fc000000 { > - compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; > - reg = <0 0xfc000000 0 0x1000>; > - clocks = <&cru ACLK_SATA0>, <&cru CLK_SATA0_PMALIVE>, > - <&cru CLK_SATA0_RXOOB>; > - clock-names = "sata", "pmalive", "rxoob"; > - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; > - phys = <&combphy0 PHY_TYPE_SATA>; > - phy-names = "sata-phy"; > - ports-implemented = <0x1>; > - power-domains = <&power RK3568_PD_PIPE>; > - status = "disabled"; > - }; > - > - pipe_phy_grf0: syscon@fdc70000 { > - compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; > - reg = <0x0 0xfdc70000 0x0 0x1000>; > - }; > - > - qos_pcie3x1: qos@fe190080 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190080 0x0 0x20>; > - }; > - > - qos_pcie3x2: qos@fe190100 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190100 0x0 0x20>; > - }; > - > - qos_sata0: qos@fe190200 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190200 0x0 0x20>; > - }; > - > - pcie30_phy_grf: syscon@fdcb8000 { > - compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon"; > - reg = <0x0 0xfdcb8000 0x0 0x10000>; > - }; > - > - pcie30phy: phy@fe8c0000 { > - compatible = "rockchip,rk3568-pcie3-phy"; > - reg = <0x0 0xfe8c0000 0x0 0x20000>; > - #phy-cells = <0>; > - clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>, > - <&cru PCLK_PCIE30PHY>; > - clock-names = "refclk_m", "refclk_n", "pclk"; > - resets = <&cru SRST_PCIE30PHY>; > - reset-names = "phy"; > - rockchip,phy-grf = <&pcie30_phy_grf>; > - status = "disabled"; > - }; > - > - pcie3x1: pcie@fe270000 { > - compatible = "rockchip,rk3568-pcie"; > - #address-cells = <3>; > - #size-cells = <2>; > - bus-range = <0x0 0xf>; > - clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>, > - <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>, > - <&cru CLK_PCIE30X1_AUX_NDFT>; > - clock-names = "aclk_mst", "aclk_slv", > - "aclk_dbi", "pclk", "aux"; > - device_type = "pci"; > - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; > - #interrupt-cells = <1>; > - interrupt-map-mask = <0 0 0 7>; > - interrupt-map = <0 0 0 1 &pcie3x1_intc 0>, > - <0 0 0 2 &pcie3x1_intc 1>, > - <0 0 0 3 &pcie3x1_intc 2>, > - <0 0 0 4 &pcie3x1_intc 3>; > - linux,pci-domain = <1>; > - num-ib-windows = <6>; > - num-ob-windows = <2>; > - max-link-speed = <3>; > - msi-map = <0x0 &gic 0x1000 0x1000>; > - num-lanes = <1>; > - phys = <&pcie30phy>; > - phy-names = "pcie-phy"; > - power-domains = <&power RK3568_PD_PIPE>; > - reg = <0x3 0xc0400000 0x0 0x00400000>, > - <0x0 0xfe270000 0x0 0x00010000>, > - <0x0 0xf2000000 0x0 0x00100000>; > - ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>, > - <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>, > - <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>; > - reg-names = "dbi", "apb", "config"; > - resets = <&cru SRST_PCIE30X1_POWERUP>; > - reset-names = "pipe"; > - /* bifurcation; lane1 when using 1+1 */ > - status = "disabled"; > - > - pcie3x1_intc: legacy-interrupt-controller { > - interrupt-controller; > - #address-cells = <0>; > - #interrupt-cells = <1>; > - interrupt-parent = <&gic>; > - interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; > - }; > - }; > - > - pcie3x2: pcie@fe280000 { > - compatible = "rockchip,rk3568-pcie"; > - #address-cells = <3>; > - #size-cells = <2>; > - bus-range = <0x0 0xf>; > - clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>, > - <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>, > - <&cru CLK_PCIE30X2_AUX_NDFT>; > - clock-names = "aclk_mst", "aclk_slv", > - "aclk_dbi", "pclk", "aux"; > - device_type = "pci"; > - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; > - #interrupt-cells = <1>; > - interrupt-map-mask = <0 0 0 7>; > - interrupt-map = <0 0 0 1 &pcie3x2_intc 0>, > - <0 0 0 2 &pcie3x2_intc 1>, > - <0 0 0 3 &pcie3x2_intc 2>, > - <0 0 0 4 &pcie3x2_intc 3>; > - linux,pci-domain = <2>; > - num-ib-windows = <6>; > - num-ob-windows = <2>; > - max-link-speed = <3>; > - msi-map = <0x0 &gic 0x2000 0x1000>; > - num-lanes = <2>; > - phys = <&pcie30phy>; > - phy-names = "pcie-phy"; > - power-domains = <&power RK3568_PD_PIPE>; > - reg = <0x3 0xc0800000 0x0 0x00400000>, > - <0x0 0xfe280000 0x0 0x00010000>, > - <0x0 0xf0000000 0x0 0x00100000>; > - ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>, > - <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>, > - <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>; > - reg-names = "dbi", "apb", "config"; > - resets = <&cru SRST_PCIE30X2_POWERUP>; > - reset-names = "pipe"; > - /* bifurcation; lane0 when using 1+1 */ > - status = "disabled"; > - > - pcie3x2_intc: legacy-interrupt-controller { > - interrupt-controller; > - #address-cells = <0>; > - #interrupt-cells = <1>; > - interrupt-parent = <&gic>; > - interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; > - }; > - }; > - > - gmac0: ethernet@fe2a0000 { > - compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; > - reg = <0x0 0xfe2a0000 0x0 0x10000>; > - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "macirq", "eth_wake_irq"; > - clocks = <&cru SCLK_GMAC0>, <&cru SCLK_GMAC0_RX_TX>, > - <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_MAC0_REFOUT>, > - <&cru ACLK_GMAC0>, <&cru PCLK_GMAC0>, > - <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>; > - clock-names = "stmmaceth", "mac_clk_rx", > - "mac_clk_tx", "clk_mac_refout", > - "aclk_mac", "pclk_mac", > - "clk_mac_speed", "ptp_ref"; > - resets = <&cru SRST_A_GMAC0>; > - reset-names = "stmmaceth"; > - rockchip,grf = <&grf>; > - snps,axi-config = <&gmac0_stmmac_axi_setup>; > - snps,mixed-burst; > - snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; > - snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; > - snps,tso; > - status = "disabled"; > - > - mdio0: mdio { > - compatible = "snps,dwmac-mdio"; > - #address-cells = <0x1>; > - #size-cells = <0x0>; > - }; > - > - gmac0_stmmac_axi_setup: stmmac-axi-config { > - snps,blen = <0 0 0 0 16 8 4>; > - snps,rd_osr_lmt = <8>; > - snps,wr_osr_lmt = <4>; > - }; > - > - gmac0_mtl_rx_setup: rx-queues-config { > - snps,rx-queues-to-use = <1>; > - queue0 {}; > - }; > - > - gmac0_mtl_tx_setup: tx-queues-config { > - snps,tx-queues-to-use = <1>; > - queue0 {}; > - }; > - }; > - > - combphy0: phy@fe820000 { > - compatible = "rockchip,rk3568-naneng-combphy"; > - reg = <0x0 0xfe820000 0x0 0x100>; > - clocks = <&pmucru CLK_PCIEPHY0_REF>, > - <&cru PCLK_PIPEPHY0>, > - <&cru PCLK_PIPE>; > - clock-names = "ref", "apb", "pipe"; > - assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>; > - assigned-clock-rates = <100000000>; > - resets = <&cru SRST_PIPEPHY0>; > - rockchip,pipe-grf = <&pipegrf>; > - rockchip,pipe-phy-grf = <&pipe_phy_grf0>; > - #phy-cells = <1>; > - status = "disabled"; > - }; > -}; > - > -&cpu0_opp_table { > - opp-1992000000 { > - opp-hz = /bits/ 64 <1992000000>; > - opp-microvolt = <1150000 1150000 1150000>; > - }; > -}; > - > -&pipegrf { > - compatible = "rockchip,rk3568-pipe-grf", "syscon"; > -}; > - > -&power { > - power-domain@RK3568_PD_PIPE { > - reg = <RK3568_PD_PIPE>; > - clocks = <&cru PCLK_PIPE>; > - pm_qos = <&qos_pcie2x1>, > - <&qos_pcie3x1>, > - <&qos_pcie3x2>, > - <&qos_sata0>, > - <&qos_sata1>, > - <&qos_sata2>, > - <&qos_usb3_0>, > - <&qos_usb3_1>; > - #power-domain-cells = <0>; > - }; > -}; > - > -&usb_host0_xhci { > - phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>; > - phy-names = "usb2-phy", "usb3-phy"; > -}; > - > -&vop { > - compatible = "rockchip,rk3568-vop"; > -}; > diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi > deleted file mode 100644 > index c19c0f1b3778..000000000000 > --- a/arch/arm/dts/rk356x.dtsi > +++ /dev/null > @@ -1,1886 +0,0 @@ > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > -/* > - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. > - */ > - > -#include <dt-bindings/clock/rk3568-cru.h> > -#include <dt-bindings/interrupt-controller/arm-gic.h> > -#include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/phy/phy.h> > -#include <dt-bindings/pinctrl/rockchip.h> > -#include <dt-bindings/power/rk3568-power.h> > -#include <dt-bindings/soc/rockchip,boot-mode.h> > -#include <dt-bindings/thermal/thermal.h> > - > -/ { > - interrupt-parent = <&gic>; > - #address-cells = <2>; > - #size-cells = <2>; > - > - aliases { > - gpio0 = &gpio0; > - gpio1 = &gpio1; > - gpio2 = &gpio2; > - gpio3 = &gpio3; > - gpio4 = &gpio4; > - i2c0 = &i2c0; > - i2c1 = &i2c1; > - i2c2 = &i2c2; > - i2c3 = &i2c3; > - i2c4 = &i2c4; > - i2c5 = &i2c5; > - serial0 = &uart0; > - serial1 = &uart1; > - serial2 = &uart2; > - serial3 = &uart3; > - serial4 = &uart4; > - serial5 = &uart5; > - serial6 = &uart6; > - serial7 = &uart7; > - serial8 = &uart8; > - serial9 = &uart9; > - spi0 = &spi0; > - spi1 = &spi1; > - spi2 = &spi2; > - spi3 = &spi3; > - }; > - > - cpus { > - #address-cells = <2>; > - #size-cells = <0>; > - > - cpu0: cpu@0 { > - device_type = "cpu"; > - compatible = "arm,cortex-a55"; > - reg = <0x0 0x0>; > - clocks = <&scmi_clk 0>; > - #cooling-cells = <2>; > - enable-method = "psci"; > - operating-points-v2 = <&cpu0_opp_table>; > - }; > - > - cpu1: cpu@100 { > - device_type = "cpu"; > - compatible = "arm,cortex-a55"; > - reg = <0x0 0x100>; > - #cooling-cells = <2>; > - enable-method = "psci"; > - operating-points-v2 = <&cpu0_opp_table>; > - }; > - > - cpu2: cpu@200 { > - device_type = "cpu"; > - compatible = "arm,cortex-a55"; > - reg = <0x0 0x200>; > - #cooling-cells = <2>; > - enable-method = "psci"; > - operating-points-v2 = <&cpu0_opp_table>; > - }; > - > - cpu3: cpu@300 { > - device_type = "cpu"; > - compatible = "arm,cortex-a55"; > - reg = <0x0 0x300>; > - #cooling-cells = <2>; > - enable-method = "psci"; > - operating-points-v2 = <&cpu0_opp_table>; > - }; > - }; > - > - cpu0_opp_table: opp-table-0 { > - compatible = "operating-points-v2"; > - opp-shared; > - > - opp-408000000 { > - opp-hz = /bits/ 64 <408000000>; > - opp-microvolt = <900000 900000 1150000>; > - clock-latency-ns = <40000>; > - }; > - > - opp-600000000 { > - opp-hz = /bits/ 64 <600000000>; > - opp-microvolt = <900000 900000 1150000>; > - }; > - > - opp-816000000 { > - opp-hz = /bits/ 64 <816000000>; > - opp-microvolt = <900000 900000 1150000>; > - opp-suspend; > - }; > - > - opp-1104000000 { > - opp-hz = /bits/ 64 <1104000000>; > - opp-microvolt = <900000 900000 1150000>; > - }; > - > - opp-1416000000 { > - opp-hz = /bits/ 64 <1416000000>; > - opp-microvolt = <900000 900000 1150000>; > - }; > - > - opp-1608000000 { > - opp-hz = /bits/ 64 <1608000000>; > - opp-microvolt = <975000 975000 1150000>; > - }; > - > - opp-1800000000 { > - opp-hz = /bits/ 64 <1800000000>; > - opp-microvolt = <1050000 1050000 1150000>; > - }; > - }; > - > - display_subsystem: display-subsystem { > - compatible = "rockchip,display-subsystem"; > - ports = <&vop_out>; > - }; > - > - firmware { > - scmi: scmi { > - compatible = "arm,scmi-smc"; > - arm,smc-id = <0x82000010>; > - shmem = <&scmi_shmem>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - scmi_clk: protocol@14 { > - reg = <0x14>; > - #clock-cells = <1>; > - }; > - }; > - }; > - > - gpu_opp_table: opp-table-1 { > - compatible = "operating-points-v2"; > - > - opp-200000000 { > - opp-hz = /bits/ 64 <200000000>; > - opp-microvolt = <825000>; > - }; > - > - opp-300000000 { > - opp-hz = /bits/ 64 <300000000>; > - opp-microvolt = <825000>; > - }; > - > - opp-400000000 { > - opp-hz = /bits/ 64 <400000000>; > - opp-microvolt = <825000>; > - }; > - > - opp-600000000 { > - opp-hz = /bits/ 64 <600000000>; > - opp-microvolt = <825000>; > - }; > - > - opp-700000000 { > - opp-hz = /bits/ 64 <700000000>; > - opp-microvolt = <900000>; > - }; > - > - opp-800000000 { > - opp-hz = /bits/ 64 <800000000>; > - opp-microvolt = <1000000>; > - }; > - }; > - > - hdmi_sound: hdmi-sound { > - compatible = "simple-audio-card"; > - simple-audio-card,name = "HDMI"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,mclk-fs = <256>; > - status = "disabled"; > - > - simple-audio-card,codec { > - sound-dai = <&hdmi>; > - }; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s0_8ch>; > - }; > - }; > - > - pmu { > - compatible = "arm,cortex-a55-pmu"; > - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; > - }; > - > - psci { > - compatible = "arm,psci-1.0"; > - method = "smc"; > - }; > - > - timer { > - compatible = "arm,armv8-timer"; > - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; > - arm,no-tick-in-suspend; > - }; > - > - xin24m: xin24m { > - compatible = "fixed-clock"; > - clock-frequency = <24000000>; > - clock-output-names = "xin24m"; > - #clock-cells = <0>; > - }; > - > - xin32k: xin32k { > - compatible = "fixed-clock"; > - clock-frequency = <32768>; > - clock-output-names = "xin32k"; > - pinctrl-0 = <&clk32k_out0>; > - pinctrl-names = "default"; > - #clock-cells = <0>; > - }; > - > - sram@10f000 { > - compatible = "mmio-sram"; > - reg = <0x0 0x0010f000 0x0 0x100>; > - #address-cells = <1>; > - #size-cells = <1>; > - ranges = <0 0x0 0x0010f000 0x100>; > - > - scmi_shmem: sram@0 { > - compatible = "arm,scmi-shmem"; > - reg = <0x0 0x100>; > - }; > - }; > - > - sata1: sata@fc400000 { > - compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; > - reg = <0 0xfc400000 0 0x1000>; > - clocks = <&cru ACLK_SATA1>, <&cru CLK_SATA1_PMALIVE>, > - <&cru CLK_SATA1_RXOOB>; > - clock-names = "sata", "pmalive", "rxoob"; > - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; > - phys = <&combphy1 PHY_TYPE_SATA>; > - phy-names = "sata-phy"; > - ports-implemented = <0x1>; > - power-domains = <&power RK3568_PD_PIPE>; > - status = "disabled"; > - }; > - > - sata2: sata@fc800000 { > - compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; > - reg = <0 0xfc800000 0 0x1000>; > - clocks = <&cru ACLK_SATA2>, <&cru CLK_SATA2_PMALIVE>, > - <&cru CLK_SATA2_RXOOB>; > - clock-names = "sata", "pmalive", "rxoob"; > - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; > - phys = <&combphy2 PHY_TYPE_SATA>; > - phy-names = "sata-phy"; > - ports-implemented = <0x1>; > - power-domains = <&power RK3568_PD_PIPE>; > - status = "disabled"; > - }; > - > - usb_host0_xhci: usb@fcc00000 { > - compatible = "rockchip,rk3568-dwc3", "snps,dwc3"; > - reg = <0x0 0xfcc00000 0x0 0x400000>; > - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>, > - <&cru ACLK_USB3OTG0>; > - clock-names = "ref_clk", "suspend_clk", > - "bus_clk"; > - dr_mode = "otg"; > - phy_type = "utmi_wide"; > - power-domains = <&power RK3568_PD_PIPE>; > - resets = <&cru SRST_USB3OTG0>; > - snps,dis_u2_susphy_quirk; > - status = "disabled"; > - }; > - > - usb_host1_xhci: usb@fd000000 { > - compatible = "rockchip,rk3568-dwc3", "snps,dwc3"; > - reg = <0x0 0xfd000000 0x0 0x400000>; > - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>, > - <&cru ACLK_USB3OTG1>; > - clock-names = "ref_clk", "suspend_clk", > - "bus_clk"; > - dr_mode = "host"; > - phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>; > - phy-names = "usb2-phy", "usb3-phy"; > - phy_type = "utmi_wide"; > - power-domains = <&power RK3568_PD_PIPE>; > - resets = <&cru SRST_USB3OTG1>; > - snps,dis_u2_susphy_quirk; > - status = "disabled"; > - }; > - > - gic: interrupt-controller@fd400000 { > - compatible = "arm,gic-v3"; > - reg = <0x0 0xfd400000 0 0x10000>, /* GICD */ > - <0x0 0xfd460000 0 0x80000>; /* GICR */ > - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-controller; > - #interrupt-cells = <3>; > - mbi-alias = <0x0 0xfd410000>; > - mbi-ranges = <296 24>; > - msi-controller; > - }; > - > - usb_host0_ehci: usb@fd800000 { > - compatible = "generic-ehci"; > - reg = <0x0 0xfd800000 0x0 0x40000>; > - interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>, > - <&cru PCLK_USB>; > - phys = <&usb2phy1_otg>; > - phy-names = "usb"; > - status = "disabled"; > - }; > - > - usb_host0_ohci: usb@fd840000 { > - compatible = "generic-ohci"; > - reg = <0x0 0xfd840000 0x0 0x40000>; > - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>, > - <&cru PCLK_USB>; > - phys = <&usb2phy1_otg>; > - phy-names = "usb"; > - status = "disabled"; > - }; > - > - usb_host1_ehci: usb@fd880000 { > - compatible = "generic-ehci"; > - reg = <0x0 0xfd880000 0x0 0x40000>; > - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>, > - <&cru PCLK_USB>; > - phys = <&usb2phy1_host>; > - phy-names = "usb"; > - status = "disabled"; > - }; > - > - usb_host1_ohci: usb@fd8c0000 { > - compatible = "generic-ohci"; > - reg = <0x0 0xfd8c0000 0x0 0x40000>; > - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>, > - <&cru PCLK_USB>; > - phys = <&usb2phy1_host>; > - phy-names = "usb"; > - status = "disabled"; > - }; > - > - pmugrf: syscon@fdc20000 { > - compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd"; > - reg = <0x0 0xfdc20000 0x0 0x10000>; > - > - pmu_io_domains: io-domains { > - compatible = "rockchip,rk3568-pmu-io-voltage-domain"; > - status = "disabled"; > - }; > - }; > - > - pipegrf: syscon@fdc50000 { > - reg = <0x0 0xfdc50000 0x0 0x1000>; > - }; > - > - grf: syscon@fdc60000 { > - compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd"; > - reg = <0x0 0xfdc60000 0x0 0x10000>; > - }; > - > - pipe_phy_grf1: syscon@fdc80000 { > - compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; > - reg = <0x0 0xfdc80000 0x0 0x1000>; > - }; > - > - pipe_phy_grf2: syscon@fdc90000 { > - compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; > - reg = <0x0 0xfdc90000 0x0 0x1000>; > - }; > - > - usb2phy0_grf: syscon@fdca0000 { > - compatible = "rockchip,rk3568-usb2phy-grf", "syscon"; > - reg = <0x0 0xfdca0000 0x0 0x8000>; > - }; > - > - usb2phy1_grf: syscon@fdca8000 { > - compatible = "rockchip,rk3568-usb2phy-grf", "syscon"; > - reg = <0x0 0xfdca8000 0x0 0x8000>; > - }; > - > - pmucru: clock-controller@fdd00000 { > - compatible = "rockchip,rk3568-pmucru"; > - reg = <0x0 0xfdd00000 0x0 0x1000>; > - #clock-cells = <1>; > - #reset-cells = <1>; > - }; > - > - cru: clock-controller@fdd20000 { > - compatible = "rockchip,rk3568-cru"; > - reg = <0x0 0xfdd20000 0x0 0x1000>; > - clocks = <&xin24m>; > - clock-names = "xin24m"; > - #clock-cells = <1>; > - #reset-cells = <1>; > - assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, <&pmucru PLL_PPLL>; > - assigned-clock-rates = <32768>, <1200000000>, <200000000>; > - assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>; > - rockchip,grf = <&grf>; > - }; > - > - i2c0: i2c@fdd40000 { > - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; > - reg = <0x0 0xfdd40000 0x0 0x1000>; > - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>; > - clock-names = "i2c", "pclk"; > - pinctrl-0 = <&i2c0_xfer>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - uart0: serial@fdd50000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfdd50000 0x0 0x100>; > - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 0>, <&dmac0 1>; > - pinctrl-0 = <&uart0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - pwm0: pwm@fdd70000 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfdd70000 0x0 0x10>; > - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm0m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm1: pwm@fdd70010 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfdd70010 0x0 0x10>; > - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm1m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm2: pwm@fdd70020 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfdd70020 0x0 0x10>; > - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm2m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm3: pwm@fdd70030 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfdd70030 0x0 0x10>; > - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm3_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pmu: power-management@fdd90000 { > - compatible = "rockchip,rk3568-pmu", "syscon", "simple-mfd"; > - reg = <0x0 0xfdd90000 0x0 0x1000>; > - > - power: power-controller { > - compatible = "rockchip,rk3568-power-controller"; > - #power-domain-cells = <1>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - /* These power domains are grouped by VD_GPU */ > - power-domain@RK3568_PD_GPU { > - reg = <RK3568_PD_GPU>; > - clocks = <&cru ACLK_GPU_PRE>, > - <&cru PCLK_GPU_PRE>; > - pm_qos = <&qos_gpu>; > - #power-domain-cells = <0>; > - }; > - > - /* These power domains are grouped by VD_LOGIC */ > - power-domain@RK3568_PD_VI { > - reg = <RK3568_PD_VI>; > - clocks = <&cru HCLK_VI>, > - <&cru PCLK_VI>; > - pm_qos = <&qos_isp>, > - <&qos_vicap0>, > - <&qos_vicap1>; > - #power-domain-cells = <0>; > - }; > - > - power-domain@RK3568_PD_VO { > - reg = <RK3568_PD_VO>; > - clocks = <&cru HCLK_VO>, > - <&cru PCLK_VO>, > - <&cru ACLK_VOP_PRE>; > - pm_qos = <&qos_hdcp>, > - <&qos_vop_m0>, > - <&qos_vop_m1>; > - #power-domain-cells = <0>; > - }; > - > - power-domain@RK3568_PD_RGA { > - reg = <RK3568_PD_RGA>; > - clocks = <&cru HCLK_RGA_PRE>, > - <&cru PCLK_RGA_PRE>; > - pm_qos = <&qos_ebc>, > - <&qos_iep>, > - <&qos_jpeg_dec>, > - <&qos_jpeg_enc>, > - <&qos_rga_rd>, > - <&qos_rga_wr>; > - #power-domain-cells = <0>; > - }; > - > - power-domain@RK3568_PD_VPU { > - reg = <RK3568_PD_VPU>; > - clocks = <&cru HCLK_VPU_PRE>; > - pm_qos = <&qos_vpu>; > - #power-domain-cells = <0>; > - }; > - > - power-domain@RK3568_PD_RKVDEC { > - clocks = <&cru HCLK_RKVDEC_PRE>; > - reg = <RK3568_PD_RKVDEC>; > - pm_qos = <&qos_rkvdec>; > - #power-domain-cells = <0>; > - }; > - > - power-domain@RK3568_PD_RKVENC { > - reg = <RK3568_PD_RKVENC>; > - clocks = <&cru HCLK_RKVENC_PRE>; > - pm_qos = <&qos_rkvenc_rd_m0>, > - <&qos_rkvenc_rd_m1>, > - <&qos_rkvenc_wr_m0>; > - #power-domain-cells = <0>; > - }; > - }; > - }; > - > - gpu: gpu@fde60000 { > - compatible = "rockchip,rk3568-mali", "arm,mali-bifrost"; > - reg = <0x0 0xfde60000 0x0 0x4000>; > - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "job", "mmu", "gpu"; > - clocks = <&scmi_clk 1>, <&cru CLK_GPU>; > - clock-names = "gpu", "bus"; > - #cooling-cells = <2>; > - operating-points-v2 = <&gpu_opp_table>; > - power-domains = <&power RK3568_PD_GPU>; > - status = "disabled"; > - }; > - > - vpu: video-codec@fdea0400 { > - compatible = "rockchip,rk3568-vpu"; > - reg = <0x0 0xfdea0000 0x0 0x800>; > - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; > - clock-names = "aclk", "hclk"; > - iommus = <&vdpu_mmu>; > - power-domains = <&power RK3568_PD_VPU>; > - }; > - > - vdpu_mmu: iommu@fdea0800 { > - compatible = "rockchip,rk3568-iommu"; > - reg = <0x0 0xfdea0800 0x0 0x40>; > - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; > - clock-names = "aclk", "iface"; > - clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; > - power-domains = <&power RK3568_PD_VPU>; > - #iommu-cells = <0>; > - }; > - > - rga: rga@fdeb0000 { > - compatible = "rockchip,rk3568-rga", "rockchip,rk3288-rga"; > - reg = <0x0 0xfdeb0000 0x0 0x180>; > - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru CLK_RGA_CORE>; > - clock-names = "aclk", "hclk", "sclk"; > - resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; > - reset-names = "core", "axi", "ahb"; > - power-domains = <&power RK3568_PD_RGA>; > - }; > - > - vepu: video-codec@fdee0000 { > - compatible = "rockchip,rk3568-vepu"; > - reg = <0x0 0xfdee0000 0x0 0x800>; > - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>; > - clock-names = "aclk", "hclk"; > - iommus = <&vepu_mmu>; > - power-domains = <&power RK3568_PD_RGA>; > - }; > - > - vepu_mmu: iommu@fdee0800 { > - compatible = "rockchip,rk3568-iommu"; > - reg = <0x0 0xfdee0800 0x0 0x40>; > - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>; > - clock-names = "aclk", "iface"; > - power-domains = <&power RK3568_PD_RGA>; > - #iommu-cells = <0>; > - }; > - > - sdmmc2: mmc@fe000000 { > - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; > - reg = <0x0 0xfe000000 0x0 0x4000>; > - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>, > - <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>; > - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; > - fifo-depth = <0x100>; > - max-frequency = <150000000>; > - resets = <&cru SRST_SDMMC2>; > - reset-names = "reset"; > - status = "disabled"; > - }; > - > - gmac1: ethernet@fe010000 { > - compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; > - reg = <0x0 0xfe010000 0x0 0x10000>; > - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "macirq", "eth_wake_irq"; > - clocks = <&cru SCLK_GMAC1>, <&cru SCLK_GMAC1_RX_TX>, > - <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_MAC1_REFOUT>, > - <&cru ACLK_GMAC1>, <&cru PCLK_GMAC1>, > - <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_GMAC1_PTP_REF>; > - clock-names = "stmmaceth", "mac_clk_rx", > - "mac_clk_tx", "clk_mac_refout", > - "aclk_mac", "pclk_mac", > - "clk_mac_speed", "ptp_ref"; > - resets = <&cru SRST_A_GMAC1>; > - reset-names = "stmmaceth"; > - rockchip,grf = <&grf>; > - snps,axi-config = <&gmac1_stmmac_axi_setup>; > - snps,mixed-burst; > - snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; > - snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; > - snps,tso; > - status = "disabled"; > - > - mdio1: mdio { > - compatible = "snps,dwmac-mdio"; > - #address-cells = <0x1>; > - #size-cells = <0x0>; > - }; > - > - gmac1_stmmac_axi_setup: stmmac-axi-config { > - snps,blen = <0 0 0 0 16 8 4>; > - snps,rd_osr_lmt = <8>; > - snps,wr_osr_lmt = <4>; > - }; > - > - gmac1_mtl_rx_setup: rx-queues-config { > - snps,rx-queues-to-use = <1>; > - queue0 {}; > - }; > - > - gmac1_mtl_tx_setup: tx-queues-config { > - snps,tx-queues-to-use = <1>; > - queue0 {}; > - }; > - }; > - > - vop: vop@fe040000 { > - reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>; > - reg-names = "vop", "gamma-lut"; > - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>, > - <&cru DCLK_VOP1>, <&cru DCLK_VOP2>; > - clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2"; > - iommus = <&vop_mmu>; > - power-domains = <&power RK3568_PD_VO>; > - rockchip,grf = <&grf>; > - status = "disabled"; > - > - vop_out: ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - vp0: port@0 { > - reg = <0>; > - #address-cells = <1>; > - #size-cells = <0>; > - }; > - > - vp1: port@1 { > - reg = <1>; > - #address-cells = <1>; > - #size-cells = <0>; > - }; > - > - vp2: port@2 { > - reg = <2>; > - #address-cells = <1>; > - #size-cells = <0>; > - }; > - }; > - }; > - > - vop_mmu: iommu@fe043e00 { > - compatible = "rockchip,rk3568-iommu"; > - reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>; > - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; > - clock-names = "aclk", "iface"; > - #iommu-cells = <0>; > - status = "disabled"; > - }; > - > - dsi0: dsi@fe060000 { > - compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; > - reg = <0x00 0xfe060000 0x00 0x10000>; > - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; > - clock-names = "pclk"; > - clocks = <&cru PCLK_DSITX_0>; > - phy-names = "dphy"; > - phys = <&dsi_dphy0>; > - power-domains = <&power RK3568_PD_VO>; > - reset-names = "apb"; > - resets = <&cru SRST_P_DSITX_0>; > - rockchip,grf = <&grf>; > - status = "disabled"; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - dsi0_in: port@0 { > - reg = <0>; > - }; > - > - dsi0_out: port@1 { > - reg = <1>; > - }; > - }; > - }; > - > - dsi1: dsi@fe070000 { > - compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; > - reg = <0x0 0xfe070000 0x0 0x10000>; > - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; > - clock-names = "pclk"; > - clocks = <&cru PCLK_DSITX_1>; > - phy-names = "dphy"; > - phys = <&dsi_dphy1>; > - power-domains = <&power RK3568_PD_VO>; > - reset-names = "apb"; > - resets = <&cru SRST_P_DSITX_1>; > - rockchip,grf = <&grf>; > - status = "disabled"; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - dsi1_in: port@0 { > - reg = <0>; > - }; > - > - dsi1_out: port@1 { > - reg = <1>; > - }; > - }; > - }; > - > - hdmi: hdmi@fe0a0000 { > - compatible = "rockchip,rk3568-dw-hdmi"; > - reg = <0x0 0xfe0a0000 0x0 0x20000>; > - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru PCLK_HDMI_HOST>, > - <&cru CLK_HDMI_SFR>, > - <&cru CLK_HDMI_CEC>, > - <&pmucru CLK_HDMI_REF>, > - <&cru HCLK_VO>; > - clock-names = "iahb", "isfr", "cec", "ref"; > - pinctrl-names = "default"; > - pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>; > - power-domains = <&power RK3568_PD_VO>; > - reg-io-width = <4>; > - rockchip,grf = <&grf>; > - #sound-dai-cells = <0>; > - status = "disabled"; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - hdmi_in: port@0 { > - reg = <0>; > - }; > - > - hdmi_out: port@1 { > - reg = <1>; > - }; > - }; > - }; > - > - qos_gpu: qos@fe128000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe128000 0x0 0x20>; > - }; > - > - qos_rkvenc_rd_m0: qos@fe138080 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe138080 0x0 0x20>; > - }; > - > - qos_rkvenc_rd_m1: qos@fe138100 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe138100 0x0 0x20>; > - }; > - > - qos_rkvenc_wr_m0: qos@fe138180 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe138180 0x0 0x20>; > - }; > - > - qos_isp: qos@fe148000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe148000 0x0 0x20>; > - }; > - > - qos_vicap0: qos@fe148080 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe148080 0x0 0x20>; > - }; > - > - qos_vicap1: qos@fe148100 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe148100 0x0 0x20>; > - }; > - > - qos_vpu: qos@fe150000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe150000 0x0 0x20>; > - }; > - > - qos_ebc: qos@fe158000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe158000 0x0 0x20>; > - }; > - > - qos_iep: qos@fe158100 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe158100 0x0 0x20>; > - }; > - > - qos_jpeg_dec: qos@fe158180 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe158180 0x0 0x20>; > - }; > - > - qos_jpeg_enc: qos@fe158200 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe158200 0x0 0x20>; > - }; > - > - qos_rga_rd: qos@fe158280 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe158280 0x0 0x20>; > - }; > - > - qos_rga_wr: qos@fe158300 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe158300 0x0 0x20>; > - }; > - > - qos_npu: qos@fe180000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe180000 0x0 0x20>; > - }; > - > - qos_pcie2x1: qos@fe190000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190000 0x0 0x20>; > - }; > - > - qos_sata1: qos@fe190280 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190280 0x0 0x20>; > - }; > - > - qos_sata2: qos@fe190300 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190300 0x0 0x20>; > - }; > - > - qos_usb3_0: qos@fe190380 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190380 0x0 0x20>; > - }; > - > - qos_usb3_1: qos@fe190400 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe190400 0x0 0x20>; > - }; > - > - qos_rkvdec: qos@fe198000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe198000 0x0 0x20>; > - }; > - > - qos_hdcp: qos@fe1a8000 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe1a8000 0x0 0x20>; > - }; > - > - qos_vop_m0: qos@fe1a8080 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe1a8080 0x0 0x20>; > - }; > - > - qos_vop_m1: qos@fe1a8100 { > - compatible = "rockchip,rk3568-qos", "syscon"; > - reg = <0x0 0xfe1a8100 0x0 0x20>; > - }; > - > - dfi: dfi@fe230000 { > - compatible = "rockchip,rk3568-dfi"; > - reg = <0x00 0xfe230000 0x00 0x400>; > - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > - rockchip,pmu = <&pmugrf>; > - }; > - > - pcie2x1: pcie@fe260000 { > - compatible = "rockchip,rk3568-pcie"; > - reg = <0x3 0xc0000000 0x0 0x00400000>, > - <0x0 0xfe260000 0x0 0x00010000>, > - <0x0 0xf4000000 0x0 0x00100000>; > - reg-names = "dbi", "apb", "config"; > - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; > - bus-range = <0x0 0xf>; > - clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>, > - <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>, > - <&cru CLK_PCIE20_AUX_NDFT>; > - clock-names = "aclk_mst", "aclk_slv", > - "aclk_dbi", "pclk", "aux"; > - device_type = "pci"; > - #interrupt-cells = <1>; > - interrupt-map-mask = <0 0 0 7>; > - interrupt-map = <0 0 0 1 &pcie_intc 0>, > - <0 0 0 2 &pcie_intc 1>, > - <0 0 0 3 &pcie_intc 2>, > - <0 0 0 4 &pcie_intc 3>; > - linux,pci-domain = <0>; > - num-ib-windows = <6>; > - num-ob-windows = <2>; > - max-link-speed = <2>; > - msi-map = <0x0 &gic 0x0 0x1000>; > - num-lanes = <1>; > - phys = <&combphy2 PHY_TYPE_PCIE>; > - phy-names = "pcie-phy"; > - power-domains = <&power RK3568_PD_PIPE>; > - ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>, > - <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x01e00000>, > - <0x03000000 0x0 0x40000000 0x3 0x00000000 0x0 0x40000000>; > - resets = <&cru SRST_PCIE20_POWERUP>; > - reset-names = "pipe"; > - #address-cells = <3>; > - #size-cells = <2>; > - status = "disabled"; > - > - pcie_intc: legacy-interrupt-controller { > - #address-cells = <0>; > - #interrupt-cells = <1>; > - interrupt-controller; > - interrupt-parent = <&gic>; > - interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; > - }; > - }; > - > - sdmmc0: mmc@fe2b0000 { > - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; > - reg = <0x0 0xfe2b0000 0x0 0x4000>; > - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>, > - <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>; > - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; > - fifo-depth = <0x100>; > - max-frequency = <150000000>; > - resets = <&cru SRST_SDMMC0>; > - reset-names = "reset"; > - status = "disabled"; > - }; > - > - sdmmc1: mmc@fe2c0000 { > - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; > - reg = <0x0 0xfe2c0000 0x0 0x4000>; > - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>, > - <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>; > - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; > - fifo-depth = <0x100>; > - max-frequency = <150000000>; > - resets = <&cru SRST_SDMMC1>; > - reset-names = "reset"; > - status = "disabled"; > - }; > - > - sfc: spi@fe300000 { > - compatible = "rockchip,sfc"; > - reg = <0x0 0xfe300000 0x0 0x4000>; > - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; > - clock-names = "clk_sfc", "hclk_sfc"; > - pinctrl-0 = <&fspi_pins>; > - pinctrl-names = "default"; > - status = "disabled"; > - }; > - > - sdhci: mmc@fe310000 { > - compatible = "rockchip,rk3568-dwcmshc"; > - reg = <0x0 0xfe310000 0x0 0x10000>; > - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > - assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>; > - assigned-clock-rates = <200000000>, <24000000>; > - clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>, > - <&cru ACLK_EMMC>, <&cru BCLK_EMMC>, > - <&cru TCLK_EMMC>; > - clock-names = "core", "bus", "axi", "block", "timer"; > - status = "disabled"; > - }; > - > - i2s0_8ch: i2s@fe400000 { > - compatible = "rockchip,rk3568-i2s-tdm"; > - reg = <0x0 0xfe400000 0x0 0x1000>; > - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > - assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; > - assigned-clock-rates = <1188000000>, <1188000000>; > - clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; > - clock-names = "mclk_tx", "mclk_rx", "hclk"; > - dmas = <&dmac1 0>; > - dma-names = "tx"; > - resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; > - reset-names = "tx-m", "rx-m"; > - rockchip,grf = <&grf>; > - #sound-dai-cells = <0>; > - status = "disabled"; > - }; > - > - i2s1_8ch: i2s@fe410000 { > - compatible = "rockchip,rk3568-i2s-tdm"; > - reg = <0x0 0xfe410000 0x0 0x1000>; > - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; > - assigned-clocks = <&cru CLK_I2S1_8CH_TX_SRC>, <&cru CLK_I2S1_8CH_RX_SRC>; > - assigned-clock-rates = <1188000000>, <1188000000>; > - clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, > - <&cru HCLK_I2S1_8CH>; > - clock-names = "mclk_tx", "mclk_rx", "hclk"; > - dmas = <&dmac1 3>, <&dmac1 2>; > - dma-names = "rx", "tx"; > - resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; > - reset-names = "tx-m", "rx-m"; > - rockchip,grf = <&grf>; > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx > - &i2s1m0_lrcktx &i2s1m0_lrckrx > - &i2s1m0_sdi0 &i2s1m0_sdi1 > - &i2s1m0_sdi2 &i2s1m0_sdi3 > - &i2s1m0_sdo0 &i2s1m0_sdo1 > - &i2s1m0_sdo2 &i2s1m0_sdo3>; > - #sound-dai-cells = <0>; > - status = "disabled"; > - }; > - > - i2s2_2ch: i2s@fe420000 { > - compatible = "rockchip,rk3568-i2s-tdm"; > - reg = <0x0 0xfe420000 0x0 0x1000>; > - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; > - assigned-clocks = <&cru CLK_I2S2_2CH_SRC>; > - assigned-clock-rates = <1188000000>; > - clocks = <&cru MCLK_I2S2_2CH>, <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>; > - clock-names = "mclk_tx", "mclk_rx", "hclk"; > - dmas = <&dmac1 4>, <&dmac1 5>; > - dma-names = "tx", "rx"; > - resets = <&cru SRST_M_I2S2_2CH>; > - reset-names = "m"; > - rockchip,grf = <&grf>; > - pinctrl-names = "default"; > - pinctrl-0 = <&i2s2m0_sclktx > - &i2s2m0_lrcktx > - &i2s2m0_sdi > - &i2s2m0_sdo>; > - #sound-dai-cells = <0>; > - status = "disabled"; > - }; > - > - i2s3_2ch: i2s@fe430000 { > - compatible = "rockchip,rk3568-i2s-tdm"; > - reg = <0x0 0xfe430000 0x0 0x1000>; > - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru MCLK_I2S3_2CH_TX>, <&cru MCLK_I2S3_2CH_RX>, > - <&cru HCLK_I2S3_2CH>; > - clock-names = "mclk_tx", "mclk_rx", "hclk"; > - dmas = <&dmac1 6>, <&dmac1 7>; > - dma-names = "tx", "rx"; > - resets = <&cru SRST_M_I2S3_2CH_TX>, <&cru SRST_M_I2S3_2CH_RX>; > - reset-names = "tx-m", "rx-m"; > - rockchip,grf = <&grf>; > - #sound-dai-cells = <0>; > - status = "disabled"; > - }; > - > - pdm: pdm@fe440000 { > - compatible = "rockchip,rk3568-pdm"; > - reg = <0x0 0xfe440000 0x0 0x1000>; > - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru MCLK_PDM>, <&cru HCLK_PDM>; > - clock-names = "pdm_clk", "pdm_hclk"; > - dmas = <&dmac1 9>; > - dma-names = "rx"; > - pinctrl-0 = <&pdmm0_clk > - &pdmm0_clk1 > - &pdmm0_sdi0 > - &pdmm0_sdi1 > - &pdmm0_sdi2 > - &pdmm0_sdi3>; > - pinctrl-names = "default"; > - resets = <&cru SRST_M_PDM>; > - reset-names = "pdm-m"; > - #sound-dai-cells = <0>; > - status = "disabled"; > - }; > - > - spdif: spdif@fe460000 { > - compatible = "rockchip,rk3568-spdif"; > - reg = <0x0 0xfe460000 0x0 0x1000>; > - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; > - clock-names = "mclk", "hclk"; > - clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>; > - dmas = <&dmac1 1>; > - dma-names = "tx"; > - pinctrl-names = "default"; > - pinctrl-0 = <&spdifm0_tx>; > - #sound-dai-cells = <0>; > - status = "disabled"; > - }; > - > - dmac0: dma-controller@fe530000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x0 0xfe530000 0x0 0x4000>; > - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > - arm,pl330-periph-burst; > - clocks = <&cru ACLK_BUS>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - }; > - > - dmac1: dma-controller@fe550000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x0 0xfe550000 0x0 0x4000>; > - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; > - arm,pl330-periph-burst; > - clocks = <&cru ACLK_BUS>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - }; > - > - i2c1: i2c@fe5a0000 { > - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; > - reg = <0x0 0xfe5a0000 0x0 0x1000>; > - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; > - clock-names = "i2c", "pclk"; > - pinctrl-0 = <&i2c1_xfer>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c2: i2c@fe5b0000 { > - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; > - reg = <0x0 0xfe5b0000 0x0 0x1000>; > - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; > - clock-names = "i2c", "pclk"; > - pinctrl-0 = <&i2c2m0_xfer>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c3: i2c@fe5c0000 { > - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; > - reg = <0x0 0xfe5c0000 0x0 0x1000>; > - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; > - clock-names = "i2c", "pclk"; > - pinctrl-0 = <&i2c3m0_xfer>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c4: i2c@fe5d0000 { > - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; > - reg = <0x0 0xfe5d0000 0x0 0x1000>; > - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>; > - clock-names = "i2c", "pclk"; > - pinctrl-0 = <&i2c4m0_xfer>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c5: i2c@fe5e0000 { > - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; > - reg = <0x0 0xfe5e0000 0x0 0x1000>; > - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>; > - clock-names = "i2c", "pclk"; > - pinctrl-0 = <&i2c5m0_xfer>; > - pinctrl-names = "default"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - wdt: watchdog@fe600000 { > - compatible = "rockchip,rk3568-wdt", "snps,dw-wdt"; > - reg = <0x0 0xfe600000 0x0 0x100>; > - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>; > - clock-names = "tclk", "pclk"; > - }; > - > - spi0: spi@fe610000 { > - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi"; > - reg = <0x0 0xfe610000 0x0 0x1000>; > - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>; > - clock-names = "spiclk", "apb_pclk"; > - dmas = <&dmac0 20>, <&dmac0 21>; > - dma-names = "tx", "rx"; > - pinctrl-names = "default"; > - pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - spi1: spi@fe620000 { > - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi"; > - reg = <0x0 0xfe620000 0x0 0x1000>; > - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>; > - clock-names = "spiclk", "apb_pclk"; > - dmas = <&dmac0 22>, <&dmac0 23>; > - dma-names = "tx", "rx"; > - pinctrl-names = "default"; > - pinctrl-0 = <&spi1m0_cs0 &spi1m0_cs1 &spi1m0_pins>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - spi2: spi@fe630000 { > - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi"; > - reg = <0x0 0xfe630000 0x0 0x1000>; > - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>; > - clock-names = "spiclk", "apb_pclk"; > - dmas = <&dmac0 24>, <&dmac0 25>; > - dma-names = "tx", "rx"; > - pinctrl-names = "default"; > - pinctrl-0 = <&spi2m0_cs0 &spi2m0_cs1 &spi2m0_pins>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - spi3: spi@fe640000 { > - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi"; > - reg = <0x0 0xfe640000 0x0 0x1000>; > - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>; > - clock-names = "spiclk", "apb_pclk"; > - dmas = <&dmac0 26>, <&dmac0 27>; > - dma-names = "tx", "rx"; > - pinctrl-names = "default"; > - pinctrl-0 = <&spi3m0_cs0 &spi3m0_cs1 &spi3m0_pins>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - uart1: serial@fe650000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe650000 0x0 0x100>; > - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 2>, <&dmac0 3>; > - pinctrl-0 = <&uart1m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart2: serial@fe660000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe660000 0x0 0x100>; > - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 4>, <&dmac0 5>; > - pinctrl-0 = <&uart2m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart3: serial@fe670000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe670000 0x0 0x100>; > - interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 6>, <&dmac0 7>; > - pinctrl-0 = <&uart3m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart4: serial@fe680000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe680000 0x0 0x100>; > - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 8>, <&dmac0 9>; > - pinctrl-0 = <&uart4m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart5: serial@fe690000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe690000 0x0 0x100>; > - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 10>, <&dmac0 11>; > - pinctrl-0 = <&uart5m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart6: serial@fe6a0000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe6a0000 0x0 0x100>; > - interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 12>, <&dmac0 13>; > - pinctrl-0 = <&uart6m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart7: serial@fe6b0000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe6b0000 0x0 0x100>; > - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 14>, <&dmac0 15>; > - pinctrl-0 = <&uart7m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart8: serial@fe6c0000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe6c0000 0x0 0x100>; > - interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 16>, <&dmac0 17>; > - pinctrl-0 = <&uart8m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart9: serial@fe6d0000 { > - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; > - reg = <0x0 0xfe6d0000 0x0 0x100>; > - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>; > - clock-names = "baudclk", "apb_pclk"; > - dmas = <&dmac0 18>, <&dmac0 19>; > - pinctrl-0 = <&uart9m0_xfer>; > - pinctrl-names = "default"; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - thermal_zones: thermal-zones { > - cpu_thermal: cpu-thermal { > - polling-delay-passive = <100>; > - polling-delay = <1000>; > - > - thermal-sensors = <&tsadc 0>; > - > - trips { > - cpu_alert0: cpu_alert0 { > - temperature = <70000>; > - hysteresis = <2000>; > - type = "passive"; > - }; > - cpu_alert1: cpu_alert1 { > - temperature = <75000>; > - hysteresis = <2000>; > - type = "passive"; > - }; > - cpu_crit: cpu_crit { > - temperature = <95000>; > - hysteresis = <2000>; > - type = "critical"; > - }; > - }; > - > - cooling-maps { > - map0 { > - trip = <&cpu_alert0>; > - cooling-device = > - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > - }; > - > - gpu_thermal: gpu-thermal { > - polling-delay-passive = <20>; /* milliseconds */ > - polling-delay = <1000>; /* milliseconds */ > - > - thermal-sensors = <&tsadc 1>; > - > - trips { > - gpu_threshold: gpu-threshold { > - temperature = <70000>; > - hysteresis = <2000>; > - type = "passive"; > - }; > - gpu_target: gpu-target { > - temperature = <75000>; > - hysteresis = <2000>; > - type = "passive"; > - }; > - gpu_crit: gpu-crit { > - temperature = <95000>; > - hysteresis = <2000>; > - type = "critical"; > - }; > - }; > - > - cooling-maps { > - map0 { > - trip = <&gpu_target>; > - cooling-device = > - <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > - }; > - }; > - > - tsadc: tsadc@fe710000 { > - compatible = "rockchip,rk3568-tsadc"; > - reg = <0x0 0xfe710000 0x0 0x100>; > - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; > - assigned-clocks = <&cru CLK_TSADC_TSEN>, <&cru CLK_TSADC>; > - assigned-clock-rates = <17000000>, <700000>; > - clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; > - clock-names = "tsadc", "apb_pclk"; > - resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>, > - <&cru SRST_TSADCPHY>; > - rockchip,grf = <&grf>; > - rockchip,hw-tshut-temp = <95000>; > - pinctrl-names = "init", "default", "sleep"; > - pinctrl-0 = <&tsadc_pin>; > - pinctrl-1 = <&tsadc_shutorg>; > - pinctrl-2 = <&tsadc_pin>; > - #thermal-sensor-cells = <1>; > - status = "disabled"; > - }; > - > - saradc: saradc@fe720000 { > - compatible = "rockchip,rk3568-saradc", "rockchip,rk3399-saradc"; > - reg = <0x0 0xfe720000 0x0 0x100>; > - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; > - clock-names = "saradc", "apb_pclk"; > - resets = <&cru SRST_P_SARADC>; > - reset-names = "saradc-apb"; > - #io-channel-cells = <1>; > - status = "disabled"; > - }; > - > - pwm4: pwm@fe6e0000 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6e0000 0x0 0x10>; > - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm4_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm5: pwm@fe6e0010 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6e0010 0x0 0x10>; > - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm5_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm6: pwm@fe6e0020 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6e0020 0x0 0x10>; > - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm6_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm7: pwm@fe6e0030 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6e0030 0x0 0x10>; > - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm7_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm8: pwm@fe6f0000 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6f0000 0x0 0x10>; > - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm8m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm9: pwm@fe6f0010 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6f0010 0x0 0x10>; > - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm9m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm10: pwm@fe6f0020 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6f0020 0x0 0x10>; > - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm10m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm11: pwm@fe6f0030 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe6f0030 0x0 0x10>; > - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm11m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm12: pwm@fe700000 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe700000 0x0 0x10>; > - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm12m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm13: pwm@fe700010 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe700010 0x0 0x10>; > - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm13m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm14: pwm@fe700020 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe700020 0x0 0x10>; > - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm14m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - pwm15: pwm@fe700030 { > - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; > - reg = <0x0 0xfe700030 0x0 0x10>; > - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; > - clock-names = "pwm", "pclk"; > - pinctrl-0 = <&pwm15m0_pins>; > - pinctrl-names = "default"; > - #pwm-cells = <3>; > - status = "disabled"; > - }; > - > - combphy1: phy@fe830000 { > - compatible = "rockchip,rk3568-naneng-combphy"; > - reg = <0x0 0xfe830000 0x0 0x100>; > - clocks = <&pmucru CLK_PCIEPHY1_REF>, > - <&cru PCLK_PIPEPHY1>, > - <&cru PCLK_PIPE>; > - clock-names = "ref", "apb", "pipe"; > - assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>; > - assigned-clock-rates = <100000000>; > - resets = <&cru SRST_PIPEPHY1>; > - rockchip,pipe-grf = <&pipegrf>; > - rockchip,pipe-phy-grf = <&pipe_phy_grf1>; > - #phy-cells = <1>; > - status = "disabled"; > - }; > - > - combphy2: phy@fe840000 { > - compatible = "rockchip,rk3568-naneng-combphy"; > - reg = <0x0 0xfe840000 0x0 0x100>; > - clocks = <&pmucru CLK_PCIEPHY2_REF>, > - <&cru PCLK_PIPEPHY2>, > - <&cru PCLK_PIPE>; > - clock-names = "ref", "apb", "pipe"; > - assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>; > - assigned-clock-rates = <100000000>; > - resets = <&cru SRST_PIPEPHY2>; > - rockchip,pipe-grf = <&pipegrf>; > - rockchip,pipe-phy-grf = <&pipe_phy_grf2>; > - #phy-cells = <1>; > - status = "disabled"; > - }; > - > - csi_dphy: phy@fe870000 { > - compatible = "rockchip,rk3568-csi-dphy"; > - reg = <0x0 0xfe870000 0x0 0x10000>; > - clocks = <&cru PCLK_MIPICSIPHY>; > - clock-names = "pclk"; > - #phy-cells = <0>; > - resets = <&cru SRST_P_MIPICSIPHY>; > - reset-names = "apb"; > - rockchip,grf = <&grf>; > - status = "disabled"; > - }; > - > - dsi_dphy0: mipi-dphy@fe850000 { > - compatible = "rockchip,rk3568-dsi-dphy"; > - reg = <0x0 0xfe850000 0x0 0x10000>; > - clock-names = "ref", "pclk"; > - clocks = <&pmucru CLK_MIPIDSIPHY0_REF>, <&cru PCLK_MIPIDSIPHY0>; > - #phy-cells = <0>; > - power-domains = <&power RK3568_PD_VO>; > - reset-names = "apb"; > - resets = <&cru SRST_P_MIPIDSIPHY0>; > - status = "disabled"; > - }; > - > - dsi_dphy1: mipi-dphy@fe860000 { > - compatible = "rockchip,rk3568-dsi-dphy"; > - reg = <0x0 0xfe860000 0x0 0x10000>; > - clock-names = "ref", "pclk"; > - clocks = <&pmucru CLK_MIPIDSIPHY1_REF>, <&cru PCLK_MIPIDSIPHY1>; > - #phy-cells = <0>; > - power-domains = <&power RK3568_PD_VO>; > - reset-names = "apb"; > - resets = <&cru SRST_P_MIPIDSIPHY1>; > - status = "disabled"; > - }; > - > - usb2phy0: usb2phy@fe8a0000 { > - compatible = "rockchip,rk3568-usb2phy"; > - reg = <0x0 0xfe8a0000 0x0 0x10000>; > - clocks = <&pmucru CLK_USBPHY0_REF>; > - clock-names = "phyclk"; > - clock-output-names = "clk_usbphy0_480m"; > - interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; > - rockchip,usbgrf = <&usb2phy0_grf>; > - #clock-cells = <0>; > - status = "disabled"; > - > - usb2phy0_host: host-port { > - #phy-cells = <0>; > - status = "disabled"; > - }; > - > - usb2phy0_otg: otg-port { > - #phy-cells = <0>; > - status = "disabled"; > - }; > - }; > - > - usb2phy1: usb2phy@fe8b0000 { > - compatible = "rockchip,rk3568-usb2phy"; > - reg = <0x0 0xfe8b0000 0x0 0x10000>; > - clocks = <&pmucru CLK_USBPHY1_REF>; > - clock-names = "phyclk"; > - clock-output-names = "clk_usbphy1_480m"; > - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; > - rockchip,usbgrf = <&usb2phy1_grf>; > - #clock-cells = <0>; > - status = "disabled"; > - > - usb2phy1_host: host-port { > - #phy-cells = <0>; > - status = "disabled"; > - }; > - > - usb2phy1_otg: otg-port { > - #phy-cells = <0>; > - status = "disabled"; > - }; > - }; > - > - pinctrl: pinctrl { > - compatible = "rockchip,rk3568-pinctrl"; > - rockchip,grf = <&grf>; > - rockchip,pmu = <&pmugrf>; > - #address-cells = <2>; > - #size-cells = <2>; > - ranges; > - > - gpio0: gpio@fdd60000 { > - compatible = "rockchip,gpio-bank"; > - reg = <0x0 0xfdd60000 0x0 0x100>; > - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; > - gpio-controller; > - gpio-ranges = <&pinctrl 0 0 32>; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <2>; > - }; > - > - gpio1: gpio@fe740000 { > - compatible = "rockchip,gpio-bank"; > - reg = <0x0 0xfe740000 0x0 0x100>; > - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; > - gpio-controller; > - gpio-ranges = <&pinctrl 0 32 32>; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <2>; > - }; > - > - gpio2: gpio@fe750000 { > - compatible = "rockchip,gpio-bank"; > - reg = <0x0 0xfe750000 0x0 0x100>; > - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; > - gpio-controller; > - gpio-ranges = <&pinctrl 0 64 32>; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <2>; > - }; > - > - gpio3: gpio@fe760000 { > - compatible = "rockchip,gpio-bank"; > - reg = <0x0 0xfe760000 0x0 0x100>; > - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; > - gpio-controller; > - gpio-ranges = <&pinctrl 0 96 32>; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <2>; > - }; > - > - gpio4: gpio@fe770000 { > - compatible = "rockchip,gpio-bank"; > - reg = <0x0 0xfe770000 0x0 0x100>; > - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; > - gpio-controller; > - gpio-ranges = <&pinctrl 0 128 32>; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <2>; > - }; > - }; > -}; > - > -#include "rk3568-pinctrl.dtsi" > diff --git a/include/dt-bindings/clock/rk3568-cru.h b/include/dt-bindings/clock/rk3568-cru.h > deleted file mode 100644 > index d29890865150..000000000000 > --- a/include/dt-bindings/clock/rk3568-cru.h > +++ /dev/null > @@ -1,926 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0 */ > -/* > - * Copyright (c) 2021 Rockchip Electronics Co. Ltd. > - * Author: Elaine Zhang <zhangqing@rock-chips.com> > - */ > - > -#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3568_H > -#define _DT_BINDINGS_CLK_ROCKCHIP_RK3568_H > - > -/* pmucru-clocks indices */ > - > -/* pmucru plls */ > -#define PLL_PPLL 1 > -#define PLL_HPLL 2 > - > -/* pmucru clocks */ > -#define XIN_OSC0_DIV 4 > -#define CLK_RTC_32K 5 > -#define CLK_PMU 6 > -#define CLK_I2C0 7 > -#define CLK_RTC32K_FRAC 8 > -#define CLK_UART0_DIV 9 > -#define CLK_UART0_FRAC 10 > -#define SCLK_UART0 11 > -#define DBCLK_GPIO0 12 > -#define CLK_PWM0 13 > -#define CLK_CAPTURE_PWM0_NDFT 14 > -#define CLK_PMUPVTM 15 > -#define CLK_CORE_PMUPVTM 16 > -#define CLK_REF24M 17 > -#define XIN_OSC0_USBPHY0_G 18 > -#define CLK_USBPHY0_REF 19 > -#define XIN_OSC0_USBPHY1_G 20 > -#define CLK_USBPHY1_REF 21 > -#define XIN_OSC0_MIPIDSIPHY0_G 22 > -#define CLK_MIPIDSIPHY0_REF 23 > -#define XIN_OSC0_MIPIDSIPHY1_G 24 > -#define CLK_MIPIDSIPHY1_REF 25 > -#define CLK_WIFI_DIV 26 > -#define CLK_WIFI_OSC0 27 > -#define CLK_WIFI 28 > -#define CLK_PCIEPHY0_DIV 29 > -#define CLK_PCIEPHY0_OSC0 30 > -#define CLK_PCIEPHY0_REF 31 > -#define CLK_PCIEPHY1_DIV 32 > -#define CLK_PCIEPHY1_OSC0 33 > -#define CLK_PCIEPHY1_REF 34 > -#define CLK_PCIEPHY2_DIV 35 > -#define CLK_PCIEPHY2_OSC0 36 > -#define CLK_PCIEPHY2_REF 37 > -#define CLK_PCIE30PHY_REF_M 38 > -#define CLK_PCIE30PHY_REF_N 39 > -#define CLK_HDMI_REF 40 > -#define XIN_OSC0_EDPPHY_G 41 > -#define PCLK_PDPMU 42 > -#define PCLK_PMU 43 > -#define PCLK_UART0 44 > -#define PCLK_I2C0 45 > -#define PCLK_GPIO0 46 > -#define PCLK_PMUPVTM 47 > -#define PCLK_PWM0 48 > -#define CLK_PDPMU 49 > -#define SCLK_32K_IOE 50 > - > -#define CLKPMU_NR_CLKS (SCLK_32K_IOE + 1) > - > -/* cru-clocks indices */ > - > -/* cru plls */ > -#define PLL_APLL 1 > -#define PLL_DPLL 2 > -#define PLL_CPLL 3 > -#define PLL_GPLL 4 > -#define PLL_VPLL 5 > -#define PLL_NPLL 6 > - > -/* cru clocks */ > -#define CPLL_333M 9 > -#define ARMCLK 10 > -#define USB480M 11 > -#define ACLK_CORE_NIU2BUS 18 > -#define CLK_CORE_PVTM 19 > -#define CLK_CORE_PVTM_CORE 20 > -#define CLK_CORE_PVTPLL 21 > -#define CLK_GPU_SRC 22 > -#define CLK_GPU_PRE_NDFT 23 > -#define CLK_GPU_PRE_MUX 24 > -#define ACLK_GPU_PRE 25 > -#define PCLK_GPU_PRE 26 > -#define CLK_GPU 27 > -#define CLK_GPU_NP5 28 > -#define PCLK_GPU_PVTM 29 > -#define CLK_GPU_PVTM 30 > -#define CLK_GPU_PVTM_CORE 31 > -#define CLK_GPU_PVTPLL 32 > -#define CLK_NPU_SRC 33 > -#define CLK_NPU_PRE_NDFT 34 > -#define CLK_NPU 35 > -#define CLK_NPU_NP5 36 > -#define HCLK_NPU_PRE 37 > -#define PCLK_NPU_PRE 38 > -#define ACLK_NPU_PRE 39 > -#define ACLK_NPU 40 > -#define HCLK_NPU 41 > -#define PCLK_NPU_PVTM 42 > -#define CLK_NPU_PVTM 43 > -#define CLK_NPU_PVTM_CORE 44 > -#define CLK_NPU_PVTPLL 45 > -#define CLK_DDRPHY1X_SRC 46 > -#define CLK_DDRPHY1X_HWFFC_SRC 47 > -#define CLK_DDR1X 48 > -#define CLK_MSCH 49 > -#define CLK24_DDRMON 50 > -#define ACLK_GIC_AUDIO 51 > -#define HCLK_GIC_AUDIO 52 > -#define HCLK_SDMMC_BUFFER 53 > -#define DCLK_SDMMC_BUFFER 54 > -#define ACLK_GIC600 55 > -#define ACLK_SPINLOCK 56 > -#define HCLK_I2S0_8CH 57 > -#define HCLK_I2S1_8CH 58 > -#define HCLK_I2S2_2CH 59 > -#define HCLK_I2S3_2CH 60 > -#define CLK_I2S0_8CH_TX_SRC 61 > -#define CLK_I2S0_8CH_TX_FRAC 62 > -#define MCLK_I2S0_8CH_TX 63 > -#define I2S0_MCLKOUT_TX 64 > -#define CLK_I2S0_8CH_RX_SRC 65 > -#define CLK_I2S0_8CH_RX_FRAC 66 > -#define MCLK_I2S0_8CH_RX 67 > -#define I2S0_MCLKOUT_RX 68 > -#define CLK_I2S1_8CH_TX_SRC 69 > -#define CLK_I2S1_8CH_TX_FRAC 70 > -#define MCLK_I2S1_8CH_TX 71 > -#define I2S1_MCLKOUT_TX 72 > -#define CLK_I2S1_8CH_RX_SRC 73 > -#define CLK_I2S1_8CH_RX_FRAC 74 > -#define MCLK_I2S1_8CH_RX 75 > -#define I2S1_MCLKOUT_RX 76 > -#define CLK_I2S2_2CH_SRC 77 > -#define CLK_I2S2_2CH_FRAC 78 > -#define MCLK_I2S2_2CH 79 > -#define I2S2_MCLKOUT 80 > -#define CLK_I2S3_2CH_TX_SRC 81 > -#define CLK_I2S3_2CH_TX_FRAC 82 > -#define MCLK_I2S3_2CH_TX 83 > -#define I2S3_MCLKOUT_TX 84 > -#define CLK_I2S3_2CH_RX_SRC 85 > -#define CLK_I2S3_2CH_RX_FRAC 86 > -#define MCLK_I2S3_2CH_RX 87 > -#define I2S3_MCLKOUT_RX 88 > -#define HCLK_PDM 89 > -#define MCLK_PDM 90 > -#define HCLK_VAD 91 > -#define HCLK_SPDIF_8CH 92 > -#define MCLK_SPDIF_8CH_SRC 93 > -#define MCLK_SPDIF_8CH_FRAC 94 > -#define MCLK_SPDIF_8CH 95 > -#define HCLK_AUDPWM 96 > -#define SCLK_AUDPWM_SRC 97 > -#define SCLK_AUDPWM_FRAC 98 > -#define SCLK_AUDPWM 99 > -#define HCLK_ACDCDIG 100 > -#define CLK_ACDCDIG_I2C 101 > -#define CLK_ACDCDIG_DAC 102 > -#define CLK_ACDCDIG_ADC 103 > -#define ACLK_SECURE_FLASH 104 > -#define HCLK_SECURE_FLASH 105 > -#define ACLK_CRYPTO_NS 106 > -#define HCLK_CRYPTO_NS 107 > -#define CLK_CRYPTO_NS_CORE 108 > -#define CLK_CRYPTO_NS_PKA 109 > -#define CLK_CRYPTO_NS_RNG 110 > -#define HCLK_TRNG_NS 111 > -#define CLK_TRNG_NS 112 > -#define PCLK_OTPC_NS 113 > -#define CLK_OTPC_NS_SBPI 114 > -#define CLK_OTPC_NS_USR 115 > -#define HCLK_NANDC 116 > -#define NCLK_NANDC 117 > -#define HCLK_SFC 118 > -#define HCLK_SFC_XIP 119 > -#define SCLK_SFC 120 > -#define ACLK_EMMC 121 > -#define HCLK_EMMC 122 > -#define BCLK_EMMC 123 > -#define CCLK_EMMC 124 > -#define TCLK_EMMC 125 > -#define ACLK_PIPE 126 > -#define PCLK_PIPE 127 > -#define PCLK_PIPE_GRF 128 > -#define ACLK_PCIE20_MST 129 > -#define ACLK_PCIE20_SLV 130 > -#define ACLK_PCIE20_DBI 131 > -#define PCLK_PCIE20 132 > -#define CLK_PCIE20_AUX_NDFT 133 > -#define CLK_PCIE20_AUX_DFT 134 > -#define CLK_PCIE20_PIPE_DFT 135 > -#define ACLK_PCIE30X1_MST 136 > -#define ACLK_PCIE30X1_SLV 137 > -#define ACLK_PCIE30X1_DBI 138 > -#define PCLK_PCIE30X1 139 > -#define CLK_PCIE30X1_AUX_NDFT 140 > -#define CLK_PCIE30X1_AUX_DFT 141 > -#define CLK_PCIE30X1_PIPE_DFT 142 > -#define ACLK_PCIE30X2_MST 143 > -#define ACLK_PCIE30X2_SLV 144 > -#define ACLK_PCIE30X2_DBI 145 > -#define PCLK_PCIE30X2 146 > -#define CLK_PCIE30X2_AUX_NDFT 147 > -#define CLK_PCIE30X2_AUX_DFT 148 > -#define CLK_PCIE30X2_PIPE_DFT 149 > -#define ACLK_SATA0 150 > -#define CLK_SATA0_PMALIVE 151 > -#define CLK_SATA0_RXOOB 152 > -#define CLK_SATA0_PIPE_NDFT 153 > -#define CLK_SATA0_PIPE_DFT 154 > -#define ACLK_SATA1 155 > -#define CLK_SATA1_PMALIVE 156 > -#define CLK_SATA1_RXOOB 157 > -#define CLK_SATA1_PIPE_NDFT 158 > -#define CLK_SATA1_PIPE_DFT 159 > -#define ACLK_SATA2 160 > -#define CLK_SATA2_PMALIVE 161 > -#define CLK_SATA2_RXOOB 162 > -#define CLK_SATA2_PIPE_NDFT 163 > -#define CLK_SATA2_PIPE_DFT 164 > -#define ACLK_USB3OTG0 165 > -#define CLK_USB3OTG0_REF 166 > -#define CLK_USB3OTG0_SUSPEND 167 > -#define ACLK_USB3OTG1 168 > -#define CLK_USB3OTG1_REF 169 > -#define CLK_USB3OTG1_SUSPEND 170 > -#define CLK_XPCS_EEE 171 > -#define PCLK_XPCS 172 > -#define ACLK_PHP 173 > -#define HCLK_PHP 174 > -#define PCLK_PHP 175 > -#define HCLK_SDMMC0 176 > -#define CLK_SDMMC0 177 > -#define HCLK_SDMMC1 178 > -#define CLK_SDMMC1 179 > -#define ACLK_GMAC0 180 > -#define PCLK_GMAC0 181 > -#define CLK_MAC0_2TOP 182 > -#define CLK_MAC0_OUT 183 > -#define CLK_MAC0_REFOUT 184 > -#define CLK_GMAC0_PTP_REF 185 > -#define ACLK_USB 186 > -#define HCLK_USB 187 > -#define PCLK_USB 188 > -#define HCLK_USB2HOST0 189 > -#define HCLK_USB2HOST0_ARB 190 > -#define HCLK_USB2HOST1 191 > -#define HCLK_USB2HOST1_ARB 192 > -#define HCLK_SDMMC2 193 > -#define CLK_SDMMC2 194 > -#define ACLK_GMAC1 195 > -#define PCLK_GMAC1 196 > -#define CLK_MAC1_2TOP 197 > -#define CLK_MAC1_OUT 198 > -#define CLK_MAC1_REFOUT 199 > -#define CLK_GMAC1_PTP_REF 200 > -#define ACLK_PERIMID 201 > -#define HCLK_PERIMID 202 > -#define ACLK_VI 203 > -#define HCLK_VI 204 > -#define PCLK_VI 205 > -#define ACLK_VICAP 206 > -#define HCLK_VICAP 207 > -#define DCLK_VICAP 208 > -#define ICLK_VICAP_G 209 > -#define ACLK_ISP 210 > -#define HCLK_ISP 211 > -#define CLK_ISP 212 > -#define PCLK_CSI2HOST1 213 > -#define CLK_CIF_OUT 214 > -#define CLK_CAM0_OUT 215 > -#define CLK_CAM1_OUT 216 > -#define ACLK_VO 217 > -#define HCLK_VO 218 > -#define PCLK_VO 219 > -#define ACLK_VOP_PRE 220 > -#define ACLK_VOP 221 > -#define HCLK_VOP 222 > -#define DCLK_VOP0 223 > -#define DCLK_VOP1 224 > -#define DCLK_VOP2 225 > -#define CLK_VOP_PWM 226 > -#define ACLK_HDCP 227 > -#define HCLK_HDCP 228 > -#define PCLK_HDCP 229 > -#define PCLK_HDMI_HOST 230 > -#define CLK_HDMI_SFR 231 > -#define PCLK_DSITX_0 232 > -#define PCLK_DSITX_1 233 > -#define PCLK_EDP_CTRL 234 > -#define CLK_EDP_200M 235 > -#define ACLK_VPU_PRE 236 > -#define HCLK_VPU_PRE 237 > -#define ACLK_VPU 238 > -#define HCLK_VPU 239 > -#define ACLK_RGA_PRE 240 > -#define HCLK_RGA_PRE 241 > -#define PCLK_RGA_PRE 242 > -#define ACLK_RGA 243 > -#define HCLK_RGA 244 > -#define CLK_RGA_CORE 245 > -#define ACLK_IEP 246 > -#define HCLK_IEP 247 > -#define CLK_IEP_CORE 248 > -#define HCLK_EBC 249 > -#define DCLK_EBC 250 > -#define ACLK_JDEC 251 > -#define HCLK_JDEC 252 > -#define ACLK_JENC 253 > -#define HCLK_JENC 254 > -#define PCLK_EINK 255 > -#define HCLK_EINK 256 > -#define ACLK_RKVENC_PRE 257 > -#define HCLK_RKVENC_PRE 258 > -#define ACLK_RKVENC 259 > -#define HCLK_RKVENC 260 > -#define CLK_RKVENC_CORE 261 > -#define ACLK_RKVDEC_PRE 262 > -#define HCLK_RKVDEC_PRE 263 > -#define ACLK_RKVDEC 264 > -#define HCLK_RKVDEC 265 > -#define CLK_RKVDEC_CA 266 > -#define CLK_RKVDEC_CORE 267 > -#define CLK_RKVDEC_HEVC_CA 268 > -#define ACLK_BUS 269 > -#define PCLK_BUS 270 > -#define PCLK_TSADC 271 > -#define CLK_TSADC_TSEN 272 > -#define CLK_TSADC 273 > -#define PCLK_SARADC 274 > -#define CLK_SARADC 275 > -#define PCLK_SCR 276 > -#define PCLK_WDT_NS 277 > -#define TCLK_WDT_NS 278 > -#define ACLK_DMAC0 279 > -#define ACLK_DMAC1 280 > -#define ACLK_MCU 281 > -#define PCLK_INTMUX 282 > -#define PCLK_MAILBOX 283 > -#define PCLK_UART1 284 > -#define CLK_UART1_SRC 285 > -#define CLK_UART1_FRAC 286 > -#define SCLK_UART1 287 > -#define PCLK_UART2 288 > -#define CLK_UART2_SRC 289 > -#define CLK_UART2_FRAC 290 > -#define SCLK_UART2 291 > -#define PCLK_UART3 292 > -#define CLK_UART3_SRC 293 > -#define CLK_UART3_FRAC 294 > -#define SCLK_UART3 295 > -#define PCLK_UART4 296 > -#define CLK_UART4_SRC 297 > -#define CLK_UART4_FRAC 298 > -#define SCLK_UART4 299 > -#define PCLK_UART5 300 > -#define CLK_UART5_SRC 301 > -#define CLK_UART5_FRAC 302 > -#define SCLK_UART5 303 > -#define PCLK_UART6 304 > -#define CLK_UART6_SRC 305 > -#define CLK_UART6_FRAC 306 > -#define SCLK_UART6 307 > -#define PCLK_UART7 308 > -#define CLK_UART7_SRC 309 > -#define CLK_UART7_FRAC 310 > -#define SCLK_UART7 311 > -#define PCLK_UART8 312 > -#define CLK_UART8_SRC 313 > -#define CLK_UART8_FRAC 314 > -#define SCLK_UART8 315 > -#define PCLK_UART9 316 > -#define CLK_UART9_SRC 317 > -#define CLK_UART9_FRAC 318 > -#define SCLK_UART9 319 > -#define PCLK_CAN0 320 > -#define CLK_CAN0 321 > -#define PCLK_CAN1 322 > -#define CLK_CAN1 323 > -#define PCLK_CAN2 324 > -#define CLK_CAN2 325 > -#define CLK_I2C 326 > -#define PCLK_I2C1 327 > -#define CLK_I2C1 328 > -#define PCLK_I2C2 329 > -#define CLK_I2C2 330 > -#define PCLK_I2C3 331 > -#define CLK_I2C3 332 > -#define PCLK_I2C4 333 > -#define CLK_I2C4 334 > -#define PCLK_I2C5 335 > -#define CLK_I2C5 336 > -#define PCLK_SPI0 337 > -#define CLK_SPI0 338 > -#define PCLK_SPI1 339 > -#define CLK_SPI1 340 > -#define PCLK_SPI2 341 > -#define CLK_SPI2 342 > -#define PCLK_SPI3 343 > -#define CLK_SPI3 344 > -#define PCLK_PWM1 345 > -#define CLK_PWM1 346 > -#define CLK_PWM1_CAPTURE 347 > -#define PCLK_PWM2 348 > -#define CLK_PWM2 349 > -#define CLK_PWM2_CAPTURE 350 > -#define PCLK_PWM3 351 > -#define CLK_PWM3 352 > -#define CLK_PWM3_CAPTURE 353 > -#define DBCLK_GPIO 354 > -#define PCLK_GPIO1 355 > -#define DBCLK_GPIO1 356 > -#define PCLK_GPIO2 357 > -#define DBCLK_GPIO2 358 > -#define PCLK_GPIO3 359 > -#define DBCLK_GPIO3 360 > -#define PCLK_GPIO4 361 > -#define DBCLK_GPIO4 362 > -#define OCC_SCAN_CLK_GPIO 363 > -#define PCLK_TIMER 364 > -#define CLK_TIMER0 365 > -#define CLK_TIMER1 366 > -#define CLK_TIMER2 367 > -#define CLK_TIMER3 368 > -#define CLK_TIMER4 369 > -#define CLK_TIMER5 370 > -#define ACLK_TOP_HIGH 371 > -#define ACLK_TOP_LOW 372 > -#define HCLK_TOP 373 > -#define PCLK_TOP 374 > -#define PCLK_PCIE30PHY 375 > -#define CLK_OPTC_ARB 376 > -#define PCLK_MIPICSIPHY 377 > -#define PCLK_MIPIDSIPHY0 378 > -#define PCLK_MIPIDSIPHY1 379 > -#define PCLK_PIPEPHY0 380 > -#define PCLK_PIPEPHY1 381 > -#define PCLK_PIPEPHY2 382 > -#define PCLK_CPU_BOOST 383 > -#define CLK_CPU_BOOST 384 > -#define PCLK_OTPPHY 385 > -#define SCLK_GMAC0 386 > -#define SCLK_GMAC0_RGMII_SPEED 387 > -#define SCLK_GMAC0_RMII_SPEED 388 > -#define SCLK_GMAC0_RX_TX 389 > -#define SCLK_GMAC1 390 > -#define SCLK_GMAC1_RGMII_SPEED 391 > -#define SCLK_GMAC1_RMII_SPEED 392 > -#define SCLK_GMAC1_RX_TX 393 > -#define SCLK_SDMMC0_DRV 394 > -#define SCLK_SDMMC0_SAMPLE 395 > -#define SCLK_SDMMC1_DRV 396 > -#define SCLK_SDMMC1_SAMPLE 397 > -#define SCLK_SDMMC2_DRV 398 > -#define SCLK_SDMMC2_SAMPLE 399 > -#define SCLK_EMMC_DRV 400 > -#define SCLK_EMMC_SAMPLE 401 > -#define PCLK_EDPPHY_GRF 402 > -#define CLK_HDMI_CEC 403 > -#define CLK_I2S0_8CH_TX 404 > -#define CLK_I2S0_8CH_RX 405 > -#define CLK_I2S1_8CH_TX 406 > -#define CLK_I2S1_8CH_RX 407 > -#define CLK_I2S2_2CH 408 > -#define CLK_I2S3_2CH_TX 409 > -#define CLK_I2S3_2CH_RX 410 > -#define CPLL_500M 411 > -#define CPLL_250M 412 > -#define CPLL_125M 413 > -#define CPLL_62P5M 414 > -#define CPLL_50M 415 > -#define CPLL_25M 416 > -#define CPLL_100M 417 > -#define SCLK_DDRCLK 418 > - > -#define PCLK_CORE_PVTM 450 > - > -#define CLK_NR_CLKS (PCLK_CORE_PVTM + 1) > - > -/* pmu soft-reset indices */ > -/* pmucru_softrst_con0 */ > -#define SRST_P_PDPMU_NIU 0 > -#define SRST_P_PMUCRU 1 > -#define SRST_P_PMUGRF 2 > -#define SRST_P_I2C0 3 > -#define SRST_I2C0 4 > -#define SRST_P_UART0 5 > -#define SRST_S_UART0 6 > -#define SRST_P_PWM0 7 > -#define SRST_PWM0 8 > -#define SRST_P_GPIO0 9 > -#define SRST_GPIO0 10 > -#define SRST_P_PMUPVTM 11 > -#define SRST_PMUPVTM 12 > - > -/* soft-reset indices */ > - > -/* cru_softrst_con0 */ > -#define SRST_NCORERESET0 0 > -#define SRST_NCORERESET1 1 > -#define SRST_NCORERESET2 2 > -#define SRST_NCORERESET3 3 > -#define SRST_NCPUPORESET0 4 > -#define SRST_NCPUPORESET1 5 > -#define SRST_NCPUPORESET2 6 > -#define SRST_NCPUPORESET3 7 > -#define SRST_NSRESET 8 > -#define SRST_NSPORESET 9 > -#define SRST_NATRESET 10 > -#define SRST_NGICRESET 11 > -#define SRST_NPRESET 12 > -#define SRST_NPERIPHRESET 13 > - > -/* cru_softrst_con1 */ > -#define SRST_A_CORE_NIU2DDR 16 > -#define SRST_A_CORE_NIU2BUS 17 > -#define SRST_P_DBG_NIU 18 > -#define SRST_P_DBG 19 > -#define SRST_P_DBG_DAPLITE 20 > -#define SRST_DAP 21 > -#define SRST_A_ADB400_CORE2GIC 22 > -#define SRST_A_ADB400_GIC2CORE 23 > -#define SRST_P_CORE_GRF 24 > -#define SRST_P_CORE_PVTM 25 > -#define SRST_CORE_PVTM 26 > -#define SRST_CORE_PVTPLL 27 > - > -/* cru_softrst_con2 */ > -#define SRST_GPU 32 > -#define SRST_A_GPU_NIU 33 > -#define SRST_P_GPU_NIU 34 > -#define SRST_P_GPU_PVTM 35 > -#define SRST_GPU_PVTM 36 > -#define SRST_GPU_PVTPLL 37 > -#define SRST_A_NPU_NIU 40 > -#define SRST_H_NPU_NIU 41 > -#define SRST_P_NPU_NIU 42 > -#define SRST_A_NPU 43 > -#define SRST_H_NPU 44 > -#define SRST_P_NPU_PVTM 45 > -#define SRST_NPU_PVTM 46 > -#define SRST_NPU_PVTPLL 47 > - > -/* cru_softrst_con3 */ > -#define SRST_A_MSCH 51 > -#define SRST_HWFFC_CTRL 52 > -#define SRST_DDR_ALWAYSON 53 > -#define SRST_A_DDRSPLIT 54 > -#define SRST_DDRDFI_CTL 55 > -#define SRST_A_DMA2DDR 57 > - > -/* cru_softrst_con4 */ > -#define SRST_A_PERIMID_NIU 64 > -#define SRST_H_PERIMID_NIU 65 > -#define SRST_A_GIC_AUDIO_NIU 66 > -#define SRST_H_GIC_AUDIO_NIU 67 > -#define SRST_A_GIC600 68 > -#define SRST_A_GIC600_DEBUG 69 > -#define SRST_A_GICADB_CORE2GIC 70 > -#define SRST_A_GICADB_GIC2CORE 71 > -#define SRST_A_SPINLOCK 72 > -#define SRST_H_SDMMC_BUFFER 73 > -#define SRST_D_SDMMC_BUFFER 74 > -#define SRST_H_I2S0_8CH 75 > -#define SRST_H_I2S1_8CH 76 > -#define SRST_H_I2S2_2CH 77 > -#define SRST_H_I2S3_2CH 78 > - > -/* cru_softrst_con5 */ > -#define SRST_M_I2S0_8CH_TX 80 > -#define SRST_M_I2S0_8CH_RX 81 > -#define SRST_M_I2S1_8CH_TX 82 > -#define SRST_M_I2S1_8CH_RX 83 > -#define SRST_M_I2S2_2CH 84 > -#define SRST_M_I2S3_2CH_TX 85 > -#define SRST_M_I2S3_2CH_RX 86 > -#define SRST_H_PDM 87 > -#define SRST_M_PDM 88 > -#define SRST_H_VAD 89 > -#define SRST_H_SPDIF_8CH 90 > -#define SRST_M_SPDIF_8CH 91 > -#define SRST_H_AUDPWM 92 > -#define SRST_S_AUDPWM 93 > -#define SRST_H_ACDCDIG 94 > -#define SRST_ACDCDIG 95 > - > -/* cru_softrst_con6 */ > -#define SRST_A_SECURE_FLASH_NIU 96 > -#define SRST_H_SECURE_FLASH_NIU 97 > -#define SRST_A_CRYPTO_NS 103 > -#define SRST_H_CRYPTO_NS 104 > -#define SRST_CRYPTO_NS_CORE 105 > -#define SRST_CRYPTO_NS_PKA 106 > -#define SRST_CRYPTO_NS_RNG 107 > -#define SRST_H_TRNG_NS 108 > -#define SRST_TRNG_NS 109 > - > -/* cru_softrst_con7 */ > -#define SRST_H_NANDC 112 > -#define SRST_N_NANDC 113 > -#define SRST_H_SFC 114 > -#define SRST_H_SFC_XIP 115 > -#define SRST_S_SFC 116 > -#define SRST_A_EMMC 117 > -#define SRST_H_EMMC 118 > -#define SRST_B_EMMC 119 > -#define SRST_C_EMMC 120 > -#define SRST_T_EMMC 121 > - > -/* cru_softrst_con8 */ > -#define SRST_A_PIPE_NIU 128 > -#define SRST_P_PIPE_NIU 130 > -#define SRST_P_PIPE_GRF 133 > -#define SRST_A_SATA0 134 > -#define SRST_SATA0_PIPE 135 > -#define SRST_SATA0_PMALIVE 136 > -#define SRST_SATA0_RXOOB 137 > -#define SRST_A_SATA1 138 > -#define SRST_SATA1_PIPE 139 > -#define SRST_SATA1_PMALIVE 140 > -#define SRST_SATA1_RXOOB 141 > - > -/* cru_softrst_con9 */ > -#define SRST_A_SATA2 144 > -#define SRST_SATA2_PIPE 145 > -#define SRST_SATA2_PMALIVE 146 > -#define SRST_SATA2_RXOOB 147 > -#define SRST_USB3OTG0 148 > -#define SRST_USB3OTG1 149 > -#define SRST_XPCS 150 > -#define SRST_XPCS_TX_DIV10 151 > -#define SRST_XPCS_RX_DIV10 152 > -#define SRST_XPCS_XGXS_RX 153 > - > -/* cru_softrst_con10 */ > -#define SRST_P_PCIE20 160 > -#define SRST_PCIE20_POWERUP 161 > -#define SRST_MSTR_ARESET_PCIE20 162 > -#define SRST_SLV_ARESET_PCIE20 163 > -#define SRST_DBI_ARESET_PCIE20 164 > -#define SRST_BRESET_PCIE20 165 > -#define SRST_PERST_PCIE20 166 > -#define SRST_CORE_RST_PCIE20 167 > -#define SRST_NSTICKY_RST_PCIE20 168 > -#define SRST_STICKY_RST_PCIE20 169 > -#define SRST_PWR_RST_PCIE20 170 > - > -/* cru_softrst_con11 */ > -#define SRST_P_PCIE30X1 176 > -#define SRST_PCIE30X1_POWERUP 177 > -#define SRST_M_ARESET_PCIE30X1 178 > -#define SRST_S_ARESET_PCIE30X1 179 > -#define SRST_D_ARESET_PCIE30X1 180 > -#define SRST_BRESET_PCIE30X1 181 > -#define SRST_PERST_PCIE30X1 182 > -#define SRST_CORE_RST_PCIE30X1 183 > -#define SRST_NSTC_RST_PCIE30X1 184 > -#define SRST_STC_RST_PCIE30X1 185 > -#define SRST_PWR_RST_PCIE30X1 186 > - > -/* cru_softrst_con12 */ > -#define SRST_P_PCIE30X2 192 > -#define SRST_PCIE30X2_POWERUP 193 > -#define SRST_M_ARESET_PCIE30X2 194 > -#define SRST_S_ARESET_PCIE30X2 195 > -#define SRST_D_ARESET_PCIE30X2 196 > -#define SRST_BRESET_PCIE30X2 197 > -#define SRST_PERST_PCIE30X2 198 > -#define SRST_CORE_RST_PCIE30X2 199 > -#define SRST_NSTC_RST_PCIE30X2 200 > -#define SRST_STC_RST_PCIE30X2 201 > -#define SRST_PWR_RST_PCIE30X2 202 > - > -/* cru_softrst_con13 */ > -#define SRST_A_PHP_NIU 208 > -#define SRST_H_PHP_NIU 209 > -#define SRST_P_PHP_NIU 210 > -#define SRST_H_SDMMC0 211 > -#define SRST_SDMMC0 212 > -#define SRST_H_SDMMC1 213 > -#define SRST_SDMMC1 214 > -#define SRST_A_GMAC0 215 > -#define SRST_GMAC0_TIMESTAMP 216 > - > -/* cru_softrst_con14 */ > -#define SRST_A_USB_NIU 224 > -#define SRST_H_USB_NIU 225 > -#define SRST_P_USB_NIU 226 > -#define SRST_P_USB_GRF 227 > -#define SRST_H_USB2HOST0 228 > -#define SRST_H_USB2HOST0_ARB 229 > -#define SRST_USB2HOST0_UTMI 230 > -#define SRST_H_USB2HOST1 231 > -#define SRST_H_USB2HOST1_ARB 232 > -#define SRST_USB2HOST1_UTMI 233 > -#define SRST_H_SDMMC2 234 > -#define SRST_SDMMC2 235 > -#define SRST_A_GMAC1 236 > -#define SRST_GMAC1_TIMESTAMP 237 > - > -/* cru_softrst_con15 */ > -#define SRST_A_VI_NIU 240 > -#define SRST_H_VI_NIU 241 > -#define SRST_P_VI_NIU 242 > -#define SRST_A_VICAP 247 > -#define SRST_H_VICAP 248 > -#define SRST_D_VICAP 249 > -#define SRST_I_VICAP 250 > -#define SRST_P_VICAP 251 > -#define SRST_H_ISP 252 > -#define SRST_ISP 253 > -#define SRST_P_CSI2HOST1 255 > - > -/* cru_softrst_con16 */ > -#define SRST_A_VO_NIU 256 > -#define SRST_H_VO_NIU 257 > -#define SRST_P_VO_NIU 258 > -#define SRST_A_VOP_NIU 259 > -#define SRST_A_VOP 260 > -#define SRST_H_VOP 261 > -#define SRST_VOP0 262 > -#define SRST_VOP1 263 > -#define SRST_VOP2 264 > -#define SRST_VOP_PWM 265 > -#define SRST_A_HDCP 266 > -#define SRST_H_HDCP 267 > -#define SRST_P_HDCP 268 > -#define SRST_P_HDMI_HOST 270 > -#define SRST_HDMI_HOST 271 > - > -/* cru_softrst_con17 */ > -#define SRST_P_DSITX_0 272 > -#define SRST_P_DSITX_1 273 > -#define SRST_P_EDP_CTRL 274 > -#define SRST_EDP_24M 275 > -#define SRST_A_VPU_NIU 280 > -#define SRST_H_VPU_NIU 281 > -#define SRST_A_VPU 282 > -#define SRST_H_VPU 283 > -#define SRST_H_EINK 286 > -#define SRST_P_EINK 287 > - > -/* cru_softrst_con18 */ > -#define SRST_A_RGA_NIU 288 > -#define SRST_H_RGA_NIU 289 > -#define SRST_P_RGA_NIU 290 > -#define SRST_A_RGA 292 > -#define SRST_H_RGA 293 > -#define SRST_RGA_CORE 294 > -#define SRST_A_IEP 295 > -#define SRST_H_IEP 296 > -#define SRST_IEP_CORE 297 > -#define SRST_H_EBC 298 > -#define SRST_D_EBC 299 > -#define SRST_A_JDEC 300 > -#define SRST_H_JDEC 301 > -#define SRST_A_JENC 302 > -#define SRST_H_JENC 303 > - > -/* cru_softrst_con19 */ > -#define SRST_A_VENC_NIU 304 > -#define SRST_H_VENC_NIU 305 > -#define SRST_A_RKVENC 307 > -#define SRST_H_RKVENC 308 > -#define SRST_RKVENC_CORE 309 > - > -/* cru_softrst_con20 */ > -#define SRST_A_RKVDEC_NIU 320 > -#define SRST_H_RKVDEC_NIU 321 > -#define SRST_A_RKVDEC 322 > -#define SRST_H_RKVDEC 323 > -#define SRST_RKVDEC_CA 324 > -#define SRST_RKVDEC_CORE 325 > -#define SRST_RKVDEC_HEVC_CA 326 > - > -/* cru_softrst_con21 */ > -#define SRST_A_BUS_NIU 336 > -#define SRST_P_BUS_NIU 338 > -#define SRST_P_CAN0 340 > -#define SRST_CAN0 341 > -#define SRST_P_CAN1 342 > -#define SRST_CAN1 343 > -#define SRST_P_CAN2 344 > -#define SRST_CAN2 345 > -#define SRST_P_GPIO1 346 > -#define SRST_GPIO1 347 > -#define SRST_P_GPIO2 348 > -#define SRST_GPIO2 349 > -#define SRST_P_GPIO3 350 > -#define SRST_GPIO3 351 > - > -/* cru_softrst_con22 */ > -#define SRST_P_GPIO4 352 > -#define SRST_GPIO4 353 > -#define SRST_P_I2C1 354 > -#define SRST_I2C1 355 > -#define SRST_P_I2C2 356 > -#define SRST_I2C2 357 > -#define SRST_P_I2C3 358 > -#define SRST_I2C3 359 > -#define SRST_P_I2C4 360 > -#define SRST_I2C4 361 > -#define SRST_P_I2C5 362 > -#define SRST_I2C5 363 > -#define SRST_P_OTPC_NS 364 > -#define SRST_OTPC_NS_SBPI 365 > -#define SRST_OTPC_NS_USR 366 > - > -/* cru_softrst_con23 */ > -#define SRST_P_PWM1 368 > -#define SRST_PWM1 369 > -#define SRST_P_PWM2 370 > -#define SRST_PWM2 371 > -#define SRST_P_PWM3 372 > -#define SRST_PWM3 373 > -#define SRST_P_SPI0 374 > -#define SRST_SPI0 375 > -#define SRST_P_SPI1 376 > -#define SRST_SPI1 377 > -#define SRST_P_SPI2 378 > -#define SRST_SPI2 379 > -#define SRST_P_SPI3 380 > -#define SRST_SPI3 381 > - > -/* cru_softrst_con24 */ > -#define SRST_P_SARADC 384 > -#define SRST_P_TSADC 385 > -#define SRST_TSADC 386 > -#define SRST_P_TIMER 387 > -#define SRST_TIMER0 388 > -#define SRST_TIMER1 389 > -#define SRST_TIMER2 390 > -#define SRST_TIMER3 391 > -#define SRST_TIMER4 392 > -#define SRST_TIMER5 393 > -#define SRST_P_UART1 394 > -#define SRST_S_UART1 395 > - > -/* cru_softrst_con25 */ > -#define SRST_P_UART2 400 > -#define SRST_S_UART2 401 > -#define SRST_P_UART3 402 > -#define SRST_S_UART3 403 > -#define SRST_P_UART4 404 > -#define SRST_S_UART4 405 > -#define SRST_P_UART5 406 > -#define SRST_S_UART5 407 > -#define SRST_P_UART6 408 > -#define SRST_S_UART6 409 > -#define SRST_P_UART7 410 > -#define SRST_S_UART7 411 > -#define SRST_P_UART8 412 > -#define SRST_S_UART8 413 > -#define SRST_P_UART9 414 > -#define SRST_S_UART9 415 > - > -/* cru_softrst_con26 */ > -#define SRST_P_GRF 416 > -#define SRST_P_GRF_VCCIO12 417 > -#define SRST_P_GRF_VCCIO34 418 > -#define SRST_P_GRF_VCCIO567 419 > -#define SRST_P_SCR 420 > -#define SRST_P_WDT_NS 421 > -#define SRST_T_WDT_NS 422 > -#define SRST_P_DFT2APB 423 > -#define SRST_A_MCU 426 > -#define SRST_P_INTMUX 427 > -#define SRST_P_MAILBOX 428 > - > -/* cru_softrst_con27 */ > -#define SRST_A_TOP_HIGH_NIU 432 > -#define SRST_A_TOP_LOW_NIU 433 > -#define SRST_H_TOP_NIU 434 > -#define SRST_P_TOP_NIU 435 > -#define SRST_P_TOP_CRU 438 > -#define SRST_P_DDRPHY 439 > -#define SRST_DDRPHY 440 > -#define SRST_P_MIPICSIPHY 442 > -#define SRST_P_MIPIDSIPHY0 443 > -#define SRST_P_MIPIDSIPHY1 444 > -#define SRST_P_PCIE30PHY 445 > -#define SRST_PCIE30PHY 446 > -#define SRST_P_PCIE30PHY_GRF 447 > - > -/* cru_softrst_con28 */ > -#define SRST_P_APB2ASB_LEFT 448 > -#define SRST_P_APB2ASB_BOTTOM 449 > -#define SRST_P_ASB2APB_LEFT 450 > -#define SRST_P_ASB2APB_BOTTOM 451 > -#define SRST_P_PIPEPHY0 452 > -#define SRST_PIPEPHY0 453 > -#define SRST_P_PIPEPHY1 454 > -#define SRST_PIPEPHY1 455 > -#define SRST_P_PIPEPHY2 456 > -#define SRST_PIPEPHY2 457 > -#define SRST_P_USB2PHY0_GRF 458 > -#define SRST_P_USB2PHY1_GRF 459 > -#define SRST_P_CPU_BOOST 460 > -#define SRST_CPU_BOOST 461 > -#define SRST_P_OTPPHY 462 > -#define SRST_OTPPHY 463 > - > -/* cru_softrst_con29 */ > -#define SRST_USB2PHY0_POR 464 > -#define SRST_USB2PHY0_USB3OTG0 465 > -#define SRST_USB2PHY0_USB3OTG1 466 > -#define SRST_USB2PHY1_POR 467 > -#define SRST_USB2PHY1_USB2HOST0 468 > -#define SRST_USB2PHY1_USB2HOST1 469 > -#define SRST_P_EDPPHY_GRF 470 > -#define SRST_TSADCPHY 471 > -#define SRST_GMAC0_DELAYLINE 472 > -#define SRST_GMAC1_DELAYLINE 473 > -#define SRST_OTPC_ARB 474 > -#define SRST_P_PIPEPHY0_GRF 475 > -#define SRST_P_PIPEPHY1_GRF 476 > -#define SRST_P_PIPEPHY2_GRF 477 > - > -#endif > diff --git a/include/dt-bindings/power/rk3568-power.h b/include/dt-bindings/power/rk3568-power.h > deleted file mode 100644 > index 6cc1af1a9d26..000000000000 > --- a/include/dt-bindings/power/rk3568-power.h > +++ /dev/null > @@ -1,32 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0 */ > -#ifndef __DT_BINDINGS_POWER_RK3568_POWER_H__ > -#define __DT_BINDINGS_POWER_RK3568_POWER_H__ > - > -/* VD_CORE */ > -#define RK3568_PD_CPU_0 0 > -#define RK3568_PD_CPU_1 1 > -#define RK3568_PD_CPU_2 2 > -#define RK3568_PD_CPU_3 3 > -#define RK3568_PD_CORE_ALIVE 4 > - > -/* VD_PMU */ > -#define RK3568_PD_PMU 5 > - > -/* VD_NPU */ > -#define RK3568_PD_NPU 6 > - > -/* VD_GPU */ > -#define RK3568_PD_GPU 7 > - > -/* VD_LOGIC */ > -#define RK3568_PD_VI 8 > -#define RK3568_PD_VO 9 > -#define RK3568_PD_RGA 10 > -#define RK3568_PD_VPU 11 > -#define RK3568_PD_CENTER 12 > -#define RK3568_PD_RKVDEC 13 > -#define RK3568_PD_RKVENC 14 > -#define RK3568_PD_PIPE 15 > -#define RK3568_PD_LOGIC_ALIVE 16 > - > -#endif
diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi b/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi deleted file mode 100644 index 8cbf3d9a4f22..000000000000 --- a/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi +++ /dev/null @@ -1,788 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3566.dtsi" - -/ { - chosen: chosen { - stdout-path = "serial2:1500000n8"; - }; - - adc-joystick { - compatible = "adc-joystick"; - io-channels = <&adc_mux 0>, - <&adc_mux 1>, - <&adc_mux 2>, - <&adc_mux 3>; - pinctrl-0 = <&joy_mux_en>; - pinctrl-names = "default"; - poll-interval = <60>; - #address-cells = <1>; - #size-cells = <0>; - - axis@0 { - reg = <0>; - abs-flat = <32>; - abs-fuzz = <32>; - abs-range = <1023 15>; - linux,code = <ABS_X>; - }; - - axis@1 { - reg = <1>; - abs-flat = <32>; - abs-fuzz = <32>; - abs-range = <15 1023>; - linux,code = <ABS_RX>; - }; - - axis@2 { - reg = <2>; - abs-flat = <32>; - abs-fuzz = <32>; - abs-range = <15 1023>; - linux,code = <ABS_Y>; - }; - - axis@3 { - reg = <3>; - abs-flat = <32>; - abs-fuzz = <32>; - abs-range = <1023 15>; - linux,code = <ABS_RY>; - }; - }; - - adc_keys: adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - poll-interval = <60>; - - /* - * Button is mapped to F key in BSP kernel, but - * according to input guidelines it should be mode. - */ - button-mode { - label = "MODE"; - linux,code = <BTN_MODE>; - press-threshold-microvolt = <1750>; - }; - }; - - adc_mux: adc-mux { - compatible = "io-channel-mux"; - channels = "left_x", "right_x", "left_y", "right_y"; - #io-channel-cells = <1>; - io-channels = <&saradc 3>; - io-channel-names = "parent"; - mux-controls = <&gpio_mux>; - settle-time-us = <100>; - }; - - gpio_keys_control: gpio-keys-control { - compatible = "gpio-keys"; - pinctrl-0 = <&btn_pins_ctrl>; - pinctrl-names = "default"; - - button-b { - gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>; - label = "SOUTH"; - linux,code = <BTN_SOUTH>; - }; - - button-down { - gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; - label = "DPAD-DOWN"; - linux,code = <BTN_DPAD_DOWN>; - }; - - button-l1 { - gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; - label = "TL"; - linux,code = <BTN_TL>; - }; - - button-l2 { - gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; - label = "TL2"; - linux,code = <BTN_TL2>; - }; - - button-select { - gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; - label = "SELECT"; - linux,code = <BTN_SELECT>; - }; - - button-start { - gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>; - label = "START"; - linux,code = <BTN_START>; - }; - - button-thumbl { - gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; - label = "THUMBL"; - linux,code = <BTN_THUMBL>; - }; - - button-thumbr { - gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; - label = "THUMBR"; - linux,code = <BTN_THUMBR>; - }; - - button-up { - gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; - label = "DPAD-UP"; - linux,code = <BTN_DPAD_UP>; - }; - - button-x { - gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; - label = "NORTH"; - linux,code = <BTN_NORTH>; - }; - }; - - gpio_keys_vol: gpio-keys-vol { - compatible = "gpio-keys"; - autorepeat; - pinctrl-0 = <&btn_pins_vol>; - pinctrl-names = "default"; - - button-vol-down { - gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; - label = "VOLUMEDOWN"; - linux,code = <KEY_VOLUMEDOWN>; - }; - - button-vol-up { - gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; - label = "VOLUMEUP"; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - gpio_mux: mux-controller { - compatible = "gpio-mux"; - mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>, - <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; - #mux-control-cells = <0>; - }; - - hdmi-con { - compatible = "hdmi-connector"; - ddc-i2c-bus = <&i2c5>; - type = "c"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds: pwm-leds { - compatible = "pwm-leds"; - - green_led: led-0 { - color = <LED_COLOR_ID_GREEN>; - default-state = "on"; - function = LED_FUNCTION_POWER; - max-brightness = <255>; - pwms = <&pwm6 0 25000 0>; - }; - - amber_led: led-1 { - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_CHARGING; - max-brightness = <255>; - pwms = <&pwm7 0 25000 0>; - }; - - red_led: led-2 { - color = <LED_COLOR_ID_RED>; - default-state = "off"; - function = LED_FUNCTION_STATUS; - max-brightness = <255>; - pwms = <&pwm0 0 25000 0>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk817 1>; - clock-names = "ext_clock"; - pinctrl-0 = <&wifi_enable_h>; - pinctrl-names = "default"; - post-power-on-delay-ms = <200>; - reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; - }; - - vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 { - compatible = "regulator-fixed"; - gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-0 = <&vcc_lcd_h>; - pinctrl-names = "default"; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3_lcd0_n"; - vin-supply = <&vcc_3v3>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_sys: regulator-vcc-sys { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <3800000>; - regulator-name = "vcc_sys"; - }; - - vcc_wifi: regulator-vcc-wifi { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&vcc_wifi_h>; - pinctrl-names = "default"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_wifi"; - }; - - vibrator: pwm-vibrator { - compatible = "pwm-vibrator"; - pwm-names = "enable"; - pwms = <&pwm5 0 1000000000 0>; - }; -}; - -&combphy1 { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - pinctrl-0 = <&hdmitxm0_cec>; - pinctrl-names = "default"; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - clock-names = "mclk"; - clocks = <&cru I2S1_MCLKOUT_TX>; - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; - #clock-cells = <1>; - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc5-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_sys>; - vcc9-supply = <&dcdc_boost>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_logic"; - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_gpu"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-name = "vcc_ddr"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v3: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <0x2>; - regulator-name = "vcc_3v3"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca1v8_pmu: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca1v8_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda_0v9"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda0v9_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_acodec"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_dvp: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc1v8_dvp"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc2v8_dvp: LDO_REG9 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-name = "vcc2v8_dvp"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - dcdc_boost: BOOST { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <4700000>; - regulator-max-microvolt = <5400000>; - regulator-name = "boost"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - otg_switch: OTG_SWITCH { - regulator-name = "otg_switch"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu: regulator@40 { - compatible = "fcs,fan53555"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1390000>; - regulator-name = "vdd_cpu"; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc_sys>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c1 { - /* Unknown/unused device at 0x3c */ - status = "disabled"; -}; - -&i2c5 { - pinctrl-0 = <&i2c5m1_xfer>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2s0_8ch { - status = "okay"; -}; - -&i2s1_8ch { - pinctrl-0 = <&i2s1m0_sclktx - &i2s1m0_lrcktx - &i2s1m0_sdi0 - &i2s1m0_sdo0>; - pinctrl-names = "default"; - rockchip,trcm-sync-tx-only; - status = "okay"; -}; - -&pinctrl { - gpio-btns { - btn_pins_ctrl: btn-pins-ctrl { - rockchip,pins = - <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - btn_pins_vol: btn-pins-vol { - rockchip,pins = - <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, - <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - joy-mux { - joy_mux_en: joy-mux-en { - rockchip,pins = - <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = - <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - vcc3v3-lcd { - vcc_lcd_h: vcc-lcd-h { - rockchip,pins = - <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - vcc-wifi { - vcc_wifi_h: vcc-wifi-h { - rockchip,pins = - <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - status = "okay"; - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc1v8_dvp>; - vccio7-supply = <&vcc_3v3>; -}; - -&pwm0 { - pinctrl-0 = <&pwm0m1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pwm5 { - status = "okay"; -}; - -&pwm6 { - status = "okay"; -}; - -&pwm7 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc0 { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - pinctrl-names = "default"; - sd-uhs-sdr104; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&sdmmc1 { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>; - disable-wp; - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>; - pinctrl-names = "default"; - sd-uhs-sdr104; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc1v8_dvp>; - status = "okay"; -}; - -&sdmmc2 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; - pinctrl-names = "default"; - vmmc-supply = <&vcc_wifi>; - vqmmc-supply = <&vcca1v8_pmu>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&uart1 { - pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>; - pinctrl-names = "default"; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; - device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; - enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; - host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart2 { - status = "okay"; -}; - -/* - * Lack the schematics to verify, but port works as a peripheral - * (and not a host or OTG port). - */ -&usb_host0_xhci { - dr_mode = "peripheral"; - phys = <&usb2phy0_otg>; - phy-names = "usb2-phy"; - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb_host1_xhci { - phy-names = "usb2-phy", "usb3-phy"; - phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>; - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_otg { - status = "okay"; -}; - -&usb2phy1 { - status = "okay"; -}; - -&usb2phy1_host { - status = "okay"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi_in_vp0>; - }; -}; diff --git a/arch/arm/dts/rk3566-quartz64-a.dts b/arch/arm/dts/rk3566-quartz64-a.dts deleted file mode 100644 index 59843a7a199c..000000000000 --- a/arch/arm/dts/rk3566-quartz64-a.dts +++ /dev/null @@ -1,838 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3566.dtsi" - -/ { - model = "Pine64 RK3566 Quartz64-A Board"; - compatible = "pine64,quartz64-a", "rockchip,rk3566"; - - aliases { - ethernet0 = &gmac1; - mmc0 = &sdmmc0; - mmc1 = &sdhci; - }; - - chosen: chosen { - stdout-path = "serial2:1500000n8"; - }; - - gmac1_clkin: external-gmac1-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac1_clkin"; - #clock-cells = <0>; - }; - - fan: gpio_fan { - compatible = "gpio-fan"; - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = - < 0 0>, - <4500 1>; - pinctrl-names = "default"; - pinctrl-0 = <&fan_en_h>; - #cooling-cells = <2>; - }; - - hdmi-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-work { - label = "work-led"; - default-state = "off"; - gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&work_led_enable_h>; - retain-state-suspended; - }; - - led-diy { - label = "diy-led"; - default-state = "on"; - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - pinctrl-names = "default"; - pinctrl-0 = <&diy_led_enable_h>; - retain-state-suspended; - }; - }; - - rk817-sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "Analog RK817"; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,cpu { - sound-dai = <&i2s1_8ch>; - }; - - simple-audio-card,codec { - sound-dai = <&rk817>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk817 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - post-power-on-delay-ms = <100>; - power-off-delay-us = <5000000>; - reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; - }; - - spdif_dit: spdif-dit { - compatible = "linux,spdif-dit"; - #sound-dai-cells = <0>; - }; - - spdif_sound: spdif-sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "SPDIF"; - - simple-audio-card,cpu { - sound-dai = <&spdif>; - }; - - simple-audio-card,codec { - sound-dai = <&spdif_dit>; - }; - }; - - vcc12v_dcin: vcc12v_dcin { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* vbus feeds the rk817 usb input. - * With no battery attached, also feeds vcc_bat+ - * via ON/OFF_BAT jumper - */ - vbus: vbus { - compatible = "regulator-fixed"; - regulator-name = "vbus"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_enable_h>; - regulator-name = "vcc3v3_pcie_p"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3v3>; - }; - - vcc5v0_usb: vcc5v0_usb { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - /* all four ports are controlled by one gpio - * the host ports are sourced from vcc5v0_usb - * the otg port is sourced from vcc5v0_midu - */ - vcc5v0_usb20_host: vcc5v0_usb20_host { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb20_host_en>; - regulator-name = "vcc5v0_usb20_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_usb20_otg: vcc5v0_usb20_otg { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; - regulator-name = "vcc5v0_usb20_otg"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dcdc_boost>; - }; - - vcc3v3_sd: vcc3v3_sd { - compatible = "regulator-fixed"; - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_sd_h>; - regulator-boot-on; - regulator-name = "vcc3v3_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3v3>; - }; - - /* sourced from vbus and vcc_bat+ via rk817 sw5 */ - vcc_sys: vcc_sys { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <4400000>; - regulator-max-microvolt = <4400000>; - vin-supply = <&vbus>; - }; - - /* sourced from vcc_sys, sdio module operates internally at 3.3v */ - vcc_wl: vcc_wl { - compatible = "regulator-fixed"; - regulator-name = "vcc_wl"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_sys>; - }; -}; - -&combphy1 { - status = "okay"; -}; - -&combphy2 { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_thermal { - trips { - cpu_hot: cpu_hot { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - }; - - cooling-maps { - map1 { - trip = <&cpu_hot>; - cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&gmac1 { - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; - clock_in_out = "input"; - phy-supply = <&vcc_3v3>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac1m0_miim - &gmac1m0_tx_bus2 - &gmac1m0_rx_bus2 - &gmac1m0_rgmii_clk - &gmac1m0_clkinout - &gmac1m0_rgmii_bus>; - snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 20ms, 100ms for rtl8211f */ - snps,reset-delays-us = <0 20000 100000>; - tx_delay = <0x30>; - rx_delay = <0x10>; - phy-handle = <&rgmii_phy1>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vdda_0v9>; - avdd-1v8-supply = <&vcc_1v8>; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <2300>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; - clock-names = "mclk"; - clocks = <&cru I2S1_MCLKOUT_TX>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - #clock-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; - rockchip,system-power-controller; - #sound-dai-cells = <0>; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc5-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_sys>; - vcc9-supply = <&dcdc_boost>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_logic"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_gpu"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-name = "vcc_ddr"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v3: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <0x2>; - regulator-name = "vcc_3v3"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca1v8_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda_0v9"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda0v9_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_acodec"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_dvp: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8_dvp"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc2v8_dvp: LDO_REG9 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-name = "vcc2v8_dvp"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - dcdc_boost: BOOST { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-name = "boost"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - otg_switch: OTG_SWITCH { - regulator-name = "otg_switch"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -/* i2c3 is exposed on con40 - * pin 3 - i2c3_sda_m0, pullup to vcc_3v3 - * pin 5 - i2c3_scl_m0, pullup to vcc_3v3 - */ -&i2c3 { - status = "okay"; -}; - -&i2s0_8ch { - status = "okay"; -}; - -&i2s1_8ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s1m0_sclktx - &i2s1m0_lrcktx - &i2s1m0_sdi0 - &i2s1m0_sdo0>; - rockchip,trcm-sync-tx-only; - status = "okay"; -}; - -&mdio1 { - rgmii_phy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; -}; - -&pcie2x1 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_h>; - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie_p>; - status = "okay"; -}; - -&pinctrl { - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - fan { - fan_en_h: fan-en-h { - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - work_led_enable_h: work-led-enable-h { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - diy_led_enable_h: diy-led-enable-h { - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_enable_h: pcie-enable-h { - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_reset_h: pcie-reset-h { - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { - rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - vcc_sd { - vcc_sd_h: vcc-sd-h { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio2-supply = <&vcc_1v8>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc1v8_dvp>; - vccio7-supply = <&vcc_3v3>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc0 { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v3_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&sdmmc1 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; - sd-uhs-sdr104; - vmmc-supply = <&vcc_wl>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sfc { - pinctrl-0 = <&fspi_pins>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <1>; - }; -}; - -/* spdif is exposed on con40 pin 18 */ -&spdif { - status = "okay"; -}; - -/* spi1 is exposed on con40 - * pin 11 - spi1_mosi_m1 - * pin 13 - spi1_miso_m1 - * pin 15 - spi1_clk_m1 - * pin 17 - spi1_cs0_m1 - */ -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -/* uart0 is exposed on con40 - * pin 12 - uart0_tx - * pin 14 - uart0_rx - */ -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; - status = "okay"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rk817 1>; - clock-names = "lpo"; - host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; - vbat-supply = <&vcc_sys>; - vddio-supply = <&vcca1v8_pmu>; - max-speed = <3000000>; - }; -}; - -/* uart2 is exposed on con40 - * pin 8 - uart2_tx_m0_debug - * pin 10 - uart2_rx_m0_debug - */ -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb_host0_xhci { - dr_mode = "host"; - status = "okay"; -}; - -/* usb3 controller is muxed with sata1 */ -&usb_host1_xhci { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_host { - phy-supply = <&vcc5v0_usb20_host>; - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vcc5v0_usb20_otg>; - status = "okay"; -}; - -&usb2phy1 { - status = "okay"; -}; - -&usb2phy1_host { - phy-supply = <&vcc5v0_usb20_host>; - status = "okay"; -}; - -&usb2phy1_otg { - phy-supply = <&vcc5v0_usb20_host>; - status = "okay"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi_in_vp0>; - }; -}; diff --git a/arch/arm/dts/rk3566-quartz64-b.dts b/arch/arm/dts/rk3566-quartz64-b.dts deleted file mode 100644 index 2d92713be2a0..000000000000 --- a/arch/arm/dts/rk3566-quartz64-b.dts +++ /dev/null @@ -1,737 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3566.dtsi" - -/ { - model = "Pine64 RK3566 Quartz64-B Board"; - compatible = "pine64,quartz64-b", "rockchip,rk3566"; - - aliases { - ethernet0 = &gmac1; - mmc0 = &sdmmc0; - mmc1 = &sdhci; - mmc2 = &sdmmc1; - }; - - chosen: chosen { - stdout-path = "serial2:1500000n8"; - }; - - gmac1_clkin: external-gmac1-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac1_clkin"; - #clock-cells = <0>; - }; - - hdmi-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-user { - label = "user-led"; - default-state = "on"; - gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - pinctrl-names = "default"; - pinctrl-0 = <&user_led_enable_h>; - retain-state-suspended; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "Analog RK809"; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,cpu { - sound-dai = <&i2s1_8ch>; - }; - - simple-audio-card,codec { - sound-dai = <&rk809>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - status = "okay"; - compatible = "mmc-pwrseq-simple"; - clocks = <&rk809 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; - post-power-on-delay-ms = <100>; - power-off-delay-us = <5000000>; - }; - - vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_enable_h>; - regulator-name = "vcc3v3_pcie_p"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3v3>; - }; - - vcc5v0_in: vcc5v0-in-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_in"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_in>; - }; - - vcc3v3_sys: vcc3v3-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb30_host"; - enable-active-high; - gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb30_host_en_h>; - regulator-always-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb_otg"; - enable-active-high; - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb_otg_en_h>; - regulator-always-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&combphy1 { - status = "okay"; -}; - -&combphy2 { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&gmac1 { - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; - clock_in_out = "input"; - phy-mode = "rgmii"; - phy-supply = <&vcc_3v3>; - pinctrl-names = "default"; - pinctrl-0 = <&gmac1m1_miim - &gmac1m1_tx_bus2 - &gmac1m1_rx_bus2 - &gmac1m1_rgmii_clk - &gmac1m1_clkinout - &gmac1m1_rgmii_bus>; - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 20ms, 100ms for rtl8211f, also works well here */ - snps,reset-delays-us = <0 20000 100000>; - tx_delay = <0x4f>; - rx_delay = <0x24>; - phy-handle = <&rgmii_phy1>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vdda0v9_image>; - avdd-1v8-supply = <&vcca1v8_image>; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <2300>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; - clock-names = "mclk"; - clocks = <&cru I2S1_MCLKOUT_TX>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; - rockchip,system-power-controller; - #sound-dai-cells = <0>; - wakeup-source; - #clock-cells = <1>; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - - regulators { - vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-name = "vdd_npu"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-initial-mode = <0x2>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-name = "vdda0v9_image"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-name = "vdda_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-name = "vdda0v9_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-name = "vccio_acodec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-name = "vcc3v3_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-name = "vcca1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-name = "vcca1v8_image"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-boot-on; - regulator-name = "vcc_3v3"; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-name = "vcc3v3_sd"; - }; - }; - }; -}; - -/* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */ -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2m1_xfer>; - status = "okay"; -}; - -/* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */ -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3m1_xfer>; - status = "okay"; -}; - -/* - * i2c4_m0 is exposed on PI40, pulled up to vcc_3v3 - * pin 27 - i2c4_sda_m0 - * pin 28 - i2c4_scl_m0 - */ -&i2c4 { - status = "okay"; -}; - -/* - * i2c5_m0 is exposed on PI40 - * pin 29 - i2c5_scl_m0 - * pin 31 - i2c5_sda_m0 - */ -&i2c5 { - status = "disabled"; -}; - -&i2s0_8ch { - status = "okay"; -}; - -&i2s1_8ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s1m0_sclktx - &i2s1m0_lrcktx - &i2s1m0_sdi0 - &i2s1m0_sdo0>; - rockchip,trcm-sync-tx-only; - status = "okay"; -}; - -&mdio1 { - rgmii_phy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x1>; - }; -}; - -&pcie2x1 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_h>; - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie_p>; - status = "okay"; -}; - -&pinctrl { - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - user_led_enable_h: user-led-enable-h { - rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_enable_h: pcie-enable-h { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_reset_h: pcie-reset-h { - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic_int { - rockchip,pins = - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h { - rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h { - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - status = "okay"; - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcca1v8_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio2-supply = <&vcc_1v8>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcca1v8_pmu>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_3v3>; - vccio7-supply = <&vcc_3v3>; -}; - -&saradc { - vref-supply = <&vcca_1v8>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc0 { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - sd-uhs-sdr50; - vmmc-supply = <&vcc3v3_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&sdmmc1 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; - vmmc-supply = <&vcc3v3_sys>; - vqmmc-supply = <&vcca1v8_pmu>; - status = "okay"; -}; - -&sfc { - pinctrl-0 = <&fspi_pins>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <1>; - }; -}; - -&tsadc { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; - status = "okay"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm4345c5"; - clocks = <&rk809 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; - vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcca1v8_pmu>; - }; -}; - -/* - * uart2_m0 is exposed on PI40 - * pin 8 - uart2_tx_m0 - * pin 10 - uart2_rx_m0 - */ -&uart2 { - status = "okay"; -}; - -&usb2phy0_host { - phy-supply = <&vcc5v0_usb30_host>; - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vcc5v0_usb_otg>; - status = "okay"; -}; - -&usb2phy1_otg { - phy-supply = <&vcc5v0_usb30_host>; - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy1 { - status = "okay"; -}; - -&usb_host0_xhci { - status = "okay"; -}; - -&usb_host1_xhci { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi_in_vp0>; - }; -}; diff --git a/arch/arm/dts/rk3566-radxa-cm3-io.dts b/arch/arm/dts/rk3566-radxa-cm3-io.dts deleted file mode 100644 index 3ae24e39450a..000000000000 --- a/arch/arm/dts/rk3566-radxa-cm3-io.dts +++ /dev/null @@ -1,281 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2022 Radxa Limited - * Copyright (c) 2022 Amarula Solutions(India) - */ - -/dts-v1/; -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3566.dtsi" -#include "rk3566-radxa-cm3.dtsi" - -/ { - model = "Radxa Compute Module 3(CM3) IO Board"; - compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566"; - - aliases { - ethernet0 = &gmac1; - mmc1 = &sdmmc0; - }; - - chosen: chosen { - stdout-path = "serial2:1500000n8"; - }; - - gmac1_clkin: external-gmac1-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac1_clkin"; - #clock-cells = <0>; - }; - - hdmi-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-1 { - gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_ACTIVITY; - linux,default-trigger = "heartbeat"; - pinctrl-names = "default"; - pinctrl-0 = <&pi_nled_activity>; - }; - }; - - vcc5v0_usb30: vcc5v0-usb30-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb30"; - enable-active-high; - gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb30_en_h>; - regulator-always-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_sys>; - }; - - vcca1v8_image: vcca1v8-image-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcca1v8_image"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8_p>; - }; - - vdda0v9_image: vdda0v9-image-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcca0v9_image"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - vin-supply = <&vdda_0v9>; - }; -}; - -&combphy1 { - status = "okay"; -}; - -&gmac1 { - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; - assigned-clock-rates = <0>, <125000000>; - clock_in_out = "input"; - phy-handle = <&rgmii_phy1>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac1m0_miim - &gmac1m0_tx_bus2 - &gmac1m0_rx_bus2 - &gmac1m0_rgmii_clk - &gmac1m0_rgmii_bus - &gmac1m0_clkinout>; - snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 20ms, 100ms for rtl8211f */ - snps,reset-delays-us = <0 20000 100000>; - tx_delay = <0x46>; - rx_delay = <0x2e>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vdda0v9_image>; - avdd-1v8-supply = <&vcca1v8_image>; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&mdio1 { - rgmii_phy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - }; -}; - -&pinctrl { - gmac1 { - gmac1m0_miim: gmac1m0-miim { - rockchip,pins = - /* gmac1_mdcm0 */ - <3 RK_PC4 3 &pcfg_pull_none_drv_level_15>, - /* gmac1_mdiom0 */ - <3 RK_PC5 3 &pcfg_pull_none_drv_level_15>; - }; - - gmac1m0_rx_bus2: gmac1m0-rx-bus2 { - rockchip,pins = - /* gmac1_rxd0m0 */ - <3 RK_PB1 3 &pcfg_pull_none_drv_level_15>, - /* gmac1_rxd1m0 */ - <3 RK_PB2 3 &pcfg_pull_none_drv_level_15>, - /* gmac1_rxdvcrsm0 */ - <3 RK_PB3 3 &pcfg_pull_none_drv_level_15>; - }; - - gmac1m0_tx_bus2: gmac1m0-tx-bus2 { - rockchip,pins = - /* gmac1_txd0m0 */ - <3 RK_PB5 3 &pcfg_pull_none_drv_level_15>, - /* gmac1_txd1m0 */ - <3 RK_PB6 3 &pcfg_pull_none_drv_level_15>, - /* gmac1_txenm0 */ - <3 RK_PB7 3 &pcfg_pull_none_drv_level_15>; - }; - - gmac1m0_rgmii_clk: gmac1m0-rgmii-clk { - rockchip,pins = - /* gmac1_rxclkm0 */ - <3 RK_PA7 3 &pcfg_pull_none_drv_level_15>, - /* gmac1_txclkm0 */ - <3 RK_PA6 3 &pcfg_pull_none_drv_level_15>; - }; - - gmac1m0_rgmii_bus: gmac1m0-rgmii-bus { - rockchip,pins = - /* gmac1_rxd2m0 */ - <3 RK_PA4 3 &pcfg_pull_none_drv_level_15>, - /* gmac1_rxd3m0 */ - <3 RK_PA5 3 &pcfg_pull_none_drv_level_15>, - /* gmac1_txd2m0 */ - <3 RK_PA2 3 &pcfg_pull_none_drv_level_15>, - /* gmac1_txd3m0 */ - <3 RK_PA3 3 &pcfg_pull_none_drv_level_15>; - }; - - gmac1m0_clkinout: gmac1m0-clkinout { - rockchip,pins = - /* gmac1_mclkinoutm0 */ - <3 RK_PC0 3 &pcfg_pull_none_drv_level_15>; - }; - }; - - leds { - pi_nled_activity: pi-nled-activity { - rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdcard { - sdmmc_pwren: sdmmc-pwren { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - vcc5v0_usb30_en_h: vcc5v0-host-en-h { - rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&sdmmc0 { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - disable-wp; - vqmmc-supply = <&vccio_sd>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb2phy0_host { - phy-supply = <&vcc5v0_usb30>; - status = "okay"; -}; - -&usb2phy1_host { - status = "okay"; -}; - -&usb2phy1_otg { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host1_xhci { - status = "okay"; -}; - -&usb2phy0_otg { - status = "okay"; -}; - -&usb_host0_xhci { - status = "okay"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi_in_vp0>; - }; -}; diff --git a/arch/arm/dts/rk3566-radxa-cm3.dtsi b/arch/arm/dts/rk3566-radxa-cm3.dtsi deleted file mode 100644 index 45de2630bb50..000000000000 --- a/arch/arm/dts/rk3566-radxa-cm3.dtsi +++ /dev/null @@ -1,425 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2022 Radxa Limited - * Copyright (c) 2022 Amarula Solutions(India) - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> - -/ { - compatible = "radxa,cm3", "rockchip,rk3566"; - - aliases { - mmc0 = &sdhci; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_STATUS; - linux,default-trigger = "timer"; - default-state = "on"; - pinctrl-names = "default"; - pinctrl-0 = <&user_led2>; - }; - }; - - vcc_sys: vcc-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc_1v8: vcc-1v8-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8_p>; - }; - - vcc_3v3: vcc-3v3-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - }; - - vcca_1v8: vcca-1v8-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8_p>; - }; - - sdio_pwrseq: pwrseq-sdio { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk817 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_reg_on_h>; - reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&gpu { - mali-supply = <&vdd_gpu_npu>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1390000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - #clock-cells = <1>; - clock-output-names = "rk817-clkout1", "rk817-clkout2"; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc5-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdd_gpu_npu: DCDC_REG2 { - regulator-name = "vdd_gpu_npu"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc3v3_sys: DCDC_REG4 { - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca1v8_pmu: LDO_REG1 { - regulator-name = "vcca1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-name = "vdda_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-name = "vdda0v9_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-name = "vccio_acodec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-name = "vcc3v3_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8_p: LDO_REG7 { - regulator-name = "vcc_1v8_p"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_dvp: LDO_REG8 { - regulator-name = "vcc1v8_dvp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc2v8_dvp: LDO_REG9 { - regulator-name = "vcc2v8_dvp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - }; - }; -}; - -&pinctrl { - bluetooth { - bt_host_wake_h: bt-host-wake-h { - rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_reg_on_h: bt-reg-on-h { - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_wake_host_h: bt-wake-host-h { - rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - user_led2: user-led2 { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - wifi { - wifi_reg_on_h: wifi-reg-on-h { - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wifi_host_wake_h: wifi-host-wake-h { - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc_3v3>; - vccio1-supply = <&vccio_acodec>; - vccio2-supply = <&vcc_1v8>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_3v3>; - vccio7-supply = <&vcc_3v3>; - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca_1v8>; - status = "okay"; -}; - -&sdmmc1 { - #address-cells = <1>; - #size-cells = <0>; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>; - sd-uhs-sdr104; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; - - wifi@1 { - compatible = "brcm,bcm43455-fmac"; - reg = <1>; - interrupt-parent = <&gpio2>; - interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake_h>; - }; -}; - -&sdhci { - bus-width = <8>; - max-frequency = <200000000>; - mmc-hs200-1_8v; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm4345c5"; - clocks = <&rk817 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>; - vbat-supply = <&vcc_3v3>; - vddio-supply = <&vcc_1v8>; - }; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy1 { - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; diff --git a/arch/arm/dts/rk3566-soquartz-blade.dts b/arch/arm/dts/rk3566-soquartz-blade.dts deleted file mode 100644 index fdbf1c783242..000000000000 --- a/arch/arm/dts/rk3566-soquartz-blade.dts +++ /dev/null @@ -1,198 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/rockchip.h> - -#include "rk3566-soquartz.dtsi" - -/ { - model = "PINE64 RK3566 SOQuartz on Blade carrier board"; - compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566"; - - aliases { - ethernet0 = &gmac1; - }; - - /* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */ - vcc3v0_sd: vcc3v0-sd-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v0_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - }; - - /* labeled VCC_SSD in schematic */ - vcc3v3_pcie_p: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pcie_p"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vbus>; - }; - - vcc5v_dcin: vcc5v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; -}; - -&combphy2 { - phy-supply = <&vcc3v3_sys>; - status = "okay"; -}; - -&gmac1 { - status = "okay"; -}; - -/* - * i2c1 is exposed on CM1 / Module1A - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu - */ -&i2c1 { - status = "okay"; - -}; - -/* - * i2c2 is exposed on CM1 / Module1A - to PI40 - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 - */ -&i2c2 { - status = "disabled"; -}; - -/* - * i2c3 is exposed on CM1 / Module1A - to PI40 - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 - */ -&i2c3 { - status = "disabled"; -}; - -/* - * i2c4 is exposed on CM2 / Module1B - to PI40 - * pin 45 - GPIO24 - i2c4_scl_m1 - * pin 47 - GPIO23 - i2c4_sda_m1 - */ -&i2c4 { - status = "disabled"; -}; - -/* - * i2s1_8ch is exposed on CM1 / Module1A - to PI40 - * pin 24 - GPIO26 - i2s1_sdi1_m1 - * pin 25 - GPIO21 - i2s1_sdo0_m1 - * pin 26 - GPIO19 - i2s1_lrck_tx_m1 - * pin 27 - GPIO20 - i2s1_sdi0_m1 - * pin 29 - GPIO16 - i2s1_sdi3_m1 - * pin 30 - GPIO6 - i2s1_sdi2_m1 - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 - * pin 41 - GPIO25 - i2s1_sdo2_m1 - * pin 49 - GPIO18 - i2s1_sclk_tx_m1 - * pin 50 - GPIO17 - i2s1_mclk_m1 - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 - */ -&i2s1_8ch { - status = "disabled"; -}; - -&led_diy { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_DISK_ACTIVITY; - linux,default-trigger = "disk-activity"; - status = "okay"; -}; - -&led_work { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_STATUS; - linux,default-trigger = "heartbeat"; - status = "okay"; -}; - -&pcie2x1 { - vpcie3v3-supply = <&vcc3v3_pcie_p>; - status = "okay"; -}; - -&rgmii_phy1 { - status = "okay"; -}; - -/* - * saradc is exposed on CM1 / Module1A - to J2 - * pin 94 - AIN1 - saradc_vin3 - * pin 96 - AIN0 - saradc_vin2 - */ -&saradc { - status = "disabled"; -}; - -&sdmmc0 { - vmmc-supply = <&vcc3v0_sd>; - status = "okay"; -}; - -/* - * spi3 is exposed on CM1 / Module1A - to PI40 - * pin 37 - GPIO7 - spi3_cs1_m0 - * pin 38 - GPIO11 - spi3_clk_m0 - * pin 39 - GPIO8 - spi3_cs0_m0 - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch - * pin 44 - GPIO10 - spi3_mosi_m0 - */ -&spi3 { - status = "disabled"; -}; - -/* - * uart2 is exposed on CM1 / Module1A - to PI40 - * pin 51 - GPIO15 - uart2_rx_m0 - * pin 55 - GPIO14 - uart2_tx_m0 - */ -&uart2 { - status = "okay"; -}; - -/* - * uart7 is exposed on CM1 / Module1A - to PI40 - * pin 46 - GPIO22 - uart7_tx_m2 - * pin 47 - GPIO23 - uart7_rx_m2 - */ -&uart7 { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vbus>; - status = "okay"; -}; - -&usb_host0_xhci { - status = "okay"; -}; - -&vbus { - vin-supply = <&vcc5v_dcin>; -}; diff --git a/arch/arm/dts/rk3566-soquartz-cm4.dts b/arch/arm/dts/rk3566-soquartz-cm4.dts deleted file mode 100644 index 6ed3fa4aee34..000000000000 --- a/arch/arm/dts/rk3566-soquartz-cm4.dts +++ /dev/null @@ -1,196 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include "rk3566-soquartz.dtsi" - -/ { - model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board"; - compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566"; - - aliases { - ethernet0 = &gmac1; - }; - - /* labeled +12v in schematic */ - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* labeled +5v in schematic */ - vcc_5v: vcc-5v-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_5v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc_sd_pwr: vcc-sd-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sd_pwr"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - }; -}; - -/* phy for pcie */ -&combphy2 { - phy-supply = <&vcc3v3_sys>; - status = "okay"; -}; - -&gmac1 { - status = "okay"; -}; - -/* - * i2c1 is exposed on CM1 / Module1A - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu - */ -&i2c1 { - status = "okay"; - - /* - * the rtc interrupt is tied to PMIC_PWRON, - * it will force reset the board if triggered. - */ - pcf85063: rtc@51 { - compatible = "nxp,pcf85063"; - reg = <0x51>; - }; -}; - -/* - * i2c2 is exposed on CM1 / Module1A - to PI40 - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 - */ -&i2c2 { - status = "disabled"; -}; - -/* - * i2c3 is exposed on CM1 / Module1A - to PI40 - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 - */ -&i2c3 { - status = "disabled"; -}; - -/* - * i2c4 is exposed on CM2 / Module1B - to PI40 - * pin 45 - GPIO24 - i2c4_scl_m1 - * pin 47 - GPIO23 - i2c4_sda_m1 - */ -&i2c4 { - status = "disabled"; -}; - -/* - * i2s1_8ch is exposed on CM1 / Module1A - to PI40 - * pin 24 - GPIO26 - i2s1_sdi1_m1 - * pin 25 - GPIO21 - i2s1_sdo0_m1 - * pin 26 - GPIO19 - i2s1_lrck_tx_m1 - * pin 27 - GPIO20 - i2s1_sdi0_m1 - * pin 29 - GPIO16 - i2s1_sdi3_m1 - * pin 30 - GPIO6 - i2s1_sdi2_m1 - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 - * pin 41 - GPIO25 - i2s1_sdo2_m1 - * pin 49 - GPIO18 - i2s1_sclk_tx_m1 - * pin 50 - GPIO17 - i2s1_mclk_m1 - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 - */ -&i2s1_8ch { - status = "disabled"; -}; - -&led_diy { - status = "okay"; -}; - -&led_work { - status = "okay"; -}; - -&pcie2x1 { - vpcie3v3-supply = <&vcc_3v3>; - status = "okay"; -}; - -&rgmii_phy1 { - status = "okay"; -}; - -/* - * saradc is exposed on CM1 / Module1A - to J2 - * pin 94 - AIN1 - saradc_vin3 - * pin 96 - AIN0 - saradc_vin2 - */ -&saradc { - status = "disabled"; -}; - -&sdmmc0 { - vmmc-supply = <&vcc_sd_pwr>; - status = "okay"; -}; - -/* - * spi3 is exposed on CM1 / Module1A - to PI40 - * pin 37 - GPIO7 - spi3_cs1_m0 - * pin 38 - GPIO11 - spi3_clk_m0 - * pin 39 - GPIO8 - spi3_cs0_m0 - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch - * pin 44 - GPIO10 - spi3_mosi_m0 - */ -&spi3 { - status = "disabled"; -}; - -/* - * uart2 is exposed on CM1 / Module1A - to PI40 - * pin 51 - GPIO15 - uart2_rx_m0 - * pin 55 - GPIO14 - uart2_tx_m0 - */ -&uart2 { - status = "okay"; -}; - -/* - * uart7 is exposed on CM1 / Module1A - to PI40 - * pin 46 - GPIO22 - uart7_tx_m2 - * pin 47 - GPIO23 - uart7_rx_m2 - */ -&uart7 { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vcc_5v>; - status = "okay"; -}; - -&usb_host0_xhci { - status = "okay"; -}; - -&vbus { - vin-supply = <&vcc_5v>; -}; diff --git a/arch/arm/dts/rk3566-soquartz-model-a.dts b/arch/arm/dts/rk3566-soquartz-model-a.dts deleted file mode 100644 index f2095dfa4eaf..000000000000 --- a/arch/arm/dts/rk3566-soquartz-model-a.dts +++ /dev/null @@ -1,236 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include "rk3566-soquartz.dtsi" - -/ { - model = "PINE64 RK3566 SOQuartz on Model A carrier board"; - compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566"; - - aliases { - ethernet0 = &gmac1; - }; - - /* labeled DCIN_12V in schematic */ - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc5v0_usb: vcc5v0-usb-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - /* - * Labelled VCC3V0_SD in schematic to not conflict with PMIC - * regulator, it's 3.3v in actuality - */ - vcc3v0_sd: vcc3v0-sd-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v0_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc12v_pcie: vcc12v-pcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_pcie"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&vcc12v_dcin>; - }; -}; - -/* phy for pcie */ -&combphy2 { - phy-supply = <&vcc3v3_sys>; - status = "okay"; -}; - -&gmac1 { - status = "okay"; -}; - -/* - * i2c1 is exposed on CM1 / Module1A - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu - */ -&i2c1 { - status = "okay"; - - /* - * the rtc interrupt is tied to PMIC_PWRON, - * it will force reset the board if triggered. - */ - pcf85063: rtc@51 { - compatible = "nxp,pcf85063"; - reg = <0x51>; - }; -}; - -/* - * i2c2 is exposed on CM1 / Module1A - to PI40 - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 - */ -&i2c2 { - status = "disabled"; -}; - -/* - * i2c3 is exposed on CM1 / Module1A - to PI40 - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 - */ -&i2c3 { - status = "disabled"; -}; - -/* - * i2c4 is exposed on CM2 / Module1B - to PI40 - * pin 45 - GPIO24 - i2c4_scl_m1 - * pin 47 - GPIO23 - i2c4_sda_m1 - */ -&i2c4 { - status = "disabled"; -}; - -/* - * i2s1_8ch is exposed on CM1 / Module1A - to PI40 - * pin 24 - GPIO26 - i2s1_sdi1_m1 - * pin 25 - GPIO21 - i2s1_sdo0_m1 - * pin 26 - GPIO19 - i2s1_lrck_tx_m1 - * pin 27 - GPIO20 - i2s1_sdi0_m1 - * pin 29 - GPIO16 - i2s1_sdi3_m1 - * pin 30 - GPIO6 - i2s1_sdi2_m1 - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 - * pin 41 - GPIO25 - i2s1_sdo2_m1 - * pin 49 - GPIO18 - i2s1_sclk_tx_m1 - * pin 50 - GPIO17 - i2s1_mclk_m1 - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 - */ -&i2s1_8ch { - status = "disabled"; -}; - -&led_diy { - status = "okay"; -}; - -&led_work { - status = "okay"; -}; - -&pcie2x1 { - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&rgmii_phy1 { - status = "okay"; -}; - -&rgmii_phy1 { - status = "okay"; -}; - -/* - * saradc is exposed on CM1 / Module1A - to J2 - * pin 94 - AIN1 - saradc_vin3 - * pin 96 - AIN0 - saradc_vin2 - */ -&saradc { - status = "disabled"; -}; - -/* - * vmmc-supply is vcc3v3_sd on v1.0 and vcc3v0_sd on v1.1+ - * the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys, - * so we use vcc3v3_sd here to ensure the regulator is enabled on older boards. - */ -&sdmmc0 { - vmmc-supply = <&vcc3v3_sd>; - status = "okay"; -}; - -/* - * spi3 is exposed on CM1 / Module1A - to PI40 - * pin 37 - GPIO7 - spi3_cs1_m0 - * pin 38 - GPIO11 - spi3_clk_m0 - * pin 39 - GPIO8 - spi3_cs0_m0 - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch - * pin 44 - GPIO10 - spi3_mosi_m0 - */ -&spi3 { - status = "disabled"; -}; - -/* - * uart2 is exposed on CM1 / Module1A - to PI40 - * pin 51 - GPIO15 - uart2_rx_m0 - * pin 55 - GPIO14 - uart2_tx_m0 - */ -&uart2 { - status = "okay"; -}; - -/* - * uart7 is exposed on CM1 / Module1A - to PI40 - * pin 46 - GPIO22 - uart7_tx_m2 - * pin 47 - GPIO23 - uart7_rx_m2 - */ -&uart7 { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vcc5v0_usb>; - status = "okay"; -}; - -&usb_host0_xhci { - status = "okay"; -}; - -&vbus { - vin-supply = <&vcc5v0_usb>; -}; - -&vcc3v3_sd { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - status = "okay"; -}; diff --git a/arch/arm/dts/rk3566-soquartz.dtsi b/arch/arm/dts/rk3566-soquartz.dtsi deleted file mode 100644 index bfb7b952f4c5..000000000000 --- a/arch/arm/dts/rk3566-soquartz.dtsi +++ /dev/null @@ -1,684 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3566.dtsi" - -/ { - model = "Pine64 RK3566 SoQuartz SOM"; - compatible = "pine64,soquartz", "rockchip,rk3566"; - - aliases { - mmc0 = &sdmmc0; - mmc1 = &sdhci; - mmc2 = &sdmmc1; - }; - - chosen: chosen { - stdout-path = "serial2:1500000n8"; - }; - - gmac1_clkin: external-gmac1-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac1_clkin"; - #clock-cells = <0>; - }; - - hdmi-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_diy: led-diy { - label = "diy-led"; - default-state = "on"; - gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - pinctrl-names = "default"; - pinctrl-0 = <&diy_led_enable_h>; - retain-state-suspended; - status = "disabled"; - }; - - led_work: led-work { - label = "work-led"; - default-state = "off"; - gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&work_led_enable_h>; - retain-state-suspended; - status = "disabled"; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - status = "okay"; - compatible = "mmc-pwrseq-simple"; - clocks = <&rk809 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; - }; - - vbus: vbus-regulator { - compatible = "regulator-fixed"; - regulator-name = "vbus"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - /* sourced from vbus, vbus is provided by the carrier board */ - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vbus>; - }; - - vcc3v3_sys: vcc3v3-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&gmac1 { - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; - clock_in_out = "input"; - phy-supply = <&vcc_3v3>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac1m0_miim - &gmac1m0_tx_bus2 - &gmac1m0_rx_bus2 - &gmac1m0_rgmii_clk - &gmac1m0_clkinout - &gmac1m0_rgmii_bus>; - snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 20ms, 100ms for rtl8211f, also works well here */ - snps,reset-delays-us = <0 20000 100000>; - tx_delay = <0x30>; - rx_delay = <0x10>; - phy-handle = <&rgmii_phy1>; - status = "disabled"; -}; - -&gpio0 { - nextrst-hog { - gpio-hog; - /* - * GPIO_ACTIVE_LOW + output-low here means that the pin is set - * to high, because output-low decides the value pre-inversion. - */ - gpios = <RK_PA5 GPIO_ACTIVE_LOW>; - line-name = "nEXTRST"; - output-low; - }; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vdda0v9_image>; - avdd-1v8-supply = <&vcca1v8_image>; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <2300>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-name = "vcc_ddr"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_npu"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda0v9_image"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda_0v9"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda0v9_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_acodec"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca_1v8"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca1v8_pmu"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca1v8_image"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-name = "vcc_3v3"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-name = "vcc3v3_sd"; - status = "disabled"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - }; - }; -}; - -/* - * i2c1 is exposed on CM1 / Module1A - * pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu - * pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu - */ -&i2c1 { - status = "disabled"; -}; - -/* - * i2c2 is exposed on CM1 / Module1A - * pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch - * pin 58 - i2c2_sda_m1, pullup to vcc_3v3 - */ -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2m1_xfer>; - status = "disabled"; -}; - -/* - * i2c3 is exposed on CM1 / Module1A - * pin 35 - i2c3_scl_m0, pullup to vcc_3v3 - * pin 36 - i2c3_sda_m0, pullup to vcc_3v3 - */ -&i2c3 { - status = "disabled"; -}; - -/* - * i2c4 is exposed on CM2 / Module1B - * pin 45 - i2c4_scl_m1 - * pin 47 - i2c4_sda_m1 - */ -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4m1_xfer>; - status = "disabled"; -}; - -&i2s0_8ch { - status = "okay"; -}; - -/* - * i2s1_8ch is exposed on CM1 / Module1A - * pin 24 - i2s1_sdi1_m1 - * pin 25 - i2s1_sdo0_m1 - * pin 26 - i2s1_lrck_tx_m1 - * pin 27 - i2s1_sdi0_m1 - * pin 29 - i2s1_sdi3_m1 - * pin 30 - i2s1_sdi2_m1 - * pin 40 - i2s1_sdo1_m1, shared with spi3 - * pin 41 - i2s1_sdo2_m1 - * pin 49 - i2s1_sclk_tx_m1 - * pin 50 - i2s1_mclk_m1 - * pin 56 - i2s1_sdo3_m1, shared with i2c2 - */ -&i2s1_8ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx - &i2s1m1_lrcktx &i2s1m1_lrckrx - &i2s1m1_sdi0 &i2s1m1_sdi1 - &i2s1m1_sdi2 &i2s1m1_sdi3 - &i2s1m1_sdo0 &i2s1m1_sdo1 - &i2s1m1_sdo2 &i2s1m1_sdo3>; - status = "disabled"; -}; - -&mdio1 { - rgmii_phy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - status = "disabled"; - }; -}; - -&pcie2x1 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_h>; - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; -}; - -&pinctrl { - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - work_led_enable_h: work-led-enable-h { - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - diy_led_enable_h: diy-led-enable-h { - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_clkreq_h: pcie-clkreq-h { - rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - pcie_reset_h: pcie-reset-h { - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vcc_3v3>; - vccio2-supply = <&vcc_1v8>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_3v3>; - vccio7-supply = <&vcc_3v3>; - status = "okay"; -}; - -/* - * saradc is exposed on CM1 / Module1A - * pin 94 - saradc_vin3 - * pin 96 - saradc_vin2 - */ -&saradc { - vref-supply = <&vcca_1v8>; - status = "disabled"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc0 { - broken-cd; - bus-width = <4>; - cap-sd-highspeed; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - vqmmc-supply = <&vccio_sd>; - status = "disabled"; -}; - -&sdmmc1 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; - sd-uhs-sdr50; - vmmc-supply = <&vcc3v3_sys>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -/* - * spi3 is exposed on CM1 / Module1A - * pin 37 - spi3_cs1_m0 - * pin 38 - spi3_clk_m0 - * pin 39 - spi3_cs0_m0 - * pin 40 - spi3_miso_m0, shared with i2s1_8ch - * pin 44 - spi3_mosi_m0 - */ -&spi3 { - status = "disabled"; -}; - -&tsadc { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rk809 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; - vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcca1v8_pmu>; - }; -}; - -/* - * uart2 is exposed on CM1 / Module1A - * pin 51 - uart2_rx_m0 - * pin 55 - uart2_tx_m0 - */ -&uart2 { - status = "disabled"; -}; - -/* - * uart7 is exposed on CM1 / Module1A - * pin 46 - uart7_tx_m2 - * pin 47 - uart7_rx_m2 - */ -&uart7 { - pinctrl-names = "default"; - pinctrl-0 = <&uart7m2_xfer>; - status = "disabled"; -}; - -/* dwc3_otg is the only usb port available */ -&usb2phy0 { - status = "disabled"; -}; - -&usb2phy0_otg { - status = "disabled"; -}; - -&usb_host0_xhci { - status = "disabled"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi_in_vp0>; - }; -}; diff --git a/arch/arm/dts/rk3566.dtsi b/arch/arm/dts/rk3566.dtsi deleted file mode 100644 index 6c4b17d27bdc..000000000000 --- a/arch/arm/dts/rk3566.dtsi +++ /dev/null @@ -1,35 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -#include "rk356x.dtsi" - -/ { - compatible = "rockchip,rk3566"; -}; - -&pipegrf { - compatible = "rockchip,rk3566-pipe-grf", "syscon"; -}; - -&power { - power-domain@RK3568_PD_PIPE { - reg = <RK3568_PD_PIPE>; - clocks = <&cru PCLK_PIPE>; - pm_qos = <&qos_pcie2x1>, - <&qos_sata1>, - <&qos_sata2>, - <&qos_usb3_0>, - <&qos_usb3_1>; - #power-domain-cells = <0>; - }; -}; - -&usb_host0_xhci { - phys = <&usb2phy0_otg>; - phy-names = "usb2-phy"; - extcon = <&usb2phy0>; - maximum-speed = "high-speed"; -}; - -&vop { - compatible = "rockchip,rk3566-vop"; -}; diff --git a/arch/arm/dts/rk3568-bpi-r2-pro.dts b/arch/arm/dts/rk3568-bpi-r2-pro.dts deleted file mode 100644 index f9127ddfbb7d..000000000000 --- a/arch/arm/dts/rk3568-bpi-r2-pro.dts +++ /dev/null @@ -1,852 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Author: Frank Wunderlich <frank-w@public-files.de> - * - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3568.dtsi" - -/ { - model = "Bananapi-R2 Pro (RK3568) DDR4 Board"; - compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568"; - - aliases { - ethernet0 = &gmac0; - ethernet1 = &gmac1; - mmc0 = &sdmmc0; - mmc1 = &sdhci; - }; - - chosen: chosen { - stdout-path = "serial2:1500000n8"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&blue_led_pin &green_led_pin>; - - blue_led: led-0 { - color = <LED_COLOR_ID_BLUE>; - default-state = "off"; - function = LED_FUNCTION_STATUS; - gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; - }; - - green_led: led-1 { - color = <LED_COLOR_ID_GREEN>; - default-state = "on"; - function = LED_FUNCTION_POWER; - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; - }; - }; - - dc_12v: dc-12v-regulator { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - hdmi-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_receiver_pin>; - }; - - vcc3v3_sys: vcc3v3-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - pcie30_avdd0v9: pcie30-avdd0v9-regulator { - compatible = "regulator-fixed"; - regulator-name = "pcie30_avdd0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - vin-supply = <&vcc3v3_sys>; - }; - - pcie30_avdd1v8: pcie30-avdd1v8-regulator { - compatible = "regulator-fixed"; - regulator-name = "pcie30_avdd1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc3v3_sys>; - }; - - /* pi6c pcie clock generator feeds both ports */ - vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pcie"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; - startup-delay-us = <200000>; - vin-supply = <&vcc5v0_sys>; - }; - - /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ - vcc3v3_minipcie: vcc3v3-minipcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_minipcie"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&minipcie_enable_h>; - startup-delay-us = <50000>; - vin-supply = <&vcc3v3_pi6c_05>; - }; - - /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ - vcc3v3_ngff: vcc3v3-ngff-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_ngff"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&ngffpcie_enable_h>; - startup-delay-us = <50000>; - vin-supply = <&vcc3v3_pi6c_05>; - }; - - vcc5v0_usb: vcc5v0-usb-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_usb_host: vcc5v0-usb-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb_host_en>; - regulator-name = "vcc5v0_usb_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb_otg_en>; - regulator-name = "vcc5v0_usb_otg"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; -}; - -&combphy0 { - /* used for USB3 */ - status = "okay"; -}; - -&combphy1 { - /* used for USB3 */ - status = "okay"; -}; - -&combphy2 { - /* used for SATA */ - status = "okay"; -}; - -&gmac0 { - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; - clock_in_out = "input"; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac0_miim - &gmac0_tx_bus2 - &gmac0_rx_bus2 - &gmac0_rgmii_clk - &gmac0_rgmii_bus>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 20ms, 100ms for rtl8211f */ - snps,reset-delays-us = <0 20000 100000>; - tx_delay = <0x4f>; - rx_delay = <0x0f>; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; -}; - -&gmac1 { - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; - clock_in_out = "output"; - phy-handle = <&rgmii_phy1>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac1m1_miim - &gmac1m1_tx_bus2 - &gmac1m1_rx_bus2 - &gmac1m1_rgmii_clk - &gmac1m1_rgmii_bus>; - - snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 20ms, 100ms for rtl8211f */ - snps,reset-delays-us = <0 20000 100000>; - - tx_delay = <0x3c>; - rx_delay = <0x2f>; - - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vdda0v9_image>; - avdd-1v8-supply = <&vcca1v8_image>; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; - rockchip,system-power-controller; - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - wakeup-source; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-name = "vdd_npu"; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-name = "vdda0v9_image"; - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-name = "vdda_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-name = "vdda0v9_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-name = "vccio_acodec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-name = "vcc3v3_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-name = "vcca1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-name = "vcca1v8_image"; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-name = "vcc3v3_sd"; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&i2c3 { - status = "okay"; - - hym8563: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>; - #clock-cells = <0>; - clock-output-names = "rtcic_32kout"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - wakeup-source; - }; -}; - -&i2c5 { - /* pin 3 (SDA) + 4 (SCL) of header con2 */ - status = "disabled"; -}; - -&i2s0_8ch { - /* hdmi sound */ - status = "okay"; -}; - -&mdio0 { - #address-cells = <1>; - #size-cells = <0>; - - switch@0 { - compatible = "mediatek,mt7531"; - reg = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - label = "lan0"; - }; - - port@2 { - reg = <2>; - label = "lan1"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - }; - - port@4 { - reg = <4>; - label = "lan3"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; - }; - }; - }; -}; - -&mdio1 { - rgmii_phy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - }; -}; - -&pcie30phy { - data-lanes = <1 2>; - phy-supply = <&vcc3v3_pi6c_05>; - status = "okay"; -}; - -&pcie3x1 { - /* M.2 slot */ - num-lanes = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&ngffpcie_reset_h>; - reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_ngff>; - status = "okay"; -}; - -&pcie3x2 { - /* mPCIe slot */ - num-lanes = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&minipcie_reset_h>; - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_minipcie>; - status = "okay"; -}; - -&pinctrl { - leds { - blue_led_pin: blue-led-pin { - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - green_led_pin: green-led-pin { - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - ir-receiver { - ir_receiver_pin: ir-receiver-pin { - rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - minipcie_enable_h: minipcie-enable-h { - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; - }; - - ngffpcie_enable_h: ngffpcie-enable-h { - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; - }; - - minipcie_reset_h: minipcie-reset-h { - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; - }; - - ngffpcie_reset_h: ngffpcie-reset-h { - rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; - }; - }; - - pmic { - pmic_int: pmic_int { - rockchip,pins = - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb { - vcc5v0_usb_host_en: vcc5v0_usb_host_en { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_3v3>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_1v8>; - vccio7-supply = <&vcc_3v3>; - status = "okay"; -}; - -&pwm8 { - /* fan 5v - gnd - pwm */ - status = "okay"; -}; - -&pwm10 { - /* pin 7 of header con2 */ - status = "disabled"; -}; - -&pwm11 { - /* pin 15 of header con2 */ - status = "disabled"; -}; - -&pwm12 { - /* pin 21 of header con2 */ - /* shared with uart9 + spi3 */ - pinctrl-0 = <&pwm12m1_pins>; - status = "disabled"; -}; - -&pwm13 { - /* pin 24 of header con2 */ - /* shared with uart9 */ - pinctrl-0 = <&pwm13m1_pins>; - status = "disabled"; -}; - -&pwm14 { - /* pin 23 of header con2 */ - /* shared with spi3 */ - pinctrl-0 = <&pwm14m1_pins>; - status = "disabled"; -}; - -&pwm15 { - /* pin 19 of header con2 */ - /* shared with spi3 */ - pinctrl-0 = <&pwm15m1_pins>; - status = "disabled"; -}; - -&saradc { - vref-supply = <&vcca_1v8>; - status = "okay"; -}; - -&sata2 { - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - max-frequency = <200000000>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; - status = "okay"; -}; - -&sdmmc0 { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v3_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&spi3 { - /* pin 19 (MO) + 21 (MI) + 23 (CK) of header con2 */ - /* shared with pwm12/14/15 and uart9 */ - pinctrl-0 = <&spi3m1_pins>; - status = "disabled"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&uart0 { - /* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */ - status = "disabled"; -}; - -&uart2 { - /* debug-uart */ - status = "okay"; -}; - -&uart7 { - /* pin 11 (TX) + 13 (RX) of header con2 */ - pinctrl-0 = <&uart7m1_xfer>; - status = "disabled"; -}; - -&uart9 { - /* pin 21 (TX) + 24 (RX) of header con2 */ - /* shared with pwm13 and pwm12/spi3 */ - pinctrl-0 = <&uart9m1_xfer>; - status = "disabled"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host0_xhci { - dr_mode = "host"; - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb_host1_xhci { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_host { - phy-supply = <&vcc5v0_usb_host>; - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vcc5v0_usb_otg>; - status = "okay"; -}; - -&usb2phy1 { - /* USB for PCIe/M2 */ - status = "okay"; -}; - -&usb2phy1_host { - status = "okay"; -}; - -&usb2phy1_otg { - status = "okay"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi_in_vp0>; - }; -}; diff --git a/arch/arm/dts/rk3568-evb.dts b/arch/arm/dts/rk3568-evb.dts deleted file mode 100644 index 19f8fc369b13..000000000000 --- a/arch/arm/dts/rk3568-evb.dts +++ /dev/null @@ -1,689 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. - * - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3568.dtsi" - -/ { - model = "Rockchip RK3568 EVB1 DDR4 V10 Board"; - compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568"; - - aliases { - ethernet0 = &gmac0; - ethernet1 = &gmac1; - mmc0 = &sdmmc0; - mmc1 = &sdhci; - }; - - chosen: chosen { - stdout-path = "serial2:1500000n8"; - }; - - dc_12v: dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - hdmi-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_work: led-0 { - gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_HEARTBEAT; - color = <LED_COLOR_ID_BLUE>; - linux,default-trigger = "heartbeat"; - pinctrl-names = "default"; - pinctrl-0 = <&led_work_en>; - }; - }; - - rk809-sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "Analog RK809"; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,cpu { - sound-dai = <&i2s1_8ch>; - }; - simple-audio-card,codec { - sound-dai = <&rk809>; - }; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_usb: vcc5v0-usb { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_usb_host: vcc5v0-usb-host { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb_host_en>; - regulator-name = "vcc5v0_usb_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_usb_otg: vcc5v0-usb-otg { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb_otg_en>; - regulator-name = "vcc5v0_usb_otg"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc3v3_lcd0_n: vcc3v3-lcd0-n { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_lcd0_n"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; - vin-supply = <&vcc3v3_sys>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc3v3_lcd0_n_en>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_lcd1_n: vcc3v3-lcd1-n { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_lcd1_n"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; - vin-supply = <&vcc3v3_sys>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc3v3_lcd1_n_en>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&combphy0 { - status = "okay"; -}; - -&combphy1 { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&gmac0 { - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; - assigned-clock-rates = <0>, <125000000>; - clock_in_out = "output"; - phy-handle = <&rgmii_phy0>; - phy-mode = "rgmii-id"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac0_miim - &gmac0_tx_bus2 - &gmac0_rx_bus2 - &gmac0_rgmii_clk - &gmac0_rgmii_bus>; - status = "okay"; -}; - -&gmac1 { - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; - assigned-clock-rates = <0>, <125000000>; - clock_in_out = "output"; - phy-handle = <&rgmii_phy1>; - phy-mode = "rgmii-id"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac1m1_miim - &gmac1m1_tx_bus2 - &gmac1m1_rx_bus2 - &gmac1m1_rgmii_clk - &gmac1m1_rgmii_bus>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vdda0v9_image>; - avdd-1v8-supply = <&vcca1v8_image>; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; - #clock-cells = <1>; - clock-names = "mclk"; - clocks = <&cru I2S1_MCLKOUT_TX>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; - rockchip,system-power-controller; - #sound-dai-cells = <0>; - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - wakeup-source; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-name = "vdd_npu"; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-name = "vdda0v9_image"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-name = "vdda_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-name = "vdda0v9_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-name = "vccio_acodec"; - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-name = "vcc3v3_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-name = "vcca1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-name = "vcca1v8_image"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-name = "vcc3v3_sd"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - - codec { - mic-in-differential; - }; - }; -}; - -&i2c1 { - status = "okay"; - - touchscreen0: goodix@14 { - compatible = "goodix,gt1151"; - reg = <0x14>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; - AVDD28-supply = <&vcc3v3_lcd0_n>; - irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&touch_int &touch_rst>; - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; - VDDIO-supply = <&vcc3v3_lcd0_n>; - }; -}; - -&i2s0_8ch { - status = "okay"; -}; - -&i2s1_8ch { - rockchip,trcm-sync-tx-only; - status = "okay"; -}; - -&mdio0 { - rgmii_phy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - reset-assert-us = <20000>; - reset-deassert-us = <100000>; - reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; - }; -}; - -&mdio1 { - rgmii_phy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - reset-assert-us = <20000>; - reset-deassert-us = <100000>; - reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; - }; -}; - -&pinctrl { - display { - vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en { - rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>; - }; - vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en { - rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; - }; - }; - - leds { - led_work_en: led_work_en { - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic_int { - rockchip,pins = - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - touchscreen { - touch_int: touch_int { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - touch_rst: touch_rst { - rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - vcc5v0_usb_host_en: vcc5v0_usb_host_en { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio2-supply = <&vcc_1v8>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_1v8>; - vccio7-supply = <&vcc_3v3>; - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca_1v8>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - max-frequency = <200000000>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; - status = "okay"; -}; - -&sdmmc0 { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v3_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host0_xhci { - extcon = <&usb2phy0>; - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb_host1_xhci { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_host { - phy-supply = <&vcc5v0_usb_host>; - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vcc5v0_usb_otg>; - status = "okay"; -}; - -&usb2phy1 { - status = "okay"; -}; - -&usb2phy1_host { - phy-supply = <&vcc5v0_usb_host>; - status = "okay"; -}; - -&usb2phy1_otg { - phy-supply = <&vcc5v0_usb_host>; - status = "okay"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi_in_vp0>; - }; -}; diff --git a/arch/arm/dts/rk3568-lubancat-2.dts b/arch/arm/dts/rk3568-lubancat-2.dts deleted file mode 100644 index a8a4cc190eb3..000000000000 --- a/arch/arm/dts/rk3568-lubancat-2.dts +++ /dev/null @@ -1,730 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/* - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. - * Copyright (c) 2022 EmbedFire <embedfire@embedfire.com> - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3568.dtsi" - -/ { - model = "EmbedFire LubanCat 2"; - compatible = "embedfire,lubancat-2", "rockchip,rk3568"; - - aliases { - ethernet0 = &gmac0; - ethernet1 = &gmac1; - mmc0 = &sdmmc0; - mmc1 = &sdhci; - }; - - chosen: chosen { - stdout-path = "serial2:1500000n8"; - }; - - leds { - compatible = "gpio-leds"; - - user_led: user-led { - label = "user_led"; - linux,default-trigger = "heartbeat"; - default-state = "on"; - gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&user_led_pin>; - }; - }; - - hdmi-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - dc_5v: dc-5v-regulator { - compatible = "regulator-fixed"; - regulator-name = "dc_5v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc3v3_sys: vcc3v3-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_5v>; - }; - - vcc3v3_m2_pcie: vcc3v3-m2-pcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "m2_pcie_3v3"; - enable-active-high; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&vcc3v3_m2_pcie_en>; - pinctrl-names = "default"; - startup-delay-us = <200000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_mini_pcie: vcc3v3-mini-pcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "minipcie_3v3"; - enable-active-high; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&vcc3v3_mini_pcie_en>; - pinctrl-names = "default"; - startup-delay-us = <5000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_usb20_host: vcc5v0-usb20-host-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb20_host"; - enable-active-high; - gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&vcc5v0_usb20_host_en>; - pinctrl-names = "default"; - }; - - vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb30_host"; - enable-active-high; - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&vcc5v0_usb30_host_en>; - pinctrl-names = "default"; - }; - - vcc5v0_otg_vbus: vcc5v0-otg-vbus-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_otg_vbus"; - enable-active-high; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&vcc5v0_otg_vbus_en>; - pinctrl-names = "default"; - }; -}; - -&combphy0 { - status = "okay"; -}; - -&combphy1 { - status = "okay"; -}; - -&combphy2 { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vdda0v9_image>; - avdd-1v8-supply = <&vcca1v8_image>; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; - #clock-cells = <1>; - clock-names = "mclk"; - clocks = <&cru I2S1_MCLKOUT_TX>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; - rockchip,system-power-controller; - #sound-dai-cells = <0>; - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - wakeup-source; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-name = "vdd_npu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-name = "vdda0v9_image"; - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-name = "vdda_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-name = "vdda0v9_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-name = "vccio_acodec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-name = "vcc3v3_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-name = "vcca1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-name = "vcca1v8_image"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-name = "vcc3v3_sd"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&i2s1_8ch { - rockchip,trcm-sync-tx-only; - status = "okay"; -}; - -&gmac0 { - phy-mode = "rgmii"; - clock_in_out = "output"; - - snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 20ms, 100ms for rtl8211f */ - snps,reset-delays-us = <0 20000 100000>; - - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; - - pinctrl-names = "default"; - pinctrl-0 = <&gmac0_miim - &gmac0_tx_bus2 - &gmac0_rx_bus2 - &gmac0_rgmii_clk - &gmac0_rgmii_bus>; - - tx_delay = <0x22>; - rx_delay = <0x0e>; - - phy-handle = <&rgmii_phy0>; - status = "okay"; -}; - -&mdio0 { - rgmii_phy0: phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - }; -}; - -&gmac1 { - phy-mode = "rgmii"; - clock_in_out = "output"; - - snps,reset-gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 20ms, 100ms for rtl8211f */ - snps,reset-delays-us = <0 20000 100000>; - - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; - - pinctrl-names = "default"; - pinctrl-0 = <&gmac1m1_miim - &gmac1m1_tx_bus2 - &gmac1m1_rx_bus2 - &gmac1m1_rgmii_clk - &gmac1m1_rgmii_bus>; - - tx_delay = <0x21>; - rx_delay = <0x0e>; - - phy-handle = <&rgmii_phy1>; - status = "okay"; -}; - -&mdio1 { - rgmii_phy1: phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - }; -}; - -&gic { - mbi-ranges = <94 31>, <229 31>, <289 31>; -}; - -&pcie30phy { - status = "okay"; -}; - -&pcie3x2 { - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_m2_pcie>; - status = "okay"; -}; - -&pcie2x1 { - reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; - disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_mini_pcie>; - status = "okay"; -}; - -&pmu_io_domains { - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_1v8>; - vccio7-supply = <&vcc_3v3>; - status = "okay"; -}; - -&pwm8 { - status = "okay"; -}; - -&pwm9 { - status = "disabled"; -}; - -&pwm10 { - status = "disabled"; -}; - -&pwm14 { - status = "disabled"; -}; - -&spi3 { - pinctrl-0 = <&spi3m1_pins>; - status = "disabled"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3m1_xfer>; - status = "disabled"; -}; - -&saradc { - vref-supply = <&vcca_1v8>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&sdhci { - assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>; - assigned-clock-rates = <200000000>, <24000000>, <200000000>; - bus-width = <8>; - max-frequency = <200000000>; - mmc-hs200-1_8v; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; - supports-emmc; - status = "okay"; -}; - -&sdmmc0 { - max-frequency = <150000000>; - no-sdio; - no-mmc; - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - disable-wp; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v3_sd>; - vqmmc-supply = <&vccio_sd>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - status = "okay"; -}; - -/* USB OTG/USB Host_1 USB 2.0 Comb */ -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_host { - phy-supply = <&vcc5v0_usb30_host>; - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vcc5v0_otg_vbus>; - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -/* USB Host_2/USB Host_3 USB 2.0 Comb */ -&usb2phy1 { - status = "okay"; -}; - -&usb2phy1_host { - status = "okay"; -}; - -&usb2phy1_otg { - phy-supply = <&vcc5v0_usb20_host>; - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -/* MULTI_PHY0 For SATA0, USB3.0 OTG Only USB2.0 */ -&usb_host0_xhci { - phys = <&usb2phy0_otg>; - phy-names = "usb2-phy"; - extcon = <&usb2phy0>; - maximum-speed = "high-speed"; - dr_mode = "host"; - status = "okay"; -}; - -&sata0 { - status = "okay"; -}; - -/* USB3.0 Host */ -&usb_host1_xhci { - status = "okay"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi_in_vp0>; - }; -}; - -&pinctrl { - leds { - user_led_pin: user-status-led-pin { - rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_usb30_host_en: vcc5v0-usb30-host-en { - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_otg_vbus_en: vcc5v0-otg-vbus-en { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en { - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en { - rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; diff --git a/arch/arm/dts/rk3568-nanopi-r5c.dts b/arch/arm/dts/rk3568-nanopi-r5c.dts deleted file mode 100644 index c718b8dbb9c6..000000000000 --- a/arch/arm/dts/rk3568-nanopi-r5c.dts +++ /dev/null @@ -1,112 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* - * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. - * (http://www.friendlyelec.com) - * - * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> - */ - -/dts-v1/; -#include "rk3568-nanopi-r5s.dtsi" - -/ { - model = "FriendlyElec NanoPi R5C"; - compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568"; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&reset_button_pin>; - - button-reset { - debounce-interval = <50>; - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; - label = "reset"; - linux,code = <KEY_RESTART>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>; - - led-lan { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; - }; - - power_led: led-power { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_POWER; - linux,default-trigger = "heartbeat"; - gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>; - }; - - led-wan { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WAN; - gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; - }; - - led-wlan { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WLAN; - gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&pcie2x1 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie20_reset_pin>; - reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&pcie3x1 { - num-lanes = <1>; - reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pcie3x2 { - num-lanes = <1>; - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pinctrl { - gpio-leds { - lan_led_pin: lan-led-pin { - rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - power_led_pin: power-led-pin { - rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wan_led_pin: wan-led-pin { - rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wlan_led_pin: wlan-led-pin { - rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie20_reset_pin: pcie20-reset-pin { - rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - rockchip-key { - reset_button_pin: reset-button-pin { - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dts b/arch/arm/dts/rk3568-nanopi-r5s.dts deleted file mode 100644 index b6ad8328c7eb..000000000000 --- a/arch/arm/dts/rk3568-nanopi-r5s.dts +++ /dev/null @@ -1,136 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* - * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. - * (http://www.friendlyelec.com) - * - * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> - */ - -/dts-v1/; -#include "rk3568-nanopi-r5s.dtsi" - -/ { - model = "FriendlyElec NanoPi R5S"; - compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568"; - - aliases { - ethernet0 = &gmac0; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>; - - led-lan1 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; - }; - - led-lan2 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>; - }; - - power_led: led-power { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_POWER; - linux,default-trigger = "heartbeat"; - gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; - }; - - led-wan { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WAN; - gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gmac0 { - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; - assigned-clock-rates = <0>, <125000000>; - clock_in_out = "output"; - phy-handle = <&rgmii_phy0>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac0_miim - &gmac0_tx_bus2 - &gmac0_rx_bus2 - &gmac0_rgmii_clk - &gmac0_rgmii_bus>; - snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 15ms, 50ms for rtl8211f */ - snps,reset-delays-us = <0 15000 50000>; - tx_delay = <0x3c>; - rx_delay = <0x2f>; - status = "okay"; -}; - -&mdio0 { - rgmii_phy0: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - pinctrl-0 = <ð_phy0_reset_pin>; - pinctrl-names = "default"; - }; -}; - -&pcie2x1 { - num-lanes = <1>; - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&pcie30phy { - data-lanes = <1 2>; - status = "okay"; -}; - -&pcie3x1 { - num-lanes = <1>; - reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pcie3x2 { - num-lanes = <1>; - num-ib-windows = <8>; - num-ob-windows = <8>; - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pinctrl { - gmac0 { - eth_phy0_reset_pin: eth-phy0-reset-pin { - rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - gpio-leds { - lan1_led_pin: lan1-led-pin { - rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - lan2_led_pin: lan2-led-pin { - rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - power_led_pin: power-led-pin { - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wan_led_pin: wan-led-pin { - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dtsi b/arch/arm/dts/rk3568-nanopi-r5s.dtsi deleted file mode 100644 index 93189f830640..000000000000 --- a/arch/arm/dts/rk3568-nanopi-r5s.dtsi +++ /dev/null @@ -1,587 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* - * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. - * (http://www.friendlyelec.com) - * - * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3568.dtsi" - -/ { - aliases { - mmc0 = &sdmmc0; - mmc1 = &sdhci; - }; - - chosen: chosen { - stdout-path = "serial2:1500000n8"; - }; - - hdmi-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - vdd_usbc: vdd-usbc-regulator { - compatible = "regulator-fixed"; - regulator-name = "vdd_usbc"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc3v3_sys: vcc3v3-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_usbc>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vdd_usbc>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pcie"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; - startup-delay-us = <200000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_usb: vcc5v0-usb-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vdd_usbc>; - }; - - vcc5v0_usb_host: vcc5v0-usb-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb_host_en>; - regulator-name = "vcc5v0_usb_host"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb_otg_en>; - regulator-name = "vcc5v0_usb_otg"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - pcie30_avdd0v9: pcie30-avdd0v9-regulator { - compatible = "regulator-fixed"; - regulator-name = "pcie30_avdd0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - vin-supply = <&vcc3v3_sys>; - }; - - pcie30_avdd1v8: pcie30-avdd1v8-regulator { - compatible = "regulator-fixed"; - regulator-name = "pcie30_avdd1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc3v3_sys>; - }; -}; - -&combphy0 { - status = "okay"; -}; - -&combphy1 { - status = "okay"; -}; - -&combphy2 { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vdda0v9_image>; - avdd-1v8-supply = <&vcca1v8_image>; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; - rockchip,system-power-controller; - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - wakeup-source; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-name = "vdd_npu"; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-name = "vdda0v9_image"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <950000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-name = "vdda_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-name = "vdda0v9_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-name = "vccio_acodec"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-name = "vcc3v3_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-name = "vcca1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-name = "vcca1v8_image"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-name = "vcc3v3_sd"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - - }; -}; - -&i2c5 { - status = "okay"; - - hym8563: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <0>; - clock-output-names = "rtcic_32kout"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - wakeup-source; - }; -}; - -&i2s0_8ch { - status = "okay"; -}; - -&pcie30phy { - data-lanes = <1 2>; - status = "okay"; -}; - -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb { - vcc5v0_usb_host_en: vcc5v0-usb-host-en { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_usb_otg_en: vcc5v0-usb-otg-en { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_1v8>; - vccio7-supply = <&vcc_3v3>; - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca_1v8>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - max-frequency = <200000000>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; - status = "okay"; -}; - -&sdmmc0 { - max-frequency = <150000000>; - no-sdio; - no-mmc; - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - disable-wp; - vmmc-supply = <&vcc3v3_sd>; - vqmmc-supply = <&vccio_sd>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host0_xhci { - extcon = <&usb2phy0>; - dr_mode = "host"; - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb_host1_xhci { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_host { - phy-supply = <&vcc5v0_usb_host>; - status = "okay"; -}; - -&usb2phy0_otg { - status = "okay"; -}; - -&usb2phy1 { - status = "okay"; -}; - -&usb2phy1_host { - phy-supply = <&vcc5v0_usb_otg>; - status = "okay"; -}; - -&usb2phy1_otg { - status = "okay"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi_in_vp0>; - }; -}; diff --git a/arch/arm/dts/rk3568-odroid-m1.dts b/arch/arm/dts/rk3568-odroid-m1.dts deleted file mode 100644 index a337f547caf5..000000000000 --- a/arch/arm/dts/rk3568-odroid-m1.dts +++ /dev/null @@ -1,741 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2022 Hardkernel Co., Ltd. - * - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3568.dtsi" - -/ { - model = "Hardkernel ODROID-M1"; - compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568"; - - aliases { - ethernet0 = &gmac0; - i2c0 = &i2c3; - i2c3 = &i2c0; - mmc0 = &sdhci; - mmc1 = &sdmmc0; - serial0 = &uart1; - serial1 = &uart0; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - dc_12v: dc-12v-regulator { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - hdmi-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_receiver_pin>; - }; - - leds { - compatible = "gpio-leds"; - - led_power: led-0 { - gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_RED>; - default-state = "keep"; - linux,default-trigger = "default-on"; - pinctrl-names = "default"; - pinctrl-0 = <&led_power_pin>; - }; - led_work: led-1 { - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_HEARTBEAT; - color = <LED_COLOR_ID_BLUE>; - linux,default-trigger = "heartbeat"; - pinctrl-names = "default"; - pinctrl-0 = <&led_work_pin>; - }; - }; - - rk809-sound { - compatible = "simple-audio-card"; - pinctrl-names = "default"; - pinctrl-0 = <&hp_det_pin>; - simple-audio-card,name = "Analog RK817"; - simple-audio-card,format = "i2s"; - simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,widgets = - "Headphone", "Headphones", - "Speaker", "Speaker"; - simple-audio-card,routing = - "Headphones", "HPOL", - "Headphones", "HPOR", - "Speaker", "SPKO"; - - simple-audio-card,cpu { - sound-dai = <&i2s1_8ch>; - }; - - simple-audio-card,codec { - sound-dai = <&rk809>; - }; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pcie"; - enable-active-high; - gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc3v3_pcie_en_pin>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <5000>; - vin-supply = <&vcc3v3_sys>; - }; - - vcc3v3_sys: vcc3v3-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_usb_host: vcc5v0-usb-host-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb_host"; - enable-active-high; - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb_host_en_pin>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb_otg"; - enable-active-high; - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb_otg_en_pin>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&combphy0 { - /* Used for USB3 */ - phy-supply = <&vcc5v0_usb_host>; - status = "okay"; -}; - -&combphy1 { - /* Used for USB3 */ - phy-supply = <&vcc5v0_usb_otg>; - status = "okay"; -}; - -&combphy2 { - /* used for SATA */ - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&gmac0 { - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; - assigned-clock-rates = <0>, <125000000>; - clock_in_out = "output"; - phy-handle = <&rgmii_phy0>; - phy-mode = "rgmii"; - phy-supply = <&vcc3v3_sys>; - pinctrl-names = "default"; - pinctrl-0 = <&gmac0_miim - &gmac0_tx_bus2 - &gmac0_rx_bus2 - &gmac0_rgmii_clk - &gmac0_rgmii_bus>; - status = "okay"; - - tx_delay = <0x4f>; - rx_delay = <0x2d>; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vdda0v9_image>; - avdd-1v8-supply = <&vcca1v8_image>; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; - #clock-cells = <1>; - clock-names = "mclk"; - clocks = <&cru I2S1_MCLKOUT_TX>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; - rockchip,system-power-controller; - #sound-dai-cells = <0>; - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - wakeup-source; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-name = "vdd_npu"; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-name = "vdda0v9_image"; - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-name = "vdda_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-name = "vdda0v9_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-name = "vccio_acodec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-name = "vcc3v3_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-name = "vcca1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-name = "vcca1v8_image"; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-name = "vcc3v3_sd"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&i2s0_8ch { - status = "okay"; -}; - -&i2s1_8ch { - rockchip,trcm-sync-tx-only; - status = "okay"; -}; - -&mdio0 { - rgmii_phy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - reset-assert-us = <20000>; - reset-deassert-us = <100000>; - reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - }; -}; - -&pcie30phy { - status = "okay"; -}; - -&pcie3x2 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_pin>; - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pinctrl { - fspi { - fspi_dual_io_pins: fspi-dual-io-pins { - rockchip,pins = - /* fspi_clk */ - <1 RK_PD0 1 &pcfg_pull_none>, - /* fspi_cs0n */ - <1 RK_PD3 1 &pcfg_pull_none>, - /* fspi_d0 */ - <1 RK_PD1 1 &pcfg_pull_none>, - /* fspi_d1 */ - <1 RK_PD2 1 &pcfg_pull_none>; - }; - }; - - ir-receiver { - ir_receiver_pin: ir-receiver-pin { - /* external pullup to VCC3V3_SYS */ - rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - led_power_pin: led-power-pin { - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - led_work_pin: led-work-pin { - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_reset_pin: pcie-reset-pin { - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin { - rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - rk809 { - hp_det_pin: hp-det-pin { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio2-supply = <&vcc_1v8>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_3v3>; - vccio7-supply = <&vcc_3v3>; - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca_1v8>; - status = "okay"; -}; - -&sata2 { - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - max-frequency = <200000000>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc0 { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - sd-uhs-sdr50; - vmmc-supply = <&vcc3v3_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&sfc { - /* Dual I/O mode as the D2 pin conflicts with the eMMC */ - pinctrl-0 = <&fspi_dual_io_pins>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <100000000>; - spi-rx-bus-width = <2>; - spi-tx-bus-width = <1>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SPL"; - reg = <0x0 0xe0000>; - }; - partition@e0000 { - label = "U-Boot Env"; - reg = <0xe0000 0x20000>; - }; - partition@100000 { - label = "U-Boot"; - reg = <0x100000 0x200000>; - }; - partition@300000 { - label = "splash"; - reg = <0x300000 0x100000>; - }; - partition@400000 { - label = "Filesystem"; - reg = <0x400000 0xc00000>; - }; - }; - }; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host0_xhci { - dr_mode = "host"; - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb_host1_xhci { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_host { - phy-supply = <&vcc5v0_usb_host>; - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vcc5v0_usb_otg>; - status = "okay"; -}; - -&usb2phy1 { - status = "okay"; -}; - -&usb2phy1_host { - phy-supply = <&vcc5v0_usb_host>; - status = "okay"; -}; - -&usb2phy1_otg { - phy-supply = <&vcc5v0_usb_host>; - status = "okay"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi_in_vp0>; - }; -}; diff --git a/arch/arm/dts/rk3568-pinctrl.dtsi b/arch/arm/dts/rk3568-pinctrl.dtsi deleted file mode 100644 index 0a979bfb63d9..000000000000 --- a/arch/arm/dts/rk3568-pinctrl.dtsi +++ /dev/null @@ -1,3214 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. - */ - -#include <dt-bindings/pinctrl/rockchip.h> -#include "rockchip-pinconf.dtsi" - -/* - * This file is auto generated by pin2dts tool, please keep these code - * by adding changes at end of this file. - */ -&pinctrl { - acodec { - /omit-if-no-ref/ - acodec_pins: acodec-pins { - rockchip,pins = - /* acodec_adc_sync */ - <1 RK_PB1 5 &pcfg_pull_none>, - /* acodec_adcclk */ - <1 RK_PA1 5 &pcfg_pull_none>, - /* acodec_adcdata */ - <1 RK_PA0 5 &pcfg_pull_none>, - /* acodec_dac_datal */ - <1 RK_PA7 5 &pcfg_pull_none>, - /* acodec_dac_datar */ - <1 RK_PB0 5 &pcfg_pull_none>, - /* acodec_dacclk */ - <1 RK_PA3 5 &pcfg_pull_none>, - /* acodec_dacsync */ - <1 RK_PA5 5 &pcfg_pull_none>; - }; - }; - - audiopwm { - /omit-if-no-ref/ - audiopwm_lout: audiopwm-lout { - rockchip,pins = - /* audiopwm_lout */ - <1 RK_PA0 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - audiopwm_loutn: audiopwm-loutn { - rockchip,pins = - /* audiopwm_loutn */ - <1 RK_PA1 6 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - audiopwm_loutp: audiopwm-loutp { - rockchip,pins = - /* audiopwm_loutp */ - <1 RK_PA0 6 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - audiopwm_rout: audiopwm-rout { - rockchip,pins = - /* audiopwm_rout */ - <1 RK_PA1 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - audiopwm_routn: audiopwm-routn { - rockchip,pins = - /* audiopwm_routn */ - <1 RK_PA7 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - audiopwm_routp: audiopwm-routp { - rockchip,pins = - /* audiopwm_routp */ - <1 RK_PA6 4 &pcfg_pull_none>; - }; - }; - - bt656 { - /omit-if-no-ref/ - bt656m0_pins: bt656m0-pins { - rockchip,pins = - /* bt656_clkm0 */ - <3 RK_PA0 2 &pcfg_pull_none>, - /* bt656_d0m0 */ - <2 RK_PD0 2 &pcfg_pull_none>, - /* bt656_d1m0 */ - <2 RK_PD1 2 &pcfg_pull_none>, - /* bt656_d2m0 */ - <2 RK_PD2 2 &pcfg_pull_none>, - /* bt656_d3m0 */ - <2 RK_PD3 2 &pcfg_pull_none>, - /* bt656_d4m0 */ - <2 RK_PD4 2 &pcfg_pull_none>, - /* bt656_d5m0 */ - <2 RK_PD5 2 &pcfg_pull_none>, - /* bt656_d6m0 */ - <2 RK_PD6 2 &pcfg_pull_none>, - /* bt656_d7m0 */ - <2 RK_PD7 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - bt656m1_pins: bt656m1-pins { - rockchip,pins = - /* bt656_clkm1 */ - <4 RK_PB4 5 &pcfg_pull_none>, - /* bt656_d0m1 */ - <3 RK_PC6 5 &pcfg_pull_none>, - /* bt656_d1m1 */ - <3 RK_PC7 5 &pcfg_pull_none>, - /* bt656_d2m1 */ - <3 RK_PD0 5 &pcfg_pull_none>, - /* bt656_d3m1 */ - <3 RK_PD1 5 &pcfg_pull_none>, - /* bt656_d4m1 */ - <3 RK_PD2 5 &pcfg_pull_none>, - /* bt656_d5m1 */ - <3 RK_PD3 5 &pcfg_pull_none>, - /* bt656_d6m1 */ - <3 RK_PD4 5 &pcfg_pull_none>, - /* bt656_d7m1 */ - <3 RK_PD5 5 &pcfg_pull_none>; - }; - }; - - bt1120 { - /omit-if-no-ref/ - bt1120_pins: bt1120-pins { - rockchip,pins = - /* bt1120_clk */ - <3 RK_PA6 2 &pcfg_pull_none>, - /* bt1120_d0 */ - <3 RK_PA1 2 &pcfg_pull_none>, - /* bt1120_d1 */ - <3 RK_PA2 2 &pcfg_pull_none>, - /* bt1120_d2 */ - <3 RK_PA3 2 &pcfg_pull_none>, - /* bt1120_d3 */ - <3 RK_PA4 2 &pcfg_pull_none>, - /* bt1120_d4 */ - <3 RK_PA5 2 &pcfg_pull_none>, - /* bt1120_d5 */ - <3 RK_PA7 2 &pcfg_pull_none>, - /* bt1120_d6 */ - <3 RK_PB0 2 &pcfg_pull_none>, - /* bt1120_d7 */ - <3 RK_PB1 2 &pcfg_pull_none>, - /* bt1120_d8 */ - <3 RK_PB2 2 &pcfg_pull_none>, - /* bt1120_d9 */ - <3 RK_PB3 2 &pcfg_pull_none>, - /* bt1120_d10 */ - <3 RK_PB4 2 &pcfg_pull_none>, - /* bt1120_d11 */ - <3 RK_PB5 2 &pcfg_pull_none>, - /* bt1120_d12 */ - <3 RK_PB6 2 &pcfg_pull_none>, - /* bt1120_d13 */ - <3 RK_PC1 2 &pcfg_pull_none>, - /* bt1120_d14 */ - <3 RK_PC2 2 &pcfg_pull_none>, - /* bt1120_d15 */ - <3 RK_PC3 2 &pcfg_pull_none>; - }; - }; - - cam { - /omit-if-no-ref/ - cam_clkout0: cam-clkout0 { - rockchip,pins = - /* cam_clkout0 */ - <4 RK_PA7 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - cam_clkout1: cam-clkout1 { - rockchip,pins = - /* cam_clkout1 */ - <4 RK_PB0 1 &pcfg_pull_none>; - }; - }; - - can0 { - /omit-if-no-ref/ - can0m0_pins: can0m0-pins { - rockchip,pins = - /* can0_rxm0 */ - <0 RK_PB4 2 &pcfg_pull_none>, - /* can0_txm0 */ - <0 RK_PB3 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - can0m1_pins: can0m1-pins { - rockchip,pins = - /* can0_rxm1 */ - <2 RK_PA2 4 &pcfg_pull_none>, - /* can0_txm1 */ - <2 RK_PA1 4 &pcfg_pull_none>; - }; - }; - - can1 { - /omit-if-no-ref/ - can1m0_pins: can1m0-pins { - rockchip,pins = - /* can1_rxm0 */ - <1 RK_PA0 3 &pcfg_pull_none>, - /* can1_txm0 */ - <1 RK_PA1 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - can1m1_pins: can1m1-pins { - rockchip,pins = - /* can1_rxm1 */ - <4 RK_PC2 3 &pcfg_pull_none>, - /* can1_txm1 */ - <4 RK_PC3 3 &pcfg_pull_none>; - }; - }; - - can2 { - /omit-if-no-ref/ - can2m0_pins: can2m0-pins { - rockchip,pins = - /* can2_rxm0 */ - <4 RK_PB4 3 &pcfg_pull_none>, - /* can2_txm0 */ - <4 RK_PB5 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - can2m1_pins: can2m1-pins { - rockchip,pins = - /* can2_rxm1 */ - <2 RK_PB1 4 &pcfg_pull_none>, - /* can2_txm1 */ - <2 RK_PB2 4 &pcfg_pull_none>; - }; - }; - - cif { - /omit-if-no-ref/ - cif_clk: cif-clk { - rockchip,pins = - /* cif_clkout */ - <4 RK_PC0 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - cif_dvp_clk: cif-dvp-clk { - rockchip,pins = - /* cif_clkin */ - <4 RK_PC1 1 &pcfg_pull_none>, - /* cif_href */ - <4 RK_PB6 1 &pcfg_pull_none>, - /* cif_vsync */ - <4 RK_PB7 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - cif_dvp_bus16: cif-dvp-bus16 { - rockchip,pins = - /* cif_d8 */ - <3 RK_PD6 1 &pcfg_pull_none>, - /* cif_d9 */ - <3 RK_PD7 1 &pcfg_pull_none>, - /* cif_d10 */ - <4 RK_PA0 1 &pcfg_pull_none>, - /* cif_d11 */ - <4 RK_PA1 1 &pcfg_pull_none>, - /* cif_d12 */ - <4 RK_PA2 1 &pcfg_pull_none>, - /* cif_d13 */ - <4 RK_PA3 1 &pcfg_pull_none>, - /* cif_d14 */ - <4 RK_PA4 1 &pcfg_pull_none>, - /* cif_d15 */ - <4 RK_PA5 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - cif_dvp_bus8: cif-dvp-bus8 { - rockchip,pins = - /* cif_d0 */ - <3 RK_PC6 1 &pcfg_pull_none>, - /* cif_d1 */ - <3 RK_PC7 1 &pcfg_pull_none>, - /* cif_d2 */ - <3 RK_PD0 1 &pcfg_pull_none>, - /* cif_d3 */ - <3 RK_PD1 1 &pcfg_pull_none>, - /* cif_d4 */ - <3 RK_PD2 1 &pcfg_pull_none>, - /* cif_d5 */ - <3 RK_PD3 1 &pcfg_pull_none>, - /* cif_d6 */ - <3 RK_PD4 1 &pcfg_pull_none>, - /* cif_d7 */ - <3 RK_PD5 1 &pcfg_pull_none>; - }; - }; - - clk32k { - /omit-if-no-ref/ - clk32k_in: clk32k-in { - rockchip,pins = - /* clk32k_in */ - <0 RK_PB0 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - clk32k_out0: clk32k-out0 { - rockchip,pins = - /* clk32k_out0 */ - <0 RK_PB0 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - clk32k_out1: clk32k-out1 { - rockchip,pins = - /* clk32k_out1 */ - <2 RK_PC6 1 &pcfg_pull_none>; - }; - }; - - cpu { - /omit-if-no-ref/ - cpu_pins: cpu-pins { - rockchip,pins = - /* cpu_avs */ - <0 RK_PB7 2 &pcfg_pull_none>; - }; - }; - - ebc { - /omit-if-no-ref/ - ebc_extern: ebc-extern { - rockchip,pins = - /* ebc_sdce1 */ - <4 RK_PA7 2 &pcfg_pull_none>, - /* ebc_sdce2 */ - <4 RK_PB0 2 &pcfg_pull_none>, - /* ebc_sdce3 */ - <4 RK_PB1 2 &pcfg_pull_none>, - /* ebc_sdshr */ - <4 RK_PB5 2 &pcfg_pull_none>, - /* ebc_vcom */ - <4 RK_PB2 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - ebc_pins: ebc-pins { - rockchip,pins = - /* ebc_gdclk */ - <4 RK_PC0 2 &pcfg_pull_none>, - /* ebc_gdoe */ - <4 RK_PB3 2 &pcfg_pull_none>, - /* ebc_gdsp */ - <4 RK_PB4 2 &pcfg_pull_none>, - /* ebc_sdce0 */ - <4 RK_PA6 2 &pcfg_pull_none>, - /* ebc_sdclk */ - <4 RK_PC1 2 &pcfg_pull_none>, - /* ebc_sddo0 */ - <3 RK_PC6 2 &pcfg_pull_none>, - /* ebc_sddo1 */ - <3 RK_PC7 2 &pcfg_pull_none>, - /* ebc_sddo2 */ - <3 RK_PD0 2 &pcfg_pull_none>, - /* ebc_sddo3 */ - <3 RK_PD1 2 &pcfg_pull_none>, - /* ebc_sddo4 */ - <3 RK_PD2 2 &pcfg_pull_none>, - /* ebc_sddo5 */ - <3 RK_PD3 2 &pcfg_pull_none>, - /* ebc_sddo6 */ - <3 RK_PD4 2 &pcfg_pull_none>, - /* ebc_sddo7 */ - <3 RK_PD5 2 &pcfg_pull_none>, - /* ebc_sddo8 */ - <3 RK_PD6 2 &pcfg_pull_none>, - /* ebc_sddo9 */ - <3 RK_PD7 2 &pcfg_pull_none>, - /* ebc_sddo10 */ - <4 RK_PA0 2 &pcfg_pull_none>, - /* ebc_sddo11 */ - <4 RK_PA1 2 &pcfg_pull_none>, - /* ebc_sddo12 */ - <4 RK_PA2 2 &pcfg_pull_none>, - /* ebc_sddo13 */ - <4 RK_PA3 2 &pcfg_pull_none>, - /* ebc_sddo14 */ - <4 RK_PA4 2 &pcfg_pull_none>, - /* ebc_sddo15 */ - <4 RK_PA5 2 &pcfg_pull_none>, - /* ebc_sdle */ - <4 RK_PB6 2 &pcfg_pull_none>, - /* ebc_sdoe */ - <4 RK_PB7 2 &pcfg_pull_none>; - }; - }; - - edpdp { - /omit-if-no-ref/ - edpdpm0_pins: edpdpm0-pins { - rockchip,pins = - /* edpdp_hpdinm0 */ - <4 RK_PC4 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - edpdpm1_pins: edpdpm1-pins { - rockchip,pins = - /* edpdp_hpdinm1 */ - <0 RK_PC2 2 &pcfg_pull_none>; - }; - }; - - emmc { - /omit-if-no-ref/ - emmc_rstnout: emmc-rstnout { - rockchip,pins = - /* emmc_rstn */ - <1 RK_PC7 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - emmc_bus8: emmc-bus8 { - rockchip,pins = - /* emmc_d0 */ - <1 RK_PB4 1 &pcfg_pull_up_drv_level_2>, - /* emmc_d1 */ - <1 RK_PB5 1 &pcfg_pull_up_drv_level_2>, - /* emmc_d2 */ - <1 RK_PB6 1 &pcfg_pull_up_drv_level_2>, - /* emmc_d3 */ - <1 RK_PB7 1 &pcfg_pull_up_drv_level_2>, - /* emmc_d4 */ - <1 RK_PC0 1 &pcfg_pull_up_drv_level_2>, - /* emmc_d5 */ - <1 RK_PC1 1 &pcfg_pull_up_drv_level_2>, - /* emmc_d6 */ - <1 RK_PC2 1 &pcfg_pull_up_drv_level_2>, - /* emmc_d7 */ - <1 RK_PC3 1 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - emmc_clk: emmc-clk { - rockchip,pins = - /* emmc_clkout */ - <1 RK_PC5 1 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - emmc_cmd: emmc-cmd { - rockchip,pins = - /* emmc_cmd */ - <1 RK_PC4 1 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - emmc_datastrobe: emmc-datastrobe { - rockchip,pins = - /* emmc_datastrobe */ - <1 RK_PC6 1 &pcfg_pull_none>; - }; - }; - - eth0 { - /omit-if-no-ref/ - eth0_pins: eth0-pins { - rockchip,pins = - /* eth0_refclko25m */ - <2 RK_PC1 2 &pcfg_pull_none>; - }; - }; - - eth1 { - /omit-if-no-ref/ - eth1m0_pins: eth1m0-pins { - rockchip,pins = - /* eth1_refclko25mm0 */ - <3 RK_PB0 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - eth1m1_pins: eth1m1-pins { - rockchip,pins = - /* eth1_refclko25mm1 */ - <4 RK_PB3 3 &pcfg_pull_none>; - }; - }; - - flash { - /omit-if-no-ref/ - flash_pins: flash-pins { - rockchip,pins = - /* flash_ale */ - <1 RK_PD0 2 &pcfg_pull_none>, - /* flash_cle */ - <1 RK_PC6 3 &pcfg_pull_none>, - /* flash_cs0n */ - <1 RK_PD3 2 &pcfg_pull_none>, - /* flash_cs1n */ - <1 RK_PD4 2 &pcfg_pull_none>, - /* flash_d0 */ - <1 RK_PB4 2 &pcfg_pull_none>, - /* flash_d1 */ - <1 RK_PB5 2 &pcfg_pull_none>, - /* flash_d2 */ - <1 RK_PB6 2 &pcfg_pull_none>, - /* flash_d3 */ - <1 RK_PB7 2 &pcfg_pull_none>, - /* flash_d4 */ - <1 RK_PC0 2 &pcfg_pull_none>, - /* flash_d5 */ - <1 RK_PC1 2 &pcfg_pull_none>, - /* flash_d6 */ - <1 RK_PC2 2 &pcfg_pull_none>, - /* flash_d7 */ - <1 RK_PC3 2 &pcfg_pull_none>, - /* flash_dqs */ - <1 RK_PC5 2 &pcfg_pull_none>, - /* flash_rdn */ - <1 RK_PD2 2 &pcfg_pull_none>, - /* flash_rdy */ - <1 RK_PD1 2 &pcfg_pull_none>, - /* flash_volsel */ - <0 RK_PA7 1 &pcfg_pull_none>, - /* flash_wpn */ - <1 RK_PC7 3 &pcfg_pull_none>, - /* flash_wrn */ - <1 RK_PC4 2 &pcfg_pull_none>; - }; - }; - - fspi { - /omit-if-no-ref/ - fspi_pins: fspi-pins { - rockchip,pins = - /* fspi_clk */ - <1 RK_PD0 1 &pcfg_pull_none>, - /* fspi_cs0n */ - <1 RK_PD3 1 &pcfg_pull_none>, - /* fspi_d0 */ - <1 RK_PD1 1 &pcfg_pull_none>, - /* fspi_d1 */ - <1 RK_PD2 1 &pcfg_pull_none>, - /* fspi_d2 */ - <1 RK_PC7 2 &pcfg_pull_none>, - /* fspi_d3 */ - <1 RK_PD4 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - fspi_cs1: fspi-cs1 { - rockchip,pins = - /* fspi_cs1n */ - <1 RK_PC6 2 &pcfg_pull_up>; - }; - }; - - gmac0 { - /omit-if-no-ref/ - gmac0_miim: gmac0-miim { - rockchip,pins = - /* gmac0_mdc */ - <2 RK_PC3 2 &pcfg_pull_none>, - /* gmac0_mdio */ - <2 RK_PC4 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac0_clkinout: gmac0-clkinout { - rockchip,pins = - /* gmac0_mclkinout */ - <2 RK_PC2 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac0_rx_er: gmac0-rx-er { - rockchip,pins = - /* gmac0_rxer */ - <2 RK_PC5 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac0_rx_bus2: gmac0-rx-bus2 { - rockchip,pins = - /* gmac0_rxd0 */ - <2 RK_PB6 1 &pcfg_pull_none>, - /* gmac0_rxd1 */ - <2 RK_PB7 2 &pcfg_pull_none>, - /* gmac0_rxdvcrs */ - <2 RK_PC0 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac0_tx_bus2: gmac0-tx-bus2 { - rockchip,pins = - /* gmac0_txd0 */ - <2 RK_PB3 1 &pcfg_pull_none_drv_level_2>, - /* gmac0_txd1 */ - <2 RK_PB4 1 &pcfg_pull_none_drv_level_2>, - /* gmac0_txen */ - <2 RK_PB5 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac0_rgmii_clk: gmac0-rgmii-clk { - rockchip,pins = - /* gmac0_rxclk */ - <2 RK_PA5 2 &pcfg_pull_none>, - /* gmac0_txclk */ - <2 RK_PB0 2 &pcfg_pull_none_drv_level_1>; - }; - - /omit-if-no-ref/ - gmac0_rgmii_bus: gmac0-rgmii-bus { - rockchip,pins = - /* gmac0_rxd2 */ - <2 RK_PA3 2 &pcfg_pull_none>, - /* gmac0_rxd3 */ - <2 RK_PA4 2 &pcfg_pull_none>, - /* gmac0_txd2 */ - <2 RK_PA6 2 &pcfg_pull_none_drv_level_2>, - /* gmac0_txd3 */ - <2 RK_PA7 2 &pcfg_pull_none_drv_level_2>; - }; - }; - - gmac1 { - /omit-if-no-ref/ - gmac1m0_miim: gmac1m0-miim { - rockchip,pins = - /* gmac1_mdcm0 */ - <3 RK_PC4 3 &pcfg_pull_none>, - /* gmac1_mdiom0 */ - <3 RK_PC5 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac1m0_clkinout: gmac1m0-clkinout { - rockchip,pins = - /* gmac1_mclkinoutm0 */ - <3 RK_PC0 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac1m0_rx_er: gmac1m0-rx-er { - rockchip,pins = - /* gmac1_rxerm0 */ - <3 RK_PB4 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac1m0_rx_bus2: gmac1m0-rx-bus2 { - rockchip,pins = - /* gmac1_rxd0m0 */ - <3 RK_PB1 3 &pcfg_pull_none>, - /* gmac1_rxd1m0 */ - <3 RK_PB2 3 &pcfg_pull_none>, - /* gmac1_rxdvcrsm0 */ - <3 RK_PB3 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac1m0_tx_bus2: gmac1m0-tx-bus2 { - rockchip,pins = - /* gmac1_txd0m0 */ - <3 RK_PB5 3 &pcfg_pull_none_drv_level_2>, - /* gmac1_txd1m0 */ - <3 RK_PB6 3 &pcfg_pull_none_drv_level_2>, - /* gmac1_txenm0 */ - <3 RK_PB7 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac1m0_rgmii_clk: gmac1m0-rgmii-clk { - rockchip,pins = - /* gmac1_rxclkm0 */ - <3 RK_PA7 3 &pcfg_pull_none>, - /* gmac1_txclkm0 */ - <3 RK_PA6 3 &pcfg_pull_none_drv_level_1>; - }; - - /omit-if-no-ref/ - gmac1m0_rgmii_bus: gmac1m0-rgmii-bus { - rockchip,pins = - /* gmac1_rxd2m0 */ - <3 RK_PA4 3 &pcfg_pull_none>, - /* gmac1_rxd3m0 */ - <3 RK_PA5 3 &pcfg_pull_none>, - /* gmac1_txd2m0 */ - <3 RK_PA2 3 &pcfg_pull_none_drv_level_2>, - /* gmac1_txd3m0 */ - <3 RK_PA3 3 &pcfg_pull_none_drv_level_2>; - }; - - /omit-if-no-ref/ - gmac1m1_miim: gmac1m1-miim { - rockchip,pins = - /* gmac1_mdcm1 */ - <4 RK_PB6 3 &pcfg_pull_none>, - /* gmac1_mdiom1 */ - <4 RK_PB7 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac1m1_clkinout: gmac1m1-clkinout { - rockchip,pins = - /* gmac1_mclkinoutm1 */ - <4 RK_PC1 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac1m1_rx_er: gmac1m1-rx-er { - rockchip,pins = - /* gmac1_rxerm1 */ - <4 RK_PB2 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac1m1_rx_bus2: gmac1m1-rx-bus2 { - rockchip,pins = - /* gmac1_rxd0m1 */ - <4 RK_PA7 3 &pcfg_pull_none>, - /* gmac1_rxd1m1 */ - <4 RK_PB0 3 &pcfg_pull_none>, - /* gmac1_rxdvcrsm1 */ - <4 RK_PB1 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac1m1_tx_bus2: gmac1m1-tx-bus2 { - rockchip,pins = - /* gmac1_txd0m1 */ - <4 RK_PA4 3 &pcfg_pull_none_drv_level_2>, - /* gmac1_txd1m1 */ - <4 RK_PA5 3 &pcfg_pull_none_drv_level_2>, - /* gmac1_txenm1 */ - <4 RK_PA6 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac1m1_rgmii_clk: gmac1m1-rgmii-clk { - rockchip,pins = - /* gmac1_rxclkm1 */ - <4 RK_PA3 3 &pcfg_pull_none>, - /* gmac1_txclkm1 */ - <4 RK_PA0 3 &pcfg_pull_none_drv_level_1>; - }; - - /omit-if-no-ref/ - gmac1m1_rgmii_bus: gmac1m1-rgmii-bus { - rockchip,pins = - /* gmac1_rxd2m1 */ - <4 RK_PA1 3 &pcfg_pull_none>, - /* gmac1_rxd3m1 */ - <4 RK_PA2 3 &pcfg_pull_none>, - /* gmac1_txd2m1 */ - <3 RK_PD6 3 &pcfg_pull_none_drv_level_2>, - /* gmac1_txd3m1 */ - <3 RK_PD7 3 &pcfg_pull_none_drv_level_2>; - }; - }; - - gpu { - /omit-if-no-ref/ - gpu_pins: gpu-pins { - rockchip,pins = - /* gpu_avs */ - <0 RK_PC0 2 &pcfg_pull_none>, - /* gpu_pwren */ - <0 RK_PA6 4 &pcfg_pull_none>; - }; - }; - - hdmitx { - /omit-if-no-ref/ - hdmitxm0_cec: hdmitxm0-cec { - rockchip,pins = - /* hdmitxm0_cec */ - <4 RK_PD1 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - hdmitxm1_cec: hdmitxm1-cec { - rockchip,pins = - /* hdmitxm1_cec */ - <0 RK_PC7 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - hdmitx_scl: hdmitx-scl { - rockchip,pins = - /* hdmitx_scl */ - <4 RK_PC7 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - hdmitx_sda: hdmitx-sda { - rockchip,pins = - /* hdmitx_sda */ - <4 RK_PD0 1 &pcfg_pull_none>; - }; - }; - - i2c0 { - /omit-if-no-ref/ - i2c0_xfer: i2c0-xfer { - rockchip,pins = - /* i2c0_scl */ - <0 RK_PB1 1 &pcfg_pull_none_smt>, - /* i2c0_sda */ - <0 RK_PB2 1 &pcfg_pull_none_smt>; - }; - }; - - i2c1 { - /omit-if-no-ref/ - i2c1_xfer: i2c1-xfer { - rockchip,pins = - /* i2c1_scl */ - <0 RK_PB3 1 &pcfg_pull_none_smt>, - /* i2c1_sda */ - <0 RK_PB4 1 &pcfg_pull_none_smt>; - }; - }; - - i2c2 { - /omit-if-no-ref/ - i2c2m0_xfer: i2c2m0-xfer { - rockchip,pins = - /* i2c2_sclm0 */ - <0 RK_PB5 1 &pcfg_pull_none_smt>, - /* i2c2_sdam0 */ - <0 RK_PB6 1 &pcfg_pull_none_smt>; - }; - - /omit-if-no-ref/ - i2c2m1_xfer: i2c2m1-xfer { - rockchip,pins = - /* i2c2_sclm1 */ - <4 RK_PB5 1 &pcfg_pull_none_smt>, - /* i2c2_sdam1 */ - <4 RK_PB4 1 &pcfg_pull_none_smt>; - }; - }; - - i2c3 { - /omit-if-no-ref/ - i2c3m0_xfer: i2c3m0-xfer { - rockchip,pins = - /* i2c3_sclm0 */ - <1 RK_PA1 1 &pcfg_pull_none_smt>, - /* i2c3_sdam0 */ - <1 RK_PA0 1 &pcfg_pull_none_smt>; - }; - - /omit-if-no-ref/ - i2c3m1_xfer: i2c3m1-xfer { - rockchip,pins = - /* i2c3_sclm1 */ - <3 RK_PB5 4 &pcfg_pull_none_smt>, - /* i2c3_sdam1 */ - <3 RK_PB6 4 &pcfg_pull_none_smt>; - }; - }; - - i2c4 { - /omit-if-no-ref/ - i2c4m0_xfer: i2c4m0-xfer { - rockchip,pins = - /* i2c4_sclm0 */ - <4 RK_PB3 1 &pcfg_pull_none_smt>, - /* i2c4_sdam0 */ - <4 RK_PB2 1 &pcfg_pull_none_smt>; - }; - - /omit-if-no-ref/ - i2c4m1_xfer: i2c4m1-xfer { - rockchip,pins = - /* i2c4_sclm1 */ - <2 RK_PB2 2 &pcfg_pull_none_smt>, - /* i2c4_sdam1 */ - <2 RK_PB1 2 &pcfg_pull_none_smt>; - }; - }; - - i2c5 { - /omit-if-no-ref/ - i2c5m0_xfer: i2c5m0-xfer { - rockchip,pins = - /* i2c5_sclm0 */ - <3 RK_PB3 4 &pcfg_pull_none_smt>, - /* i2c5_sdam0 */ - <3 RK_PB4 4 &pcfg_pull_none_smt>; - }; - - /omit-if-no-ref/ - i2c5m1_xfer: i2c5m1-xfer { - rockchip,pins = - /* i2c5_sclm1 */ - <4 RK_PC7 2 &pcfg_pull_none_smt>, - /* i2c5_sdam1 */ - <4 RK_PD0 2 &pcfg_pull_none_smt>; - }; - }; - - i2s1 { - /omit-if-no-ref/ - i2s1m0_lrckrx: i2s1m0-lrckrx { - rockchip,pins = - /* i2s1m0_lrckrx */ - <1 RK_PA6 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m0_lrcktx: i2s1m0-lrcktx { - rockchip,pins = - /* i2s1m0_lrcktx */ - <1 RK_PA5 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m0_mclk: i2s1m0-mclk { - rockchip,pins = - /* i2s1m0_mclk */ - <1 RK_PA2 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m0_sclkrx: i2s1m0-sclkrx { - rockchip,pins = - /* i2s1m0_sclkrx */ - <1 RK_PA4 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m0_sclktx: i2s1m0-sclktx { - rockchip,pins = - /* i2s1m0_sclktx */ - <1 RK_PA3 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m0_sdi0: i2s1m0-sdi0 { - rockchip,pins = - /* i2s1m0_sdi0 */ - <1 RK_PB3 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m0_sdi1: i2s1m0-sdi1 { - rockchip,pins = - /* i2s1m0_sdi1 */ - <1 RK_PB2 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m0_sdi2: i2s1m0-sdi2 { - rockchip,pins = - /* i2s1m0_sdi2 */ - <1 RK_PB1 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m0_sdi3: i2s1m0-sdi3 { - rockchip,pins = - /* i2s1m0_sdi3 */ - <1 RK_PB0 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m0_sdo0: i2s1m0-sdo0 { - rockchip,pins = - /* i2s1m0_sdo0 */ - <1 RK_PA7 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m0_sdo1: i2s1m0-sdo1 { - rockchip,pins = - /* i2s1m0_sdo1 */ - <1 RK_PB0 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m0_sdo2: i2s1m0-sdo2 { - rockchip,pins = - /* i2s1m0_sdo2 */ - <1 RK_PB1 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m0_sdo3: i2s1m0-sdo3 { - rockchip,pins = - /* i2s1m0_sdo3 */ - <1 RK_PB2 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_lrckrx: i2s1m1-lrckrx { - rockchip,pins = - /* i2s1m1_lrckrx */ - <4 RK_PA7 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_lrcktx: i2s1m1-lrcktx { - rockchip,pins = - /* i2s1m1_lrcktx */ - <3 RK_PD0 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_mclk: i2s1m1-mclk { - rockchip,pins = - /* i2s1m1_mclk */ - <3 RK_PC6 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_sclkrx: i2s1m1-sclkrx { - rockchip,pins = - /* i2s1m1_sclkrx */ - <4 RK_PA6 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_sclktx: i2s1m1-sclktx { - rockchip,pins = - /* i2s1m1_sclktx */ - <3 RK_PC7 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_sdi0: i2s1m1-sdi0 { - rockchip,pins = - /* i2s1m1_sdi0 */ - <3 RK_PD2 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_sdi1: i2s1m1-sdi1 { - rockchip,pins = - /* i2s1m1_sdi1 */ - <3 RK_PD3 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_sdi2: i2s1m1-sdi2 { - rockchip,pins = - /* i2s1m1_sdi2 */ - <3 RK_PD4 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_sdi3: i2s1m1-sdi3 { - rockchip,pins = - /* i2s1m1_sdi3 */ - <3 RK_PD5 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_sdo0: i2s1m1-sdo0 { - rockchip,pins = - /* i2s1m1_sdo0 */ - <3 RK_PD1 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_sdo1: i2s1m1-sdo1 { - rockchip,pins = - /* i2s1m1_sdo1 */ - <4 RK_PB0 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_sdo2: i2s1m1-sdo2 { - rockchip,pins = - /* i2s1m1_sdo2 */ - <4 RK_PB1 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m1_sdo3: i2s1m1-sdo3 { - rockchip,pins = - /* i2s1m1_sdo3 */ - <4 RK_PB5 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_lrckrx: i2s1m2-lrckrx { - rockchip,pins = - /* i2s1m2_lrckrx */ - <3 RK_PC5 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_lrcktx: i2s1m2-lrcktx { - rockchip,pins = - /* i2s1m2_lrcktx */ - <2 RK_PD2 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_mclk: i2s1m2-mclk { - rockchip,pins = - /* i2s1m2_mclk */ - <2 RK_PD0 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_sclkrx: i2s1m2-sclkrx { - rockchip,pins = - /* i2s1m2_sclkrx */ - <3 RK_PC3 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_sclktx: i2s1m2-sclktx { - rockchip,pins = - /* i2s1m2_sclktx */ - <2 RK_PD1 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_sdi0: i2s1m2-sdi0 { - rockchip,pins = - /* i2s1m2_sdi0 */ - <2 RK_PD3 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_sdi1: i2s1m2-sdi1 { - rockchip,pins = - /* i2s1m2_sdi1 */ - <2 RK_PD4 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_sdi2: i2s1m2-sdi2 { - rockchip,pins = - /* i2s1m2_sdi2 */ - <2 RK_PD5 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_sdi3: i2s1m2-sdi3 { - rockchip,pins = - /* i2s1m2_sdi3 */ - <2 RK_PD6 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_sdo0: i2s1m2-sdo0 { - rockchip,pins = - /* i2s1m2_sdo0 */ - <2 RK_PD7 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_sdo1: i2s1m2-sdo1 { - rockchip,pins = - /* i2s1m2_sdo1 */ - <3 RK_PA0 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_sdo2: i2s1m2-sdo2 { - rockchip,pins = - /* i2s1m2_sdo2 */ - <3 RK_PC1 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s1m2_sdo3: i2s1m2-sdo3 { - rockchip,pins = - /* i2s1m2_sdo3 */ - <3 RK_PC2 5 &pcfg_pull_none>; - }; - }; - - i2s2 { - /omit-if-no-ref/ - i2s2m0_lrckrx: i2s2m0-lrckrx { - rockchip,pins = - /* i2s2m0_lrckrx */ - <2 RK_PC0 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m0_lrcktx: i2s2m0-lrcktx { - rockchip,pins = - /* i2s2m0_lrcktx */ - <2 RK_PC3 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m0_mclk: i2s2m0-mclk { - rockchip,pins = - /* i2s2m0_mclk */ - <2 RK_PC1 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m0_sclkrx: i2s2m0-sclkrx { - rockchip,pins = - /* i2s2m0_sclkrx */ - <2 RK_PB7 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m0_sclktx: i2s2m0-sclktx { - rockchip,pins = - /* i2s2m0_sclktx */ - <2 RK_PC2 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m0_sdi: i2s2m0-sdi { - rockchip,pins = - /* i2s2m0_sdi */ - <2 RK_PC5 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m0_sdo: i2s2m0-sdo { - rockchip,pins = - /* i2s2m0_sdo */ - <2 RK_PC4 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m1_lrckrx: i2s2m1-lrckrx { - rockchip,pins = - /* i2s2m1_lrckrx */ - <4 RK_PA5 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m1_lrcktx: i2s2m1-lrcktx { - rockchip,pins = - /* i2s2m1_lrcktx */ - <4 RK_PA4 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m1_mclk: i2s2m1-mclk { - rockchip,pins = - /* i2s2m1_mclk */ - <4 RK_PB6 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m1_sclkrx: i2s2m1-sclkrx { - rockchip,pins = - /* i2s2m1_sclkrx */ - <4 RK_PC1 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m1_sclktx: i2s2m1-sclktx { - rockchip,pins = - /* i2s2m1_sclktx */ - <4 RK_PB7 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m1_sdi: i2s2m1-sdi { - rockchip,pins = - /* i2s2m1_sdi */ - <4 RK_PB2 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s2m1_sdo: i2s2m1-sdo { - rockchip,pins = - /* i2s2m1_sdo */ - <4 RK_PB3 5 &pcfg_pull_none>; - }; - }; - - i2s3 { - /omit-if-no-ref/ - i2s3m0_lrck: i2s3m0-lrck { - rockchip,pins = - /* i2s3m0_lrck */ - <3 RK_PA4 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s3m0_mclk: i2s3m0-mclk { - rockchip,pins = - /* i2s3m0_mclk */ - <3 RK_PA2 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s3m0_sclk: i2s3m0-sclk { - rockchip,pins = - /* i2s3m0_sclk */ - <3 RK_PA3 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s3m0_sdi: i2s3m0-sdi { - rockchip,pins = - /* i2s3m0_sdi */ - <3 RK_PA6 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s3m0_sdo: i2s3m0-sdo { - rockchip,pins = - /* i2s3m0_sdo */ - <3 RK_PA5 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s3m1_lrck: i2s3m1-lrck { - rockchip,pins = - /* i2s3m1_lrck */ - <4 RK_PC4 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s3m1_mclk: i2s3m1-mclk { - rockchip,pins = - /* i2s3m1_mclk */ - <4 RK_PC2 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s3m1_sclk: i2s3m1-sclk { - rockchip,pins = - /* i2s3m1_sclk */ - <4 RK_PC3 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s3m1_sdi: i2s3m1-sdi { - rockchip,pins = - /* i2s3m1_sdi */ - <4 RK_PC6 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - i2s3m1_sdo: i2s3m1-sdo { - rockchip,pins = - /* i2s3m1_sdo */ - <4 RK_PC5 5 &pcfg_pull_none>; - }; - }; - - isp { - /omit-if-no-ref/ - isp_pins: isp-pins { - rockchip,pins = - /* isp_flashtrigin */ - <4 RK_PB4 4 &pcfg_pull_none>, - /* isp_flashtrigout */ - <4 RK_PA6 1 &pcfg_pull_none>, - /* isp_prelighttrig */ - <4 RK_PB1 1 &pcfg_pull_none>; - }; - }; - - jtag { - /omit-if-no-ref/ - jtag_pins: jtag-pins { - rockchip,pins = - /* jtag_tck */ - <1 RK_PD7 2 &pcfg_pull_none>, - /* jtag_tms */ - <2 RK_PA0 2 &pcfg_pull_none>; - }; - }; - - lcdc { - /omit-if-no-ref/ - lcdc_ctl: lcdc-ctl { - rockchip,pins = - /* lcdc_clk */ - <3 RK_PA0 1 &pcfg_pull_none>, - /* lcdc_d0 */ - <2 RK_PD0 1 &pcfg_pull_none>, - /* lcdc_d1 */ - <2 RK_PD1 1 &pcfg_pull_none>, - /* lcdc_d2 */ - <2 RK_PD2 1 &pcfg_pull_none>, - /* lcdc_d3 */ - <2 RK_PD3 1 &pcfg_pull_none>, - /* lcdc_d4 */ - <2 RK_PD4 1 &pcfg_pull_none>, - /* lcdc_d5 */ - <2 RK_PD5 1 &pcfg_pull_none>, - /* lcdc_d6 */ - <2 RK_PD6 1 &pcfg_pull_none>, - /* lcdc_d7 */ - <2 RK_PD7 1 &pcfg_pull_none>, - /* lcdc_d8 */ - <3 RK_PA1 1 &pcfg_pull_none>, - /* lcdc_d9 */ - <3 RK_PA2 1 &pcfg_pull_none>, - /* lcdc_d10 */ - <3 RK_PA3 1 &pcfg_pull_none>, - /* lcdc_d11 */ - <3 RK_PA4 1 &pcfg_pull_none>, - /* lcdc_d12 */ - <3 RK_PA5 1 &pcfg_pull_none>, - /* lcdc_d13 */ - <3 RK_PA6 1 &pcfg_pull_none>, - /* lcdc_d14 */ - <3 RK_PA7 1 &pcfg_pull_none>, - /* lcdc_d15 */ - <3 RK_PB0 1 &pcfg_pull_none>, - /* lcdc_d16 */ - <3 RK_PB1 1 &pcfg_pull_none>, - /* lcdc_d17 */ - <3 RK_PB2 1 &pcfg_pull_none>, - /* lcdc_d18 */ - <3 RK_PB3 1 &pcfg_pull_none>, - /* lcdc_d19 */ - <3 RK_PB4 1 &pcfg_pull_none>, - /* lcdc_d20 */ - <3 RK_PB5 1 &pcfg_pull_none>, - /* lcdc_d21 */ - <3 RK_PB6 1 &pcfg_pull_none>, - /* lcdc_d22 */ - <3 RK_PB7 1 &pcfg_pull_none>, - /* lcdc_d23 */ - <3 RK_PC0 1 &pcfg_pull_none>, - /* lcdc_den */ - <3 RK_PC3 1 &pcfg_pull_none>, - /* lcdc_hsync */ - <3 RK_PC1 1 &pcfg_pull_none>, - /* lcdc_vsync */ - <3 RK_PC2 1 &pcfg_pull_none>; - }; - }; - - mcu { - /omit-if-no-ref/ - mcu_pins: mcu-pins { - rockchip,pins = - /* mcu_jtagtck */ - <0 RK_PB4 4 &pcfg_pull_none>, - /* mcu_jtagtdi */ - <0 RK_PC1 4 &pcfg_pull_none>, - /* mcu_jtagtdo */ - <0 RK_PB3 4 &pcfg_pull_none>, - /* mcu_jtagtms */ - <0 RK_PC2 4 &pcfg_pull_none>, - /* mcu_jtagtrstn */ - <0 RK_PC3 4 &pcfg_pull_none>; - }; - }; - - npu { - /omit-if-no-ref/ - npu_pins: npu-pins { - rockchip,pins = - /* npu_avs */ - <0 RK_PC1 2 &pcfg_pull_none>; - }; - }; - - pcie20 { - /omit-if-no-ref/ - pcie20m0_pins: pcie20m0-pins { - rockchip,pins = - /* pcie20_clkreqnm0 */ - <0 RK_PA5 3 &pcfg_pull_none>, - /* pcie20_perstnm0 */ - <0 RK_PB6 3 &pcfg_pull_none>, - /* pcie20_wakenm0 */ - <0 RK_PB5 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pcie20m1_pins: pcie20m1-pins { - rockchip,pins = - /* pcie20_clkreqnm1 */ - <2 RK_PD0 4 &pcfg_pull_none>, - /* pcie20_perstnm1 */ - <3 RK_PC1 4 &pcfg_pull_none>, - /* pcie20_wakenm1 */ - <2 RK_PD1 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pcie20m2_pins: pcie20m2-pins { - rockchip,pins = - /* pcie20_clkreqnm2 */ - <1 RK_PB0 4 &pcfg_pull_none>, - /* pcie20_perstnm2 */ - <1 RK_PB2 4 &pcfg_pull_none>, - /* pcie20_wakenm2 */ - <1 RK_PB1 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pcie20_buttonrstn: pcie20-buttonrstn { - rockchip,pins = - /* pcie20_buttonrstn */ - <0 RK_PB4 3 &pcfg_pull_none>; - }; - }; - - pcie30x1 { - /omit-if-no-ref/ - pcie30x1m0_pins: pcie30x1m0-pins { - rockchip,pins = - /* pcie30x1_clkreqnm0 */ - <0 RK_PA4 3 &pcfg_pull_none>, - /* pcie30x1_perstnm0 */ - <0 RK_PC3 3 &pcfg_pull_none>, - /* pcie30x1_wakenm0 */ - <0 RK_PC2 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pcie30x1m1_pins: pcie30x1m1-pins { - rockchip,pins = - /* pcie30x1_clkreqnm1 */ - <2 RK_PD2 4 &pcfg_pull_none>, - /* pcie30x1_perstnm1 */ - <3 RK_PA1 4 &pcfg_pull_none>, - /* pcie30x1_wakenm1 */ - <2 RK_PD3 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pcie30x1m2_pins: pcie30x1m2-pins { - rockchip,pins = - /* pcie30x1_clkreqnm2 */ - <1 RK_PA5 4 &pcfg_pull_none>, - /* pcie30x1_perstnm2 */ - <1 RK_PA2 4 &pcfg_pull_none>, - /* pcie30x1_wakenm2 */ - <1 RK_PA3 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pcie30x1_buttonrstn: pcie30x1-buttonrstn { - rockchip,pins = - /* pcie30x1_buttonrstn */ - <0 RK_PB3 3 &pcfg_pull_none>; - }; - }; - - pcie30x2 { - /omit-if-no-ref/ - pcie30x2m0_pins: pcie30x2m0-pins { - rockchip,pins = - /* pcie30x2_clkreqnm0 */ - <0 RK_PA6 2 &pcfg_pull_none>, - /* pcie30x2_perstnm0 */ - <0 RK_PC6 3 &pcfg_pull_none>, - /* pcie30x2_wakenm0 */ - <0 RK_PC5 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pcie30x2m1_pins: pcie30x2m1-pins { - rockchip,pins = - /* pcie30x2_clkreqnm1 */ - <2 RK_PD4 4 &pcfg_pull_none>, - /* pcie30x2_perstnm1 */ - <2 RK_PD6 4 &pcfg_pull_none>, - /* pcie30x2_wakenm1 */ - <2 RK_PD5 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pcie30x2m2_pins: pcie30x2m2-pins { - rockchip,pins = - /* pcie30x2_clkreqnm2 */ - <4 RK_PC2 4 &pcfg_pull_none>, - /* pcie30x2_perstnm2 */ - <4 RK_PC4 4 &pcfg_pull_none>, - /* pcie30x2_wakenm2 */ - <4 RK_PC3 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pcie30x2_buttonrstn: pcie30x2-buttonrstn { - rockchip,pins = - /* pcie30x2_buttonrstn */ - <0 RK_PB0 3 &pcfg_pull_none>; - }; - }; - - pdm { - /omit-if-no-ref/ - pdmm0_clk: pdmm0-clk { - rockchip,pins = - /* pdm_clk0m0 */ - <1 RK_PA6 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm0_clk1: pdmm0-clk1 { - rockchip,pins = - /* pdmm0_clk1 */ - <1 RK_PA4 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm0_sdi0: pdmm0-sdi0 { - rockchip,pins = - /* pdmm0_sdi0 */ - <1 RK_PB3 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm0_sdi1: pdmm0-sdi1 { - rockchip,pins = - /* pdmm0_sdi1 */ - <1 RK_PB2 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm0_sdi2: pdmm0-sdi2 { - rockchip,pins = - /* pdmm0_sdi2 */ - <1 RK_PB1 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm0_sdi3: pdmm0-sdi3 { - rockchip,pins = - /* pdmm0_sdi3 */ - <1 RK_PB0 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm1_clk: pdmm1-clk { - rockchip,pins = - /* pdm_clk0m1 */ - <3 RK_PD6 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm1_clk1: pdmm1-clk1 { - rockchip,pins = - /* pdmm1_clk1 */ - <4 RK_PA0 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm1_sdi0: pdmm1-sdi0 { - rockchip,pins = - /* pdmm1_sdi0 */ - <3 RK_PD7 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm1_sdi1: pdmm1-sdi1 { - rockchip,pins = - /* pdmm1_sdi1 */ - <4 RK_PA1 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm1_sdi2: pdmm1-sdi2 { - rockchip,pins = - /* pdmm1_sdi2 */ - <4 RK_PA2 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm1_sdi3: pdmm1-sdi3 { - rockchip,pins = - /* pdmm1_sdi3 */ - <4 RK_PA3 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm2_clk1: pdmm2-clk1 { - rockchip,pins = - /* pdmm2_clk1 */ - <3 RK_PC4 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm2_sdi0: pdmm2-sdi0 { - rockchip,pins = - /* pdmm2_sdi0 */ - <3 RK_PB3 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm2_sdi1: pdmm2-sdi1 { - rockchip,pins = - /* pdmm2_sdi1 */ - <3 RK_PB4 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm2_sdi2: pdmm2-sdi2 { - rockchip,pins = - /* pdmm2_sdi2 */ - <3 RK_PB7 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pdmm2_sdi3: pdmm2-sdi3 { - rockchip,pins = - /* pdmm2_sdi3 */ - <3 RK_PC0 5 &pcfg_pull_none>; - }; - }; - - pmic { - /omit-if-no-ref/ - pmic_pins: pmic-pins { - rockchip,pins = - /* pmic_sleep */ - <0 RK_PA2 1 &pcfg_pull_none>; - }; - }; - - pmu { - /omit-if-no-ref/ - pmu_pins: pmu-pins { - rockchip,pins = - /* pmu_debug0 */ - <0 RK_PA5 4 &pcfg_pull_none>, - /* pmu_debug1 */ - <0 RK_PA6 3 &pcfg_pull_none>, - /* pmu_debug2 */ - <0 RK_PC4 4 &pcfg_pull_none>, - /* pmu_debug3 */ - <0 RK_PC5 4 &pcfg_pull_none>, - /* pmu_debug4 */ - <0 RK_PC6 4 &pcfg_pull_none>, - /* pmu_debug5 */ - <0 RK_PC7 4 &pcfg_pull_none>; - }; - }; - - pwm0 { - /omit-if-no-ref/ - pwm0m0_pins: pwm0m0-pins { - rockchip,pins = - /* pwm0_m0 */ - <0 RK_PB7 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pwm0m1_pins: pwm0m1-pins { - rockchip,pins = - /* pwm0_m1 */ - <0 RK_PC7 2 &pcfg_pull_none>; - }; - }; - - pwm1 { - /omit-if-no-ref/ - pwm1m0_pins: pwm1m0-pins { - rockchip,pins = - /* pwm1_m0 */ - <0 RK_PC0 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pwm1m1_pins: pwm1m1-pins { - rockchip,pins = - /* pwm1_m1 */ - <0 RK_PB5 4 &pcfg_pull_none>; - }; - }; - - pwm2 { - /omit-if-no-ref/ - pwm2m0_pins: pwm2m0-pins { - rockchip,pins = - /* pwm2_m0 */ - <0 RK_PC1 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pwm2m1_pins: pwm2m1-pins { - rockchip,pins = - /* pwm2_m1 */ - <0 RK_PB6 4 &pcfg_pull_none>; - }; - }; - - pwm3 { - /omit-if-no-ref/ - pwm3_pins: pwm3-pins { - rockchip,pins = - /* pwm3_ir */ - <0 RK_PC2 1 &pcfg_pull_none>; - }; - }; - - pwm4 { - /omit-if-no-ref/ - pwm4_pins: pwm4-pins { - rockchip,pins = - /* pwm4 */ - <0 RK_PC3 1 &pcfg_pull_none>; - }; - }; - - pwm5 { - /omit-if-no-ref/ - pwm5_pins: pwm5-pins { - rockchip,pins = - /* pwm5 */ - <0 RK_PC4 1 &pcfg_pull_none>; - }; - }; - - pwm6 { - /omit-if-no-ref/ - pwm6_pins: pwm6-pins { - rockchip,pins = - /* pwm6 */ - <0 RK_PC5 1 &pcfg_pull_none>; - }; - }; - - pwm7 { - /omit-if-no-ref/ - pwm7_pins: pwm7-pins { - rockchip,pins = - /* pwm7_ir */ - <0 RK_PC6 1 &pcfg_pull_none>; - }; - }; - - pwm8 { - /omit-if-no-ref/ - pwm8m0_pins: pwm8m0-pins { - rockchip,pins = - /* pwm8_m0 */ - <3 RK_PB1 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pwm8m1_pins: pwm8m1-pins { - rockchip,pins = - /* pwm8_m1 */ - <1 RK_PD5 4 &pcfg_pull_none>; - }; - }; - - pwm9 { - /omit-if-no-ref/ - pwm9m0_pins: pwm9m0-pins { - rockchip,pins = - /* pwm9_m0 */ - <3 RK_PB2 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pwm9m1_pins: pwm9m1-pins { - rockchip,pins = - /* pwm9_m1 */ - <1 RK_PD6 4 &pcfg_pull_none>; - }; - }; - - pwm10 { - /omit-if-no-ref/ - pwm10m0_pins: pwm10m0-pins { - rockchip,pins = - /* pwm10_m0 */ - <3 RK_PB5 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pwm10m1_pins: pwm10m1-pins { - rockchip,pins = - /* pwm10_m1 */ - <2 RK_PA1 2 &pcfg_pull_none>; - }; - }; - - pwm11 { - /omit-if-no-ref/ - pwm11m0_pins: pwm11m0-pins { - rockchip,pins = - /* pwm11_irm0 */ - <3 RK_PB6 5 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pwm11m1_pins: pwm11m1-pins { - rockchip,pins = - /* pwm11_irm1 */ - <4 RK_PC0 3 &pcfg_pull_none>; - }; - }; - - pwm12 { - /omit-if-no-ref/ - pwm12m0_pins: pwm12m0-pins { - rockchip,pins = - /* pwm12_m0 */ - <3 RK_PB7 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pwm12m1_pins: pwm12m1-pins { - rockchip,pins = - /* pwm12_m1 */ - <4 RK_PC5 1 &pcfg_pull_none>; - }; - }; - - pwm13 { - /omit-if-no-ref/ - pwm13m0_pins: pwm13m0-pins { - rockchip,pins = - /* pwm13_m0 */ - <3 RK_PC0 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pwm13m1_pins: pwm13m1-pins { - rockchip,pins = - /* pwm13_m1 */ - <4 RK_PC6 1 &pcfg_pull_none>; - }; - }; - - pwm14 { - /omit-if-no-ref/ - pwm14m0_pins: pwm14m0-pins { - rockchip,pins = - /* pwm14_m0 */ - <3 RK_PC4 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pwm14m1_pins: pwm14m1-pins { - rockchip,pins = - /* pwm14_m1 */ - <4 RK_PC2 1 &pcfg_pull_none>; - }; - }; - - pwm15 { - /omit-if-no-ref/ - pwm15m0_pins: pwm15m0-pins { - rockchip,pins = - /* pwm15_irm0 */ - <3 RK_PC5 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - pwm15m1_pins: pwm15m1-pins { - rockchip,pins = - /* pwm15_irm1 */ - <4 RK_PC3 1 &pcfg_pull_none>; - }; - }; - - refclk { - /omit-if-no-ref/ - refclk_pins: refclk-pins { - rockchip,pins = - /* refclk_ou */ - <0 RK_PA0 1 &pcfg_pull_none>; - }; - }; - - sata { - /omit-if-no-ref/ - sata_pins: sata-pins { - rockchip,pins = - /* sata_cpdet */ - <0 RK_PA4 2 &pcfg_pull_none>, - /* sata_cppod */ - <0 RK_PA6 1 &pcfg_pull_none>, - /* sata_mpswitch */ - <0 RK_PA5 2 &pcfg_pull_none>; - }; - }; - - sata0 { - /omit-if-no-ref/ - sata0_pins: sata0-pins { - rockchip,pins = - /* sata0_actled */ - <4 RK_PC6 3 &pcfg_pull_none>; - }; - }; - - sata1 { - /omit-if-no-ref/ - sata1_pins: sata1-pins { - rockchip,pins = - /* sata1_actled */ - <4 RK_PC5 3 &pcfg_pull_none>; - }; - }; - - sata2 { - /omit-if-no-ref/ - sata2_pins: sata2-pins { - rockchip,pins = - /* sata2_actled */ - <4 RK_PC4 3 &pcfg_pull_none>; - }; - }; - - scr { - /omit-if-no-ref/ - scr_pins: scr-pins { - rockchip,pins = - /* scr_clk */ - <1 RK_PA2 3 &pcfg_pull_none>, - /* scr_det */ - <1 RK_PA7 3 &pcfg_pull_up>, - /* scr_io */ - <1 RK_PA3 3 &pcfg_pull_up>, - /* scr_rst */ - <1 RK_PA5 3 &pcfg_pull_none>; - }; - }; - - sdmmc0 { - /omit-if-no-ref/ - sdmmc0_bus4: sdmmc0-bus4 { - rockchip,pins = - /* sdmmc0_d0 */ - <1 RK_PD5 1 &pcfg_pull_up_drv_level_2>, - /* sdmmc0_d1 */ - <1 RK_PD6 1 &pcfg_pull_up_drv_level_2>, - /* sdmmc0_d2 */ - <1 RK_PD7 1 &pcfg_pull_up_drv_level_2>, - /* sdmmc0_d3 */ - <2 RK_PA0 1 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - sdmmc0_clk: sdmmc0-clk { - rockchip,pins = - /* sdmmc0_clk */ - <2 RK_PA2 1 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - sdmmc0_cmd: sdmmc0-cmd { - rockchip,pins = - /* sdmmc0_cmd */ - <2 RK_PA1 1 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - sdmmc0_det: sdmmc0-det { - rockchip,pins = - /* sdmmc0_det */ - <0 RK_PA4 1 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - sdmmc0_pwren: sdmmc0-pwren { - rockchip,pins = - /* sdmmc0_pwren */ - <0 RK_PA5 1 &pcfg_pull_none>; - }; - }; - - sdmmc1 { - /omit-if-no-ref/ - sdmmc1_bus4: sdmmc1-bus4 { - rockchip,pins = - /* sdmmc1_d0 */ - <2 RK_PA3 1 &pcfg_pull_up_drv_level_2>, - /* sdmmc1_d1 */ - <2 RK_PA4 1 &pcfg_pull_up_drv_level_2>, - /* sdmmc1_d2 */ - <2 RK_PA5 1 &pcfg_pull_up_drv_level_2>, - /* sdmmc1_d3 */ - <2 RK_PA6 1 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - sdmmc1_clk: sdmmc1-clk { - rockchip,pins = - /* sdmmc1_clk */ - <2 RK_PB0 1 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - sdmmc1_cmd: sdmmc1-cmd { - rockchip,pins = - /* sdmmc1_cmd */ - <2 RK_PA7 1 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - sdmmc1_det: sdmmc1-det { - rockchip,pins = - /* sdmmc1_det */ - <2 RK_PB2 1 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - sdmmc1_pwren: sdmmc1-pwren { - rockchip,pins = - /* sdmmc1_pwren */ - <2 RK_PB1 1 &pcfg_pull_none>; - }; - }; - - sdmmc2 { - /omit-if-no-ref/ - sdmmc2m0_bus4: sdmmc2m0-bus4 { - rockchip,pins = - /* sdmmc2_d0m0 */ - <3 RK_PC6 3 &pcfg_pull_up_drv_level_2>, - /* sdmmc2_d1m0 */ - <3 RK_PC7 3 &pcfg_pull_up_drv_level_2>, - /* sdmmc2_d2m0 */ - <3 RK_PD0 3 &pcfg_pull_up_drv_level_2>, - /* sdmmc2_d3m0 */ - <3 RK_PD1 3 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - sdmmc2m0_clk: sdmmc2m0-clk { - rockchip,pins = - /* sdmmc2_clkm0 */ - <3 RK_PD3 3 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - sdmmc2m0_cmd: sdmmc2m0-cmd { - rockchip,pins = - /* sdmmc2_cmdm0 */ - <3 RK_PD2 3 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - sdmmc2m0_det: sdmmc2m0-det { - rockchip,pins = - /* sdmmc2_detm0 */ - <3 RK_PD4 3 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - sdmmc2m0_pwren: sdmmc2m0-pwren { - rockchip,pins = - /* sdmmc2m0_pwren */ - <3 RK_PD5 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - sdmmc2m1_bus4: sdmmc2m1-bus4 { - rockchip,pins = - /* sdmmc2_d0m1 */ - <3 RK_PA1 5 &pcfg_pull_up_drv_level_2>, - /* sdmmc2_d1m1 */ - <3 RK_PA2 5 &pcfg_pull_up_drv_level_2>, - /* sdmmc2_d2m1 */ - <3 RK_PA3 5 &pcfg_pull_up_drv_level_2>, - /* sdmmc2_d3m1 */ - <3 RK_PA4 5 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - sdmmc2m1_clk: sdmmc2m1-clk { - rockchip,pins = - /* sdmmc2_clkm1 */ - <3 RK_PA6 5 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - sdmmc2m1_cmd: sdmmc2m1-cmd { - rockchip,pins = - /* sdmmc2_cmdm1 */ - <3 RK_PA5 5 &pcfg_pull_up_drv_level_2>; - }; - - /omit-if-no-ref/ - sdmmc2m1_det: sdmmc2m1-det { - rockchip,pins = - /* sdmmc2_detm1 */ - <3 RK_PA7 4 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - sdmmc2m1_pwren: sdmmc2m1-pwren { - rockchip,pins = - /* sdmmc2m1_pwren */ - <3 RK_PB0 4 &pcfg_pull_none>; - }; - }; - - spdif { - /omit-if-no-ref/ - spdifm0_tx: spdifm0-tx { - rockchip,pins = - /* spdifm0_tx */ - <1 RK_PA4 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spdifm1_tx: spdifm1-tx { - rockchip,pins = - /* spdifm1_tx */ - <3 RK_PC5 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spdifm2_tx: spdifm2-tx { - rockchip,pins = - /* spdifm2_tx */ - <4 RK_PC4 2 &pcfg_pull_none>; - }; - }; - - spi0 { - /omit-if-no-ref/ - spi0m0_pins: spi0m0-pins { - rockchip,pins = - /* spi0_clkm0 */ - <0 RK_PB5 2 &pcfg_pull_none>, - /* spi0_misom0 */ - <0 RK_PC5 2 &pcfg_pull_none>, - /* spi0_mosim0 */ - <0 RK_PB6 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi0m0_cs0: spi0m0-cs0 { - rockchip,pins = - /* spi0_cs0m0 */ - <0 RK_PC6 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi0m0_cs1: spi0m0-cs1 { - rockchip,pins = - /* spi0_cs1m0 */ - <0 RK_PC4 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi0m1_pins: spi0m1-pins { - rockchip,pins = - /* spi0_clkm1 */ - <2 RK_PD3 3 &pcfg_pull_none>, - /* spi0_misom1 */ - <2 RK_PD0 3 &pcfg_pull_none>, - /* spi0_mosim1 */ - <2 RK_PD1 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi0m1_cs0: spi0m1-cs0 { - rockchip,pins = - /* spi0_cs0m1 */ - <2 RK_PD2 3 &pcfg_pull_none>; - }; - }; - - spi1 { - /omit-if-no-ref/ - spi1m0_pins: spi1m0-pins { - rockchip,pins = - /* spi1_clkm0 */ - <2 RK_PB5 3 &pcfg_pull_none>, - /* spi1_misom0 */ - <2 RK_PB6 3 &pcfg_pull_none>, - /* spi1_mosim0 */ - <2 RK_PB7 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi1m0_cs0: spi1m0-cs0 { - rockchip,pins = - /* spi1_cs0m0 */ - <2 RK_PC0 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi1m0_cs1: spi1m0-cs1 { - rockchip,pins = - /* spi1_cs1m0 */ - <2 RK_PC6 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi1m1_pins: spi1m1-pins { - rockchip,pins = - /* spi1_clkm1 */ - <3 RK_PC3 3 &pcfg_pull_none>, - /* spi1_misom1 */ - <3 RK_PC2 3 &pcfg_pull_none>, - /* spi1_mosim1 */ - <3 RK_PC1 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi1m1_cs0: spi1m1-cs0 { - rockchip,pins = - /* spi1_cs0m1 */ - <3 RK_PA1 3 &pcfg_pull_none>; - }; - }; - - spi2 { - /omit-if-no-ref/ - spi2m0_pins: spi2m0-pins { - rockchip,pins = - /* spi2_clkm0 */ - <2 RK_PC1 4 &pcfg_pull_none>, - /* spi2_misom0 */ - <2 RK_PC2 4 &pcfg_pull_none>, - /* spi2_mosim0 */ - <2 RK_PC3 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi2m0_cs0: spi2m0-cs0 { - rockchip,pins = - /* spi2_cs0m0 */ - <2 RK_PC4 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi2m0_cs1: spi2m0-cs1 { - rockchip,pins = - /* spi2_cs1m0 */ - <2 RK_PC5 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi2m1_pins: spi2m1-pins { - rockchip,pins = - /* spi2_clkm1 */ - <3 RK_PA0 3 &pcfg_pull_none>, - /* spi2_misom1 */ - <2 RK_PD7 3 &pcfg_pull_none>, - /* spi2_mosim1 */ - <2 RK_PD6 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi2m1_cs0: spi2m1-cs0 { - rockchip,pins = - /* spi2_cs0m1 */ - <2 RK_PD5 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi2m1_cs1: spi2m1-cs1 { - rockchip,pins = - /* spi2_cs1m1 */ - <2 RK_PD4 3 &pcfg_pull_none>; - }; - }; - - spi3 { - /omit-if-no-ref/ - spi3m0_pins: spi3m0-pins { - rockchip,pins = - /* spi3_clkm0 */ - <4 RK_PB3 4 &pcfg_pull_none>, - /* spi3_misom0 */ - <4 RK_PB0 4 &pcfg_pull_none>, - /* spi3_mosim0 */ - <4 RK_PB2 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi3m0_cs0: spi3m0-cs0 { - rockchip,pins = - /* spi3_cs0m0 */ - <4 RK_PA6 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi3m0_cs1: spi3m0-cs1 { - rockchip,pins = - /* spi3_cs1m0 */ - <4 RK_PA7 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi3m1_pins: spi3m1-pins { - rockchip,pins = - /* spi3_clkm1 */ - <4 RK_PC2 2 &pcfg_pull_none>, - /* spi3_misom1 */ - <4 RK_PC5 2 &pcfg_pull_none>, - /* spi3_mosim1 */ - <4 RK_PC3 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi3m1_cs0: spi3m1-cs0 { - rockchip,pins = - /* spi3_cs0m1 */ - <4 RK_PC6 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - spi3m1_cs1: spi3m1-cs1 { - rockchip,pins = - /* spi3_cs1m1 */ - <4 RK_PD1 2 &pcfg_pull_none>; - }; - }; - - tsadc { - /omit-if-no-ref/ - tsadcm0_shut: tsadcm0-shut { - rockchip,pins = - /* tsadcm0_shut */ - <0 RK_PA1 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - tsadcm1_shut: tsadcm1-shut { - rockchip,pins = - /* tsadcm1_shut */ - <0 RK_PA2 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - tsadc_shutorg: tsadc-shutorg { - rockchip,pins = - /* tsadc_shutorg */ - <0 RK_PA1 2 &pcfg_pull_none>; - }; - }; - - uart0 { - /omit-if-no-ref/ - uart0_xfer: uart0-xfer { - rockchip,pins = - /* uart0_rx */ - <0 RK_PC0 3 &pcfg_pull_up>, - /* uart0_tx */ - <0 RK_PC1 3 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart0_ctsn: uart0-ctsn { - rockchip,pins = - /* uart0_ctsn */ - <0 RK_PC7 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart0_rtsn: uart0-rtsn { - rockchip,pins = - /* uart0_rtsn */ - <0 RK_PC4 3 &pcfg_pull_none>; - }; - }; - - uart1 { - /omit-if-no-ref/ - uart1m0_xfer: uart1m0-xfer { - rockchip,pins = - /* uart1_rxm0 */ - <2 RK_PB3 2 &pcfg_pull_up>, - /* uart1_txm0 */ - <2 RK_PB4 2 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart1m0_ctsn: uart1m0-ctsn { - rockchip,pins = - /* uart1m0_ctsn */ - <2 RK_PB6 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart1m0_rtsn: uart1m0-rtsn { - rockchip,pins = - /* uart1m0_rtsn */ - <2 RK_PB5 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart1m1_xfer: uart1m1-xfer { - rockchip,pins = - /* uart1_rxm1 */ - <3 RK_PD7 4 &pcfg_pull_up>, - /* uart1_txm1 */ - <3 RK_PD6 4 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart1m1_ctsn: uart1m1-ctsn { - rockchip,pins = - /* uart1m1_ctsn */ - <4 RK_PC1 4 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart1m1_rtsn: uart1m1-rtsn { - rockchip,pins = - /* uart1m1_rtsn */ - <4 RK_PB6 4 &pcfg_pull_none>; - }; - }; - - uart2 { - /omit-if-no-ref/ - uart2m0_xfer: uart2m0-xfer { - rockchip,pins = - /* uart2_rxm0 */ - <0 RK_PD0 1 &pcfg_pull_up>, - /* uart2_txm0 */ - <0 RK_PD1 1 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart2m1_xfer: uart2m1-xfer { - rockchip,pins = - /* uart2_rxm1 */ - <1 RK_PD6 2 &pcfg_pull_up>, - /* uart2_txm1 */ - <1 RK_PD5 2 &pcfg_pull_up>; - }; - }; - - uart3 { - /omit-if-no-ref/ - uart3m0_xfer: uart3m0-xfer { - rockchip,pins = - /* uart3_rxm0 */ - <1 RK_PA0 2 &pcfg_pull_up>, - /* uart3_txm0 */ - <1 RK_PA1 2 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart3m0_ctsn: uart3m0-ctsn { - rockchip,pins = - /* uart3m0_ctsn */ - <1 RK_PA3 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart3m0_rtsn: uart3m0-rtsn { - rockchip,pins = - /* uart3m0_rtsn */ - <1 RK_PA2 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart3m1_xfer: uart3m1-xfer { - rockchip,pins = - /* uart3_rxm1 */ - <3 RK_PC0 4 &pcfg_pull_up>, - /* uart3_txm1 */ - <3 RK_PB7 4 &pcfg_pull_up>; - }; - }; - - uart4 { - /omit-if-no-ref/ - uart4m0_xfer: uart4m0-xfer { - rockchip,pins = - /* uart4_rxm0 */ - <1 RK_PA4 2 &pcfg_pull_up>, - /* uart4_txm0 */ - <1 RK_PA6 2 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart4m0_ctsn: uart4m0-ctsn { - rockchip,pins = - /* uart4m0_ctsn */ - <1 RK_PA7 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart4m0_rtsn: uart4m0-rtsn { - rockchip,pins = - /* uart4m0_rtsn */ - <1 RK_PA5 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart4m1_xfer: uart4m1-xfer { - rockchip,pins = - /* uart4_rxm1 */ - <3 RK_PB1 4 &pcfg_pull_up>, - /* uart4_txm1 */ - <3 RK_PB2 4 &pcfg_pull_up>; - }; - }; - - uart5 { - /omit-if-no-ref/ - uart5m0_xfer: uart5m0-xfer { - rockchip,pins = - /* uart5_rxm0 */ - <2 RK_PA1 3 &pcfg_pull_up>, - /* uart5_txm0 */ - <2 RK_PA2 3 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart5m0_ctsn: uart5m0-ctsn { - rockchip,pins = - /* uart5m0_ctsn */ - <1 RK_PD7 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart5m0_rtsn: uart5m0-rtsn { - rockchip,pins = - /* uart5m0_rtsn */ - <2 RK_PA0 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart5m1_xfer: uart5m1-xfer { - rockchip,pins = - /* uart5_rxm1 */ - <3 RK_PC3 4 &pcfg_pull_up>, - /* uart5_txm1 */ - <3 RK_PC2 4 &pcfg_pull_up>; - }; - }; - - uart6 { - /omit-if-no-ref/ - uart6m0_xfer: uart6m0-xfer { - rockchip,pins = - /* uart6_rxm0 */ - <2 RK_PA3 3 &pcfg_pull_up>, - /* uart6_txm0 */ - <2 RK_PA4 3 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart6m0_ctsn: uart6m0-ctsn { - rockchip,pins = - /* uart6m0_ctsn */ - <2 RK_PC0 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart6m0_rtsn: uart6m0-rtsn { - rockchip,pins = - /* uart6m0_rtsn */ - <2 RK_PB7 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart6m1_xfer: uart6m1-xfer { - rockchip,pins = - /* uart6_rxm1 */ - <1 RK_PD6 3 &pcfg_pull_up>, - /* uart6_txm1 */ - <1 RK_PD5 3 &pcfg_pull_up>; - }; - }; - - uart7 { - /omit-if-no-ref/ - uart7m0_xfer: uart7m0-xfer { - rockchip,pins = - /* uart7_rxm0 */ - <2 RK_PA5 3 &pcfg_pull_up>, - /* uart7_txm0 */ - <2 RK_PA6 3 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart7m0_ctsn: uart7m0-ctsn { - rockchip,pins = - /* uart7m0_ctsn */ - <2 RK_PC2 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart7m0_rtsn: uart7m0-rtsn { - rockchip,pins = - /* uart7m0_rtsn */ - <2 RK_PC1 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart7m1_xfer: uart7m1-xfer { - rockchip,pins = - /* uart7_rxm1 */ - <3 RK_PC5 4 &pcfg_pull_up>, - /* uart7_txm1 */ - <3 RK_PC4 4 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart7m2_xfer: uart7m2-xfer { - rockchip,pins = - /* uart7_rxm2 */ - <4 RK_PA3 4 &pcfg_pull_up>, - /* uart7_txm2 */ - <4 RK_PA2 4 &pcfg_pull_up>; - }; - }; - - uart8 { - /omit-if-no-ref/ - uart8m0_xfer: uart8m0-xfer { - rockchip,pins = - /* uart8_rxm0 */ - <2 RK_PC6 2 &pcfg_pull_up>, - /* uart8_txm0 */ - <2 RK_PC5 3 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart8m0_ctsn: uart8m0-ctsn { - rockchip,pins = - /* uart8m0_ctsn */ - <2 RK_PB2 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart8m0_rtsn: uart8m0-rtsn { - rockchip,pins = - /* uart8m0_rtsn */ - <2 RK_PB1 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart8m1_xfer: uart8m1-xfer { - rockchip,pins = - /* uart8_rxm1 */ - <3 RK_PA0 4 &pcfg_pull_up>, - /* uart8_txm1 */ - <2 RK_PD7 4 &pcfg_pull_up>; - }; - }; - - uart9 { - /omit-if-no-ref/ - uart9m0_xfer: uart9m0-xfer { - rockchip,pins = - /* uart9_rxm0 */ - <2 RK_PA7 3 &pcfg_pull_up>, - /* uart9_txm0 */ - <2 RK_PB0 3 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart9m0_ctsn: uart9m0-ctsn { - rockchip,pins = - /* uart9m0_ctsn */ - <2 RK_PC4 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart9m0_rtsn: uart9m0-rtsn { - rockchip,pins = - /* uart9m0_rtsn */ - <2 RK_PC3 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - uart9m1_xfer: uart9m1-xfer { - rockchip,pins = - /* uart9_rxm1 */ - <4 RK_PC6 4 &pcfg_pull_up>, - /* uart9_txm1 */ - <4 RK_PC5 4 &pcfg_pull_up>; - }; - - /omit-if-no-ref/ - uart9m2_xfer: uart9m2-xfer { - rockchip,pins = - /* uart9_rxm2 */ - <4 RK_PA5 4 &pcfg_pull_up>, - /* uart9_txm2 */ - <4 RK_PA4 4 &pcfg_pull_up>; - }; - }; - - vop { - /omit-if-no-ref/ - vopm0_pins: vopm0-pins { - rockchip,pins = - /* vop_pwmm0 */ - <0 RK_PC3 2 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - vopm1_pins: vopm1-pins { - rockchip,pins = - /* vop_pwmm1 */ - <3 RK_PC4 2 &pcfg_pull_none>; - }; - }; -}; - -/* - * This part is edited handly. - */ -&pinctrl { - spi0-hs { - /omit-if-no-ref/ - spi0m0_pins_hs: spi0m0-pins { - rockchip,pins = - /* spi0_clkm0 */ - <0 RK_PB5 2 &pcfg_pull_up_drv_level_1>, - /* spi0_misom0 */ - <0 RK_PC5 2 &pcfg_pull_up_drv_level_1>, - /* spi0_mosim0 */ - <0 RK_PB6 2 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi0m0_cs0_hs: spi0m0-cs0 { - rockchip,pins = - /* spi0_cs0m0 */ - <0 RK_PC6 2 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi0m0_cs1_hs: spi0m0-cs1 { - rockchip,pins = - /* spi0_cs1m0 */ - <0 RK_PC4 2 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi0m1_pins_hs: spi0m1-pins { - rockchip,pins = - /* spi0_clkm1 */ - <2 RK_PD3 3 &pcfg_pull_up_drv_level_1>, - /* spi0_misom1 */ - <2 RK_PD0 3 &pcfg_pull_up_drv_level_1>, - /* spi0_mosim1 */ - <2 RK_PD1 3 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi0m1_cs0_hs: spi0m1-cs0 { - rockchip,pins = - /* spi0_cs0m1 */ - <2 RK_PD2 3 &pcfg_pull_up_drv_level_1>; - }; - }; - - spi1-hs { - /omit-if-no-ref/ - spi1m0_pins_hs: spi1m0-pins { - rockchip,pins = - /* spi1_clkm0 */ - <2 RK_PB5 3 &pcfg_pull_up_drv_level_1>, - /* spi1_misom0 */ - <2 RK_PB6 3 &pcfg_pull_up_drv_level_1>, - /* spi1_mosim0 */ - <2 RK_PB7 4 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi1m0_cs0_hs: spi1m0-cs0 { - rockchip,pins = - /* spi1_cs0m0 */ - <2 RK_PC0 4 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi1m0_cs1_hs: spi1m0-cs1 { - rockchip,pins = - /* spi1_cs1m0 */ - <2 RK_PC6 3 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi1m1_pins_hs: spi1m1-pins { - rockchip,pins = - /* spi1_clkm1 */ - <3 RK_PC3 3 &pcfg_pull_up_drv_level_1>, - /* spi1_misom1 */ - <3 RK_PC2 3 &pcfg_pull_up_drv_level_1>, - /* spi1_mosim1 */ - <3 RK_PC1 3 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi1m1_cs0_hs: spi1m1-cs0 { - rockchip,pins = - /* spi1_cs0m1 */ - <3 RK_PA1 3 &pcfg_pull_up_drv_level_1>; - }; - }; - - spi2-hs { - /omit-if-no-ref/ - spi2m0_pins_hs: spi2m0-pins { - rockchip,pins = - /* spi2_clkm0 */ - <2 RK_PC1 4 &pcfg_pull_up_drv_level_1>, - /* spi2_misom0 */ - <2 RK_PC2 4 &pcfg_pull_up_drv_level_1>, - /* spi2_mosim0 */ - <2 RK_PC3 4 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi2m0_cs0_hs: spi2m0-cs0 { - rockchip,pins = - /* spi2_cs0m0 */ - <2 RK_PC4 4 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi2m0_cs1_hs: spi2m0-cs1 { - rockchip,pins = - /* spi2_cs1m0 */ - <2 RK_PC5 4 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi2m1_pins_hs: spi2m1-pins { - rockchip,pins = - /* spi2_clkm1 */ - <3 RK_PA0 3 &pcfg_pull_up_drv_level_1>, - /* spi2_misom1 */ - <2 RK_PD7 3 &pcfg_pull_up_drv_level_1>, - /* spi2_mosim1 */ - <2 RK_PD6 3 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi2m1_cs0_hs: spi2m1-cs0 { - rockchip,pins = - /* spi2_cs0m1 */ - <2 RK_PD5 3 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi2m1_cs1_hs: spi2m1-cs1 { - rockchip,pins = - /* spi2_cs1m1 */ - <2 RK_PD4 3 &pcfg_pull_up_drv_level_1>; - }; - }; - - spi3-hs { - /omit-if-no-ref/ - spi3m0_pins_hs: spi3m0-pins { - rockchip,pins = - /* spi3_clkm0 */ - <4 RK_PB3 4 &pcfg_pull_up_drv_level_1>, - /* spi3_misom0 */ - <4 RK_PB0 4 &pcfg_pull_up_drv_level_1>, - /* spi3_mosim0 */ - <4 RK_PB2 4 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi3m0_cs0_hs: spi3m0-cs0 { - rockchip,pins = - /* spi3_cs0m0 */ - <4 RK_PA6 4 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi3m0_cs1_hs: spi3m0-cs1 { - rockchip,pins = - /* spi3_cs1m0 */ - <4 RK_PA7 4 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi3m1_pins_hs: spi3m1-pins { - rockchip,pins = - /* spi3_clkm1 */ - <4 RK_PC2 2 &pcfg_pull_up_drv_level_1>, - /* spi3_misom1 */ - <4 RK_PC5 2 &pcfg_pull_up_drv_level_1>, - /* spi3_mosim1 */ - <4 RK_PC3 2 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi3m1_cs0_hs: spi3m1-cs0 { - rockchip,pins = - /* spi3_cs0m1 */ - <4 RK_PC6 2 &pcfg_pull_up_drv_level_1>; - }; - - /omit-if-no-ref/ - spi3m1_cs1_hs: spi3m1-cs1 { - rockchip,pins = - /* spi3_cs1m1 */ - <4 RK_PD1 2 &pcfg_pull_up_drv_level_1>; - }; - }; - - gmac-txd-level3 { - /omit-if-no-ref/ - gmac0_tx_bus2_level3: gmac0-tx-bus2-level3 { - rockchip,pins = - /* gmac0_txd0 */ - <2 RK_PB3 1 &pcfg_pull_none_drv_level_3>, - /* gmac0_txd1 */ - <2 RK_PB4 1 &pcfg_pull_none_drv_level_3>, - /* gmac0_txen */ - <2 RK_PB5 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac0_rgmii_bus_level3: gmac0-rgmii-bus-level3 { - rockchip,pins = - /* gmac0_rxd2 */ - <2 RK_PA3 2 &pcfg_pull_none>, - /* gmac0_rxd3 */ - <2 RK_PA4 2 &pcfg_pull_none>, - /* gmac0_txd2 */ - <2 RK_PA6 2 &pcfg_pull_none_drv_level_3>, - /* gmac0_txd3 */ - <2 RK_PA7 2 &pcfg_pull_none_drv_level_3>; - }; - - /omit-if-no-ref/ - gmac1m0_tx_bus2_level3: gmac1m0-tx-bus2-level3 { - rockchip,pins = - /* gmac1_txd0m0 */ - <3 RK_PB5 3 &pcfg_pull_none_drv_level_3>, - /* gmac1_txd1m0 */ - <3 RK_PB6 3 &pcfg_pull_none_drv_level_3>, - /* gmac1_txenm0 */ - <3 RK_PB7 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac1m0_rgmii_bus_level3: gmac1m0-rgmii-bus-level3 { - rockchip,pins = - /* gmac1_rxd2m0 */ - <3 RK_PA4 3 &pcfg_pull_none>, - /* gmac1_rxd3m0 */ - <3 RK_PA5 3 &pcfg_pull_none>, - /* gmac1_txd2m0 */ - <3 RK_PA2 3 &pcfg_pull_none_drv_level_3>, - /* gmac1_txd3m0 */ - <3 RK_PA3 3 &pcfg_pull_none_drv_level_3>; - }; - - /omit-if-no-ref/ - gmac1m1_tx_bus2_level3: gmac1m1-tx-bus2-level3 { - rockchip,pins = - /* gmac1_txd0m1 */ - <4 RK_PA4 3 &pcfg_pull_none_drv_level_3>, - /* gmac1_txd1m1 */ - <4 RK_PA5 3 &pcfg_pull_none_drv_level_3>, - /* gmac1_txenm1 */ - <4 RK_PA6 3 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - gmac1m1_rgmii_bus_level3: gmac1m1-rgmii-bus-level3 { - rockchip,pins = - /* gmac1_rxd2m1 */ - <4 RK_PA1 3 &pcfg_pull_none>, - /* gmac1_rxd3m1 */ - <4 RK_PA2 3 &pcfg_pull_none>, - /* gmac1_txd2m1 */ - <3 RK_PD6 3 &pcfg_pull_none_drv_level_3>, - /* gmac1_txd3m1 */ - <3 RK_PD7 3 &pcfg_pull_none_drv_level_3>; - }; - }; - - gmac-txc-level2 { - /omit-if-no-ref/ - gmac0_rgmii_clk_level2: gmac0-rgmii-clk-level2 { - rockchip,pins = - /* gmac0_rxclk */ - <2 RK_PA5 2 &pcfg_pull_none>, - /* gmac0_txclk */ - <2 RK_PB0 2 &pcfg_pull_none_drv_level_2>; - }; - - /omit-if-no-ref/ - gmac1m0_rgmii_clk_level2: gmac1m0-rgmii-clk-level2 { - rockchip,pins = - /* gmac1_rxclkm0 */ - <3 RK_PA7 3 &pcfg_pull_none>, - /* gmac1_txclkm0 */ - <3 RK_PA6 3 &pcfg_pull_none_drv_level_2>; - }; - - /omit-if-no-ref/ - gmac1m1_rgmii_clk_level2: gmac1m1-rgmii-clk-level2 { - rockchip,pins = - /* gmac1_rxclkm1 */ - <4 RK_PA3 3 &pcfg_pull_none>, - /* gmac1_txclkm1 */ - <4 RK_PA0 3 &pcfg_pull_none_drv_level_2>; - }; - }; - - tsadc { - /omit-if-no-ref/ - tsadc_pin: tsadc-pin { - rockchip,pins = - /* tsadc_pin */ - <0 RK_PA1 0 &pcfg_pull_none>; - }; - }; - - lcdc { - /omit-if-no-ref/ - lcdc_clock: lcdc-clock { - rockchip,pins = - /* lcdc_clk */ - <3 RK_PA0 1 &pcfg_pull_none>, - /* lcdc_den */ - <3 RK_PC3 1 &pcfg_pull_none>, - /* lcdc_hsync */ - <3 RK_PC1 1 &pcfg_pull_none>, - /* lcdc_vsync */ - <3 RK_PC2 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - lcdc_data16: lcdc-data16 { - rockchip,pins = - /* lcdc_d3 */ - <2 RK_PD3 1 &pcfg_pull_none>, - /* lcdc_d4 */ - <2 RK_PD4 1 &pcfg_pull_none>, - /* lcdc_d5 */ - <2 RK_PD5 1 &pcfg_pull_none>, - /* lcdc_d6 */ - <2 RK_PD6 1 &pcfg_pull_none>, - /* lcdc_d7 */ - <2 RK_PD7 1 &pcfg_pull_none>, - /* lcdc_d10 */ - <3 RK_PA3 1 &pcfg_pull_none>, - /* lcdc_d11 */ - <3 RK_PA4 1 &pcfg_pull_none>, - /* lcdc_d12 */ - <3 RK_PA5 1 &pcfg_pull_none>, - /* lcdc_d13 */ - <3 RK_PA6 1 &pcfg_pull_none>, - /* lcdc_d14 */ - <3 RK_PA7 1 &pcfg_pull_none>, - /* lcdc_d15 */ - <3 RK_PB0 1 &pcfg_pull_none>, - /* lcdc_d19 */ - <3 RK_PB4 1 &pcfg_pull_none>, - /* lcdc_d20 */ - <3 RK_PB5 1 &pcfg_pull_none>, - /* lcdc_d21 */ - <3 RK_PB6 1 &pcfg_pull_none>, - /* lcdc_d22 */ - <3 RK_PB7 1 &pcfg_pull_none>, - /* lcdc_d23 */ - <3 RK_PC0 1 &pcfg_pull_none>; - }; - - /omit-if-no-ref/ - lcdc_data18: lcdc-data18 { - rockchip,pins = - /* lcdc_d2 */ - <2 RK_PD2 1 &pcfg_pull_none>, - /* lcdc_d3 */ - <2 RK_PD3 1 &pcfg_pull_none>, - /* lcdc_d4 */ - <2 RK_PD4 1 &pcfg_pull_none>, - /* lcdc_d5 */ - <2 RK_PD5 1 &pcfg_pull_none>, - /* lcdc_d6 */ - <2 RK_PD6 1 &pcfg_pull_none>, - /* lcdc_d7 */ - <2 RK_PD7 1 &pcfg_pull_none>, - /* lcdc_d10 */ - <3 RK_PA3 1 &pcfg_pull_none>, - /* lcdc_d11 */ - <3 RK_PA4 1 &pcfg_pull_none>, - /* lcdc_d12 */ - <3 RK_PA5 1 &pcfg_pull_none>, - /* lcdc_d13 */ - <3 RK_PA6 1 &pcfg_pull_none>, - /* lcdc_d14 */ - <3 RK_PA7 1 &pcfg_pull_none>, - /* lcdc_d15 */ - <3 RK_PB0 1 &pcfg_pull_none>, - /* lcdc_d18 */ - <3 RK_PB3 1 &pcfg_pull_none>, - /* lcdc_d19 */ - <3 RK_PB4 1 &pcfg_pull_none>, - /* lcdc_d20 */ - <3 RK_PB5 1 &pcfg_pull_none>, - /* lcdc_d21 */ - <3 RK_PB6 1 &pcfg_pull_none>, - /* lcdc_d22 */ - <3 RK_PB7 1 &pcfg_pull_none>, - /* lcdc_d23 */ - <3 RK_PC0 1 &pcfg_pull_none>; - }; - }; - -}; diff --git a/arch/arm/dts/rk3568-radxa-cm3i.dtsi b/arch/arm/dts/rk3568-radxa-cm3i.dtsi deleted file mode 100644 index 45b03dcbbad4..000000000000 --- a/arch/arm/dts/rk3568-radxa-cm3i.dtsi +++ /dev/null @@ -1,412 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include "rk3568.dtsi" - -/ { - compatible = "radxa,cm3i", "rockchip,rk3568"; - - aliases { - mmc0 = &sdhci; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - gpio-leds { - compatible = "gpio-leds"; - - led_user: led-0 { - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_HEARTBEAT; - color = <LED_COLOR_ID_GREEN>; - linux,default-trigger = "heartbeat"; - pinctrl-names = "default"; - pinctrl-0 = <&led_user_en>; - }; - }; - - pcie30_avdd0v9: pcie30-avdd0v9-regulator { - compatible = "regulator-fixed"; - regulator-name = "pcie30_avdd0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - vin-supply = <&vcc3v3_sys>; - }; - - pcie30_avdd1v8: pcie30-avdd1v8-regulator { - compatible = "regulator-fixed"; - regulator-name = "pcie30_avdd1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc3v3_sys>; - }; - - vcc3v3_sys: vcc3v3-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v_input>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v_input>; - }; - - /* labeled +5v_input in schematic */ - vcc5v_input: vcc5v-input-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v_input"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; -}; - -&combphy0 { - status = "okay"; -}; - -&combphy1 { - status = "okay"; -}; - -&combphy2 { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&display_subsystem { - status = "disabled"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v_input>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-name = "vdd_npu"; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-name = "vdda0v9_image"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-name = "vdda_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-name = "vdda0v9_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-name = "vccio_acodec"; - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-name = "vcc3v3_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-name = "vcca1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-name = "vcca1v8_image"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-name = "vcc3v3_sd"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&pinctrl { - leds { - led_user_en: led_user_en { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic_int { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio2-supply = <&vcc_1v8>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_1v8>; - vccio7-supply = <&vcc_3v3>; - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca_1v8>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - max-frequency = <200000000>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy1 { - status = "okay"; -}; - -&usb_host0_xhci { - extcon = <&usb2phy0>; -}; diff --git a/arch/arm/dts/rk3568-radxa-e25.dts b/arch/arm/dts/rk3568-radxa-e25.dts deleted file mode 100644 index 72ad74c38a2b..000000000000 --- a/arch/arm/dts/rk3568-radxa-e25.dts +++ /dev/null @@ -1,236 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; -#include "rk3568-radxa-cm3i.dtsi" - -/ { - model = "Radxa E25 Carrier Board"; - compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568"; - - aliases { - mmc1 = &sdmmc0; - }; - - pwm-leds { - compatible = "pwm-leds-multicolor"; - - multi-led { - color = <LED_COLOR_ID_RGB>; - max-brightness = <255>; - - led-red { - color = <LED_COLOR_ID_RED>; - pwms = <&pwm1 0 1000000 0>; - }; - - led-green { - color = <LED_COLOR_ID_GREEN>; - pwms = <&pwm2 0 1000000 0>; - }; - - led-blue { - color = <LED_COLOR_ID_BLUE>; - pwms = <&pwm12 0 1000000 0>; - }; - }; - }; - - vbus_typec: vbus-typec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vbus_typec_en>; - regulator-name = "vbus_typec"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_sys>; - }; - - /* actually fed by vcc5v0_sys, dependent - * on pi6c clock generator - */ - vcc3v3_minipcie: vcc3v3-minipcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&minipcie_enable_h>; - regulator-name = "vcc3v3_minipcie"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_pi6c_05>; - }; - - vcc3v3_ngff: vcc3v3-ngff-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&ngffpcie_enable_h>; - regulator-name = "vcc3v3_ngff"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie30x1_enable_h>; - regulator-name = "vcc3v3_pcie30x1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_enable_h>; - regulator-name = "vcc3v3_pcie"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&combphy1 { - phy-supply = <&vcc3v3_pcie30x1>; -}; - -&pcie2x1 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie20_reset_h>; - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pi6c_05>; - status = "okay"; -}; - -&pcie30phy { - data-lanes = <1 2>; - status = "okay"; -}; - -&pcie3x1 { - num-lanes = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie30x1m0_pins>; - reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_minipcie>; - status = "okay"; -}; - -&pcie3x2 { - num-lanes = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie30x2_reset_h>; - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pi6c_05>; - status = "okay"; -}; - -&pinctrl { - pcie { - pcie20_reset_h: pcie20-reset-h { - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie30x1_enable_h: pcie30x1-enable-h { - rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie30x2_reset_h: pcie30x2-reset-h { - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_enable_h: pcie-enable-h { - rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - minipcie_enable_h: minipcie-enable-h { - rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - ngffpcie_enable_h: ngffpcie-enable-h { - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vbus_typec_en: vbus_typec_en { - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&pwm12 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm12m1_pins>; - status = "okay"; -}; - -&sata1 { - status = "okay"; -}; - -&sdmmc0 { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - /* Also used in pcie30x1_clkreqnm0 */ - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v3_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host0_xhci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vbus_typec>; - status = "okay"; -}; - -&usb2phy1_host { - phy-supply = <&vcc3v3_minipcie>; - status = "okay"; -}; - -&usb2phy1_otg { - phy-supply = <&vcc3v3_ngff>; - status = "okay"; -}; diff --git a/arch/arm/dts/rk3568-rock-3a.dts b/arch/arm/dts/rk3568-rock-3a.dts deleted file mode 100644 index a5e974ea659e..000000000000 --- a/arch/arm/dts/rk3568-rock-3a.dts +++ /dev/null @@ -1,859 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3568.dtsi" - -/ { - model = "Radxa ROCK3 Model A"; - compatible = "radxa,rock3a", "rockchip,rk3568"; - - aliases { - ethernet0 = &gmac1; - mmc0 = &sdhci; - mmc1 = &sdmmc0; - mmc2 = &sdmmc2; - }; - - chosen: chosen { - stdout-path = "serial2:1500000n8"; - }; - - hdmi-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - gmac1_clkin: external-gmac1-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac1_clkin"; - #clock-cells = <0>; - }; - - leds { - compatible = "gpio-leds"; - - led_user: led-0 { - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_HEARTBEAT; - color = <LED_COLOR_ID_BLUE>; - linux,default-trigger = "heartbeat"; - pinctrl-names = "default"; - pinctrl-0 = <&led_user_en>; - }; - }; - - rk809-sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "Analog RK809"; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,cpu { - sound-dai = <&i2s1_8ch>; - }; - - simple-audio-card,codec { - sound-dai = <&rk809>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk809 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable>; - post-power-on-delay-ms = <100>; - power-off-delay-us = <5000000>; - reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; - }; - - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - }; - - pcie30_avdd0v9: pcie30-avdd0v9-regulator { - compatible = "regulator-fixed"; - regulator-name = "pcie30_avdd0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - vin-supply = <&vcc3v3_sys>; - }; - - pcie30_avdd1v8: pcie30-avdd1v8-regulator { - compatible = "regulator-fixed"; - regulator-name = "pcie30_avdd1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc3v3_sys>; - }; - - /* pi6c pcie clock generator */ - vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pi6c_03"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_enable_h>; - regulator-name = "vcc3v3_pcie"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_sys: vcc3v3-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc5v0_usb: vcc5v0-usb-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc5v0_usb_host: vcc5v0-usb-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb_host_en>; - regulator-name = "vcc5v0_usb_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_usb_hub: vcc5v0-usb-hub-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb_hub_en>; - regulator-name = "vcc5v0_usb_hub"; - regulator-always-on; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb_otg_en>; - regulator-name = "vcc5v0_usb_otg"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc_cam: vcc-cam-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_cam_en>; - regulator-name = "vcc_cam"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_mipi: vcc-mipi-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_mipi_en>; - regulator-name = "vcc_mipi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&combphy0 { - status = "okay"; -}; - -&combphy1 { - status = "okay"; -}; - -&combphy2 { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&gmac1 { - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; - clock_in_out = "input"; - phy-handle = <&rgmii_phy1>; - phy-mode = "rgmii-id"; - phy-supply = <&vcc_3v3>; - pinctrl-names = "default"; - pinctrl-0 = <&gmac1m1_miim - &gmac1m1_tx_bus2 - &gmac1m1_rx_bus2 - &gmac1m1_rgmii_clk - &gmac1m1_clkinout - &gmac1m1_rgmii_bus>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vdda0v9_image>; - avdd-1v8-supply = <&vcca1v8_image>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm1_cec>; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; - #clock-cells = <1>; - clock-names = "mclk"; - clocks = <&cru I2S1_MCLKOUT_TX>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; - rockchip,system-power-controller; - #sound-dai-cells = <0>; - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - wakeup-source; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-name = "vdd_npu"; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-name = "vdda0v9_image"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-name = "vdda_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-name = "vdda0v9_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-name = "vccio_acodec"; - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-name = "vcc3v3_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-name = "vcca1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-name = "vcca1v8_image"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-name = "vcc3v3_sd"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - - codec { - mic-in-differential; - }; - }; -}; - -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3m1_xfer>; - status = "disabled"; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4m1_xfer>; - status = "disabled"; -}; - -&i2c5 { - status = "okay"; - - hym8563: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <0>; - clock-output-names = "rtcic_32kout"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - wakeup-source; - }; -}; - -&i2s0_8ch { - status = "okay"; -}; - -&i2s1_8ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; - rockchip,trcm-sync-tx-only; - status = "okay"; -}; - -&i2s2_2ch { - rockchip,trcm-sync-tx-only; - status = "okay"; -}; - -&mdio1 { - rgmii_phy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - pinctrl-names = "default"; - pinctrl-0 = <ð_phy_rst>; - reset-assert-us = <20000>; - reset-deassert-us = <100000>; - reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; - }; -}; - -&pcie2x1 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_h>; - reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pcie30phy { - phy-supply = <&vcc3v3_pi6c_03>; - status = "okay"; -}; - -&pcie3x2 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie30x2m1_pins>; - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pinctrl { - cam { - vcc_cam_en: vcc_cam_en { - rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - display { - vcc_mipi_en: vcc_mipi_en { - rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - ethernet { - eth_phy_rst: eth_phy_rst { - rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - led_user_en: led_user_en { - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_enable_h: pcie-enable-h { - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_reset_h: pcie-reset-h { - rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic_int { - rockchip,pins = - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb { - vcc5v0_usb_host_en: vcc5v0_usb_host_en { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - vcc5v0_usb_hub_en: vcc5v0_usb_hub_en { - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - bt { - bt_enable: bt-enable { - rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake: bt-host-wake { - rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - bt_wake: bt-wake { - rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable: wifi-enable { - rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio2-supply = <&vcc_1v8>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_1v8>; - vccio7-supply = <&vcc_3v3>; - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca_1v8>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - max-frequency = <200000000>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc0 { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - sd-uhs-sdr50; - vmmc-supply = <&vcc3v3_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&sdmmc2 { - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v3_sys>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rk809 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>; - vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - /* vddio comes from regulator on module, use IO bank voltage instead */ - }; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host0_xhci { - extcon = <&usb2phy0>; - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb_host1_xhci { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_host { - phy-supply = <&vcc5v0_usb_host>; - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vcc5v0_usb_otg>; - status = "okay"; -}; - -&usb2phy1 { - status = "okay"; -}; - -&usb2phy1_host { - phy-supply = <&vcc5v0_usb_host>; - status = "okay"; -}; - -&usb2phy1_otg { - phy-supply = <&vcc5v0_usb_host>; - status = "okay"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi_in_vp0>; - }; -}; diff --git a/arch/arm/dts/rk3568.dtsi b/arch/arm/dts/rk3568.dtsi deleted file mode 100644 index f1be76a54ceb..000000000000 --- a/arch/arm/dts/rk3568.dtsi +++ /dev/null @@ -1,267 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. - */ - -#include "rk356x.dtsi" - -/ { - compatible = "rockchip,rk3568"; - - sata0: sata@fc000000 { - compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; - reg = <0 0xfc000000 0 0x1000>; - clocks = <&cru ACLK_SATA0>, <&cru CLK_SATA0_PMALIVE>, - <&cru CLK_SATA0_RXOOB>; - clock-names = "sata", "pmalive", "rxoob"; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - phys = <&combphy0 PHY_TYPE_SATA>; - phy-names = "sata-phy"; - ports-implemented = <0x1>; - power-domains = <&power RK3568_PD_PIPE>; - status = "disabled"; - }; - - pipe_phy_grf0: syscon@fdc70000 { - compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; - reg = <0x0 0xfdc70000 0x0 0x1000>; - }; - - qos_pcie3x1: qos@fe190080 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe190080 0x0 0x20>; - }; - - qos_pcie3x2: qos@fe190100 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe190100 0x0 0x20>; - }; - - qos_sata0: qos@fe190200 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe190200 0x0 0x20>; - }; - - pcie30_phy_grf: syscon@fdcb8000 { - compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon"; - reg = <0x0 0xfdcb8000 0x0 0x10000>; - }; - - pcie30phy: phy@fe8c0000 { - compatible = "rockchip,rk3568-pcie3-phy"; - reg = <0x0 0xfe8c0000 0x0 0x20000>; - #phy-cells = <0>; - clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>, - <&cru PCLK_PCIE30PHY>; - clock-names = "refclk_m", "refclk_n", "pclk"; - resets = <&cru SRST_PCIE30PHY>; - reset-names = "phy"; - rockchip,phy-grf = <&pcie30_phy_grf>; - status = "disabled"; - }; - - pcie3x1: pcie@fe270000 { - compatible = "rockchip,rk3568-pcie"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0xf>; - clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>, - <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>, - <&cru CLK_PCIE30X1_AUX_NDFT>; - clock-names = "aclk_mst", "aclk_slv", - "aclk_dbi", "pclk", "aux"; - device_type = "pci"; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie3x1_intc 0>, - <0 0 0 2 &pcie3x1_intc 1>, - <0 0 0 3 &pcie3x1_intc 2>, - <0 0 0 4 &pcie3x1_intc 3>; - linux,pci-domain = <1>; - num-ib-windows = <6>; - num-ob-windows = <2>; - max-link-speed = <3>; - msi-map = <0x0 &gic 0x1000 0x1000>; - num-lanes = <1>; - phys = <&pcie30phy>; - phy-names = "pcie-phy"; - power-domains = <&power RK3568_PD_PIPE>; - reg = <0x3 0xc0400000 0x0 0x00400000>, - <0x0 0xfe270000 0x0 0x00010000>, - <0x0 0xf2000000 0x0 0x00100000>; - ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>, - <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>, - <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>; - reg-names = "dbi", "apb", "config"; - resets = <&cru SRST_PCIE30X1_POWERUP>; - reset-names = "pipe"; - /* bifurcation; lane1 when using 1+1 */ - status = "disabled"; - - pcie3x1_intc: legacy-interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; - }; - }; - - pcie3x2: pcie@fe280000 { - compatible = "rockchip,rk3568-pcie"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0xf>; - clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>, - <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>, - <&cru CLK_PCIE30X2_AUX_NDFT>; - clock-names = "aclk_mst", "aclk_slv", - "aclk_dbi", "pclk", "aux"; - device_type = "pci"; - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie3x2_intc 0>, - <0 0 0 2 &pcie3x2_intc 1>, - <0 0 0 3 &pcie3x2_intc 2>, - <0 0 0 4 &pcie3x2_intc 3>; - linux,pci-domain = <2>; - num-ib-windows = <6>; - num-ob-windows = <2>; - max-link-speed = <3>; - msi-map = <0x0 &gic 0x2000 0x1000>; - num-lanes = <2>; - phys = <&pcie30phy>; - phy-names = "pcie-phy"; - power-domains = <&power RK3568_PD_PIPE>; - reg = <0x3 0xc0800000 0x0 0x00400000>, - <0x0 0xfe280000 0x0 0x00010000>, - <0x0 0xf0000000 0x0 0x00100000>; - ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>, - <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>, - <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>; - reg-names = "dbi", "apb", "config"; - resets = <&cru SRST_PCIE30X2_POWERUP>; - reset-names = "pipe"; - /* bifurcation; lane0 when using 1+1 */ - status = "disabled"; - - pcie3x2_intc: legacy-interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; - }; - }; - - gmac0: ethernet@fe2a0000 { - compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; - reg = <0x0 0xfe2a0000 0x0 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - clocks = <&cru SCLK_GMAC0>, <&cru SCLK_GMAC0_RX_TX>, - <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_MAC0_REFOUT>, - <&cru ACLK_GMAC0>, <&cru PCLK_GMAC0>, - <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>; - clock-names = "stmmaceth", "mac_clk_rx", - "mac_clk_tx", "clk_mac_refout", - "aclk_mac", "pclk_mac", - "clk_mac_speed", "ptp_ref"; - resets = <&cru SRST_A_GMAC0>; - reset-names = "stmmaceth"; - rockchip,grf = <&grf>; - snps,axi-config = <&gmac0_stmmac_axi_setup>; - snps,mixed-burst; - snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; - snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; - snps,tso; - status = "disabled"; - - mdio0: mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <0x1>; - #size-cells = <0x0>; - }; - - gmac0_stmmac_axi_setup: stmmac-axi-config { - snps,blen = <0 0 0 0 16 8 4>; - snps,rd_osr_lmt = <8>; - snps,wr_osr_lmt = <4>; - }; - - gmac0_mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <1>; - queue0 {}; - }; - - gmac0_mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <1>; - queue0 {}; - }; - }; - - combphy0: phy@fe820000 { - compatible = "rockchip,rk3568-naneng-combphy"; - reg = <0x0 0xfe820000 0x0 0x100>; - clocks = <&pmucru CLK_PCIEPHY0_REF>, - <&cru PCLK_PIPEPHY0>, - <&cru PCLK_PIPE>; - clock-names = "ref", "apb", "pipe"; - assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>; - assigned-clock-rates = <100000000>; - resets = <&cru SRST_PIPEPHY0>; - rockchip,pipe-grf = <&pipegrf>; - rockchip,pipe-phy-grf = <&pipe_phy_grf0>; - #phy-cells = <1>; - status = "disabled"; - }; -}; - -&cpu0_opp_table { - opp-1992000000 { - opp-hz = /bits/ 64 <1992000000>; - opp-microvolt = <1150000 1150000 1150000>; - }; -}; - -&pipegrf { - compatible = "rockchip,rk3568-pipe-grf", "syscon"; -}; - -&power { - power-domain@RK3568_PD_PIPE { - reg = <RK3568_PD_PIPE>; - clocks = <&cru PCLK_PIPE>; - pm_qos = <&qos_pcie2x1>, - <&qos_pcie3x1>, - <&qos_pcie3x2>, - <&qos_sata0>, - <&qos_sata1>, - <&qos_sata2>, - <&qos_usb3_0>, - <&qos_usb3_1>; - #power-domain-cells = <0>; - }; -}; - -&usb_host0_xhci { - phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>; - phy-names = "usb2-phy", "usb3-phy"; -}; - -&vop { - compatible = "rockchip,rk3568-vop"; -}; diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi deleted file mode 100644 index c19c0f1b3778..000000000000 --- a/arch/arm/dts/rk356x.dtsi +++ /dev/null @@ -1,1886 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. - */ - -#include <dt-bindings/clock/rk3568-cru.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/power/rk3568-power.h> -#include <dt-bindings/soc/rockchip,boot-mode.h> -#include <dt-bindings/thermal/thermal.h> - -/ { - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; - gpio3 = &gpio3; - gpio4 = &gpio4; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - serial6 = &uart6; - serial7 = &uart7; - serial8 = &uart8; - serial9 = &uart9; - spi0 = &spi0; - spi1 = &spi1; - spi2 = &spi2; - spi3 = &spi3; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x0>; - clocks = <&scmi_clk 0>; - #cooling-cells = <2>; - enable-method = "psci"; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu1: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x100>; - #cooling-cells = <2>; - enable-method = "psci"; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu2: cpu@200 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x200>; - #cooling-cells = <2>; - enable-method = "psci"; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu3: cpu@300 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x300>; - #cooling-cells = <2>; - enable-method = "psci"; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-408000000 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <900000 900000 1150000>; - clock-latency-ns = <40000>; - }; - - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <900000 900000 1150000>; - }; - - opp-816000000 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <900000 900000 1150000>; - opp-suspend; - }; - - opp-1104000000 { - opp-hz = /bits/ 64 <1104000000>; - opp-microvolt = <900000 900000 1150000>; - }; - - opp-1416000000 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <900000 900000 1150000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <975000 975000 1150000>; - }; - - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1050000 1050000 1150000>; - }; - }; - - display_subsystem: display-subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vop_out>; - }; - - firmware { - scmi: scmi { - compatible = "arm,scmi-smc"; - arm,smc-id = <0x82000010>; - shmem = <&scmi_shmem>; - #address-cells = <1>; - #size-cells = <0>; - - scmi_clk: protocol@14 { - reg = <0x14>; - #clock-cells = <1>; - }; - }; - }; - - gpu_opp_table: opp-table-1 { - compatible = "operating-points-v2"; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <825000>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <825000>; - }; - - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <825000>; - }; - - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <825000>; - }; - - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <900000>; - }; - - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1000000>; - }; - }; - - hdmi_sound: hdmi-sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "HDMI"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - status = "disabled"; - - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - - simple-audio-card,cpu { - sound-dai = <&i2s0_8ch>; - }; - }; - - pmu { - compatible = "arm,cortex-a55-pmu"; - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; - arm,no-tick-in-suspend; - }; - - xin24m: xin24m { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xin24m"; - #clock-cells = <0>; - }; - - xin32k: xin32k { - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - pinctrl-0 = <&clk32k_out0>; - pinctrl-names = "default"; - #clock-cells = <0>; - }; - - sram@10f000 { - compatible = "mmio-sram"; - reg = <0x0 0x0010f000 0x0 0x100>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x0010f000 0x100>; - - scmi_shmem: sram@0 { - compatible = "arm,scmi-shmem"; - reg = <0x0 0x100>; - }; - }; - - sata1: sata@fc400000 { - compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; - reg = <0 0xfc400000 0 0x1000>; - clocks = <&cru ACLK_SATA1>, <&cru CLK_SATA1_PMALIVE>, - <&cru CLK_SATA1_RXOOB>; - clock-names = "sata", "pmalive", "rxoob"; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - phys = <&combphy1 PHY_TYPE_SATA>; - phy-names = "sata-phy"; - ports-implemented = <0x1>; - power-domains = <&power RK3568_PD_PIPE>; - status = "disabled"; - }; - - sata2: sata@fc800000 { - compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; - reg = <0 0xfc800000 0 0x1000>; - clocks = <&cru ACLK_SATA2>, <&cru CLK_SATA2_PMALIVE>, - <&cru CLK_SATA2_RXOOB>; - clock-names = "sata", "pmalive", "rxoob"; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - phys = <&combphy2 PHY_TYPE_SATA>; - phy-names = "sata-phy"; - ports-implemented = <0x1>; - power-domains = <&power RK3568_PD_PIPE>; - status = "disabled"; - }; - - usb_host0_xhci: usb@fcc00000 { - compatible = "rockchip,rk3568-dwc3", "snps,dwc3"; - reg = <0x0 0xfcc00000 0x0 0x400000>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>, - <&cru ACLK_USB3OTG0>; - clock-names = "ref_clk", "suspend_clk", - "bus_clk"; - dr_mode = "otg"; - phy_type = "utmi_wide"; - power-domains = <&power RK3568_PD_PIPE>; - resets = <&cru SRST_USB3OTG0>; - snps,dis_u2_susphy_quirk; - status = "disabled"; - }; - - usb_host1_xhci: usb@fd000000 { - compatible = "rockchip,rk3568-dwc3", "snps,dwc3"; - reg = <0x0 0xfd000000 0x0 0x400000>; - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>, - <&cru ACLK_USB3OTG1>; - clock-names = "ref_clk", "suspend_clk", - "bus_clk"; - dr_mode = "host"; - phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>; - phy-names = "usb2-phy", "usb3-phy"; - phy_type = "utmi_wide"; - power-domains = <&power RK3568_PD_PIPE>; - resets = <&cru SRST_USB3OTG1>; - snps,dis_u2_susphy_quirk; - status = "disabled"; - }; - - gic: interrupt-controller@fd400000 { - compatible = "arm,gic-v3"; - reg = <0x0 0xfd400000 0 0x10000>, /* GICD */ - <0x0 0xfd460000 0 0x80000>; /* GICR */ - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <3>; - mbi-alias = <0x0 0xfd410000>; - mbi-ranges = <296 24>; - msi-controller; - }; - - usb_host0_ehci: usb@fd800000 { - compatible = "generic-ehci"; - reg = <0x0 0xfd800000 0x0 0x40000>; - interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>, - <&cru PCLK_USB>; - phys = <&usb2phy1_otg>; - phy-names = "usb"; - status = "disabled"; - }; - - usb_host0_ohci: usb@fd840000 { - compatible = "generic-ohci"; - reg = <0x0 0xfd840000 0x0 0x40000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>, - <&cru PCLK_USB>; - phys = <&usb2phy1_otg>; - phy-names = "usb"; - status = "disabled"; - }; - - usb_host1_ehci: usb@fd880000 { - compatible = "generic-ehci"; - reg = <0x0 0xfd880000 0x0 0x40000>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>, - <&cru PCLK_USB>; - phys = <&usb2phy1_host>; - phy-names = "usb"; - status = "disabled"; - }; - - usb_host1_ohci: usb@fd8c0000 { - compatible = "generic-ohci"; - reg = <0x0 0xfd8c0000 0x0 0x40000>; - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>, - <&cru PCLK_USB>; - phys = <&usb2phy1_host>; - phy-names = "usb"; - status = "disabled"; - }; - - pmugrf: syscon@fdc20000 { - compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd"; - reg = <0x0 0xfdc20000 0x0 0x10000>; - - pmu_io_domains: io-domains { - compatible = "rockchip,rk3568-pmu-io-voltage-domain"; - status = "disabled"; - }; - }; - - pipegrf: syscon@fdc50000 { - reg = <0x0 0xfdc50000 0x0 0x1000>; - }; - - grf: syscon@fdc60000 { - compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd"; - reg = <0x0 0xfdc60000 0x0 0x10000>; - }; - - pipe_phy_grf1: syscon@fdc80000 { - compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; - reg = <0x0 0xfdc80000 0x0 0x1000>; - }; - - pipe_phy_grf2: syscon@fdc90000 { - compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; - reg = <0x0 0xfdc90000 0x0 0x1000>; - }; - - usb2phy0_grf: syscon@fdca0000 { - compatible = "rockchip,rk3568-usb2phy-grf", "syscon"; - reg = <0x0 0xfdca0000 0x0 0x8000>; - }; - - usb2phy1_grf: syscon@fdca8000 { - compatible = "rockchip,rk3568-usb2phy-grf", "syscon"; - reg = <0x0 0xfdca8000 0x0 0x8000>; - }; - - pmucru: clock-controller@fdd00000 { - compatible = "rockchip,rk3568-pmucru"; - reg = <0x0 0xfdd00000 0x0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - cru: clock-controller@fdd20000 { - compatible = "rockchip,rk3568-cru"; - reg = <0x0 0xfdd20000 0x0 0x1000>; - clocks = <&xin24m>; - clock-names = "xin24m"; - #clock-cells = <1>; - #reset-cells = <1>; - assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, <&pmucru PLL_PPLL>; - assigned-clock-rates = <32768>, <1200000000>, <200000000>; - assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>; - rockchip,grf = <&grf>; - }; - - i2c0: i2c@fdd40000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfdd40000 0x0 0x1000>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart0: serial@fdd50000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfdd50000 0x0 0x100>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 0>, <&dmac0 1>; - pinctrl-0 = <&uart0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - pwm0: pwm@fdd70000 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfdd70000 0x0 0x10>; - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm0m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm1: pwm@fdd70010 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfdd70010 0x0 0x10>; - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm1m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm2: pwm@fdd70020 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfdd70020 0x0 0x10>; - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm2m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm3: pwm@fdd70030 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfdd70030 0x0 0x10>; - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm3_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pmu: power-management@fdd90000 { - compatible = "rockchip,rk3568-pmu", "syscon", "simple-mfd"; - reg = <0x0 0xfdd90000 0x0 0x1000>; - - power: power-controller { - compatible = "rockchip,rk3568-power-controller"; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - /* These power domains are grouped by VD_GPU */ - power-domain@RK3568_PD_GPU { - reg = <RK3568_PD_GPU>; - clocks = <&cru ACLK_GPU_PRE>, - <&cru PCLK_GPU_PRE>; - pm_qos = <&qos_gpu>; - #power-domain-cells = <0>; - }; - - /* These power domains are grouped by VD_LOGIC */ - power-domain@RK3568_PD_VI { - reg = <RK3568_PD_VI>; - clocks = <&cru HCLK_VI>, - <&cru PCLK_VI>; - pm_qos = <&qos_isp>, - <&qos_vicap0>, - <&qos_vicap1>; - #power-domain-cells = <0>; - }; - - power-domain@RK3568_PD_VO { - reg = <RK3568_PD_VO>; - clocks = <&cru HCLK_VO>, - <&cru PCLK_VO>, - <&cru ACLK_VOP_PRE>; - pm_qos = <&qos_hdcp>, - <&qos_vop_m0>, - <&qos_vop_m1>; - #power-domain-cells = <0>; - }; - - power-domain@RK3568_PD_RGA { - reg = <RK3568_PD_RGA>; - clocks = <&cru HCLK_RGA_PRE>, - <&cru PCLK_RGA_PRE>; - pm_qos = <&qos_ebc>, - <&qos_iep>, - <&qos_jpeg_dec>, - <&qos_jpeg_enc>, - <&qos_rga_rd>, - <&qos_rga_wr>; - #power-domain-cells = <0>; - }; - - power-domain@RK3568_PD_VPU { - reg = <RK3568_PD_VPU>; - clocks = <&cru HCLK_VPU_PRE>; - pm_qos = <&qos_vpu>; - #power-domain-cells = <0>; - }; - - power-domain@RK3568_PD_RKVDEC { - clocks = <&cru HCLK_RKVDEC_PRE>; - reg = <RK3568_PD_RKVDEC>; - pm_qos = <&qos_rkvdec>; - #power-domain-cells = <0>; - }; - - power-domain@RK3568_PD_RKVENC { - reg = <RK3568_PD_RKVENC>; - clocks = <&cru HCLK_RKVENC_PRE>; - pm_qos = <&qos_rkvenc_rd_m0>, - <&qos_rkvenc_rd_m1>, - <&qos_rkvenc_wr_m0>; - #power-domain-cells = <0>; - }; - }; - }; - - gpu: gpu@fde60000 { - compatible = "rockchip,rk3568-mali", "arm,mali-bifrost"; - reg = <0x0 0xfde60000 0x0 0x4000>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&scmi_clk 1>, <&cru CLK_GPU>; - clock-names = "gpu", "bus"; - #cooling-cells = <2>; - operating-points-v2 = <&gpu_opp_table>; - power-domains = <&power RK3568_PD_GPU>; - status = "disabled"; - }; - - vpu: video-codec@fdea0400 { - compatible = "rockchip,rk3568-vpu"; - reg = <0x0 0xfdea0000 0x0 0x800>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; - clock-names = "aclk", "hclk"; - iommus = <&vdpu_mmu>; - power-domains = <&power RK3568_PD_VPU>; - }; - - vdpu_mmu: iommu@fdea0800 { - compatible = "rockchip,rk3568-iommu"; - reg = <0x0 0xfdea0800 0x0 0x40>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "aclk", "iface"; - clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; - power-domains = <&power RK3568_PD_VPU>; - #iommu-cells = <0>; - }; - - rga: rga@fdeb0000 { - compatible = "rockchip,rk3568-rga", "rockchip,rk3288-rga"; - reg = <0x0 0xfdeb0000 0x0 0x180>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru CLK_RGA_CORE>; - clock-names = "aclk", "hclk", "sclk"; - resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; - reset-names = "core", "axi", "ahb"; - power-domains = <&power RK3568_PD_RGA>; - }; - - vepu: video-codec@fdee0000 { - compatible = "rockchip,rk3568-vepu"; - reg = <0x0 0xfdee0000 0x0 0x800>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>; - clock-names = "aclk", "hclk"; - iommus = <&vepu_mmu>; - power-domains = <&power RK3568_PD_RGA>; - }; - - vepu_mmu: iommu@fdee0800 { - compatible = "rockchip,rk3568-iommu"; - reg = <0x0 0xfdee0800 0x0 0x40>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>; - clock-names = "aclk", "iface"; - power-domains = <&power RK3568_PD_RGA>; - #iommu-cells = <0>; - }; - - sdmmc2: mmc@fe000000 { - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe000000 0x0 0x4000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>, - <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <150000000>; - resets = <&cru SRST_SDMMC2>; - reset-names = "reset"; - status = "disabled"; - }; - - gmac1: ethernet@fe010000 { - compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; - reg = <0x0 0xfe010000 0x0 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - clocks = <&cru SCLK_GMAC1>, <&cru SCLK_GMAC1_RX_TX>, - <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_MAC1_REFOUT>, - <&cru ACLK_GMAC1>, <&cru PCLK_GMAC1>, - <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_GMAC1_PTP_REF>; - clock-names = "stmmaceth", "mac_clk_rx", - "mac_clk_tx", "clk_mac_refout", - "aclk_mac", "pclk_mac", - "clk_mac_speed", "ptp_ref"; - resets = <&cru SRST_A_GMAC1>; - reset-names = "stmmaceth"; - rockchip,grf = <&grf>; - snps,axi-config = <&gmac1_stmmac_axi_setup>; - snps,mixed-burst; - snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; - snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; - snps,tso; - status = "disabled"; - - mdio1: mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <0x1>; - #size-cells = <0x0>; - }; - - gmac1_stmmac_axi_setup: stmmac-axi-config { - snps,blen = <0 0 0 0 16 8 4>; - snps,rd_osr_lmt = <8>; - snps,wr_osr_lmt = <4>; - }; - - gmac1_mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <1>; - queue0 {}; - }; - - gmac1_mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <1>; - queue0 {}; - }; - }; - - vop: vop@fe040000 { - reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>; - reg-names = "vop", "gamma-lut"; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>, - <&cru DCLK_VOP1>, <&cru DCLK_VOP2>; - clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2"; - iommus = <&vop_mmu>; - power-domains = <&power RK3568_PD_VO>; - rockchip,grf = <&grf>; - status = "disabled"; - - vop_out: ports { - #address-cells = <1>; - #size-cells = <0>; - - vp0: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - vp1: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - - vp2: port@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; - - vop_mmu: iommu@fe043e00 { - compatible = "rockchip,rk3568-iommu"; - reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - status = "disabled"; - }; - - dsi0: dsi@fe060000 { - compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; - reg = <0x00 0xfe060000 0x00 0x10000>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk"; - clocks = <&cru PCLK_DSITX_0>; - phy-names = "dphy"; - phys = <&dsi_dphy0>; - power-domains = <&power RK3568_PD_VO>; - reset-names = "apb"; - resets = <&cru SRST_P_DSITX_0>; - rockchip,grf = <&grf>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - dsi0_in: port@0 { - reg = <0>; - }; - - dsi0_out: port@1 { - reg = <1>; - }; - }; - }; - - dsi1: dsi@fe070000 { - compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; - reg = <0x0 0xfe070000 0x0 0x10000>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk"; - clocks = <&cru PCLK_DSITX_1>; - phy-names = "dphy"; - phys = <&dsi_dphy1>; - power-domains = <&power RK3568_PD_VO>; - reset-names = "apb"; - resets = <&cru SRST_P_DSITX_1>; - rockchip,grf = <&grf>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - dsi1_in: port@0 { - reg = <0>; - }; - - dsi1_out: port@1 { - reg = <1>; - }; - }; - }; - - hdmi: hdmi@fe0a0000 { - compatible = "rockchip,rk3568-dw-hdmi"; - reg = <0x0 0xfe0a0000 0x0 0x20000>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_HDMI_HOST>, - <&cru CLK_HDMI_SFR>, - <&cru CLK_HDMI_CEC>, - <&pmucru CLK_HDMI_REF>, - <&cru HCLK_VO>; - clock-names = "iahb", "isfr", "cec", "ref"; - pinctrl-names = "default"; - pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>; - power-domains = <&power RK3568_PD_VO>; - reg-io-width = <4>; - rockchip,grf = <&grf>; - #sound-dai-cells = <0>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - hdmi_in: port@0 { - reg = <0>; - }; - - hdmi_out: port@1 { - reg = <1>; - }; - }; - }; - - qos_gpu: qos@fe128000 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe128000 0x0 0x20>; - }; - - qos_rkvenc_rd_m0: qos@fe138080 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe138080 0x0 0x20>; - }; - - qos_rkvenc_rd_m1: qos@fe138100 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe138100 0x0 0x20>; - }; - - qos_rkvenc_wr_m0: qos@fe138180 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe138180 0x0 0x20>; - }; - - qos_isp: qos@fe148000 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe148000 0x0 0x20>; - }; - - qos_vicap0: qos@fe148080 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe148080 0x0 0x20>; - }; - - qos_vicap1: qos@fe148100 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe148100 0x0 0x20>; - }; - - qos_vpu: qos@fe150000 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe150000 0x0 0x20>; - }; - - qos_ebc: qos@fe158000 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe158000 0x0 0x20>; - }; - - qos_iep: qos@fe158100 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe158100 0x0 0x20>; - }; - - qos_jpeg_dec: qos@fe158180 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe158180 0x0 0x20>; - }; - - qos_jpeg_enc: qos@fe158200 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe158200 0x0 0x20>; - }; - - qos_rga_rd: qos@fe158280 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe158280 0x0 0x20>; - }; - - qos_rga_wr: qos@fe158300 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe158300 0x0 0x20>; - }; - - qos_npu: qos@fe180000 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe180000 0x0 0x20>; - }; - - qos_pcie2x1: qos@fe190000 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe190000 0x0 0x20>; - }; - - qos_sata1: qos@fe190280 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe190280 0x0 0x20>; - }; - - qos_sata2: qos@fe190300 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe190300 0x0 0x20>; - }; - - qos_usb3_0: qos@fe190380 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe190380 0x0 0x20>; - }; - - qos_usb3_1: qos@fe190400 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe190400 0x0 0x20>; - }; - - qos_rkvdec: qos@fe198000 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe198000 0x0 0x20>; - }; - - qos_hdcp: qos@fe1a8000 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe1a8000 0x0 0x20>; - }; - - qos_vop_m0: qos@fe1a8080 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe1a8080 0x0 0x20>; - }; - - qos_vop_m1: qos@fe1a8100 { - compatible = "rockchip,rk3568-qos", "syscon"; - reg = <0x0 0xfe1a8100 0x0 0x20>; - }; - - dfi: dfi@fe230000 { - compatible = "rockchip,rk3568-dfi"; - reg = <0x00 0xfe230000 0x00 0x400>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - rockchip,pmu = <&pmugrf>; - }; - - pcie2x1: pcie@fe260000 { - compatible = "rockchip,rk3568-pcie"; - reg = <0x3 0xc0000000 0x0 0x00400000>, - <0x0 0xfe260000 0x0 0x00010000>, - <0x0 0xf4000000 0x0 0x00100000>; - reg-names = "dbi", "apb", "config"; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; - bus-range = <0x0 0xf>; - clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>, - <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>, - <&cru CLK_PCIE20_AUX_NDFT>; - clock-names = "aclk_mst", "aclk_slv", - "aclk_dbi", "pclk", "aux"; - device_type = "pci"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc 0>, - <0 0 0 2 &pcie_intc 1>, - <0 0 0 3 &pcie_intc 2>, - <0 0 0 4 &pcie_intc 3>; - linux,pci-domain = <0>; - num-ib-windows = <6>; - num-ob-windows = <2>; - max-link-speed = <2>; - msi-map = <0x0 &gic 0x0 0x1000>; - num-lanes = <1>; - phys = <&combphy2 PHY_TYPE_PCIE>; - phy-names = "pcie-phy"; - power-domains = <&power RK3568_PD_PIPE>; - ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>, - <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x01e00000>, - <0x03000000 0x0 0x40000000 0x3 0x00000000 0x0 0x40000000>; - resets = <&cru SRST_PCIE20_POWERUP>; - reset-names = "pipe"; - #address-cells = <3>; - #size-cells = <2>; - status = "disabled"; - - pcie_intc: legacy-interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; - }; - }; - - sdmmc0: mmc@fe2b0000 { - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe2b0000 0x0 0x4000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>, - <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <150000000>; - resets = <&cru SRST_SDMMC0>; - reset-names = "reset"; - status = "disabled"; - }; - - sdmmc1: mmc@fe2c0000 { - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe2c0000 0x0 0x4000>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>, - <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <150000000>; - resets = <&cru SRST_SDMMC1>; - reset-names = "reset"; - status = "disabled"; - }; - - sfc: spi@fe300000 { - compatible = "rockchip,sfc"; - reg = <0x0 0xfe300000 0x0 0x4000>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; - clock-names = "clk_sfc", "hclk_sfc"; - pinctrl-0 = <&fspi_pins>; - pinctrl-names = "default"; - status = "disabled"; - }; - - sdhci: mmc@fe310000 { - compatible = "rockchip,rk3568-dwcmshc"; - reg = <0x0 0xfe310000 0x0 0x10000>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>; - assigned-clock-rates = <200000000>, <24000000>; - clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>, - <&cru ACLK_EMMC>, <&cru BCLK_EMMC>, - <&cru TCLK_EMMC>; - clock-names = "core", "bus", "axi", "block", "timer"; - status = "disabled"; - }; - - i2s0_8ch: i2s@fe400000 { - compatible = "rockchip,rk3568-i2s-tdm"; - reg = <0x0 0xfe400000 0x0 0x1000>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; - assigned-clock-rates = <1188000000>, <1188000000>; - clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - dmas = <&dmac1 0>; - dma-names = "tx"; - resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; - reset-names = "tx-m", "rx-m"; - rockchip,grf = <&grf>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s1_8ch: i2s@fe410000 { - compatible = "rockchip,rk3568-i2s-tdm"; - reg = <0x0 0xfe410000 0x0 0x1000>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - assigned-clocks = <&cru CLK_I2S1_8CH_TX_SRC>, <&cru CLK_I2S1_8CH_RX_SRC>; - assigned-clock-rates = <1188000000>, <1188000000>; - clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, - <&cru HCLK_I2S1_8CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - dmas = <&dmac1 3>, <&dmac1 2>; - dma-names = "rx", "tx"; - resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; - reset-names = "tx-m", "rx-m"; - rockchip,grf = <&grf>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx - &i2s1m0_lrcktx &i2s1m0_lrckrx - &i2s1m0_sdi0 &i2s1m0_sdi1 - &i2s1m0_sdi2 &i2s1m0_sdi3 - &i2s1m0_sdo0 &i2s1m0_sdo1 - &i2s1m0_sdo2 &i2s1m0_sdo3>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s2_2ch: i2s@fe420000 { - compatible = "rockchip,rk3568-i2s-tdm"; - reg = <0x0 0xfe420000 0x0 0x1000>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - assigned-clocks = <&cru CLK_I2S2_2CH_SRC>; - assigned-clock-rates = <1188000000>; - clocks = <&cru MCLK_I2S2_2CH>, <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - dmas = <&dmac1 4>, <&dmac1 5>; - dma-names = "tx", "rx"; - resets = <&cru SRST_M_I2S2_2CH>; - reset-names = "m"; - rockchip,grf = <&grf>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s2m0_sclktx - &i2s2m0_lrcktx - &i2s2m0_sdi - &i2s2m0_sdo>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s3_2ch: i2s@fe430000 { - compatible = "rockchip,rk3568-i2s-tdm"; - reg = <0x0 0xfe430000 0x0 0x1000>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru MCLK_I2S3_2CH_TX>, <&cru MCLK_I2S3_2CH_RX>, - <&cru HCLK_I2S3_2CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - dmas = <&dmac1 6>, <&dmac1 7>; - dma-names = "tx", "rx"; - resets = <&cru SRST_M_I2S3_2CH_TX>, <&cru SRST_M_I2S3_2CH_RX>; - reset-names = "tx-m", "rx-m"; - rockchip,grf = <&grf>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - pdm: pdm@fe440000 { - compatible = "rockchip,rk3568-pdm"; - reg = <0x0 0xfe440000 0x0 0x1000>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru MCLK_PDM>, <&cru HCLK_PDM>; - clock-names = "pdm_clk", "pdm_hclk"; - dmas = <&dmac1 9>; - dma-names = "rx"; - pinctrl-0 = <&pdmm0_clk - &pdmm0_clk1 - &pdmm0_sdi0 - &pdmm0_sdi1 - &pdmm0_sdi2 - &pdmm0_sdi3>; - pinctrl-names = "default"; - resets = <&cru SRST_M_PDM>; - reset-names = "pdm-m"; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - spdif: spdif@fe460000 { - compatible = "rockchip,rk3568-spdif"; - reg = <0x0 0xfe460000 0x0 0x1000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "mclk", "hclk"; - clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>; - dmas = <&dmac1 1>; - dma-names = "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spdifm0_tx>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - dmac0: dma-controller@fe530000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xfe530000 0x0 0x4000>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_BUS>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - - dmac1: dma-controller@fe550000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xfe550000 0x0 0x4000>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_BUS>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - - i2c1: i2c@fe5a0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5a0000 0x0 0x1000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c1_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@fe5b0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5b0000 0x0 0x1000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c2m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@fe5c0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5c0000 0x0 0x1000>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c3m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c4: i2c@fe5d0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5d0000 0x0 0x1000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c4m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c5: i2c@fe5e0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5e0000 0x0 0x1000>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c5m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - wdt: watchdog@fe600000 { - compatible = "rockchip,rk3568-wdt", "snps,dw-wdt"; - reg = <0x0 0xfe600000 0x0 0x100>; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>; - clock-names = "tclk", "pclk"; - }; - - spi0: spi@fe610000 { - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xfe610000 0x0 0x1000>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>; - clock-names = "spiclk", "apb_pclk"; - dmas = <&dmac0 20>, <&dmac0 21>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@fe620000 { - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xfe620000 0x0 0x1000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>; - clock-names = "spiclk", "apb_pclk"; - dmas = <&dmac0 22>, <&dmac0 23>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1m0_cs0 &spi1m0_cs1 &spi1m0_pins>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@fe630000 { - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xfe630000 0x0 0x1000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>; - clock-names = "spiclk", "apb_pclk"; - dmas = <&dmac0 24>, <&dmac0 25>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2m0_cs0 &spi2m0_cs1 &spi2m0_pins>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi3: spi@fe640000 { - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xfe640000 0x0 0x1000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>; - clock-names = "spiclk", "apb_pclk"; - dmas = <&dmac0 26>, <&dmac0 27>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi3m0_cs0 &spi3m0_cs1 &spi3m0_pins>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart1: serial@fe650000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe650000 0x0 0x100>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 2>, <&dmac0 3>; - pinctrl-0 = <&uart1m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart2: serial@fe660000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe660000 0x0 0x100>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 4>, <&dmac0 5>; - pinctrl-0 = <&uart2m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart3: serial@fe670000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe670000 0x0 0x100>; - interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 6>, <&dmac0 7>; - pinctrl-0 = <&uart3m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart4: serial@fe680000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe680000 0x0 0x100>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 8>, <&dmac0 9>; - pinctrl-0 = <&uart4m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart5: serial@fe690000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe690000 0x0 0x100>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 10>, <&dmac0 11>; - pinctrl-0 = <&uart5m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart6: serial@fe6a0000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe6a0000 0x0 0x100>; - interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 12>, <&dmac0 13>; - pinctrl-0 = <&uart6m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart7: serial@fe6b0000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe6b0000 0x0 0x100>; - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 14>, <&dmac0 15>; - pinctrl-0 = <&uart7m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart8: serial@fe6c0000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe6c0000 0x0 0x100>; - interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 16>, <&dmac0 17>; - pinctrl-0 = <&uart8m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart9: serial@fe6d0000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe6d0000 0x0 0x100>; - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 18>, <&dmac0 19>; - pinctrl-0 = <&uart9m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - thermal_zones: thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <100>; - polling-delay = <1000>; - - thermal-sensors = <&tsadc 0>; - - trips { - cpu_alert0: cpu_alert0 { - temperature = <70000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_alert1: cpu_alert1 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - gpu_thermal: gpu-thermal { - polling-delay-passive = <20>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ - - thermal-sensors = <&tsadc 1>; - - trips { - gpu_threshold: gpu-threshold { - temperature = <70000>; - hysteresis = <2000>; - type = "passive"; - }; - gpu_target: gpu-target { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - gpu_crit: gpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&gpu_target>; - cooling-device = - <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - tsadc: tsadc@fe710000 { - compatible = "rockchip,rk3568-tsadc"; - reg = <0x0 0xfe710000 0x0 0x100>; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; - assigned-clocks = <&cru CLK_TSADC_TSEN>, <&cru CLK_TSADC>; - assigned-clock-rates = <17000000>, <700000>; - clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; - clock-names = "tsadc", "apb_pclk"; - resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>, - <&cru SRST_TSADCPHY>; - rockchip,grf = <&grf>; - rockchip,hw-tshut-temp = <95000>; - pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&tsadc_pin>; - pinctrl-1 = <&tsadc_shutorg>; - pinctrl-2 = <&tsadc_pin>; - #thermal-sensor-cells = <1>; - status = "disabled"; - }; - - saradc: saradc@fe720000 { - compatible = "rockchip,rk3568-saradc", "rockchip,rk3399-saradc"; - reg = <0x0 0xfe720000 0x0 0x100>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; - clock-names = "saradc", "apb_pclk"; - resets = <&cru SRST_P_SARADC>; - reset-names = "saradc-apb"; - #io-channel-cells = <1>; - status = "disabled"; - }; - - pwm4: pwm@fe6e0000 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfe6e0000 0x0 0x10>; - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm4_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm5: pwm@fe6e0010 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfe6e0010 0x0 0x10>; - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm5_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm6: pwm@fe6e0020 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfe6e0020 0x0 0x10>; - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm6_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm7: pwm@fe6e0030 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfe6e0030 0x0 0x10>; - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm7_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm8: pwm@fe6f0000 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfe6f0000 0x0 0x10>; - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm8m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm9: pwm@fe6f0010 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfe6f0010 0x0 0x10>; - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm9m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm10: pwm@fe6f0020 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfe6f0020 0x0 0x10>; - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm10m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm11: pwm@fe6f0030 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfe6f0030 0x0 0x10>; - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm11m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm12: pwm@fe700000 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfe700000 0x0 0x10>; - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm12m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm13: pwm@fe700010 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfe700010 0x0 0x10>; - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm13m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm14: pwm@fe700020 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfe700020 0x0 0x10>; - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm14m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm15: pwm@fe700030 { - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfe700030 0x0 0x10>; - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm15m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - combphy1: phy@fe830000 { - compatible = "rockchip,rk3568-naneng-combphy"; - reg = <0x0 0xfe830000 0x0 0x100>; - clocks = <&pmucru CLK_PCIEPHY1_REF>, - <&cru PCLK_PIPEPHY1>, - <&cru PCLK_PIPE>; - clock-names = "ref", "apb", "pipe"; - assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>; - assigned-clock-rates = <100000000>; - resets = <&cru SRST_PIPEPHY1>; - rockchip,pipe-grf = <&pipegrf>; - rockchip,pipe-phy-grf = <&pipe_phy_grf1>; - #phy-cells = <1>; - status = "disabled"; - }; - - combphy2: phy@fe840000 { - compatible = "rockchip,rk3568-naneng-combphy"; - reg = <0x0 0xfe840000 0x0 0x100>; - clocks = <&pmucru CLK_PCIEPHY2_REF>, - <&cru PCLK_PIPEPHY2>, - <&cru PCLK_PIPE>; - clock-names = "ref", "apb", "pipe"; - assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>; - assigned-clock-rates = <100000000>; - resets = <&cru SRST_PIPEPHY2>; - rockchip,pipe-grf = <&pipegrf>; - rockchip,pipe-phy-grf = <&pipe_phy_grf2>; - #phy-cells = <1>; - status = "disabled"; - }; - - csi_dphy: phy@fe870000 { - compatible = "rockchip,rk3568-csi-dphy"; - reg = <0x0 0xfe870000 0x0 0x10000>; - clocks = <&cru PCLK_MIPICSIPHY>; - clock-names = "pclk"; - #phy-cells = <0>; - resets = <&cru SRST_P_MIPICSIPHY>; - reset-names = "apb"; - rockchip,grf = <&grf>; - status = "disabled"; - }; - - dsi_dphy0: mipi-dphy@fe850000 { - compatible = "rockchip,rk3568-dsi-dphy"; - reg = <0x0 0xfe850000 0x0 0x10000>; - clock-names = "ref", "pclk"; - clocks = <&pmucru CLK_MIPIDSIPHY0_REF>, <&cru PCLK_MIPIDSIPHY0>; - #phy-cells = <0>; - power-domains = <&power RK3568_PD_VO>; - reset-names = "apb"; - resets = <&cru SRST_P_MIPIDSIPHY0>; - status = "disabled"; - }; - - dsi_dphy1: mipi-dphy@fe860000 { - compatible = "rockchip,rk3568-dsi-dphy"; - reg = <0x0 0xfe860000 0x0 0x10000>; - clock-names = "ref", "pclk"; - clocks = <&pmucru CLK_MIPIDSIPHY1_REF>, <&cru PCLK_MIPIDSIPHY1>; - #phy-cells = <0>; - power-domains = <&power RK3568_PD_VO>; - reset-names = "apb"; - resets = <&cru SRST_P_MIPIDSIPHY1>; - status = "disabled"; - }; - - usb2phy0: usb2phy@fe8a0000 { - compatible = "rockchip,rk3568-usb2phy"; - reg = <0x0 0xfe8a0000 0x0 0x10000>; - clocks = <&pmucru CLK_USBPHY0_REF>; - clock-names = "phyclk"; - clock-output-names = "clk_usbphy0_480m"; - interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; - rockchip,usbgrf = <&usb2phy0_grf>; - #clock-cells = <0>; - status = "disabled"; - - usb2phy0_host: host-port { - #phy-cells = <0>; - status = "disabled"; - }; - - usb2phy0_otg: otg-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - - usb2phy1: usb2phy@fe8b0000 { - compatible = "rockchip,rk3568-usb2phy"; - reg = <0x0 0xfe8b0000 0x0 0x10000>; - clocks = <&pmucru CLK_USBPHY1_REF>; - clock-names = "phyclk"; - clock-output-names = "clk_usbphy1_480m"; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - rockchip,usbgrf = <&usb2phy1_grf>; - #clock-cells = <0>; - status = "disabled"; - - usb2phy1_host: host-port { - #phy-cells = <0>; - status = "disabled"; - }; - - usb2phy1_otg: otg-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - - pinctrl: pinctrl { - compatible = "rockchip,rk3568-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmugrf>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio0: gpio@fdd60000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfdd60000 0x0 0x100>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; - gpio-controller; - gpio-ranges = <&pinctrl 0 0 32>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio@fe740000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfe740000 0x0 0x100>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; - gpio-controller; - gpio-ranges = <&pinctrl 0 32 32>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@fe750000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfe750000 0x0 0x100>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; - gpio-controller; - gpio-ranges = <&pinctrl 0 64 32>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@fe760000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfe760000 0x0 0x100>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; - gpio-controller; - gpio-ranges = <&pinctrl 0 96 32>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@fe770000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfe770000 0x0 0x100>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; - gpio-controller; - gpio-ranges = <&pinctrl 0 128 32>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; -}; - -#include "rk3568-pinctrl.dtsi" diff --git a/include/dt-bindings/clock/rk3568-cru.h b/include/dt-bindings/clock/rk3568-cru.h deleted file mode 100644 index d29890865150..000000000000 --- a/include/dt-bindings/clock/rk3568-cru.h +++ /dev/null @@ -1,926 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2021 Rockchip Electronics Co. Ltd. - * Author: Elaine Zhang <zhangqing@rock-chips.com> - */ - -#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3568_H -#define _DT_BINDINGS_CLK_ROCKCHIP_RK3568_H - -/* pmucru-clocks indices */ - -/* pmucru plls */ -#define PLL_PPLL 1 -#define PLL_HPLL 2 - -/* pmucru clocks */ -#define XIN_OSC0_DIV 4 -#define CLK_RTC_32K 5 -#define CLK_PMU 6 -#define CLK_I2C0 7 -#define CLK_RTC32K_FRAC 8 -#define CLK_UART0_DIV 9 -#define CLK_UART0_FRAC 10 -#define SCLK_UART0 11 -#define DBCLK_GPIO0 12 -#define CLK_PWM0 13 -#define CLK_CAPTURE_PWM0_NDFT 14 -#define CLK_PMUPVTM 15 -#define CLK_CORE_PMUPVTM 16 -#define CLK_REF24M 17 -#define XIN_OSC0_USBPHY0_G 18 -#define CLK_USBPHY0_REF 19 -#define XIN_OSC0_USBPHY1_G 20 -#define CLK_USBPHY1_REF 21 -#define XIN_OSC0_MIPIDSIPHY0_G 22 -#define CLK_MIPIDSIPHY0_REF 23 -#define XIN_OSC0_MIPIDSIPHY1_G 24 -#define CLK_MIPIDSIPHY1_REF 25 -#define CLK_WIFI_DIV 26 -#define CLK_WIFI_OSC0 27 -#define CLK_WIFI 28 -#define CLK_PCIEPHY0_DIV 29 -#define CLK_PCIEPHY0_OSC0 30 -#define CLK_PCIEPHY0_REF 31 -#define CLK_PCIEPHY1_DIV 32 -#define CLK_PCIEPHY1_OSC0 33 -#define CLK_PCIEPHY1_REF 34 -#define CLK_PCIEPHY2_DIV 35 -#define CLK_PCIEPHY2_OSC0 36 -#define CLK_PCIEPHY2_REF 37 -#define CLK_PCIE30PHY_REF_M 38 -#define CLK_PCIE30PHY_REF_N 39 -#define CLK_HDMI_REF 40 -#define XIN_OSC0_EDPPHY_G 41 -#define PCLK_PDPMU 42 -#define PCLK_PMU 43 -#define PCLK_UART0 44 -#define PCLK_I2C0 45 -#define PCLK_GPIO0 46 -#define PCLK_PMUPVTM 47 -#define PCLK_PWM0 48 -#define CLK_PDPMU 49 -#define SCLK_32K_IOE 50 - -#define CLKPMU_NR_CLKS (SCLK_32K_IOE + 1) - -/* cru-clocks indices */ - -/* cru plls */ -#define PLL_APLL 1 -#define PLL_DPLL 2 -#define PLL_CPLL 3 -#define PLL_GPLL 4 -#define PLL_VPLL 5 -#define PLL_NPLL 6 - -/* cru clocks */ -#define CPLL_333M 9 -#define ARMCLK 10 -#define USB480M 11 -#define ACLK_CORE_NIU2BUS 18 -#define CLK_CORE_PVTM 19 -#define CLK_CORE_PVTM_CORE 20 -#define CLK_CORE_PVTPLL 21 -#define CLK_GPU_SRC 22 -#define CLK_GPU_PRE_NDFT 23 -#define CLK_GPU_PRE_MUX 24 -#define ACLK_GPU_PRE 25 -#define PCLK_GPU_PRE 26 -#define CLK_GPU 27 -#define CLK_GPU_NP5 28 -#define PCLK_GPU_PVTM 29 -#define CLK_GPU_PVTM 30 -#define CLK_GPU_PVTM_CORE 31 -#define CLK_GPU_PVTPLL 32 -#define CLK_NPU_SRC 33 -#define CLK_NPU_PRE_NDFT 34 -#define CLK_NPU 35 -#define CLK_NPU_NP5 36 -#define HCLK_NPU_PRE 37 -#define PCLK_NPU_PRE 38 -#define ACLK_NPU_PRE 39 -#define ACLK_NPU 40 -#define HCLK_NPU 41 -#define PCLK_NPU_PVTM 42 -#define CLK_NPU_PVTM 43 -#define CLK_NPU_PVTM_CORE 44 -#define CLK_NPU_PVTPLL 45 -#define CLK_DDRPHY1X_SRC 46 -#define CLK_DDRPHY1X_HWFFC_SRC 47 -#define CLK_DDR1X 48 -#define CLK_MSCH 49 -#define CLK24_DDRMON 50 -#define ACLK_GIC_AUDIO 51 -#define HCLK_GIC_AUDIO 52 -#define HCLK_SDMMC_BUFFER 53 -#define DCLK_SDMMC_BUFFER 54 -#define ACLK_GIC600 55 -#define ACLK_SPINLOCK 56 -#define HCLK_I2S0_8CH 57 -#define HCLK_I2S1_8CH 58 -#define HCLK_I2S2_2CH 59 -#define HCLK_I2S3_2CH 60 -#define CLK_I2S0_8CH_TX_SRC 61 -#define CLK_I2S0_8CH_TX_FRAC 62 -#define MCLK_I2S0_8CH_TX 63 -#define I2S0_MCLKOUT_TX 64 -#define CLK_I2S0_8CH_RX_SRC 65 -#define CLK_I2S0_8CH_RX_FRAC 66 -#define MCLK_I2S0_8CH_RX 67 -#define I2S0_MCLKOUT_RX 68 -#define CLK_I2S1_8CH_TX_SRC 69 -#define CLK_I2S1_8CH_TX_FRAC 70 -#define MCLK_I2S1_8CH_TX 71 -#define I2S1_MCLKOUT_TX 72 -#define CLK_I2S1_8CH_RX_SRC 73 -#define CLK_I2S1_8CH_RX_FRAC 74 -#define MCLK_I2S1_8CH_RX 75 -#define I2S1_MCLKOUT_RX 76 -#define CLK_I2S2_2CH_SRC 77 -#define CLK_I2S2_2CH_FRAC 78 -#define MCLK_I2S2_2CH 79 -#define I2S2_MCLKOUT 80 -#define CLK_I2S3_2CH_TX_SRC 81 -#define CLK_I2S3_2CH_TX_FRAC 82 -#define MCLK_I2S3_2CH_TX 83 -#define I2S3_MCLKOUT_TX 84 -#define CLK_I2S3_2CH_RX_SRC 85 -#define CLK_I2S3_2CH_RX_FRAC 86 -#define MCLK_I2S3_2CH_RX 87 -#define I2S3_MCLKOUT_RX 88 -#define HCLK_PDM 89 -#define MCLK_PDM 90 -#define HCLK_VAD 91 -#define HCLK_SPDIF_8CH 92 -#define MCLK_SPDIF_8CH_SRC 93 -#define MCLK_SPDIF_8CH_FRAC 94 -#define MCLK_SPDIF_8CH 95 -#define HCLK_AUDPWM 96 -#define SCLK_AUDPWM_SRC 97 -#define SCLK_AUDPWM_FRAC 98 -#define SCLK_AUDPWM 99 -#define HCLK_ACDCDIG 100 -#define CLK_ACDCDIG_I2C 101 -#define CLK_ACDCDIG_DAC 102 -#define CLK_ACDCDIG_ADC 103 -#define ACLK_SECURE_FLASH 104 -#define HCLK_SECURE_FLASH 105 -#define ACLK_CRYPTO_NS 106 -#define HCLK_CRYPTO_NS 107 -#define CLK_CRYPTO_NS_CORE 108 -#define CLK_CRYPTO_NS_PKA 109 -#define CLK_CRYPTO_NS_RNG 110 -#define HCLK_TRNG_NS 111 -#define CLK_TRNG_NS 112 -#define PCLK_OTPC_NS 113 -#define CLK_OTPC_NS_SBPI 114 -#define CLK_OTPC_NS_USR 115 -#define HCLK_NANDC 116 -#define NCLK_NANDC 117 -#define HCLK_SFC 118 -#define HCLK_SFC_XIP 119 -#define SCLK_SFC 120 -#define ACLK_EMMC 121 -#define HCLK_EMMC 122 -#define BCLK_EMMC 123 -#define CCLK_EMMC 124 -#define TCLK_EMMC 125 -#define ACLK_PIPE 126 -#define PCLK_PIPE 127 -#define PCLK_PIPE_GRF 128 -#define ACLK_PCIE20_MST 129 -#define ACLK_PCIE20_SLV 130 -#define ACLK_PCIE20_DBI 131 -#define PCLK_PCIE20 132 -#define CLK_PCIE20_AUX_NDFT 133 -#define CLK_PCIE20_AUX_DFT 134 -#define CLK_PCIE20_PIPE_DFT 135 -#define ACLK_PCIE30X1_MST 136 -#define ACLK_PCIE30X1_SLV 137 -#define ACLK_PCIE30X1_DBI 138 -#define PCLK_PCIE30X1 139 -#define CLK_PCIE30X1_AUX_NDFT 140 -#define CLK_PCIE30X1_AUX_DFT 141 -#define CLK_PCIE30X1_PIPE_DFT 142 -#define ACLK_PCIE30X2_MST 143 -#define ACLK_PCIE30X2_SLV 144 -#define ACLK_PCIE30X2_DBI 145 -#define PCLK_PCIE30X2 146 -#define CLK_PCIE30X2_AUX_NDFT 147 -#define CLK_PCIE30X2_AUX_DFT 148 -#define CLK_PCIE30X2_PIPE_DFT 149 -#define ACLK_SATA0 150 -#define CLK_SATA0_PMALIVE 151 -#define CLK_SATA0_RXOOB 152 -#define CLK_SATA0_PIPE_NDFT 153 -#define CLK_SATA0_PIPE_DFT 154 -#define ACLK_SATA1 155 -#define CLK_SATA1_PMALIVE 156 -#define CLK_SATA1_RXOOB 157 -#define CLK_SATA1_PIPE_NDFT 158 -#define CLK_SATA1_PIPE_DFT 159 -#define ACLK_SATA2 160 -#define CLK_SATA2_PMALIVE 161 -#define CLK_SATA2_RXOOB 162 -#define CLK_SATA2_PIPE_NDFT 163 -#define CLK_SATA2_PIPE_DFT 164 -#define ACLK_USB3OTG0 165 -#define CLK_USB3OTG0_REF 166 -#define CLK_USB3OTG0_SUSPEND 167 -#define ACLK_USB3OTG1 168 -#define CLK_USB3OTG1_REF 169 -#define CLK_USB3OTG1_SUSPEND 170 -#define CLK_XPCS_EEE 171 -#define PCLK_XPCS 172 -#define ACLK_PHP 173 -#define HCLK_PHP 174 -#define PCLK_PHP 175 -#define HCLK_SDMMC0 176 -#define CLK_SDMMC0 177 -#define HCLK_SDMMC1 178 -#define CLK_SDMMC1 179 -#define ACLK_GMAC0 180 -#define PCLK_GMAC0 181 -#define CLK_MAC0_2TOP 182 -#define CLK_MAC0_OUT 183 -#define CLK_MAC0_REFOUT 184 -#define CLK_GMAC0_PTP_REF 185 -#define ACLK_USB 186 -#define HCLK_USB 187 -#define PCLK_USB 188 -#define HCLK_USB2HOST0 189 -#define HCLK_USB2HOST0_ARB 190 -#define HCLK_USB2HOST1 191 -#define HCLK_USB2HOST1_ARB 192 -#define HCLK_SDMMC2 193 -#define CLK_SDMMC2 194 -#define ACLK_GMAC1 195 -#define PCLK_GMAC1 196 -#define CLK_MAC1_2TOP 197 -#define CLK_MAC1_OUT 198 -#define CLK_MAC1_REFOUT 199 -#define CLK_GMAC1_PTP_REF 200 -#define ACLK_PERIMID 201 -#define HCLK_PERIMID 202 -#define ACLK_VI 203 -#define HCLK_VI 204 -#define PCLK_VI 205 -#define ACLK_VICAP 206 -#define HCLK_VICAP 207 -#define DCLK_VICAP 208 -#define ICLK_VICAP_G 209 -#define ACLK_ISP 210 -#define HCLK_ISP 211 -#define CLK_ISP 212 -#define PCLK_CSI2HOST1 213 -#define CLK_CIF_OUT 214 -#define CLK_CAM0_OUT 215 -#define CLK_CAM1_OUT 216 -#define ACLK_VO 217 -#define HCLK_VO 218 -#define PCLK_VO 219 -#define ACLK_VOP_PRE 220 -#define ACLK_VOP 221 -#define HCLK_VOP 222 -#define DCLK_VOP0 223 -#define DCLK_VOP1 224 -#define DCLK_VOP2 225 -#define CLK_VOP_PWM 226 -#define ACLK_HDCP 227 -#define HCLK_HDCP 228 -#define PCLK_HDCP 229 -#define PCLK_HDMI_HOST 230 -#define CLK_HDMI_SFR 231 -#define PCLK_DSITX_0 232 -#define PCLK_DSITX_1 233 -#define PCLK_EDP_CTRL 234 -#define CLK_EDP_200M 235 -#define ACLK_VPU_PRE 236 -#define HCLK_VPU_PRE 237 -#define ACLK_VPU 238 -#define HCLK_VPU 239 -#define ACLK_RGA_PRE 240 -#define HCLK_RGA_PRE 241 -#define PCLK_RGA_PRE 242 -#define ACLK_RGA 243 -#define HCLK_RGA 244 -#define CLK_RGA_CORE 245 -#define ACLK_IEP 246 -#define HCLK_IEP 247 -#define CLK_IEP_CORE 248 -#define HCLK_EBC 249 -#define DCLK_EBC 250 -#define ACLK_JDEC 251 -#define HCLK_JDEC 252 -#define ACLK_JENC 253 -#define HCLK_JENC 254 -#define PCLK_EINK 255 -#define HCLK_EINK 256 -#define ACLK_RKVENC_PRE 257 -#define HCLK_RKVENC_PRE 258 -#define ACLK_RKVENC 259 -#define HCLK_RKVENC 260 -#define CLK_RKVENC_CORE 261 -#define ACLK_RKVDEC_PRE 262 -#define HCLK_RKVDEC_PRE 263 -#define ACLK_RKVDEC 264 -#define HCLK_RKVDEC 265 -#define CLK_RKVDEC_CA 266 -#define CLK_RKVDEC_CORE 267 -#define CLK_RKVDEC_HEVC_CA 268 -#define ACLK_BUS 269 -#define PCLK_BUS 270 -#define PCLK_TSADC 271 -#define CLK_TSADC_TSEN 272 -#define CLK_TSADC 273 -#define PCLK_SARADC 274 -#define CLK_SARADC 275 -#define PCLK_SCR 276 -#define PCLK_WDT_NS 277 -#define TCLK_WDT_NS 278 -#define ACLK_DMAC0 279 -#define ACLK_DMAC1 280 -#define ACLK_MCU 281 -#define PCLK_INTMUX 282 -#define PCLK_MAILBOX 283 -#define PCLK_UART1 284 -#define CLK_UART1_SRC 285 -#define CLK_UART1_FRAC 286 -#define SCLK_UART1 287 -#define PCLK_UART2 288 -#define CLK_UART2_SRC 289 -#define CLK_UART2_FRAC 290 -#define SCLK_UART2 291 -#define PCLK_UART3 292 -#define CLK_UART3_SRC 293 -#define CLK_UART3_FRAC 294 -#define SCLK_UART3 295 -#define PCLK_UART4 296 -#define CLK_UART4_SRC 297 -#define CLK_UART4_FRAC 298 -#define SCLK_UART4 299 -#define PCLK_UART5 300 -#define CLK_UART5_SRC 301 -#define CLK_UART5_FRAC 302 -#define SCLK_UART5 303 -#define PCLK_UART6 304 -#define CLK_UART6_SRC 305 -#define CLK_UART6_FRAC 306 -#define SCLK_UART6 307 -#define PCLK_UART7 308 -#define CLK_UART7_SRC 309 -#define CLK_UART7_FRAC 310 -#define SCLK_UART7 311 -#define PCLK_UART8 312 -#define CLK_UART8_SRC 313 -#define CLK_UART8_FRAC 314 -#define SCLK_UART8 315 -#define PCLK_UART9 316 -#define CLK_UART9_SRC 317 -#define CLK_UART9_FRAC 318 -#define SCLK_UART9 319 -#define PCLK_CAN0 320 -#define CLK_CAN0 321 -#define PCLK_CAN1 322 -#define CLK_CAN1 323 -#define PCLK_CAN2 324 -#define CLK_CAN2 325 -#define CLK_I2C 326 -#define PCLK_I2C1 327 -#define CLK_I2C1 328 -#define PCLK_I2C2 329 -#define CLK_I2C2 330 -#define PCLK_I2C3 331 -#define CLK_I2C3 332 -#define PCLK_I2C4 333 -#define CLK_I2C4 334 -#define PCLK_I2C5 335 -#define CLK_I2C5 336 -#define PCLK_SPI0 337 -#define CLK_SPI0 338 -#define PCLK_SPI1 339 -#define CLK_SPI1 340 -#define PCLK_SPI2 341 -#define CLK_SPI2 342 -#define PCLK_SPI3 343 -#define CLK_SPI3 344 -#define PCLK_PWM1 345 -#define CLK_PWM1 346 -#define CLK_PWM1_CAPTURE 347 -#define PCLK_PWM2 348 -#define CLK_PWM2 349 -#define CLK_PWM2_CAPTURE 350 -#define PCLK_PWM3 351 -#define CLK_PWM3 352 -#define CLK_PWM3_CAPTURE 353 -#define DBCLK_GPIO 354 -#define PCLK_GPIO1 355 -#define DBCLK_GPIO1 356 -#define PCLK_GPIO2 357 -#define DBCLK_GPIO2 358 -#define PCLK_GPIO3 359 -#define DBCLK_GPIO3 360 -#define PCLK_GPIO4 361 -#define DBCLK_GPIO4 362 -#define OCC_SCAN_CLK_GPIO 363 -#define PCLK_TIMER 364 -#define CLK_TIMER0 365 -#define CLK_TIMER1 366 -#define CLK_TIMER2 367 -#define CLK_TIMER3 368 -#define CLK_TIMER4 369 -#define CLK_TIMER5 370 -#define ACLK_TOP_HIGH 371 -#define ACLK_TOP_LOW 372 -#define HCLK_TOP 373 -#define PCLK_TOP 374 -#define PCLK_PCIE30PHY 375 -#define CLK_OPTC_ARB 376 -#define PCLK_MIPICSIPHY 377 -#define PCLK_MIPIDSIPHY0 378 -#define PCLK_MIPIDSIPHY1 379 -#define PCLK_PIPEPHY0 380 -#define PCLK_PIPEPHY1 381 -#define PCLK_PIPEPHY2 382 -#define PCLK_CPU_BOOST 383 -#define CLK_CPU_BOOST 384 -#define PCLK_OTPPHY 385 -#define SCLK_GMAC0 386 -#define SCLK_GMAC0_RGMII_SPEED 387 -#define SCLK_GMAC0_RMII_SPEED 388 -#define SCLK_GMAC0_RX_TX 389 -#define SCLK_GMAC1 390 -#define SCLK_GMAC1_RGMII_SPEED 391 -#define SCLK_GMAC1_RMII_SPEED 392 -#define SCLK_GMAC1_RX_TX 393 -#define SCLK_SDMMC0_DRV 394 -#define SCLK_SDMMC0_SAMPLE 395 -#define SCLK_SDMMC1_DRV 396 -#define SCLK_SDMMC1_SAMPLE 397 -#define SCLK_SDMMC2_DRV 398 -#define SCLK_SDMMC2_SAMPLE 399 -#define SCLK_EMMC_DRV 400 -#define SCLK_EMMC_SAMPLE 401 -#define PCLK_EDPPHY_GRF 402 -#define CLK_HDMI_CEC 403 -#define CLK_I2S0_8CH_TX 404 -#define CLK_I2S0_8CH_RX 405 -#define CLK_I2S1_8CH_TX 406 -#define CLK_I2S1_8CH_RX 407 -#define CLK_I2S2_2CH 408 -#define CLK_I2S3_2CH_TX 409 -#define CLK_I2S3_2CH_RX 410 -#define CPLL_500M 411 -#define CPLL_250M 412 -#define CPLL_125M 413 -#define CPLL_62P5M 414 -#define CPLL_50M 415 -#define CPLL_25M 416 -#define CPLL_100M 417 -#define SCLK_DDRCLK 418 - -#define PCLK_CORE_PVTM 450 - -#define CLK_NR_CLKS (PCLK_CORE_PVTM + 1) - -/* pmu soft-reset indices */ -/* pmucru_softrst_con0 */ -#define SRST_P_PDPMU_NIU 0 -#define SRST_P_PMUCRU 1 -#define SRST_P_PMUGRF 2 -#define SRST_P_I2C0 3 -#define SRST_I2C0 4 -#define SRST_P_UART0 5 -#define SRST_S_UART0 6 -#define SRST_P_PWM0 7 -#define SRST_PWM0 8 -#define SRST_P_GPIO0 9 -#define SRST_GPIO0 10 -#define SRST_P_PMUPVTM 11 -#define SRST_PMUPVTM 12 - -/* soft-reset indices */ - -/* cru_softrst_con0 */ -#define SRST_NCORERESET0 0 -#define SRST_NCORERESET1 1 -#define SRST_NCORERESET2 2 -#define SRST_NCORERESET3 3 -#define SRST_NCPUPORESET0 4 -#define SRST_NCPUPORESET1 5 -#define SRST_NCPUPORESET2 6 -#define SRST_NCPUPORESET3 7 -#define SRST_NSRESET 8 -#define SRST_NSPORESET 9 -#define SRST_NATRESET 10 -#define SRST_NGICRESET 11 -#define SRST_NPRESET 12 -#define SRST_NPERIPHRESET 13 - -/* cru_softrst_con1 */ -#define SRST_A_CORE_NIU2DDR 16 -#define SRST_A_CORE_NIU2BUS 17 -#define SRST_P_DBG_NIU 18 -#define SRST_P_DBG 19 -#define SRST_P_DBG_DAPLITE 20 -#define SRST_DAP 21 -#define SRST_A_ADB400_CORE2GIC 22 -#define SRST_A_ADB400_GIC2CORE 23 -#define SRST_P_CORE_GRF 24 -#define SRST_P_CORE_PVTM 25 -#define SRST_CORE_PVTM 26 -#define SRST_CORE_PVTPLL 27 - -/* cru_softrst_con2 */ -#define SRST_GPU 32 -#define SRST_A_GPU_NIU 33 -#define SRST_P_GPU_NIU 34 -#define SRST_P_GPU_PVTM 35 -#define SRST_GPU_PVTM 36 -#define SRST_GPU_PVTPLL 37 -#define SRST_A_NPU_NIU 40 -#define SRST_H_NPU_NIU 41 -#define SRST_P_NPU_NIU 42 -#define SRST_A_NPU 43 -#define SRST_H_NPU 44 -#define SRST_P_NPU_PVTM 45 -#define SRST_NPU_PVTM 46 -#define SRST_NPU_PVTPLL 47 - -/* cru_softrst_con3 */ -#define SRST_A_MSCH 51 -#define SRST_HWFFC_CTRL 52 -#define SRST_DDR_ALWAYSON 53 -#define SRST_A_DDRSPLIT 54 -#define SRST_DDRDFI_CTL 55 -#define SRST_A_DMA2DDR 57 - -/* cru_softrst_con4 */ -#define SRST_A_PERIMID_NIU 64 -#define SRST_H_PERIMID_NIU 65 -#define SRST_A_GIC_AUDIO_NIU 66 -#define SRST_H_GIC_AUDIO_NIU 67 -#define SRST_A_GIC600 68 -#define SRST_A_GIC600_DEBUG 69 -#define SRST_A_GICADB_CORE2GIC 70 -#define SRST_A_GICADB_GIC2CORE 71 -#define SRST_A_SPINLOCK 72 -#define SRST_H_SDMMC_BUFFER 73 -#define SRST_D_SDMMC_BUFFER 74 -#define SRST_H_I2S0_8CH 75 -#define SRST_H_I2S1_8CH 76 -#define SRST_H_I2S2_2CH 77 -#define SRST_H_I2S3_2CH 78 - -/* cru_softrst_con5 */ -#define SRST_M_I2S0_8CH_TX 80 -#define SRST_M_I2S0_8CH_RX 81 -#define SRST_M_I2S1_8CH_TX 82 -#define SRST_M_I2S1_8CH_RX 83 -#define SRST_M_I2S2_2CH 84 -#define SRST_M_I2S3_2CH_TX 85 -#define SRST_M_I2S3_2CH_RX 86 -#define SRST_H_PDM 87 -#define SRST_M_PDM 88 -#define SRST_H_VAD 89 -#define SRST_H_SPDIF_8CH 90 -#define SRST_M_SPDIF_8CH 91 -#define SRST_H_AUDPWM 92 -#define SRST_S_AUDPWM 93 -#define SRST_H_ACDCDIG 94 -#define SRST_ACDCDIG 95 - -/* cru_softrst_con6 */ -#define SRST_A_SECURE_FLASH_NIU 96 -#define SRST_H_SECURE_FLASH_NIU 97 -#define SRST_A_CRYPTO_NS 103 -#define SRST_H_CRYPTO_NS 104 -#define SRST_CRYPTO_NS_CORE 105 -#define SRST_CRYPTO_NS_PKA 106 -#define SRST_CRYPTO_NS_RNG 107 -#define SRST_H_TRNG_NS 108 -#define SRST_TRNG_NS 109 - -/* cru_softrst_con7 */ -#define SRST_H_NANDC 112 -#define SRST_N_NANDC 113 -#define SRST_H_SFC 114 -#define SRST_H_SFC_XIP 115 -#define SRST_S_SFC 116 -#define SRST_A_EMMC 117 -#define SRST_H_EMMC 118 -#define SRST_B_EMMC 119 -#define SRST_C_EMMC 120 -#define SRST_T_EMMC 121 - -/* cru_softrst_con8 */ -#define SRST_A_PIPE_NIU 128 -#define SRST_P_PIPE_NIU 130 -#define SRST_P_PIPE_GRF 133 -#define SRST_A_SATA0 134 -#define SRST_SATA0_PIPE 135 -#define SRST_SATA0_PMALIVE 136 -#define SRST_SATA0_RXOOB 137 -#define SRST_A_SATA1 138 -#define SRST_SATA1_PIPE 139 -#define SRST_SATA1_PMALIVE 140 -#define SRST_SATA1_RXOOB 141 - -/* cru_softrst_con9 */ -#define SRST_A_SATA2 144 -#define SRST_SATA2_PIPE 145 -#define SRST_SATA2_PMALIVE 146 -#define SRST_SATA2_RXOOB 147 -#define SRST_USB3OTG0 148 -#define SRST_USB3OTG1 149 -#define SRST_XPCS 150 -#define SRST_XPCS_TX_DIV10 151 -#define SRST_XPCS_RX_DIV10 152 -#define SRST_XPCS_XGXS_RX 153 - -/* cru_softrst_con10 */ -#define SRST_P_PCIE20 160 -#define SRST_PCIE20_POWERUP 161 -#define SRST_MSTR_ARESET_PCIE20 162 -#define SRST_SLV_ARESET_PCIE20 163 -#define SRST_DBI_ARESET_PCIE20 164 -#define SRST_BRESET_PCIE20 165 -#define SRST_PERST_PCIE20 166 -#define SRST_CORE_RST_PCIE20 167 -#define SRST_NSTICKY_RST_PCIE20 168 -#define SRST_STICKY_RST_PCIE20 169 -#define SRST_PWR_RST_PCIE20 170 - -/* cru_softrst_con11 */ -#define SRST_P_PCIE30X1 176 -#define SRST_PCIE30X1_POWERUP 177 -#define SRST_M_ARESET_PCIE30X1 178 -#define SRST_S_ARESET_PCIE30X1 179 -#define SRST_D_ARESET_PCIE30X1 180 -#define SRST_BRESET_PCIE30X1 181 -#define SRST_PERST_PCIE30X1 182 -#define SRST_CORE_RST_PCIE30X1 183 -#define SRST_NSTC_RST_PCIE30X1 184 -#define SRST_STC_RST_PCIE30X1 185 -#define SRST_PWR_RST_PCIE30X1 186 - -/* cru_softrst_con12 */ -#define SRST_P_PCIE30X2 192 -#define SRST_PCIE30X2_POWERUP 193 -#define SRST_M_ARESET_PCIE30X2 194 -#define SRST_S_ARESET_PCIE30X2 195 -#define SRST_D_ARESET_PCIE30X2 196 -#define SRST_BRESET_PCIE30X2 197 -#define SRST_PERST_PCIE30X2 198 -#define SRST_CORE_RST_PCIE30X2 199 -#define SRST_NSTC_RST_PCIE30X2 200 -#define SRST_STC_RST_PCIE30X2 201 -#define SRST_PWR_RST_PCIE30X2 202 - -/* cru_softrst_con13 */ -#define SRST_A_PHP_NIU 208 -#define SRST_H_PHP_NIU 209 -#define SRST_P_PHP_NIU 210 -#define SRST_H_SDMMC0 211 -#define SRST_SDMMC0 212 -#define SRST_H_SDMMC1 213 -#define SRST_SDMMC1 214 -#define SRST_A_GMAC0 215 -#define SRST_GMAC0_TIMESTAMP 216 - -/* cru_softrst_con14 */ -#define SRST_A_USB_NIU 224 -#define SRST_H_USB_NIU 225 -#define SRST_P_USB_NIU 226 -#define SRST_P_USB_GRF 227 -#define SRST_H_USB2HOST0 228 -#define SRST_H_USB2HOST0_ARB 229 -#define SRST_USB2HOST0_UTMI 230 -#define SRST_H_USB2HOST1 231 -#define SRST_H_USB2HOST1_ARB 232 -#define SRST_USB2HOST1_UTMI 233 -#define SRST_H_SDMMC2 234 -#define SRST_SDMMC2 235 -#define SRST_A_GMAC1 236 -#define SRST_GMAC1_TIMESTAMP 237 - -/* cru_softrst_con15 */ -#define SRST_A_VI_NIU 240 -#define SRST_H_VI_NIU 241 -#define SRST_P_VI_NIU 242 -#define SRST_A_VICAP 247 -#define SRST_H_VICAP 248 -#define SRST_D_VICAP 249 -#define SRST_I_VICAP 250 -#define SRST_P_VICAP 251 -#define SRST_H_ISP 252 -#define SRST_ISP 253 -#define SRST_P_CSI2HOST1 255 - -/* cru_softrst_con16 */ -#define SRST_A_VO_NIU 256 -#define SRST_H_VO_NIU 257 -#define SRST_P_VO_NIU 258 -#define SRST_A_VOP_NIU 259 -#define SRST_A_VOP 260 -#define SRST_H_VOP 261 -#define SRST_VOP0 262 -#define SRST_VOP1 263 -#define SRST_VOP2 264 -#define SRST_VOP_PWM 265 -#define SRST_A_HDCP 266 -#define SRST_H_HDCP 267 -#define SRST_P_HDCP 268 -#define SRST_P_HDMI_HOST 270 -#define SRST_HDMI_HOST 271 - -/* cru_softrst_con17 */ -#define SRST_P_DSITX_0 272 -#define SRST_P_DSITX_1 273 -#define SRST_P_EDP_CTRL 274 -#define SRST_EDP_24M 275 -#define SRST_A_VPU_NIU 280 -#define SRST_H_VPU_NIU 281 -#define SRST_A_VPU 282 -#define SRST_H_VPU 283 -#define SRST_H_EINK 286 -#define SRST_P_EINK 287 - -/* cru_softrst_con18 */ -#define SRST_A_RGA_NIU 288 -#define SRST_H_RGA_NIU 289 -#define SRST_P_RGA_NIU 290 -#define SRST_A_RGA 292 -#define SRST_H_RGA 293 -#define SRST_RGA_CORE 294 -#define SRST_A_IEP 295 -#define SRST_H_IEP 296 -#define SRST_IEP_CORE 297 -#define SRST_H_EBC 298 -#define SRST_D_EBC 299 -#define SRST_A_JDEC 300 -#define SRST_H_JDEC 301 -#define SRST_A_JENC 302 -#define SRST_H_JENC 303 - -/* cru_softrst_con19 */ -#define SRST_A_VENC_NIU 304 -#define SRST_H_VENC_NIU 305 -#define SRST_A_RKVENC 307 -#define SRST_H_RKVENC 308 -#define SRST_RKVENC_CORE 309 - -/* cru_softrst_con20 */ -#define SRST_A_RKVDEC_NIU 320 -#define SRST_H_RKVDEC_NIU 321 -#define SRST_A_RKVDEC 322 -#define SRST_H_RKVDEC 323 -#define SRST_RKVDEC_CA 324 -#define SRST_RKVDEC_CORE 325 -#define SRST_RKVDEC_HEVC_CA 326 - -/* cru_softrst_con21 */ -#define SRST_A_BUS_NIU 336 -#define SRST_P_BUS_NIU 338 -#define SRST_P_CAN0 340 -#define SRST_CAN0 341 -#define SRST_P_CAN1 342 -#define SRST_CAN1 343 -#define SRST_P_CAN2 344 -#define SRST_CAN2 345 -#define SRST_P_GPIO1 346 -#define SRST_GPIO1 347 -#define SRST_P_GPIO2 348 -#define SRST_GPIO2 349 -#define SRST_P_GPIO3 350 -#define SRST_GPIO3 351 - -/* cru_softrst_con22 */ -#define SRST_P_GPIO4 352 -#define SRST_GPIO4 353 -#define SRST_P_I2C1 354 -#define SRST_I2C1 355 -#define SRST_P_I2C2 356 -#define SRST_I2C2 357 -#define SRST_P_I2C3 358 -#define SRST_I2C3 359 -#define SRST_P_I2C4 360 -#define SRST_I2C4 361 -#define SRST_P_I2C5 362 -#define SRST_I2C5 363 -#define SRST_P_OTPC_NS 364 -#define SRST_OTPC_NS_SBPI 365 -#define SRST_OTPC_NS_USR 366 - -/* cru_softrst_con23 */ -#define SRST_P_PWM1 368 -#define SRST_PWM1 369 -#define SRST_P_PWM2 370 -#define SRST_PWM2 371 -#define SRST_P_PWM3 372 -#define SRST_PWM3 373 -#define SRST_P_SPI0 374 -#define SRST_SPI0 375 -#define SRST_P_SPI1 376 -#define SRST_SPI1 377 -#define SRST_P_SPI2 378 -#define SRST_SPI2 379 -#define SRST_P_SPI3 380 -#define SRST_SPI3 381 - -/* cru_softrst_con24 */ -#define SRST_P_SARADC 384 -#define SRST_P_TSADC 385 -#define SRST_TSADC 386 -#define SRST_P_TIMER 387 -#define SRST_TIMER0 388 -#define SRST_TIMER1 389 -#define SRST_TIMER2 390 -#define SRST_TIMER3 391 -#define SRST_TIMER4 392 -#define SRST_TIMER5 393 -#define SRST_P_UART1 394 -#define SRST_S_UART1 395 - -/* cru_softrst_con25 */ -#define SRST_P_UART2 400 -#define SRST_S_UART2 401 -#define SRST_P_UART3 402 -#define SRST_S_UART3 403 -#define SRST_P_UART4 404 -#define SRST_S_UART4 405 -#define SRST_P_UART5 406 -#define SRST_S_UART5 407 -#define SRST_P_UART6 408 -#define SRST_S_UART6 409 -#define SRST_P_UART7 410 -#define SRST_S_UART7 411 -#define SRST_P_UART8 412 -#define SRST_S_UART8 413 -#define SRST_P_UART9 414 -#define SRST_S_UART9 415 - -/* cru_softrst_con26 */ -#define SRST_P_GRF 416 -#define SRST_P_GRF_VCCIO12 417 -#define SRST_P_GRF_VCCIO34 418 -#define SRST_P_GRF_VCCIO567 419 -#define SRST_P_SCR 420 -#define SRST_P_WDT_NS 421 -#define SRST_T_WDT_NS 422 -#define SRST_P_DFT2APB 423 -#define SRST_A_MCU 426 -#define SRST_P_INTMUX 427 -#define SRST_P_MAILBOX 428 - -/* cru_softrst_con27 */ -#define SRST_A_TOP_HIGH_NIU 432 -#define SRST_A_TOP_LOW_NIU 433 -#define SRST_H_TOP_NIU 434 -#define SRST_P_TOP_NIU 435 -#define SRST_P_TOP_CRU 438 -#define SRST_P_DDRPHY 439 -#define SRST_DDRPHY 440 -#define SRST_P_MIPICSIPHY 442 -#define SRST_P_MIPIDSIPHY0 443 -#define SRST_P_MIPIDSIPHY1 444 -#define SRST_P_PCIE30PHY 445 -#define SRST_PCIE30PHY 446 -#define SRST_P_PCIE30PHY_GRF 447 - -/* cru_softrst_con28 */ -#define SRST_P_APB2ASB_LEFT 448 -#define SRST_P_APB2ASB_BOTTOM 449 -#define SRST_P_ASB2APB_LEFT 450 -#define SRST_P_ASB2APB_BOTTOM 451 -#define SRST_P_PIPEPHY0 452 -#define SRST_PIPEPHY0 453 -#define SRST_P_PIPEPHY1 454 -#define SRST_PIPEPHY1 455 -#define SRST_P_PIPEPHY2 456 -#define SRST_PIPEPHY2 457 -#define SRST_P_USB2PHY0_GRF 458 -#define SRST_P_USB2PHY1_GRF 459 -#define SRST_P_CPU_BOOST 460 -#define SRST_CPU_BOOST 461 -#define SRST_P_OTPPHY 462 -#define SRST_OTPPHY 463 - -/* cru_softrst_con29 */ -#define SRST_USB2PHY0_POR 464 -#define SRST_USB2PHY0_USB3OTG0 465 -#define SRST_USB2PHY0_USB3OTG1 466 -#define SRST_USB2PHY1_POR 467 -#define SRST_USB2PHY1_USB2HOST0 468 -#define SRST_USB2PHY1_USB2HOST1 469 -#define SRST_P_EDPPHY_GRF 470 -#define SRST_TSADCPHY 471 -#define SRST_GMAC0_DELAYLINE 472 -#define SRST_GMAC1_DELAYLINE 473 -#define SRST_OTPC_ARB 474 -#define SRST_P_PIPEPHY0_GRF 475 -#define SRST_P_PIPEPHY1_GRF 476 -#define SRST_P_PIPEPHY2_GRF 477 - -#endif diff --git a/include/dt-bindings/power/rk3568-power.h b/include/dt-bindings/power/rk3568-power.h deleted file mode 100644 index 6cc1af1a9d26..000000000000 --- a/include/dt-bindings/power/rk3568-power.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __DT_BINDINGS_POWER_RK3568_POWER_H__ -#define __DT_BINDINGS_POWER_RK3568_POWER_H__ - -/* VD_CORE */ -#define RK3568_PD_CPU_0 0 -#define RK3568_PD_CPU_1 1 -#define RK3568_PD_CPU_2 2 -#define RK3568_PD_CPU_3 3 -#define RK3568_PD_CORE_ALIVE 4 - -/* VD_PMU */ -#define RK3568_PD_PMU 5 - -/* VD_NPU */ -#define RK3568_PD_NPU 6 - -/* VD_GPU */ -#define RK3568_PD_GPU 7 - -/* VD_LOGIC */ -#define RK3568_PD_VI 8 -#define RK3568_PD_VO 9 -#define RK3568_PD_RGA 10 -#define RK3568_PD_VPU 11 -#define RK3568_PD_CENTER 12 -#define RK3568_PD_RKVDEC 13 -#define RK3568_PD_RKVENC 14 -#define RK3568_PD_PIPE 15 -#define RK3568_PD_LOGIC_ALIVE 16 - -#endif
Remove redundant device tree files now that RK356x boards have been migrated to use OF_UPSTREAM. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- arch/arm/dts/rk3566-anbernic-rgxx3.dtsi | 788 ------ arch/arm/dts/rk3566-quartz64-a.dts | 838 ------ arch/arm/dts/rk3566-quartz64-b.dts | 737 ----- arch/arm/dts/rk3566-radxa-cm3-io.dts | 281 -- arch/arm/dts/rk3566-radxa-cm3.dtsi | 425 --- arch/arm/dts/rk3566-soquartz-blade.dts | 198 -- arch/arm/dts/rk3566-soquartz-cm4.dts | 196 -- arch/arm/dts/rk3566-soquartz-model-a.dts | 236 -- arch/arm/dts/rk3566-soquartz.dtsi | 684 ----- arch/arm/dts/rk3566.dtsi | 35 - arch/arm/dts/rk3568-bpi-r2-pro.dts | 852 ------ arch/arm/dts/rk3568-evb.dts | 689 ----- arch/arm/dts/rk3568-lubancat-2.dts | 730 ----- arch/arm/dts/rk3568-nanopi-r5c.dts | 112 - arch/arm/dts/rk3568-nanopi-r5s.dts | 136 - arch/arm/dts/rk3568-nanopi-r5s.dtsi | 587 ---- arch/arm/dts/rk3568-odroid-m1.dts | 741 ----- arch/arm/dts/rk3568-pinctrl.dtsi | 3214 ---------------------- arch/arm/dts/rk3568-radxa-cm3i.dtsi | 412 --- arch/arm/dts/rk3568-radxa-e25.dts | 236 -- arch/arm/dts/rk3568-rock-3a.dts | 859 ------ arch/arm/dts/rk3568.dtsi | 267 -- arch/arm/dts/rk356x.dtsi | 1886 ------------- include/dt-bindings/clock/rk3568-cru.h | 926 ------- include/dt-bindings/power/rk3568-power.h | 32 - 25 files changed, 16097 deletions(-) delete mode 100644 arch/arm/dts/rk3566-anbernic-rgxx3.dtsi delete mode 100644 arch/arm/dts/rk3566-quartz64-a.dts delete mode 100644 arch/arm/dts/rk3566-quartz64-b.dts delete mode 100644 arch/arm/dts/rk3566-radxa-cm3-io.dts delete mode 100644 arch/arm/dts/rk3566-radxa-cm3.dtsi delete mode 100644 arch/arm/dts/rk3566-soquartz-blade.dts delete mode 100644 arch/arm/dts/rk3566-soquartz-cm4.dts delete mode 100644 arch/arm/dts/rk3566-soquartz-model-a.dts delete mode 100644 arch/arm/dts/rk3566-soquartz.dtsi delete mode 100644 arch/arm/dts/rk3566.dtsi delete mode 100644 arch/arm/dts/rk3568-bpi-r2-pro.dts delete mode 100644 arch/arm/dts/rk3568-evb.dts delete mode 100644 arch/arm/dts/rk3568-lubancat-2.dts delete mode 100644 arch/arm/dts/rk3568-nanopi-r5c.dts delete mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dts delete mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dtsi delete mode 100644 arch/arm/dts/rk3568-odroid-m1.dts delete mode 100644 arch/arm/dts/rk3568-pinctrl.dtsi delete mode 100644 arch/arm/dts/rk3568-radxa-cm3i.dtsi delete mode 100644 arch/arm/dts/rk3568-radxa-e25.dts delete mode 100644 arch/arm/dts/rk3568-rock-3a.dts delete mode 100644 arch/arm/dts/rk3568.dtsi delete mode 100644 arch/arm/dts/rk356x.dtsi delete mode 100644 include/dt-bindings/clock/rk3568-cru.h delete mode 100644 include/dt-bindings/power/rk3568-power.h