| Message ID | 20240504170537.376538-1-liujianfeng1994@gmail.com |
|---|---|
| State | New |
| Delegated to: | Kever Yang |
| Headers | show |
| Series | board: rockchip: add ArmSoM Sige7 Rk3588 board | expand |
Hi Jianfeng Liu, On 5/4/24 7:05 PM, Jianfeng Liu wrote: > [You don't often get email from liujianfeng1994@gmail.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ] > > ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by > ArmSoM. > > There are two variants depending on the DRAM size : 8G and 16G. > > Specification: > > Rockchip Rk3588 SoC > 4x ARM Cortex-A76, 4x ARM Cortex-A55 > 8/16GB memory LPDDR4x > Mali G610MC4 GPU > 2x MIPI CSI 2 multiple lanes connector > 64GB/128GB on board eMMC > uSD slot > 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C > 1x HDMI 2.1 output > 2x 2.5 Gbps Ethernet port > 40-pin IO header including UART, SPI and I2C > USB PD over USB Type-C > Size: 92mm x 62mm > > Kernel commit: > 81c828a67c78 (arm64: dts: rockchip: Add ArmSom Sige7 board) > > Note that these commits: > - e18e5e8188f2 (arm64: dts: rockchip: add USBDP phys on rk3588) > - 6fca4edb93d3 (arm64: dts: rockchip: Add rk3588 GPU node) > are not synced to u-boot, so I remove usb3 drd nodes and gpu from kernel > devicetree. > > Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> > --- > > MAINTAINERS | 1 + > arch/arm/dts/Makefile | 1 + > arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi | 31 + > arch/arm/dts/rk3588-armsom-sige7.dts | 691 +++++++++++++++++++ > arch/arm/mach-rockchip/rk3588/Kconfig | 26 + > board/armsom/sige7-rk3588/Kconfig | 12 + > board/armsom/sige7-rk3588/MAINTAINERS | 8 + > configs/sige7-rk3588_defconfig | 104 +++ > doc/board/rockchip/rockchip.rst | 1 + > include/configs/sige7-rk3588.h | 15 + > 10 files changed, 890 insertions(+) > create mode 100644 arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi > create mode 100644 arch/arm/dts/rk3588-armsom-sige7.dts > create mode 100644 board/armsom/sige7-rk3588/Kconfig > create mode 100644 board/armsom/sige7-rk3588/MAINTAINERS > create mode 100644 configs/sige7-rk3588_defconfig > create mode 100644 include/configs/sige7-rk3588.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 7a3b4d3712..52367bf38c 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -532,6 +532,7 @@ F: arch/arm/dts/rv11* > F: arch/arm/include/asm/arch-rockchip/ > F: arch/arm/mach-rockchip/ > F: board/amarula/vyasa-rk3288/ > +F: board/armsom/sige7-rk3588/ Can you order this alphabetically please? > F: board/anbernic/rgxx3_rk3566/ > F: board/chipspark/popmetal_rk3288 > F: board/engicam/px30_core/ > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index c9f1b25ad6..040238dede 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -166,6 +166,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \ > rk3568-rock-3a.dtb > > dtb-$(CONFIG_ROCKCHIP_RK3588) += \ > + rk3588-armsom-sige7.dtb \ > rk3588s-coolpi-4b.dtb \ > rk3588-coolpi-cm5-evb.dtb \ > rk3588-edgeble-neu6a-io.dtb \ > diff --git a/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi b/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi > new file mode 100644 > index 0000000000..b9196ba5f5 > --- /dev/null > +++ b/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi > @@ -0,0 +1,31 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2024 ArmSoM Technology Co., Ltd. > + */ > + > +#include "rk3588-u-boot.dtsi" > + > +&sdhci { > + cap-mmc-highspeed; I think this isn't supported in U-Boot on RK35xx devices just yet? We force everything to be HS200+ anyway if I remember correctly. > + mmc-hs200-1_8v; > +}; > + > +&u2phy1 { > + status = "okay"; > +}; > + > +&u2phy1_otg { > + status = "okay"; > +}; > + > +&usbdp_phy1 { > + status = "okay"; > +}; > + > +&usbdp_phy1_u3 { > + status = "okay"; > +}; > + > +&usb_host1_xhci { > + status = "okay"; > +}; > diff --git a/arch/arm/dts/rk3588-armsom-sige7.dts b/arch/arm/dts/rk3588-armsom-sige7.dts > new file mode 100644 > index 0000000000..c7b46536ec > --- /dev/null > +++ b/arch/arm/dts/rk3588-armsom-sige7.dts > @@ -0,0 +1,691 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > +#include "rk3588.dtsi" > + > +/ { > + model = "ArmSoM Sige7"; > + compatible = "armsom,sige7", "rockchip,rk3588"; > + > + aliases { > + mmc0 = &sdhci; > + mmc1 = &sdmmc; > + }; > + > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + analog-sound { > + compatible = "audio-graph-card"; > + dais = <&i2s0_8ch_p0>; > + label = "rk3588-es8316"; > + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hp_detect>; > + routing = "MIC2", "Mic Jack", > + "Headphones", "HPOL", > + "Headphones", "HPOR"; > + widgets = "Microphone", "Mic Jack", > + "Headphone", "Headphones"; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&led_rgb_g>; > + > + led_green: led-0 { > + color = <LED_COLOR_ID_GREEN>; > + function = LED_FUNCTION_STATUS; > + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + > + led_red: led-1 { > + color = <LED_COLOR_ID_RED>; > + function = LED_FUNCTION_STATUS; > + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "none"; > + }; > + }; > + > + fan: pwm-fan { > + compatible = "pwm-fan"; > + cooling-levels = <0 95 145 195 255>; > + fan-supply = <&vcc5v0_sys>; > + pwms = <&pwm1 0 50000 0>; > + #cooling-cells = <2>; > + }; > + > + vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_pcie2x1l2"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + startup-delay-us = <5000>; > + vin-supply = <&vcc_3v3_s3>; > + }; > + > + vcc3v3_pcie30: vcc3v3-pcie30-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; > + regulator-name = "vcc3v3_pcie30"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + startup-delay-us = <5000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_host"; > + regulator-boot-on; > + regulator-always-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + enable-active-high; > + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_sys: vcc5v0-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_1v1_nldo_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + vin-supply = <&vcc5v0_sys>; > + }; > +}; > + > +&combphy0_ps { > + status = "okay"; > +}; > + > +&combphy1_ps { > + status = "okay"; > +}; > + > +&combphy2_psu { > + status = "okay"; > +}; > + > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_big0_s0>; > +}; > + > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_big0_s0>; > +}; > + > +&cpu_b2 { > + cpu-supply = <&vdd_cpu_big1_s0>; > +}; > + > +&cpu_b3 { > + cpu-supply = <&vdd_cpu_big1_s0>; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_lit_s0>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_lit_s0>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_lit_s0>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_lit_s0>; > +}; > + > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0m2_xfer>; > + status = "okay"; > + > + vdd_cpu_big0_s0: regulator@42 { > + compatible = "rockchip,rk8602"; > + reg = <0x42>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu_big0_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <1050000>; > + regulator-ramp-delay = <2300>; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_big1_s0: regulator@43 { > + compatible = "rockchip,rk8603", "rockchip,rk8602"; > + reg = <0x43>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu_big1_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <1050000>; > + regulator-ramp-delay = <2300>; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > +}; > + > +&i2c6 { > + status = "okay"; > + > + hym8563: rtc@51 { > + compatible = "haoyu,hym8563"; > + reg = <0x51>; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <0>; > + clock-output-names = "hym8563"; > + pinctrl-names = "default"; > + pinctrl-0 = <&hym8563_int>; > + wakeup-source; > + }; > +}; > + > +&i2c7 { > + status = "okay"; > + > + es8316: audio-codec@11 { > + compatible = "everest,es8316"; > + reg = <0x11>; > + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; > + assigned-clock-rates = <12288000>; > + clocks = <&cru I2S0_8CH_MCLKOUT>; > + clock-names = "mclk"; > + #sound-dai-cells = <0>; > + > + port { > + es8316_p0_0: endpoint { > + remote-endpoint = <&i2s0_8ch_p0_0>; > + }; > + }; > + }; > +}; > + > +&i2s0_8ch { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s0_lrck > + &i2s0_mclk > + &i2s0_sclk > + &i2s0_sdi0 > + &i2s0_sdo0>; > + status = "okay"; > + > + i2s0_8ch_p0: port { > + i2s0_8ch_p0_0: endpoint { > + dai-format = "i2s"; > + mclk-fs = <256>; > + remote-endpoint = <&es8316_p0_0>; > + }; > + }; > +}; > + > +/* phy1 - right ethernet port */ > +&pcie2x1l0 { > + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +/* phy2 - WiFi */ > +&pcie2x1l1 { > + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +/* phy0 - left ethernet port */ > +&pcie2x1l2 { > + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&pcie30phy { > + status = "okay"; > +}; > + > +&pcie3x4 { > + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; > + vpcie3v3-supply = <&vcc3v3_pcie30>; > + status = "okay"; > +}; > + > +&pinctrl { > + hym8563 { > + hym8563_int: hym8563-int { > + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + leds { > + led_rgb_g: led-rgb-g { > + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + led_rgb_r: led-rgb-r { > + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + sound { > + hp_detect: hp-detect { > + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + usb { > + vcc5v0_host_en: vcc5v0-host-en { > + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&pwm1 { > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&avcc_1v8_s0>; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + no-sdio; > + no-sd; > + non-removable; > + mmc-hs200-1_8v; > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + disable-wp; > + max-frequency = <200000000>; > + no-sdio; > + no-mmc; > + sd-uhs-sdr104; > + vmmc-supply = <&vcc_3v3_s3>; > + vqmmc-supply = <&vccio_sd_s0>; > + status = "okay"; > +}; > + > +&spi2 { > + assigned-clocks = <&cru CLK_SPI2>; > + assigned-clock-rates = <200000000>; > + num-cs = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; > + status = "okay"; > + > + pmic@0 { > + compatible = "rockchip,rk806"; > + spi-max-frequency = <1000000>; > + reg = <0x0>; > + > + interrupt-parent = <&gpio0>; > + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, > + <&rk806_dvs2_null>, <&rk806_dvs3_null>; > + > + system-power-controller; > + > + vcc1-supply = <&vcc5v0_sys>; > + vcc2-supply = <&vcc5v0_sys>; > + vcc3-supply = <&vcc5v0_sys>; > + vcc4-supply = <&vcc5v0_sys>; > + vcc5-supply = <&vcc5v0_sys>; > + vcc6-supply = <&vcc5v0_sys>; > + vcc7-supply = <&vcc5v0_sys>; > + vcc8-supply = <&vcc5v0_sys>; > + vcc9-supply = <&vcc5v0_sys>; > + vcc10-supply = <&vcc5v0_sys>; > + vcc11-supply = <&vcc_2v0_pldo_s3>; > + vcc12-supply = <&vcc5v0_sys>; > + vcc13-supply = <&vcc_1v1_nldo_s3>; > + vcc14-supply = <&vcc_1v1_nldo_s3>; > + vcca-supply = <&vcc5v0_sys>; > + > + rk806_dvs1_null: dvs1-null-pins { > + pins = "gpio_pwrctrl1"; > + function = "pin_fun0"; > + }; > + > + rk806_dvs2_null: dvs2-null-pins { > + pins = "gpio_pwrctrl2"; > + function = "pin_fun0"; > + }; > + > + rk806_dvs3_null: dvs3-null-pins { > + pins = "gpio_pwrctrl3"; > + function = "pin_fun0"; > + }; > + > + regulators { > + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_gpu_s0"; > + regulator-enable-ramp-delay = <400>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_cpu_lit_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_log_s0: dcdc-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <750000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_log_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <750000>; > + }; > + }; > + > + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_vdenc_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_ddr_s0: dcdc-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <900000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_ddr_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <850000>; > + }; > + }; > + > + vdd2_ddr_s3: dcdc-reg6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vdd2_ddr_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_2v0_pldo_s3: dcdc-reg7 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <2000000>; > + regulator-max-microvolt = <2000000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_2v0_pldo_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <2000000>; > + }; > + }; > + > + vcc_3v3_s3: dcdc-reg8 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc_3v3_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vddq_ddr_s0: dcdc-reg9 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vddq_ddr_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v8_s3: dcdc-reg10 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc_1v8_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + avcc_1v8_s0: pldo-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "avcc_1v8_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v8_s0: pldo-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc_1v8_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + avdd_1v2_s0: pldo-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-name = "avdd_1v2_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v3_s0: pldo-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vcc_3v3_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vccio_sd_s0: pldo-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vccio_sd_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + pldo6_s3: pldo-reg6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "pldo6_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vdd_0v75_s3: nldo-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <750000>; > + regulator-name = "vdd_0v75_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <750000>; > + }; > + }; > + > + vdd_ddr_pll_s0: nldo-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <850000>; > + regulator-name = "vdd_ddr_pll_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <850000>; > + }; > + }; > + > + avdd_0v75_s0: nldo-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <750000>; > + regulator-name = "avdd_0v75_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_0v85_s0: nldo-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <850000>; > + regulator-name = "vdd_0v85_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_0v75_s0: nldo-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <750000>; > + regulator-name = "vdd_0v75_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > +}; > + > +&u2phy3 { > + status = "okay"; > +}; > + > +&u2phy3_host { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-0 = <&uart2m0_xfer>; > + status = "okay"; > +}; > + > +&usb_host1_ehci { > + status = "okay"; > +}; > + > +&usb_host1_ohci { > + status = "okay"; > +}; > diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig > index 39049ab35a..4c14b0be1e 100644 > --- a/arch/arm/mach-rockchip/rk3588/Kconfig > +++ b/arch/arm/mach-rockchip/rk3588/Kconfig > @@ -152,6 +152,31 @@ config TARGET_ROCK5B_RK3588 > USB PD over USB Type-C > Size: 100mm x 72mm (Pico-ITX form factor) > > +config TARGET_SIGE7_RK3588 > + bool "ArmSoM Sige7 RK3588 board" > + select BOARD_LATE_INIT > + help > + ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) > + by ArmSoM. > + > + There are two variants depending on the DRAM size : 8G and 16G. > + > + Specification: > + > + Rockchip Rk3588 SoC > + 4x ARM Cortex-A76, 4x ARM Cortex-A55 > + 8/16GB memory LPDDR4x > + Mali G610MC4 GPU > + 2x MIPI CSI 2 multiple lanes connector > + 64GB/128GB on board eMMC > + uSD slot > + 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C > + 1x HDMI 2.1 output > + 2x 2.5 Gbps Ethernet port > + 40-pin IO header including UART, SPI and I2C > + USB PD over USB Type-C > + Size: 92mm x 62mm > + > config TARGET_QUARTZPRO64_RK3588 > bool "Pine64 QuartzPro64 RK3588 board" > select BOARD_LATE_INIT > @@ -221,6 +246,7 @@ config ROCKCHIP_COMMON_STACK_ADDR > config TEXT_BASE > default 0x00a00000 > > +source "board/armsom/sige7-rk3588/Kconfig" > source "board/edgeble/neural-compute-module-6/Kconfig" > source "board/friendlyelec/nanopc-t6-rk3588/Kconfig" > source "board/pine64/quartzpro64-rk3588/Kconfig" > diff --git a/board/armsom/sige7-rk3588/Kconfig b/board/armsom/sige7-rk3588/Kconfig > new file mode 100644 > index 0000000000..793985f531 > --- /dev/null > +++ b/board/armsom/sige7-rk3588/Kconfig > @@ -0,0 +1,12 @@ > +if TARGET_SIGE7_RK3588 > + > +config SYS_BOARD > + default "sige7-rk3588" > + > +config SYS_VENDOR > + default "armsom" > + > +config SYS_CONFIG_NAME > + default "sige7-rk3588" > + > +endif > diff --git a/board/armsom/sige7-rk3588/MAINTAINERS b/board/armsom/sige7-rk3588/MAINTAINERS > new file mode 100644 > index 0000000000..0b84946284 > --- /dev/null > +++ b/board/armsom/sige7-rk3588/MAINTAINERS > @@ -0,0 +1,8 @@ > +SIGE7-RK3588 > +M: Jianfeng Liu <liujianfeng1994@gmail.com> > +S: Maintained > +F: board/armsom/sige7-rk3588 > +F: include/configs/sige7-rk3588.h > +F: configs/sige7-rk3588_defconfig > +F: arch/arm/dts/rk3588-armsom-sige7.dts > +F: arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi I would recommend using arch/arm/dts/rk3588-armsom-sige7* here instead, as to not have to maintain a list of DTSes (e.g. if overlays are supported one day?) > diff --git a/configs/sige7-rk3588_defconfig b/configs/sige7-rk3588_defconfig > new file mode 100644 > index 0000000000..76fcd2878c > --- /dev/null > +++ b/configs/sige7-rk3588_defconfig > @@ -0,0 +1,104 @@ > +CONFIG_ARM=y > +CONFIG_SKIP_LOWLEVEL_INIT=y > +CONFIG_SYS_HAS_NONCACHED_MEMORY=y > +CONFIG_COUNTER_FREQUENCY=24000000 > +CONFIG_ARCH_ROCKCHIP=y > +CONFIG_SF_DEFAULT_SPEED=24000000 > +CONFIG_SF_DEFAULT_MODE=0x2000 > +CONFIG_DEFAULT_DEVICE_TREE="rk3588-armsom-sige7" > +CONFIG_ROCKCHIP_RK3588=y > +CONFIG_ROCKCHIP_SPI_IMAGE=y The wiki doesn't seem to indicate there's any SPI flash on that device so I don't think we need to support anything related to it, especially the creation of the image to flash on an SPI nor? > +CONFIG_SPL_SERIAL=y > +CONFIG_TARGET_SIGE7_RK3588=y > +CONFIG_DEBUG_UART_BASE=0xFEB50000 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_SPL_SPI_FLASH_SUPPORT=y > +CONFIG_SPL_SPI=y > +CONFIG_SYS_LOAD_ADDR=0xc00800 > +CONFIG_PCI=y > +CONFIG_DEBUG_UART=y > +CONFIG_AHCI=y > +CONFIG_FIT=y > +CONFIG_FIT_VERBOSE=y > +CONFIG_SPL_FIT_SIGNATURE=y > +CONFIG_SPL_LOAD_FIT=y > +CONFIG_LEGACY_IMAGE_FORMAT=y > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-armsom-sige7.dtb" > +# CONFIG_DISPLAY_CPUINFO is not set > +CONFIG_DISPLAY_BOARDINFO_LATE=y > +CONFIG_SPL_MAX_SIZE=0x40000 > +CONFIG_SPL_PAD_TO=0x7f8000 > +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set > +CONFIG_SPL_SPI_LOAD=y > +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 > +CONFIG_SPL_ATF=y > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_GPT=y > +CONFIG_CMD_I2C=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_PCI=y > +CONFIG_CMD_USB=y > +CONFIG_CMD_ROCKUSB=y > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_CMD_REGULATOR=y > +# CONFIG_SPL_DOS_PARTITION is not set > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_OF_LIVE=y > +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > +CONFIG_SPL_DM_SEQ_ALIAS=y > +CONFIG_SPL_REGMAP=y > +CONFIG_SPL_SYSCON=y > +CONFIG_AHCI_PCI=y > +CONFIG_DWC_AHCI=y > +CONFIG_SPL_CLK=y > +# CONFIG_USB_FUNCTION_FASTBOOT is not set > +CONFIG_ROCKCHIP_GPIO=y > +CONFIG_SYS_I2C_ROCKCHIP=y > +CONFIG_MISC=y > +CONFIG_SUPPORT_EMMC_RPMB=y > +CONFIG_MMC_DW=y > +CONFIG_MMC_DW_ROCKCHIP=y > +CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_SDMA=y > +CONFIG_MMC_SDHCI_ROCKCHIP=y > +CONFIG_SF_DEFAULT_BUS=5 > +CONFIG_SPI_FLASH_SFDP_SUPPORT=y > +CONFIG_SPI_FLASH_MACRONIX=y > +CONFIG_SPI_FLASH_XTX=y Ditto. > +CONFIG_PHYLIB=y > +CONFIG_RTL8169=y > +CONFIG_NVME_PCI=y > +CONFIG_PCIE_DW_ROCKCHIP=y > +CONFIG_PHY_ROCKCHIP_INNO_USB2=y > +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y > +CONFIG_PHY_ROCKCHIP_USBDP=y > +CONFIG_SPL_PINCTRL=y > +CONFIG_PWM_ROCKCHIP=y > +CONFIG_SPL_RAM=y > +CONFIG_SCSI=y > +CONFIG_BAUDRATE=1500000 > +CONFIG_DEBUG_UART_SHIFT=2 > +CONFIG_SYS_NS16550_MEM32=y > +CONFIG_ROCKCHIP_SFC=y Ditto. > +CONFIG_SYSRESET=y > +CONFIG_USB=y > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_EHCI_GENERIC=y > +CONFIG_USB_OHCI_HCD=y > +CONFIG_USB_OHCI_GENERIC=y > +CONFIG_USB_DWC3=y > +CONFIG_USB_DWC3_GENERIC=y > +CONFIG_SPL_USB_DWC3_GENERIC=y > +CONFIG_USB_HOST_ETHER=y > +CONFIG_USB_ETHER_ASIX=y > +CONFIG_USB_ETHER_ASIX88179=y > +CONFIG_USB_ETHER_LAN75XX=y > +CONFIG_USB_ETHER_LAN78XX=y > +CONFIG_USB_ETHER_MCS7830=y > +CONFIG_USB_ETHER_RTL8152=y > +CONFIG_USB_ETHER_SMSC95XX=y I'm surprised to see USB_ETHER support here? Is this something done on purpose? The board already has two 2.5Gbps Ethernet, are they not working? Cheers, Quentin
Hi Quentin, Many thanks to your review. On May 6, 2024, 8:54 a.m. UTC, Quentin Schulz wrote: >> F: arch/arm/include/asm/arch-rockchip/ >> F: arch/arm/mach-rockchip/ >> F: board/amarula/vyasa-rk3288/ >> +F: board/armsom/sige7-rk3588/ > >Can you order this alphabetically please? Sure, I will fix it. >> +&sdhci { >> + cap-mmc-highspeed; > >I think this isn't supported in U-Boot on RK35xx devices just yet? We >force everything to be HS200+ anyway if I remember correctly. I use the same devicetree as rock5b[1] and I haven't encountered issues. I also remember kernel driver has issues with mmc-hs400, which will cause system unstable, but it seems that this is fine in u-boot. [1] https://github.com/u-boot/u-boot/blob/bcaf6c0570deb7dcd3c029d2e74efea740a0b20a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi#L34 >I would recommend using >arch/arm/dts/rk3588-armsom-sige7* here instead, as to not have to >maintain a list of DTSes (e.g. if overlays are supported one day?) Sure, I will change it. >The wiki doesn't seem to indicate there's any SPI flash on that device >so I don't think we need to support anything related to it, especially >the creation of the image to flash on an SPI nor? Yes there is no spi flash on board. I will delete those SPI flash related configs. >> +CONFIG_USB_HOST_ETHER=y >> +CONFIG_USB_ETHER_ASIX=y >> +CONFIG_USB_ETHER_ASIX88179=y >> +CONFIG_USB_ETHER_LAN75XX=y >> +CONFIG_USB_ETHER_LAN78XX=y >> +CONFIG_USB_ETHER_MCS7830=y >> +CONFIG_USB_ETHER_RTL8152=y >> +CONFIG_USB_ETHER_SMSC95XX=y > >I'm surprised to see USB_ETHER support here? Is this something done on >purpose? The board already has two 2.5Gbps Ethernet, are they not working? I copied these configs from rock5b. I guess someone should have the need to do net boot through usb ethernet since there is also usb support. Best regards, Jianfeng Quentin Schulz <quentin.schulz@cherry.de> 于2024年5月6日周一 16:54写道： > Hi Jianfeng Liu, > > On 5/4/24 7:05 PM, Jianfeng Liu wrote: > > [You don't often get email from liujianfeng1994@gmail.com. Learn why > this is important at https://aka.ms/LearnAboutSenderIdentification ] > > > > ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by > > ArmSoM. > > > > There are two variants depending on the DRAM size : 8G and 16G. > > > > Specification: > > > > Rockchip Rk3588 SoC > > 4x ARM Cortex-A76, 4x ARM Cortex-A55 > > 8/16GB memory LPDDR4x > > Mali G610MC4 GPU > > 2x MIPI CSI 2 multiple lanes connector > > 64GB/128GB on board eMMC > > uSD slot > > 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C > > 1x HDMI 2.1 output > > 2x 2.5 Gbps Ethernet port > > 40-pin IO header including UART, SPI and I2C > > USB PD over USB Type-C > > Size: 92mm x 62mm > > > > Kernel commit: > > 81c828a67c78 (arm64: dts: rockchip: Add ArmSom Sige7 board) > > > > Note that these commits: > > - e18e5e8188f2 (arm64: dts: rockchip: add USBDP phys on rk3588) > > - 6fca4edb93d3 (arm64: dts: rockchip: Add rk3588 GPU node) > > are not synced to u-boot, so I remove usb3 drd nodes and gpu from kernel > > devicetree. > > > > Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> > > --- > > > > MAINTAINERS | 1 + > > arch/arm/dts/Makefile | 1 + > > arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi | 31 + > > arch/arm/dts/rk3588-armsom-sige7.dts | 691 +++++++++++++++++++ > > arch/arm/mach-rockchip/rk3588/Kconfig | 26 + > > board/armsom/sige7-rk3588/Kconfig | 12 + > > board/armsom/sige7-rk3588/MAINTAINERS | 8 + > > configs/sige7-rk3588_defconfig | 104 +++ > > doc/board/rockchip/rockchip.rst | 1 + > > include/configs/sige7-rk3588.h | 15 + > > 10 files changed, 890 insertions(+) > > create mode 100644 arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi > > create mode 100644 arch/arm/dts/rk3588-armsom-sige7.dts > > create mode 100644 board/armsom/sige7-rk3588/Kconfig > > create mode 100644 board/armsom/sige7-rk3588/MAINTAINERS > > create mode 100644 configs/sige7-rk3588_defconfig > > create mode 100644 include/configs/sige7-rk3588.h > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 7a3b4d3712..52367bf38c 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -532,6 +532,7 @@ F: arch/arm/dts/rv11* > > F: arch/arm/include/asm/arch-rockchip/ > > F: arch/arm/mach-rockchip/ > > F: board/amarula/vyasa-rk3288/ > > +F: board/armsom/sige7-rk3588/ > > Can you order this alphabetically please? > > > F: board/anbernic/rgxx3_rk3566/ > > F: board/chipspark/popmetal_rk3288 > > F: board/engicam/px30_core/ > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > > index c9f1b25ad6..040238dede 100644 > > --- a/arch/arm/dts/Makefile > > +++ b/arch/arm/dts/Makefile > > @@ -166,6 +166,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \ > > rk3568-rock-3a.dtb > > > > dtb-$(CONFIG_ROCKCHIP_RK3588) += \ > > + rk3588-armsom-sige7.dtb \ > > rk3588s-coolpi-4b.dtb \ > > rk3588-coolpi-cm5-evb.dtb \ > > rk3588-edgeble-neu6a-io.dtb \ > > diff --git a/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi > b/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi > > new file mode 100644 > > index 0000000000..b9196ba5f5 > > --- /dev/null > > +++ b/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi > > @@ -0,0 +1,31 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > +/* > > + * Copyright (c) 2024 ArmSoM Technology Co., Ltd. > > + */ > > + > > +#include "rk3588-u-boot.dtsi" > > + > > +&sdhci { > > + cap-mmc-highspeed; > > I think this isn't supported in U-Boot on RK35xx devices just yet? We > force everything to be HS200+ anyway if I remember correctly. > > > + mmc-hs200-1_8v; > > +}; > > + > > +&u2phy1 { > > + status = "okay"; > > +}; > > + > > +&u2phy1_otg { > > + status = "okay"; > > +}; > > + > > +&usbdp_phy1 { > > + status = "okay"; > > +}; > > + > > +&usbdp_phy1_u3 { > > + status = "okay"; > > +}; > > + > > +&usb_host1_xhci { > > + status = "okay"; > > +}; > > diff --git a/arch/arm/dts/rk3588-armsom-sige7.dts > b/arch/arm/dts/rk3588-armsom-sige7.dts > > new file mode 100644 > > index 0000000000..c7b46536ec > > --- /dev/null > > +++ b/arch/arm/dts/rk3588-armsom-sige7.dts > > @@ -0,0 +1,691 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > + > > +/dts-v1/; > > + > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/leds/common.h> > > +#include "rk3588.dtsi" > > + > > +/ { > > + model = "ArmSoM Sige7"; > > + compatible = "armsom,sige7", "rockchip,rk3588"; > > + > > + aliases { > > + mmc0 = &sdhci; > > + mmc1 = &sdmmc; > > + }; > > + > > + chosen { > > + stdout-path = "serial2:1500000n8"; > > + }; > > + > > + analog-sound { > > + compatible = "audio-graph-card"; > > + dais = <&i2s0_8ch_p0>; > > + label = "rk3588-es8316"; > > + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&hp_detect>; > > + routing = "MIC2", "Mic Jack", > > + "Headphones", "HPOL", > > + "Headphones", "HPOR"; > > + widgets = "Microphone", "Mic Jack", > > + "Headphone", "Headphones"; > > + }; > > + > > + leds { > > + compatible = "gpio-leds"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&led_rgb_g>; > > + > > + led_green: led-0 { > > + color = <LED_COLOR_ID_GREEN>; > > + function = LED_FUNCTION_STATUS; > > + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > > + linux,default-trigger = "heartbeat"; > > + }; > > + > > + led_red: led-1 { > > + color = <LED_COLOR_ID_RED>; > > + function = LED_FUNCTION_STATUS; > > + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; > > + linux,default-trigger = "none"; > > + }; > > + }; > > + > > + fan: pwm-fan { > > + compatible = "pwm-fan"; > > + cooling-levels = <0 95 145 195 255>; > > + fan-supply = <&vcc5v0_sys>; > > + pwms = <&pwm1 0 50000 0>; > > + #cooling-cells = <2>; > > + }; > > + > > + vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator { > > + compatible = "regulator-fixed"; > > + regulator-name = "vcc3v3_pcie2x1l2"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + startup-delay-us = <5000>; > > + vin-supply = <&vcc_3v3_s3>; > > + }; > > + > > + vcc3v3_pcie30: vcc3v3-pcie30-regulator { > > + compatible = "regulator-fixed"; > > + enable-active-high; > > + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; > > + regulator-name = "vcc3v3_pcie30"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + startup-delay-us = <5000>; > > + vin-supply = <&vcc5v0_sys>; > > + }; > > + > > + vcc5v0_host: vcc5v0-host-regulator { > > + compatible = "regulator-fixed"; > > + regulator-name = "vcc5v0_host"; > > + regulator-boot-on; > > + regulator-always-on; > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > > + enable-active-high; > > + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&vcc5v0_host_en>; > > + vin-supply = <&vcc5v0_sys>; > > + }; > > + > > + vcc5v0_sys: vcc5v0-sys-regulator { > > + compatible = "regulator-fixed"; > > + regulator-name = "vcc5v0_sys"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > > + }; > > + > > + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { > > + compatible = "regulator-fixed"; > > + regulator-name = "vcc_1v1_nldo_s3"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1100000>; > > + regulator-max-microvolt = <1100000>; > > + vin-supply = <&vcc5v0_sys>; > > + }; > > +}; > > + > > +&combphy0_ps { > > + status = "okay"; > > +}; > > + > > +&combphy1_ps { > > + status = "okay"; > > +}; > > + > > +&combphy2_psu { > > + status = "okay"; > > +}; > > + > > +&cpu_b0 { > > + cpu-supply = <&vdd_cpu_big0_s0>; > > +}; > > + > > +&cpu_b1 { > > + cpu-supply = <&vdd_cpu_big0_s0>; > > +}; > > + > > +&cpu_b2 { > > + cpu-supply = <&vdd_cpu_big1_s0>; > > +}; > > + > > +&cpu_b3 { > > + cpu-supply = <&vdd_cpu_big1_s0>; > > +}; > > + > > +&cpu_l0 { > > + cpu-supply = <&vdd_cpu_lit_s0>; > > +}; > > + > > +&cpu_l1 { > > + cpu-supply = <&vdd_cpu_lit_s0>; > > +}; > > + > > +&cpu_l2 { > > + cpu-supply = <&vdd_cpu_lit_s0>; > > +}; > > + > > +&cpu_l3 { > > + cpu-supply = <&vdd_cpu_lit_s0>; > > +}; > > + > > +&i2c0 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2c0m2_xfer>; > > + status = "okay"; > > + > > + vdd_cpu_big0_s0: regulator@42 { > > + compatible = "rockchip,rk8602"; > > + reg = <0x42>; > > + fcs,suspend-voltage-selector = <1>; > > + regulator-name = "vdd_cpu_big0_s0"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <550000>; > > + regulator-max-microvolt = <1050000>; > > + regulator-ramp-delay = <2300>; > > + vin-supply = <&vcc5v0_sys>; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + > > + vdd_cpu_big1_s0: regulator@43 { > > + compatible = "rockchip,rk8603", "rockchip,rk8602"; > > + reg = <0x43>; > > + fcs,suspend-voltage-selector = <1>; > > + regulator-name = "vdd_cpu_big1_s0"; > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <550000>; > > + regulator-max-microvolt = <1050000>; > > + regulator-ramp-delay = <2300>; > > + vin-supply = <&vcc5v0_sys>; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > +}; > > + > > +&i2c6 { > > + status = "okay"; > > + > > + hym8563: rtc@51 { > > + compatible = "haoyu,hym8563"; > > + reg = <0x51>; > > + interrupt-parent = <&gpio0>; > > + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; > > + #clock-cells = <0>; > > + clock-output-names = "hym8563"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&hym8563_int>; > > + wakeup-source; > > + }; > > +}; > > + > > +&i2c7 { > > + status = "okay"; > > + > > + es8316: audio-codec@11 { > > + compatible = "everest,es8316"; > > + reg = <0x11>; > > + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; > > + assigned-clock-rates = <12288000>; > > + clocks = <&cru I2S0_8CH_MCLKOUT>; > > + clock-names = "mclk"; > > + #sound-dai-cells = <0>; > > + > > + port { > > + es8316_p0_0: endpoint { > > + remote-endpoint = <&i2s0_8ch_p0_0>; > > + }; > > + }; > > + }; > > +}; > > + > > +&i2s0_8ch { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2s0_lrck > > + &i2s0_mclk > > + &i2s0_sclk > > + &i2s0_sdi0 > > + &i2s0_sdo0>; > > + status = "okay"; > > + > > + i2s0_8ch_p0: port { > > + i2s0_8ch_p0_0: endpoint { > > + dai-format = "i2s"; > > + mclk-fs = <256>; > > + remote-endpoint = <&es8316_p0_0>; > > + }; > > + }; > > +}; > > + > > +/* phy1 - right ethernet port */ > > +&pcie2x1l0 { > > + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; > > + status = "okay"; > > +}; > > + > > +/* phy2 - WiFi */ > > +&pcie2x1l1 { > > + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; > > + status = "okay"; > > +}; > > + > > +/* phy0 - left ethernet port */ > > +&pcie2x1l2 { > > + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; > > + status = "okay"; > > +}; > > + > > +&pcie30phy { > > + status = "okay"; > > +}; > > + > > +&pcie3x4 { > > + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; > > + vpcie3v3-supply = <&vcc3v3_pcie30>; > > + status = "okay"; > > +}; > > + > > +&pinctrl { > > + hym8563 { > > + hym8563_int: hym8563-int { > > + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO > &pcfg_pull_none>; > > + }; > > + }; > > + > > + leds { > > + led_rgb_g: led-rgb-g { > > + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO > &pcfg_pull_none>; > > + }; > > + led_rgb_r: led-rgb-r { > > + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO > &pcfg_pull_none>; > > + }; > > + }; > > + > > + sound { > > + hp_detect: hp-detect { > > + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO > &pcfg_pull_none>; > > + }; > > + }; > > + > > + usb { > > + vcc5v0_host_en: vcc5v0-host-en { > > + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO > &pcfg_pull_none>; > > + }; > > + }; > > +}; > > + > > +&pwm1 { > > + status = "okay"; > > +}; > > + > > +&saradc { > > + vref-supply = <&avcc_1v8_s0>; > > + status = "okay"; > > +}; > > + > > +&sdhci { > > + bus-width = <8>; > > + no-sdio; > > + no-sd; > > + non-removable; > > + mmc-hs200-1_8v; > > + status = "okay"; > > +}; > > + > > +&sdmmc { > > + bus-width = <4>; > > + cap-mmc-highspeed; > > + cap-sd-highspeed; > > + disable-wp; > > + max-frequency = <200000000>; > > + no-sdio; > > + no-mmc; > > + sd-uhs-sdr104; > > + vmmc-supply = <&vcc_3v3_s3>; > > + vqmmc-supply = <&vccio_sd_s0>; > > + status = "okay"; > > +}; > > + > > +&spi2 { > > + assigned-clocks = <&cru CLK_SPI2>; > > + assigned-clock-rates = <200000000>; > > + num-cs = <1>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; > > + status = "okay"; > > + > > + pmic@0 { > > + compatible = "rockchip,rk806"; > > + spi-max-frequency = <1000000>; > > + reg = <0x0>; > > + > > + interrupt-parent = <&gpio0>; > > + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; > > + > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, > > + <&rk806_dvs2_null>, <&rk806_dvs3_null>; > > + > > + system-power-controller; > > + > > + vcc1-supply = <&vcc5v0_sys>; > > + vcc2-supply = <&vcc5v0_sys>; > > + vcc3-supply = <&vcc5v0_sys>; > > + vcc4-supply = <&vcc5v0_sys>; > > + vcc5-supply = <&vcc5v0_sys>; > > + vcc6-supply = <&vcc5v0_sys>; > > + vcc7-supply = <&vcc5v0_sys>; > > + vcc8-supply = <&vcc5v0_sys>; > > + vcc9-supply = <&vcc5v0_sys>; > > + vcc10-supply = <&vcc5v0_sys>; > > + vcc11-supply = <&vcc_2v0_pldo_s3>; > > + vcc12-supply = <&vcc5v0_sys>; > > + vcc13-supply = <&vcc_1v1_nldo_s3>; > > + vcc14-supply = <&vcc_1v1_nldo_s3>; > > + vcca-supply = <&vcc5v0_sys>; > > + > > + rk806_dvs1_null: dvs1-null-pins { > > + pins = "gpio_pwrctrl1"; > > + function = "pin_fun0"; > > + }; > > + > > + rk806_dvs2_null: dvs2-null-pins { > > + pins = "gpio_pwrctrl2"; > > + function = "pin_fun0"; > > + }; > > + > > + rk806_dvs3_null: dvs3-null-pins { > > + pins = "gpio_pwrctrl3"; > > + function = "pin_fun0"; > > + }; > > + > > + regulators { > > + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <550000>; > > + regulator-max-microvolt = <950000>; > > + regulator-ramp-delay = <12500>; > > + regulator-name = "vdd_gpu_s0"; > > + regulator-enable-ramp-delay = <400>; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + > > + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <550000>; > > + regulator-max-microvolt = <950000>; > > + regulator-ramp-delay = <12500>; > > + regulator-name = "vdd_cpu_lit_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + > > + vdd_log_s0: dcdc-reg3 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <675000>; > > + regulator-max-microvolt = <750000>; > > + regulator-ramp-delay = <12500>; > > + regulator-name = "vdd_log_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = > <750000>; > > + }; > > + }; > > + > > + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <550000>; > > + regulator-max-microvolt = <950000>; > > + regulator-ramp-delay = <12500>; > > + regulator-name = "vdd_vdenc_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + > > + vdd_ddr_s0: dcdc-reg5 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <675000>; > > + regulator-max-microvolt = <900000>; > > + regulator-ramp-delay = <12500>; > > + regulator-name = "vdd_ddr_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = > <850000>; > > + }; > > + }; > > + > > + vdd2_ddr_s3: dcdc-reg6 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-name = "vdd2_ddr_s3"; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + }; > > + }; > > + > > + vcc_2v0_pldo_s3: dcdc-reg7 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <2000000>; > > + regulator-max-microvolt = <2000000>; > > + regulator-ramp-delay = <12500>; > > + regulator-name = "vdd_2v0_pldo_s3"; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = > <2000000>; > > + }; > > + }; > > + > > + vcc_3v3_s3: dcdc-reg8 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-name = "vcc_3v3_s3"; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = > <3300000>; > > + }; > > + }; > > + > > + vddq_ddr_s0: dcdc-reg9 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-name = "vddq_ddr_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + > > + vcc_1v8_s3: dcdc-reg10 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-name = "vcc_1v8_s3"; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = > <1800000>; > > + }; > > + }; > > + > > + avcc_1v8_s0: pldo-reg1 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-name = "avcc_1v8_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + > > + vcc_1v8_s0: pldo-reg2 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-name = "vcc_1v8_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = > <1800000>; > > + }; > > + }; > > + > > + avdd_1v2_s0: pldo-reg3 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-name = "avdd_1v2_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + > > + vcc_3v3_s0: pldo-reg4 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-ramp-delay = <12500>; > > + regulator-name = "vcc_3v3_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + > > + vccio_sd_s0: pldo-reg5 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-ramp-delay = <12500>; > > + regulator-name = "vccio_sd_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + > > + pldo6_s3: pldo-reg6 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-name = "pldo6_s3"; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = > <1800000>; > > + }; > > + }; > > + > > + vdd_0v75_s3: nldo-reg1 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <750000>; > > + regulator-max-microvolt = <750000>; > > + regulator-name = "vdd_0v75_s3"; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = > <750000>; > > + }; > > + }; > > + > > + vdd_ddr_pll_s0: nldo-reg2 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <850000>; > > + regulator-max-microvolt = <850000>; > > + regulator-name = "vdd_ddr_pll_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = > <850000>; > > + }; > > + }; > > + > > + avdd_0v75_s0: nldo-reg3 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <750000>; > > + regulator-max-microvolt = <750000>; > > + regulator-name = "avdd_0v75_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + > > + vdd_0v85_s0: nldo-reg4 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <850000>; > > + regulator-max-microvolt = <850000>; > > + regulator-name = "vdd_0v85_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + > > + vdd_0v75_s0: nldo-reg5 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <750000>; > > + regulator-max-microvolt = <750000>; > > + regulator-name = "vdd_0v75_s0"; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + }; > > + }; > > + }; > > + }; > > +}; > > + > > +&u2phy3 { > > + status = "okay"; > > +}; > > + > > +&u2phy3_host { > > + phy-supply = <&vcc5v0_host>; > > + status = "okay"; > > +}; > > + > > +&uart2 { > > + pinctrl-0 = <&uart2m0_xfer>; > > + status = "okay"; > > +}; > > + > > +&usb_host1_ehci { > > + status = "okay"; > > +}; > > + > > +&usb_host1_ohci { > > + status = "okay"; > > +}; > > diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig > b/arch/arm/mach-rockchip/rk3588/Kconfig > > index 39049ab35a..4c14b0be1e 100644 > > --- a/arch/arm/mach-rockchip/rk3588/Kconfig > > +++ b/arch/arm/mach-rockchip/rk3588/Kconfig > > @@ -152,6 +152,31 @@ config TARGET_ROCK5B_RK3588 > > USB PD over USB Type-C > > Size: 100mm x 72mm (Pico-ITX form factor) > > > > +config TARGET_SIGE7_RK3588 > > + bool "ArmSoM Sige7 RK3588 board" > > + select BOARD_LATE_INIT > > + help > > + ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board > Computer) > > + by ArmSoM. > > + > > + There are two variants depending on the DRAM size : 8G and 16G. > > + > > + Specification: > > + > > + Rockchip Rk3588 SoC > > + 4x ARM Cortex-A76, 4x ARM Cortex-A55 > > + 8/16GB memory LPDDR4x > > + Mali G610MC4 GPU > > + 2x MIPI CSI 2 multiple lanes connector > > + 64GB/128GB on board eMMC > > + uSD slot > > + 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C > > + 1x HDMI 2.1 output > > + 2x 2.5 Gbps Ethernet port > > + 40-pin IO header including UART, SPI and I2C > > + USB PD over USB Type-C > > + Size: 92mm x 62mm > > + > > config TARGET_QUARTZPRO64_RK3588 > > bool "Pine64 QuartzPro64 RK3588 board" > > select BOARD_LATE_INIT > > @@ -221,6 +246,7 @@ config ROCKCHIP_COMMON_STACK_ADDR > > config TEXT_BASE > > default 0x00a00000 > > > > +source "board/armsom/sige7-rk3588/Kconfig" > > source "board/edgeble/neural-compute-module-6/Kconfig" > > source "board/friendlyelec/nanopc-t6-rk3588/Kconfig" > > source "board/pine64/quartzpro64-rk3588/Kconfig" > > diff --git a/board/armsom/sige7-rk3588/Kconfig > b/board/armsom/sige7-rk3588/Kconfig > > new file mode 100644 > > index 0000000000..793985f531 > > --- /dev/null > > +++ b/board/armsom/sige7-rk3588/Kconfig > > @@ -0,0 +1,12 @@ > > +if TARGET_SIGE7_RK3588 > > + > > +config SYS_BOARD > > + default "sige7-rk3588" > > + > > +config SYS_VENDOR > > + default "armsom" > > + > > +config SYS_CONFIG_NAME > > + default "sige7-rk3588" > > + > > +endif > > diff --git a/board/armsom/sige7-rk3588/MAINTAINERS > b/board/armsom/sige7-rk3588/MAINTAINERS > > new file mode 100644 > > index 0000000000..0b84946284 > > --- /dev/null > > +++ b/board/armsom/sige7-rk3588/MAINTAINERS > > @@ -0,0 +1,8 @@ > > +SIGE7-RK3588 > > +M: Jianfeng Liu <liujianfeng1994@gmail.com> > > +S: Maintained > > +F: board/armsom/sige7-rk3588 > > +F: include/configs/sige7-rk3588.h > > +F: configs/sige7-rk3588_defconfig > > +F: arch/arm/dts/rk3588-armsom-sige7.dts > > +F: arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi > > I would recommend using > arch/arm/dts/rk3588-armsom-sige7* here instead, as to not have to > maintain a list of DTSes (e.g. if overlays are supported one day?) > > > diff --git a/configs/sige7-rk3588_defconfig > b/configs/sige7-rk3588_defconfig > > new file mode 100644 > > index 0000000000..76fcd2878c > > --- /dev/null > > +++ b/configs/sige7-rk3588_defconfig > > @@ -0,0 +1,104 @@ > > +CONFIG_ARM=y > > +CONFIG_SKIP_LOWLEVEL_INIT=y > > +CONFIG_SYS_HAS_NONCACHED_MEMORY=y > > +CONFIG_COUNTER_FREQUENCY=24000000 > > +CONFIG_ARCH_ROCKCHIP=y > > +CONFIG_SF_DEFAULT_SPEED=24000000 > > +CONFIG_SF_DEFAULT_MODE=0x2000 > > +CONFIG_DEFAULT_DEVICE_TREE="rk3588-armsom-sige7" > > +CONFIG_ROCKCHIP_RK3588=y > > +CONFIG_ROCKCHIP_SPI_IMAGE=y > > The wiki doesn't seem to indicate there's any SPI flash on that device > so I don't think we need to support anything related to it, especially > the creation of the image to flash on an SPI nor? > > > +CONFIG_SPL_SERIAL=y > > +CONFIG_TARGET_SIGE7_RK3588=y > > +CONFIG_DEBUG_UART_BASE=0xFEB50000 > > +CONFIG_DEBUG_UART_CLOCK=24000000 > > +CONFIG_SPL_SPI_FLASH_SUPPORT=y > > +CONFIG_SPL_SPI=y > > +CONFIG_SYS_LOAD_ADDR=0xc00800 > > +CONFIG_PCI=y > > +CONFIG_DEBUG_UART=y > > +CONFIG_AHCI=y > > +CONFIG_FIT=y > > +CONFIG_FIT_VERBOSE=y > > +CONFIG_SPL_FIT_SIGNATURE=y > > +CONFIG_SPL_LOAD_FIT=y > > +CONFIG_LEGACY_IMAGE_FORMAT=y > > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-armsom-sige7.dtb" > > +# CONFIG_DISPLAY_CPUINFO is not set > > +CONFIG_DISPLAY_BOARDINFO_LATE=y > > +CONFIG_SPL_MAX_SIZE=0x40000 > > +CONFIG_SPL_PAD_TO=0x7f8000 > > +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set > > +CONFIG_SPL_SPI_LOAD=y > > +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 > > +CONFIG_SPL_ATF=y > > +CONFIG_CMD_GPIO=y > > +CONFIG_CMD_GPT=y > > +CONFIG_CMD_I2C=y > > +CONFIG_CMD_MMC=y > > +CONFIG_CMD_PCI=y > > +CONFIG_CMD_USB=y > > +CONFIG_CMD_ROCKUSB=y > > +# CONFIG_CMD_SETEXPR is not set > > +CONFIG_CMD_REGULATOR=y > > +# CONFIG_SPL_DOS_PARTITION is not set > > +CONFIG_SPL_OF_CONTROL=y > > +CONFIG_OF_LIVE=y > > +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent > assigned-clocks assigned-clock-rates assigned-clock-parents" > > +CONFIG_SPL_DM_SEQ_ALIAS=y > > +CONFIG_SPL_REGMAP=y > > +CONFIG_SPL_SYSCON=y > > +CONFIG_AHCI_PCI=y > > +CONFIG_DWC_AHCI=y > > +CONFIG_SPL_CLK=y > > +# CONFIG_USB_FUNCTION_FASTBOOT is not set > > +CONFIG_ROCKCHIP_GPIO=y > > +CONFIG_SYS_I2C_ROCKCHIP=y > > +CONFIG_MISC=y > > +CONFIG_SUPPORT_EMMC_RPMB=y > > +CONFIG_MMC_DW=y > > +CONFIG_MMC_DW_ROCKCHIP=y > > +CONFIG_MMC_SDHCI=y > > +CONFIG_MMC_SDHCI_SDMA=y > > +CONFIG_MMC_SDHCI_ROCKCHIP=y > > +CONFIG_SF_DEFAULT_BUS=5 > > +CONFIG_SPI_FLASH_SFDP_SUPPORT=y > > +CONFIG_SPI_FLASH_MACRONIX=y > > +CONFIG_SPI_FLASH_XTX=y > > Ditto. > > > +CONFIG_PHYLIB=y > > +CONFIG_RTL8169=y > > +CONFIG_NVME_PCI=y > > +CONFIG_PCIE_DW_ROCKCHIP=y > > +CONFIG_PHY_ROCKCHIP_INNO_USB2=y > > +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y > > +CONFIG_PHY_ROCKCHIP_USBDP=y > > +CONFIG_SPL_PINCTRL=y > > +CONFIG_PWM_ROCKCHIP=y > > +CONFIG_SPL_RAM=y > > +CONFIG_SCSI=y > > +CONFIG_BAUDRATE=1500000 > > +CONFIG_DEBUG_UART_SHIFT=2 > > +CONFIG_SYS_NS16550_MEM32=y > > +CONFIG_ROCKCHIP_SFC=y > > Ditto. > > > +CONFIG_SYSRESET=y > > +CONFIG_USB=y > > +CONFIG_USB_XHCI_HCD=y > > +CONFIG_USB_EHCI_HCD=y > > +CONFIG_USB_EHCI_GENERIC=y > > +CONFIG_USB_OHCI_HCD=y > > +CONFIG_USB_OHCI_GENERIC=y > > +CONFIG_USB_DWC3=y > > +CONFIG_USB_DWC3_GENERIC=y > > +CONFIG_SPL_USB_DWC3_GENERIC=y > > +CONFIG_USB_HOST_ETHER=y > > +CONFIG_USB_ETHER_ASIX=y > > +CONFIG_USB_ETHER_ASIX88179=y > > +CONFIG_USB_ETHER_LAN75XX=y > > +CONFIG_USB_ETHER_LAN78XX=y > > +CONFIG_USB_ETHER_MCS7830=y > > +CONFIG_USB_ETHER_RTL8152=y > > +CONFIG_USB_ETHER_SMSC95XX=y > > I'm surprised to see USB_ETHER support here? Is this something done on > purpose? The board already has two 2.5Gbps Ethernet, are they not working? > > Cheers, > Quentin >
Hi Jianfeng, On 2024/5/5 01:05, Jianfeng Liu wrote: > ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by > ArmSoM. > > There are two variants depending on the DRAM size : 8G and 16G. > > Specification: > > Rockchip Rk3588 SoC > 4x ARM Cortex-A76, 4x ARM Cortex-A55 > 8/16GB memory LPDDR4x > Mali G610MC4 GPU > 2x MIPI CSI 2 multiple lanes connector > 64GB/128GB on board eMMC > uSD slot > 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C > 1x HDMI 2.1 output > 2x 2.5 Gbps Ethernet port > 40-pin IO header including UART, SPI and I2C > USB PD over USB Type-C > Size: 92mm x 62mm > > Kernel commit: > 81c828a67c78 (arm64: dts: rockchip: Add ArmSom Sige7 board) > > Note that these commits: > - e18e5e8188f2 (arm64: dts: rockchip: add USBDP phys on rk3588) > - 6fca4edb93d3 (arm64: dts: rockchip: Add rk3588 GPU node) > are not synced to u-boot, so I remove usb3 drd nodes and gpu from kernel > devicetree. > > Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> > --- > > MAINTAINERS | 1 + > arch/arm/dts/Makefile | 1 + > arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi | 31 + > arch/arm/dts/rk3588-armsom-sige7.dts | 691 +++++++++++++++++++ We have enable OF_UPSTREAM which is using dts from dts/upstream/src/arm64/rockchip/, please update to use OF_UPSTREAM so that we will easy to keep sync the dts. Thanks, - Kever > arch/arm/mach-rockchip/rk3588/Kconfig | 26 + > board/armsom/sige7-rk3588/Kconfig | 12 + > board/armsom/sige7-rk3588/MAINTAINERS | 8 + > configs/sige7-rk3588_defconfig | 104 +++ > doc/board/rockchip/rockchip.rst | 1 + > include/configs/sige7-rk3588.h | 15 + > 10 files changed, 890 insertions(+) > create mode 100644 arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi > create mode 100644 arch/arm/dts/rk3588-armsom-sige7.dts > create mode 100644 board/armsom/sige7-rk3588/Kconfig > create mode 100644 board/armsom/sige7-rk3588/MAINTAINERS > create mode 100644 configs/sige7-rk3588_defconfig > create mode 100644 include/configs/sige7-rk3588.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 7a3b4d3712..52367bf38c 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -532,6 +532,7 @@ F: arch/arm/dts/rv11* > F: arch/arm/include/asm/arch-rockchip/ > F: arch/arm/mach-rockchip/ > F: board/amarula/vyasa-rk3288/ > +F: board/armsom/sige7-rk3588/ > F: board/anbernic/rgxx3_rk3566/ > F: board/chipspark/popmetal_rk3288 > F: board/engicam/px30_core/ > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index c9f1b25ad6..040238dede 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -166,6 +166,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \ > rk3568-rock-3a.dtb > > dtb-$(CONFIG_ROCKCHIP_RK3588) += \ > + rk3588-armsom-sige7.dtb \ > rk3588s-coolpi-4b.dtb \ > rk3588-coolpi-cm5-evb.dtb \ > rk3588-edgeble-neu6a-io.dtb \ > diff --git a/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi b/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi > new file mode 100644 > index 0000000000..b9196ba5f5 > --- /dev/null > +++ b/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi > @@ -0,0 +1,31 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2024 ArmSoM Technology Co., Ltd. > + */ > + > +#include "rk3588-u-boot.dtsi" > + > +&sdhci { > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > +}; > + > +&u2phy1 { > + status = "okay"; > +}; > + > +&u2phy1_otg { > + status = "okay"; > +}; > + > +&usbdp_phy1 { > + status = "okay"; > +}; > + > +&usbdp_phy1_u3 { > + status = "okay"; > +}; > + > +&usb_host1_xhci { > + status = "okay"; > +}; > diff --git a/arch/arm/dts/rk3588-armsom-sige7.dts b/arch/arm/dts/rk3588-armsom-sige7.dts > new file mode 100644 > index 0000000000..c7b46536ec > --- /dev/null > +++ b/arch/arm/dts/rk3588-armsom-sige7.dts > @@ -0,0 +1,691 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > +#include "rk3588.dtsi" > + > +/ { > + model = "ArmSoM Sige7"; > + compatible = "armsom,sige7", "rockchip,rk3588"; > + > + aliases { > + mmc0 = &sdhci; > + mmc1 = &sdmmc; > + }; > + > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + analog-sound { > + compatible = "audio-graph-card"; > + dais = <&i2s0_8ch_p0>; > + label = "rk3588-es8316"; > + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hp_detect>; > + routing = "MIC2", "Mic Jack", > + "Headphones", "HPOL", > + "Headphones", "HPOR"; > + widgets = "Microphone", "Mic Jack", > + "Headphone", "Headphones"; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&led_rgb_g>; > + > + led_green: led-0 { > + color = <LED_COLOR_ID_GREEN>; > + function = LED_FUNCTION_STATUS; > + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + > + led_red: led-1 { > + color = <LED_COLOR_ID_RED>; > + function = LED_FUNCTION_STATUS; > + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "none"; > + }; > + }; > + > + fan: pwm-fan { > + compatible = "pwm-fan"; > + cooling-levels = <0 95 145 195 255>; > + fan-supply = <&vcc5v0_sys>; > + pwms = <&pwm1 0 50000 0>; > + #cooling-cells = <2>; > + }; > + > + vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_pcie2x1l2"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + startup-delay-us = <5000>; > + vin-supply = <&vcc_3v3_s3>; > + }; > + > + vcc3v3_pcie30: vcc3v3-pcie30-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; > + regulator-name = "vcc3v3_pcie30"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + startup-delay-us = <5000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_host"; > + regulator-boot-on; > + regulator-always-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + enable-active-high; > + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_sys: vcc5v0-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_1v1_nldo_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + vin-supply = <&vcc5v0_sys>; > + }; > +}; > + > +&combphy0_ps { > + status = "okay"; > +}; > + > +&combphy1_ps { > + status = "okay"; > +}; > + > +&combphy2_psu { > + status = "okay"; > +}; > + > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_big0_s0>; > +}; > + > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_big0_s0>; > +}; > + > +&cpu_b2 { > + cpu-supply = <&vdd_cpu_big1_s0>; > +}; > + > +&cpu_b3 { > + cpu-supply = <&vdd_cpu_big1_s0>; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_lit_s0>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_lit_s0>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_lit_s0>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_lit_s0>; > +}; > + > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0m2_xfer>; > + status = "okay"; > + > + vdd_cpu_big0_s0: regulator@42 { > + compatible = "rockchip,rk8602"; > + reg = <0x42>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu_big0_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <1050000>; > + regulator-ramp-delay = <2300>; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_big1_s0: regulator@43 { > + compatible = "rockchip,rk8603", "rockchip,rk8602"; > + reg = <0x43>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu_big1_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <1050000>; > + regulator-ramp-delay = <2300>; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > +}; > + > +&i2c6 { > + status = "okay"; > + > + hym8563: rtc@51 { > + compatible = "haoyu,hym8563"; > + reg = <0x51>; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <0>; > + clock-output-names = "hym8563"; > + pinctrl-names = "default"; > + pinctrl-0 = <&hym8563_int>; > + wakeup-source; > + }; > +}; > + > +&i2c7 { > + status = "okay"; > + > + es8316: audio-codec@11 { > + compatible = "everest,es8316"; > + reg = <0x11>; > + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; > + assigned-clock-rates = <12288000>; > + clocks = <&cru I2S0_8CH_MCLKOUT>; > + clock-names = "mclk"; > + #sound-dai-cells = <0>; > + > + port { > + es8316_p0_0: endpoint { > + remote-endpoint = <&i2s0_8ch_p0_0>; > + }; > + }; > + }; > +}; > + > +&i2s0_8ch { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s0_lrck > + &i2s0_mclk > + &i2s0_sclk > + &i2s0_sdi0 > + &i2s0_sdo0>; > + status = "okay"; > + > + i2s0_8ch_p0: port { > + i2s0_8ch_p0_0: endpoint { > + dai-format = "i2s"; > + mclk-fs = <256>; > + remote-endpoint = <&es8316_p0_0>; > + }; > + }; > +}; > + > +/* phy1 - right ethernet port */ > +&pcie2x1l0 { > + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +/* phy2 - WiFi */ > +&pcie2x1l1 { > + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +/* phy0 - left ethernet port */ > +&pcie2x1l2 { > + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&pcie30phy { > + status = "okay"; > +}; > + > +&pcie3x4 { > + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; > + vpcie3v3-supply = <&vcc3v3_pcie30>; > + status = "okay"; > +}; > + > +&pinctrl { > + hym8563 { > + hym8563_int: hym8563-int { > + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + leds { > + led_rgb_g: led-rgb-g { > + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + led_rgb_r: led-rgb-r { > + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + sound { > + hp_detect: hp-detect { > + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + usb { > + vcc5v0_host_en: vcc5v0-host-en { > + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&pwm1 { > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&avcc_1v8_s0>; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + no-sdio; > + no-sd; > + non-removable; > + mmc-hs200-1_8v; > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + disable-wp; > + max-frequency = <200000000>; > + no-sdio; > + no-mmc; > + sd-uhs-sdr104; > + vmmc-supply = <&vcc_3v3_s3>; > + vqmmc-supply = <&vccio_sd_s0>; > + status = "okay"; > +}; > + > +&spi2 { > + assigned-clocks = <&cru CLK_SPI2>; > + assigned-clock-rates = <200000000>; > + num-cs = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; > + status = "okay"; > + > + pmic@0 { > + compatible = "rockchip,rk806"; > + spi-max-frequency = <1000000>; > + reg = <0x0>; > + > + interrupt-parent = <&gpio0>; > + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, > + <&rk806_dvs2_null>, <&rk806_dvs3_null>; > + > + system-power-controller; > + > + vcc1-supply = <&vcc5v0_sys>; > + vcc2-supply = <&vcc5v0_sys>; > + vcc3-supply = <&vcc5v0_sys>; > + vcc4-supply = <&vcc5v0_sys>; > + vcc5-supply = <&vcc5v0_sys>; > + vcc6-supply = <&vcc5v0_sys>; > + vcc7-supply = <&vcc5v0_sys>; > + vcc8-supply = <&vcc5v0_sys>; > + vcc9-supply = <&vcc5v0_sys>; > + vcc10-supply = <&vcc5v0_sys>; > + vcc11-supply = <&vcc_2v0_pldo_s3>; > + vcc12-supply = <&vcc5v0_sys>; > + vcc13-supply = <&vcc_1v1_nldo_s3>; > + vcc14-supply = <&vcc_1v1_nldo_s3>; > + vcca-supply = <&vcc5v0_sys>; > + > + rk806_dvs1_null: dvs1-null-pins { > + pins = "gpio_pwrctrl1"; > + function = "pin_fun0"; > + }; > + > + rk806_dvs2_null: dvs2-null-pins { > + pins = "gpio_pwrctrl2"; > + function = "pin_fun0"; > + }; > + > + rk806_dvs3_null: dvs3-null-pins { > + pins = "gpio_pwrctrl3"; > + function = "pin_fun0"; > + }; > + > + regulators { > + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_gpu_s0"; > + regulator-enable-ramp-delay = <400>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_cpu_lit_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_log_s0: dcdc-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <750000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_log_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <750000>; > + }; > + }; > + > + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_vdenc_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_ddr_s0: dcdc-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <900000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_ddr_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <850000>; > + }; > + }; > + > + vdd2_ddr_s3: dcdc-reg6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vdd2_ddr_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_2v0_pldo_s3: dcdc-reg7 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <2000000>; > + regulator-max-microvolt = <2000000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_2v0_pldo_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <2000000>; > + }; > + }; > + > + vcc_3v3_s3: dcdc-reg8 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc_3v3_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vddq_ddr_s0: dcdc-reg9 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vddq_ddr_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v8_s3: dcdc-reg10 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc_1v8_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + avcc_1v8_s0: pldo-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "avcc_1v8_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v8_s0: pldo-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc_1v8_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + avdd_1v2_s0: pldo-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-name = "avdd_1v2_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v3_s0: pldo-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vcc_3v3_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vccio_sd_s0: pldo-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vccio_sd_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + pldo6_s3: pldo-reg6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "pldo6_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vdd_0v75_s3: nldo-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <750000>; > + regulator-name = "vdd_0v75_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <750000>; > + }; > + }; > + > + vdd_ddr_pll_s0: nldo-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <850000>; > + regulator-name = "vdd_ddr_pll_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <850000>; > + }; > + }; > + > + avdd_0v75_s0: nldo-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <750000>; > + regulator-name = "avdd_0v75_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_0v85_s0: nldo-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <850000>; > + regulator-name = "vdd_0v85_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_0v75_s0: nldo-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <750000>; > + regulator-name = "vdd_0v75_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > +}; > + > +&u2phy3 { > + status = "okay"; > +}; > + > +&u2phy3_host { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-0 = <&uart2m0_xfer>; > + status = "okay"; > +}; > + > +&usb_host1_ehci { > + status = "okay"; > +}; > + > +&usb_host1_ohci { > + status = "okay"; > +}; > diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig > index 39049ab35a..4c14b0be1e 100644 > --- a/arch/arm/mach-rockchip/rk3588/Kconfig > +++ b/arch/arm/mach-rockchip/rk3588/Kconfig > @@ -152,6 +152,31 @@ config TARGET_ROCK5B_RK3588 > USB PD over USB Type-C > Size: 100mm x 72mm (Pico-ITX form factor) > > +config TARGET_SIGE7_RK3588 > + bool "ArmSoM Sige7 RK3588 board" > + select BOARD_LATE_INIT > + help > + ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) > + by ArmSoM. > + > + There are two variants depending on the DRAM size : 8G and 16G. > + > + Specification: > + > + Rockchip Rk3588 SoC > + 4x ARM Cortex-A76, 4x ARM Cortex-A55 > + 8/16GB memory LPDDR4x > + Mali G610MC4 GPU > + 2x MIPI CSI 2 multiple lanes connector > + 64GB/128GB on board eMMC > + uSD slot > + 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C > + 1x HDMI 2.1 output > + 2x 2.5 Gbps Ethernet port > + 40-pin IO header including UART, SPI and I2C > + USB PD over USB Type-C > + Size: 92mm x 62mm > + > config TARGET_QUARTZPRO64_RK3588 > bool "Pine64 QuartzPro64 RK3588 board" > select BOARD_LATE_INIT > @@ -221,6 +246,7 @@ config ROCKCHIP_COMMON_STACK_ADDR > config TEXT_BASE > default 0x00a00000 > > +source "board/armsom/sige7-rk3588/Kconfig" > source "board/edgeble/neural-compute-module-6/Kconfig" > source "board/friendlyelec/nanopc-t6-rk3588/Kconfig" > source "board/pine64/quartzpro64-rk3588/Kconfig" > diff --git a/board/armsom/sige7-rk3588/Kconfig b/board/armsom/sige7-rk3588/Kconfig > new file mode 100644 > index 0000000000..793985f531 > --- /dev/null > +++ b/board/armsom/sige7-rk3588/Kconfig > @@ -0,0 +1,12 @@ > +if TARGET_SIGE7_RK3588 > + > +config SYS_BOARD > + default "sige7-rk3588" > + > +config SYS_VENDOR > + default "armsom" > + > +config SYS_CONFIG_NAME > + default "sige7-rk3588" > + > +endif > diff --git a/board/armsom/sige7-rk3588/MAINTAINERS b/board/armsom/sige7-rk3588/MAINTAINERS > new file mode 100644 > index 0000000000..0b84946284 > --- /dev/null > +++ b/board/armsom/sige7-rk3588/MAINTAINERS > @@ -0,0 +1,8 @@ > +SIGE7-RK3588 > +M: Jianfeng Liu <liujianfeng1994@gmail.com> > +S: Maintained > +F: board/armsom/sige7-rk3588 > +F: include/configs/sige7-rk3588.h > +F: configs/sige7-rk3588_defconfig > +F: arch/arm/dts/rk3588-armsom-sige7.dts > +F: arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi > diff --git a/configs/sige7-rk3588_defconfig b/configs/sige7-rk3588_defconfig > new file mode 100644 > index 0000000000..76fcd2878c > --- /dev/null > +++ b/configs/sige7-rk3588_defconfig > @@ -0,0 +1,104 @@ > +CONFIG_ARM=y > +CONFIG_SKIP_LOWLEVEL_INIT=y > +CONFIG_SYS_HAS_NONCACHED_MEMORY=y > +CONFIG_COUNTER_FREQUENCY=24000000 > +CONFIG_ARCH_ROCKCHIP=y > +CONFIG_SF_DEFAULT_SPEED=24000000 > +CONFIG_SF_DEFAULT_MODE=0x2000 > +CONFIG_DEFAULT_DEVICE_TREE="rk3588-armsom-sige7" > +CONFIG_ROCKCHIP_RK3588=y > +CONFIG_ROCKCHIP_SPI_IMAGE=y > +CONFIG_SPL_SERIAL=y > +CONFIG_TARGET_SIGE7_RK3588=y > +CONFIG_DEBUG_UART_BASE=0xFEB50000 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_SPL_SPI_FLASH_SUPPORT=y > +CONFIG_SPL_SPI=y > +CONFIG_SYS_LOAD_ADDR=0xc00800 > +CONFIG_PCI=y > +CONFIG_DEBUG_UART=y > +CONFIG_AHCI=y > +CONFIG_FIT=y > +CONFIG_FIT_VERBOSE=y > +CONFIG_SPL_FIT_SIGNATURE=y > +CONFIG_SPL_LOAD_FIT=y > +CONFIG_LEGACY_IMAGE_FORMAT=y > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-armsom-sige7.dtb" > +# CONFIG_DISPLAY_CPUINFO is not set > +CONFIG_DISPLAY_BOARDINFO_LATE=y > +CONFIG_SPL_MAX_SIZE=0x40000 > +CONFIG_SPL_PAD_TO=0x7f8000 > +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set > +CONFIG_SPL_SPI_LOAD=y > +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 > +CONFIG_SPL_ATF=y > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_GPT=y > +CONFIG_CMD_I2C=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_PCI=y > +CONFIG_CMD_USB=y > +CONFIG_CMD_ROCKUSB=y > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_CMD_REGULATOR=y > +# CONFIG_SPL_DOS_PARTITION is not set > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_OF_LIVE=y > +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > +CONFIG_SPL_DM_SEQ_ALIAS=y > +CONFIG_SPL_REGMAP=y > +CONFIG_SPL_SYSCON=y > +CONFIG_AHCI_PCI=y > +CONFIG_DWC_AHCI=y > +CONFIG_SPL_CLK=y > +# CONFIG_USB_FUNCTION_FASTBOOT is not set > +CONFIG_ROCKCHIP_GPIO=y > +CONFIG_SYS_I2C_ROCKCHIP=y > +CONFIG_MISC=y > +CONFIG_SUPPORT_EMMC_RPMB=y > +CONFIG_MMC_DW=y > +CONFIG_MMC_DW_ROCKCHIP=y > +CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_SDMA=y > +CONFIG_MMC_SDHCI_ROCKCHIP=y > +CONFIG_SF_DEFAULT_BUS=5 > +CONFIG_SPI_FLASH_SFDP_SUPPORT=y > +CONFIG_SPI_FLASH_MACRONIX=y > +CONFIG_SPI_FLASH_XTX=y > +CONFIG_PHYLIB=y > +CONFIG_RTL8169=y > +CONFIG_NVME_PCI=y > +CONFIG_PCIE_DW_ROCKCHIP=y > +CONFIG_PHY_ROCKCHIP_INNO_USB2=y > +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y > +CONFIG_PHY_ROCKCHIP_USBDP=y > +CONFIG_SPL_PINCTRL=y > +CONFIG_PWM_ROCKCHIP=y > +CONFIG_SPL_RAM=y > +CONFIG_SCSI=y > +CONFIG_BAUDRATE=1500000 > +CONFIG_DEBUG_UART_SHIFT=2 > +CONFIG_SYS_NS16550_MEM32=y > +CONFIG_ROCKCHIP_SFC=y > +CONFIG_SYSRESET=y > +CONFIG_USB=y > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_EHCI_GENERIC=y > +CONFIG_USB_OHCI_HCD=y > +CONFIG_USB_OHCI_GENERIC=y > +CONFIG_USB_DWC3=y > +CONFIG_USB_DWC3_GENERIC=y > +CONFIG_SPL_USB_DWC3_GENERIC=y > +CONFIG_USB_HOST_ETHER=y > +CONFIG_USB_ETHER_ASIX=y > +CONFIG_USB_ETHER_ASIX88179=y > +CONFIG_USB_ETHER_LAN75XX=y > +CONFIG_USB_ETHER_LAN78XX=y > +CONFIG_USB_ETHER_MCS7830=y > +CONFIG_USB_ETHER_RTL8152=y > +CONFIG_USB_ETHER_SMSC95XX=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_DOWNLOAD=y > +CONFIG_USB_FUNCTION_ROCKUSB=y > +CONFIG_ERRNO_STR=y > diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst > index 9a726e9cde..6b826b3288 100644 > --- a/doc/board/rockchip/rockchip.rst > +++ b/doc/board/rockchip/rockchip.rst > @@ -118,6 +118,7 @@ List of mainline supported Rockchip boards: > - Radxa ROCK 3 Model A (rock-3a-rk3568) > > * rk3588 > + - ArmSoM Sige7 (sige7-rk3588) > - Rockchip EVB (evb-rk3588) > - Edgeble Neural Compute Module 6A SoM - Neu6a (neu6a-io-rk3588) > - Edgeble Neural Compute Module 6B SoM - Neu6b (neu6b-io-rk3588) > diff --git a/include/configs/sige7-rk3588.h b/include/configs/sige7-rk3588.h > new file mode 100644 > index 0000000000..fd08da568b > --- /dev/null > +++ b/include/configs/sige7-rk3588.h > @@ -0,0 +1,15 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (c) 2024 ArmSoM Technology Co., Ltd. > + */ > + > +#ifndef __SIGE7_RK3588_H > +#define __SIGE7_RK3588_H > + > +#define ROCKCHIP_DEVICE_SETTINGS \ > + "stdout=serial,vidconsole\0" \ > + "stderr=serial,vidconsole\0" > + > +#include <configs/rk3588_common.h> > + > +#endif /* __SIGE7_RK3588_H */
diff --git a/MAINTAINERS b/MAINTAINERS index 7a3b4d3712..52367bf38c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -532,6 +532,7 @@ F: arch/arm/dts/rv11* F: arch/arm/include/asm/arch-rockchip/ F: arch/arm/mach-rockchip/ F: board/amarula/vyasa-rk3288/ +F: board/armsom/sige7-rk3588/ F: board/anbernic/rgxx3_rk3566/ F: board/chipspark/popmetal_rk3288 F: board/engicam/px30_core/ diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index c9f1b25ad6..040238dede 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -166,6 +166,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \ rk3568-rock-3a.dtb dtb-$(CONFIG_ROCKCHIP_RK3588) += \ + rk3588-armsom-sige7.dtb \ rk3588s-coolpi-4b.dtb \ rk3588-coolpi-cm5-evb.dtb \ rk3588-edgeble-neu6a-io.dtb \ diff --git a/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi b/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi new file mode 100644 index 0000000000..b9196ba5f5 --- /dev/null +++ b/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 ArmSoM Technology Co., Ltd. + */ + +#include "rk3588-u-boot.dtsi" + +&sdhci { + cap-mmc-highspeed; + mmc-hs200-1_8v; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&usbdp_phy1 { + status = "okay"; +}; + +&usbdp_phy1_u3 { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; diff --git a/arch/arm/dts/rk3588-armsom-sige7.dts b/arch/arm/dts/rk3588-armsom-sige7.dts new file mode 100644 index 0000000000..c7b46536ec --- /dev/null +++ b/arch/arm/dts/rk3588-armsom-sige7.dts @@ -0,0 +1,691 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "rk3588.dtsi" + +/ { + model = "ArmSoM Sige7"; + compatible = "armsom,sige7", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + analog-sound { + compatible = "audio-graph-card"; + dais = <&i2s0_8ch_p0>; + label = "rk3588-es8316"; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_rgb_g>; + + led_green: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led_red: led-1 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 95 145 195 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm1 0 50000 0>; + #cooling-cells = <2>; + }; + + vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie2x1l2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +/* phy1 - right ethernet port */ +&pcie2x1l0 { + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* phy2 - WiFi */ +&pcie2x1l1 { + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* phy0 - left ethernet port */ +&pcie2x1l2 { + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_rgb_g: led-rgb-g { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led_rgb_r: led-rgb-r { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + mmc-hs200-1_8v; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <200000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig index 39049ab35a..4c14b0be1e 100644 --- a/arch/arm/mach-rockchip/rk3588/Kconfig +++ b/arch/arm/mach-rockchip/rk3588/Kconfig @@ -152,6 +152,31 @@ config TARGET_ROCK5B_RK3588 USB PD over USB Type-C Size: 100mm x 72mm (Pico-ITX form factor) +config TARGET_SIGE7_RK3588 + bool "ArmSoM Sige7 RK3588 board" + select BOARD_LATE_INIT + help + ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) + by ArmSoM. + + There are two variants depending on the DRAM size : 8G and 16G. + + Specification: + + Rockchip Rk3588 SoC + 4x ARM Cortex-A76, 4x ARM Cortex-A55 + 8/16GB memory LPDDR4x + Mali G610MC4 GPU + 2x MIPI CSI 2 multiple lanes connector + 64GB/128GB on board eMMC + uSD slot + 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C + 1x HDMI 2.1 output + 2x 2.5 Gbps Ethernet port + 40-pin IO header including UART, SPI and I2C + USB PD over USB Type-C + Size: 92mm x 62mm + config TARGET_QUARTZPRO64_RK3588 bool "Pine64 QuartzPro64 RK3588 board" select BOARD_LATE_INIT @@ -221,6 +246,7 @@ config ROCKCHIP_COMMON_STACK_ADDR config TEXT_BASE default 0x00a00000 +source "board/armsom/sige7-rk3588/Kconfig" source "board/edgeble/neural-compute-module-6/Kconfig" source "board/friendlyelec/nanopc-t6-rk3588/Kconfig" source "board/pine64/quartzpro64-rk3588/Kconfig" diff --git a/board/armsom/sige7-rk3588/Kconfig b/board/armsom/sige7-rk3588/Kconfig new file mode 100644 index 0000000000..793985f531 --- /dev/null +++ b/board/armsom/sige7-rk3588/Kconfig @@ -0,0 +1,12 @@ +if TARGET_SIGE7_RK3588 + +config SYS_BOARD + default "sige7-rk3588" + +config SYS_VENDOR + default "armsom" + +config SYS_CONFIG_NAME + default "sige7-rk3588" + +endif diff --git a/board/armsom/sige7-rk3588/MAINTAINERS b/board/armsom/sige7-rk3588/MAINTAINERS new file mode 100644 index 0000000000..0b84946284 --- /dev/null +++ b/board/armsom/sige7-rk3588/MAINTAINERS @@ -0,0 +1,8 @@ +SIGE7-RK3588 +M: Jianfeng Liu <liujianfeng1994@gmail.com> +S: Maintained +F: board/armsom/sige7-rk3588 +F: include/configs/sige7-rk3588.h +F: configs/sige7-rk3588_defconfig +F: arch/arm/dts/rk3588-armsom-sige7.dts +F: arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi diff --git a/configs/sige7-rk3588_defconfig b/configs/sige7-rk3588_defconfig new file mode 100644 index 0000000000..76fcd2878c --- /dev/null +++ b/configs/sige7-rk3588_defconfig @@ -0,0 +1,104 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SF_DEFAULT_SPEED=24000000 +CONFIG_SF_DEFAULT_MODE=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="rk3588-armsom-sige7" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_ROCKCHIP_SPI_IMAGE=y +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_SIGE7_RK3588=y +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-armsom-sige7.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_AHCI_PCI=y +CONFIG_DWC_AHCI=y +CONFIG_SPL_CLK=y +# CONFIG_USB_FUNCTION_FASTBOOT is not set +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SF_DEFAULT_BUS=5 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_XTX=y +CONFIG_PHYLIB=y +CONFIG_RTL8169=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_SPL_PINCTRL=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_SCSI=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SFC=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_SPL_USB_DWC3_GENERIC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_LAN75XX=y +CONFIG_USB_ETHER_LAN78XX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_ERRNO_STR=y diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 9a726e9cde..6b826b3288 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -118,6 +118,7 @@ List of mainline supported Rockchip boards: - Radxa ROCK 3 Model A (rock-3a-rk3568) * rk3588 + - ArmSoM Sige7 (sige7-rk3588) - Rockchip EVB (evb-rk3588) - Edgeble Neural Compute Module 6A SoM - Neu6a (neu6a-io-rk3588) - Edgeble Neural Compute Module 6B SoM - Neu6b (neu6b-io-rk3588) diff --git a/include/configs/sige7-rk3588.h b/include/configs/sige7-rk3588.h new file mode 100644 index 0000000000..fd08da568b --- /dev/null +++ b/include/configs/sige7-rk3588.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2024 ArmSoM Technology Co., Ltd. + */ + +#ifndef __SIGE7_RK3588_H +#define __SIGE7_RK3588_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include <configs/rk3588_common.h> + +#endif /* __SIGE7_RK3588_H */
ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by ArmSoM. There are two variants depending on the DRAM size : 8G and 16G. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 8/16GB memory LPDDR4x Mali G610MC4 GPU 2x MIPI CSI 2 multiple lanes connector 64GB/128GB on board eMMC uSD slot 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C 1x HDMI 2.1 output 2x 2.5 Gbps Ethernet port 40-pin IO header including UART, SPI and I2C USB PD over USB Type-C Size: 92mm x 62mm Kernel commit: 81c828a67c78 (arm64: dts: rockchip: Add ArmSom Sige7 board) Note that these commits: - e18e5e8188f2 (arm64: dts: rockchip: add USBDP phys on rk3588) - 6fca4edb93d3 (arm64: dts: rockchip: Add rk3588 GPU node) are not synced to u-boot, so I remove usb3 drd nodes and gpu from kernel devicetree. Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> --- MAINTAINERS | 1 + arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi | 31 + arch/arm/dts/rk3588-armsom-sige7.dts | 691 +++++++++++++++++++ arch/arm/mach-rockchip/rk3588/Kconfig | 26 + board/armsom/sige7-rk3588/Kconfig | 12 + board/armsom/sige7-rk3588/MAINTAINERS | 8 + configs/sige7-rk3588_defconfig | 104 +++ doc/board/rockchip/rockchip.rst | 1 + include/configs/sige7-rk3588.h | 15 + 10 files changed, 890 insertions(+) create mode 100644 arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588-armsom-sige7.dts create mode 100644 board/armsom/sige7-rk3588/Kconfig create mode 100644 board/armsom/sige7-rk3588/MAINTAINERS create mode 100644 configs/sige7-rk3588_defconfig create mode 100644 include/configs/sige7-rk3588.h