diff mbox series

[25/31] rockchip: rk3399-nanopi-4: Sync device tree from linux v6.8

Message ID 20240331202921.262323-26-jonas@kwiboo.se
State Changes Requested
Delegated to: Kever Yang
Headers show
Series rockchip: rk3399: Sync DT with linux v6.8 and update defconfigs | expand

Commit Message

Jonas Karlman March 31, 2024, 8:28 p.m. UTC 
Sync rk3399-nanopi-4 related device tree from linux v6.8.

Add DM_RESET=y to support reset signals.

Add PCI=y, CMD_PCI=y and NVME_PCI=y to support PCIe and NVMe boot.

Add AHCI=y, SCSI_AHCI=y, AHCI_PCI=y and SCSI=y to support PCIe SATA boot.

Add ROCKCHIP_IODOMAIN=y to configure io-domain voltage.

Add MMC_SDHCI_SDMA=y to use DMA transfer for eMMC.

Add PHY_REALTEK=y and DM_ETH_PHY=y to support ethernet PHY.

Add PHY_ROCKCHIP_INNO_USB2=y and PHY_ROCKCHIP_TYPEC=y to support USB PHY.

Remove REGULATOR_PWM=y, boards does not use pwm-regulator compatible.

Remove SPL_TINY_MEMSET=y to use full memset in SPL.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
 arch/arm/dts/rk3399-nanopc-t4.dts       |  2 +-
 arch/arm/dts/rk3399-nanopi-m4-2gb.dts   | 55 +------------------------
 arch/arm/dts/rk3399-nanopi-m4b.dts      |  2 +-
 arch/arm/dts/rk3399-nanopi-r4s.dts      |  4 +-
 arch/arm/dts/rk3399-nanopi4-u-boot.dtsi |  4 ++
 arch/arm/dts/rk3399-nanopi4.dtsi        |  7 ++--
 configs/nanopc-t4-rk3399_defconfig      | 14 +++++--
 configs/nanopi-m4-2gb-rk3399_defconfig  | 18 ++++++--
 configs/nanopi-m4-rk3399_defconfig      | 18 ++++++--
 configs/nanopi-m4b-rk3399_defconfig     | 18 ++++++--
 configs/nanopi-neo4-rk3399_defconfig    | 18 ++++++--
 configs/nanopi-r4s-rk3399_defconfig     | 12 +++---
 12 files changed, 91 insertions(+), 81 deletions(-)

Comments

Kever Yang April 23, 2024, 11:12 a.m. UTC | #1 
On 2024/4/1 04:28, Jonas Karlman wrote:
> Sync rk3399-nanopi-4 related device tree from linux v6.8.
>
> Add DM_RESET=y to support reset signals.
>
> Add PCI=y, CMD_PCI=y and NVME_PCI=y to support PCIe and NVMe boot.
>
> Add AHCI=y, SCSI_AHCI=y, AHCI_PCI=y and SCSI=y to support PCIe SATA boot.
>
> Add ROCKCHIP_IODOMAIN=y to configure io-domain voltage.
>
> Add MMC_SDHCI_SDMA=y to use DMA transfer for eMMC.
>
> Add PHY_REALTEK=y and DM_ETH_PHY=y to support ethernet PHY.
>
> Add PHY_ROCKCHIP_INNO_USB2=y and PHY_ROCKCHIP_TYPEC=y to support USB PHY.
>
> Remove REGULATOR_PWM=y, boards does not use pwm-regulator compatible.
>
> Remove SPL_TINY_MEMSET=y to use full memset in SPL.
>
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Thanks,
- Kever
> ---
>   arch/arm/dts/rk3399-nanopc-t4.dts       |  2 +-
>   arch/arm/dts/rk3399-nanopi-m4-2gb.dts   | 55 +------------------------
>   arch/arm/dts/rk3399-nanopi-m4b.dts      |  2 +-
>   arch/arm/dts/rk3399-nanopi-r4s.dts      |  4 +-
>   arch/arm/dts/rk3399-nanopi4-u-boot.dtsi |  4 ++
>   arch/arm/dts/rk3399-nanopi4.dtsi        |  7 ++--
>   configs/nanopc-t4-rk3399_defconfig      | 14 +++++--
>   configs/nanopi-m4-2gb-rk3399_defconfig  | 18 ++++++--
>   configs/nanopi-m4-rk3399_defconfig      | 18 ++++++--
>   configs/nanopi-m4b-rk3399_defconfig     | 18 ++++++--
>   configs/nanopi-neo4-rk3399_defconfig    | 18 ++++++--
>   configs/nanopi-r4s-rk3399_defconfig     | 12 +++---
>   12 files changed, 91 insertions(+), 81 deletions(-)
>
> diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
> index 452728b82e42..3bf8f959e42c 100644
> --- a/arch/arm/dts/rk3399-nanopc-t4.dts
> +++ b/arch/arm/dts/rk3399-nanopc-t4.dts
> @@ -39,7 +39,7 @@
>   		keyup-threshold-microvolt = <1800000>;
>   		poll-interval = <100>;
>   
> -		recovery {
> +		button-recovery {
>   			label = "Recovery";
>   			linux,code = <KEY_VENDOR>;
>   			press-threshold-microvolt = <18000>;
> diff --git a/arch/arm/dts/rk3399-nanopi-m4-2gb.dts b/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
> index 60358ab8c7df..e9cf71f224a3 100644
> --- a/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
> +++ b/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
> @@ -10,57 +10,4 @@
>    */
>   
>   /dts-v1/;
> -#include "rk3399-nanopi4.dtsi"
> -
> -/ {
> -	model = "FriendlyElec NanoPi M4";
> -	compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
> -
> -	vdd_5v: vdd-5v {
> -		compatible = "regulator-fixed";
> -		regulator-name = "vdd_5v";
> -		regulator-always-on;
> -		regulator-boot-on;
> -	};
> -
> -	vcc5v0_core: vcc5v0-core {
> -		compatible = "regulator-fixed";
> -		regulator-name = "vcc5v0_core";
> -		regulator-always-on;
> -		regulator-boot-on;
> -		vin-supply = <&vdd_5v>;
> -	};
> -
> -	vcc5v0_usb1: vcc5v0-usb1 {
> -		compatible = "regulator-fixed";
> -		regulator-name = "vcc5v0_usb1";
> -		regulator-always-on;
> -		regulator-boot-on;
> -		vin-supply = <&vcc5v0_sys>;
> -	};
> -
> -	vcc5v0_usb2: vcc5v0-usb2 {
> -		compatible = "regulator-fixed";
> -		regulator-name = "vcc5v0_usb2";
> -		regulator-always-on;
> -		regulator-boot-on;
> -		vin-supply = <&vcc5v0_sys>;
> -	};
> -};
> -
> -&vcc3v3_sys {
> -	vin-supply = <&vcc5v0_core>;
> -};
> -
> -&u2phy0_host {
> -	phy-supply = <&vcc5v0_usb1>;
> -};
> -
> -&u2phy1_host {
> -	phy-supply = <&vcc5v0_usb2>;
> -};
> -
> -&vbus_typec {
> -	regulator-always-on;
> -	vin-supply = <&vdd_5v>;
> -};
> +#include "rk3399-nanopi-m4.dts"
> diff --git a/arch/arm/dts/rk3399-nanopi-m4b.dts b/arch/arm/dts/rk3399-nanopi-m4b.dts
> index 72182c58cc46..65cb21837b0c 100644
> --- a/arch/arm/dts/rk3399-nanopi-m4b.dts
> +++ b/arch/arm/dts/rk3399-nanopi-m4b.dts
> @@ -19,7 +19,7 @@
>   		keyup-threshold-microvolt = <1500000>;
>   		poll-interval = <100>;
>   
> -		recovery {
> +		button-recovery {
>   			label = "Recovery";
>   			linux,code = <KEY_VENDOR>;
>   			press-threshold-microvolt = <18000>;
> diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
> index cef4d18b599d..fe5b52610010 100644
> --- a/arch/arm/dts/rk3399-nanopi-r4s.dts
> +++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
> @@ -46,9 +46,9 @@
>   	gpio-keys {
>   		pinctrl-0 = <&reset_button_pin>;
>   
> -		/delete-node/ power;
> +		/delete-node/ key-power;
>   
> -		reset {
> +		key-reset {
>   			debounce-interval = <50>;
>   			gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
>   			label = "reset";
> diff --git a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
> index e0d7a518dfc2..757361249968 100644
> --- a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
> +++ b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
> @@ -20,3 +20,7 @@
>   &vcc3v0_sd {
>   	bootph-pre-ram;
>   };
> +
> +&vcc_sdio {
> +	regulator-init-microvolt = <3000000>;
> +};
> diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
> index 8c0ff6c96e03..b7f1e47978a6 100644
> --- a/arch/arm/dts/rk3399-nanopi4.dtsi
> +++ b/arch/arm/dts/rk3399-nanopi4.dtsi
> @@ -18,6 +18,7 @@
>   
>   / {
>   	aliases {
> +		ethernet0 = &gmac;
>   		mmc0 = &sdio0;
>   		mmc1 = &sdmmc;
>   		mmc2 = &sdhci;
> @@ -111,7 +112,7 @@
>   		pinctrl-names = "default";
>   		pinctrl-0 = <&power_key>;
>   
> -		power {
> +		key-power {
>   			debounce-interval = <100>;
>   			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
>   			label = "GPIO Key Power";
> @@ -167,6 +168,7 @@
>   };
>   
>   &emmc_phy {
> +	rockchip,enable-strobe-pulldown;
>   	status = "okay";
>   };
>   
> @@ -267,7 +269,7 @@
>   		interrupt-parent = <&gpio1>;
>   		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
>   		pinctrl-names = "default";
> -		pinctrl-0 = <&pmic_int_l>;
> +		pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>;
>   		rockchip,system-power-controller;
>   		wakeup-source;
>   
> @@ -374,7 +376,6 @@
>   			vcc_sdio: LDO_REG4 {
>   				regulator-always-on;
>   				regulator-boot-on;
> -				regulator-init-microvolt = <3000000>;
>   				regulator-min-microvolt = <1800000>;
>   				regulator-max-microvolt = <3300000>;
>   				regulator-name = "vcc_sdio";
> diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
> index 89c36e273a9b..93d163b70f4f 100644
> --- a/configs/nanopc-t4-rk3399_defconfig
> +++ b/configs/nanopc-t4-rk3399_defconfig
> @@ -14,9 +14,10 @@ CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0x800800
>   CONFIG_PCI=y
>   CONFIG_DEBUG_UART=y
> +CONFIG_AHCI=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_SPL_MAX_SIZE=0x2e000
> +CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
>   CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> @@ -32,20 +33,28 @@ CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
>   CONFIG_ENV_IS_IN_MMC=y
>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SCSI_AHCI=y
> +CONFIG_AHCI_PCI=y
>   CONFIG_ROCKCHIP_GPIO=y
>   CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_ROCKCHIP_IODOMAIN=y
>   CONFIG_MMC_DW=y
>   CONFIG_MMC_DW_ROCKCHIP=y
>   CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_SDMA=y
>   CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH_PHY=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
>   CONFIG_NVME_PCI=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_TYPEC=y
>   CONFIG_PMIC_RK8XX=y
> -CONFIG_REGULATOR_PWM=y
>   CONFIG_SPL_DM_REGULATOR_FIXED=y
>   CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y
> +CONFIG_SCSI=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_SYS_NS16550_MEM32=y
> @@ -68,5 +77,4 @@ CONFIG_VIDEO=y
>   CONFIG_DISPLAY=y
>   CONFIG_VIDEO_ROCKCHIP=y
>   CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> -CONFIG_SPL_TINY_MEMSET=y
>   CONFIG_ERRNO_STR=y
> diff --git a/configs/nanopi-m4-2gb-rk3399_defconfig b/configs/nanopi-m4-2gb-rk3399_defconfig
> index eb1d2c1f51fc..10bd9fba5388 100644
> --- a/configs/nanopi-m4-2gb-rk3399_defconfig
> +++ b/configs/nanopi-m4-2gb-rk3399_defconfig
> @@ -6,15 +6,18 @@ CONFIG_SPL_GPIO=y
>   CONFIG_NR_DRAM_BANKS=1
>   CONFIG_ENV_OFFSET=0x3F8000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4-2gb"
> +CONFIG_DM_RESET=y
>   CONFIG_ROCKCHIP_RK3399=y
>   CONFIG_TARGET_EVB_RK3399=y
>   CONFIG_DEBUG_UART_BASE=0xFF1A0000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0x800800
> +CONFIG_PCI=y
>   CONFIG_DEBUG_UART=y
> +CONFIG_AHCI=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4-2gb.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_SPL_MAX_SIZE=0x2e000
> +CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
>   CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> @@ -22,6 +25,7 @@ CONFIG_TPL=y
>   CONFIG_CMD_BOOTZ=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
>   CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
>   CONFIG_CMD_TIME=y
> @@ -29,19 +33,28 @@ CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
>   CONFIG_ENV_IS_IN_MMC=y
>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SCSI_AHCI=y
> +CONFIG_AHCI_PCI=y
>   CONFIG_ROCKCHIP_GPIO=y
>   CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_ROCKCHIP_IODOMAIN=y
>   CONFIG_MMC_DW=y
>   CONFIG_MMC_DW_ROCKCHIP=y
>   CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_SDMA=y
>   CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH_PHY=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_NVME_PCI=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_TYPEC=y
>   CONFIG_PMIC_RK8XX=y
> -CONFIG_REGULATOR_PWM=y
>   CONFIG_SPL_DM_REGULATOR_FIXED=y
>   CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y
> +CONFIG_SCSI=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_SYS_NS16550_MEM32=y
> @@ -63,5 +76,4 @@ CONFIG_VIDEO=y
>   CONFIG_DISPLAY=y
>   CONFIG_VIDEO_ROCKCHIP=y
>   CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> -CONFIG_SPL_TINY_MEMSET=y
>   CONFIG_ERRNO_STR=y
> diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
> index bc0b90b3d861..f5305549716c 100644
> --- a/configs/nanopi-m4-rk3399_defconfig
> +++ b/configs/nanopi-m4-rk3399_defconfig
> @@ -6,15 +6,18 @@ CONFIG_SPL_GPIO=y
>   CONFIG_NR_DRAM_BANKS=1
>   CONFIG_ENV_OFFSET=0x3F8000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4"
> +CONFIG_DM_RESET=y
>   CONFIG_ROCKCHIP_RK3399=y
>   CONFIG_TARGET_EVB_RK3399=y
>   CONFIG_DEBUG_UART_BASE=0xFF1A0000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0x800800
> +CONFIG_PCI=y
>   CONFIG_DEBUG_UART=y
> +CONFIG_AHCI=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_SPL_MAX_SIZE=0x2e000
> +CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
>   CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> @@ -22,6 +25,7 @@ CONFIG_TPL=y
>   CONFIG_CMD_BOOTZ=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
>   CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
>   CONFIG_CMD_TIME=y
> @@ -29,19 +33,28 @@ CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
>   CONFIG_ENV_IS_IN_MMC=y
>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SCSI_AHCI=y
> +CONFIG_AHCI_PCI=y
>   CONFIG_ROCKCHIP_GPIO=y
>   CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_ROCKCHIP_IODOMAIN=y
>   CONFIG_MMC_DW=y
>   CONFIG_MMC_DW_ROCKCHIP=y
>   CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_SDMA=y
>   CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH_PHY=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_NVME_PCI=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_TYPEC=y
>   CONFIG_PMIC_RK8XX=y
> -CONFIG_REGULATOR_PWM=y
>   CONFIG_SPL_DM_REGULATOR_FIXED=y
>   CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y
> +CONFIG_SCSI=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_SYS_NS16550_MEM32=y
> @@ -63,5 +76,4 @@ CONFIG_VIDEO=y
>   CONFIG_DISPLAY=y
>   CONFIG_VIDEO_ROCKCHIP=y
>   CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> -CONFIG_SPL_TINY_MEMSET=y
>   CONFIG_ERRNO_STR=y
> diff --git a/configs/nanopi-m4b-rk3399_defconfig b/configs/nanopi-m4b-rk3399_defconfig
> index 678f4d9d823f..70de7e0a6d7f 100644
> --- a/configs/nanopi-m4b-rk3399_defconfig
> +++ b/configs/nanopi-m4b-rk3399_defconfig
> @@ -6,15 +6,18 @@ CONFIG_SPL_GPIO=y
>   CONFIG_NR_DRAM_BANKS=1
>   CONFIG_ENV_OFFSET=0x3F8000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4b"
> +CONFIG_DM_RESET=y
>   CONFIG_ROCKCHIP_RK3399=y
>   CONFIG_TARGET_EVB_RK3399=y
>   CONFIG_DEBUG_UART_BASE=0xFF1A0000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0x800800
> +CONFIG_PCI=y
>   CONFIG_DEBUG_UART=y
> +CONFIG_AHCI=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4b.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_SPL_MAX_SIZE=0x2e000
> +CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
>   CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> @@ -22,6 +25,7 @@ CONFIG_TPL=y
>   CONFIG_CMD_BOOTZ=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
>   CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
>   CONFIG_CMD_TIME=y
> @@ -29,19 +33,28 @@ CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
>   CONFIG_ENV_IS_IN_MMC=y
>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SCSI_AHCI=y
> +CONFIG_AHCI_PCI=y
>   CONFIG_ROCKCHIP_GPIO=y
>   CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_ROCKCHIP_IODOMAIN=y
>   CONFIG_MMC_DW=y
>   CONFIG_MMC_DW_ROCKCHIP=y
>   CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_SDMA=y
>   CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH_PHY=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_NVME_PCI=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_TYPEC=y
>   CONFIG_PMIC_RK8XX=y
> -CONFIG_REGULATOR_PWM=y
>   CONFIG_SPL_DM_REGULATOR_FIXED=y
>   CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y
> +CONFIG_SCSI=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_SYS_NS16550_MEM32=y
> @@ -63,5 +76,4 @@ CONFIG_VIDEO=y
>   CONFIG_DISPLAY=y
>   CONFIG_VIDEO_ROCKCHIP=y
>   CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> -CONFIG_SPL_TINY_MEMSET=y
>   CONFIG_ERRNO_STR=y
> diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
> index d9b7a90e8402..95c5766a41f8 100644
> --- a/configs/nanopi-neo4-rk3399_defconfig
> +++ b/configs/nanopi-neo4-rk3399_defconfig
> @@ -6,15 +6,18 @@ CONFIG_SPL_GPIO=y
>   CONFIG_NR_DRAM_BANKS=1
>   CONFIG_ENV_OFFSET=0x3F8000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-neo4"
> +CONFIG_DM_RESET=y
>   CONFIG_ROCKCHIP_RK3399=y
>   CONFIG_TARGET_EVB_RK3399=y
>   CONFIG_DEBUG_UART_BASE=0xFF1A0000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0x800800
> +CONFIG_PCI=y
>   CONFIG_DEBUG_UART=y
> +CONFIG_AHCI=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-neo4.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_SPL_MAX_SIZE=0x2e000
> +CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
>   CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> @@ -22,6 +25,7 @@ CONFIG_TPL=y
>   CONFIG_CMD_BOOTZ=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
>   CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
>   CONFIG_CMD_TIME=y
> @@ -29,19 +33,28 @@ CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
>   CONFIG_ENV_IS_IN_MMC=y
>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SCSI_AHCI=y
> +CONFIG_AHCI_PCI=y
>   CONFIG_ROCKCHIP_GPIO=y
>   CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_ROCKCHIP_IODOMAIN=y
>   CONFIG_MMC_DW=y
>   CONFIG_MMC_DW_ROCKCHIP=y
>   CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_SDMA=y
>   CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH_PHY=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_NVME_PCI=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_TYPEC=y
>   CONFIG_PMIC_RK8XX=y
> -CONFIG_REGULATOR_PWM=y
>   CONFIG_SPL_DM_REGULATOR_FIXED=y
>   CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y
> +CONFIG_SCSI=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_SYS_NS16550_MEM32=y
> @@ -63,5 +76,4 @@ CONFIG_VIDEO=y
>   CONFIG_DISPLAY=y
>   CONFIG_VIDEO_ROCKCHIP=y
>   CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> -CONFIG_SPL_TINY_MEMSET=y
>   CONFIG_ERRNO_STR=y
> diff --git a/configs/nanopi-r4s-rk3399_defconfig b/configs/nanopi-r4s-rk3399_defconfig
> index 1fcccf2bae6e..488d86605f67 100644
> --- a/configs/nanopi-r4s-rk3399_defconfig
> +++ b/configs/nanopi-r4s-rk3399_defconfig
> @@ -6,6 +6,7 @@ CONFIG_SPL_GPIO=y
>   CONFIG_NR_DRAM_BANKS=1
>   CONFIG_ENV_OFFSET=0x3F8000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-r4s"
> +CONFIG_DM_RESET=y
>   CONFIG_ROCKCHIP_RK3399=y
>   CONFIG_TARGET_EVB_RK3399=y
>   CONFIG_DEBUG_UART_BASE=0xFF1A0000
> @@ -14,7 +15,7 @@ CONFIG_SYS_LOAD_ADDR=0x800800
>   CONFIG_DEBUG_UART=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_SPL_MAX_SIZE=0x2e000
> +CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
>   CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> @@ -31,14 +32,16 @@ CONFIG_ENV_IS_IN_MMC=y
>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>   CONFIG_ROCKCHIP_GPIO=y
>   CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_ROCKCHIP_IODOMAIN=y
>   CONFIG_MMC_DW=y
>   CONFIG_MMC_DW_ROCKCHIP=y
> -CONFIG_MMC_SDHCI=y
> -CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH_PHY=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_TYPEC=y
>   CONFIG_PMIC_RK8XX=y
> -CONFIG_REGULATOR_PWM=y
>   CONFIG_SPL_DM_REGULATOR_FIXED=y
>   CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y
> @@ -66,5 +69,4 @@ CONFIG_VIDEO=y
>   CONFIG_DISPLAY=y
>   CONFIG_VIDEO_ROCKCHIP=y
>   CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> -CONFIG_SPL_TINY_MEMSET=y
>   CONFIG_ERRNO_STR=y
diff mbox series

Patch

diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
index 452728b82e42..3bf8f959e42c 100644
--- a/arch/arm/dts/rk3399-nanopc-t4.dts
+++ b/arch/arm/dts/rk3399-nanopc-t4.dts
@@ -39,7 +39,7 @@ 
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm/dts/rk3399-nanopi-m4-2gb.dts b/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
index 60358ab8c7df..e9cf71f224a3 100644
--- a/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
+++ b/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
@@ -10,57 +10,4 @@ 
  */
 
 /dts-v1/;
-#include "rk3399-nanopi4.dtsi"
-
-/ {
-	model = "FriendlyElec NanoPi M4";
-	compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
-
-	vdd_5v: vdd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc5v0_core: vcc5v0-core {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_core";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vdd_5v>;
-	};
-
-	vcc5v0_usb1: vcc5v0-usb1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb1";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_usb2: vcc5v0-usb2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb2";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&vcc3v3_sys {
-	vin-supply = <&vcc5v0_core>;
-};
-
-&u2phy0_host {
-	phy-supply = <&vcc5v0_usb1>;
-};
-
-&u2phy1_host {
-	phy-supply = <&vcc5v0_usb2>;
-};
-
-&vbus_typec {
-	regulator-always-on;
-	vin-supply = <&vdd_5v>;
-};
+#include "rk3399-nanopi-m4.dts"
diff --git a/arch/arm/dts/rk3399-nanopi-m4b.dts b/arch/arm/dts/rk3399-nanopi-m4b.dts
index 72182c58cc46..65cb21837b0c 100644
--- a/arch/arm/dts/rk3399-nanopi-m4b.dts
+++ b/arch/arm/dts/rk3399-nanopi-m4b.dts
@@ -19,7 +19,7 @@ 
 		keyup-threshold-microvolt = <1500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
index cef4d18b599d..fe5b52610010 100644
--- a/arch/arm/dts/rk3399-nanopi-r4s.dts
+++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -46,9 +46,9 @@ 
 	gpio-keys {
 		pinctrl-0 = <&reset_button_pin>;
 
-		/delete-node/ power;
+		/delete-node/ key-power;
 
-		reset {
+		key-reset {
 			debounce-interval = <50>;
 			gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
 			label = "reset";
diff --git a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
index e0d7a518dfc2..757361249968 100644
--- a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
@@ -20,3 +20,7 @@ 
 &vcc3v0_sd {
 	bootph-pre-ram;
 };
+
+&vcc_sdio {
+	regulator-init-microvolt = <3000000>;
+};
diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
index 8c0ff6c96e03..b7f1e47978a6 100644
--- a/arch/arm/dts/rk3399-nanopi4.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4.dtsi
@@ -18,6 +18,7 @@ 
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
@@ -111,7 +112,7 @@ 
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key>;
 
-		power {
+		key-power {
 			debounce-interval = <100>;
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Key Power";
@@ -167,6 +168,7 @@ 
 };
 
 &emmc_phy {
+	rockchip,enable-strobe-pulldown;
 	status = "okay";
 };
 
@@ -267,7 +269,7 @@ 
 		interrupt-parent = <&gpio1>;
 		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
+		pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>;
 		rockchip,system-power-controller;
 		wakeup-source;
 
@@ -374,7 +376,6 @@ 
 			vcc_sdio: LDO_REG4 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-init-microvolt = <3000000>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vcc_sdio";
diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
index 89c36e273a9b..93d163b70f4f 100644
--- a/configs/nanopc-t4-rk3399_defconfig
+++ b/configs/nanopc-t4-rk3399_defconfig
@@ -14,9 +14,10 @@  CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x2e000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
@@ -32,20 +33,28 @@  CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
 CONFIG_NVME_PCI=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_PMIC_RK8XX=y
-CONFIG_REGULATOR_PWM=y
 CONFIG_SPL_DM_REGULATOR_FIXED=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
+CONFIG_SCSI=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550_MEM32=y
@@ -68,5 +77,4 @@  CONFIG_VIDEO=y
 CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_DISPLAY_ROCKCHIP_HDMI=y
-CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
diff --git a/configs/nanopi-m4-2gb-rk3399_defconfig b/configs/nanopi-m4-2gb-rk3399_defconfig
index eb1d2c1f51fc..10bd9fba5388 100644
--- a/configs/nanopi-m4-2gb-rk3399_defconfig
+++ b/configs/nanopi-m4-2gb-rk3399_defconfig
@@ -6,15 +6,18 @@  CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4-2gb"
+CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4-2gb.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x2e000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
@@ -22,6 +25,7 @@  CONFIG_TPL=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
@@ -29,19 +33,28 @@  CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_NVME_PCI=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_PMIC_RK8XX=y
-CONFIG_REGULATOR_PWM=y
 CONFIG_SPL_DM_REGULATOR_FIXED=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
+CONFIG_SCSI=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550_MEM32=y
@@ -63,5 +76,4 @@  CONFIG_VIDEO=y
 CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_DISPLAY_ROCKCHIP_HDMI=y
-CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
index bc0b90b3d861..f5305549716c 100644
--- a/configs/nanopi-m4-rk3399_defconfig
+++ b/configs/nanopi-m4-rk3399_defconfig
@@ -6,15 +6,18 @@  CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4"
+CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x2e000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
@@ -22,6 +25,7 @@  CONFIG_TPL=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
@@ -29,19 +33,28 @@  CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_NVME_PCI=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_PMIC_RK8XX=y
-CONFIG_REGULATOR_PWM=y
 CONFIG_SPL_DM_REGULATOR_FIXED=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
+CONFIG_SCSI=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550_MEM32=y
@@ -63,5 +76,4 @@  CONFIG_VIDEO=y
 CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_DISPLAY_ROCKCHIP_HDMI=y
-CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
diff --git a/configs/nanopi-m4b-rk3399_defconfig b/configs/nanopi-m4b-rk3399_defconfig
index 678f4d9d823f..70de7e0a6d7f 100644
--- a/configs/nanopi-m4b-rk3399_defconfig
+++ b/configs/nanopi-m4b-rk3399_defconfig
@@ -6,15 +6,18 @@  CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4b"
+CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4b.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x2e000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
@@ -22,6 +25,7 @@  CONFIG_TPL=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
@@ -29,19 +33,28 @@  CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_NVME_PCI=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_PMIC_RK8XX=y
-CONFIG_REGULATOR_PWM=y
 CONFIG_SPL_DM_REGULATOR_FIXED=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
+CONFIG_SCSI=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550_MEM32=y
@@ -63,5 +76,4 @@  CONFIG_VIDEO=y
 CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_DISPLAY_ROCKCHIP_HDMI=y
-CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
index d9b7a90e8402..95c5766a41f8 100644
--- a/configs/nanopi-neo4-rk3399_defconfig
+++ b/configs/nanopi-neo4-rk3399_defconfig
@@ -6,15 +6,18 @@  CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-neo4"
+CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-neo4.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x2e000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
@@ -22,6 +25,7 @@  CONFIG_TPL=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
@@ -29,19 +33,28 @@  CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_NVME_PCI=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_PMIC_RK8XX=y
-CONFIG_REGULATOR_PWM=y
 CONFIG_SPL_DM_REGULATOR_FIXED=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
+CONFIG_SCSI=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550_MEM32=y
@@ -63,5 +76,4 @@  CONFIG_VIDEO=y
 CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_DISPLAY_ROCKCHIP_HDMI=y
-CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
diff --git a/configs/nanopi-r4s-rk3399_defconfig b/configs/nanopi-r4s-rk3399_defconfig
index 1fcccf2bae6e..488d86605f67 100644
--- a/configs/nanopi-r4s-rk3399_defconfig
+++ b/configs/nanopi-r4s-rk3399_defconfig
@@ -6,6 +6,7 @@  CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-r4s"
+CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
@@ -14,7 +15,7 @@  CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x2e000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
@@ -31,14 +32,16 @@  CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_PMIC_RK8XX=y
-CONFIG_REGULATOR_PWM=y
 CONFIG_SPL_DM_REGULATOR_FIXED=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
@@ -66,5 +69,4 @@  CONFIG_VIDEO=y
 CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_DISPLAY_ROCKCHIP_HDMI=y
-CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y