diff mbox series

[v3,6/6] imx: imx93-11x11-evk: convert to OF_UPSTREAM

Message ID 20240328-imx93-of-v3-6-4e7f341ed7ea@nxp.com
State Changes Requested
Delegated to: Fabio Estevam
Headers show
Series imx93-11x11-evk: convert to OF_UPSTREAM | expand

Commit Message

Peng Fan (OSS) March 28, 2024, 12:53 a.m. UTC 
From: Peng Fan <peng.fan@nxp.com>

Convert to OF_UPSTREAM for i.MX93 11x11 EVK.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm/dts/Makefile                    |   1 -
 arch/arm/dts/imx93-11x11-evk-u-boot.dtsi | 118 +++++++++++
 arch/arm/dts/imx93-11x11-evk.dts         | 322 -------------------------------
 arch/arm/dts/imx93-u-boot.dtsi           |  15 ++
 arch/arm/mach-imx/imx9/Kconfig           |   1 +
 configs/imx93_11x11_evk_defconfig        |   2 +-
 configs/imx93_11x11_evk_ld_defconfig     |   2 +-
 7 files changed, 136 insertions(+), 325 deletions(-)

Comments

Fabio Estevam March 28, 2024, 12:13 a.m. UTC | #1 
On Wed, Mar 27, 2024 at 8:53 PM Peng Fan (OSS) <peng.fan@oss.nxp.com> wrote:

> +&lpi2c2 {
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       clock-frequency = <400000>;
> +       pinctrl-names = "default", "sleep";
> +       pinctrl-0 = <&pinctrl_lpi2c2>;
> +       pinctrl-1 = <&pinctrl_lpi2c2>;
> +       status = "okay";
> +
> +       pmic@25 {
....
> +       adp5585gpio: gpio@34 {
> +               compatible = "adp5585";
> +               reg = <0x34>;
> +               gpio-controller;
> +               #gpio-cells = <2>;

Please add a comment saying these nodes are already available in 6.9-rc1.

> --- a/arch/arm/mach-imx/imx9/Kconfig
> +++ b/arch/arm/mach-imx/imx9/Kconfig
> @@ -31,6 +31,7 @@ choice
>  config TARGET_IMX93_11X11_EVK
>         bool "imx93_11x11_evk"
>         select IMX93
> +       imply OF_UPSTREAM

Sumit and I asked you to add OF_UPSTREAM to all imx93 boards, not just this one.

Please don't ignore review comments.
Peng Fan March 28, 2024, 12:40 a.m. UTC | #2 
> Subject: Re: [PATCH v3 6/6] imx: imx93-11x11-evk: convert to
> OF_UPSTREAM
> 
> On Wed, Mar 27, 2024 at 8:53 PM Peng Fan (OSS) <peng.fan@oss.nxp.com>
> wrote:
> 
> > +&lpi2c2 {
> > +       #address-cells = <1>;
> > +       #size-cells = <0>;
> > +       clock-frequency = <400000>;
> > +       pinctrl-names = "default", "sleep";
> > +       pinctrl-0 = <&pinctrl_lpi2c2>;
> > +       pinctrl-1 = <&pinctrl_lpi2c2>;
> > +       status = "okay";
> > +
> > +       pmic@25 {
> ....
> > +       adp5585gpio: gpio@34 {
> > +               compatible = "adp5585";
> > +               reg = <0x34>;
> > +               gpio-controller;
> > +               #gpio-cells = <2>;
> 
> Please add a comment saying these nodes are already available in 6.9-rc1.
> 
> > --- a/arch/arm/mach-imx/imx9/Kconfig
> > +++ b/arch/arm/mach-imx/imx9/Kconfig
> > @@ -31,6 +31,7 @@ choice
> >  config TARGET_IMX93_11X11_EVK
> >         bool "imx93_11x11_evk"
> >         select IMX93
> > +       imply OF_UPSTREAM
> 
> Sumit and I asked you to add OF_UPSTREAM to all imx93 boards, not just this
> one.

I could help convert all imx93 boards, but I could only test nxp
imx93 boards, not able to test others.

Thanks,
Peng.
> 
> Please don't ignore review comments.
Fabio Estevam March 28, 2024, 12:44 a.m. UTC | #3 
Hi Peng,

On Wed, Mar 27, 2024 at 9:40 PM Peng Fan <peng.fan@nxp.com> wrote:

> I could help convert all imx93 boards, but I could only test nxp
> imx93 boards, not able to test others.

Just copy the board maintainers in your patch and they could help test
the conversion to OF_UPSTREAM.

Thanks!
Peng Fan March 28, 2024, 1:46 a.m. UTC | #4 
> Subject: Re: [PATCH v3 6/6] imx: imx93-11x11-evk: convert to
> OF_UPSTREAM
> 
> Hi Peng,
> 
> On Wed, Mar 27, 2024 at 9:40 PM Peng Fan <peng.fan@nxp.com> wrote:
> 
> > I could help convert all imx93 boards, but I could only test nxp
> > imx93 boards, not able to test others.
> 
> Just copy the board maintainers in your patch and they could help test the
> conversion to OF_UPSTREAM.

ok, I need use v6.9-rc1-dts for the dts upstream. Some dts not in v6.8-dts.

Thanks,
Peng.

> 
> Thanks!
Peng Fan March 28, 2024, 1:55 a.m. UTC | #5 
> Subject: Re: [PATCH v3 6/6] imx: imx93-11x11-evk: convert to
> OF_UPSTREAM
> 
> On Wed, Mar 27, 2024 at 8:53 PM Peng Fan (OSS) <peng.fan@oss.nxp.com>
> wrote:
> 
> > +&lpi2c2 {
> > +       #address-cells = <1>;
> > +       #size-cells = <0>;
> > +       clock-frequency = <400000>;
> > +       pinctrl-names = "default", "sleep";
> > +       pinctrl-0 = <&pinctrl_lpi2c2>;
> > +       pinctrl-1 = <&pinctrl_lpi2c2>;
> > +       status = "okay";
> > +
> > +       pmic@25 {
> ....
> > +       adp5585gpio: gpio@34 {
> > +               compatible = "adp5585";
> > +               reg = <0x34>;
> > +               gpio-controller;
> > +               #gpio-cells = <2>;
> 
> Please add a comment saying these nodes are already available in 6.9-rc1.

Just gave a check on linux-next/master, the nodes are not there.

Thanks,
Peng
> 
> > --- a/arch/arm/mach-imx/imx9/Kconfig
> > +++ b/arch/arm/mach-imx/imx9/Kconfig
> > @@ -31,6 +31,7 @@ choice
> >  config TARGET_IMX93_11X11_EVK
> >         bool "imx93_11x11_evk"
> >         select IMX93
> > +       imply OF_UPSTREAM
> 
> Sumit and I asked you to add OF_UPSTREAM to all imx93 boards, not just this
> one.
> 
> Please don't ignore review comments.
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d85a33055c9..71c2facfb5e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1115,7 +1115,6 @@  dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mq-librem5-r4.dtb
 
 dtb-$(CONFIG_ARCH_IMX9) += \
-	imx93-11x11-evk.dtb \
 	imx93-var-som-symphony.dtb \
 	imx93-phyboard-segin.dtb
 
diff --git a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
index a99ba99bfb4..408e601bc90 100644
--- a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
@@ -26,6 +26,111 @@ 
 	bootph-pre-ram;
 };
 
+&lpi2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-1 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2237500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	adp5585gpio: gpio@34 {
+		compatible = "adp5585";
+		reg = <0x34>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &aips1 {
 	bootph-pre-ram;
 	bootph-all;
@@ -44,6 +149,19 @@ 
 &iomuxc {
 	bootph-pre-ram;
 	bootph-some-ram;
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
+		>;
+	};
 };
 
 &reg_usdhc2_vmmc {
diff --git a/arch/arm/dts/imx93-11x11-evk.dts b/arch/arm/dts/imx93-11x11-evk.dts
deleted file mode 100644
index 4322cc3e11b..00000000000
--- a/arch/arm/dts/imx93-11x11-evk.dts
+++ /dev/null
@@ -1,322 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 NXP
- */
-
-/dts-v1/;
-
-#include "imx93.dtsi"
-
-/ {
-	model = "NXP i.MX93 11X11 EVK board";
-	compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
-
-	chosen {
-		stdout-path = &lpuart1;
-	};
-
-	reg_vref_1v8: regulator-adc-vref {
-		compatible = "regulator-fixed";
-		regulator-name = "vref_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_usdhc2_vmmc: regulator-usdhc2 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
-		regulator-name = "VSD_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&mu1 {
-	status = "okay";
-};
-
-&mu2 {
-	status = "okay";
-};
-
-&eqos {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_eqos>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <5000000>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			eee-broken-1000t;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy2>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <5000000>;
-
-		ethphy2: ethernet-phy@2 {
-			reg = <2>;
-			eee-broken-1000t;
-		};
-	};
-};
-
-&lpi2c2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clock-frequency = <400000>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_lpi2c2>;
-	pinctrl-1 = <&pinctrl_lpi2c2>;
-	status = "okay";
-
-	pmic@25 {
-		compatible = "nxp,pca9451a";
-		reg = <0x25>;
-		interrupt-parent = <&pcal6524>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
-		regulators {
-			buck1: BUCK1 {
-				regulator-name = "BUCK1";
-				regulator-min-microvolt = <650000>;
-				regulator-max-microvolt = <2237500>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <3125>;
-			};
-
-			buck2: BUCK2 {
-				regulator-name = "BUCK2";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <2187500>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <3125>;
-			};
-
-			buck4: BUCK4{
-				regulator-name = "BUCK4";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck5: BUCK5{
-				regulator-name = "BUCK5";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck6: BUCK6 {
-				regulator-name = "BUCK6";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo1: LDO1 {
-				regulator-name = "LDO1";
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo4: LDO4 {
-				regulator-name = "LDO4";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo5: LDO5 {
-				regulator-name = "LDO5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	pcal6524: gpio@22 {
-		compatible = "nxp,pcal6524";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcal6524>;
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	adp5585gpio: gpio@34 {
-		compatible = "adp5585";
-		reg = <0x34>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&lpuart1 { /* console */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1>;
-	pinctrl-2 = <&pinctrl_usdhc1>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_usdhc2_vmmc>;
-	bus-width = <4>;
-	status = "okay";
-	no-sdio;
-	no-mmc;
-};
-
-&iomuxc {
-	pinctrl_lpi2c2: lpi2c2grp {
-		fsl,pins = <
-			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e
-			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e
-		>;
-	};
-
-	pinctrl_pcal6524: pcal6524grp {
-		fsl,pins = <
-			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
-		>;
-	};
-
-	pinctrl_eqos: eqosgrp {
-		fsl,pins = <
-			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
-			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
-			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
-			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
-			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
-			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
-			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
-			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
-			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
-			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
-			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
-			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
-			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
-			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e
-			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x57e
-			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
-			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
-			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
-			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
-			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
-			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
-			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
-			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
-			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
-			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
-			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
-			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
-			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
-			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
-			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
-			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
-			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
-			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
-			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
-			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
-			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
-			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
-			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
-		>;
-	};
-
-	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
-		fsl,pins = <
-			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
-		>;
-	};
-
-	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
-		fsl,pins = <
-			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
-			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
-			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
-		>;
-	};
-};
diff --git a/arch/arm/dts/imx93-u-boot.dtsi b/arch/arm/dts/imx93-u-boot.dtsi
index 40e17bbc5ae..289aba17584 100644
--- a/arch/arm/dts/imx93-u-boot.dtsi
+++ b/arch/arm/dts/imx93-u-boot.dtsi
@@ -86,3 +86,18 @@ 
 		};
 	};
 };
+
+&tmu {
+	compatible = "fsl,imx93-tmu";
+	reg = <0x44482000 0x1000>;
+	clocks = <&clk IMX93_CLK_TMC_GATE>;
+	little-endian;
+	fsl,tmu-calibration = <0x0000000e 0x800000da
+			       0x00000029 0x800000e9
+			       0x00000056 0x80000102
+			       0x000000a2 0x8000012a
+			       0x00000116 0x80000166
+			       0x00000195 0x800001a7
+			       0x000001b2 0x800001b6>;
+	#thermal-sensor-cells = <1>;
+};
diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig
index b79485f1f75..e892da80fe8 100644
--- a/arch/arm/mach-imx/imx9/Kconfig
+++ b/arch/arm/mach-imx/imx9/Kconfig
@@ -31,6 +31,7 @@  choice
 config TARGET_IMX93_11X11_EVK
 	bool "imx93_11x11_evk"
 	select IMX93
+	imply OF_UPSTREAM
 
 config TARGET_IMX93_VAR_SOM
 	bool "imx93_var_som"
diff --git a/configs/imx93_11x11_evk_defconfig b/configs/imx93_11x11_evk_defconfig
index 63613477c7f..a671de7ca40 100644
--- a/configs/imx93_11x11_evk_defconfig
+++ b/configs/imx93_11x11_evk_defconfig
@@ -10,7 +10,7 @@  CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x700000
 CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
 CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx93-11x11-evk"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx93-11x11-evk"
 CONFIG_SPL_TEXT_BASE=0x2049A000
 CONFIG_TARGET_IMX93_11X11_EVK=y
 CONFIG_SYS_MONITOR_LEN=524288
diff --git a/configs/imx93_11x11_evk_ld_defconfig b/configs/imx93_11x11_evk_ld_defconfig
index 4e3bbdd0cf5..4e1f162e35a 100644
--- a/configs/imx93_11x11_evk_ld_defconfig
+++ b/configs/imx93_11x11_evk_ld_defconfig
@@ -10,7 +10,7 @@  CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x400000
 CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
 CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx93-11x11-evk"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx93-11x11-evk"
 CONFIG_SPL_TEXT_BASE=0x2049A000
 CONFIG_IMX9_LOW_DRIVE_MODE=y
 CONFIG_TARGET_IMX93_11X11_EVK=y