@@ -3,9 +3,9 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_DEFAULT_DEVICE_TREE="rk3308-evb"
+CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
CONFIG_ROCKCHIP_RK3308=y
-CONFIG_SPL_DRIVERS_MISC=y
CONFIG_TARGET_EVB_RK3308=y
CONFIG_DEBUG_UART_BASE=0xFF0C0000
CONFIG_DEBUG_UART_CLOCK=24000000
@@ -14,30 +14,20 @@ CONFIG_DEBUG_UART=y
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
-CONFIG_BOOTDELAY=0
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3308-evb.dtb"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_PAD_TO=0x7f8000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_CMD_BDI is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_SLEEP is not set
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_ISO_PARTITION is not set
-CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
+CONFIG_CMD_RNG=y
+CONFIG_CMD_KASLRSEED=y
+CONFIG_CMD_REGULATOR=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
@@ -51,9 +41,11 @@ CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PHY=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PINCTRL=y
CONFIG_REGULATOR_PWM=y
CONFIG_DM_REGULATOR_FIXED=y
@@ -62,15 +54,15 @@ CONFIG_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSINFO=y
CONFIG_SYSRESET=y
CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_DWC2=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_SPL_TINY_MEMSET=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
CONFIG_LZO=y
CONFIG_ERRNO_STR=y
-# CONFIG_EFI_LOADER is not set
Update defconfig for rk3308-evb with new defaults. Add OF_LIBFDT_OVERLAY=y to support device tree overlays. Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL. Remove BOOTDELAY=0, SYS_CONSOLE_INFO_QUIET=y and enable more CMD to allow use of U-Boot cmdline. Add DM_ETH_PHY=y and PHY_REALTEK=y to support onboard ethernet PHY. Add PHY_ROCKCHIP_INNO_USB2=y, DM_USB_GADGET=y and remove USB_DWC2=y to allow full use of USB 2.0 host and otg ports. Enable EFI_LOADER to allow EFI boot. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- configs/evb-rk3308_defconfig | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-)