diff mbox series

[v2,1/2] rockchip: rk3328: Update stack addresses

Message ID 20240217005817.2150377-2-jonas@kwiboo.se
State Deferred
Delegated to: Kever Yang
Headers show
Series rockchip: Update stack and bss addresses on RK3328 and RK3399 | expand

Commit Message

Jonas Karlman Feb. 17, 2024, 12:58 a.m. UTC 
With the stack and text base used by U-Boot SPL and proper on RK3328
there is a high likelihood of overlapping when U-Boot proper + FDT nears
1 MiB in size.

Currently the following memory layout is used:
- 0x00000000 (@0 MiB): U-Boot SPL text base
- 0x00040000 (@256 KiB): TF-A
- 0x00200000 (@2 MiB): U-Boot proper text base
- 0x00300000 (@3 MiB): U-Boot proper init stack
- 0x00400000 (@4 MiB): U-Boot SPL init stack
- 0x00600000 (@6 MiB): U-Boot SPL reloc stack
- 0x02000000 (@32 MiB): U-Boot SPL bss
- 0x08400000 (@132 MiB): optional OPTEE

SPL load TF-A, U-Boot proper and optional OPTEE after SPL stack has
relocated, meaning that there is room for close to 4 MiB (@2-6 MiB).
However, the initial stack used by U-Boot proper is limiting the size
of U-Boot proper + FDT to below 1 MiB (@2-3 MiB).

Instead change to use the following memory layout:
- 0x00000000 (@0 MiB): U-Boot SPL text base
- 0x00040000 (@256 KiB): TF-A
- 0x00200000 (@2 MiB): U-Boot proper text base
- 0x00400000 (@4 MiB): U-Boot SPL init stack
- 0x00800000 (@8 MiB): U-Boot proper init stack (changed)
- 0x02000000 (@32 MiB): U-Boot SPL bss
- 0x04000000 (@64 MiB): U-Boot SPL reloc stack (changed)
- 0x08400000 (@132 MiB): optional OPTEE

This should leave room for loading and running a U-Boot proper close
to 6 MiB (@2-8 MiB) in size. When U-Boot proper has relocated is should
be possible to use @2-132 MiB and @164 MiB+ for scripts, kernel etc.

Also update SYS_MALLOC_F_LEN to use a 16 KiB malloc area running in SPL
pre-reloc and proper pre-reloc stage. Same size that is used on RK3399.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v2:
- Rebase on v2 of "rockchip: rk3328: Update defconfigs, DTs and enable
  boot from SPI" [1]

[1] https://patchwork.ozlabs.org/cover/1900345/
---
 arch/arm/mach-rockchip/rk3328/Kconfig         | 2 +-
 configs/evb-rk3328_defconfig                  | 4 +---
 configs/nanopi-r2c-plus-rk3328_defconfig      | 4 ++--
 configs/nanopi-r2c-rk3328_defconfig           | 4 ++--
 configs/nanopi-r2s-rk3328_defconfig           | 4 ++--
 configs/orangepi-r1-plus-lts-rk3328_defconfig | 4 ++--
 configs/orangepi-r1-plus-rk3328_defconfig     | 4 ++--
 configs/roc-cc-rk3328_defconfig               | 4 ++--
 configs/rock-pi-e-rk3328_defconfig            | 4 +---
 configs/rock64-rk3328_defconfig               | 4 ++--
 10 files changed, 17 insertions(+), 21 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-rockchip/rk3328/Kconfig b/arch/arm/mach-rockchip/rk3328/Kconfig
index d5cb649ae6ba..681a1a624da2 100644
--- a/arch/arm/mach-rockchip/rk3328/Kconfig
+++ b/arch/arm/mach-rockchip/rk3328/Kconfig
@@ -22,7 +22,7 @@  config SYS_SOC
 	default "rk3328"
 
 config SYS_MALLOC_F_LEN
-	default 0x2000
+	default 0x4000
 
 config SPL_LIBCOMMON_SUPPORT
 	default y
diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig
index da422c8ba4e7..f456f6d88f9b 100644
--- a/configs/evb-rk3328_defconfig
+++ b/configs/evb-rk3328_defconfig
@@ -5,7 +5,7 @@  CONFIG_ARCH_ROCKCHIP=y
 CONFIG_TEXT_BASE=0x00200000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-evb"
@@ -17,7 +17,6 @@  CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x4000000
 CONFIG_SPL_STACK=0x400000
 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
-CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
@@ -39,7 +38,6 @@  CONFIG_SPL_BSS_MAX_SIZE=0x2000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
 CONFIG_TPL_SYS_MALLOC_SIMPLE=y
diff --git a/configs/nanopi-r2c-plus-rk3328_defconfig b/configs/nanopi-r2c-plus-rk3328_defconfig
index 25850328f8b8..ccac94ab0961 100644
--- a/configs/nanopi-r2c-plus-rk3328_defconfig
+++ b/configs/nanopi-r2c-plus-rk3328_defconfig
@@ -6,7 +6,7 @@  CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2c-plus"
@@ -15,7 +15,7 @@  CONFIG_ROCKCHIP_RK3328=y
 CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
 CONFIG_SPL_STACK=0x400000
 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
diff --git a/configs/nanopi-r2c-rk3328_defconfig b/configs/nanopi-r2c-rk3328_defconfig
index a4cb148246e6..0097cf98ed79 100644
--- a/configs/nanopi-r2c-rk3328_defconfig
+++ b/configs/nanopi-r2c-rk3328_defconfig
@@ -6,7 +6,7 @@  CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2c"
@@ -15,7 +15,7 @@  CONFIG_ROCKCHIP_RK3328=y
 CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
 CONFIG_SPL_STACK=0x400000
 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
diff --git a/configs/nanopi-r2s-rk3328_defconfig b/configs/nanopi-r2s-rk3328_defconfig
index c5d13788528b..4b43818b7dc7 100644
--- a/configs/nanopi-r2s-rk3328_defconfig
+++ b/configs/nanopi-r2s-rk3328_defconfig
@@ -6,7 +6,7 @@  CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2s"
@@ -15,7 +15,7 @@  CONFIG_ROCKCHIP_RK3328=y
 CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
 CONFIG_SPL_STACK=0x400000
 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
diff --git a/configs/orangepi-r1-plus-lts-rk3328_defconfig b/configs/orangepi-r1-plus-lts-rk3328_defconfig
index 6360f5df3864..18e253c44154 100644
--- a/configs/orangepi-r1-plus-lts-rk3328_defconfig
+++ b/configs/orangepi-r1-plus-lts-rk3328_defconfig
@@ -6,7 +6,7 @@  CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-orangepi-r1-plus-lts"
@@ -16,7 +16,7 @@  CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
 CONFIG_SPL_STACK=0x400000
 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
diff --git a/configs/orangepi-r1-plus-rk3328_defconfig b/configs/orangepi-r1-plus-rk3328_defconfig
index 9473a08fe20d..8a403b5c664d 100644
--- a/configs/orangepi-r1-plus-rk3328_defconfig
+++ b/configs/orangepi-r1-plus-rk3328_defconfig
@@ -6,7 +6,7 @@  CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-orangepi-r1-plus"
@@ -16,7 +16,7 @@  CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
 CONFIG_SPL_STACK=0x400000
 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
diff --git a/configs/roc-cc-rk3328_defconfig b/configs/roc-cc-rk3328_defconfig
index c66b1ccba267..b6e0bd2fb47a 100644
--- a/configs/roc-cc-rk3328_defconfig
+++ b/configs/roc-cc-rk3328_defconfig
@@ -6,7 +6,7 @@  CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-roc-cc"
@@ -15,7 +15,7 @@  CONFIG_ROCKCHIP_RK3328=y
 CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
 CONFIG_SPL_STACK=0x400000
 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
diff --git a/configs/rock-pi-e-rk3328_defconfig b/configs/rock-pi-e-rk3328_defconfig
index 275ffc3ed8f4..e5e96cd59b77 100644
--- a/configs/rock-pi-e-rk3328_defconfig
+++ b/configs/rock-pi-e-rk3328_defconfig
@@ -6,7 +6,7 @@  CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock-pi-e"
@@ -18,7 +18,6 @@  CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x4000000
 CONFIG_SPL_STACK=0x400000
 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
-CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
@@ -40,7 +39,6 @@  CONFIG_SPL_BSS_MAX_SIZE=0x2000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_SPL_POWER=y
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
index 1cb4e6777d45..408ebe0aa264 100644
--- a/configs/rock64-rk3328_defconfig
+++ b/configs/rock64-rk3328_defconfig
@@ -6,7 +6,7 @@  CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
@@ -16,7 +16,7 @@  CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
 CONFIG_SPL_STACK=0x400000
 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000