| Message ID | 20240217002304.2141064-15-jonas@kwiboo.se |
|---|---|
| State | Accepted |
| Commit | a37a3ddd515b751e495a488cbbdd4afaf32e7d30 |
| Delegated to: | Kever Yang |
| Headers | show |
| Series | rockchip: rk3328: Update defconfigs, DTs and enable boot from SPI | expand |
On 2024/2/17 08:22, Jonas Karlman wrote: > Add Kconfig options to enable support for booting from SPI NOR flash on > Pine64 Rock64. > > The generated bootable u-boot-rockchip-spi.bin can be written to 0x0 of > SPI NOR flash. The FIT image is loaded from 0x60000, same as on RK35xx > boards. > > => sf probe > SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB > > => load mmc 1:1 10000000 u-boot-rockchip-spi.bin > 1359872 bytes read in 65 ms (20 MiB/s) > > => sf update ${fileaddr} 0 ${filesize} > device 0 offset 0x0, size 0x14c000 > 1118208 bytes written, 241664 bytes skipped in 8.516s, speed 163516 B/s > > Signed-off-by: Jonas Karlman <jonas@kwiboo.se> > Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > v2: > - Include SPI flash pinctrl nodes in SPL > - Enable SPI_FLASH_XTX > - Collect r-b tag > --- > arch/arm/dts/rk3328-rock64-u-boot.dtsi | 16 ++++++++++++++++ > configs/rock64-rk3328_defconfig | 9 +++++++++ > 2 files changed, 25 insertions(+) > > diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi > index 9de645d8d7ab..85426495c3d8 100644 > --- a/arch/arm/dts/rk3328-rock64-u-boot.dtsi > +++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi > @@ -39,6 +39,22 @@ > }; > }; > > +&spi0m2_clk { > + bootph-pre-ram; > +}; > + > +&spi0m2_cs0 { > + bootph-pre-ram; > +}; > + > +&spi0m2_rx { > + bootph-pre-ram; > +}; > + > +&spi0m2_tx { > + bootph-pre-ram; > +}; > + > &vcc_sd { > bootph-pre-ram; > }; > diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig > index feda87014286..0c640d7eaadc 100644 > --- a/configs/rock64-rk3328_defconfig > +++ b/configs/rock64-rk3328_defconfig > @@ -13,6 +13,7 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64" > CONFIG_DM_RESET=y > CONFIG_ROCKCHIP_RK3328=y > CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y > +CONFIG_ROCKCHIP_SPI_IMAGE=y > CONFIG_TPL_LIBCOMMON_SUPPORT=y > CONFIG_TPL_LIBGENERIC_SUPPORT=y > CONFIG_SPL_STACK_R_ADDR=0x600000 > @@ -20,6 +21,8 @@ CONFIG_SPL_STACK=0x400000 > CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 > CONFIG_DEBUG_UART_BASE=0xFF130000 > CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_SPL_SPI_FLASH_SUPPORT=y > +CONFIG_SPL_SPI=y > CONFIG_SYS_LOAD_ADDR=0x800800 > CONFIG_DEBUG_UART=y > # CONFIG_ANDROID_BOOT_IMAGE is not set > @@ -41,6 +44,8 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 > # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set > CONFIG_SPL_STACK_R=y > CONFIG_SPL_POWER=y > +CONFIG_SPL_SPI_LOAD=y > +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 > CONFIG_SPL_ATF=y > CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y > CONFIG_TPL_SYS_MALLOC_SIMPLE=y > @@ -78,7 +83,11 @@ CONFIG_MISC=y > CONFIG_ROCKCHIP_EFUSE=y > CONFIG_MMC_DW=y > CONFIG_MMC_DW_ROCKCHIP=y > +CONFIG_SPI_FLASH_SFDP_SUPPORT=y > CONFIG_SPI_FLASH_GIGADEVICE=y > +CONFIG_SPI_FLASH_MACRONIX=y > +CONFIG_SPI_FLASH_WINBOND=y > +CONFIG_SPI_FLASH_XTX=y > CONFIG_PHY_REALTEK=y > CONFIG_DM_ETH_PHY=y > CONFIG_PHY_GIGE=y
diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi index 9de645d8d7ab..85426495c3d8 100644 --- a/arch/arm/dts/rk3328-rock64-u-boot.dtsi +++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi @@ -39,6 +39,22 @@ }; }; +&spi0m2_clk { + bootph-pre-ram; +}; + +&spi0m2_cs0 { + bootph-pre-ram; +}; + +&spi0m2_rx { + bootph-pre-ram; +}; + +&spi0m2_tx { + bootph-pre-ram; +}; + &vcc_sd { bootph-pre-ram; }; diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig index feda87014286..0c640d7eaadc 100644 --- a/configs/rock64-rk3328_defconfig +++ b/configs/rock64-rk3328_defconfig @@ -13,6 +13,7 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3328=y CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y +CONFIG_ROCKCHIP_SPI_IMAGE=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x600000 @@ -20,6 +21,8 @@ CONFIG_SPL_STACK=0x400000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 CONFIG_DEBUG_UART_BASE=0xFF130000 CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y # CONFIG_ANDROID_BOOT_IMAGE is not set @@ -41,6 +44,8 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y CONFIG_SPL_POWER=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y CONFIG_TPL_SYS_MALLOC_SIMPLE=y @@ -78,7 +83,11 @@ CONFIG_MISC=y CONFIG_ROCKCHIP_EFUSE=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_XTX=y CONFIG_PHY_REALTEK=y CONFIG_DM_ETH_PHY=y CONFIG_PHY_GIGE=y
Add Kconfig options to enable support for booting from SPI NOR flash on Pine64 Rock64. The generated bootable u-boot-rockchip-spi.bin can be written to 0x0 of SPI NOR flash. The FIT image is loaded from 0x60000, same as on RK35xx boards. => sf probe SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB => load mmc 1:1 10000000 u-boot-rockchip-spi.bin 1359872 bytes read in 65 ms (20 MiB/s) => sf update ${fileaddr} 0 ${filesize} device 0 offset 0x0, size 0x14c000 1118208 bytes written, 241664 bytes skipped in 8.516s, speed 163516 B/s Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Dragan Simic <dsimic@manjaro.org> --- v2: - Include SPI flash pinctrl nodes in SPL - Enable SPI_FLASH_XTX - Collect r-b tag --- arch/arm/dts/rk3328-rock64-u-boot.dtsi | 16 ++++++++++++++++ configs/rock64-rk3328_defconfig | 9 +++++++++ 2 files changed, 25 insertions(+)