Message ID | 20231103224733.59410-1-festevam@gmail.com |
---|---|
State | Accepted |
Commit | 99da64e1efce5eaa59c78cc6e7586d014b5917ef |
Delegated to: | Stefano Babic |
Headers | show |
Series | pico-imx7d: Remove board_phy_config() | expand |
On Fri, Nov 3, 2023 at 7:47 PM Fabio Estevam <festevam@gmail.com> wrote: > > From: Fabio Estevam <festevam@denx.de> > > With Ethernet DM in place, there is no longer the need for having > the board_phy_config() anymore. > > Remove it. > > Tested on imx7d-pico-pi board: > > => setenv autoload no > => dhcp > BOOTP broadcast 1 > *** Unhandled DHCP Option in OFFER/ACK: 42 > DHCP client bound to address 192.168.0.138 (138 ms) > => tftp zImage > Using ethernet@30be0000 device > TFTP from server 192.168.0.16; our IP address is 192.168.0.138 > Filename 'zImage'. > Load address: 0x80800000 > Loading: ################################################################# > .... > ################################################################# > ########## > 4.3 MiB/s > done > Bytes transferred = 9034120 (89d988 hex) > > Signed-off-by: Fabio Estevam <festevam@denx.de> Applied to u-boot-imx next, thanks.
diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c index 6e98b85b2873..5def6eda43e5 100644 --- a/board/technexion/pico-imx7d/pico-imx7d.c +++ b/board/technexion/pico-imx7d/pico-imx7d.c @@ -101,32 +101,6 @@ static int setup_fec(void) return set_clk_enet(ENET_125MHZ); } - -int board_phy_config(struct phy_device *phydev) -{ - unsigned short val; - - /* To enable AR8035 ouput a 125MHz clk from CLK_25M */ - phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7); - phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016); - phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007); - - val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe); - val &= 0xffe7; - val |= 0x18; - phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val); - - /* introduce tx clock delay */ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); - val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); - val |= 0x0100; - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val); - - if (phydev->drv->config) - phydev->drv->config(phydev); - - return 0; -} #endif static void setup_iomux_uart(void)