diff mbox series

[35/42] imx9: imx93_evk: Update spl stack & bss base address

Message ID 20230428040847.10841-36-peng.fan@oss.nxp.com
State Accepted
Commit 54e9cee225188a0104b3da5a0d40fe509c64cdad
Delegated to: Stefano Babic
Headers show
Series imx: i.MX9 update | expand

Commit Message

Peng Fan (OSS) April 28, 2023, 4:08 a.m. UTC 
From: Peng Fan <peng.fan@nxp.com>

As the ddr timing info will be saved at the last 16KB of
the OCRAM, spl stack & bss base should be updated to avoid
conflict.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 configs/imx93_11x11_evk_defconfig    | 4 ++--
 configs/imx93_11x11_evk_ld_defconfig | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

Comments

Stefano Babic May 21, 2023, 4:58 p.m. UTC | #1 
> From: Peng Fan <peng.fan@nxp.com>
> As the ddr timing info will be saved at the last 16KB of
> the OCRAM, spl stack & bss base should be updated to avoid
> conflict.
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/configs/imx93_11x11_evk_defconfig b/configs/imx93_11x11_evk_defconfig
index c2709f8c66c..cf240baae5b 100644
--- a/configs/imx93_11x11_evk_defconfig
+++ b/configs/imx93_11x11_evk_defconfig
@@ -15,7 +15,7 @@  CONFIG_TARGET_IMX93_11X11_EVK=y
 CONFIG_SYS_PROMPT="u-boot=> "
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_STACK=0x2051ddd0
+CONFIG_SPL_STACK=0x20519dd0
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
 CONFIG_SPL_LOAD_IMX_CONTAINER=y
@@ -30,7 +30,7 @@  CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_MAX_SIZE=0x26000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2051e000
+CONFIG_SPL_BSS_START_ADDR=0x2051a000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
diff --git a/configs/imx93_11x11_evk_ld_defconfig b/configs/imx93_11x11_evk_ld_defconfig
index caf17de3b10..ac8a23fcbf7 100644
--- a/configs/imx93_11x11_evk_ld_defconfig
+++ b/configs/imx93_11x11_evk_ld_defconfig
@@ -31,12 +31,12 @@  CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_MAX_SIZE=0x26000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2051e000
+CONFIG_SPL_BSS_START_ADDR=0x2051a000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x2051ddd0
+CONFIG_SPL_STACK=0x20519dd0
 CONFIG_SYS_SPL_MALLOC=y
 CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
 CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x83200000