@@ -1,12 +1,12 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for ODROID-C2
-====================
+U-Boot for ODROID-C2 (S905)
+===========================
-ODROID-C2 is a single board computer manufactured by Hardkernel
-Co. Ltd with the following specifications:
+ODROID-C2 is a single board computer manufactured by Hardkernel with the following
+specifications:
- - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz
+ - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz
- ARM Mali 450 GPU
- 2GB DDR3 SDRAM
- Gigabit Ethernet
@@ -16,9 +16,9 @@ Co. Ltd with the following specifications:
- eMMC, microSD
- Infrared receiver
-Schematics are available on the manufacturer website.
+Schematics are available on the manufacturer website: https://wiki.odroid.com
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -27,38 +27,44 @@ U-Boot compilation
$ make odroid-c2_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `odroid-c2`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh odroid-c2 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
$ DIR=odroid-c2
- $ git clone --depth 1 \
- https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \
- $DIR
+ $ git clone --depth 1 https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 $DIR
+
$ $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \
- --bl301 $DIR/fip/gxb/bl301.bin \
- --bl31 $DIR/fip/gxb/bl31.bin \
- --bl33 u-boot.bin \
- $DIR/fip.bin
+ --bl301 $DIR/fip/gxb/bl301.bin \
+ --bl31 $DIR/fip/gxb/bl31.bin \
+ --bl33 u-boot.bin \
+ $DIR/fip.bin
+
$ $DIR/fip/fip_create --dump $DIR/fip.bin
$ cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin
$ $DIR/fip/gxb/aml_encrypt_gxb --bootsig \
- --input $DIR/boot_new.bin \
- --output $DIR/u-boot.img
+ --input $DIR/boot_new.bin \
+ --output $DIR/u-boot.img
$ dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96
-and then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/your_boot_device
$ BL1=$DIR/sd_fuse/bl1.bin.hardkernel
$ dd if=$BL1 of=$DEV conv=fsync bs=1 count=442
$ dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1
Improve documentation. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> --- doc/board/amlogic/odroid-c2.rst | 54 ++++++++++++++++++--------------- 1 file changed, 30 insertions(+), 24 deletions(-)