@@ -56,7 +56,6 @@ obj-$(CONFIG_NAND_DENALI) += denali.o
obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o
obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
-obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o
obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
deleted file mode 100644
@@ -1,187 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * FSL UPM NAND driver
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- * Anton Vorontsov <avorontsov@ru.mvista.com>
- */
-
-#include <config.h>
-#include <common.h>
-#include <log.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/fsl_upm.h>
-#include <nand.h>
-
-static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
-{
- clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset);
- (void)in_be32(upm->mxmr);
-}
-
-static void fsl_upm_end_pattern(struct fsl_upm *upm)
-{
- clrbits_be32(upm->mxmr, MxMR_OP_RUNP);
-
- while (in_be32(upm->mxmr) & MxMR_OP_RUNP)
- eieio();
-}
-
-static void fsl_upm_run_pattern(struct fsl_upm *upm, int width,
- void __iomem *io_addr, u32 mar)
-{
- out_be32(upm->mar, mar);
- (void)in_be32(upm->mar);
- switch (width) {
- case 8:
- out_8(io_addr, 0x0);
- break;
- case 16:
- out_be16(io_addr, 0x0);
- break;
- case 32:
- out_be32(io_addr, 0x0);
- break;
- }
-}
-
-static void fun_wait(struct fsl_upm_nand *fun)
-{
- if (fun->dev_ready) {
- while (!fun->dev_ready(fun->chip_nr))
- debug("unexpected busy state\n");
- } else {
- /*
- * If the R/B pin is not connected,
- * a short delay is necessary.
- */
- udelay(1);
- }
-}
-
-#if CONFIG_SYS_NAND_MAX_CHIPS > 1
-static void fun_select_chip(struct mtd_info *mtd, int chip_nr)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct fsl_upm_nand *fun = nand_get_controller_data(chip);
-
- if (chip_nr >= 0) {
- fun->chip_nr = chip_nr;
- chip->IO_ADDR_R = chip->IO_ADDR_W =
- fun->upm.io_addr + fun->chip_offset * chip_nr;
- } else if (chip_nr == -1) {
- chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
- }
-}
-#endif
-
-static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct fsl_upm_nand *fun = nand_get_controller_data(chip);
- void __iomem *io_addr;
- u32 mar;
-
- if (!(ctrl & fun->last_ctrl)) {
- fsl_upm_end_pattern(&fun->upm);
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- fun->last_ctrl = ctrl & (NAND_ALE | NAND_CLE);
- }
-
- if (ctrl & NAND_CTRL_CHANGE) {
- if (ctrl & NAND_ALE)
- fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
- else if (ctrl & NAND_CLE)
- fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
- }
-
- mar = cmd << (32 - fun->width);
- io_addr = fun->upm.io_addr;
-#if CONFIG_SYS_NAND_MAX_CHIPS > 1
- if (fun->chip_nr > 0) {
- io_addr += fun->chip_offset * fun->chip_nr;
- if (fun->upm_mar_chip_offset)
- mar |= fun->upm_mar_chip_offset * fun->chip_nr;
- }
-#endif
- fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
-
- /*
- * Some boards/chips needs this. At least the MPC8360E-RDK
- * needs it. Probably weird chip, because I don't see any
- * need for this on MPC8555E + Samsung K9F1G08U0A. Usually
- * here are 0-2 unexpected busy states per block read.
- */
- if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
- fun_wait(fun);
-}
-
-static u8 upm_nand_read_byte(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- return in_8(chip->IO_ADDR_R);
-}
-
-static void upm_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
- int i;
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct fsl_upm_nand *fun = nand_get_controller_data(chip);
-
- for (i = 0; i < len; i++) {
- out_8(chip->IO_ADDR_W, buf[i]);
- if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BYTE)
- fun_wait(fun);
- }
-
- if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BUFFER)
- fun_wait(fun);
-}
-
-static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-{
- int i;
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- for (i = 0; i < len; i++)
- buf[i] = in_8(chip->IO_ADDR_R);
-}
-
-static int nand_dev_ready(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct fsl_upm_nand *fun = nand_get_controller_data(chip);
-
- return fun->dev_ready(fun->chip_nr);
-}
-
-int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
-{
- if (fun->width != 8 && fun->width != 16 && fun->width != 32)
- return -ENOSYS;
-
- fun->last_ctrl = NAND_CLE;
-
- nand_set_controller_data(chip, fun);
- chip->chip_delay = fun->chip_delay;
- chip->ecc.mode = NAND_ECC_SOFT;
- chip->cmd_ctrl = fun_cmd_ctrl;
-#if CONFIG_SYS_NAND_MAX_CHIPS > 1
- chip->select_chip = fun_select_chip;
-#endif
- chip->read_byte = upm_nand_read_byte;
- chip->read_buf = upm_nand_read_buf;
- chip->write_buf = upm_nand_write_buf;
- if (fun->dev_ready)
- chip->dev_ready = nand_dev_ready;
-
- return 0;
-}
deleted file mode 100644
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * FSL UPM NAND driver
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- * Anton Vorontsov <avorontsov@ru.mvista.com>
- */
-
-#ifndef __LINUX_MTD_NAND_FSL_UPM
-#define __LINUX_MTD_NAND_FSL_UPM
-
-#include <linux/mtd/rawnand.h>
-
-#define FSL_UPM_WAIT_RUN_PATTERN 0x1
-#define FSL_UPM_WAIT_WRITE_BYTE 0x2
-#define FSL_UPM_WAIT_WRITE_BUFFER 0x4
-
-struct fsl_upm {
- void __iomem *mdr;
- void __iomem *mxmr;
- void __iomem *mar;
- void __iomem *io_addr;
-};
-
-struct fsl_upm_nand {
- struct fsl_upm upm;
-
- int width;
- int upm_cmd_offset;
- int upm_addr_offset;
- int upm_mar_chip_offset;
- int wait_flags;
- int (*dev_ready)(int chip_nr);
- int chip_delay;
- int chip_offset;
- int chip_nr;
-
- /* no need to fill */
- int last_ctrl;
-};
-
-extern int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun);
-
-#endif