@@ -618,14 +618,6 @@ The following options need to be configured:
variable usbtty to be cdc_acm should suffice. The following
might be defined in YourBoardName.h
- CONFIG_USBD_HS
- Define this to enable the high speed support for usb
- device and usbtty. If this feature is enabled, a routine
- int is_usbd_high_speed(void)
- also needs to be defined by the driver to dynamically poll
- whether the enumeration has succeded at high speed or full
- speed.
-
If you have a USB-IF assigned VendorID then you may wish to
define your own vendor specific values either in BoardName.h
or directly in usbd_vendor_info.h. If you don't define
@@ -120,20 +120,6 @@ static struct usb_device_descriptor device_descriptor = {
.bNumConfigurations = NUM_CONFIGS
};
-
-#if defined(CONFIG_USBD_HS)
-static struct usb_qualifier_descriptor qualifier_descriptor = {
- .bLength = sizeof(struct usb_qualifier_descriptor),
- .bDescriptorType = USB_DT_QUAL,
- .bcdUSB = cpu_to_le16(USB_BCD_VERSION),
- .bDeviceClass = COMMUNICATIONS_DEVICE_CLASS,
- .bDeviceSubClass = 0x00,
- .bDeviceProtocol = 0x00,
- .bMaxPacketSize0 = EP0_MAX_PACKET_SIZE,
- .bNumConfigurations = NUM_CONFIGS
-};
-#endif
-
/*
* Static CDC ACM specific descriptors
*/
@@ -639,9 +625,6 @@ static void usbtty_init_instances (void)
memset (device_instance, 0, sizeof (struct usb_device_instance));
device_instance->device_state = STATE_INIT;
device_instance->device_descriptor = &device_descriptor;
-#if defined(CONFIG_USBD_HS)
- device_instance->qualifier_descriptor = &qualifier_descriptor;
-#endif
device_instance->event = usbtty_event_handler;
device_instance->cdc_recv_setup = usbtty_cdc_setup;
device_instance->bus = bus_instance;
@@ -755,10 +738,6 @@ static void usbtty_init_terminal_type(short type)
device_descriptor.idProduct =
cpu_to_le16(CONFIG_USBD_PRODUCTID_CDCACM);
-#if defined(CONFIG_USBD_HS)
- qualifier_descriptor.bDeviceClass =
- COMMUNICATIONS_DEVICE_CLASS;
-#endif
/* Assign endpoint indices */
tx_endpoint = ACM_TX_ENDPOINT;
rx_endpoint = ACM_RX_ENDPOINT;
@@ -787,9 +766,6 @@ static void usbtty_init_terminal_type(short type)
device_descriptor.bDeviceClass = 0xFF;
device_descriptor.idProduct =
cpu_to_le16(CONFIG_USBD_PRODUCTID_GSERIAL);
-#if defined(CONFIG_USBD_HS)
- qualifier_descriptor.bDeviceClass = 0xFF;
-#endif
/* Assign endpoint indices */
tx_endpoint = GSERIAL_TX_ENDPOINT;
rx_endpoint = GSERIAL_RX_ENDPOINT;
@@ -937,9 +913,6 @@ static int usbtty_configured (void)
static void usbtty_event_handler (struct usb_device_instance *device,
usb_device_event_t event, int data)
{
-#if defined(CONFIG_USBD_HS)
- int i;
-#endif
switch (event) {
case DEVICE_RESET:
case DEVICE_BUS_INACTIVE:
@@ -950,29 +923,6 @@ static void usbtty_event_handler (struct usb_device_instance *device,
break;
case DEVICE_ADDRESS_ASSIGNED:
-#if defined(CONFIG_USBD_HS)
- /*
- * is_usbd_high_speed routine needs to be defined by
- * specific gadget driver
- * It returns true if device enumerates at High speed
- * Retuns false otherwise
- */
- for (i = 0; i < NUM_ENDPOINTS; i++) {
- if (((ep_descriptor_ptrs[i]->bmAttributes &
- USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_BULK)
- && is_usbd_high_speed()) {
-
- ep_descriptor_ptrs[i]->wMaxPacketSize =
- CONFIG_USBD_SERIAL_BULK_HS_PKTSIZE;
- }
-
- endpoint_instance[i + 1].tx_packetSize =
- ep_descriptor_ptrs[i]->wMaxPacketSize;
- endpoint_instance[i + 1].rcv_packetSize =
- ep_descriptor_ptrs[i]->wMaxPacketSize;
- }
-#endif
usbtty_init_endpoints ();
default:
@@ -51,10 +51,6 @@
#define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE
#define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE
-#if defined(CONFIG_USBD_HS)
-#define CONFIG_USBD_SERIAL_BULK_HS_PKTSIZE UDC_BULK_HS_PACKET_SIZE
-#endif
-
#define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS
#define USBTTY_BCD_DEVICE 0x00
@@ -371,26 +371,7 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
}
break;
case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
-#if defined(CONFIG_USBD_HS)
- {
- struct usb_qualifier_descriptor *qualifier_descriptor =
- device->qualifier_descriptor;
-
- if (!qualifier_descriptor)
- return -1;
-
- /* copy descriptor for this device */
- copy_config(urb, qualifier_descriptor,
- sizeof(struct usb_qualifier_descriptor),
- max);
-
- }
- dbg_ep0(3, "copied qualifier descriptor, actual_length: 0x%x",
- urb->actual_length);
-#else
return -1;
-#endif
- break;
default:
return -1;
@@ -28,8 +28,6 @@
/* Host */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-/* Client */
-#define CONFIG_USBD_HS
/* Framebuffer and LCD */
@@ -126,8 +126,6 @@
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USBD_HS
-
/* USB Device Firmware Update support */
#define DFU_DEFAULT_POLL_TIMEOUT 300
@@ -25,8 +25,6 @@
/* Host */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-/* Client */
-#define CONFIG_USBD_HS
/* Command definition */
@@ -170,6 +170,4 @@
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USBD_HS
-
#endif
@@ -26,7 +26,6 @@
/* USB */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USBD_HS
/* Memory */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
@@ -38,7 +38,6 @@
/* USB Configs */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USBD_HS
/* Miscellaneous configurable options */
@@ -81,6 +81,4 @@
/* USB Configs */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USBD_HS
-
#endif /* __CONFIG_H */
@@ -27,8 +27,6 @@
#define CFG_SYS_FSL_USDHC_NUM 2
-#define CONFIG_USBD_HS
-
#define CONSOLE_ON_UART1
#ifdef CONSOLE_ON_UART1
@@ -145,6 +145,4 @@
/* Environment organization */
-#define CONFIG_USBD_HS
-
#endif /* __MX6QSABRE_COMMON_CONFIG_H */
@@ -101,6 +101,4 @@
/* USB Configs */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USBD_HS
-
#endif /* __CONFIG_H */
@@ -11,8 +11,6 @@
#include "mx6_common.h"
-#define CONFIG_USBD_HS
-
#define CONFIG_MXC_UART_BASE UART2_BASE
/* MMC Configs */
@@ -55,8 +55,6 @@
#ifdef CONFIG_CMD_USB
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-/* Gadget part */
-#define CONFIG_USBD_HS
#endif
/* Extra U-Boot environment. */
@@ -26,8 +26,6 @@
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USBD_HS
-
#define DFU_DEFAULT_POLL_TIMEOUT 300
#define CONFIG_DFU_ENV_SETTINGS \
@@ -70,9 +70,6 @@
* we don't need to do it twice.
*/
-/* USB DRACO ID as default */
-#define CONFIG_USBD_HS
-
/* USB Device Firmware Update support */
#define DFU_MANIFEST_POLL_TIMEOUT 25000
@@ -28,9 +28,6 @@
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#ifdef CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USBD_HS
-#endif /* CONFIG_CMD_USB_MASS_STORAGE */
#endif /* CONFIG_CMD_USB */
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -95,8 +95,6 @@
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USBD_HS
-
/* USB Device Firmware Update support */
#define DFU_DEFAULT_POLL_TIMEOUT 300
@@ -227,21 +227,6 @@ struct usb_device_descriptor {
u8 bNumConfigurations;
} __attribute__ ((packed));
-#if defined(CONFIG_USBD_HS)
-struct usb_qualifier_descriptor {
- u8 bLength;
- u8 bDescriptorType;
-
- u16 bcdUSB;
- u8 bDeviceClass;
- u8 bDeviceSubClass;
- u8 bDeviceProtocol;
- u8 bMaxPacketSize0;
- u8 bNumConfigurations;
- u8 breserved;
-} __attribute__ ((packed));
-#endif
-
struct usb_string_descriptor {
u8 bLength;
u8 bDescriptorType; /* 0x03 */
@@ -196,10 +196,6 @@ struct usb_bus_instance;
#define USB_DT_INTERFACE 0x04
#define USB_DT_ENDPOINT 0x05
-#if defined(CONFIG_USBD_HS)
-#define USB_DT_QUAL 0x06
-#endif
-
#define USB_DT_HID (USB_TYPE_CLASS | 0x01)
#define USB_DT_REPORT (USB_TYPE_CLASS | 0x02)
#define USB_DT_PHYSICAL (USB_TYPE_CLASS | 0x03)
@@ -279,11 +275,7 @@ struct usb_bus_instance;
* USB Spec Release number
*/
-#if defined(CONFIG_USBD_HS)
-#define USB_BCD_VERSION 0x0200
-#else
#define USB_BCD_VERSION 0x0110
-#endif
/*
@@ -552,9 +544,6 @@ struct usb_device_instance {
/* generic */
char *name;
struct usb_device_descriptor *device_descriptor; /* per device descriptor */
-#if defined(CONFIG_USBD_HS)
- struct usb_qualifier_descriptor *qualifier_descriptor;
-#endif
void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data);
@@ -644,14 +633,6 @@ struct usb_string_descriptor *usbd_get_string (u8);
struct usb_device_descriptor *usbd_device_device_descriptor(struct
usb_device_instance *, int);
-#if defined(CONFIG_USBD_HS)
-/*
- * is_usbd_high_speed routine needs to be defined by specific gadget driver
- * It returns true if device enumerates at High speed
- * Retuns false otherwise
- */
-int is_usbd_high_speed(void);
-#endif
int usbd_endpoint_halted (struct usb_device_instance *device, int endpoint);
void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad);
void usbd_tx_complete (struct usb_endpoint_instance *endpoint);
This define is not enabled by the only platform which currently enables the legacy option of CONFIG_USB_DEVICE. We can drop this code. Signed-off-by: Tom Rini <trini@konsulko.com> --- README | 8 ----- drivers/serial/usbtty.c | 50 -------------------------- drivers/serial/usbtty.h | 4 --- drivers/usb/gadget/ep0.c | 19 ---------- include/configs/apalis_imx6.h | 2 -- include/configs/colibri-imx6ull.h | 2 -- include/configs/colibri_imx6.h | 2 -- include/configs/colibri_imx7.h | 2 -- include/configs/ge_b1x5v2.h | 1 - include/configs/gw_ventana.h | 1 - include/configs/imx7-cm.h | 2 -- include/configs/librem5.h | 2 -- include/configs/mx6sabre_common.h | 2 -- include/configs/mx7dsabresd.h | 2 -- include/configs/nitrogen6x.h | 2 -- include/configs/novena.h | 2 -- include/configs/pico-imx6ul.h | 2 -- include/configs/siemens-am33x-common.h | 3 -- include/configs/tbs2910.h | 3 -- include/configs/warp7.h | 2 -- include/usbdescriptors.h | 15 -------- include/usbdevice.h | 19 ---------- 22 files changed, 147 deletions(-)