new file mode 100644
@@ -0,0 +1,73 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_versal_mini_qspi"
+CONFIG_COUNTER_FREQUENCY=100000000
+CONFIG_ARCH_VERSAL=y
+CONFIG_SYS_TEXT_BASE=0xFFFC0000
+CONFIG_SYS_MALLOC_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x80
+CONFIG_DEFAULT_DEVICE_TREE="versal-mini-qspi-single"
+CONFIG_SYS_PROMPT="Versal> "
+CONFIG_SYS_MEM_RSVD_FOR_MMU=y
+CONFIG_VERSAL_NO_DDR=y
+# CONFIG_PSCI_RESET is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
+# CONFIG_EXPERT is not set
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+# CONFIG_AUTOBOOT is not set
+CONFIG_LOGLEVEL=0
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_BOARD_LATE_INIT is not set
+# CONFIG_CMDLINE_EDITING is not set
+# CONFIG_AUTO_COMPLETE is not set
+# CONFIG_SYS_LONGHELP is not set
+# CONFIG_SYS_XTRACE is not set
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTM is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_FDT is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_RUN is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_ECHO is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG is not set
+# CONFIG_NET is not set
+# CONFIG_DM_WARN is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+# CONFIG_GPIO is not set
+# CONFIG_I2C is not set
+# CONFIG_INPUT is not set
+# CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=30000000
+# CONFIG_SPI_FLASH_SMART_HWCAPS is not set
+# CONFIG_SPI_FLASH_UNLOCK_ALL is not set
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+# CONFIG_POWER is not set
+CONFIG_ARM_DCC=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
+# CONFIG_LMB is not set
Add configuration file for mini u-boot configuration which runs on a smaller footprint from on chip memory(OCM). This configuration has required CONFIG's enabled to support qspi flash and uses DCC terminal for console output. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> --- Changes in v2: - Removed configs/xilinx_* from MAINTAINERS as, it is already taken care. - Run savedefconfig and updated mini config to align with latest Kconfig layout configs/xilinx_versal_mini_qspi_defconfig | 73 +++++++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 configs/xilinx_versal_mini_qspi_defconfig