| Message ID | 20221003140115.386074-1-festevam@denx.de |
|---|---|
| State | Accepted |
| Commit | a2bf0373b81e80a6a7a4bda178a46bb9fde4e7b3 |
| Headers | show |
| Series | [v2] imx8mn-venice-u-boot: Fix broken boot | expand |
On Mon, Oct 03, 2022 at 11:01:15AM -0300, Fabio Estevam wrote: > When the imx8mn.dtsi file was pulled in from Linux, the UARTs > were moved into an spba sub-node which wasn't being included > in the SPL device tree. This meant the references to the UART > weren't being handled properly and when booting the system would > constantly reboot. Fix this by adding the spba node to the spl > device tree to restore normal booting. > > Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot > board. > > Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux") > Signed-off-by: Fabio Estevam <festevam@denx.de> Applied to u-boot/master, thanks!
diff --git a/arch/arm/dts/imx8mn-venice-u-boot.dtsi b/arch/arm/dts/imx8mn-venice-u-boot.dtsi index 9fb3871452..9debf9675d 100644 --- a/arch/arm/dts/imx8mn-venice-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-venice-u-boot.dtsi @@ -20,6 +20,10 @@ u-boot,dm-spl; }; +&spba1 { + u-boot,dm-spl; +}; + &clk { u-boot,dm-spl; u-boot,dm-pre-reloc;
When the imx8mn.dtsi file was pulled in from Linux, the UARTs were moved into an spba sub-node which wasn't being included in the SPL device tree. This meant the references to the UART weren't being handled properly and when booting the system would constantly reboot. Fix this by adding the spba node to the spl device tree to restore normal booting. Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot board. Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux") Signed-off-by: Fabio Estevam <festevam@denx.de> --- Changes since v1: - Fix typo in commit log: imx8mm.dtsi--> imx8mn.dtsi Hi Tim, Could you please test this patch? It fixes boot regression on imx8mn-evk and imx8mn-beacon. arch/arm/dts/imx8mn-venice-u-boot.dtsi | 4 ++++ 1 file changed, 4 insertions(+)