| Message ID | 20220914080210.14103-1-heiko.thiery@gmail.com |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | kontron_pitx_imx8m: enlarge SYS_MALLOC_F_LEN | expand |
Hi Heiko, On Wed, Sep 14, 2022 at 5:02 AM Heiko Thiery <heiko.thiery@gmail.com> wrote: > > There is "alloc space exhausted" that can be seen with DEBUG_UART > options enabled and leeds to an non-functional board. > > CONFIG_DEBUG_UART_BASE=0x30880000 # for serial3 > CONFIG_DEBUG_UART_CLOCK=24000000 > > It is because CONFIG_SYS_MALLOC_F_LEN is too small, enlarge it. And set > CONFIG_SPL_STACK to 0x188000 to not waste the top 16bytes. > > Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
diff --git a/configs/kontron_pitx_imx8m_defconfig b/configs/kontron_pitx_imx8m_defconfig index 284aa6d6b8..a57b5cf552 100644 --- a/configs/kontron_pitx_imx8m_defconfig +++ b/configs/kontron_pitx_imx8m_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_IMX8M=y CONFIG_SYS_TEXT_BASE=0x40200000 CONFIG_SYS_MALLOC_LEN=0x600000 +CONFIG_SYS_MALLOC_F_LEN=0x10000 CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y @@ -35,7 +36,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x180000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK=0x187ff0 +CONFIG_SPL_STACK=0x188000 CONFIG_SYS_SPL_MALLOC=y CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
There is "alloc space exhausted" that can be seen with DEBUG_UART options enabled and leeds to an non-functional board. CONFIG_DEBUG_UART_BASE=0x30880000 # for serial3 CONFIG_DEBUG_UART_CLOCK=24000000 It is because CONFIG_SYS_MALLOC_F_LEN is too small, enlarge it. And set CONFIG_SPL_STACK to 0x188000 to not waste the top 16bytes. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> --- configs/kontron_pitx_imx8m_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)