Message ID | 20220713031639.1452-1-weijie.gao@mediatek.com |
---|---|
State | Accepted |
Commit | a3ba6adb70c91ec3b9312c3a025faa44acd39cfa |
Delegated to: | Tom Rini |
Headers | show |
Series | arm: dts: mt7622: remove default pinctrl of uart0 | expand |
On Wed, Jul 13, 2022 at 11:16:39AM +0800, Weijie Gao wrote: > Currently u-boot running on mt7622 will print an warning log at beginning: > > serial_mtk serial@11002000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 > > It turns out that the pinctrl uclass can't work properly in board_f stage. > > Since the uart0 is the default UART device used by bootrom, and will be > initialized in both bootrom and tf-a bl2. It's ok not to setup pinctrl for > uart0 in u-boot. > > This patch removes the default pinctrl of uart0 to suppress the unwanted > warning. > > Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Applied to u-boot/master, thanks!
diff --git a/arch/arm/dts/mt7622-bananapi-bpi-r64.dts b/arch/arm/dts/mt7622-bananapi-bpi-r64.dts index 4f2f04851d..2ac933a6ac 100644 --- a/arch/arm/dts/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm/dts/mt7622-bananapi-bpi-r64.dts @@ -182,8 +182,6 @@ }; &uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; status = "okay"; }; diff --git a/arch/arm/dts/mt7622-rfb.dts b/arch/arm/dts/mt7622-rfb.dts index c2f1ad2011..30a9137407 100644 --- a/arch/arm/dts/mt7622-rfb.dts +++ b/arch/arm/dts/mt7622-rfb.dts @@ -189,8 +189,6 @@ }; &uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; status = "okay"; };