diff mbox series

[v2,03/11] ARM: dts: ast2600: Disable I2C nodes by default

Message ID 20220623051041.3848714-4-joel@jms.id.au
State Accepted
Commit fc28e02404846954a6d294184adcd4fe3ced7da9
Delegated to: Tom Rini
Headers show
Series i2c: Improvements for aspeed boards | expand

Commit Message

Joel Stanley June 23, 2022, 5:10 a.m. UTC 
Allow boards to enable the buses they use.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
v2: Fix spelling
---
 arch/arm/dts/ast2600.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Tom Rini July 7, 2022, 1:56 a.m. UTC | #1 
On Thu, Jun 23, 2022 at 02:40:33PM +0930, Joel Stanley wrote:

> Allow boards to enable the buses they use.
> 
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>

Applied to u-boot/next, thanks!
diff mbox series

Patch

diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi
index 4b23d25ede0a..a37d062bcad7 100644
--- a/arch/arm/dts/ast2600.dtsi
+++ b/arch/arm/dts/ast2600.dtsi
@@ -868,6 +868,7 @@ 
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
 	};
 
 	i2c3: i2c@200 {
@@ -883,6 +884,7 @@ 
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
 	};
 
 	i2c4: i2c@280 {
@@ -898,6 +900,7 @@ 
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
 	};
 
 	i2c5: i2c@300 {
@@ -913,6 +916,7 @@ 
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
 	};
 
 	i2c6: i2c@380 {
@@ -928,6 +932,7 @@ 
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
 	};
 
 	i2c7: i2c@400 {
@@ -943,6 +948,7 @@ 
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
 	};
 
 	i2c8: i2c@480 {
@@ -958,6 +964,7 @@ 
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
 	};
 
 	i2c9: i2c@500 {