diff mbox series

[v2,02/11] ARM: dts: ast2600: Add I2C reset properties

Message ID 20220623051041.3848714-3-joel@jms.id.au
State Accepted
Commit a87273bc4085854584a19abb65da7562c0967f9e
Delegated to: Tom Rini
Headers show
Series i2c: Improvements for aspeed boards | expand

Commit Message

Joel Stanley June 23, 2022, 5:10 a.m. UTC 
The same as the upstream Linux device tree, each i2c bus has a property
specifying the reset line.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
 arch/arm/dts/ast2600.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Comments

Tom Rini July 7, 2022, 1:56 a.m. UTC | #1 
On Thu, Jun 23, 2022 at 02:40:32PM +0930, Joel Stanley wrote:

> The same as the upstream Linux device tree, each i2c bus has a property
> specifying the reset line.
> 
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>

Applied to u-boot/next, thanks!
diff mbox series

Patch

diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi
index ef5b131ac0af..4b23d25ede0a 100644
--- a/arch/arm/dts/ast2600.dtsi
+++ b/arch/arm/dts/ast2600.dtsi
@@ -832,6 +832,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1_default>;
@@ -847,6 +848,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2_default>;
@@ -862,6 +864,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3_default>;
@@ -876,6 +879,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c4_default>;
@@ -890,6 +894,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c5_default>;
@@ -904,6 +909,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c6_default>;
@@ -918,6 +924,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c7_default>;
@@ -932,6 +939,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c8_default>;
@@ -946,6 +954,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c9_default>;
@@ -960,6 +969,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c10_default>;
@@ -975,6 +985,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c11_default>;
@@ -990,6 +1001,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c12_default>;
@@ -1005,6 +1017,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c13_default>;
@@ -1020,6 +1033,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c14_default>;
@@ -1035,6 +1049,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c15_default>;
@@ -1050,6 +1065,7 @@ 
 		compatible = "aspeed,ast2600-i2c-bus";
 		bus-frequency = <100000>;
 		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&rst ASPEED_RESET_I2C>;
 		clocks = <&scu ASPEED_CLK_APB2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c16_default>;