@@ -172,8 +172,8 @@ Flashing
SD Card
^^^^^^^
-All Rockchip platforms (except rk3128 which doesn't use SPL) are now
-supporting a single boot image using binman and pad_cat.
+All Rockchip platforms, (except rk3128 which doesn't use SPL) generate a
+SD/MMC full boot image using binman.
To write an image that boots from a SD card (assumed to be /dev/sda):
@@ -224,31 +224,16 @@ is u-boot-dtb.img
SPI
^^^
-The SPI boot method requires the generation of idbloader.img with help of the mkimage tool.
+Some platforms also generate a SPI flash full boot image, controlled by the
+CONFIG_ROCKCHIP_SPI_IMAGE configuration option.
-SPL-alone SPI boot image:
-
-.. code-block:: bash
-
- ./tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin idbloader.img
-
-TPL+SPL SPI boot image:
-
-.. code-block:: bash
-
- ./tools/mkimage -n rk3399 -T rkspi -d tpl/u-boot-tpl.bin:spl/u-boot-spl.bin idbloader.img
-
-Copy SPI boot images into SD card and boot from SD:
+This image can be copied onto an SD card and written to SPI flash:
.. code-block:: bash
sf probe
- load mmc 1:1 $kernel_addr_r idbloader.img
- sf erase 0 +$filesize
- sf write $kernel_addr_r 0 ${filesize}
- load mmc 1:1 ${kernel_addr_r} u-boot.itb
- sf erase 0x60000 +$filesize
- sf write $kernel_addr_r 0x60000 ${filesize}
+ load mmc 1:1 $kernel_addr_r u-boot-rockchip-spi.bin
+ sf update $kernel_addr_r 0 ${filesize}
2. Package the image with Rockchip miniloader
---------------------------------------------
Update the Rockchip documentation for image generation with binman, including the new automatically-created SPI image. Signed-off-by: Andrew Abbott <andrew@mirx.dev> --- Changes in v2: - Remove note from docs about different offsets in SPI flash for different SoCs - this was a bad assumption on my part, it doesn't work this way. - Update name of SD/MMC image in the docs from u-boot-rockchip-sdmmc.bin to u-boot-rockchip.bin. doc/board/rockchip/rockchip.rst | 29 +++++++---------------------- 1 file changed, 7 insertions(+), 22 deletions(-)