diff mbox series

[v1,17/17] rockchip: configs: mk808: enable usb support

Message ID 20220508150825.21711-18-jbx6244@gmail.com
State Changes Requested
Delegated to: Kever Yang
Headers show
Series Add rk3066 ADC and USB support | expand

Commit Message

Johan Jonker May 8, 2022, 3:08 p.m. UTC 
Enable usb support in the mk808_defconfig.
Add adc button in full and spl mode to do
an action on user demand.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 configs/mk808_defconfig | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/configs/mk808_defconfig b/configs/mk808_defconfig
index 20bca75a..6ae41a23 100644
--- a/configs/mk808_defconfig
+++ b/configs/mk808_defconfig
@@ -26,6 +26,7 @@  CONFIG_SPL_FS_FAT=y
 CONFIG_SYS_LOAD_ADDR=0x70800800
 CONFIG_SPL_PAYLOAD="u-boot.bin"
 CONFIG_DEBUG_UART=y
+# CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_SD_BOOT=y
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3066a-mk808.dtb"
@@ -35,14 +36,23 @@  CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x200000
 CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_FS_EXT4=y
 CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=2
+CONFIG_SPL_MMC_WRITE=y
+CONFIG_SPL_USB_HOST=y
+CONFIG_SPL_USB_STORAGE=y
+CONFIG_SPL_USB_GADGET=y
 CONFIG_TPL_NEEDS_SEPARATE_STACK=y
 # CONFIG_BOOTM_PLAN9 is not set
 # CONFIG_BOOTM_RTEMS is not set
 # CONFIG_BOOTM_VXWORKS is not set
+CONFIG_CMD_ADC=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
@@ -51,7 +61,6 @@  CONFIG_SPL_OF_CONTROL=y
 CONFIG_TPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_OF_DTB_PROPS_REMOVE=y
-CONFIG_SPL_OF_PLATDATA=y
 CONFIG_TPL_OF_PLATDATA=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_NET is not set
@@ -65,10 +74,13 @@  CONFIG_SPL_SYSCON=y
 CONFIG_TPL_SYSCON=y
 # CONFIG_SIMPLE_BUS is not set
 # CONFIG_SPL_SIMPLE_BUS is not set
+CONFIG_SPL_ADC=y
+CONFIG_SPL_SARADC_ROCKCHIP=y
 # CONFIG_TPL_BLK is not set
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_TPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x80000000
 CONFIG_ROCKCHIP_GPIO=y
 # CONFIG_SPL_DM_I2C is not set
 CONFIG_LED=y
@@ -97,6 +109,13 @@  CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_TPL_TIMER=y
 CONFIG_DESIGNWARE_APB_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_ROCKCHIP_USB2_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
+CONFIG_SPL_USB_FUNCTION_ROCKUSB=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
 # CONFIG_TPL_OF_LIBFDT is not set